Environmental Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 271

Article ‘Count’ for Environmental Engineering.

Journal Count Share
7 5.46
Spent Battery-to-Catalyst: Asymmetric Mn–O Motifs Boost Oxygen Activation for Upgrading Polystyrene to Aromatic Oxygenates 1.00
Green Upcycling Strategy for Spent Lithium-Ion Batteries: One-Step Coupling of Fluoridation Inhibition and Lattice Stabilization 1.00
Unveiling Swift Heavy Ion Track Morphology in Sr-Based High-Entropy Perovskites 0.06
Adsorption-Mediated Interfacial Engineering for Direct Regeneration of Spent LiFePO4 Cathodes 1.00
Transforming Retired LiFePO4 Material toward High-Performance Cathodes for Sodium-Ion Batteries via Intermediate Phase-Guided Reconstruction 1.00
Rapid Selective Recycling of Spent LiFePO4 Cathodes via a Deep Eutectic Solvent-Assisted Carbothermal Shock Method 0.40
Structure-Selective Regeneration of Heterogeneously Degraded LiFePO4 via Spontaneous Lithiation and Defect Reconstruction 1.00
14 13.22
Upcycling Waste Polyethylene Into Ultra-High Thermal Conductivity Composites Through Interface Engineering and Shear-Induced Orientation 1.00
Balancing Leaching and Relithiation in Deep Eutectic Solvents for Sustainable LiFePO4 Regeneration 1.00
Recycling Spent LiFePO4 Batteries for Fabricating LiI·3H2O and Li2CO3 via Iodine Targeted and Mild Redox 1.00
Stabilizing Spent LiCoO2 Through Interface Construction: A Sustainable Route to High-Performance Cathode Regeneration 1.00
Targeted Etching of Heterogeneous Phases and Crystal-Induced Regrowth for Direct Single-Crystal Regeneration of Spent Cathode Materials 1.00
Upcycling of Disposable Face Masks into Water‐Resistant and Flame Retardant Foams 0.25
Revealing the Atomic-Scale Evolution of Ni-Ions and NiO6 Octahedrons for Regenerating Spent Ni-Rich Cathodes 1.00
The Alchemy of Two Degraded Cathodes: Synergistic Surface-Bulk Upcycling for Degraded NCM Materials by Leached LiFePO4 1.00
Au Single-Atom Anchored TiO2 Nanotube Array Membrane for Photoelectrocatalytic Accurate Removal of Mercaptan Contaminants Under Continuous-Flow Conditions 1.00
Sustainable Revival of Spent Ni‐Rich Cathodes: High‐Temperature Endurance and Accelerated Kinetics via Strategic Upcycling 1.00
Regulated Li+/H+ Co-Insertion of Upcycled LiMn2O4 Cathode with Li/Mn Disorder for High-Voltage Aqueous Zn-Based Batteries 1.00
Novel Upcycling of Mixed Spent Cathodes Toward High Energy Density LiMnxFe1−XPO4 Cathode Material 1.00
Efficient Regeneration of Spent Lithium Iron Phosphate Cathodes Materials via Oxidation-Reduction for Industrial-Scale Recycling 1.00
N-Doped Carbon Layer Construction and Targeted Defect Repair Enables Direct Regeneration of Spent LiFePO4 Cathodes 0.97
11 10.60
All-Dry and Scalable Direct Recycling of Spent Ternary Black Mass Toward Long-Life Ah‑Level Pouch Cell 1.00
Efficient Direct Recycling Strategy of Spent LiFePO4 Cathodes by Structural Defect Repair and Interface Construction 1.00
Regeneration of Single‐Crystal with Repaired of the (003) Crystal Plane from Degraded Polycrystalline Ternary Cathode 1.00
Engineering Heteroatomic Nanotraps in Vinyl-Benzazole COFs: Record Capacity and 99% Selectivity for Photocatalytic Gold Recovery From E-Waste 0.88
Upcycling Mixed Alloy Scraps via Liquid Metal Dealloying for Cross-Alloy Circular Economy 0.75
Effective Ionic Potential Guided Dual-Gradient Structural Engineering for Spent LiCoO2 Upcycling 1.00
Direct Construction of a LiF-Rich Interphase for Sustainable Regeneration of Spent Graphite Electrodes via In Situ Decarbonization-Fluorination Strategy 1.00
Largely Enhanced Photocatalysis Process by Contact‐Electro‐Catalysis for Efficient and Eco‐Friendly Recovery of Gold 0.98
Integrating High-Efficient Delamination and Structural Reconstruction Boosting Direct Regeneration of Spent Cathode Materials 1.00
Chloroaluminate Molten Salts for Low‐Temperature Electrochemical Recycling of Layered Metal Oxide Cathodes 1.00
Unraveling and Modulating the Competitive Dynamics in Direct Regeneration of Ni‐Rich Cathode Material 1.00
16 15.38
Constructing Robust Cl‐Bridge for Ultrafast Leaching of Spent Cathodes in 180 s 1.00
Molecularly Tailored Dual-Function Deep Eutectic Solvent Enhances Spent Lithium-Ion Battery Cathode Delamination and Regeneration 1.00
Surface Segregation-Assisted Direct Regeneration of Spent Layer Cathodes 1.00
Upcycling Spent Lithium Iron Phosphate Battery Into Fe-CN3P Single Atom Catalyst for Environmental Remediation 0.71
Achieving Stable and Fast Ion Transport in Regenerated LiFePO4 Via Vacancy-Mediated Upcycling 0.83
Light‐Promoted Efficient Gold Recovery Enabled by a Polydopamine‐Functionalized Covalent Organic Framework 1.00
Solar‐Biohybrid Upcycling of Polylactic Acid Plastics to Alanine 0.83
H+/OH− Switchable Coordination Chemistry Enables Sustainable and Selective Critical Metal Recovery from Spent Li-Ion Batteries 1.00
Green Recovery of Precious Metals from E-waste via Autocatalytic Leaching 1.00
The Weakened Super‐Exchange Interaction Realizes the Direct Regeneration of Spent Lithium‐lon Battery Cathodes 1.00
One‐Step Silver Leaching from Manganese–Silver Ore Enabled by Hydrogen‐Bonded Network Formation 1.00
Lithium‐Mediated Hydrochloric Acid Dissolution: Enabling Clean and Efficient Recovery of Palladium from Spent Catalysts by Electrodeposition 1.00
Synergistic Co-Recycling: Selective Oxidation of Polyethylene to Dicarboxylic Acids over Spent LiCoO2 Cathodes 1.00
Redox-Mediated Lithium Recovery From Spent LiFePO4 Stabilizes Ferricyanide Catholyte for Durable Zinc-Ferricyanide Flow Batteries 1.00
Ionic Liquid‐Mediated Oxidative Degradation of Polycaprolactone into Adipic Acids over Pt/TiOsub2/sub in Water 1.00
Leveraging Solvent Effects for Enhanced Oxidation and Coordination in Selective Piezocatalytic Gold Recovery from End‐of‐Life Electronics 1.00
3 2.65
Mechanical activation-assisted technology for recovering valuable metal elements from spent lithium-ion batteries: A review 0.81
Unlocking the value of retired EV batteries: Technologies, application, and commercial models for second-life energy storage in power systems 0.83
Potential solution to wheat straw-to-methanol for marine fuel under carbon emission restrictions: A comparative energy, exergy, economic, and environmental analysis 1.00
2 2.00
Facile and efficient regeneration of LiFePO4 battery cathode using a multifunctional lithium source 1.00
Quantifying electrokinetic recovery of rare earth elements via electric charge modeling 1.00
6 5.80
A hollow sandwich heterostructure with an engineered crystalline–amorphous phase boundary for boosted electrocatalytic plastic upcycling 1.00
Regeneration of LiFePO4 from spent lithium-ion battery recycling wastewater via Fenton oxidation-selective precipitation 1.00
Selective lithium extraction and Fe–P component reconstruction toward high-performance Nasub4/subFesub3/sub(POsub4/sub)sub2/subPsub2/subOsub7/sub as cathode materials of sodium ion batteries 1.00
Rapid room-temperature repair of spent lithium iron phosphate via redox mediators 1.00
Full recovery of lithium salts and transition metal oxides from spent ternary cathode lithium-ion batteries 1.00
Acid-free photocatalytic recovery of valuable metals from spent ternary lithium battery cathode materials using acetonitrile and dichloromethane 0.80
2 2.00
Recyclable RAFT-3D printing 1.00
High-efficiency enzymatic biodegradation of polypropylene-based melt-blown fabric debris 1.00
1 1.00
Towards a new theoretical approach for disentangling illegal construction waste disposal: A Hong Kong study 1.00
17 16.43
NO emission and heavy metal risk assessment during co-combustion of lean coal and sludge-derived biochar 1.00
Environmental synergies and trade-offs in low-carbon transition of power sector: A life cycle assessment of various power generation technologies in China 1.00
Analysis of carbon emission trends and mitigation benefits throughout the residential building lifecycle: A case study of Jiangxi Province 1.00
Establishment of Environmental Pollution Accounting and Compensation Standards for Manufacturing Enterprises 1.00
Evaluation the environmental carrying capacity of lithium-ion battery recycling using emergy analysis 0.89
Integration of sludge combustion with treatment of hot blast furnace slags: pollution control and adding heating value 1.00
Integrated design for ethylene glycol production based on plasma gasification and water electrolysis: Thermodynamic and economic analysis 1.00
A bi-level optimization model of integrated energy system considering waste treatment under uncertainty 1.00
Life cycle assessment of the pumped hydro energy storage system in China 1.00
Research on combustion characteristics and parameter optimization of a 500 t/d municipal solid waste incinerator 1.00
Transforming discarded graphite into high-performance lithium-ion battery anodes: A green recycling and high-value utilization strategy for spent carbon cathode 1.00
A co-gasification strategy of residual municipal solid waste and biomass for electricity generation optimization and carbon reduction 0.67
Comparative Analysis of Environmental and Economic Assessment of Batteries for Stationary Applications 1.00
Low-temperature microwave co-pyrolysis of medical waste and walnut shells: effective regulation of organic chlorine to inorganic chlorine conversion in pyrolyzed char 1.00
Bi-level Optimization and Sustainability Assessment of Data Center Integrated Energy System Based on Emergy Theory 1.00
Emergy Evaluation of the Tea-Shiitake Project in the Mountainous Region of Central China 0.88
Comprehensive analysis of life cycle energy consumption and environmental impact of hydrogen production process via plasma co-gasification of coal and biomass 1.00
3 2.07
Boosting tenfold recycling profit by a one-step calcination strategy for upcycling spent LiCoO2 to high-value Li6CoO4 1.00
Hydration equilibrium-controlled cation–anion coordination competition for precise recovery of all valuable metals from spent lithium-ion batteries 1.00
Upcycling spent medium-Ni cathodes via novel liquified salt sourcing 0.07
6 6.00
Influences of Future Anthropogenic Emission Changes in China on Atmospheric Nitrogen Deposition in the Northwestern Pacific 1.00
Facet and crystallinity-dependent transformation of lepidocrocite impacts cadmium redistribution 1.00
Low-Molecular-Weight Organic Acids Constraints on the Divergent Weathering and Lead Mobilization of Sulfidic Minerals 1.00
Distinguishing the contributions of organic matter and iron (oxyhydr)oxides to zinc availability in paddy soils surrounding lead-zinc mines 1.00
Synergistically promoting humification and polluting gas reduction in cherry tomato straw composting via carbon bioavailability management 1.00
Carbonation Impact on the Stabilization of Heavy Metals in Carbon-rich Geopolymers Based on Gasification Slag and Fly Ash 1.00
33 32.41
Microbial Community Succession in Response to In-situ Coordinated Leaching of Ion-adsorption Rare Earth Ores 1.00
Microbial necromass accelerates humic acid formation by reshaping DOM transformation pathways during composting 0.91
Synergistic removal of As, Cd, and Pb from soil using composite eluent of Oxalic Acid and Tetrasodium Salt of N,N-bis(Carboxymethyl)-L-Glutamic Acid 1.00
Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties 1.00
Employing L-cysteine-mediated modulation for nickel biorecovery: Bioseparation-photocatalytic upcycling from wastewater 1.00
Utilization of waste sludge-derived biochar in sustainable planting ecological concrete: Integrating structural, ecological, and environmental benefits 1.00
Amoxicillin and copper affect humification during compost: Insight into dissolved organic matter and bacterial community succession 1.00
Comparative durability of NaOH-activated and Na2SiO3-activated geopolymer for Pb solidification/stabilization under chemical attack 1.00
Thermophilic keystone taxa drive humification in coal gangue co-composting via shikimate-pathway carbon flux 1.00
Enhanced removal of Pb (II) and sulfate by immobilizing acid-tolerant sulfate-reducing bacteria on magnetic chitosan 1.00
Experimental Study on Degradation Characteristics of Domestic-source Contaminated Soil Based on Mechanical Properties and Organic Components 1.00
Self-sacrificial template anchoring strategy for the preparation of highly dispersed metal site catalysts for efficient degradation of tetracycline hydrochloride 1.00
Dual benefits of indirect mineral carbonation of titanium gypsum: waste gypsum recycling and carbon sequestration 1.00
Modified biochar mitigates nitrogen loss in distilled grain waste composting by modulating microbial community assembly and function 1.00
Subsoil incorporation of vegetable waste reduced odor emissions and promoted nutrient recovery 1.00
Importance of inorganics in waste papers in regulating pore structures of resulting activated carbon for efficient removal of phenol and tetracycline 1.00
Life cycle assessment of wood plastic decking manufacturing: Reduction of environmental impacts based on an industrial case study in China 0.89
High temperature and humification reduce DNA viruses in food waste composting 1.00
Elucidating the clay-mediated fixation mechanism of humic acids in composting systems using LC-MS and spectroscopic techniques 1.00
Bacterial resource allocation strategies to reduce CO2 emission and enhance carbon conversion by exogenous additives in chicken manure composting 1.00
Atmospheric microplastic emissions from organic waste composting: Field-based assessment and exposure implications 1.00
Amorphous phase-engineered Cr-based coordination polymers for efficient gold recovery in highly acidic environments 1.00
Optimized preparation of dredged sediment-based functional ceramsite: thermodynamic profiling and formation mechanism 1.00
A novel approach based on PEM electrolysis technology for iron recovery from acid mine drainage: performance and mechanism 0.75
Novel Thermal Modification of Phosphate Tailings for Enhanced Heavy Metals Immobilization in Soil 0.86
Life Cycle Environmental and Economic Assessment of Co-combustion Strategies for Raw and Landfilled Municipal Solid Waste 1.00
Upcycling waste polyimide foam into efficient adsorbent for deep removal of nickel complex from wastewater 1.00
Greenhouse gas emissions in a microbial fuel cell-assisted composting system: Microbial insights into bacterial structures and genetic functions 1.00
Comparison of Phosphorus Transformation and Microbial Functional Potential in Aerobic and Facultative Composting of Livestock and Poultry Manure 1.00
Refined Bifunctional Deep Eutectic Solvent for One-Step Selective Indium and Tin Recovery from Spent LCDs 1.00
Extended thermophilic phase promotes fungal-bacterial collaboration to facilitate humification in batch-fed composting 1.00
An investigation of the engineering properties and environmental impact of low-temperature modified electrolytic manganese residue for karst grouting materials 1.00
Red mud-based magnetic biochar composite as a peroxydisulfate activator for tetracycline degradation 1.00
28 23.81
Selective and Sustainable Recovery of High-Value Metals from e-Waste via a Glucose-Mediated Hydrothermal Process 1.00
Shaping China’s Automotive Lithium-Ion Battery Recycling System to Meet the Retirement Wave: Insights from Integrated Modeling 0.44
Green and Facile Recovery of Silver and Aluminum from Waste Photovoltaic Modules: A Novel Mechanochemically Driven Pathway 1.00
Filterable and Condensable Particulate Nitrate Emissions from Plumes over North China 1.00
Insights into Extracellular Respiration Interfaces: Linking Molecular Redox Sites to Humic-Reducing Microorganisms in Biowaste Compost 1.00
Photochemical ROS-Driven Autocatalytic Transformation of Heavy Metal–Xanthate Complex Pollutants in Tailings Pond 1.00
Strategies for Improving Carbon Emission Efficiency of Municipal Solid Waste Management System in Western China: A Transition toward Environmental Equity 1.00
Role Transformation of Incineration Plants in Carbon Emissions from Municipal Solid Waste Treatment after Source Classification 1.00
Mechanistic Divergence of Perrhenate Reduction by Mackinawite through Coprecipitation and Adsorption 0.25
Real-World Life-Cycle Assessment of Industrial-Scale Lithium-Ion-Battery Hydrometallurgical Recycling 0.75
Recovery of Silver from End-of-Life Silicon Solar Panels via an Oxidative-Coordination Synergistic Approach 1.00
Global Soil Nitrous Acid (HONO) Emission Has Aggravated PM2.5 Pollution and Health Risks over the Last Century 1.00
Inversion Approach for Inferring Mixing State and Improving Optical Estimation of Coated Black Carbon Using Bulk-Volume Variables and Number-Size Distributions 0.92
Upcycling Waste Etchant into a Doped-Cu2O Electrocatalyst for Efficient Acetoxime Synthesis from Nitrate and Acetone 0.89
Beyond Tires: 45 Years of Rubber Flows and Stocks in China (1978–2022) 0.89
Dissolution Behavior of Lithium-Ion Battery Cathode Materials in Aquatic Systems: Key Drivers and Molecular Mechanisms 1.00
Geochemical and Isotopic Fingerprint-Based Identification of Sulfate Source Regional Characteristics and Evolution of Groundwater Impacted by Acid Mine Drainage (AMD) from a Nonferrous Metal Mining Area 1.00
Spatiotemporal Characteristics of Global Building Material Intensity Revealed for Circular and Low-Carbon Construction 0.67
Three-in-One Self-Sacrifice Mechanism Driving Green and Universal Critical Metals Leaching from Spent Lithium-Ion Batteries 1.00
Unlocking Synergies: Climate Mitigation, Clean Air, and Health Benefits of Sustainable Bioenergy in China 0.67
Unveiling the HONO Offsetting Effect: Rethinking NOx Emission Controls during Urban Ozone Pollution Episodes 1.00
Toward a Sustainable Future: A Holistic Environmental, Social, and Economic Assessment of Industrial Recycling for All-Solid-State Batteries with Oxide-Based Electrolytes 0.20
SemaNet: Bridging Words and Numbers for Predicting Missing Environmental Data in Life Cycle Assessment 0.29
Mapping the Recycling Potential of Bottom Ashes from Waste-to-Energy Plants toward Circular Economy: Evidence from China 1.00
Aerosol Uptake Coefficients of Isoprene Epoxides: Determination and Parameter Estimation from Online Field Measurements of Organic Molecular Markers 0.86
Harnessing a Genetically Engineered Self-Assembling Protein Biosorbent for Efficient and Selective Rare Earth Element Recovery 1.00
Closed-loop Lithium Recovery from Ternary Lithium-Ion Batteries: Dual Utilization of Waste Materials 1.00
Mechanochemical Ball Milling Achieves Green and Ultrahighly Efficient Recycling of Lithium-Ion Batteries 1.00
5 5.00
Sustainable Gold Mining from E-Waste: Robust Hollow Magnetic Gold Catchers with High Selectivity and Recyclability 1.00
Electrochemical Kinetics and Selective Separation Mechanism of Erbium and Europium on a Liquid Zinc Cathode 1.00
Dual Synergistic/Antagonistic Mechanism of Protonated-Amino Bidentate Ligand for Selective Separation of Nickel and Cobalt under High Acidity 1.00
Recycling of Valuable Metals from Low-Grade Nickel Sulfide Ores by Preroasting Followed by Chlorination with FeCl3·6H2O: Thermodynamics, Kinetics, and Process Intensification 1.00
Unlocking Strategic Metals from Zinc Smelting Dust: Ultrasound-ClOsub2/sub Synergy and Atomic-Scale Leaching Mechanisms 1.00
71 68.13
Enhanced bioremediation performance of Mn(Ⅱ) contamination in acidic wastewater by immobilized composite fungi on biochar 1.00
Unlocking circularity in rural waste management in northwest China: A systematic framework to quantify energy-environment-pollution nexus 1.00
Life cycle assessment of carbonated recycled concrete fine products 0.82
Enhanced chalcopyrite bioleaching performance through CO2-driven process intensification 1.00
Selective separation of bismuth from high-acid copper electrolytes: design of highly stable antimony-based adsorbent and investigation of strong adsorption mechanisms 1.00
Challenges of bismuth interference to copper-arsenic separation during electrolytic purification 1.00
Regionally differentiated sustainability trade-offs between primary and secondary resource production routes for LIB cathode materials in China 1.00
Recovery of Fe, Pb, and Zn from jarosite residues and realization of clean production through reduction roasting–grinding magnetic separation–tailings backfilling: effects, mechanisms, and applications 1.00
A green bio-cementation strategy based on microbially induced carbonate precipitation for preventing leachate leakage during the in-situ leaching of ionic rare earth ores 1.00
Co-extraction and stepwise purification of germanium and chlorine from zinc oxide leaching solution 1.00
Twin thermal desorption strategies for contaminated soil: A process-based life cycle analysis for greenhouse gas mitigation 1.00
Enhanced immobilization of heavy metals in cement using functionalized chitosan: Leaching reduction and performance improvement 1.00
Process parameter optimization for greenhouse gas mitigation during green-waste composting and mechanistic insights from microbe–environment networks in treatments with contrasting outcomes 1.00
Integrated environmental and economic efficiency assessment of lithium extraction processes in China: An LCA-TCM-DEA framework 1.00
Efficient recovery of high-purity 2D flaky R-FePO4 from lithium extraction slag leachate via solvent extraction and chemical precipitation 1.00
Mechanism of efficient selective separation and purification of Cu, In, and Ga in the deep eutectic solvents system 1.00
Biochar-mediated regulation of gaseous emissions and microbial community during the whole vermicomposting process 0.90
Characteristics and techno-economic analysis of nickel-cobalt-manganese composite oxides produced by the flame synthesis method 1.00
UCO provides greater carbon reduction potential than plant oils across diverse biodiesel production technologies 1.00
An integrated framework for synergistic multi-element, cross-media pollution control in organic solid waste treatment system 1.00
Carbon footprints of recycling straw waste into building materials: A life cycle assessment (LCA) study 0.80
Impacts of iron additives on enzymatic activities and nitrogen cycling during composting: Microbial and biochemical insights 0.95
Hour-level humification of papermaking waste residue to produce honeycomb-like controlled-release fertilizer 1.00
Interpretable machine learning enables mechanistic insights and predictive control for clean and sustainable copper electrorefining 1.00
Ultrafast and selective recovery of lithium from spent cathodes via flash Joule heating-driven chlorination 1.00
Efficient extraction of valuable metals and preparation of FePO4·2H2O from lateritic nickel ore via clean magnetizing roasting-selective leaching process 1.00
Intelligent control of food waste composting based on PID and LSTM: analysis and comparison of strategies 1.00
Multi-dimensional sustainability assessment of 2-ethylhexanoic acid production pathways: Integrating techno-economic analysis with planetary boundaries framework for butyraldehyde and isooctanol processes 1.00
Study on mix ratio optimization, microstructure evolution, and economic benefits of iron tailings-fly ash-limestone powder ternary geopolymer 1.00
Hydrothermal carbon-based sulfate-reducing bioagent for enhanced sulfate reduction and acidification mitigation in oligotrophic environments 1.00
One-step treatment of hydrometallurgical wastewater of photovoltaic laminates with ferrite process under weak alkali conditions: Regulation, precipitation characteristics, and mechanism 1.00
Turning NH3 liability into humus asset: In-situ microbial engineering as a priority approach to compost gas management 1.00
Sustainable utilization of red mud and coal gasification fine slag for iron recovery and cementitious material preparation 1.00
Multi-objective optimization of crop distribution in arid agriculture: From water-carbon-food nexus perspective 1.00
Cradle-to-gate assessment and optimization of sustainable geopolymer concrete 0.33
The positive effects of refluxing thermophilic compost materials on composting at low temperatures: insight into the large-scale composting experiments 1.00
Application strategies of cathode materials in retired lithium battery in cascade biomass pyrolysis and reforming for hydrogen production 1.00
Life cycle assessment of embodied carbon from buildings’ demolition waste management systems in Hong Kong 1.00
Germanium enrichment from lignite via selective ashing of germanium-bound humic acid followed by water-washing desalination 1.00
Wastepaper cellulose could replace polyester fibre and packaging films to avoid 270 Mt CO2ea−1 0.33
A green and efficient process for extracting lithium from the clay-type lithium ore 1.00
Material flows, stocks, and environmental emissions of 11 plastic additives in China from 1958 to 2060 0.86
Multi-scale cross-media modeling of ammonia emissions in membrane-covered aerobic composting of dairy cow manure and wheat straw 1.00
Colloid mediated redistribution of metal species during alkaline regulation of bauxite residue: pH-dependent mobilization-immobilization dualities 1.00
Research of the enhanced separation behavior of radioactive wastewater in microchannels 1.00
Fe synergistic redox Cu(II)-As(V)-H2SO3 in copper smelting dirty acid wastewater: Kinetic-Thermodynamic mechanism and technical feasibility 1.00
Assessment of construction spoil generation: A case study in China 0.83
Chaotic circuit-enhanced electrokinetic leaching of ionic rare earth ores with (NH4)2SO4-MgSO4 compound salt 1.00
Intelligent prediction of food waste compost maturity using machine learning based on rapid detection process metrics 1.00
Effects of iron on greenhouse gases and ammonia emissions and related genes in swine manure composting 1.00
Citric acid as a green rejuvenator: mechanistic insights into the complete recovery of floatability for oxidized arsenopyrite 1.00
Selective platinum recovery from Pt-Co solutions via amine/phosphine oxide-loaded solvent-impregnated resins: mechanisms and selectivity 1.00
From stainless steel to batteries: industrial-scale closed-loop hydrometallurgical integration for ferronickel-to-precursor conversion 1.00
Multi-model fusion for evaluating carbon emissions in China's provincial sheep production and developing precise reduction strategies 0.83
Unlocking the recycling potential of dysprosium for balancing supply and demand across Chinese provinces 1.00
Urban-industrial synergies in Sustainability: Evaluating the Co-processing of MSWI fly ash in industrial kilns from environmental and economic perspectives 1.00
Synergistic infrared Co-pyrolysis for integrated resource Recovery: Gas-Induced metal extraction from spent lithium-ion batteries and bio-oil upgrading 0.92
Recovering copper as high-purity CuO nanoflowers from the acidic waste etchant via selective Fe and As removal and reactive crystallization 1.00
Co-production of high-quality syngas and valuable elements: combination of chemical looping gasification and acid leaching to cleanly dispose red mud solid waste 1.00
Mechanistic study on the swelling/solubilization behavior of EVA by NMP and BDG for efficient recycling of PV modules 1.00
Efficient physical extraction of Al from Li-ion battery Al dross using vacuum melting-vibration screening 1.00
Magnetic immobilized laccase drives oxidative coupling for simultaneous removal and detoxification of flotation reagent 1-nitroso-2-naphthol in mineral processing wastewater 0.80
Assessment of environmental impacts of green waste resource utilization in Beijing Tongzhou urban subcenter under multi-scenario simulation 1.00
Comparison of life-cycle environmental impacts of onshore and offshore wind farms during the southward movement of wind power development in China 1.00
From mining to recycling: Identifying carbon mitigation pathways across the full life cycle of China's lithium-ion battery industry 1.00
Chalcocite-catalyzed Fenton coupling with biodegradation for N,N-dimethylformamide treatment: insights into mechanism and cost-effectiveness 0.75
Progressive prediction of embodied carbon emissions across stages of schematic design with machine learning 1.00
Decarbonization pathways for the plastic packaging industry: Revealing the synergistic mechanism of plastic lifecycle management 1.00
Evaluation of slag and tannery sludge based geopolymer after thermal exposure: Properties, phase transformation and Cr leaching behavior 1.00
High-Efficiency Recovery of FePO4 from Lithium Extraction Slag via SO2 Reductive Leaching and Selective Precipitation 1.00
Staged pyrolysis of medical waste for high-value product generation: Impact of inter-component interactions on chlorine migration and light compounds formation 1.00
1 0.08
Non‐Negligible Uptake of Nitrous Acid in Present‐Day Clouds 0.08
3 3.00
Aromatic Ketone-Mediated Two-Electron Lithiation for Rapid and Room-Temperature Regeneration of Spent LiFePO4 Cathodes 1.00
Hydrogen-Based Reduction Boosts Sustainable Iron Production from Red Mud 1.00
Atmospheric Corrosion-Driven Redox Coordination Enables Spontaneous Carbonate Conversion of Lithium-Ion Battery Cathodes 1.00
2 2.00
On-Demand Recycling of Polylactic Acid–Based Blends into Upgraded Materials with Customizable Compositions 1.00
Upcycling Waste Polypropylene into Multifunctional Homogeneous Additives for Simultaneously Enhanced Mechanical Performance and Processability 1.00
1 1.00
Paper-Mill Waste Derived Bioplastic with Excitation- and Time-Dependent Phosphorescence Color for Sustainable Flexible Anti-Counterfeiting 1.00
1 0.96
Building material stock drives embodied carbon emissions and risks future climate goals in China 0.96
12 11.11
Oxidation-reconstructed Li+ transport enables high-tap-density single-crystal regeneration of spent LiNi0.5Co0.2Mn0.3O2 positive electrodes 0.93
Maximizing energy utilization and lithium leaching efficiency via sequential electrochemical dual-oxidation and soaking-relaxation 1.00
Efficiency hierarchy and optimization of waste incineration in China to balance disposal and energy supply 0.91
Microwave-alkali co-activated persulfate enables minute-scale fertilization of food waste with high fulvic-like acid yield 1.00
A three-in-one strategy for lithium recovery and upcycling of spent cathode materials 1.00
Flash upcycling of spent LiCoO into oxygen-suppressed lithium-replenishing agent for high-performance batteries 1.00
Lithium-ion battery recycling through an integrated electro-membrane crystallization technology 0.41
Fractionated degradation and valorization of polypropylene waste into sulfonate surfactants 1.00
Efficient recycling of spent Li-ion battery cathodes by laser-induced high-temperature thermal shock 1.00
Extraction of valuable metals from acid mine drainage by an electrochemically activated limestone system 1.00
Lithium-ion battery recycling relieves the threat to material scarcity amid China’s electric vehicle ambitions 0.86
An acid-free process to prepare battery grade nickel and cobalt sulfates from complex resources 1.00
3 2.50
A water-soluble binder for recyclable lithium-ion batteries 1.00
Component self-assembly for reciprocal urban mining 1.00
Expediting co-benefits of tailored municipal solid waste management strategies globally 0.50
1 1.00
Electroextraction of low-concentration redox-active heavy metals with Eθ < 0 V from acid mine drainage 1.00
1 0.05
Selective cobalt and nickel separation by bioacid-mediated electrowinning 0.05
3 2.80
Mapping Cement Stock and Flow at the Chinese city level 1.00
An Innovative Method for Rapid Estimation and Optimization of Building Embodied Carbon Emissions 1.00
Developing effective intervention strategies to improve public participation in household waste recycling program: A data-driven agent-based behavior analysis approach 0.80
18 17.91
Rare Earth-Derived Conductive Zeolite Electrodes Empower NH4+ Recovery from Mining Wastewater via FCDI and Their Application as Ammonia Release Fertilizer 1.00
Electrocoagulation for the Simultaneous Removal of Copper and Arsenic from Acid Mine Drainage: Performance and Mechanisms 1.00
Sulfur Recovery from Spent Caustic Streams: Enabling Selective Transformation via Tandem Electrochemical–Chemical Strategy 1.00
Leaching Behavior and Toxicity of Solid Waste from Ore-Based Lithium Extraction: Implications for Safe Storage and Resource Utilization 1.00
Greenhouse gas emissions from black soldier fly composting of silver and silver sulfide nanoparticle-enriched sludge 1.00
Simultaneous Sulfur Black 1 dye removal and Na2S recovery via a sulfur-circular process: Advancing closed-loop textile wastewater treatment 1.00
Highly efficient Au recovery from acidic E-waste leachate using electrochemical nickel membrane reactor 1.00
Pilot-Scale Recovery of High-purity Li2CO3 and FePO4 from Real Wastewater for Sustainable Full Synthesis of LiFePO4 Battery 1.00
Self-Driven Electrochemical Separation-Recovery System for Simultaneous Recovery of Copper, Phosphate and EDTA from Electroless Plating Wastewater 1.00
Sustainable Production of High-Purity Crystalline FePO4 from Sludge for Battery Electrodes 0.91
Ultrasonic-induced water-oil interface of microdroplets: A selective and rapid green approach for gold recovery from e-waste 1.00
Sustainable electro-enrichment recovery of valuable metals from typical bulk tailings 1.00
Biogenic Cu2-xSe nanoparticles with vacancy engineering quickly upcycle cobalt from wastewater for photothermal antibacterial and desalination 1.00
Enhanced recovery of rare earth elements from mine wastewater using microbial-derived ferrous sulfide 1.00
Efficient decomplexation of Cu(II) complexes and Cu(II) recovery via one-step Fenton-like oxidation/adsorption processes mediated by nanoconfined hydrous Co-Zr oxides 1.00
Sulfidation methods determine longevity and performance of zerovalent iron: Mechanistic insights into trichloroethylene removal and aging resistance 1.00
Electrochemical decomplexation of Cu(II)-citrate and copper recovery via peroxymonosulfate activation with N,O co-doped carbon felt cathode 1.00
Photovoltaic driven carrier-facilitated membrane process enables efficient and low-carbon recovery of spent lithium ion batteries 1.00

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.