Table 1 FLAG parameters and initial conditions.
From: Modeling the formation of Sedan Crater using the FLAG and HOSS codes
Material property | FLAG initial value |
|---|---|
Alluvium (solid) | Â |
EOS | SESAME ID 711258 |
Pressure | 1e5 Pa |
Density | 2350 kg/m\(^3\)58 |
Bulk modulus | 1.14142e-1 MPa59 |
Yield stress | |
Shear modulus | 7.3e8 Pa59 |
Melt temperature | 1356 K |
Tensile failure | |
Air (gas) | Â |
EOS | \(\gamma\)-law gas |
Pressure | 1e5 Pa |
Density | 1.2922 kg/m\(^3\) |
\(\gamma\) | 1.4 |
Temperature | 273 K |
Source (gas) | Â |
EOS | \(\gamma\)-law gas |
Density | 2350 kg/m\(^3\)58 |
\(\gamma\) | 1.4 |
Energy | 8.1e6 J8 |
