Correction to: Nature Communications https://doi.org/10.1038/s41467-020-16034-w, published online 8 May 2020.
The original version of this Article contained the following errors (“Original” column) and the correct terms are shown in the “Corrected” column.
Error position | Original | Corrected | |
|---|---|---|---|
1 | Fig. 1 title | Fig. 1: Crystallization of Cs3Bi2I9 perovskite single crystal (PSC). | Fig. 1: Crystallization of Cs3Bi2I9 perovskite single crystal (PSC). |
2 | Fig. 2 title | Fig. 2: Structural of Cs3Bi2I9 PSC. | Fig. 2: Structural of Cs3Bi2I9 PSC. |
3 | Fig. 3 title | Fig. 3: Optical properties and trap state density of Cs3Bi2I9 PSC | Fig. 3: Optical properties and trap state density of Cs3Bi2I9 PSC |
4 | Fig. 4 title | Fig. 4: Performance of Cs3Bi2I9 PSC photodetector. | Fig. 4: Performance of Cs3Bi2I9 PSC photodetector. |
5 | Fig. 5 title | Fig. 5: Performance of Cs3Bi2I9 PSC X-ray detector and imaging. | Fig. 5: Performance of Cs3Bi2I9 PSC X-ray detector and imaging. |
6 | Fig. 6 title | Fig. 6: Thermal stability measurement of the Cs3Bi2I9 PSC detector at 100 °C | Fig. 6: Thermal stability measurement of the Cs3Bi2I9 PSC detector at 100 °C |
7 | Fig. 3i | Currenht (nA) | Current (nA) |
8 | Fig. 4b | 300.1 mW cm-2 | 300.1 mW cm−2 |
9 | Fig. 4f | Detectivity (cm Hz–1/2w–1) | Detectivity (cm Hz1/2 W−1) |
10 | Fig. 5f | Sensitivity μC Gy-2 cm-2 | Sensitivity μC Gy−1 cm−2 |
11 | Fig. 5g | 1.63 n Gy s−1 | 1.63 µ Gy s−1 |
12 | ‘Calculation of signal-to-noise ratio’ in Methods | average photocurrent (퐼̅푝ℎ표푡표) by the average dark current (퐼̅푑푎푟푘). | average photocurrent (Iphoto) by the average dark current (Idark) |
13 | References 9 | CsPbBr3 | CsPbBr3 |
14 | References 10 | SnO2 | SnO2 |
15 | References 11 | CH3NH3PbBr3-xClx | CH3NH3PbBr3-xClx |
16 | References 20 | A3M2I9 | A3M2I9 |
17 | References 21 | Cs2AgBiBr6 | Cs2AgBiBr6 |
18 | References 22 | (NH4)3Bi2I9 | (NH4)3Bi2I9 |
19 | References 25 | C60 | C60 |
20 | References 26 | Cs3Bi2I9 | Cs3Bi2I9 |
21 | References 28 | CH3NH3PbX3 | CH3NH3PbX3 |
22 | References 32 | Cu(In,Ga)Se2 | Cu(In,Ga)Se2 |
23 | References 34 | MAPbI3 | MAPbI3 |
24 | References 35 | Cs3Bi2I9 | Cs3Bi2I9 |
25 | References 40 | Cs2AgBiBr6 | Cs2AgBiBr6 |
26 | References 43 | MAPbI3 | MAPbI3 |
27 | References 52 | Cd0.9Zn0.1Te | Cd0.9Zn0.1Te |
This has now been corrected in both the PDF and HTML versions of the Article.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhang, Y., Liu, Y., Xu, Z. et al. Publisher Correction: Nucleation-controlled growth of superior lead-free perovskite Cs3Bi2I9 single-crystals for high-performance X-ray detection. Nat Commun 11, 3007 (2020). https://doi.org/10.1038/s41467-020-16809-1
Published:
Version of record:
DOI: https://doi.org/10.1038/s41467-020-16809-1
This article is cited by
-
Preparation of bismuth-based perovskite Cs3Bi2I6Br3 single crystal for X-ray detector application
Journal of Materials Science: Materials in Electronics (2023)