Abstract
Skin electrodes are increasingly employed not only in biomedical devices but also for continuous monitoring of users’ health and psychological states in daily life. This trend demand drives the need for developing highly user-friendly multi-purpose skin electrodes which require soft, conformable, breathable, and close-to-transparent electrical materials/structures, leading to stable electrophysiological recording and long-term wearing comfort on skin. Herein, we report a grid-structured PEDOT:PSS fiber net for user-friendly free-standing skin electrodes by judiciously self-fusing highly-conductive PEDOT:PSS fibers. Self-fused PEDOT:PSS fiber grids achieve both high optical transparency (>98%) and a low sheet resistance of ~100 Ω sq−1 through optimization of constituent fiber diameter and grid pitch. Simultaneously, the grid architecture remains stable under humid conditions and accommodates ~30% deformation with marginal electrical performance loss, enabling reliable acquisition of bioelectrical signal on skin in conjunction with electrospun PVA–PAA nanofibers soaked with ion gel for improved skin adhesion and guaranteed moisture permeability. The resultant transparent free-standing skin electrodes successfully record various types of bioelectrical signals (e.g., ECG, EMG, and EOG) with baseline noise levels comparable to conventional Ag/AgCl gel electrodes and a signal-to-noise ratio of up to ~30 dB for 3 days. Finally, they are capable of capturing facial muscle activities, highlighting the potential for user-friendly facial EMG recording/analysis and human emotion detection.
Similar content being viewed by others
Acknowledgements
This work was supported by a National Research Foundation (NRF) grant funded by the Korean government (RS-2024-00341762, RS-2024-00436867, and RS-2022-NR119715), the InnoCORE program of the Ministry of Science and ICT (GIST InnoCORE KH0860), and the GIST-IREF from Gwangju Institute of Science and Technology. N. K. acknowledges the Swedish Research Council (No. 2020-05218 and No. 2025-05852) and the Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No. 2009-00971) for financial support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
About this article
Cite this article
Lee, J., Lee, DY., Kim, Y. et al. Conductive fiber-based free-standing grid electrodes for user-friendly facial muscle movement detection. npj Flex Electron (2026). https://doi.org/10.1038/s41528-026-00591-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41528-026-00591-z
