Chemical Engineering articles for Central South University (CSU), China

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 152

Article ‘Count’ for Chemical Engineering.

Journal Count Share
7 4.88
Hard–Soft Gradient-Engineered Oxychloride Coating on Ni-Rich Cathodes for All-Solid-State Lithium Batteries 0.60
Deep Eutectic Solvent–Water Interfacial Polymerization: A Scalable Route to Tailorable Covalent Organic Framework Membranes 0.71
Electrolyte Engineering via Nucleophilic Anion Design: Lithium Pentafluoropropionate Enabling Dendrite-Free High-Performance Lithium Metal Batteries 0.73
Quantifying and Inhibiting Manganese Dissolution in Li-Rich Mn-Based Cathode Materials 0.83
Engineering MnS Cathodes via Full-Voltage H+/Zn2+ Coinsertion and Synergistic Carbon Dot Regulation for Zinc-Ion Storage 0.43
Synergistic Bulk/Interface Engineering Enables Stable 4.6 V Cycling of LiCoO2 in Quasi-Solid-State Li-Ion Batteries 0.86
Electron-Initiated Self-Growth In Situ Hydrogel Electrolyte with Gradient Protection Interface Enables Stable Zinc Metal Batteries 0.71
27 14.15
Weakly Aggregated Polymeric Network Enabling Advanced Hard Carbon for Sodium Storage 0.17
Dielectric‐Tailored Water Structure in Sepiolite‐Based Electrolyte for Stable Quasi‐Solid Zinc‑Iodine Batteries 0.17
Electrolyte-Free Cathode Design for High-Sulfur-Loading All-Solid-State Li-S Batteries 0.63
Targeting Si─O Bonds to Fortify the Solid-Electrolyte Interphase for Stable Lithium Metal Batteries 0.81
Crosslinked Sodium Alginate Binder for Mechanically Robust and Long-Life Hard Carbon Anodes in Sodium-Ion Batteries 1.00
Unlocking Li-CO2 Battery Catalytic Potential via High-Entropy Alloy-Driven Synergistic Coupling for Amorphous Pathway Stabilization 0.64
Laser-Induced-Graphene-Enabled Droplet-Based Electricity Generator for Simultaneous Harvesting of Fog and Water Kinetic Energy 0.29
Breaking the Dependence on High Chloridion Concentration: A Four-Electron Zn-I2 Batteries with Inorganic Colloid Electrolyte 0.06
Hydrogen-Bond Donor Passivation Coupled with Inductive Electronic Modulation Enables Highly Reversible Zn Anodes via Interfacial Microenvironment Engineering 1.00
Solar Heating Enhanced Selective Recovery of Metal Ions Through Flowing Electrodes Enabled by Hybrid Carbon Nanostructures 0.02
Stabilizing Perovskite Phase via A-Site Charge Density Modulation During Metal In Situ Exsolution for Robust CO2 Electrolysis 0.67
Dual‐Halide Electrode–Electrolyte Interphase for High‐Voltage Potassium‐Ion Batteries 0.11
Niobium–Tungsten Oxides for Ultralow-Temperature Lithium-Ion Batteries Operation at −60 °C 0.77
Dynamic pH Regulation and Interfacial Ion Redistribution via Molecular Buffering for Dendrite-Free Zn Metal Anodes 0.73
In Situ Nitrogen‐Rich Interphase Engineering Boosting Zn (002) Plane Texture with High Depth of Discharge for Long‐Term Zinc Metal Batteries 0.11
Electron-Donating Effect Derived Stable Homogeneous Electrode/Electrolyte Interface for Ultra-High Voltage Stable Lithium Metal Batteries 0.89
Hydrogen-Bond-Rich Supramolecular Multiblock Copolymers Facilitate Rapid Zn2+ Migration in Quasi-Solid-State Zinc-Ion Batteries 0.09
Chelation and Interfacial Engineering for Long‐Term Cycling and Self‐Healing Aqueous Zinc Batteries 0.89
Electronic Structure and Lattice Vibration Regulating Enables Highly Stable Zn Metal Anode for Zinc Ion Batteries 0.82
Weakly Solvating Molecule‐Enabled Localized High‐Concentration Electrolytes for Ultralow Temperature Batteries with High‐Nickel Cathode/Lithium‐Metal Anode 0.80
Double Anion Deep Eutectic Electrolyte with Fluoroacetonitrile Cosolvent for High Performance Lithium Metal Battery 0.91
High‐Temperature and High‐Voltage Gel Polymer Electrolytes for Lithium‐Metal Batteries: Integrating Hybrid Molecular Engineering and In Situ Polymerization Strategy 0.25
Helical Branched Gel Polymer Electrolytes for 4.6V‐Class Lithium Metal Batteries 0.08
A High-Stability Zinc Powder Anode Built on the Similarity Compatibility Principle 0.38
Physicochemical Dual‐Force‐Driven PVAC@LPSCl Composite Electrolyte Film for High‐Performance All‐Solid‐State Batteries 0.50
Hybrid Directional Radiative Cooling and Solar Heating for Efficient Water Harvesting via Interior Natural Convection 0.67
Topological Polymer Electrolyte Design with Dual Confinements for Long‐Life Quasi‐Solid‐State Lithium–Sulfur Batteries 0.71
12 5.62
Stress-Mediated Lattice Reconstruction Regenerates Spent LiFePO4 Cathodes 0.71
Bimetallic Cladding-Constructed Interfacial Microenvironment Enabled Highly Reversible Powder Anode for Zn Metal Batteries 0.64
Engineering Stress-Potential Coupled Interface on Ultrathin Lithium Anodes Toward 450 Wh Kg−1-Level Long-Cycling Lithium Metal Batteries 0.73
Aqueous Sodium Humate Binder Enabling Ultra‐Stable High‐Voltage Cathodes via Protection from Interface to Bulk 0.57
Regulation of Proton Vehicle Migration for Synergetic Interfacial Stability Enables Long‐Lasting Ah‐Level Zinc‐Ion Batteries 0.50
Tailoring Li3N-Contained Complementary Gradient Solid Electrolyte Interphase in High-Performance 3.2 V Aqueous Lithium-Ion Batteries 0.67
Adaptive Localized Ectopic Structure Enhances Regeneration of Spent Lithium‐Ion Battery Cathodes 0.50
Data-Driven Additive Discovery with HOMO-Descriptor Enables Durable Aqueous Zinc Batteries via Interfacial Kinetics Engineering 0.33
Harnessing Rapid Li+/Hδ+ Exchange within the Electric Double Layer for High Performance Li-Ion Batteries 0.06
Vacancy Functionalized MoSsub2/sub Nanolaminated Membranes for Efficient Sieving in Forward Osmosis 0.06
Revisiting the Impact of Anion Selection on Sulfur Redox Reaction Kinetics for High Sulfur Loading Lithium–Sulfur Batteries 0.06
Minimizing Solvent-Coordination in Ether Electrolytes for Lithium Metal Batteries under Extreme Operating Conditions 0.78
24 12.53
Transient Polarized Cavities Mediate an Ultrafast and Stable Graphite Anode for Potassium-Ion Batteries 0.33
Nitrile-Assisted Hybrid-Solvation Electrolyte Enables Wide-Temperature, High-Voltage, and Ultrafast-Charging Lithium-Metal Batteries 0.09
Amphiphilic Interfacial Environment Reconfiguration Unlocks Long-Life Zinc-Ion Batteries With Lean Electrolytes and Ultra-Low N/P Ratios 0.75
Entropy-Mediated Solvation Enables Interfacial Equilibrium for Stable Ah-Level Zinc Metal Batteries 0.40
Dissimilar Electrolyte Decouples Zn and MnO2 Redox Chemistry Enabling Dual-Electrode-Free Lean-Electrolyte Batteries 0.25
Engineering Ferroelectric Dipole Superstructure via Phase Transformation for Stable Zinc Anodes 0.75
Regulating Dynamic Solid Electrolyte Interfacial Evolution via α-H Methyl Substitution Carboxylate Ester Electrolytes Toward 20 Ah Wide-Temperature (−60°C∼70°C) Li-Ion Pouch Cells 0.30
Programmable Diacetylene‐Bridged Cyclotetrathiophenes With Nonplanar π‐Expanded Skeleton for Electrochemical Sodium Storage 0.31
Fluorine Sustained‐Release Gel Polymer Electrolytes for High‐Energy‐Density and Wide‐Temperature Solid‐State Lithium Batteries 0.90
All‐Cyclic‐Solvent Electrolyte Design Enables Ultra‐Low‐Temperature and Fast‐Charging Sodium‐Ion Batteries 0.13
Unlocking Full State‐of‐Charge of Polyoxometalate for High‐Energy‐Density Redox Flow Batteries via Concerted Proton‐Electron Transfer 1.00
Amphiphobic Solvent‐Mediated Relay Push‐Escape Strategy for Highly Efficient Lithium‐Metal Batteries 0.83
Molding of Li5.5PS4.5Cl1.5 Particles Based on Regulating Li+ Transport for All-Solid-State Li Metal Battery 0.11
Anchored Zn(002) Orientation with Rapid Interfacial Response Guiding High-Utilization Alloy Anode and Ah-Scale Aqueous Zinc Metal Batteries 0.67
Design of Cryogenic Electrolyte with Organic-Free Solvation Structure for Wide-Temperature Zinc Metal Batteries 0.19
Choline Iodide‐Mediated Sulfur Conversion and Zinc Plating/Stripping Chemistry in Aqueous Zn–S Batteries 0.86
Adaptive Hydration Chemistry Enables Fast and Durable Zinc‐Ion Batteries 1.00
Nuclear Quantum Confinement Enables Robust Deuterium Bonds for Highly Reversible Aluminum Anodes 0.70
Ultraselective Permeable Polyamide Membranes Prepared via Interfacial Polymerization of Alkane and Deep Eutectic Solvent 0.88
Synergistic Regulation of Multi‐Interface Chemistry by Functional Carbon Dots for High‐Performance Composite Solid Electrolytes 1.00
Enhancing Ion Transport at Primary Interparticle Boundaries of Polycrystalline Lithium‐Rich Oxide in All‐Solid‐State Batteries 0.62
Entropy‐Driven Competitive Adsorption Sites Tailoring Unlocks Efficient Hybrid Conversion Zn–Air Batteries 0.25
High‐Throughput DFT‐Assisted Design of Electrode for Efficient High‐Temperature Electrochemical Dehydrogenation 0.08
Synergy Between Weak Solvent and Solid Electrolyte Interphase Enables High‐Rate and Temperature‐Resilient Potassium Ion Batteries 0.14
1 1.00
Fault detection for lithium-ion batteries of electric vehicles with spatio-temporal autoencoder 1.00
2 1.78
Binder-free Co9S8/Ni7S6 heterostructure electrodes via one-step electrodeposition for high-performance coplanar micro-supercapacitors on paper 0.78
Interlayer current collectors optimize the surface micro-cracks of gas diffusion electrode for stable CO2 electrolysis 1.00
12 8.85
Combined “grass grid” and “reverse biomineralization” boosts the powder anode utilization of Zn–air batteries 1.00
Dielectric morphology engineering: a hydrogel electrolyte with a balanced local electric field to enhance the migration number of zinc ions 1.00
Montmorillonite nanoreactors for synergistic confinement synthesis and ion-conduction in stable sulfurized polyacrylonitrile cathodes 0.19
Facile synthesis of a self-stabilized lamellar mica membrane for efficient organic solvent nanofiltration 0.83
Advanced halide/sulfide all-solid-state lithium metal batteries with fluorinated interface layer 0.70
Stabilizing the anodic interface for solid-state lithium metal batteries by combining a low-strain lithium/carbon anode with a polymer electrolyte 0.86
One-pot synthesis of a polydopamine-glued g-C3N4/CoxFe1−xWO4 membrane for synergistic photocatalytic water purification 0.13
Interfacial pH regulation by a tetra-hydroxyl organic additive enables stable zinc anodes in aqueous batteries 0.86
A Zn@Sn powder anode for side reaction-resistant and stable aqueous zinc-ion batteries 1.00
A Si3N4-modified cellulose/glass fiber hybrid separator inhibiting zinc dendrites and cathode dissolution for aqueous zinc-ion batteries 0.80
Enhancing zinc anode stability via dual-additive electrolyte engineering 0.80
Interfacial cation engineering in δ-MnOsub2/sub nanosheets for efficient oxygen reduction reaction 0.69
7 2.57
Interlayer co-chemistry of a homologous ion stabilizer and microenvironmental molecular regulator for high-performance zinc-ion storage 0.14
Revealing transport kinetics for efficient electrochemical conversion of captured CO2 in amine solutions 0.33
Coupling abundant active sites and an ultra-short ion diffusion path: R–VO2/carbon nanotube composite microspheres boosted the performance of aqueous ammonium-ion batteries 0.17
High-yield synthesis of graphene quantum dots from spent graphite and application in hydrogel Zn batteries 1.00
Dual-functional nanoengineering via molecular pillaring and conductive hybridization for high-performance aqueous zinc-ion batteries 0.04
Volmer–Weber growth of nano-island heterostructures on spinel cathodes: a route to stable high-voltage lithium-ion batteries 0.10
A leveling–shielding dual strategy enabling stable zinc anodes to exhibit ultra-low interfacial impedance 0.80
16 7.80
Design and optimization of large-scale thermochemical heat storage reactor and its application in integrated energy system 0.08
Physical informed neural network for SOH estimation of lithium-ion battery with electrochemical mechanism 0.33
Life cycle carbon footprint and water footprint analysis of solar energy to ethylene glycol 0.25
Techno-economic and life cycle assessment of liquid biofuels obtained from municipal sewage sludge by hydrothermal liquefaction (HTL) 0.08
Design and Evaluation of Closed-loop Carbon Recycling Strategies based on Co-electrolysis for On-site Reusing CO2 in the Blast Furnace Gas 0.09
Experimental study of pre-chamber ignition with asymmetric intake valve timing for performance enhancement in a high compression ratio spark-ignition engine 0.07
A deposition–removal-informed hybrid temporal model for online fouling estimation of industrial heat exchangers under parameter variability and nonstationarity 0.75
Bidirectional Mamba network with multi-scale feature fusion and sparse-channel mixture of experts for battery state of charge estimation 0.86
State-of-health estimation for battery packs of real-world electric vehicles with cell-to-pack transfer learning 1.00
Battery SOH assessment for real-world EVs based on discharging process characteristic and ensemble learning approach 0.25
A real-time feedback and adaptive control strategy for battery thermal management system 0.17
Prediction of diesel cetane number based on physicochemical properties and hydrocarbon compositions using XGBoost model 0.70
Electromagnetically induced in situ catalytic methanol steam reforming for hydrogen production 1.00
Mechanistic insights into alkali metal migration and slagging behavior in K-type biomass ash during thermal conversion 1.00
Thermodynamic, kinetics, and physicochemical properties of carbon-containing pyrite under air roasting conditions 1.00
A multi-source domain transfer learning method based on ensemble learning model for lithium-ion batteries SOC estimation in small sample real vehicle data 0.17
4 1.32
Ligand-field regulation enables high energy-efficiency cathodes for aqueous zinc-ion batteries 0.17
Regioisomerism-guided interfacial design toward stable zinc metal anodes 0.80
Interfacial gradient engineering synergized with self-adaptive cathodic defense for durable Zn-ion batteries 0.19
Identifying the role of Zn self-dissolution in the anode corrosion process in Zn-ion batteries 0.17
4 2.79
UV/Na2S2O8 backwashing controls fouling with limited cell viability loss in anammox MBRs: performance and mechanisms 0.88
Mineral dissolution products drive anammox nitrogen removal via sludge aggregation 0.79
The ultra-large-capacity silica-supported ferric oxyhydroxide material: Preparation and mechanism on arsenic removal from water 1.00
Bio-based TEMPO-CNC reinforced Fe-doped UiO-66 with hierarchical porosity for efficient enrofloxacin removal 0.13
5 1.81
Are We Characterizing the True Peaks of Disinfection Byproducts? Establishment of a Rapid and Accurate 14/15N-HaloFormula Methodology for FT-ICR-MS 0.06
Mechanistic Insights into Triplet Excited-State Organic Contaminants: Unrecognized Role of Chemical Probes and Scavengers in UV-Based Advanced Oxidation Processes 0.36
Machine Learning-Assisted Prediction of Mercury Removal Efficiency of Carbon-Based Adsorbents 0.67
Quantitative Profiling of Elementary Reaction Steps in Sulfate Radical-Based Treatment Processes: A Two-Loop Self-Consistent Approach 0.67
Reductive Control of Refractory Contaminants in Water by Far-UVC Photolysis of Sulfite 0.05
1 0.06
K2O Encapsulation-Decomposition Mechanism: Unlocking Closed-Pore Engineering in Hard Carbon Anode for Sodium-Ion Batteries 0.06
7 5.14
Multisource data fusion framework reveals multi-scale spatiotemporal dynamics of anthropogenic CO2 emissions in China 0.38
Divergence in immobilization pathways of Pb and Zn from zinc leaching residue in ceramic tiles: Selective crystallization and solid solution mechanisms via DFT 1.00
Heavy metal removal efficiency in tailings through washing: Prediction and optimization 0.90
Aeration-assisted three-dimensional granular boron-doped diamond electrochemical system for high-efficiency organic pollutant degradation: synergistic reactive oxygen species generation and enhanced mass transfer 1.00
Preparation of battery-grade iron phosphate from iron-rich waste acid in titanium white production 1.00
Selective complexation-stepwise precipitation-roasting process for separating and preparing ZnO nanoflakes from complex zinc-containing solutions 0.17
Novel and efficient separation of zinc and magnesium: a citric acid-sodium sulfide stepwise precipitation method 0.70
5 1.92
Heteroatom-Engineered Atomic Electric Fields Activate C–F Bond for Efficient Perfluorocarbon Decomposition 0.79
Multifunctional Asymmetric Soluble Covalent Organic Frameworks: A Versatile Medium for Stabilizing Lithium Anode Interfaces 0.23
Rational Lithium Salt Selection Principle for Designing High-Entropy Electrolytes toward High-Performance Lithium Metal Batteries 0.02
Weakly Solvating Hydrated Eutectic Electrolyte for High-Performance Aluminum-Ion Batteries with Wide Temperature Range 0.44
Inner-Sphere Electron Transfer Enabling Highly Reversible Mn2+/MnO2 Conversion toward Energy-Dense Electrolytic Zinc–Manganese Batteries 0.44
5 3.92
Voltage-Responsive Rapid Defluorination of Free Anions in the Inner Helmholtz Layer for High-Performance Lithium Metal Batteries 1.00
Friction-Induced Chemical Potential Wells in a Conjugated Matrix for Dendrite-Free Lithium Metal Anodes 0.86
Multifunctional Separator Design for Regulating Zn2+ Ion Flux and Zn Stripping in Anode-Less Zn Metal Batteries 1.00
Functional Layer with Electron-Rich Domain and Hierarchical Ion Channel toward Stable Zinc Anode 0.29
Stable Lithium Anodes Enabled by the Hardening and High Lisup+/sup Flux Interlayer 0.78
1 0.03
Tailoring polymer electrolyte solvation for 600 Wh kg−1 lithium batteries 0.03
7 2.12
Lactic acid photosynthesis via C–C cross-coupling over atomically dispersed Ba 0.14
Solvation engineering decouples bulk and interfacial chemistry for robust potassium-ion batteries 0.11
Interfacial evaporation-induced localized multi-field coupling enables efficient co-recovery of freshwater and nitrates 0.63
Efficient and stable catalytic hydrolysis of perfluorocarbon enabled by SO-mediated proton supply 0.64
A scalable and long-cycle-life 600 Wh kg solid-state lithium metal pouch cell 0.05
Boosting a practical lithium carbon dioxide battery through a decoupled electrolyte 0.25
Uniaxially oriented zinc metal negative electrodes toward spontaneous dislocation-free homoepitaxy 0.30
3 2.69
Unraveling the Role of Residual Solvent in PVDF-Based Solid-State Electrolytes: Balance between Ionic Conductivity and Electrochemical Stability 0.69
Organic Ionic Plastic Crystal Composite Solid Electrolytes with Efficient Interfacial Lithium-Ion Percolation for Solid-State Lithium Metal Batteries 1.00
Nitrogen-Modulated Reaction Pathways for Densified Carbon Architectures with Enhanced Volumetric Capacity 1.00
2 0.83
Co-P-O Bridges Enabling Spin-Related Interfacial Charge Regulation for Synchronizing Redox Kinetics in Dual-Pollutant Purification 0.61
In situ generation of Cu(III) synergized with crystalline amorphous strong interfacial interaction for autocatalytic degradation of LEV 0.21

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.