Table 1 Geometry of the proposed antenna.
From: Additive manufacturing in compact high-gain wideband antennas operating in mm-wave frequencies
Subreflector | |||
\(\mathrm{b }(\mathrm{mm})\) | \(10.7\) | \({\mathrm{L}}_{1} \left(\mathrm{mm}\right)\) | \(10.4\) |
\(\mathrm{c }(\mathrm{mm})\) | \(12.9\) | \({\mathrm{L}}_{2} \left(\mathrm{mm}\right)\) | \(24.6\) |
\({\mathrm{r}}_{\mathrm{s}} (\mathrm{mm})\) | \(16.1\) | \(\mathrm{\alpha }(^\circ )\) | \(24.6\) |
\(\mathrm{h }(\mathrm{mm})\) | \(9.6\) | \(\mathrm{D }\left(\mathrm{mm}\right)\) | \(13.9\) |
Reflector | |||
Focal length \((\mathrm{mm})\) | 42.2 | Diameter \((\mathrm{mm})\) | \(107.1\) |
