Table 4 ANOVA results of reduced cubic model (exploitation zone is a response) for AZ61Mg alloy.
From: Surface quality and dry sliding wear behavior of AZ61Mg alloy using Abbott firestone technique
Source | Sum of squares | df | Mean square | F-value | p-value | |
|---|---|---|---|---|---|---|
Model | 480.93 | 7 | 68.70 | 124.53 | < 0.0001 | Significant |
A-Linear velocity | 112.50 | 1 | 112.50 | 203.91 | < 0.0001 | |
B-Pressure | 72.00 | 1 | 72.00 | 130.50 | < 0.0001 | |
AB | 121.00 | 1 | 121.00 | 219.31 | < 0.0001 | |
A2 | 5.93 | 1 | 5.93 | 10.75 | 0.0220 | |
B2 | 136.67 | 1 | 136.67 | 247.71 | < 0.0001 | |
A2B | 27.00 | 1 | 27.00 | 48.94 | 0.0009 | |
AB2 | 133.33 | 1 | 133.33 | 241.67 | < 0.0001 | |
Residual | 2.76 | 5 | 0.5517 | |||
Lack of fit | 2.76 | 1 | 2.76 | |||
Pure error | 0.0000 | 4 | 0.0000 | |||
Cor total | 483.69 | 12 | ||||
Std. dev | 0.7428 | R2 | 0.9943 | |||
Mean | 82.85 | Adjusted R2 | 0.9863 | |||
C.V. % | 0.8966 | Predicted R2 | 0.3373 | |||
Adeq precision | 37.7562 | |||||
Factor coding is coded | Sum of squares is Type III—Partial | |||||
