Fig. 24 | Scientific Reports

Fig. 24

From: Co-design of a natural fiber-timber hybrid structural system using dual-robot coreless filament winding

Fig. 24The alternative text for this image may have been generated using AI.

Disassembly Process. (A) Structural components were disconnected and lifted using a spider crane, (B) Interfaces between timber and NFPC were cut, (C) NFPC mesh was removed, (D) Screws were removed, and timber struts were detached from plates, (E) Detail of interface between NFPC and timber plates after being cut, (F) Removal of the timber plates edges (G) Timber struts after disassembly, with NFPC remnants removed to enable reuse, (H) Collected NFPC mesh offcuts prepared for repurposing.

Back to article page