Table 1 Success rate of PLA and CB/PLA parts (using the same geometry of the electrodes) made using varying nozzle diameters, where n = 10.

From: Influence of instrument parameters on the electrochemical activity of 3D printed carbon thermoplastic electrodes

Nozzle diameter (mm)

PLA part print success rate (%)

CB/PLA part print success rate (%)

0.3

100

20

0.35

100

30

0.5

100

80

0.6

100

90

  1. All printed parts were made at 50 °C heated bed temperature and 230 °C extruder temperature.
Back to article page