Mechanical Engineering articles for Huazhong University of Science and Technology (HUST), China

Time frame: 1 June 2025 - 30 May 2026
Count: 49

Article ‘Count’ for Mechanical Engineering.

Journal Count Share
3 2.29
Semiconductive MOF-Based Supercapacitor Diodes 1.00
Giant Electrostrain in Lead-Free BiFeO3–BaTiO3 Ceramics via High-Entropy Design 0.63
Broad-Temperature Electrocaloric Effect in Multilayered Ferroelectric Polymer Nanocomposites 0.67
5 2.24
Chloride-Tolerant Iridium Single-Atom Modulated Nickel Hydroxide for Industrial-Current-Density Seawater Electrolysis 0.12
Operando Monitoring of Stress Evolution in LiMnxFe1-xPO4 Cathodes: Deciphering the Origin of Abnormal Discharge Plateau 1.00
Orbital Engineering via D-p Hybridization by in Doping Enables High-Performance Lithium Manganese Iron Phosphate Cathodes 0.04
Solvent–Mediated Cathode Prelithiation for Durable, High‐Energy Lithium‐Ion Batteries 1.00
Dynamic Variation in Electric Field and Ksup+/sup Diffusion: A New Insight from Multi‐Heterostructure Evolution for Bisub2/subSsub3/sub/WSsub2/sub Potassium Ion Anode 0.08
5 1.07
Giant Specific Power Generation Capacity of Micro‐Thermoelectric Generators Enabled by High‐Entropy Cocktail Strategy 0.18
Nature‐Inspired MXene Electrode with the Highly Interconnected Gradient Nanoconfined Architecture 0.07
Dimensional Crossover Engineering in MoS2/Organic Superlattices Breaks the zT Barrier for 2D Thermoelectrics 0.13
Ultrasensitive Mechanoluminescence of Pr3+-Doped Perovskite Oxide for 3D Strain Sensing and Visualization 0.11
Morphotropic Phase Boundary in Irradiated Ferroelectric Polymers 0.58
3 0.33
Lead-Doping Enabled Band Engineering and Phonon Transport Modulation: Key to High-Performance Thermoelectric AgSbTe2 0.13
Sharpened Dirac Cone and Elevated Carrier Mobility in Bi4Te3 Engineered by a High [Bi2] Bilayer Content for Thermoelectrics 0.05
Hetero-Composition and Homo-Structure Decoupling Charge and Phonon Properties in p-Type Thermoelectric SnAgBiTeSe2 0.15
2 2.00
Recent progress of chemical looping technology for waste plastic conversion 1.00
Doubling the thermo-osmotic energy conversion efficiency through the reduction of heat and mass transfer resistance 1.00
2 1.07
Enhanced piezoelectricity and pyroelectricity in poly(vinylidene fluoride-co-tetrafluoroethylene) via hot pressing 0.57
Enhanced electrocaloric effect in relaxor ferroelectric polymers through hot press processing 0.50
1 0.83
Enhancing perovskite detector performance via bias-induced aging: a reproducible and universal approach 0.83
14 8.69
Boosting Biogas Chemical Looping Reforming via Transition Metal-Doped LaFeO3 Perovskites: Activity Promotion and Mechanistic Insights 0.20
Working salt solution screening for adsorption-based power and cooling cogeneration osmotic heat engines 1.00
Performance and Key Parameters of Brine-Compensated Salt Cavern Isobaric Compressed Air Energy Storage Systems 0.14
Photo-assisted chemical looping toluene reforming for improved hydrogen and syngas Co-production under mild conditions 0.88
Comprehensive analysis on heating performance characteristics of a photovoltaic-driven vapor injection variable refrigerant flow system 0.60
Performance and sensitivity analysis of a novel user-side CHP system integrating steam methane reforming and multi-stack LT-PEMFCs 0.50
Analysis and optimization of a novel two-phase spray injection heat pump suitable for extremely cold conditions 0.17
Thermodynamic, environmental, and economic analysis of a novel dual-mode ejector-enhanced CO2 cooling and heating system 1.00
A comprehensive analysis of novel environmentally friendly refrigerants in high-temperature heat pumps for industrial heating 0.93
Investigation into the switching mechanism of photovoltaic-thermal power heat pipe/heat pump composite cycle system in cogeneration mode 0.17
Synchronous bio-oil upgrading and CO2 fixation: Pulsed electrolysis enhancement strategy 1.00
Study on the hydrocarbon mixtures in high-temperature heat pump systems for industrial waste heat recovery 1.00
A-Site Engineering of Iron-Based Perovskites for Syngas Production via Biogas Chemical Looping Reforming 0.11
Study on Biomass Gasification and Natural Gas Integrated Chemical Looping Combustion Power System 1.00
1 0.20
A ternary-dielectric dual-domain triboelectric nanogenerator for high charge density and tail-charge suppression 0.20
2 0.38
Two-Lever Design Rule for High-Entropy Oxide Oxygen Carriers: Minimize Spin Polarization, Maximize Fe–O–Ni Covalency 0.17
Establishing the Field-Flow Competition Model to Decipher the Nonmonotonic Interfacial Li+ Dynamic Process for Stabilizing the High-Voltage Cathode–Electrolyte Interface 0.21
1 1.00
Enhanced Piezoelectricity in Stretched Relaxor Ferroelectric Polymers Near the Morphotropic Phase Boundary 1.00
1 0.22
2.5 V High-Energy Aqueous Lithium-Ion Hybrid Capacitors Using a Sodium Titanate Intercalation Anode and a Pseudocapacitive Manganese Dioxide Cathode 0.22
7 2.02
Engineered local polarization disorder unlocks record efficiency in antiferroelectric capacitors 0.12
Large piezoelectricity in crosslinked ferroelectric polymers 0.60
Room-temperature plasticity in Ag2Te induced by Ag ions hopping 0.01
A layered Prussian blue analogue as fast-charging negative electrode material for lithium-ion batteries 0.30
Multiscale-engineered ferroelectric ceramics exhibiting superior electrocaloric performance 0.20
Scalable solution-processed ferroelectric polymers exhibiting markedly enhanced piezoelectricity 0.40
Anomalous photoelectrochemical etching of undoped semiconductor surfaces 0.39
1 0.17
Boosting the Thermoelectric Performance of 𝛼-MgAgSb through Phase-Transition-Induced Self-Doping 0.17
1 1.00
In Situ NMR Investigations of Impacts of Electrolyte Additives on Lithium Metal Cycling in Anode-Free Lithium Metal Batteries 1.00

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.