Chemical Engineering articles for United Kingdom (UK)

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 253

Article ‘Count’ for Chemical Engineering.

Journal Count Share
7 2.68
Effect of Chemical Segregation and Surface Defect Formation on the Mechanism of the Aluminum Dendrite Growth 0.25
Microdroplet Templating of Uniform Nanostructured Battery Microparticles with Scalable Membrane Emulsification 1.00
Deciphering Metastable Structure Evolution in Voltage Hysteresis of Lithium-Rich Cathodes 0.08
Unlocking Interlayer Confinement Enables All-Slope Hard Carbon with Ultrafast and Highly Reversible Sodium Storage 0.08
High Oxygen Ion Conductivity in Hexagonal Perovskite Ba7Nb4MoO20 via Epitaxy-Assisted Orienting of Two-Dimensional Diffusion Pathways 0.17
Honeycomb Organogel-Fabric for Osmotic Pressure-Driven Atmospheric Water Harvesting 0.10
3D Porous Zinc Scaffold Anodes for Enhanced Stability and Performance in Zinc-Ion Energy Storage Systems 1.00
28 7.69
Bi‐Co Based Bimetallic Catalysts for Synergistic Construction of Advanced Lithium‐Sulfur Batteries With High‐Safety and Wide Temperature Range Stability 0.11
Hygroscopic Ion-Gel Strategy Enabling Self-Assembled Polysaccharide Fibers for Sustainable PV Cooling and Water Harvesting 0.22
Ultrafast Anion Storage of a High Voltage Cathode Enabled by an Integrated Donor–Acceptor and 1D COF Nanochannel Architecture With 40 000 Cycle Durability at 60 C 0.10
3D-Printed Sulfur-Derived Polymers With Controlled Architectures for Lithium-Sulfur Batteries 1.00
Toward High-Performance Zn Anodes: A Synergistic Dual-Ion Strategy via Interfacial Orientation Optimization 0.10
Tuning Diluent‐Solvent Interactions via Optimal Diluent Fluorination for Favorable Graphite Anode Interface 0.03
Confined Ion Regulation via Synergy of Porosity and Acidity in Molecular Sieves for Lithium-Metal Batteries 0.32
Hygroscopic Core−Shell Matrices via Coaxial Multi-Material Printing for Tailored Atmospheric Water Sorption 0.13
A Printed Zinc‐Ion Microbattery with Extended Shelf Life and Durability for Energy Autonomous Sensors 1.00
Heterojunction Architecture Resolves the Stability-Performance Paradox in Reversible Protonic Ceramic Cells 0.05
Fe/FeO Nanoparticles-Decorated Porous SiOC Hierarchical Spheres Enable Robust LiF-Rich Solid Electrolyte Interphase and Ultrastable Lithium-Ion Storage 0.20
Solar Heating Enhanced Selective Recovery of Metal Ions Through Flowing Electrodes Enabled by Hybrid Carbon Nanostructures 0.17
Gradient Interlayer Promotes Highly Stable Zn Metal Anodes for High-Performance Zn-Ion Batteries 0.47
Glass‐Ceramics Surface Engineering of Lithium‐Rich Layered Oxide Cathodes Toward High Capacity and High Stability 0.17
Mn-Doped-Iron Sulfide as Long-Term Stability Anode for High-Performance Sodium-Ion Batteries at Wide Temperature and High-Rate Conditions 0.08
Collaborative Design of Light-Absorbing Shell Wrapping and Inner Thermal Conductivity Enhancing for Ca-Based Thermochemical Heat Storage Pellets 0.11
Accelerating Near-Electrode Li+ Transport via High-Electronegativity Substrates for Sustainable Fast-Charging Lithium Metal Batteries 0.07
Sulfur-Doped Vanadium Oxide for High-Performance and Stable Cathode Material of Zinc-Ion Batteries 0.11
Phosphoric Acid-in-Clay Electrolyte Boosting Polybenzimidazole Membranes for High-Performance Fuel Cells 0.05
Amide Molecules Induced Desolvated Zinc Ion Enables Stable Aqueous Batteries 0.14
Tunnel-Preinserted Guest Zinc Tailoring VO2(B) Enhances Zn2+/H+ Reversible De/intercalation Capability 0.38
Polymer‐Based Solid‐State Batteries: Anion Synergistic Effect Activates Organic Cathode with High Voltage and High Energy Density 0.10
Ion-Selective Microporous Membranes via One-Step Copolymerization Enable High-Performance Redox Flow Batteries 0.38
3D-Printed Hygroscopic Matrices Based on Granular Hydrogels for Atmospheric Water Adsorption and On-Demand Defogging 0.11
Ion‐Regulated Water Activation in Plasmonic Aerogels for Highly Efficient and Salt‐Resistive Solar Desalination 0.07
Understanding the Chemical and Electronic Properties of Sub‐Monolayer TiOsub2/sub on High Surface Area Silica for Jet Fuel Synthesis Applications 0.92
3D‐Printed Ultrahigh‐Conductivity Polymer Gel Electrodes with High Mass Loading for Thickness‐Independent Zinc‐Ion Hybrid Micro‐Supercapacitors 0.13
Breaking the Capacity Limit for WO3 Anode-Based Li-Ion Batteries Using Photo-Assisted Charging 1.00
13 2.40
Boosting Solid–Solid Conversion Kinetics via Electron-Pinned Interface Engineering for High-Energy-Density Li-S Batteries 0.08
A Kinetic‐Thermodynamic Synergy to Enhance {110} Texture for Stable Lithium Metal Anodes 0.22
Tailoring the Bulk and Interfacial Environments of Hard Carbons for High-Rate and Low-Temperature Sodium-Ion Batteries 0.14
Kilogram‐Scale Water‐Mediated Exfoliation Strategy for Defect‐Free Single‐Layer MXene Nanosheets 0.06
Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis 0.08
Engineering Stress-Potential Coupled Interface on Ultrathin Lithium Anodes Toward 450 Wh Kg−1-Level Long-Cycling Lithium Metal Batteries 0.09
Steric-Hindrance Effect Induced Fabrication of Lightweight, Bi-Functional, and Easy-to-Infiltrate Hosts for 502 Wh kg−1 Lithium-Sulfur Batteries 0.11
Design Principles for Air Tolerance in Pyridinium-Based Flow Batteries 1.00
Valence-Adaptable Ni/Co Catalysis for High-Rate Sodium–Sulfur Batteries with Wide-Temperature Operation from −20 to 50 °C 0.10
Tailor-Made Solar Desalination and Salt Harvesting from Diverse Saline Water Enabled by Multi-Material Printing 0.14
Solar‐Driven Atmospheric Water Production Through Hierarchically Ordered Porous Carbon for Self‐Sustaining Green Hydrogen Production 0.05
A Tri‐Mode Photothermal, Phase‐Change, and Radiative‐Cooling Film for All‐Day Thermoelectric Generation 0.22
Covalent Surface Modification of Hydrophobic Alkoxides on Ti3C2Tx MXene Nanosheets Toward Amphiphilic and Electrically Conductive Inks 0.10
1 0.17
Probing Chemical Functional Groups in Graphene Materials Using Thermogravimetric Analysis 0.17
19 6.01
Monitoring Redox Pathways and Performance Limitations in Lithium-Sulfur Batteries Using In Situ 7/6Li and 33S NMR Spectroscopies 0.50
Directed Evolution of an Efficient Polycarbonate Depolymerase With Exceptional Operational Stability 1.00
A Weak‐Aggregation Electrolyte Enables Lithium‐Ion Capacitors at Ultra‐Low Temperature 0.07
Influence of Positional Isomerism in Weakly Solvating Ethers on Lithium Metal Deposition 0.07
Anion Pillars Enable High Energy Density Sodium Dual-Ion Battery With Ultra-Long Cycle Life 0.03
Multi‐Scale Architecture Regulation of Hard Carbons for High‐Efficiency Sodium Storage Across Ambient and Subzero Conditions 0.11
Water-Splitting “Without Water”: Splitting of the Crystallised Water of Hydrated Salts 0.20
Programmable Microwaveable Chemistry in the Chemputer 1.00
A Theory‐Driven Moderation Strategy for Electrolyte Design Unlocks Stable Aqueous Zinc Deposition 0.85
Design of Cryogenic Electrolyte with Organic-Free Solvation Structure for Wide-Temperature Zinc Metal Batteries 0.12
Electrochemical ⍺-C─H Functionalization of Nitramines for Accessing Bifunctional Energetic Heterocycles 0.40
Unlocking High‐Performance Four‐Electron Zinc‐Iodine Batteries through Halogen Bonding Inversion and Non‐Identical‐Frequency Molecular Vibrations 0.05
Insight into how PETase Functions at the Solid-Liquid Interface and an Activity-Stability Trade-Off 0.17
Crystal Facet-Engineered Anion Regulation Enables Fast-Charging Stability in Lithium Metal Batteries 0.07
Harnessing Dual Hydrogen Bonding and iLewis/i Acid–Base Interactions for Bio‐Inspired Symmetry‐Breaking Electrolytes in Aqueous Zinc‐Ion Batteries 0.53
Nuclear Quantum Confinement Enables Robust Deuterium Bonds for Highly Reversible Aluminum Anodes 0.20
Unlocking Durable and Sustainable Zinc–Iodine Batteries via Molecularly Engineered Polyiodide Reservoirs 0.14
Regulating Interfacial Molecular Configuration to Drive Facet‐Selective Zn Metal Deposition 0.46
Interfacial H‐bond Network/Concentration Fields/Electric Fields Regulation Achieved by D‐Valine Anions Realizes the Highly Efficient Aqueous Zinc Ion Batteries 0.06
18 9.41
Pattern-aware transformer for SOC estimation in IoT-based battery management systems: Toward energy-efficient and interpretable modeling 0.07
Reduced-order multi-particle model of lithium-ion batteries capturing electrochemical heterogeneity at subzero temperatures 0.14
Adaptive estimation of battery pack state of charge with optical fibre strain measurements 1.00
Transformer-based model predictive control with anode potential awareness for online fast charging optimization of lithium-ion batteries 0.08
Finding common ground: A comparative study of city-scale shallow geothermal potential for Cambridge, UK, and Berkeley, USA 0.50
Experimental demonstration of in-situ cracked premixed swirl NH3-air flames 1.00
Internal short circuit diagnosis of lithium-ion battery packs considering incomplete charging under cell inconsistencies 0.14
Techno-economic assessments of electrolyzers for hydrogen production 0.89
Revealing trade-offs between flexibility and equity in an integrated electricity-heating system 1.00
Design and evaluation of policy schemes supporting waste-heat recovery into district heating networks 0.20
Low‑carbon coordinated operation of data centers and district heating network with heating recovery 0.60
Learning Li-ion battery health and degradation modes from data with aging-aware circuit models 1.00
A record fast ACP self-heating for lithium-ion batteries without capacity loss based on electrochemical-thermal coupling model 0.10
Economic feasibility analysis of LHTES integration with a nuclear power plant 0.40
Techno-economic feasibility of pipeline and mobile thermal energy storage for liquid desiccant transport 1.00
The potential of machine learning to predict melting response time of phase change materials in triplex-tube latent thermal energy storage systems 0.40
Environ-economic analysis of hydrogen integration in decarbonizing the UK iron and steel industry: A comparative study of progressive and disruptive technical routes 0.80
Battery intelligent temperature warning model with physically-informed attention residual networks 0.08
8 5.27
Dual-temperature photothermal tandem catalysis for CO2 conversion to olefins 0.14
Stabilizing the anodic interface for solid-state lithium metal batteries by combining a low-strain lithium/carbon anode with a polymer electrolyte 0.14
Spatially resolved operando X-ray diffraction for mapping heterogeneities in Li-ion single-layer pouch cells 0.82
Operando fluorescence lifetime imaging microscopy during Li+ intercalation into graphitic electrodes 1.00
Synergistic binary catholyte design for enhanced electrochemical performance in membraneless hybrid flow batteries 0.17
Chemical lithiation reveals the structures of conjugated tetralithium dicarboxylates 1.00
Functionalised polyaniline-based porous organic polymers for catalytic conversion of COsub2/sub into cyclic carbonates 1.00
Structure–property relationships in disodium anthracene dicarboxylate for sodium-ion storage via 3D electron diffraction 1.00
3 0.46
Density-dependent sodium-storage mechanisms in hard carbon materials 0.17
Triazine-ring protonation enables synergistic enhancement of proton conduction and membrane stability 0.17
Phosphorus-induced interfacial chemistry via electrolyte design for dense and highly stable potassium metal anodes 0.13
55 14.81
Parametric analysis and multi-objective optimization of building-integrated latent heat thermal energy storage units 0.11
Unravelling the Regulatory Role of Supercritical CO2 in CH4/O2 Combustion: Linking Reaction Pathways to Performance 0.40
Biomimetic Tree-Shaped Fins for a Phase Change Cold Storage System: Enabling Cost-Optimal Charging in Refrigerated Transport 1.00
Thermal runaway behaviour of lithium-ion batteries in branched tunnels: Influence of cathode chemistry and charge/discharge rate 0.17
Performance Investigation of SrCl2/Al2O3 Composite for Thermal Energy Storage: Numerical Modelling and Experimental Study 0.29
Co-pyrolysis of Biomass and Plastics with Biochar as Catalyst for Production of Aliphatic Hydrocarbons 0.16
Comparative Analysis of Combustion and Emissions Performance of Partially Cracked Ammonia (H2/N2/NH3) and NH3/H2 Flames in a Model Gas Turbine Combustor 0.14
Operational Insights into a Biomass Gasification with Carbon Capture as a CO2 Removal Technology 0.44
Experimental and numerical investigation of standalone PCM-based cooling for data centers 0.25
Acceleration mechanism of the thermal runaway propagation in an enclosed LIB cluster and the fire disadvantage of liquid immersion 0.13
An Improved Particle Swarm Optimization-Adaptive Square Root Unscented Kalman Filter Algorithm for Accurate State of Charge Estimation of Lithium-ion Batteries 0.17
Effect of trigger cell position on thermal runaway propagation in lithium-ion battery modules within branched tunnels 0.17
Synergistic optimization of H2 active pre-chamber jet ignition and in-cylinder mixture reactivity for large-bore NH3-H2 engines performance 0.11
Internal Short-Circuit Diagnosis for Lithium-ion Batteries Using Autoencoder with Temporal Convolutional Network and Self-attention Mechanism 0.33
In-depth understanding synergistic characteristics of heat-fluid-mass transport in packed bed with large-size hierarchically porous heat storage module: in-situ experiments and numerical simulations 0.14
Cost-Effectiveness of Reversible and Conventional Solid Oxide Electrolyzers in Electricity-Hydrogen Integrated Energy Replenishment Systems: A Case Study from China 0.20
Perforated-tube modular reactor enabling high thermal efficiency and low flow resistance in thermochemical energy storage 0.14
Light-guide PCM plate—a novel heating technology and its conceptual verification 0.13
Hydration State Measurement in Polymer Electrolyte Fuel Cells from Correlated Neutron Imaging and Single-Point Impedance 0.72
A framework integrating multi-physic and data-driven models and optimization approaches to maximize electrical efficiency and power of PEMFC 0.33
Dynamic simulation of a liquefied hydrogen export terminal 0.11
Innovating thermochemical energy storage: thermal performance enhancement of cascade reactor with rotating water spray 0.33
Improved harmonic loss – History gated unit recycling for online state of charge and state of energy co-estimation of lithium-ion batteries for large-scale energy storage stations 0.17
Regeneration performance evaluation of multi-stage drawer type solid desiccant packed bed under hot air combined with microwave conditions 0.17
Improved particle swarm - untracked particle filtering for accurate battery energy state estimation with the influence of multi-parameter varying temperature constraints in Inner Mongolia power station 0.17
Exploring waste heat recovery from applied smouldering systems 0.13
Analyzing sensitivities of kinetics, thermodynamics, and transport parameters in HMX (1,3,5,7- tetranitro-1,3,5,7-tetrazocane) combustion modeling 0.05
Design of a Modular Heat Storage for Heat Commodification: Optimal Aspect Ratio of a Laterally heated PCM Enclosure 0.10
Dynamic modeling and analysis of a direct contact membrane distillation system with heat recovery 0.20
Integration of low-temperature desalination with geothermal heating for heat-water cogeneration 0.14
Performance enhancement of thermally regenerative flow battery by a novel design coupling Venturi-effect-inducing structure with nature-inspired flow distributors 0.20
Techno-economic assessment of decarbonising bitumen storage 1.00
A novel extended Kalman filter-guided long short-term memory algorithm for power lithium-ion battery state of charge estimation at multiple temperatures 0.17
Mechanism-traced diagnosis of lithium inventory loss for lithium-ion batteries using physics-driven machine learning 0.33
A systematic investigation of thermal and electrochemical behaviour of a cylindrical lithium-ion battery during charge and discharge processes 0.14
A newly designed floating solar still with submerged external condenser: 4-E comprehensive analysis 0.13
Techno-economic assessment of a fuel flexible free piston engine generator based energy system for cold ironing application 1.00
Experimental analysis and comprehensive performance improvement research on composite phase change materials packed bed thermal storage systems 0.20
Parametric studies and design recommendations for a novel hybrid battery thermal management system with ultrathin PCM layers between liquid cooling channels and batteries 0.14
A multi-stage augmentative generalization learning prediction model for lithium-ion battery remaining useful life under uncertain working conditions 0.14
A Data-Driven Methodology for Early-Stage Estimation and Second-Life Applicability Assessment toward Lifecycle Refined Management of Power Batteries 0.29
Household and whole-system assessments of distributed heat pump deployment for domestic heat decarbonisation in the UK 1.00
Multi-criteria techno-economic and environmental optimization of PVT-assisted CO2 heat pump system for sustainable energy buildings in cold climates 0.14
Improved back-propagation neural network-multi-information gain optimization Kalman filter method for high-precision estimation of state-of-energy in lithium-ion batteries 0.14
Thermal runaway characteristics of lithium-ion batteries in a branched tunnel: Impact of longitudinal ventilation and cell state of charge 0.17
Crushing safety prediction of a battery pack system by fusion of multiple methods 0.14
Experimental study of liquid ammonia injection timing in rapeseed methyl ester dual injection engine 0.50
Equation-oriented thermodynamic optimisation of heat pump integration in industrial heat recovery systems: A system-level pathway to cost and emission reduction 0.38
Exhaustive enumeration of heat exchanger networks with minimum utility consumption using graph-theoretic approach 0.06
Steam gasification of plastic and woody biomass for hydrogen-rich syngas production with CO2 reduction, emission and energy analysis 0.63
Investigation of a novel lithium battery thermal management strategy by using thermoelectric technology 0.14
Cooling performance enhancement and economic analysis of air conditioner systems integrated with phase change materials for telecommunication base station 0.20
Enhanced quantile regression long short-term memory hybrid neural network for the state of charge point and interval estimation of lithium-ion batteries 0.17
Effects of cross wind and ullage height on the burning rate of medium-scale pool fires 0.20
Development and system performance evaluation of new thermochemical energy storage composite materials for direct photothermal conversion at low temperature 0.13
12 6.87
Replicability challenges in redox flow cell testing: insights from a multi-institutional study 0.61
Reconstructing the electrochemistry of lithium-ion batteries through operando diffuse reflectance spectroscopy 0.61
Separator-free aqueous zinc–iodine batteries: an in situ dual-confinement interface enabling electrostatic reversible polyiodide capture/release 0.08
Enhancing power density and cycle life of NMC811 battery cathodes via combined dense calendering and laser patterning 0.93
Cation-disordered rocksalt cathode for anode-free zinc-ion batteries 0.92
Investigating the effect of lithiation on polycrystalline NMC811 Li-ion battery cathode cracking using in situ SEM micromechanical testing 1.00
Direct visualization and mechanistic insights into initial lithium plating in anode-free lithium metal batteries 1.00
An enhanced three-stage model for sodium storage in hard carbons 0.17
Taming polyiodides: phenol chemistry for shuttle-free and durable zinc–iodine batteries 0.20
Amorphous anion skeletons induce rapid and cation-selective ion flux towards stable aqueous zinc–iodine batteries 0.41
Nano-carbon supported B/N-coordinated Fe single atoms with a tuned electronic structure for long lifespan zinc–iodine batteries 0.11
Identifying the role of Zn self-dissolution in the anode corrosion process in Zn-ion batteries 0.83
1 0.15
Eco-friendly Approach for the Removal and Simultaneous Detection of Cyanide Toxins from Drinking and Wastewater Sources 0.15
3 0.25
Mechanochemical biochar enables electron-transfer-mediated ferrate(VI) activation for enhanced micropollutant degradation 0.03
Broad-Spectrum Degradation of Emerging Contaminants and Industrial Dyes by a Robust CuCo(1:2)@N Catalyst Activating Peroxymonosulfate 0.17
Nanoengineered Scheelite-Structured SrWO4 Decorated on MXene Sheets: A Novel Platform for Electrochemical Sensing of the Anti-Cancer Drug Nilutamide with DFT Insights 0.05
6 0.94
Plant-Level Health Benefits from Decarbonizing the Iron and Steel Industry in China 0.07
Mechanistic Insights into Triplet Excited-State Organic Contaminants: Unrecognized Role of Chemical Probes and Scavengers in UV-Based Advanced Oxidation Processes 0.11
Benzene Ring-Driven Metal Hydrolysis and Floc Formation in Coagulation: Mechanistic Insights from Organic Structural Units 0.40
Tailoring Selectivity in Redox-Copolymers for the Electrochemical Recovery of Platinum Group Metals from Complex Feedstocks 0.10
Key Factors Controlling Remediation of Organic Pollutants in Synergistic Electric Field CaO2/Fe(II) Fenton-Like Systems 0.10
Quantitative Profiling of Elementary Reaction Steps in Sulfate Radical-Based Treatment Processes: A Two-Loop Self-Consistent Approach 0.17
1 0.13
Stable Mo isotopic fractionation during complexation onto hematite surface: Molecular insights from Ab-initio MD and X-ray absorption spectroscopy 0.13
2 0.37
Regulating Radical–Nonradical Pathways via Phosphorus-Engineered Cobalt Nanocatalysts for Fenton-Like Oxidation 0.10
Synthesis of (V0.2Cr0.8)2(Ga0.5Ge0.5)(C0.6N0.4), a Triple-Site Solid Solution MAX Phase 0.27
11 2.06
Efficient removal of ibuprofen and ketoprofen from aqueous solutions using ZIF-8: A comparative study of two synthesis technique 0.21
Environmental impact re-evaluation of coal-fired district heating systems from the marginal life cycle perspective 0.17
Hydrogen evolution behavior and morphology regulation of electrowinning of iron in acidic sulfate system 0.13
Staged pyrolysis of corn cob to improve the production of glycolaldehyde, acetic acid, and acetol 0.11
Comprehensive life cycle carbon emission estimation of coalfield spontaneous combustion using time series thermal infrared remote sensing 0.20
Prospective life cycle and techno-economic analysis of direct air capture-to-urea production under CBAM 0.25
Development of Ca-alginate/nano SiO2 PCC based on waste cooking oil derivative for foamed concrete applied to energy-saving system 0.14
Calcium and magnesium ions removal by different bacteria strains: Implications for limitation of lime-scale formation during seawater desalination 0.14
From urban waste to environmentally friendly coating-waste cooking oil derivative/polystyrene phase change coating for foamed concrete 0.14
ε-MnO2 with oxygen defect Engineering: Modulating local electron density to enhance superoxide radical generation via peroxymonosulfate activation 0.19
Trade-offs between total and peak energy consumption due to plumbing layouts in Australian and UK domestic hot water systems 0.38
10 5.34
Unsaturated ZrOx Sites Boost C–C Coupling for Selective CO2 Hydrogenation to Olefins 0.18
Controlling Electrode–Electrolyte Interactions to Enhance Capacitance 0.61
Controlled Polymerization Catalysis for the Synthesis of Degradable Amphiphilic Polycarbonates from CO2 1.00
Quantifying the Influences of Epoxide Binding in Epoxide/CO2 Ring Opening Copolymerization Catalysis 0.57
Synthesis of the Double Infinite-Layer Ni(I) Phase La3Ni2O5F via Sequential Topochemical Reactions 1.00
Sterically Stabilized (Zr,Ti)-(Al,Sn,Pb,Bi)-C MAX Phase Solid Solutions with Zn Additions and Enhanced Chemical Complexity on the A-Site 0.13
Tracking Lithium Intercalation in Battery Electrodes via Their Electrochromic Properties Using Operando Ellipsometry 0.81
Probing Dopant Size Effects on Defect Clustering and Vacancy Ordering in Lanthanide-doped Ceria 0.57
Carbon Capture from Natural Gas Flue Emissions and Air via (Bi)Carbonate Formation in a Cyclodextrin-Based Metal–Organic Framework 0.20
Tellurium-Induced Noble-Metal Reactivity in CO2 Hydrogenation Catalysts 0.29
2 2.00
(AB)n Star Block Polymers Derived from CO2: Influence of Architecture and Postpolymerization Modification 1.00
Heterodinuclear Co(III)Na(I) Catalysts for the Ring-Opening Copolymerization of Propene Oxide and Carbon Dioxide 1.00
5 0.70
Anti-Corrosion Interfacial Design for Aqueous Zn Metal Batteries with Enhanced Calendar Life 0.23
Friction-Induced Chemical Potential Wells in a Conjugated Matrix for Dendrite-Free Lithium Metal Anodes 0.14
Engineering p–d Coupling at Fe–Bi and Zn–Bi Sites for Efficient Li–S Conversion 0.10
Sulfonic Acid-Based Covalent Organic Frameworks with Efficient Zn2+ Transport and Storage for Aqueous Zinc-Ion Batteries 0.11
Stable Lithium Anodes Enabled by the Hardening and High Lisup+/sup Flux Interlayer 0.11
1 0.79
Technological pathways for cost-effective steel decarbonization 0.79
2 1.21
Understanding low-pressure CO2 insertion chemistry in epoxide–CO2 copolymerization catalysis 1.00
Magnetically induced convection enhances water electrolysis in microgravity 0.21
17 5.49
Investigating the structural evolution of lithium zirconium nitrochloride solid electrolytes for all-solid-state batteries 0.02
High-performance caffeic acid-based superhydrophilic membranes for efficient removal of microplastics-oil co-contaminants 0.10
Visualising reaction complexes in amine-based unloaded and CO-loaded carbon capture solutions 1.00
Direct oxidative carbonylation of methane to acetic acid via high-valent iron-oxo mediated water activation 0.29
Mechanistically guided residual learning for battery state monitoring throughout life 0.07
Efficient and stable catalytic hydrolysis of perfluorocarbon enabled by SO-mediated proton supply 0.07
Solar-driven direct air capture to produce sustainable aviation fuel 0.75
Prevalence of plastic waste as a household fuel in low-income communities of the Global South 0.05
Universal complexing agent enabling advanced iron-cerium redox flow batteries 0.09
Ultrastrong MXene composite fibers through static-dynamic densification for wireless electronic textiles 0.09
Early prediction of lithium-ion battery degradation with a generative pre-trained transformer 0.50
Van-der-Waals-forces-modulated graphene-P-phenyl-graphene carbon allotropes 0.77
Experimental confirmation of secondary flows within granular media 0.20
Mitigating ion flux vortex enables reversible zinc electrodeposition 0.68
Dual-gradient metal layer for practicalizing high-energy lithium batteries 0.10
Nanonet trapping for effective removal of nanoplastics by iron coagulation 0.38
Cooperative Jahn-Teller effect and engineered long-range strain in manganese oxide/graphene superlattice for aqueous zinc-ion batteries 0.33
3 2.76
Heterogeneity in public attitudes and preferences for the deployment of aquifer thermal energy storage 1.00
Production of hydrogen and carbon nanotubes from methane using a multi-pass floating catalyst chemical vapour deposition reactor with process gas recycling 0.86
High plating currents without dendrites at the interface between a lithium anode and solid electrolyte 0.91
1 1.00
Thermoelectric Conduction in General Relativity: A Causal, Stable, and Well-Posed Theory 1.00
1 0.20
Pressure-driven electronegativity inversion in alkali liquids 0.20
3 0.77
State-independent ionic conductivity 0.63
Increasing the dimensionality of transistors with hydrogels 0.09
Trace-level halogen blocks CO2 emission in Fischer-Tropsch synthesis for olefins production 0.05
3 1.42
Stable porous graphene oxide membranes enabled by confined growth of 2D MOF nanosheets for high-performance desalination 0.80
Proton-shuttling nanosheet membranes enable high-power-density protonic fuel cells 0.07
China’s petrochemical plants’ CO2 emissions and high-impact contributors for carbon-neutrality production 0.56
17 5.75
Unveiling in-pipe carbon-sulfur transformation and microbial function during urine transport for centralized management 0.13
Characterising faecal particle settling hydrodynamics to reenvision solid-liquid separation in decentralised sanitation systems 0.83
Amoeba-inspired nano-robots for trace low-molecular-weight emerging contaminant removal from water 0.30
Enhancing floc growth by oxidative and reductive modification of organic matter structure 0.20
Scalable and Sustainable Cellulose Xerogels for High-Capacity Enrichment of Per- and polyfluoroalkyl Substances 0.11
Production of hydroxyl radicals by the oxygenation of FeS and the effect on sulfide removal in sewer systems 0.42
Integration of Aerobic Riverbank Filtration and Ultrafiltration for Advanced Water Treatment and Membrane Ageing Reduction 0.08
Enhanced norfloxacin oxidation with an Fe(VI)/peroxydisulfate-quinone process: iron species-driven multi-oxidation, quinone-based regulation, and density functional theory analysis 0.14
Bio-derived phytic acid synergistic peptide decorated polyamide membrane for enhanced permeance and antimicrobial properties 0.14
Electrolytic hydrogen production from acidified wastewater effluent 0.14
Valorising desalination brine for green cement production: toward mitigating global CO2 emissions 0.80
Predicting norovirus contamination and antimicrobial resistance in coastal waters from community and hospital-derived sources 0.88
Identification, sources and accumulation behavior of priority odorants discharged to surface water from stormwater systems with illicit connections 0.14
Unveiling the Neglected Role of Alcohols and Phenolic Compounds in Photocatalysis H2O2 Generation Chemistry 0.13
Reduced Cytochrome c: Exploring Its Promoting Function in Synergistic Denitrification by Pseudomonas sp. JM-7 and Thiobacillus denitrificans 0.17
Hydraulic Efficiency and Mixing Dynamics in Surface Flow Constructed Wetlands: Influence of Design, Vegetation Phenology, and Climate Variability 1.00
Overlooked Influence of Phosphate on the Performance of a Dual Membrane Process with Coagulation Pretreatment 0.14

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.