Search

Erbium-based fiber lasers are widely used but hard to integrate on chips at an industrial scale. Here, authors demonstrate the first wafer-scale erbium-doped silicon-nitride waveguide lasers with broad C+L-band tunability, high output power, and fiber laser-class coherence.

Lithium niobate (LN) is difficult to process via dry etching. Here, authors demonstrate the fabrication of deeply etched, tightly confining, low loss LN photonic integrated circuits with losses 4 dB/m using diamond like carbon as a hard mask.

A frequency-tunable laser based on a hybrid silicon nitride and lithium niobate integrated photonic platform has a fast tuning rate and could be used for optical ranging applications.

Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wavelength tuning. They then provide an efficient FMCW LIDAR demonstration.

’Here the authors provide the demonstration of platicon comb generation in an integrated photonic chip using laser self-injection locking, They take advantage of platicons generation in normal GVD resonators, which significantly relaxes the material and geometry design restrictions

Copper-impurity-free Si₃N₄ photonic integrated circuits reduce thermal absorption and enable robust, deterministic soliton generation.

Self-injection locking of the pump laser for a soliton microcomb has significantly relaxed the requirements for laser drives. Here the authors study self-injection locking in experiment and theory and reveal that the soliton formation is feasible with detunings unreachable according to previous theories.

Thermal agitation of charge carriers, known as Johnson noise, is the dominant noise in electronic circuits. Now it has also been observed as a key noise source in integrated electro-optic photonic circuits, posing challenges for future applications.

An integrated electro-optic frequency comb that combines microwave integrated circuits with a photonic circuit based on lithium tantalate leads to broadband operation with low power requirements.

The researchers showcase a photonic-electronic FMCW LiDAR source composed of a micro-electronic based high-voltage arbitrary waveform generator, a photonic circuit-based tunable Vernier laser with piezoelectric actuators, and an erbium-doped waveguide amplifier.

Electro-optical photonic integrated circuits based on lithium tantalate perform as well as current state-of-the-art ones using lithium niobate but the material has the advantage of existing commercial uses in consumer electronics, easing the problem of scalability.

A fully hybrid integrated erbium-doped photonic integrated waveguide laser with wide tuning of 40 nm, side-mode suppression ratio of >70 dB and output power up to 17 mW is demonstrated, achieving not only footprint reduction but also the long-anticipated fibre-laser coherence.

Here, the authors find the missing link for soliton microcombs that exist at the boundary where the group velocity dispersion of light changes sign: zero-dispersion solitons. The resulting microresonator frequency comb, based in Si3N4, spans almost an octave.

By monolithically integrating piezoelectric actuators on ultralow-loss photonic circuits, soliton microcombs—a spectrum of sharp lines over a range of optical frequencies—can be modulated at high speeds with megahertz bandwidths.