Fluid Mechanics and Thermal Engineering articles for Poland

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 15

Article ‘Count’ for Fluid Mechanics and Thermal Engineering.

Journal Count Share
10 7.90
Insights into the impact of polluted moist air on transonic condensation flow to enhance compressor performance: experimental and numerical investigation 0.43
A new technique for measuring the fluid transient temperature 1.00
Numerical study on the effect of heterogeneous condensation in the primary nozzle on condensation flow and performance of steam ejector 0.20
Using domestic drain water as affordable and clean energy: predictive modeling and sensitivity analysis of a horizontal heat exchanger 1.00
Development of an OpenFOAM non-equilibrium condensation model for flow loss and performance prediction in steam transonic flows 0.27
Cavitation and runaway experimental research of a very high specific speed low-head model Francis turbine – A case study with emphasis on flow analysis in the draft tube 1.00
Entropy generation and exergy destruction in transient and compressible steam flow through ISA 1932 measuring nozzle 1.00
Online determination of the heat transfer coefficient at the inner surface of a cylindrical component in a thermal stress monitoring system for critical boiler pressure components 1.00
Analysis of heat transfer in a cylinder being treated in a gas nitriding furnace using a new inverse problem solving method 1.00
Transient modelling of heat exchangers using a steady-state model for low heat capacity media 1.00
1 0.50
Effects of Dissolution Regimes on Flow Channelization and Solute Transport in 3D Fracture Networks: Insights From Graph‐Based Reactive Transport Modeling 0.50
1 1.00
A complex scalar field theory for charged fluids, superfluids, and fracton fluids 1.00
1 0.08
Nanopores with Ionic Memory in Oscillating Ion Current Signals 0.08
1 1.00
Application range of perfect spin hydrodynamics 1.00
1 0.10
Confined colloidal droplets dry to form circular mazes 0.10

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.