Figure 1 | Scientific Reports

Figure 1

From: FABRICA: A Bioreactor Platform for Printing, Perfusing, Observing, & Stimulating 3D Tissues

Figure 1

FABRICA Design. (a) FABRICA Bioreactor system with the interchangeable lid installed. (b) FABRICA bioreactor showing the inlet and outlet ports, how the camera mount is installed onto the camera port, and a tissue construct loaded on Kenzan microneedles within the bioreactor chamber. (c) Top-down cutaway showing how constructs are perfused within the FABRICA. (d) Representative quarter section rendering of a hollow Kenzan with a perfusible tissue construct loaded onto the needles. (e) A top down rendering of the construct on the Kenzan showing the 2 mm diameter opening for perfusive flow.

Back to article page