Abstract
Biodegradable injectable polymers (IPs) that exhibit temperature-responsive sol–gel transitions have recently drawn much attention as promising biomedical materials, such as in drug delivery systems, cell implantation, and tissue engineering. Typical examples of temperature-responsive IPs are block copolymers of poly(ethylene glycol) (PEG) and aliphatic polyesters. The use of biodegradable IP systems in clinical applications has faced several issues. In this review, after a brief introduction of IP systems, our recent progress on controllable IP systems using simple mixing strategies is introduced. Control of the gelation pH region of a dual-stimuli (both temperature and pH)-responsive IP system was achieved by changing the mixing ratio of cationic and anionic polymers. Temperature-triggered covalent (irreversible) gelation systems were developed by mixing IPs with reactive termini and appropriate cross-linker molecules. The duration of the gel state (decomposition period) of IP hydrogels was easily controlled by changing the mixing ratio of the components. The developed biodegradable IP systems with controllable properties are promising for future applications in clinical stages.
Similar content being viewed by others
Log in or create a free account to read this content
Gain free access to this article, as well as selected content from this journal and more on nature.com
or
References
Nagahama K, Takahashi A, Ohya Y. Biodegradable polymers exhibiting temperature-responsive sol–gel transition as injectable biomedical materials. React Funct Polym. 2013;73:979–85.
Park MH, Joo MK, Choi BG, Jeong B. Biodegradable thermogels. Acc Chem Res. 2012;45:424–33.
Moon HJ, Ko DY, Park MH, Joo MK, Jeong B. Temperature-responsive compounds as in situ gelling biomedical materials. Chem Soc Rev. 2012;41:4860–83.
Ohya Y, Takahashi A, Nagahama K. Biodegradable polymeric assemblies for biomedical materials. Adv Polym Sci. 2012;247:65–114.
Yu L, Ding J. Injectable hydrogels as unique biomedical materials. Chem Soc Rev. 2008;37:1473–81.
Jeong B, Kim SW, Bae YH. Thermosensitive sol–gel reversible hydrogels. Adv Drug Deliv Rev. 2002;54:37–51.
Kissel T, Li Y, Unger F. ABA-triblock copolymers from biodegradable polyester A-blocks and hydrophilic poly(ethylene oxide) B-blocks as a candidate for in situ forming hydrogel delivery systems for proteins. Adv Drug Deliv Rev. 2002;54:99–134.
Liow SS, Dou Q, Kai D, Karim AA, Zhang K, Xu F, Loh XJ. Thermogels: in situ gelling biomaterial. ACS Biomater Sci Eng. 2016;2:295–316.
Choi S, Baudys M, Kim SW. Control of blood glucose by novel GLP-1 delivery using biodegradable triblock copolymer of PLGA-PEG-PLGA in type 2 diabetic rats. Pharm Res. 2004;21:827–31.
Manokruang K, Lee DS. Albumin-conjugated pH/thermo responsive poly(amino urethane) multiblock copolymer as an injectable hydrogel for protein delivery. Macromol Biosci. 2013;13:1195–203.
Li K, Yu L, Liu X, Chen C, Chen Q, Ding J. A long-acting formulation of a polypeptide drug exenatide in treatment of diabetes using an injectable block copolymer hydrogel. Biomaterials. 2013;34:2834–42.
Yeon B, Park MH, Moon HJ, Kim S, Cheon YW, Jeong B. 3D culture of adipose-tissue-derived stem cells mainly leads to chondrogenesis in poly(ethylene glycol)-poly(L-alanine) diblock copolymer thermogel. Biomacromolecules. 2013;14:3256–66.
Nagahama K, Ouchi T, Ohya Y. Temperature-induced hydrogels through self-assembly of cholesterol-substituted star PEG-b-PLLA copolymers: an injectable scaffold for tissue engineering. Adv Funct Mater. 2008;18:1220–31.
Oyama N, Minami H, Kawano D, Miyazaki M, Maeda T, Toma K, Hotta A, Nagahama K. A nanocomposite approach to develop biodegradable thermogels exhibiting excellent cell-compatibility for injectable cell delivery. Biomater Sci. 2014;2:1057–62.
Zhang Z, Ni J, Chen L, Yu L, Xu J, Ding J. Biodegradable and thermoreversible PCLA-PEG-PCLA hydrogel as a barrier for prevention of post-operative adhesion. Biomaterials. 2011;32:4725–36.
Yu L, Hu H, Chen L, Bao X, Li Y, Chen L, Xu G, Ye X, Ding J. Comparative studies of thermogels in preventing post-operative adhesions and corresponding mechanisms. Biomater Sci. 2014;2:1100–9.
Hong JH, Choe JW, Kwon GY, Cho DY, Sohn DS, Kim SW, Woo YC, Lee CJ, Kang H. The effects of barrier materials on reduction of pericardial adhesion formation in rabbits: a comparative study of a hyaluronan-based solution and a temperature sensitive poloxamer solution/gel material. J Surg Res. 2011;166:206–13.
Kan P, Lin XZ, Hsieh MF, Chang KY. Thermogelling emulsions for vascular embolization and sustained release of drugs. J Biomed Mater Res. 2005;B75:185–92.
Chen X, Huang L, Sun HJ, Cheng SZD, Zhu M, Yang G. Stimuli-responsive nanocomposite: potential injectable embolization agent. Macromol Rapid Commun. 2014;35:579–84.
Weng L, Rostambeigi N, Zantek ND, Rostamzadeh P, Bravo M, Carey J, Golzarian J. An in situ forming biodegradable hydrogel-based embolic agent for interventional therapies. Acta Biomater. 2013;9:8182–92.
Yu L, Xu W, Shen W, Cao L, Liu Y, Li Z, Ding J. Poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) thermogel as a novel submucosal cushion for endoscopic submucosal dissection. Acta Biomater. 2014;10:1251–8.
Sakai T, Matsunaga T, Yamamoto Y, Ito C, Yoshida R, Suzuki S, Sasaki N, Shibayama M, Chung U. Design and fabrication of a high-strength hydrogel with ideally homogeneous network structure from tetrahedron-like macromonomers. Macromolecules. 2008;41:5379–84.
van Dijk-Wolthuis WNE, Hoogeboom JAM, van Steenbergen MJ, Tsang SKY, Hennink WE. Degradation and release behavior of dextran-based hydrogels. Macromolecules. 1997;30:4639–45.
Park KM, Shin YM, Joung YK, Shin H, Park KD. In situ forming hydrogels based on tyramine conjugated 4-Arm-PPO-PEO via enzymatic oxidative reaction. Biomacromolecules. 2010;11:706–12.
Lee DS, Shim MS, Kim SW, Lee H, Park I, Chang T. Novel thermoreversible gelation of biodegradable PLGA-block-PEO-block-PLGA triblock copolymers in aqueous solution. Macromol Rapid Commun. 2001;22:587–92.
Nagahama K, Fujiura K, Enami S, Ouchi T, Ohya Y. Irreversible temperature-responsive formation of high-strength hydrogel from an enantiomeric mixture of starburst triblock copolymers consisting of 8-arm PEG and PLLA or PDLA. J Polym Sci Part A Polym Chem. 2008;46:6317–32.
Nagahama K, Imai Y, Nakayama T, Ohmura J, Ouchi T, Ohya Y. Thermo-sensitive sol–gel transition of poly(depsipeptide-co-lactide)-g-PEG copolymers in aqueous solution. Polymer. 2009;50:3547–55.
Takahashi A, Umezaki M, Yoshida Y, Kuzuya A, Ohya Y. The effects of molecular structure on sol-to-gel transition of biodegradable poly(depsipeptide-co-lactide)-g-PEG copolymers. J Biomat Sci Polym. 2014;25:444–54.
Takahashi A, Umezaki M, Yoshida Y, Kuzuya A, Ohya Y. A macromolecular prodrug-type injectable polymer composed of poly(depsipeptide-co-lactide)-g-PEG for sustained release of drugs. Polym Adv Technol. 2014;25:1226–33.
Yoshida Y, Takahashi A, Kuzuya A, Ohya Y. Instant preparation of formulation for biodegradable injectable polymers exhibiting temperature-responsive sol-gel transition. Polym J. 2014;46:632–5.
Singh NK, Lee DS. In situ gelling pH- and temperature-sensitive biodegradable block copolymer hydrogels for drug delivery. J Controll Release. 2014;193:214–27.
Shim WS, Kim SW, Lee DS. Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels. Biomacromolecules. 2006;7:1935–41.
Huynh CT, Nguyen MK, Kim JH, Kang SW, Kim BS, Lee DS. Sustained delivery of doxorubicin using biodegradable pH/temperature-sensitive poly(ethylene glycol)-poly(β-amino ester urethane) multiblock copolymer hydrogels. Soft Matter. 2011;7:4974–82.
Huynh CT, Nguyen MK, Lee DS. Dually cationic and anionic pH/temperature-sensitive injectable hydrogels and potential application as a protein carrier. Chem Commun. 2012;48:10951–3.
Schmaljohann D. Thermo-and pH-responsive polymers in drug delivery. Adv Drug Deliv Rev. 2006;58:1655–70.
Yoshida Y, Kawahara K, Mitsumune S, Kuzuya A, Ohya Y. Injectable and biodegradable temperature-responsive mixed polymer systems providing variable gel-forming pH regions. J Biomater Sci Polym Ed. 2017;28:1158–71.
Yoshida Y, Kawahara K, Inamoto K, Mitsumune S, Ichikawa S, Kuzuya A, Ohya Y. Biodegradable injectable polymer systems exhibiting temperature-responsive irreversible sol-to-gel transition by covalent bond formation. ACS Biomater Sci Eng. 2017;3:56–67.
Yoshida Y, Takai H, Kawahara K, Mitsumune S, Takata K, Kuzuya A, Ohya Y. Biodegradable injectable polymer systems exhibiting longer and controllable duration time of the gel state. Biomater Sci. 2017;5:1304–14.
Yoshida Y, Takata K, Takai H, Kawahara K, Kuzuya A, Ohya Y. Extemporaneously preparative biodegradable injectable polymer systems exhibiting temperature-responsive irreversible gelation. J Biomater Sci Polym Ed. 2017;28:1427–43.
Takata K, Kawahara K, Yoshida Y, Kuzuya A, Ohya Y. Analysis of the sol-to-gel transition behavior of temperature-responsive injectable polymer systems by fluorescence resonance energy transfer. Polym J. 2017;49:677–84.
Takata, K, Takai, H, Yoshizaki, Y, Nagata, T, Kawahara, K, Yoshida, Y, et al. Peptide drug release behavior from biodegradable temperature-responsive injectable hydrogels exhibiting irreversible gelation. Gels. 2018;3:38. https://doi.org/10.3390/gels3040038
Acknowledgements
I thank my colleagues, Dr Yasuyuki Yoshida, Dr Yuta Yoshizaki, and Dr Kazuyuki Takata, and the graduate students of the functional polymer laboratory at Kansai University for their efforts in the experiments and helpful discussion. This work was financially supported in part by the Private University Research Branding Project: Matching Fund Subsidy from the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan (2016–2020) and a Grant-in-Aid for Scientific Research ((A), 16H01854) from the Japan Society for the Promotion of Science (JSPS).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author declares that he has no conflict of interest.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ohya, Y. Temperature-responsive biodegradable injectable polymer systems with conveniently controllable properties. Polym J 51, 997–1005 (2019). https://doi.org/10.1038/s41428-019-0217-0
Received:
Revised:
Accepted:
Published:
Version of record:
Issue date:
DOI: https://doi.org/10.1038/s41428-019-0217-0
This article is cited by
-
Fabrication of lipid-modified drug nanocrystals loaded injectable hydrogel for breast cancer therapy
Discover Nano (2025)
-
Crystallographic, structural, optical, and dielectric properties of aniline and aniline halide imprinted hydrogels for optoelectronic applications
Journal of Materials Science: Materials in Electronics (2023)
-
Highly porous and injectable hydrogels derived from cartilage acellularized matrix exhibit reduction and NIR light dual-responsive drug release properties for application in antitumor therapy
NPG Asia Materials (2022)
-
Development of a spray-type adhesion barrier
Polymer Journal (2020)
-
Poly(ethylene glycol)-based biofunctional hydrogels mediated by peroxidase-catalyzed cross-linking reactions
Polymer Journal (2020)
