Table 3 Factors of statistical design of experiments for tensile measurements of the non- conductive and conductive 3D-PPOT materials and deformation of the textiles prior to printing process.

From: Stress, strain and deformation of poly-lactic acid filament deposited onto polyethylene terephthalate woven fabric through 3D printing process

Factors

Values

Platform temperature

25, 60 and 100 °C

Weft density of the fabric

14, 18 and 22 picks/inch

Warp density of the fabric

20 picks/inch

Fabric direction

Machine (in warp yarn direction) and Cross (in weft yarn direction)

Fabric pattern

Plain or Twill 2/2 shown in Figure 1(a,b) respectively

Back to article page