Fig. 1: Basic characterization. | npj Flexible Electronics

Fig. 1: Basic characterization.

From: A new route to fabricate flexible, breathable composites with advanced thermal management capability for wearable electronics

Fig. 1: Basic characterization.The alternative text for this image may have been generated using AI.

a The fabrication process of the composite. b, c Photographs of the patterned electrospun TPU fibrous membrane, which was analogous to the metal collector. d, e SEM images of the patterned electrospun TPU fibers. Relative alignment of the fibers can be found on the warps and wefts. f Photograph of the sample covered with Ecoflex-BNNSs layers on the fibrous grids. g, h Cross-sectional SEM images of the fibrous grids covered with Ecoflex-BNNSs layers. i Even after depositing the Ecoflex-BNNSs layer, the pores among the warps and wefts remained the breathability of the composite (Insert is the enlarged SEM image of the fibers among the grids after coating Ecoflex-BNNSs layer).

Back to article page