Correction to: Scientific Reports https://doi.org/10.1038/s41598-024-78180-1, published online 18 November 2024
The original version of this Article contained an error in Affiliation 1, which was incorrectly given as ‘Department of Mechanical Engineering, SRM TRP Engineering College, Tiruchirapalli, Tamil Nadu 621105, India’. The correct affiliation is listed below:
Center For Advanced Energy Materials, SRM TRP Engineering College, Tiruchirapalli, Tamil Nadu 621105, India.
The original Article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
About this article
Cite this article
Sudalaimuthu, P., Ali, U. & Sathyamurthy, R. Author Correction: Optimization of process parameters of catalytic pyrolysis using natural zeolite and synthetic zeolites on yield of plastic oil through response surface methodology. Sci Rep 15, 6054 (2025). https://doi.org/10.1038/s41598-025-88771-1
Published:
Version of record:
DOI: https://doi.org/10.1038/s41598-025-88771-1
