Table 3 The working conditions.
Type | Working condition | Traction speed/v (m/s) | rotating speed/n (rad/s) | cutting depth/b (mm) |
|---|---|---|---|---|
A | 1 | 0.07 | 9.5 | 430 |
2 | 0.07 | 9.5 | 480 | |
3 | 0.07 | 9.5 | 530 | |
4 | 0.07 | 9.5 | 580 | |
5 | 0.07 | 9.5 | 630 | |
B | 1 | 0.07 | 7.5 | 530 |
2 | 0.07 | 8.5 | 530 | |
3 | 0.07 | 9.5 | 530 | |
4 | 0.07 | 10.5 | 530 | |
5 | 0.07 | 11.5 | 530 | |
C | 1 | 0.03 | 9.5 | 530 |
2 | 0.05 | 9.5 | 530 | |
3 | 0.07 | 9.5 | 530 | |
4 | 0.09 | 9.5 | 530 | |
5 | 0.11 | 9.5 | 530 |
