Environmental Engineering articles

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 487

Article ‘Count’ for Environmental Engineering.

Journal Count
11
Effect of Impurities on Direct Recycling of Spent LiNixCoyMnzO2 Cathode Material for Lithium-Ion Batteries
Defect-Accelerated Direct Regeneration of Spent LiFePO4 via a Mechanochemical Route with Short-Term Annealing
Effects of Surface Contaminants Inherited from Lithium Sources on the Electrochemical Performance of High-Nickel Positive Electrodes
Spent Battery-to-Catalyst: Asymmetric Mn–O Motifs Boost Oxygen Activation for Upgrading Polystyrene to Aromatic Oxygenates
Green Upcycling Strategy for Spent Lithium-Ion Batteries: One-Step Coupling of Fluoridation Inhibition and Lattice Stabilization
Unveiling Swift Heavy Ion Track Morphology in Sr-Based High-Entropy Perovskites
Adsorption-Mediated Interfacial Engineering for Direct Regeneration of Spent LiFePO4 Cathodes
In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes
Transforming Retired LiFePO4 Material toward High-Performance Cathodes for Sodium-Ion Batteries via Intermediate Phase-Guided Reconstruction
Rapid Selective Recycling of Spent LiFePO4 Cathodes via a Deep Eutectic Solvent-Assisted Carbothermal Shock Method
Structure-Selective Regeneration of Heterogeneously Degraded LiFePO4 via Spontaneous Lithiation and Defect Reconstruction
16
Selective Interfacial Repair Enables Low-Energy Regeneration of Spent LiFePO4 to High-Performance Cathode
Dual-Salt Carbothermal Shock Strategy Enabling Ultrafast and Sustainable Regeneration of Spent LiFePO4 Cathode Materials
Coordination Chemistry‐Driven One‐Step Selective Leaching‐Precipitation Strategy With Concomitant Fluorine Doping for Closed‐Loop Spent Cathode Regeneration
Upcycling Waste Polyethylene Into Ultra-High Thermal Conductivity Composites Through Interface Engineering and Shear-Induced Orientation
Balancing Leaching and Relithiation in Deep Eutectic Solvents for Sustainable LiFePO4 Regeneration
Recycling Spent LiFePO4 Batteries for Fabricating LiI·3H2O and Li2CO3 via Iodine Targeted and Mild Redox
Stabilizing Spent LiCoO2 Through Interface Construction: A Sustainable Route to High-Performance Cathode Regeneration
Targeted Etching of Heterogeneous Phases and Crystal-Induced Regrowth for Direct Single-Crystal Regeneration of Spent Cathode Materials
Upcycling of Disposable Face Masks into Water‐Resistant and Flame Retardant Foams
Revealing the Atomic-Scale Evolution of Ni-Ions and NiO6 Octahedrons for Regenerating Spent Ni-Rich Cathodes
The Alchemy of Two Degraded Cathodes: Synergistic Surface-Bulk Upcycling for Degraded NCM Materials by Leached LiFePO4
Au Single-Atom Anchored TiO2 Nanotube Array Membrane for Photoelectrocatalytic Accurate Removal of Mercaptan Contaminants Under Continuous-Flow Conditions
Sustainable Revival of Spent Ni‐Rich Cathodes: High‐Temperature Endurance and Accelerated Kinetics via Strategic Upcycling
Single‐Step Electrochemical Battery Recycling
A Sustainable Biotechnology Approach for Mineral Separation
Regulated Li+/H+ Co-Insertion of Upcycled LiMn2O4 Cathode with Li/Mn Disorder for High-Voltage Aqueous Zn-Based Batteries
14
All-Dry and Scalable Direct Recycling of Spent Ternary Black Mass Toward Long-Life Ah‑Level Pouch Cell
Efficient Direct Recycling Strategy of Spent LiFePO4 Cathodes by Structural Defect Repair and Interface Construction
Regeneration of Single‐Crystal with Repaired of the (003) Crystal Plane from Degraded Polycrystalline Ternary Cathode
Efficient Non-Invasive Rejuvenation of Spent Lithium Iron Phosphate Batteries Through Controlled Overdischarge
Engineering Heteroatomic Nanotraps in Vinyl-Benzazole COFs: Record Capacity and 99% Selectivity for Photocatalytic Gold Recovery From E-Waste
Upcycling Mixed Alloy Scraps via Liquid Metal Dealloying for Cross-Alloy Circular Economy
Effective Ionic Potential Guided Dual-Gradient Structural Engineering for Spent LiCoO2 Upcycling
Plasma-Assisted Sustainable Recovery of Critical Minerals from Li-Ion Battery Waste
Direct Construction of a LiF-Rich Interphase for Sustainable Regeneration of Spent Graphite Electrodes via In Situ Decarbonization-Fluorination Strategy
Largely Enhanced Photocatalysis Process by Contact‐Electro‐Catalysis for Efficient and Eco‐Friendly Recovery of Gold
Holistic Recovery of Spent Lithium-Ion Batteries by Flash Joule Heating
Integrating High-Efficient Delamination and Structural Reconstruction Boosting Direct Regeneration of Spent Cathode Materials
Chloroaluminate Molten Salts for Low‐Temperature Electrochemical Recycling of Layered Metal Oxide Cathodes
Unraveling and Modulating the Competitive Dynamics in Direct Regeneration of Ni‐Rich Cathode Material
1
High-Resolution Mass Spectrometry for Nitrate Aerosol Isotopologue Quantification: Method Development, Calibration, and Application to Atmospheric Samples
21
Water Radiolysis Enables CO2-Activated Radical Recycling of Spent Lithium-Ion Cathodes
Surface Spin-State Manipulation via a Strong Electronegative Ligand Field Enables Direct Regeneration of Spent Lithium-Ion Battery Cathodes
Constructing Robust Cl‐Bridge for Ultrafast Leaching of Spent Cathodes in 180 s
Porous Phenazine‐bridged Tetraoxa[8]Circulenes for Selective Gold Recovery and Heterogeneous Catalysis
Molecularly Tailored Dual-Function Deep Eutectic Solvent Enhances Spent Lithium-Ion Battery Cathode Delamination and Regeneration
Surface Segregation-Assisted Direct Regeneration of Spent Layer Cathodes
Upcycling Spent Lithium Iron Phosphate Battery Into Fe-CN3P Single Atom Catalyst for Environmental Remediation
Achieving Stable and Fast Ion Transport in Regenerated LiFePO4 Via Vacancy-Mediated Upcycling
Redox-Mediated Electrochemical Regeneration of Spent LiFePO4 Battery Cathodes
Light‐Promoted Efficient Gold Recovery Enabled by a Polydopamine‐Functionalized Covalent Organic Framework
Solar‐Biohybrid Upcycling of Polylactic Acid Plastics to Alanine
H+/OH− Switchable Coordination Chemistry Enables Sustainable and Selective Critical Metal Recovery from Spent Li-Ion Batteries
Green Recovery of Precious Metals from E-waste via Autocatalytic Leaching
The Weakened Super‐Exchange Interaction Realizes the Direct Regeneration of Spent Lithium‐lon Battery Cathodes
Upcycling of Waste Plastics into Carboxylic Acids for Biodegradable Surfactants
One‐Step Silver Leaching from Manganese–Silver Ore Enabled by Hydrogen‐Bonded Network Formation
Lithium‐Mediated Hydrochloric Acid Dissolution: Enabling Clean and Efficient Recovery of Palladium from Spent Catalysts by Electrodeposition
A Recyclable Cooperative Approach for Selective Lithium Recovery from Industrial‐Grade Spent Lithium‐Ion Battery Black Mass via Oxidative Delithiation and Complexation Mechanism
Insights into the Mechanisms Behind Structural Repair of Spent Layered Cathode Materials for Lithium‐Ion Batteries
Synergistic Co-Recycling: Selective Oxidation of Polyethylene to Dicarboxylic Acids over Spent LiCoO2 Cathodes
Redox-Mediated Lithium Recovery From Spent LiFePO4 Stabilizes Ferricyanide Catholyte for Durable Zinc-Ferricyanide Flow Batteries
14
Mechanical activation-assisted technology for recovering valuable metal elements from spent lithium-ion batteries: A review
Profitability and scalability for waste-to-energy supply chains
Unlocking the value of retired EV batteries: Technologies, application, and commercial models for second-life energy storage in power systems
Environmental and economic assessment of large-scale hydrogen supply chains across Europe: LOHC vs other hydrogen technologies
Review on marine plastic pyrolysis oil: Turning pollution into a maritime fuel
Current production routes and life cycle analysis of “Green Energy-Dense Fuels” from biogas: A comprehensive review
Cost analysis comparison of reference and near-zero energy office building design in Indonesia: a life cycle approach and its sensitivity analysis
Sustainable food waste-to-bioenergy supply chain with rate of return under triple bottom line approach
Life cycle global warming impact of a green hydrogen supply chain: A case study of Australia to South Korea
Potential solution to wheat straw-to-methanol for marine fuel under carbon emission restrictions: A comparative energy, exergy, economic, and environmental analysis
Electrification-enabled production of Fischer-Tropsch liquids – A process and economic perspective
Feasibility assessment of e-methanol value chains: Temporal and regional renewable energy, costs, and climate impacts
Comprehensive spatial LCA framework for urban scale net zero energy buildings in Canada using GIS and BIM
Life cycle external cost assessment of an onshore wind farm in South Africa
3
Biochar-driven multi-stage pyrolysis-roasting-relithiation strategy enables energy-saving and green regeneration of spent LiCoO2 batteries
Facile and efficient regeneration of LiFePO4 battery cathode using a multifunctional lithium source
Quantifying electrokinetic recovery of rare earth elements via electric charge modeling
9
Unlocking value from waste: peroxymonosulfate oxidation for the valorization of precious metals into high-value products
Development of tin oxide catalysts promoting the ring-closing depolymerization of poly(ε-caprolactone) under mild conditions
A hollow sandwich heterostructure with an engineered crystalline–amorphous phase boundary for boosted electrocatalytic plastic upcycling
Regeneration of LiFePO4 from spent lithium-ion battery recycling wastewater via Fenton oxidation-selective precipitation
Selective lithium extraction and Fe–P component reconstruction toward high-performance Nasub4/subFesub3/sub(POsub4/sub)sub2/subPsub2/subOsub7/sub as cathode materials of sodium ion batteries
Rapid room-temperature repair of spent lithium iron phosphate via redox mediators
Full recovery of lithium salts and transition metal oxides from spent ternary cathode lithium-ion batteries
Acid-free photocatalytic recovery of valuable metals from spent ternary lithium battery cathode materials using acetonitrile and dichloromethane
Efficient direct regeneration of spent LiFePOsub4/sub from various degradation states for sustainable battery recycling
2
Recyclable RAFT-3D printing
High-efficiency enzymatic biodegradation of polypropylene-based melt-blown fabric debris
2
Towards a new theoretical approach for disentangling illegal construction waste disposal: A Hong Kong study
Content dynamics and emotional engagement in online zero waste communities: a longitudinal study
31
Integrated Techno-economic analysis and Life cycle monetization assessment for sustainable transportation fuels: Electrified Steam Reforming and Syngas Fermentation of Wood Gasification Syngas
Thermodynamic analysis of biomass-driven polygeneration plants with biogenic CO2 utilization: Comparative assessment of various thermochemical conversion technologies
Heat, Homes and Hidden Impacts: Life Cycle Sustainability Assessment of Low-Carbon Heating in the Built Environment
A Simulation-Driven Feasibility Study of Multicomponent Organic Solid Waste Incineration with Low NOx Emissions in Grate-Fired Beds Using an Advanced BASIC Code
NO emission and heavy metal risk assessment during co-combustion of lean coal and sludge-derived biochar
Comparative techno-economic analysis of novel bioenergy with carbon capture and storage plant versus combined cycle gas turbine with solvent-based CO2 absorption
Environmental synergies and trade-offs in low-carbon transition of power sector: A life cycle assessment of various power generation technologies in China
Analysis of carbon emission trends and mitigation benefits throughout the residential building lifecycle: A case study of Jiangxi Province
Establishment of Environmental Pollution Accounting and Compensation Standards for Manufacturing Enterprises
Life cycle-based environmental evaluation of indian hydropower plants: Insights from a multi-regional input-output analysis
Evaluation the environmental carrying capacity of lithium-ion battery recycling using emergy analysis
Integration of sludge combustion with treatment of hot blast furnace slags: pollution control and adding heating value
Integrated design for ethylene glycol production based on plasma gasification and water electrolysis: Thermodynamic and economic analysis
Gasification-based biomass-to-X system for biomass community: Supply to transportation and industrial sector considering hard-to-abate sector
The implications of production efficiency improvement and subsidy removal strategies during the transition to higher blends of biodiesel in Thailand’s transport sector
A bi-level optimization model of integrated energy system considering waste treatment under uncertainty
Life cycle assessment of the pumped hydro energy storage system in China
A life cycle assessment of biodiesel from waste cooking oil using bifunctional magnetic nanocatalyst
Research on combustion characteristics and parameter optimization of a 500 t/d municipal solid waste incinerator
Transforming discarded graphite into high-performance lithium-ion battery anodes: A green recycling and high-value utilization strategy for spent carbon cathode
Life cycle assessment of external impacts and external costs of a potential offshore wind farm off the Southern African coast
Life cycle assessment of two automobile components: metal versus plastic
A co-gasification strategy of residual municipal solid waste and biomass for electricity generation optimization and carbon reduction
From Winter Wind to Summer Sun: Unlocking the Arctic Region's Sustainable Energy Potential
Scenario analysis of the use of oil palm residual biomass for bioenergy generation: A comparison with fossil fuels
Comparative Analysis of Environmental and Economic Assessment of Batteries for Stationary Applications
Low-temperature microwave co-pyrolysis of medical waste and walnut shells: effective regulation of organic chlorine to inorganic chlorine conversion in pyrolyzed char
Bi-level Optimization and Sustainability Assessment of Data Center Integrated Energy System Based on Emergy Theory
Emergy Evaluation of the Tea-Shiitake Project in the Mountainous Region of Central China
Comparative environmental and cost analysis for renovation and reconstruction in multi-family social housing
Comprehensive analysis of life cycle energy consumption and environmental impact of hydrogen production process via plasma co-gasification of coal and biomass
9
Harmonizing the assessment of (green) hydrogen supply chain: a modular and parametrized life cycle assessment framework
Global cost drivers and regional trade-offs for low-carbon fuels: a prospective techno-economic assessment
Boosting tenfold recycling profit by a one-step calcination strategy for upcycling spent LiCoO2 to high-value Li6CoO4
Hydration equilibrium-controlled cation–anion coordination competition for precise recovery of all valuable metals from spent lithium-ion batteries
A framework for ground-up life cycle assessment of novel, carbon-storing building materials
Transition pathways to electrified chemical production within sector-coupled national energy systems
Rapid electrothermal rejuvenation of spent lithium cobalt oxide cathode
Techno-economic and life-cycle assessment for syngas production using sustainable plasma-assisted methane reforming technologies
Upcycling spent medium-Ni cathodes via novel liquified salt sourcing
12
Rural domestic waste generation characteristics and treatment-related greenhouse gas emissions: A case study of Guangdong Province, China
Influences of Future Anthropogenic Emission Changes in China on Atmospheric Nitrogen Deposition in the Northwestern Pacific
Facet and crystallinity-dependent transformation of lepidocrocite impacts cadmium redistribution
Low-Molecular-Weight Organic Acids Constraints on the Divergent Weathering and Lead Mobilization of Sulfidic Minerals
Distinguishing the contributions of organic matter and iron (oxyhydr)oxides to zinc availability in paddy soils surrounding lead-zinc mines
Assessment of PCDD/F and dl-PCB levels in air before and after the start-up of an energy recovery plant in northern Spain
Synergistically promoting humification and polluting gas reduction in cherry tomato straw composting via carbon bioavailability management
Life cycle analysis of mechanical recycling vs. conventional incineration for brominated acrylonitrile butadiene styrene (ABS) derived from WEEE
The role of Penicillium brevicompactum in bioprocessing plastic and metals from Printed Circuit Boards
Effect of vermicomposting of aquaculture fish sludge with lettuce residue and wastepaper on potentially toxic elements and persistent organic pollutants
Biofortified vermicompost: Exploring bacterial community dynamics and enzymatic pathways through bacteriome analysis for arsenic bioremediation in mine waste
Carbonation Impact on the Stabilization of Heavy Metals in Carbon-rich Geopolymers Based on Gasification Slag and Fly Ash
38
Mitigation of Greenhouse Gas Emissions Mediated by Functional Microbial Dynamics under Optimized Composting Condition
Two-Step pyrolysis enabled by bentonite catalysis for the co-production of bioactive humic acid and functional carbon-clay composites
Microbial Community Succession in Response to In-situ Coordinated Leaching of Ion-adsorption Rare Earth Ores
Microbial necromass accelerates humic acid formation by reshaping DOM transformation pathways during composting
Synergistic removal of As, Cd, and Pb from soil using composite eluent of Oxalic Acid and Tetrasodium Salt of N,N-bis(Carboxymethyl)-L-Glutamic Acid
Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties
Employing L-cysteine-mediated modulation for nickel biorecovery: Bioseparation-photocatalytic upcycling from wastewater
Utilization of waste sludge-derived biochar in sustainable planting ecological concrete: Integrating structural, ecological, and environmental benefits
Amoxicillin and copper affect humification during compost: Insight into dissolved organic matter and bacterial community succession
Comparative durability of NaOH-activated and Na2SiO3-activated geopolymer for Pb solidification/stabilization under chemical attack
Thermophilic keystone taxa drive humification in coal gangue co-composting via shikimate-pathway carbon flux
Enhanced removal of Pb (II) and sulfate by immobilizing acid-tolerant sulfate-reducing bacteria on magnetic chitosan
Indicator-based sustainability assessment of poultry litter ash (PLA) as a supplementary cementitious material using an AHP-TOPSIS-RSM framework
Experimental Study on Degradation Characteristics of Domestic-source Contaminated Soil Based on Mechanical Properties and Organic Components
Life cycle assessment of concrete with ceramic waste powder and stone Dust: A central India case study
Self-sacrificial template anchoring strategy for the preparation of highly dispersed metal site catalysts for efficient degradation of tetracycline hydrochloride
Modified biochar mitigates nitrogen loss in distilled grain waste composting by modulating microbial community assembly and function
Dual benefits of indirect mineral carbonation of titanium gypsum: waste gypsum recycling and carbon sequestration
Subsoil incorporation of vegetable waste reduced odor emissions and promoted nutrient recovery
Importance of inorganics in waste papers in regulating pore structures of resulting activated carbon for efficient removal of phenol and tetracycline
Life cycle assessment of wood plastic decking manufacturing: Reduction of environmental impacts based on an industrial case study in China
Elucidating the clay-mediated fixation mechanism of humic acids in composting systems using LC-MS and spectroscopic techniques
High temperature and humification reduce DNA viruses in food waste composting
Bacterial resource allocation strategies to reduce CO2 emission and enhance carbon conversion by exogenous additives in chicken manure composting
Exploring the potential of tea waste ash in cement mortar: A focus on mechanical and durability properties
Atmospheric microplastic emissions from organic waste composting: Field-based assessment and exposure implications
Amorphous phase-engineered Cr-based coordination polymers for efficient gold recovery in highly acidic environments
Optimized preparation of dredged sediment-based functional ceramsite: thermodynamic profiling and formation mechanism
A novel approach based on PEM electrolysis technology for iron recovery from acid mine drainage: performance and mechanism
Novel Thermal Modification of Phosphate Tailings for Enhanced Heavy Metals Immobilization in Soil
Excellent adsorption performance of sulfated yeast for heavy metal ions: High capacity and selectivity for rare earth elements
Life Cycle Environmental and Economic Assessment of Co-combustion Strategies for Raw and Landfilled Municipal Solid Waste
Upcycling waste polyimide foam into efficient adsorbent for deep removal of nickel complex from wastewater
Greenhouse gas emissions in a microbial fuel cell-assisted composting system: Microbial insights into bacterial structures and genetic functions
Comparison of Phosphorus Transformation and Microbial Functional Potential in Aerobic and Facultative Composting of Livestock and Poultry Manure
Refined Bifunctional Deep Eutectic Solvent for One-Step Selective Indium and Tin Recovery from Spent LCDs
Extended thermophilic phase promotes fungal-bacterial collaboration to facilitate humification in batch-fed composting
An investigation of the engineering properties and environmental impact of low-temperature modified electrolytic manganese residue for karst grouting materials
62
Spin-State Engineering at the FeS2 Interface via CO2: Dual-Channel Activation of Fe(II) for Enhanced •OH Generation
Self-Driven UV/Periodate Process for Cu-EDTA Decomplexation and In Situ Copper Recovery
Metal-Site Reducibility Governs C–H Activation and PAH Degradation in Ion-Exchanged Bentonite
Influence of Transition Metal Ion Contaminants on the Performance of Amine-Based Solid Sorbents in Direct Air Capture
Life Cycle and Local Environmental Impacts of Floating Photovoltaic (FPV) Systems
Mitigating Hidden Climate Change Impacts of Timber Cities Critically Depends on Proactive Forest and Waste Management
Assessing Trade-Offs in Climate Impacts across Various Circular Economy Strategies for Japan’s Battery Industry
Selective and Sustainable Recovery of High-Value Metals from e-Waste via a Glucose-Mediated Hydrothermal Process
Shaping China’s Automotive Lithium-Ion Battery Recycling System to Meet the Retirement Wave: Insights from Integrated Modeling
Green and Facile Recovery of Silver and Aluminum from Waste Photovoltaic Modules: A Novel Mechanochemically Driven Pathway
Filterable and Condensable Particulate Nitrate Emissions from Plumes over North China
Insights into Extracellular Respiration Interfaces: Linking Molecular Redox Sites to Humic-Reducing Microorganisms in Biowaste Compost
Photochemical ROS-Driven Autocatalytic Transformation of Heavy Metal–Xanthate Complex Pollutants in Tailings Pond
Biogenic Carbon Storage in the Technosphere
Strategies for Improving Carbon Emission Efficiency of Municipal Solid Waste Management System in Western China: A Transition toward Environmental Equity
Atomic Building Blocks of Global Buildings
Role Transformation of Incineration Plants in Carbon Emissions from Municipal Solid Waste Treatment after Source Classification
Ion-Specific Precipitation of Extractants Enables Rare-Earth Separation and Wastewater Remediation from Solvent Extraction of Critical Elements
Carbon–Mineral Slurry Electrodes for Energy-Efficient Lithium Leaching from Low-Grade Clay Feedstocks
Mechanistic Divergence of Perrhenate Reduction by Mackinawite through Coprecipitation and Adsorption
Parametric Life Cycle Assessment of Chemical Recycling of Nylon-6 to Caprolactam
Harmonising Life Cycle Assessment of Biosolids Processing Systems: Reducing Variability and Identifying Key Sources of Variation
Real-World Life-Cycle Assessment of Industrial-Scale Lithium-Ion-Battery Hydrometallurgical Recycling
Recovery of Silver from End-of-Life Silicon Solar Panels via an Oxidative-Coordination Synergistic Approach
Global Soil Nitrous Acid (HONO) Emission Has Aggravated PM2.5 Pollution and Health Risks over the Last Century
Inversion Approach for Inferring Mixing State and Improving Optical Estimation of Coated Black Carbon Using Bulk-Volume Variables and Number-Size Distributions
Prospective Characterization Factors for Assessing Climate Change Impacts in Life Cycle Assessments
Cost and Carbon Implications of Industrial Organic Load Reduction across Water Resource Recovery Facility Typologies
Upcycling Waste Etchant into a Doped-Cu2O Electrocatalyst for Efficient Acetoxime Synthesis from Nitrate and Acetone
Beyond Tires: 45 Years of Rubber Flows and Stocks in China (1978–2022)
Dissolution Behavior of Lithium-Ion Battery Cathode Materials in Aquatic Systems: Key Drivers and Molecular Mechanisms
Geochemical and Isotopic Fingerprint-Based Identification of Sulfate Source Regional Characteristics and Evolution of Groundwater Impacted by Acid Mine Drainage (AMD) from a Nonferrous Metal Mining Area
Environmental Impact of Machinery and Equipment: A Comparison between EXIOBASE, National Environmentally Extended Input–Output Models, and Ecoinvent
Integrating Continuous Cover, Manure Management, and Anaerobic Digestion Strategies on a Pennsylvania Dairy Farm: A Life Cycle Assessment
Circular Carbon Capture: Comparative Life Cycle and Techno-Economic Assessment of Waste-Derived Activated Carbons
Comparative Life Cycle Water Use Assessment of Diverse Hydrogen Production Pathways
Spatiotemporal Characteristics of Global Building Material Intensity Revealed for Circular and Low-Carbon Construction
Three-in-One Self-Sacrifice Mechanism Driving Green and Universal Critical Metals Leaching from Spent Lithium-Ion Batteries
Unlocking Synergies: Climate Mitigation, Clean Air, and Health Benefits of Sustainable Bioenergy in China
High-Selectivity Separation of Lithium from Spent Lithium-Ion Battery Leachates Using Surface-Modified Commercial Nanofiltration Membranes
A Large Language Model-based Framework to Retrieve Life Cycle Inventory and Environmental Impact Data from Scientific Literature
Unveiling the HONO Offsetting Effect: Rethinking NOx Emission Controls during Urban Ozone Pollution Episodes
Toward a Sustainable Future: A Holistic Environmental, Social, and Economic Assessment of Industrial Recycling for All-Solid-State Batteries with Oxide-Based Electrolytes
Life Cycle Assessment to Quantify Global Warming and Human Health–Respiratory Impacts of Using Composites from Waste Wind Turbine Blades as Feedstock for Cement Clinker and Fiberglass Production
SemaNet: Bridging Words and Numbers for Predicting Missing Environmental Data in Life Cycle Assessment
Multisectoral Optimization of Residual Resource Valorization for the Bioeconomy
Comparative Environmental Assessment of Three Urine Recycling Scenarios: Influence of Treatment Configurations and Life Cycle Modeling Approaches
Mapping the Recycling Potential of Bottom Ashes from Waste-to-Energy Plants toward Circular Economy: Evidence from China
Advancing the Economic and Environmental Sustainability of Rare Earth Element Recovery from Phosphogypsum
Transition Metal Recovery Using Manganese-Oxidizing Microbes and Recycled Carpet Fiber
Life-Cycle Emissions and Human Health Implications of Multi-Input, Multi-Output Biorefineries
Life Cycle Emissions and Health Cost Impacts of Producing Ethanol and Electricity from Willow and Switchgrass in the Riparian Buffers of Mid-Atlantic United States
Strategies for Designing Circular, Sustainable, and Nonpersistent Consumer Plastic Products: A Case Study of Drinking Straws
Harnessing a Genetically Engineered Self-Assembling Protein Biosorbent for Efficient and Selective Rare Earth Element Recovery
Aerosol Uptake Coefficients of Isoprene Epoxides: Determination and Parameter Estimation from Online Field Measurements of Organic Molecular Markers
Selenium(VI) Removal from Challenge Waters by Continuous-Flow-Through Iron Electrocoagulation
Antimony(V) Retention by Lepidocrocite: Sorption, Coprecipitation, and Extractability
Recycling or Second Use? Supply Potentials and Climate Effects of End-of-Life Electric Vehicle Batteries
Techno-Economic Analysis and Life Cycle Assessment of Alternative Fuels for Locomotives in the U.S. Freight Rail Sector
Closed-loop Lithium Recovery from Ternary Lithium-Ion Batteries: Dual Utilization of Waste Materials
Life Cycle Assessment of Lithium-Ion Battery Recycling: Evaluating the Impact of Recycling Methods and Location
Mechanochemical Ball Milling Achieves Green and Ultrahighly Efficient Recycling of Lithium-Ion Batteries
1
Life cycle analysis for emissions of scientific computing centres
9
Alkyl-Aryl 1,10-Phenanthroline-2,9-Dicarboxamides: Solvent Extraction, Potentiometric Sensing, and Coordination Studies of Hazardous Metals
Selective Dissolution of Oxides of Uranium in Ionic Liquid with Subsequent Electrodeposition: Exploring Sustainable Nonaqueous Processing
Sustainable Gold Mining from E-Waste: Robust Hollow Magnetic Gold Catchers with High Selectivity and Recyclability
Electrochemical Kinetics and Selective Separation Mechanism of Erbium and Europium on a Liquid Zinc Cathode
Influence of Compositional Complexity on Amorphization Resistance of Swift Heavy Ion Irradiated Titanate Pyrochlores
Dual Synergistic/Antagonistic Mechanism of Protonated-Amino Bidentate Ligand for Selective Separation of Nickel and Cobalt under High Acidity
Recycling of Valuable Metals from Low-Grade Nickel Sulfide Ores by Preroasting Followed by Chlorination with FeCl3·6H2O: Thermodynamics, Kinetics, and Process Intensification
Unlocking Strategic Metals from Zinc Smelting Dust: Ultrasound-ClOsub2/sub Synergy and Atomic-Scale Leaching Mechanisms
Isovalent yet Dissimilar B-Site Occupants in Y2M2O7 Pyrochlore: Repercussions on Structure, Optical Properties, and Response under Extreme Conditions
161
Developing resilient multi-pollutant detoxifying bacterial consortia with strains derived from earthworm gut, vermicomposting, and composting systems: A tryst with large-scale MSW valorization destiny in a real-world urban scenario
Debromination of end-of-life printed circuit boards through a zero-discharge solvothermal process
Sustainable valorization of limonitic laterite via phosphoric acid leaching: Selective recovery of nickel and cobalt with Co-production of iron phosphate under atmospheric conditions
Highly efficient recovery of gold by selective sulfide reduction from chlorine leachate
Multifunctional additive-driven efficient critical metal recovery from spent lithium-ion batteries via all-solid-state subcritical process
Predicting and interpreting the effects of steel slag amendment on soil acidification across diverse agricultural conditions
Revisiting emergy algebra: The cross-looping problem in emergy accounting on systems networks
Smart production of bioenergy from food waste: A multi-objective approach considering inflation and subsidies
Reducing greenhouse gas emissions from polymer processing at end-of-use
Life cycle assessment of a ferrochrome smelting complex: Insights from industrial operational data
Enhanced bioremediation performance of Mn(Ⅱ) contamination in acidic wastewater by immobilized composite fungi on biochar
Unlocking circularity in rural waste management in northwest China: A systematic framework to quantify energy-environment-pollution nexus
Environmental impacts and trade-offs for New Zealand's energy system
Effect of leaching reductants on the environmental impacts of an advanced hydrometallurgical battery recycling process
Life cycle assessment of carbonated recycled concrete fine products
Application of novel eco-friendly membranes prepared with recycled high-impact polystyrene to municipal wastewater treatment
Enhanced chalcopyrite bioleaching performance through CO2-driven process intensification
Occupational Health–Life Cycle Assessment (OH-LCA) of green waste management: A case study of Thailand's steel waste processing industry
An integrated approach towards utilizing bittern for chemicals recovery: Technoeconomic and sustainability analysis
Geospatial optimization of compost distribution for cropland under California’s organic waste diversion strategy
Selective separation of bismuth from high-acid copper electrolytes: design of highly stable antimony-based adsorbent and investigation of strong adsorption mechanisms
Challenges of bismuth interference to copper-arsenic separation during electrolytic purification
Enhancing thermal insulation with cellulose acetate-based composites: Impact of environmentally-friendly binders on performance and durability
A contribution to Urban Mining Potential through a probability-of-conformity-based indicator for optimizing reuse of cut concrete slabs
Assessing trade-offs between milk production and greenhouse gas emissions on French dairy farms using vine-copula-based regressions
Socio-demographic and waste system determinants of recycling performance across Australian municipalities: a spatial analysis highlighting urban and regional differences
Strategic valorization of biogenic CO2 from kraft pulp mills
Regionally differentiated sustainability trade-offs between primary and secondary resource production routes for LIB cathode materials in China
Global warming potential data analysis from environmental product declarations
A green bio-cementation strategy based on microbially induced carbonate precipitation for preventing leachate leakage during the in-situ leaching of ionic rare earth ores
Recovery of Fe, Pb, and Zn from jarosite residues and realization of clean production through reduction roasting–grinding magnetic separation–tailings backfilling: effects, mechanisms, and applications
Co-extraction and stepwise purification of germanium and chlorine from zinc oxide leaching solution
Incorporating life cycle assessment into energy transition policy: displacing coal with natural gas
Valorization of high-iron bauxite residue using low-temperature alkali beneficiation
Evaluation of the potential environmental impacts and benefits of producing alkali-activated concrete from bauxite residue
Twin thermal desorption strategies for contaminated soil: A process-based life cycle analysis for greenhouse gas mitigation
On the social implications of technological processes: Towards hybrid social life cycle analysis (H-SLCA)
Enhanced immobilization of heavy metals in cement using functionalized chitosan: Leaching reduction and performance improvement
Comparing greenhouse gas emission accounting tools for organic dairy stakeholders
Process parameter optimization for greenhouse gas mitigation during green-waste composting and mechanistic insights from microbe–environment networks in treatments with contrasting outcomes
Integrated environmental and economic efficiency assessment of lithium extraction processes in China: An LCA-TCM-DEA framework
Efficient recovery of high-purity 2D flaky R-FePO4 from lithium extraction slag leachate via solvent extraction and chemical precipitation
Integrated techno-economic and environmental assessment of lithium-ion battery recycling in Chile
Biochar-mediated regulation of gaseous emissions and microbial community during the whole vermicomposting process
Comparison of greenhouse gas emission reductions in wood-based plastics production in Japan
UCO provides greater carbon reduction potential than plant oils across diverse biodiesel production technologies
Towards fossil-free ethylene: ex-ante techno-economic comparison of three alternative processes at low technology readiness levels
Characteristics and techno-economic analysis of nickel-cobalt-manganese composite oxides produced by the flame synthesis method
Metal removal and valorization using Dactylococcopsis salina 16Som2: Insights into metal binding properties and catalytic activity of metal-enriched biomass
Mechanism of efficient selective separation and purification of Cu, In, and Ga in the deep eutectic solvents system
An integrated framework for synergistic multi-element, cross-media pollution control in organic solid waste treatment system
Techno-enviro-economic evaluation of using recycled concrete aggregate in asphalt mixtures: A life cycle assessment and multi-criteria decision-making framework
Carbon footprints of recycling straw waste into building materials: A life cycle assessment (LCA) study
Integration of life cycle sustainability assessment and process simulation to achieve an eco-design in linear alpha olefin (LAO) plant
Impacts of iron additives on enzymatic activities and nitrogen cycling during composting: Microbial and biochemical insights
Interpretable machine learning enables mechanistic insights and predictive control for clean and sustainable copper electrorefining
Hour-level humification of papermaking waste residue to produce honeycomb-like controlled-release fertilizer
Ultrafast and selective recovery of lithium from spent cathodes via flash Joule heating-driven chlorination
Intelligent control of food waste composting based on PID and LSTM: analysis and comparison of strategies
Multi-dimensional sustainability assessment of 2-ethylhexanoic acid production pathways: Integrating techno-economic analysis with planetary boundaries framework for butyraldehyde and isooctanol processes
Study on mix ratio optimization, microstructure evolution, and economic benefits of iron tailings-fly ash-limestone powder ternary geopolymer
Pineapple-crown papers with partial NaOH substitution: Performance, costs, and life-cycle footprints
Efficient extraction of valuable metals and preparation of FePO4·2H2O from lateritic nickel ore via clean magnetizing roasting-selective leaching process
One-step treatment of hydrometallurgical wastewater of photovoltaic laminates with ferrite process under weak alkali conditions: Regulation, precipitation characteristics, and mechanism
Turning NH3 liability into humus asset: In-situ microbial engineering as a priority approach to compost gas management
Hydrothermal carbon-based sulfate-reducing bioagent for enhanced sulfate reduction and acidification mitigation in oligotrophic environments
Energy-integrated plastic-to-X optimization via machine learning-embedded graph-theoretic approach: EU 27 study
Prospective life cycle assessment of the Spanish electricity mix (2023–2050): Interrelation between climate change, water footprint, and costs
Sustainable utilization of red mud and coal gasification fine slag for iron recovery and cementitious material preparation
Cradle-to-gate assessment and optimization of sustainable geopolymer concrete
The positive effects of refluxing thermophilic compost materials on composting at low temperatures: insight into the large-scale composting experiments
The evolving structure of emissions in the transition to renewable electricity systems
Multi-objective optimization of crop distribution in arid agriculture: From water-carbon-food nexus perspective
Sustainable alkaline cements with different Ca contents for stabilisation of copper mine tailings
Simplifying thermal pretreatment of lithium iron phosphate cells: Benefits of whole-cell processing without inert atmospheres
From bamboo biomass to geopolymer binders: Valorizing SiO2 and K2O-rich residual ashes for the low-carbon construction
Application strategies of cathode materials in retired lithium battery in cascade biomass pyrolysis and reforming for hydrogen production
Innovative roadmap for household organic waste management in the European Union: Pathways to a circular economy
Environmental footprint assessment and mitigation strategies in agricultural cooperatives: A case study towards cleaner production in arid regions
Life cycle assessment of embodied carbon from buildings’ demolition waste management systems in Hong Kong
Assessing the environmental impact of operating a Swedish data centre in subarctic climate
Wastepaper cellulose could replace polyester fibre and packaging films to avoid 270 Mt CO2ea−1
From waste to value: Exploring the social representations of composting
A green and efficient process for extracting lithium from the clay-type lithium ore
Germanium enrichment from lignite via selective ashing of germanium-bound humic acid followed by water-washing desalination
Circular economy systems analysis of high-density polyethylene (HDPE) plastic packaging by informal recycling in Brazil, Global South: Quality assurance, rejects and value appropriation
Life cycle assessment of open and closed hydroponic systems for vegetable (tomato and cucumber) production in arid lands
Performance enhancement of recycled concrete aggregates using sodium alginate-aided microbial-induced carbonate precipitation
Physically based machine learning for the multi-objective optimal design of partially recycled materials: The case study of rubber resources in the automotive industry
Multi-scale cross-media modeling of ammonia emissions in membrane-covered aerobic composting of dairy cow manure and wheat straw
Towards carbon-negative primary aluminium production: Integrating biomass resources and renewable electricity
Material flows, stocks, and environmental emissions of 11 plastic additives in China from 1958 to 2060
Environmental assessment of noble metals recovery from e-waste: an ESCAPE and LCA-based comparative analysis towards design for sustainability
Comparative life cycle assessment of various hydrogen pathways for cleaner methanol synthesis
Policy instruments for circular economy: Evidence-Based assessment of sustainable waste management in the UK and Finland
Colloid mediated redistribution of metal species during alkaline regulation of bauxite residue: pH-dependent mobilization-immobilization dualities
Assessment of construction spoil generation: A case study in China
Fe synergistic redox Cu(II)-As(V)-H2SO3 in copper smelting dirty acid wastewater: Kinetic-Thermodynamic mechanism and technical feasibility
Research of the enhanced separation behavior of radioactive wastewater in microchannels
Economic and environmental assessment of natural gas-ammonia co-firing
Chaotic circuit-enhanced electrokinetic leaching of ionic rare earth ores with (NH4)2SO4-MgSO4 compound salt
Glycine amino acid additive enhances the CO2 capture efficiency of cement-based materials
Plastics waste to olefins in a circular economy: Techno-economic and life cycle comparison of hydrothermal liquefaction and pyrolysis
Ecological and economic impacts of the implementation of separate collection of biowaste on a global scale
Temporal dynamics in life cycle assessment: Comparing static and dynamic characterization factors for climate impact assessment and mitigation potential of NZEB prototypes
Assessing material flow and housing stock using representative archetypes and sustainability indicators
Intelligent prediction of food waste compost maturity using machine learning based on rapid detection process metrics
Effects of iron on greenhouse gases and ammonia emissions and related genes in swine manure composting
Comparative life cycle assessment of a modular cross-laminated timber residential building designed for disassembly and reuse versus traditional wood frame construction
Towards circular textiles: Life cycle assessment of homewear produced from regenerative cotton and post-industrial waste versus conventional cotton
Citric acid as a green rejuvenator: mechanistic insights into the complete recovery of floatability for oxidized arsenopyrite
Life cycle assessment of hardwood cross-laminated timber production in the eastern United States
Electrodialysis as a route for separating metals from NCA-type automotive lithium-ion batteries
A tandem enzymatic-electro upcycling of waste PET into high-value chemicals: Process development and sustainability assessment for circular economy transition
Selective platinum recovery from Pt-Co solutions via amine/phosphine oxide-loaded solvent-impregnated resins: mechanisms and selectivity
From stainless steel to batteries: industrial-scale closed-loop hydrometallurgical integration for ferronickel-to-precursor conversion
Life-cycle climate change and resource use decoupling indicators for product-service systems: Case study on rental business model
Multi-model fusion for evaluating carbon emissions in China's provincial sheep production and developing precise reduction strategies
Performance enhancement of the flash furnaces in copper industries via 4E analysis using hydrogen–natural gas blended fuel and oxygen-enriched air
A novel performance–economics framework for upcycling spent Li-ion battery cathodes to accelerate battery circularity
Life cycle assessment of a DC-LINK capacitor used for automotive applications
Climate benefit of timber building compared to reinforced concrete alternative: Impact of biogenic carbon modeling methods
Unlocking the recycling potential of dysprosium for balancing supply and demand across Chinese provinces
A logistics design for treating, collecting, and distributing household organic waste: A case study in the commune of Quilpué, Chile
Urban-industrial synergies in Sustainability: Evaluating the Co-processing of MSWI fly ash in industrial kilns from environmental and economic perspectives
Multicriteria performance assessment of ‘low w/c + low cement + high dosage admixture’ Concrete: Environmental, economic, durability, and mechanical performance considerations
From aluminium to composites: A comparative social life cycle assessment of automotive lightweight components
Scenario-based life cycle assessment of cellulose nanocrystals production from agro-industrial by-products in 2040
Recovering copper as high-purity CuO nanoflowers from the acidic waste etchant via selective Fe and As removal and reactive crystallization
Synergistic infrared Co-pyrolysis for integrated resource Recovery: Gas-Induced metal extraction from spent lithium-ion batteries and bio-oil upgrading
Co-production of high-quality syngas and valuable elements: combination of chemical looping gasification and acid leaching to cleanly dispose red mud solid waste
Structure, actors, and interdependencies between informal and formal e-waste management supply chain in Bangladesh
Mechanistic study on the swelling/solubilization behavior of EVA by NMP and BDG for efficient recycling of PV modules
Tracing resource flows and reducing environmental impacts during construction: Assessment framework for on-site waste efficiency
Artificial intelligence-based optimization of the WEEE reverse chain in São Paulo − Brazil to promote economic, environmental and social benefits
Greenhouse gas emissions, energy and cost-efficiencies associated with liquefied biogas-powered heavy-duty timber trucks in industrial roundwood transportation
From intentions to action: Enhancing organic waste separation in households in Portugal through psychosocial and operational factors
Coupling emission intensity with production efficiency in global beef production
Magnetic immobilized laccase drives oxidative coupling for simultaneous removal and detoxification of flotation reagent 1-nitroso-2-naphthol in mineral processing wastewater
High-efficiency recycling of spent Ni-Cd batteries via a low-tech and innovative approach: Waste to nano-scale CdO
A generalized schema to publish and share life cycle inventories (LCI): Exemplary case of an aviation fuel supply chain
Process development and techno-economic feasibility of thiosulfate-based hydrometallurgical recycling for waste printed circuit boards
Assessment of environmental impacts of green waste resource utilization in Beijing Tongzhou urban subcenter under multi-scenario simulation
Efficient physical extraction of Al from Li-ion battery Al dross using vacuum melting-vibration screening
Global environmental footprints of electricity supply in China
Wood-for-construction supply chain digital twin to drive circular economy and actor-based LCA information
Environmental life cycle assessment of renewable starch alternative plastic: a comparative analysis of end-of-life scenarios in the Republic of Korea
A decision-making flowchart for tailings Stabilization: Assessing environmental and economic impacts
Sustainability assessment of waste recycling in low-impact development using an integrated LCA-LCC approach
Comparison of life-cycle environmental impacts of onshore and offshore wind farms during the southward movement of wind power development in China
Reuse of LED Lamps: Exploring the durability of functional units discarded as WEEE
Exploring the boundaries of life cycle analysis in environmental hazard assessment
Chalcocite-catalyzed Fenton coupling with biodegradation for N,N-dimethylformamide treatment: insights into mechanism and cost-effectiveness
From mining to recycling: Identifying carbon mitigation pathways across the full life cycle of China's lithium-ion battery industry
Progressive prediction of embodied carbon emissions across stages of schematic design with machine learning
Decision making methodology for biowaste management planning support: Addressing an EU directive
Recyclable polyester textile waste-based composites for building applications in a circular economy framework
Landfill footprint geometrical design evolution and land surface thermal heterogeneity
Environmental impact of three different engineering thermoplastics: How much does it change when using recycled polyamide?
Hospital plastic waste valorization through microwave-assisted Pyrolysis: Experimental and modeling studies via machine learning
Supply chain design of biocarbon production from Miscanthus through hydrothermal carbonization in southern Ontario: A life cycle assessment perspective
4
Tendencies of Soil Microbial NO Emissions During HI‐SCALE as Predicted by a Nitrification/Denitrification Scheme
Hourly Nitrogen Oxides Emissions Estimated From TEMPO and Comparison With Facility‐Level Monitoring Data
Nitrogen Oxides in the Remote Marine Environment: Implications for Oceanic Emissions and Photolysis of Particulate Nitrate
Non‐Negligible Uptake of Nitrous Acid in Present‐Day Clouds
3
Aromatic Ketone-Mediated Two-Electron Lithiation for Rapid and Room-Temperature Regeneration of Spent LiFePO4 Cathodes
Hydrogen-Based Reduction Boosts Sustainable Iron Production from Red Mud
Atmospheric Corrosion-Driven Redox Coordination Enables Spontaneous Carbonate Conversion of Lithium-Ion Battery Cathodes
4
Chemically Recyclable Polyester Miscible with HDPE Transforms Contamination into Functional Enhancement
Theory for Enzymatic Degradation of Semicrystalline Polymer Particles
On-Demand Recycling of Polylactic Acid–Based Blends into Upgraded Materials with Customizable Compositions
Upcycling Waste Polypropylene into Multifunctional Homogeneous Additives for Simultaneously Enhanced Mechanical Performance and Processability
1
Paper-Mill Waste Derived Bioplastic with Excitation- and Time-Dependent Phosphorescence Color for Sustainable Flexible Anti-Counterfeiting
1
Building material stock drives embodied carbon emissions and risks future climate goals in China
18
Effective recycling of spent lithium-ion batteries via radiolytic radical reactions
Oxidation-reconstructed Li+ transport enables high-tap-density single-crystal regeneration of spent LiNi0.5Co0.2Mn0.3O2 positive electrodes
Pathways to cost-optimal and net-zero emissions irrigation in the United States
Maximizing energy utilization and lithium leaching efficiency via sequential electrochemical dual-oxidation and soaking-relaxation
Efficiency hierarchy and optimization of waste incineration in China to balance disposal and energy supply
Self-driven recycling of spent Li-ion battery materials with electricity generation
Direct aluminium-alloy upcycling from entire end-of life vehicles
Bio-based oxalic acid production in Issatchenkia orientalis enables sustainable rare earth recovery
Microwave-alkali co-activated persulfate enables minute-scale fertilization of food waste with high fulvic-like acid yield
A three-in-one strategy for lithium recovery and upcycling of spent cathode materials
Flash upcycling of spent LiCoO into oxygen-suppressed lithium-replenishing agent for high-performance batteries
Lithium-ion battery recycling through an integrated electro-membrane crystallization technology
Primary material supply configurations and domestic recycling for cost-effective battery material production in the US
Fractionated degradation and valorization of polypropylene waste into sulfonate surfactants
Efficient recycling of spent Li-ion battery cathodes by laser-induced high-temperature thermal shock
Extraction of valuable metals from acid mine drainage by an electrochemically activated limestone system
Lithium-ion battery recycling relieves the threat to material scarcity amid China’s electric vehicle ambitions
Green energy and steel imports reduce Europe’s net-zero infrastructure needs
5
A water-soluble binder for recyclable lithium-ion batteries
Component self-assembly for reciprocal urban mining
Expediting co-benefits of tailored municipal solid waste management strategies globally
Improving waste systems in the global south to tackle international environmental impacts
Sustainable gold extraction from ore and electronic waste
4
Global stratospheric methane loss from satellite observations
Electroextraction of low-concentration redox-active heavy metals with Eθ < 0 V from acid mine drainage
Sustainable separation of rare earth elements from wastes
Suppressing mechanical property variability in recycled plastics via bioinspired design
1
Valorization of lithium hardrock concentrates into battery raw materials and commodity products
2
Selective cobalt and nickel separation by bioacid-mediated electrowinning
One-step separation of lithium from natural ores in seconds
7
Artificial intelligence-related technologies for municipal solid waste management: A review and new insights from smart cities
Framework for unified municipal solid waste management using centralized and decentralized facilities: Case study of Nashik city in India
Deploying small vertical axis wind turbines on urban rooftops — A parametric, dynamic, and hybrid life cycle energy and greenhouse gas emissions analysis
Mapping urban building material stocks to understand potentials for circular construction: A case study in Germany’s Ruhr area
Mapping Cement Stock and Flow at the Chinese city level
Prioritizing low-carbon materials and reducing material quantities to mitigate embodied GHG emissions in buildings
An Innovative Method for Rapid Estimation and Optimization of Building Embodied Carbon Emissions
20
Rare Earth-Derived Conductive Zeolite Electrodes Empower NH4+ Recovery from Mining Wastewater via FCDI and Their Application as Ammonia Release Fertilizer
Electrocoagulation for the Simultaneous Removal of Copper and Arsenic from Acid Mine Drainage: Performance and Mechanisms
Sulfur Recovery from Spent Caustic Streams: Enabling Selective Transformation via Tandem Electrochemical–Chemical Strategy
Leaching Behavior and Toxicity of Solid Waste from Ore-Based Lithium Extraction: Implications for Safe Storage and Resource Utilization
Greenhouse gas emissions from black soldier fly composting of silver and silver sulfide nanoparticle-enriched sludge
Simultaneous Sulfur Black 1 dye removal and Na2S recovery via a sulfur-circular process: Advancing closed-loop textile wastewater treatment
Balancing climate impact, resource use, and environmental safety: Assessment of treatment options for lithium-ion battery recycling wastewater
Highly efficient Au recovery from acidic E-waste leachate using electrochemical nickel membrane reactor
Pilot-Scale Recovery of High-purity Li2CO3 and FePO4 from Real Wastewater for Sustainable Full Synthesis of LiFePO4 Battery
Self-Driven Electrochemical Separation-Recovery System for Simultaneous Recovery of Copper, Phosphate and EDTA from Electroless Plating Wastewater
Enhanced Lithium Recovery from Simulated Lithium-Ion Battery (LIB) Leachate Using Supported Liquid Membrane Contactors: Effects of Organophosphorus Extractants and Real-Time Wetting Monitoring
Sustainable Production of High-Purity Crystalline FePO4 from Sludge for Battery Electrodes
Ultrasonic-induced water-oil interface of microdroplets: A selective and rapid green approach for gold recovery from e-waste
Biogenic Cu2-xSe nanoparticles with vacancy engineering quickly upcycle cobalt from wastewater for photothermal antibacterial and desalination
Sustainable electro-enrichment recovery of valuable metals from typical bulk tailings
Enhanced recovery of rare earth elements from mine wastewater using microbial-derived ferrous sulfide
Efficient decomplexation of Cu(II) complexes and Cu(II) recovery via one-step Fenton-like oxidation/adsorption processes mediated by nanoconfined hydrous Co-Zr oxides
Sulfidation methods determine longevity and performance of zerovalent iron: Mechanistic insights into trichloroethylene removal and aging resistance
Electrochemical decomplexation of Cu(II)-citrate and copper recovery via peroxymonosulfate activation with N,O co-doped carbon felt cathode
Photovoltaic driven carrier-facilitated membrane process enables efficient and low-carbon recovery of spent lithium ion batteries
1
Should the market decide where the waste goes? Municipal bidding war between private landfills in Santiago de Chile

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.