Table 4 Wear lubrication test with SAE 140 W lubricant.
From: Experimental study of lubricating wear phenomena in Ag-Mg alloy systems
S. No | Test speed (RPM) | Pin Dia (Mm) | Track radius (MM) | Normal load applied (N) | Test duration (MINS) | Sliding distance (M) | Sliding velocity (M/S) | Specific Wear Rate (MM3/NM) | Wear loss (MICRON) | Coefficient of friction (COF) |
|---|---|---|---|---|---|---|---|---|---|---|
1 | 160 | 12 | 60 | 40 | 17 | 1000 | 1 | 0.000155 | 21.3198 | 0.04 |
2 | 319 | 12 | 60 | 40 | 17 | 2000 | 2 | 0.000029 | 8.4392 | 0.04 |
3 | 478 | 12 | 60 | 40 | 17 | 3000 | 3 | 0.000005 | 2.3956 | 0.04 |
4 | 160 | 12 | 60 | 50 | 33.5 | 1000 | 1 | 0.000006 | 5.7981 | 0.04 |
5 | 319 | 12 | 60 | 50 | 25 | 2000 | 2 | 0.000007 | 7.0836 | 0.04 |
6 | 478 | 12 | 60 | 50 | 6 | 3000 | 3 | 0.000046 | 6.9612 | 0.05 |
7 | 160 | 12 | 60 | 60 | 50 | 1000 | 1 | 0.000008 | 9.0409 | 0.04 |
8 | 319 | 12 | 60 | 60 | 8.5 | 2000 | 2 | 0.000011 | 5.2545 | 0.04 |
9 | 478 | 12 | 60 | 60 | 11.5 | 3000 | 3 | 0.000006 | 2.3576 | 0.04 |
