Table 1 Summary of SWIR OLED performance parameters for the devices investigated in this study

From: Bright short-wavelength infrared organic light-emitting devices

No.

Emitter

Eg (eV)

0–0 emission peak (nm)

0–1 emission peak (nm)

PLQY (%)a

Von (V)b

Maximum radiance (W sr−1 m−2)b

Maximum radiant exitance (mW cm−2)b

Maximum EQE (%)b

1

BTA3

1.79

720

750

22.8 ± 4.5

1.60 ± 0.05

19.6 (16.6 ± 3.8)

6.16 (5.22 ± 1.20)

0.43 (0.36 ± 0.067)

2

i-IDSe

 

807

870

 

1.27 ± 0.082

40.8 (39.0 ± 1.2)

12.7 (12.26 ± 0.38)

0.38 (0.36 ± 0.015)

3

i-IEICO-4F

1.59

810

875

5.73 ± 0.89

1.34 ± 0.073

28.5 (27.1 ± 1.7)

8.95 (8.18 ± 0.50)

0.43 (0.32 ± 0.052)

4

i-IDSe-4F

 

833

900

 

1.27 ± 0.051

40.3 (39.0 ± 1.0)

12.6 (12.24 ± 0.31)

0.46 (0.45 ± 0.011)

5

i-IDSe-4Cl

 

843

920

 

1.17 ± 0.052

44.8 (44.0 ± 0.53)

14.1 (13.81 ± 0.17)

0.54 (0.53 ± 0.012)

6

Y6

1.40

945

1,040

3.97 ± 1.07

1.07 ± 0.075

17.2 (14.2 ± 3.22)

5.4 (4.46 ± 1.01)

0.25 (0.20 ± 0.041)

7

Y11

1.37

945

1,035

8.13 ± 0.30

1.01 ± 0.035

27.3 (23.7 ± 4.78)

8.6 (7.96 ± 1.11)

0.33 (0.28 ± 0.070)

8

IDSe-Th

1.37

953

1,015

0.75 ± 0.20

1.08 ± 0.075

5.45 (4.78 ± 0.55)

1.8 (1.51 ± 0.17)

0.054 (0.047 ± 0.008)

9

IDSe-4F

1.28

1,000

1,080

1.51 ± 0.21

1.02 ± 0.076

12.2 (10.7 ± 1.58)

3.8 (3.37 ± 0.50)

0.12 (0.97 ± 0.013)

10

IDSe-4Cl

1.26

1,025

1,110

1.12 ± 0.18

0.95 ± 0.055

12.4 (10.7 ± 1.25)

3.9 (3.36 ± 0.39)

0.13 (0.10 ± 0.017)

11

Y-2W-F

 

1,035

1,140

 

1.07 ± 0.082

1.53 (1.25 ± 0.16)

0.48 (0.39 ± 0.050)

0.006 (0.005 ± 0.001)

12

SiOTIC-4F

1.24

1,050

1,120

0.26 ± 0.12

0.91 ± 0.049

2.89 (2.19 ± 0.50)

0.91 (0.69 ± 0.16)

0.031 (0.026 ± 0.007)

13

Y-2W-Th

 

1,055

 

1.08 ± 0.075

0.26 (0.24 ± 0.04)

0.08 (0.075 ± 0.012)

0.006 (0.005 ± 0.001)

14

COTIC-4F

1.17

1,125

1,200

0.38 ± 0.14

0.78 ± 0.041

2.81 (2.43 ± 0.39)

0.88 (0.75 ± 0.12)

0.031 (0.024 ± 0.006)

15

TTT-C20-4F

 

1,150

 

1.11 ± 0.075

1.84 (1.70 ± 0.16)

0.59 (0.54 ± 0.050)

0.017 (0.016 ± 0.002)

  1. aMeasured in solid films and under ambient conditions. Average values ± standard deviation were obtained from four measurements.
  2. bValues shown in parentheses are averages over fifteen devices for each emitter.