Figure 6 | Scientific Reports

Figure 6

From: Surface nanogrooving of carbon microtubes

Figure 6The alternative text for this image may have been generated using AI.

(a) SEM image of the longitudinal fracture surface of Chitosan/Carbonized cellulose microtubes (CH/CCMT). (b) SEM images of the longitudinal fracture surface of Chitosan/Nanogrooved carbonized cellulose microtubes (CH/NGCCMT). (c) SEM image of cross section of the printed CH/CCMT. (d) SEM image of the cross section of the printed CH/NGCCMT. (e,f) Demonstration of printed patterns using CH/NGCCMT. (g) Typical stress-strain curves of the printed fibres. (h) Confocal microscopy roughness measurements of the 3D printed fibres.

Back to article page