Correction to: Scientific Reports, https://doi.org/10.1038/s41598-023-37913-4, published online 1 July 2023
The Funding section in the original version of this Article was incomplete. It now reads:
“Open Access funding enabled and organized by Projekt DEAL. This publication was funded by the German Research Foundation (DFG).”
The original Article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Amavisca, C.V., Bergmann, L., de L. Lessa, C.R. et al. Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625. Sci Rep 13, 11959 (2023). https://doi.org/10.1038/s41598-023-39136-z
Published:
Version of record:
DOI: https://doi.org/10.1038/s41598-023-39136-z
This article is cited by
-
Novel Proposal for Dissimilar Girth Welding of API 5 L X65 Steel Pipe with Internal Alloy 625 Cladding Using Both Low-Alloy Steel and Alloy 22 Combined Filler Metals
Metallurgical and Materials Transactions A (2024)
