Table 5 Test data collected in subsequent manufacturing.
From: A multivariate process quality correlation diagnosis method based on grouping technique
No | Blade contouring error before matching (y1/mm) | Blade contouring error after matching (y2/mm) | Blade positional error (y3/mm) | Blade torsion error (y4/’) |
|---|---|---|---|---|
1 | 0.085 | 0.046 | 0.098 | 2.176 |
2 | 0.077 | 0.037 | 0.092 | 2.148 |
3 | 0.082 | 0.040 | 0.103 | 2.068 |
4 | 0.085 | 0.042 | 0.095 | 2.312 |
5 | 0.074 | 0.036 | 0.086 | 2.277 |
