Table 1 Ink and bath information
From: Up-and-down transformable embedded ink writing strategy for soft 3D architectures
Materials | Density (g/cm3) | Viscosity (Pa.s) | Note | |
|---|---|---|---|---|
Ink-1 | SE 1700 | 1.016 | 3.60 × 104 | Yield-stress ink |
Ink-2 | 6 wt% SiO2/Ecoflex 00-30 | 0.990 | 2.36 × 103 | Yield-stress ink |
UV curable ink | Acrylic resin and SE1700 (weight ratio 7:3) | 1.149 | 4.07 × 103 | Yield-stress ink |
Hydrogel ink | PF-127 hydrogel | 1.020 | 1.88 × 104 | Yield-stress ink |
Conductive ink | graphite/inorganic aluminosilicate | 1.450 | 1.35 × 106 | Yield-stress ink |
Fluorescent ink | 6 wt% SiO2/ 1 wt% fluorescent powder/Sylgard 184 | 1.010 | 3.22 × 103 | Yield-stress ink |
Bath-0 | 2 wt% Thivex/Ecoflex 00-30 | 0.977 | 1.70 × 102 | Yield-stress bath |
Bath-1 | Ecoflex 00-30 | 0.998 | 2.90 | Newtonian-like bath |
Bath-2 | Ecoflex 00-10 | 0.998 | 9.20 | Newtonian-like bath |
Bath-3 | Sylgard 184 | 0.966 | 4.18 | Newtonian-like bath |
Thermochromic support bath | 0.5 wt% Thivex/0.1 wt% thermochromic powder/Sylgard 184 | 0.982 | 1.27 ×102 | Newtonian-like bath |
