Table 2 Comparison of surface parameters between the original grind surface and the reconstructed grind surface.
From: Multiscale characterization and contact performance analysis of machining surfaces
The statistical parameters | Area 1 | Mean value | The model of this article | The method of reference14 | The method of reference16 | Relative error of this article (%) | Relative error of reference14 (%) | Relative error of reference16 (%) |
|---|---|---|---|---|---|---|---|---|
Sa (um) | 0.16289 | 0.13572 | 0.13529 | 0.13530 | 0.13500 | 0.31365 | 0.30778 | 0.52939 |
Sq (um) | 0.19539 | 0.16493 | 0.16433 | 0.16434 | 0.16410 | 0.36024 | 0.36969 | 0.50059 |
Ssk (–) | − 0.07602 | − 0.09164 | − 0.08972 | − 0.08972 | − 0.08477 | 2.08908 | 2.45852 | 7.49015 |
Sku (–) | 2.51196 | 2.26122 | 2.61332 | 2.61234 | 2.60601 | 0.30154 | 0.33913 | 0.57745 |
Sp (mm) | 8.54103 | 8.54104 | 8.54103 | 8.54102 | 8.54103 | 1.19E-04 | 1.34E-04 | 1.19E-04 |
Sv (mm) | 8.53979 | 8.53979 | 8.53976 | 8.53980 | 8.53977 | 4.46E-04 | 6.64E-05 | 3.38E-04 |
Sz (um) | 1.23868 | 1.23868 | 1.26657 | 1.2216 | 1.25741 | 2.25178 | 1.38059 | 1.51181 |
Sdq (–) | 72.94016 | 72.94007 | 72.94007 | 72.94007 | 72.94007 | 3.09E-09 | 6.95E-09 | 6.57E-06 |
Sdr (%) | 0.00657 | 0.005880 | 0.005755 | 0.005753 | 0.005759 | 2.11054 | 2.14408 | 2.05139 |
