Figure 1
From: Facile fabrication of complex networks of memristive devices
Switching events in SCBD Au-glass thin film. (a) Detailed view of initial switching events. Each event is labelled with a coloured symbol. Top: the resistance changes as a function of time (R(t)). Bottom: the voltage ramp (V(t)), in this case between 0 and Vmax = 40 V. (b) Much longer switching sequence; the first 40 s corresponds to the data in (a). (c) R(V) and I(V) curves corresponding to switching events reported in (a). R(V) curves are offset for clarity. The first voltage ramps are shown in bright green and the last in deep blue. Alternate curves correspond to increases and decreases in voltage. (d) Comparison between the switching behaviour of the devices near the end of the first (left panel) and second (right panel) days of measurements.
