Table 1 Parameters used to build the surrogate model together with their units and final intervals.
From: Modelling parametric uncertainty in large-scale stratigraphic simulations
Nr | Description | Unit | Final range |
|---|---|---|---|
2 | Sediment position source 1 | km | 40–85 |
6 | Sediment supply source 1 at 113 Ma | km3/My | 0–160 |
9 | Sediment supply source 1 at 47 Ma | km3/My | 0–150 |
19 | Sand supply percentage source 1 at 146 Ma | – | 5–20 |
20 | Sand supply percentage source 1 at 130 Ma | – | 5–20 |
37 | Sediment supply source 2 at 146 Ma | km3/My | 300–1050 |
39 | Sediment supply source 2 at 129 Ma | km3/My | 550–1300 |
42 | Sediment supply source 2 at 66 Ma | km3/My | 200–450 |
43 | Sediment supply source 2 at 47 Ma | km3/My | 400–550 |
53 | Sand supply percentage source 2 at 146 Ma | – | 5–15 |
54 | Sand supply percentage source 2 at 130 Ma | – | 5–12.5 |
55 | Sand supply percentage source 2 at 129 Ma | – | 5–15 |
58 | Sand supply percentage source 2 at 66 Ma | – | 5–15 |
59 | Sand supply percentage source 2 at 47 Ma | – | 5–15 |
71 | Max compact carbonate production at 90 Ma | m/My | 5–35 |
83 | Initial silt porosity | – | 33–37 |
97 | High energy marine silt coefficient | km2/Ky | 0.2–1.5 |
107 | Slope driven marine silt coefficient | km2/Ky | 0–0.5644 |
126 | High-low water discharge ratio | – | 0–30 |
139 | Erosion basement thickness | m | 0–30 |
