Correction to: Nature Communications https://doi.org/10.1038/s41467-025-57102-3, published online 19 February 2025
In the version of the article initially published, in the third paragraph of the Introduction, “the hydroscopic perovskite materials” should have read “the hygroscopic perovskite materials”. This correction has now been made to the HTML and PDF versions of the article.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, Z., Jia, C., Wan, Z. et al. Author Correction: Boosting mechanical durability under high humidity by bioinspired multisite polymer for high-efficiency flexible perovskite solar cells. Nat Commun 17, 3448 (2026). https://doi.org/10.1038/s41467-026-72048-w
Published:
Version of record:
DOI: https://doi.org/10.1038/s41467-026-72048-w
