Fig. 4: SAXS data for materials 3D printed using PIMS resins. | Nature Communications

Fig. 4: SAXS data for materials 3D printed using PIMS resins.

From: Nano- to macro-scale control of 3D printed materials via polymerization induced microphase separation

Fig. 4

a–c SAXS profiles and corresponding domain spacing (dSAXS) values of materials 3D printed using varied PBA-CTA wt%: a 16.5 wt% PBA-CTA; b 28.2 wt% PBA-CTA; c 43.9 wt% PBA-CTA. SAXS profiles were shifted vertically for clarity. d–f Scaled SAXS data showing comparison of peak broadness for materials 3D printed with various degree of polymerization (Xn) and PBA-CTA wt%: d 16.5 wt% PBA-CTA; e 28.2 wt% PBA-CTA; f 43.9 wt% PBA-CTA. For the data shown in d-f, the SAXS spectra were normalized based on the intensity (I*) and the position (q*) of the principal peaks.

Back to article page