Table 1 Taguchi L27 design for tensile testing.
Run | Nozzle diameter | Raster width | Infill Density | Raster angle |
|---|---|---|---|---|
1 | 0.6 | 0.2 | 100 | 0 |
2 | 0.6 | 0.2 | 100 | 0 |
3 | 0.6 | 0.2 | 100 | 0 |
4 | 0.4 | 0.3 | 75 | 0 |
5 | 0.4 | 0.3 | 75 | 0 |
6 | 0.4 | 0.3 | 75 | 0 |
7 | 0.5 | 0.4 | 50 | 0 |
8 | 0.5 | 0.4 | 50 | 0 |
9 | 0.5 | 0.4 | 50 | 0 |
10 | 0.5 | 0.3 | 100 | 45 |
11 | 0.5 | 0.3 | 100 | 45 |
12 | 0.5 | 0.3 | 100 | 45 |
13 | 0.6 | 0.4 | 75 | 45 |
14 | 0.6 | 0.4 | 75 | 45 |
15 | 0.6 | 0.4 | 75 | 45 |
16 | 0.4 | 0.2 | 50 | 45 |
17 | 0.4 | 0.2 | 50 | 45 |
18 | 0.4 | 0.2 | 50 | 45 |
19 | 0.4 | 0.4 | 100 | 90 |
20 | 0.4 | 0.4 | 100 | 90 |
21 | 0.4 | 0.4 | 100 | 90 |
22 | 0.5 | 0.2 | 75 | 90 |
23 | 0.5 | 0.2 | 75 | 90 |
24 | 0.5 | 0.2 | 75 | 90 |
25 | 0.6 | 0.3 | 50 | 90 |
26 | 0.6 | 0.3 | 50 | 90 |
27 | 0.6 | 0.3 | 50 | 90 |
