Table 1 Process parameter taken for G-PETG3,10.
Process parameter | Units | Alternative 1 | Alternative 2 | Alternative 3 | Alternative 4 | Alternative 5 |
|---|---|---|---|---|---|---|
Print speed | mm/s | 30 | 40 | 50 | 60 | 70 |
Travel speed | mm/s | 80 | 85 | 90 | 95 | 100 |
Layer height | mm | 0.3 | 0.25 | 0.2 | 0.15 | 0.1 |
Infill density | % | 55 | 60 | 65 | 70 | 75 |
Extruder temperature | ºC | 230 | 235 | 240 | 245 | 250 |
Platform temperature | ºC | 80 | 85 | 90 | 95 | 100 |
Infill pattern | Line | |||||
