Chemical Engineering articles for Shanghai Jiao Tong University (SJTU), China

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 291

Article ‘Count’ for Chemical Engineering.

Journal Count Share
6 3.35
Lithium Metal Batteries with a Bone-Inspired Solid-Sol Electrolyte Based on Natural CaF2 0.78
Unravel Electrolyte-Dependent Interphase Structures in Lithium-Sulfurized Polyacrylonitrile Batteries via Cryogenic Transmission Electron Microscopy 0.03
Dual-Platform Single-Molecule Redox-Targeting Reaction in Neutral Anthraquinone Flow Batteries 0.64
In Situ Polymerized Hybrid Nanofiber Membranes Boost High-Voltage Stability of Solid-State Lithium Metal Batteries 0.14
High Volumetric Capacity FeS2/SPAN Composite with Promoted Kinetics for Li–S Battery 0.96
Electric-Symmetric-Breaking in Cu Single-Atom Catalysts for Enhanced Acetylene Hydrochlorination 0.79
30 13.13
Narrow-Band π‑Stacked Frameworks Enabling Ecosystem-Benign Solar Desalination With Underwater Photosynthesis 0.28
Carbophilicity-Enabled No-Diluent High-Concentration Electrolytes for Stable Fast Charging of Graphite Anode 0.40
Dynamic Multistage Sorption‐Based Atmospheric Water Harvesting Device With Redistributed Water Content 0.31
In Situ Electropolymerization-Induced Interfacial Electrostatic Regulation Enables Dendrite-Free Aluminum Anodes for Ultralong-Life Rechargeable Aluminum Batteries 1.00
Macroporous Zwitterionic Hydrogel Sponge With Enhanced Kinetics by In‐Situ UV Cryogelation for Efficient Water Production 1.00
π‐Conjugation Engineering Induced Polyimide Cathode with Electrostatic Confinement for Ultra‐Stable Zinc‐Iodine Batteries 0.09
Molecule-Directed Close Packing of All Zinc Crystal Facets Enables Surface Energy Homogenization for Stable Zn Metal Anodes 0.06
Structure-Kinetic Coordination for Reconstructing Anode-Molecular Interfaces Toward Stable and Efficient Aqueous Zinc-Ion Batteries 1.00
An Oryza Sativa Leaves-Inspired Moisture Electric Generator for Self-Powered Wearable Sensing and Communication Underwater 0.69
Spinel Heterostructure Strategy with Electron Delocalization for Highly Active Fenton-Like Catalysts in Wastewater Decontamination 0.80
One-Click Flow Transition Enables MnO2 Crystal Phase Engineering for Enhanced Catalytic Oxidation of HMF to DFF 0.07
Interfacial Energy-Level Modulation Enables Electron-Ion Decoupling for Hydrogen Suppression and Highly Durable Zinc Metal Anodes 0.33
Mechanically Interlocked Solid-Solid Bicontinuous Phase Epoxy/Water-In-Salt Hydrogel Structural Electrolyte for Zinc-Lithium Hybrid Structural Batteries 1.00
Dual‐Asymmetric Janus Aerogel Enabled by Ambient Drying for Synergistic Hydrovoltaic and Solar Steam Generation 0.05
Pre‐Coverage of Side Reaction Sites Enables Quasi‐Anode‐Free Rechargeable Aqueous Zinc Batteries 0.25
A Free‐Standing, Lightweight Lithium Anode Enabling High‐Energy Solid‐State Lithium‐Metal Batteries 0.11
Antimony (Sb) Recycling from Wastewater to Supercapacitor Electrode Using Ordered Porous Amidoxime-Polyacrylonitrile: Chemical Evolution and Transformation Mechanism 0.78
Glass‐Ceramics Surface Engineering of Lithium‐Rich Layered Oxide Cathodes Toward High Capacity and High Stability 0.33
Molecular Geometry‐ Mediated Interfacial Desolvation Kinetics of Disaccharide Isomers for Dendrite‐Free Zinc Anodes 0.11
Realizing a Wide-Temperature Aluminum-Foil-Anode-Based Lithium-Ion Battery 0.04
Branched Ether‐Driven Electrolyte Engineering for Resilient Inorganic‐Polymeric Interface on Micro‐Silicon Anodes in High‐Energy Li‐Ion Batteries 0.33
Surficial Cross‐Linking Hydrogen Bonds Enabling High‐Rate and Robust Solid‐State Lithium Metal Batteries 0.08
Dendrites‐Free Zn Anode Enabled by Dense Zn Deposition and Spontaneous Texture Reconstruction on (110)‐Oriented Nanotwinned Cu 0.88
Atomically Dispersed FeOx Species Functionalized Fe2O3 Nano-Island Clusters toward Efficient Fenton-Like Catalysis 0.07
Dynamic and Hierarchical Hydrogen‐Bonding Network Enables Self‐Healing Polymer Electrolyte for Ultra‐Long Cycle Life Rechargeable Aluminum Batteries 1.00
Silane‐Modified Zn Anode Induced (100) Plane Preferential Nucleation Enables Stable Aqueous Zn Batteries 0.20
Defect‐Engineered Inert Interfaces on Iron‐Rich Clay Minerals Boost Exclusive Electron Transfer Pathway in Fenton‐Like Reactions 0.01
Air‐Stabilization Creates Non‐Crosslinked Starch Particles for High‐Performance Hard Carbon Anodes 0.83
Enhancing Compatibility of Halide with Sulfide-Electrolytes via High Oxygen Incorporation for Robust Solid-State Batteries 0.04
Regulating the Sulfur Reduction Pathways with Fe2Mo3O8/NC Electrocatalyst 1.00
21 6.99
Ultrasonic Vibration-Driven Cold Upcycling of Waste Plastics: Enabling High-Efficiency Seawater Distillation 0.27
Simultaneous Passive Water and Electricity Generation in Arid Regions via Fe3+/Li+ Cross-Linked Hygroscopic Hydrogels 0.25
Solid–Liquid Synergy Enables a Trisulfur‐Radical‐Rich Microenvironment for Accelerated Li–S Conversion Kinetics 0.18
Biomimetic Porous Carbon of Marine Sponge for High Performance Cathode of Li-S Battery 0.11
Equilibrium Lithiation Dynamics Induced Strain Partitioning Design Minimizing Volume Change of Bulk Alloy Type Anode for Lithium Ion Battery 0.07
Decoding the Electrodeposition of Zinc Anode With Dynamic Mixed Nucleation Model for Rechargeable Batteries 0.72
Embedding Fe-Based Redox Chemistry Into Low-Cost Oxyhalide Solid Electrolytes for High-Performance All-Solid-State Batteries 0.19
Constructing Ion Bridges With Competitive Coordination Effects to Promote Li+ Conduction in Solid-State Electrolytes for High-Performance Lithium Metal Batteries 0.90
Gradient-Modified Li-Rich Manganese-Based Oxides Cathodes with Breakthrough of Kinetic Limitation for High-Performance All-Solid-State Lithium Metal Batteries 0.19
Synergistic Defect Engineering in Ca-Based Pellets for Durable and High-Absorptance Solar Thermochemical Energy Storage 1.00
Close-Loop Cathode Chemistry Enables Self-Rejuvenating Aqueous Zn–Te Batteries Compromised by Non-Equilibrium Redox Pathways 0.01
4.5-V-Class Safe Lithium-Ion Batteries with Silicon-Majority-Graphite Anodes Enabled by Self-Limiting Interphase 0.33
Mechanically Assisted Li+-Conduction in Crown Ether-Covalent Organic Frameworks for Lithium Metal Batteries 0.15
Dilute Electrolyte with Vehicular Aggregates for Stable High‐Energy Lithium‐Metal Batteries 0.25
Dual-Zone Chloride Engineering to Enable Ultra-Stable Two-Electron Zinc-Iodine Batteries 0.14
Modulating Interfacial Solvent Aggregation Chemistry to Enable Low‐Temperature Sodium‐Ion Battery 0.09
Rational Design of High‐Entropy Garnet Electrolytes via Computational Screening for Stable Lithium Interfaces in All‐Solid‐State Batteries 0.29
Thermodynamically Self‐Assembly Hydration‐Cycle Crystals for Multidimensional Off‐Grid Water‐Energy Nexus 0.01
π‐Conjugated Microporous Hydrocarbon Electrodes for High‐Capacity and High‐Voltage Lithium‐Ion Capacitors 0.85
Enhanced Kinetics and Stability of Zn-MnO2 Batteries with a Multifunctional TiO2 Coating 0.92
Revealing the Underlying Role of Li2CO3 in Enhancing Performance of Oxyhalide-Based Solid-State Batteries 0.07
20 6.37
Halogen Bonding-Sustained Accumulation of Polyiodide in Hierarchically Open Micellar Film for Shuttle-Free Long-Duration Zn-I2 Battery 0.75
Li2CO3-Derived Low-Cost Li2S for Sulfide Solid Electrolytes Exceeding 11 mS cm−1 0.14
Interfacial Proton‐Coupled Electron Transfer Reverses Water Inhibition for Selective 5‐hydroxymethylfurfural Hydrogenation 0.38
An Amorphous Polyimide‐Based Positive Electrode for High‐Capacity and Durable Aluminum Dual‐Ion Batteries 0.08
Current Collector Design Principle for Long-Cycling Aqueous Zinc Batteries With Minimal Anode Usage 0.13
Functional Polymer Synthesis From CO, CO2, and Butadiene 1.00
Interlayer Covalent Reinforcement-Enabled Lattice Reprogramming for Durable Capacitive Deionization 0.03
Nucleophilic Substitution Enables Robust Fluorinated Interphase for Low N/P Ratio Zinc Battery 0.10
Electrochemical Shortcut Denitrification Coupled with Chemical Diazotization for Low‐Carbon Nitrate Wastewater Treatment 0.61
Tailoring Cathode Interphase Chemistry for High-Voltage Li-ion Batteries 0.13
Hydrogen Atom Capture Toward Dense Solid Electrolyte Interface for Long‐Cycling Aqueous Zinc‐Ion Batteries 0.57
d-p Orbital Hybridization of Ternary Transition Metal Toward High-Performance Proton Storage 0.09
Harnessing Dual Hydrogen Bonding and iLewis/i Acid–Base Interactions for Bio‐Inspired Symmetry‐Breaking Electrolytes in Aqueous Zinc‐Ion Batteries 0.07
Compact Ion‐Pair Aggregates Dominated Electrolytes Enable High‐Performance Low‐Temperature Lithium‐Ion Batteries 0.17
Regulating Solvating Sites for Stable High‐Voltage Lithium Metal Batteries 0.13
Unlocking Durable and Sustainable Zinc–Iodine Batteries via Molecularly Engineered Polyiodide Reservoirs 0.11
Co‐Regulation of Interface and Bulk for Enhanced Localized High‐Concentration Electrolytes in Stable and Practical Zinc Metal Batteries 1.00
Wide Temperature 500 Wh kg−1 Lithium Metal Pouch Cells 0.08
Ultralong-Cycling Lithium Storage of SrGe2O4S Anode Enabled by In Situ Formed Oxysulfide Matrix 0.08
Origin of Lithium Dendrite Formation in Sulfide‐Based Electrolyte 0.73
14 9.81
Superstructure optimization reveals novel cost-optimal power-to-methanol pathways using hybrid solid oxide electrolysis cells 0.11
Reduced-order multi-particle model of lithium-ion batteries capturing electrochemical heterogeneity at subzero temperatures 0.71
Multi-objective optimization and techno-economic assessment of solar-assisted medium-deep borehole seasonal thermal energy storage systems 1.00
Diagnosing inconsistencies in battery energy storage systems: A framework integrating electrical, thermal, and aging perspectives 0.61
Real-time knowledge- and data-driven reliability analysis for lithium-ion battery energy storage system by Bayesian fault propagation network 0.75
A thermo-electrical dual control strategy for SOEC system based on a neural network feedforward algorithm 1.00
Robust capacity estimation with uncertainty quantification for li-ion batteries under temporal data masking challenges: A progressive learning approach 1.00
Development and experimental validation of a PCT hysteresis model for level-of-hydrogen estimation in metal hydride hydrogen storage tanks 0.17
A concurrent estimation framework for multiple aging parameters of lithium-ion batteries for eVTOL applications 0.58
PEG-based solid-solid phase change materials for passive cooling of solar photovoltaic panels 0.17
Mechanism and analytical modeling of high-rate discharge aging in lithium-ion batteries: Emphasizing cathode current collector dissolution and particle fracture 1.00
Control-oriented thermal management strategies for large-load fluctuation PEM fuel cell systems 0.90
Research on the state-of-the-art of efficient and ultra-clean ammonia combustion: From combustion kinetics to engine applications 1.00
Inconsistency identification for Lithium-ion battery energy storage systems using deep embedded clustering 0.80
1 0.13
B-Site engineering of the nanocomposite perovskite SrCo0.5−xFeAlx O3 cathode for enhanced ORR kinetics and high-performance low-temperature ceramic fuel cells 0.13
6 1.63
Tuning ruthenium states for enhanced polyethylene hydroconversion over HZSM-5 catalysts 0.47
Synergistic effect of A-site deficiency and exsolved Fe particles in Sr1−xFeO3−δ cathodes for enhanced CO2 electroreduction in solid oxide electrolysis cells 0.50
Designing a ternary NiS2/CoS2@SnS2 nanocube as a secondary battery anode displaying excellent capacity and stability 0.08
Highly efficient electrooxidation of biomass-based furfuryl alcohol to 6-hydroxy-2,3-dihydro-6H-pyrano-3-one over Zn–Al bimetallic oxides 0.08
Electrolyte engineering enables high-energy Li‖CFx battery operation at ultralow temperatures 0.17
Boosting lithium compatibility and air stability of halide electrolytes through cyanamide substitution 0.33
2 0.75
Tailoring terminal groups in sulfonyl solvents to boost compatibility with lithium metal anodes 0.65
Dipole-mediated interfacial solvation for efficient Li-ion transport in dendrite-free Li metal batteries 0.10
60 36.24
Axial Deposition Mechanism of Corrosion-Related Unidentified Deposits on Fuel Cladding 1.00
A Climate-Driven Adsorption-Potential Optimization Framework for Sorbents Selection in Photovoltaic-Coupled Atmospheric Water Harvesting 0.43
Experimental investigation on different sorption-based refrigeration cycles with SrCl2 and PbCl2 0.75
An Integrated Radial Basis Function Neural Network and Electrochemical Modeling Framework for Proton Exchange Membrane Fuel Cells 0.27
Oriented gradient design of fluid-coupled graphite-based phase change composites for rapid and uniform latent heat storage 1.00
Theoretical analysis of a low dew point desiccant dehumidification system with temperature and pressure swing adsorption 1.00
Comparative Analysis of Combustion and Emissions Performance of Partially Cracked Ammonia (H2/N2/NH3) and NH3/H2 Flames in a Model Gas Turbine Combustor 0.57
Experimental investigation of a vehicle-scale immersion cooling battery thermal management system for high-energy-density battery packs under cooling and heating conditions 1.00
Machine-learning based multi-field reconstruction and performance assessment of alkaline water electrolyzers 0.67
Systematic screening of numerous salt hydrates for passive adsorptive PV cooling/water harvesting system 0.17
Dual role of silicon in potassium-induced ash deposition: Low-Temperature mitigation and high-temperature aggravation mechanisms 0.30
Study on the formation mechanism and pressure oscillation characteristic of condensation-induced water hammer in the residual heat removal system under ocean heaving motion 0.34
Numerical investigation on the heat transfer characteristics and dynamic adaptability of cascaded phase change material (PCM) heat sinks under flight conditions 0.50
Design and optimization of large-scale thermochemical heat storage reactor and its application in integrated energy system 0.75
Highly efficient solid desiccant heat pump based on dual cooling sources enabled by super hygroscopic polymer 1.00
Effects of biodiesel saturation on combustion and emission characteristics in an ammonia/biodiesel dual-fuel engine 0.17
Comparative analysis of condensation characteristics in diesel and liquid ammonia sprays under high-pressure direct injection conditions 0.93
Effect of low pressure on thermal runaway behavior of lithium-ion batteries induced by internal short circuit with optical diagnostics 0.80
Macro-Coating and Micro-Impregnation Enabled Hydrated Salt Composites for Battery Thermal Safety Systems 0.25
Multi-stage MOF desiccant wheel for stepwise dehumidification and low temperature regeneration 1.00
Flash boiling spray comparison at fixed superheat index: independent control of fuel temperature and ambient pressure 0.29
On the liquid layer formation and thermodynamic behavior of liquid oxygen during interface reorientation: A combined drop tower experiment and simulation study 0.60
Hybrid end-to-end battery modeling and SOH estimation via physics-data fusion and maximum mean discrepancy minimization 1.00
Data-augmented SOH estimation for lithium-ion batteries under small-sample conditions: A hybrid STL-transformer-TimesNet approach 0.29
Towards reliable and interpretable NOx emission prediction: A knowledge and data driven model for coal-fired boilers with spatiotemporal feature integration 1.00
Study on the reaction mechanism of nitrogen migration in pressurized oxy-fuel combustion 0.83
Synergistic integration of Kolmogorov-Arnold networks with RNN for enhanced lithium-ion battery state-of-health estimation with optimized feature extraction 0.01
Towards High-Efficiency and Clean Ammonia/Diesel Dual-Fuel Direct Injection Engines via Intelligent Charge Compression Ignition (ICCI) Mode 0.83
Performances of eutectic phase change composites containing CNTs/GO/PVA oriented aerogels coated with EP/CNTs/CFR for Li-ion batteries thermal management in wide temperature range 0.14
Exergy and entransy analyses of H2O/LiBr absorption heat storage with different heat exchange modes 1.00
Combustion Machine Learning of Superheated Butanol Atomization in Optical GDI Engine 0.25
Study on the flame structure and combustion dynamics of ammonia swirl flame assisted by gliding arc plasma 0.06
Numerical optimization and experimental study of a biomass pellet stove 0.10
Dynamic transportation model for cost targeting and integrated design of process and heat exchanger network 0.08
High-pressure ammonia spray combustion in lean premixed hydrogen mixture 0.90
A solar-driven device based on hydrogel composite sorbent for efficient atmospheric water harvesting in arid regions 0.20
Revealing the mechanisms of ammonia dual-fuel combustion for decarbonization in marine transportation 0.33
Design and experimental implementation of LPV-based adaptive model predictive control for air-cooled fuel cell 0.17
Experimental investigation on heat transfer characteristics in the LNG intermediate fluid vaporizer 1.00
Multi-objective Optimization of a Cascade System for 136Xe Enrichment via Microchannel Distillation 1.00
Recondensation behavior modeling in a liquid methane-oxygen common bulkhead tank by a modified level set method 0.50
Numerical investigation and comparative analysis on heat transfer characteristics of organic phase change materials (OPCMs) and liquid metals (LMs) under flight acceleration conditions 0.43
Frequency transition in thermoacoustic oscillations of a lean premixed swirl burner 1.00
Fuel Octane Number Measurement Method based on High-Frequency Combustion Pressure and Its Application to Fuel Octane over 100 0.86
SOH estimation method for lithium-ion battery packs under real-world operating conditions based on a new attenuated model without additional experiments 0.56
Performance of cascaded packed bed thermal energy storage with size-gradient phase change material capsules 1.00
A high-efficiency immersion cooling system with integrated flow distribution plates for vehicle-scale high-energy-density battery modules 0.94
Experimental study on a direct steam generation unit of high temperature air source heat pump 0.44
Dynamic evolution of melting particle deposition and overall cooling effectiveness on a film-cooled flat plate 1.00
Effect of bed material on agglomeration of bed particles in CFB burning pellets from Arundo Donax 0.25
The selective removal of HCN by Fe2O3 in reforming of syngas from wet sludge pyrolysis 0.17
Microwave-Assisted Catalytic Pyrolysis of Polyethylene for Hydrogen Production: Mechanistic Investigation by ReaxFF MD Simulation and Experiment Validation 0.67
Multidimensional signal evolution during nail-penetration-induced thermal runaway in lithium-ion batteries with different states of charge: An optical investigation 1.00
Effects of injection parameters on the combustion characteristics of ammonia-diesel dual-fuel direct-injection (ADDI) mode and combustion enhancement at high ammonia energy ratio 1.00
Investigation of a novel lithium battery thermal management strategy by using thermoelectric technology 0.14
Switchable multicyclic adsorption-based atmospheric water harvesting with solar and radiative sky cooling thermal concentration and heat pumps 0.50
A novel gas turbine performance prediction model incorporating the residual connection and feature engineering methods 0.80
Lithium-ion Battery State-of-Health Estimation Based on TVFEMD and BiLSTM-Attention 0.02
Robust and Optimal Control of Free Piston Linear Generator by Variable Piston Trajectory Tracking throughout Entire Operating Process 1.00
Numerical and experimental analysis of thermodynamic properties of plate heat exchangers at high Reynolds number based on different single-phase fluid structures 1.00
6 1.48
A stable 15-Ah anode-free Li pouch cell enabled by the electron resonance effect 0.10
Surfactant-mediated mesoscopic confinement and selective interfacial shielding for highly stable zinc anode 0.22
Electrolyte engineering enables rapid and durable Zn–air self-charging batteries 1.00
π-hole driven defluorination for fast kinetics of Li/CFx batteries 0.08
A sustained-release strategy of fluorinated solvents enables highly safe lithium metal batteries 0.01
Tailored glycol-functionalized mixed-conductive polythiophene coatings enable stable zinc anodes 0.07
2 0.09
Emission characteristics and formation mechanisms of ammonia and amines during residential solid fuel combustion at varying temperatures 0.01
Unraveling the dynamics and growth potential of non-tuberculous mycobacteria along water transportation in chloraminated secondary water supply systems 0.07
11 2.06
Mechanistic Insights into Fe–C Coupling Enhancing Nitrogen Removal in Salt Marsh Wetlands: Performance and electrochemical-microbial mechanism modulated by salinity and carbon materials 0.67
L-Cysteine boosts Fe2+/Fe3+ cycling in Fe-doped cellulose-derived hydrothermal carbonation carbon for enhanced peroxydisulfate activation and diclofenac degradation 0.04
Ellagic acid-based iron coordination nanoclusters with delocalized electron transfer for efficient ofloxacin degradation via peroxydisulfate activation 0.05
Magnetic Properties Driving Nitrogen Removal Improvement in Magnetite-Enhanced Activated Sludge: Mechanistic Insights and Process Validation 0.07
MIL-88A(Fe) fine-tuned nanocellulose polyvinylidene fluoride membrane for enhanced antifouling capacity via coordination 0.04
Removal of tetracyclines and estrogens with simultaneous ammonia retention in swine wastewater by aerobic treatment under short sludge retention time 0.01
Investigation of performance and antifouling mechanisms of calcium borate-modified PVDF membranes: Insights from the Dual-mechanism fouling model and XDLVO theory 0.02
Insight into nano-confined Fenton-like oxidation based on magnetic graphite oxide catalytic membrane 0.01
Prussian blue analog-derived Fe-Mn oxides for the enhanced activation of persulfate in sulfadiazine degradation: radical generation mechanism and electron transfer 0.14
Mitigation of waste sulfur acid in lead smelting: Substance flow analysis of a case study in China 1.00
Harnessing metabolic pathway modulation and multiple endogenous driving forces for sustainable nitrogen removal from high-ammonia extremely low C/N ratio wastewater 0.02
20 4.31
Site-Decoupled Electrocatalysis with Adaptive *OH Supply for Selective Polyethylene Terephthalate Upcycling 0.07
Quantifying the Contribution of Cryptic Sulfide-Driven Autotrophic Denitrification to N2O Production in a Seasonally Hypoxic River-Reservoir System 0.08
Efficient Electrochemical Tap Water Softening via Lorentz-Driven Bidirectional Mass Transfer 0.07
Unexpected Polymerization Pathway in the Carbocatalysts/Permanganate Processes for Water Decontamination 0.07
Reaction of the Peroxyacetyl Radical with Dissolved Organic Matter: Kinetics, Mechanism, and Impacts on Contaminant Degradation 0.01
Oxygen-Dependent Cascade Defluorination of GenX via Synergistic Mechanism of Singlet Oxygen and Nitrogen Oxide Radicals in Fe3+/Fe2+ Redox Cycling 0.08
<atl>Reaction Pathway Tuning between Electron Transfer-Mediated Degradation and Polymerization in Fe-MoS sub2/sub -Based Persulfate Activation System</atl> 0.06
Blood Trihalomethane Concentrations and Blood Pressure during and after Pregnancy: A Cohort Study in China 0.46
Synergizing Surface-Bound Radicals with Singlet Oxygen to Expedite Emerging Organic Contaminant Degradation in Soil-Based Heterogeneous Surface Oxidation 0.02
Synergistic Piezoelectric-Nanoscale Zero-Valent Iron Catalyst for Peroxyacetic Acid Activation: A Self-Driven Advanced Oxidation Process 0.11
Fully Amorphous Cerium/Carbon-Doped Manganese Oxides with Tailor-Made Pore and Electronic Properties for Superior Catalytic Ozone Decomposition 0.01
Identification, Formation, and Toxicity of Haloimidazoles as Emerging Nitrogenous Aromatic Disinfection Byproducts in Drinking Water 0.05
Sustainable Electro-Fenton Antifouling Strategy Simultaneously Improves Nitrogen-Removal Efficiency of Anammox in Membrane Bioreactors 0.04
Efficient Polymerization Removal of Phenolic Pollutants by In Situ-Formed Iron-Complexes in Thermally Activated Peroxydisulfate Systems 0.83
In-Situ Formed Zr-Phosphonate Surface Complex Promotes Peroxymonosulfate Activation of Single-Atom Cu for Efficient Phosphonate Oxidation 0.43
Stabilizing Ru-Based Catalysts against Bromine Poisoning through Ru–O Covalency Regulation for Durable Brominated Volatile Organic Compound Oxidation 0.91
Highly Energy-Efficient 3D-Printed Solar Evaporator with Integrated Salt Self-Collection for Zero Liquid Discharge Desalination 0.05
Direct Quantification of Ion Partitioning and Diffusion Resistances in Reverse Osmosis Membranes via Electrochemical Impedance Spectroscopy 0.06
Boosting the Photothermal Oxidation of Multicomponent VOCs in Humid Conditions: Synergistic Mechanism of Mn and K in Different Oxygen Activation Pathways 0.11
Regulation of Surface Terminal Hydroxyl Coverage of FeOCl Catalyst via Crystal Facet Protection for Enhanced H2O2 Activation 0.78
12 2.90
Release and reprecipitation of phosphorus during peroxymonosulfate-based sludge disintegration 0.01
Supercooled sodium acetate trihydrate-erythritol eutectic phase change composites for all-weather photovoltaic thermal management 0.74
Unravelling phosphorus mobilisation from sludge incineration ash: Organic-iron-phosphate complexation and aqueous speciation 0.02
Effects of biochemical component interactions on molecular transformations in bio-oil during microwave-assisted pyrolysis of protein-rich biomass 0.01
Effect of palladium loading on catalytic performance and product selectivity during diclofenac degradation by Pd0@anaerobic activated sludge 0.05
Air-source high-temperature heat pump systems for zero-carbon parks: Performance and application 0.33
On-demand thermal regulation and water harvesting via liquid metal-infused bio-inspired microchannel architectures 0.14
Interpretable-generative machine learning approaches for predicting simultaneous removal of organic pollutants and heavy metals from water by adsorbent materials 0.00
Sequential oxidation-reduction process for active chlorine distribution regulation on ammonia oxidation in the flow-through electrode system 0.00
Treating waste with waste: 1 h deep-drying of sewage sludge by secondary aluminum ash 0.01
Nitrous oxide emissions induced by antibiotics during denitrification: the mediating role of carbon source on energy metabolism and electron transport chain 0.71
Evaluating iron scraps for improved sulfur autotrophic denitrification and phosphorus removal in subsurface flow constructed wetlands 0.86
9 4.56
Mechanical Bond–Mediated Metal–Organic Polyhedra Elastomer 0.85
Multifunctional Chloride-Oxide Additive Enabling Simultaneous Ionic/Electronic Conduction for High-Rate All-Solid-State NCM Cathodes 0.13
Synergistic Barium–Oxygen Vacancy Catalysis Engineered with MWW Zeolites for Efficient PET Glycolytic Depolymerization 0.09
A Transformative Molecular Muscle Solid Electrolyte 1.00
Three-Dimensional Operando Photoacoustic Microscopy Reveals Hidden Patterns in the Complex Electrochemical Plating Process of Lithium Metal 0.97
Integrated Solvation Chemistry Enables High Energy Li Metal Batteries 0.23
High-Efficiency Hydrocracking of Polyolefin Plastics by Controlling Intimacy between Pt Clusters and Zeolite Acid Sites 0.14
Surface FeIV═O Induced Highly Selective Phenol Polymerization via Proton-Coupled Electron Transfer 0.50
Biomimetic Sandwich-Structured Tubular Ion Pump Arrays for Lithium Metal Batteries 0.67
1 0.19
Understanding the Impact of Grafted Chain Length in Polymer Electrolytes with Nonlinear Architectures 0.19
5 2.13
3D Nanotubular Nanoporous N‑Doped Graphene with Curvature-Induced Zincophilicity for Ultrafast and Dendrite-Free Zn Deposition 0.33
Elucidating High-Potential Degradation Mechanisms in Proton Exchange Membrane Fuel Cells 1.00
In Situ Reconstructed CuPS3-Derived Phosphorus Hybrid Anode for Ultrafast and Durable Sodium/Lithium Storage 0.50
Achieving 766.5 Wh kgsup–1/sup Electrode-Level Energy Density via Solid-State Cathode Integrating Ultrahigh Nickel Oxide and Lithium Iron Chloride 0.18
Designing 3D Nanoporous Cu/Cu2O (Bi) with Bimodal Porosity as a High-Rate and Capacity Zinc Anode Host 0.13
1 0.08
Unravelling gas evolution mechanisms in battery electrode materials 0.08
19 4.63
High-throughput production of microbatteries by a stack-punching method 0.71
Hygroscopic wood sponge with dual phase change function for enhanced all-weather atmospheric water harvesting 0.14
Selective carbonate radicals generation via hydraulically driven piezo-catalysis for polymerization-based removal of phenolic pollutants 0.01
Investigating the structural evolution of lithium zirconium nitrochloride solid electrolytes for all-solid-state batteries 0.07
Selective solar wax refining with nanoscale zero-valent iron 0.21
Solvation sheath reorganization enables fast ion transfer kinetics in lithium-ion battery 0.06
Regenerating end-of-life membranes for enhanced sustainability and unexpected performance 0.06
Synergistic sulfur-chlorine battery chemistry towards efficient energy storage 0.79
Synergistic MOF-based composite enabling significant solar-to-water generation enhancement in climate-resilient AWH 0.58
Real-time artificial intelligence for solid-state lithium metal batteries 0.08
Ultra-rapid preparation of large-area high-crystallinity covalent organic framework membranes 0.10
Conductive binary Li borate glass coating for improved Ni-rich positive electrode in sulfide-based all-solid-state Li batteries 0.77
Decoding single-crystal lithium growth through solid electrolyte interphase omics 0.19
Insights into free radical and non-radical routes regulation for water cleanup 0.01
Anchored atomic Ru-O architecture enables ultra-effective Fe(VI) activation via avoiding Fe(VI) self-decay for water purification 0.20
Pathways and selectivity of Fenton degradation of different precursor species of dissolved organic matter 0.04
Enhanced specific energy in fast-charging lithium-ion batteries negative electrodes via Ti-O covalency-mediated low potential 0.52
Amphiphilic nanowire-assisted monomer shuttling enables ultra-selective reverse osmosis membranes for water purification 0.05
Thermoresponsive ether-based electrolyte for wide temperature operating lithium metal batteries 0.03
1 0.07
Unified affinity paradigm for the rational design of high-efficiency lithium metal electrolytes 0.07
1 0.85
Molecular engineering of two-dimensional polyamide interphase layers for anode-free lithium metal batteries 0.85
2 0.77
3D-printed multiscale-ordered hierarchical frameworks for rapid atmospheric water harvesting 0.69
Spatially coupled adsorption and catalysis for sustainable lithium–sulfur batteries 0.08
1 0.25
Liquid-state dipolarcaloric refrigeration cycle with nitrate-based salts 0.25
3 1.58
A persistent-range hydrogen-bonded gel polymer electrolyte enabling wide-temperature and recyclable lithium metal batteries 0.90
High-quality hydrogen peroxide production through electrochemical reduction of anthraquinone in ambient environment 0.64
Deciphering co-ion and counterion transport in polyamide desalination membranes reveals ion selectivity mechanisms 0.04
1 0.20
Thermal Tuning of Brønsted Acidic Phosphorated Carbon Catalyst Coupled with Deep Eutectic Solvent Fractionation Boosts Heterogeneous Catalysis of Biomass toward Levoglucosenone 0.20
36 5.16
Near-Complete Phosphorus Valorization from Sewage Sludge: Cost-Effective Co-Production of Vivianite and Bioavailable Detoxified Hydrochar via a Recyclable Citric Acid-Mediated Hydrothermal Process 0.27
Microbial-Driven Molecular Transformation of Dissolved Organic Matter in Water-Jet Loom Wastewater Reclamation: An Integrated FT-ICR MS and Metagenomic Investigation 0.07
Full-Process Monitoring Indispensability for Two-Stage PN/A Effluent Prediction: Interpretable Machine Learning from Four-Year Full-Scale Data 0.07
Novel Self-driven Directed Alkalization Capacitive Deionization for Effective Removal of Amphoteric Boron 0.77
Role of oxygenation reactions in chlorinated disinfection byproduct formation during vacuum UV/chlorine treatment of reclaimed water 0.21
Microbial physiological responses to dense aggregates formation on micron-sized porous carrier: Roles of electron transfer and quorum sensing in enhanced nitrogen removal from high-ammonia wastewater 0.05
Selective Separation of Naphthalene Sulfonic Acids and Salts from Wastewater by Electric Field-Assisted Nanofiltration Membranes 0.07
Tailoring COFs for highly selective generation of singlet oxygen to boost antibiotic removal: Spatial regulation of PMS and photogenerated carriers 0.01
Making waves: Re-envisioning adsorption modeling at a crossroads for embracing advanced adsorbents in next-generation water treatment 0.50
Betaine-Modified La-doped Ferrihydrite for Efficient Phosphate Removal to Ultralow Levels 0.40
Synergy of Super-Liquid-Repellency and Nanoscale Sieving in a Sandwich-Architectured Janus Membrane for Stable Membrane Distillation of Hypersaline Wastewater 0.01
Enhanced Modeling of Chlorine-Organic Reaction Kinetics to Assess the Fate of Environmental Chemicals in Disinfection Process 0.07
Surface Charge Modulated Hydrogel for Faster Atmospheric Water Harvesting 0.10
Freezing-modulated cycle of manganese species for enhanced non-radical oxidation of micropollutants in the peracetic acid/Mn(IV) system 0.03
In situ Catalytic Ozonation Driven by Ferrous Hydroxyl Complex Decomplexation for Simultaneous Removal of Heavy Metals and Organics 0.02
Exploring N-nitrosodimethylamine formation induced from water flocculants by isotope tracking and spectral analysis 0.01
Limited organics shaped microbial mutualism for enhanced nitrate and Cr(VI) co-reduction in a sulfur-driven biosystem 0.04
Optimizing O3-UV process for wastewater advanced treatment with a novel mini-fluidic experimental system to minimize energy consumption: Chemical oxidation vs. advanced oxidation 0.25
An Efficient Strategy to Separate Nanoplastics from Water Using Anisotropic Magnetic Janus Particles 0.03
Promote Heterogeneous Nucleation of Struvite in Livestock Wastewater by Regulating the Surface Properties of Suspended Particles with ultrasound-assisted pretreatment 0.50
Elucidating disinfection byproducts formation during UV/dichloroisocyanurate treatment of dissolved organic matter 0.13
Selective Elimination of Aniline Contaminants Induced by Semiquinone Radicals during Peracetic Acid Oxidation of Dihydroxybenzenes 0.05
Peroxymonosulfate activation via non-contact electron transfer process (NCETP) for efficient organic pollutant removal 0.01
Impact of water matrices on micropollutant oxidation by Far-UVC/peracetic acid versus UV254/peracetic acid processes: Kinetics modeling and mechanism 0.03
Efficient and selective phosphate removal via scalable alkanolamine modified La-clay: Insights into protonation gradients at the inner Helmholtz plane 1.00
Copper-enhanced ferrihydrite Fenton generates dual oxidants for pollutant degradation via surface affinity differentiated pathways 0.00
Storm-driven overflow disinfection highlights toxicity risk of chlorophenylacetonitriles: Unveiling indole in sewer sediments as a key precursor 0.04
Predictive modeling of membrane lifetime for sustainable management of full-scale membrane bioreactors 0.07
Micro-granular sludge driven by powder carrier in membrane bioreactor: highly-efficient N amp; P removal and membrane fouling alleviation 0.02
Metal-organic framework material-derived Fe-Si micro-nuclei drive a robust anammox process via multiple pathways: “Shelter” provision, “barrier” reinforcement, and biological “inducer” modulation 0.02
Bacterial inactivation by dichloride radical in water: Molecular-level reaction kinetics and disinfection mechanism 0.14
Insights to photo-excitated H2O2 activation in heterogeneous aerogel with asymmetric defect-engineering for PPCPs mineralization 0.05
Knowledge Discovery and Performance-Energy Optimization in Heterogeneous Catalytic Ozonation via Adaptive Multi-Task Learning 0.01
Identification, sources and accumulation behavior of priority odorants discharged to surface water from stormwater systems with illicit connections 0.03
Enhancing selectivity of nanofiltration membranes for mineral ions and per- and polyfluoroalkyl substances via dual-component-assisted interfacial polymerization 0.05
In situ electrocatalytic nitrate-to-nitrite conversion-driven anammox in MBRs for extremely efficient ammonium-containing wastewater treatment 0.04

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.