Mechanical Engineering articles for Xi'an Jiaotong University (XJTU), China

Time frame: 1 June 2025 - 30 May 2026
Count: 85

Article ‘Count’ for Mechanical Engineering.

Journal Count Share
1 0.29
Achieving High-Yield Conversion of Janus Transition Metal Dichalcogenides on Diverse Substrates 0.29
5 2.59
Controlled Oxidation of MXene for Regulating Tribochemistry at Sliding Interfaces 0.71
Enhancement of Thermoelectric Performance in Mg3(Sb, Bi)2 via Dual Doping of Cations and Anions 0.31
Enhancing Sensitivity of Flexible Piezoelectric Thin‐Film Acoustic Sensors via Buffer Layer Engineering for Insulation Health Monitoring of Power Cables 0.82
High Piezoelectricity and Strong Field Endurance in Pb(Zr,Ti)O3-Rich Textured Ceramics 0.64
Ultrahigh Capacitive Energy Storage Through Phase and Entropy Engineering 0.11
3 0.56
Asymmetric Rolling‐Up Induced Strong Polarization Electric Field for Ultrahigh Areal Electrochemical Capacitance 0.17
Multi-Polar Order Engineering Enables Near-Ideal Efficiency in Lead-Free Energy Storage Perovskite 0.19
Gradient-Acceptor-Doping Breaks the Piezoelectric Trade-Off in Lead-Free (K, Na)NbO3 Ceramics 0.20
1 0.06
Constructing High‐Power N‐Type Thermocells via Fluoride‐Mediated Imidazole–Iodine Coordination 0.06
5 1.63
A carbon-negative solar fuel production method with enhanced solar contribution and superior CO2 reduction capacity: Experimental and system investigation 0.10
Design of a hemispherical reactor with radiation regulation for efficient solar thermochemical fuel production 0.07
Latching control of a point absorber wave energy converter in irregular wave environments coupling computational fluid dynamics and deep reinforcement learning 0.13
Optimal model-based electrochemical characteristics and thermal management of reversible solid oxide cells 1.00
An advanced moving-boundary method for the dynamic simulation of split heat pump system under start-up process 0.33
5 1.76
Improved electro-actuation performance of polyurethane-based dielectric elastomer under ultra-low electric fields via introducing soft functional filler 0.19
Synergistic phase regulation and heterojunction engineering achieve ultrahigh-energy density in ferroelectric polymers 0.13
High-energy density in dielectric film capacitors via interface engineering and polarization behavior regulation 0.82
Design of high-efficiency Ga2O3-based betavoltaic battery utilizing the MG-HJ-PND structure 0.20
Carrier–phonon decoupling via annealing enhances thermoelectric performance of Bi2(Te,Se)3 0.43
43 29.12
Design of rotating heat storage tank filled with unevenly spaced and angled fins: a novel optimization framework of multi-strategy improved sparrow search algorithm 1.00
Research on ionic liquid circulation method based on high-pressure common rail concept for ionic liquid hydrogen compressors and its impact on compressor energy efficiency 0.38
Multi-objective optimization and comprehensive performance analysis of a novel reverse absorption heat pump for blackwater waste heat recovery 0.07
Research on the hierarchical coordinated control method of Helium-Xenon Brayton cycle power generation system 1.00
Advanced exergy and exergoeconomic analyses of a novel low-temperature industrial waste driven combined power and hydrogen system 0.61
Experimental Study on the Operating Characteristics of High-Temperature Heat Pipe–Stirling Thermoelectric Conversion Systems 1.00
Experimental investigation on performance enhancement of an air source heat pump by using a novel vapor bypass approach 0.92
Thermodynamic analysis of a three-stage cascade reactor system with ejector-driven recirculation for supercritical water gasification 0.50
Thermodynamic, environmental, and economic analysis of an auto-thermal supercritical water gasification system of coal for synthesis gas cogeneration 1.00
Improving the exergy performance of the ionic liquid compression system for hydrogen storage by operating parameter optimisation 1.00
Energetic performance and driving range investigation of the CO2 indirect system with ejector used in vehicle thermal management 0.86
Integrated Performance Analysis and Prediction for a Tesla Turbine in Advanced Adiabatic Compressed Air Energy Storage Systems 0.86
Thermodynamic and exergoeconomic analysis and multi-objective optimization of a novel tank-free transcritical CO2 energy storage system 1.00
Particle swarm and multi-objective optimization algorithm for heat sink configuration of a two-stage precision thermoelectric refrigeration 0.88
Thermodynamic analysis and life cycle assessment of three hydrogen-based polygeneration systems for co-producing power and freshwater 0.14
Optimization of Dual-Organic Rankine Cycle for LNG wide temperature range cold energy utilization based on Genetic Algorithm 0.11
Proposal and optimization of novel heat pump cycles with the Tesla turbine as an expansion device 1.00
Multi-objective optimization of supercritical carbon dioxide Brayton cycles using Bayesian physics-informed neural networks: A comprehensive analysis of energy, exergy, economic, and environmental performance 0.14
Ionic thermoelectric osmotic energy conversion for harvesting low-grade waste heat from electronic heat sink 1.00
Synergistic Thermodynamic Analysis of Integrated Power-Water Cogeneration: Near-Isothermal Compression for Desalination and Energy Storage 0.78
Experimental investigation of Tesla turbine under different operating parameters and load conditions using air as working fluid 0.80
Aeroderivative gas turbine integrated with supercritical CO2 cycle for gas-to-power: Comprehensive assessment and optimization 0.50
Dynamic regulation strategy of the SCO2 Brayton cycle system based on PCM and its instability evaluation model 0.67
Experiment investigation of an ejector-enhanced regenerative refrigeration system with zeotropic mixture 0.56
An auto-thermal poly-generation hydrogen production system based on supercritical water gasification of oily wastewater: Thermodynamic and Environmental Analysis 1.00
Thermodynamic insight into the integration of supercritical water gasification and solid oxide fuel cells for waste plastic energy recovery 0.17
Energy, exergy and economic analysis of a dual-nozzle ejector-enhanced high-temperature heat pump cycle 1.00
Sustainable energy development goals of an organic waste biorefinery model for agriculture economies 0.20
Thermodynamic and safety analysis for hydrogen production in a supercritical water gasification system of coal by multi-oxidizers distribution 0.69
Performance enhancement of a vapor compression cycle with R32/R1234yf by using internal heat exchanger 1.00
Conventional and advanced exergy-exergoeconomic assessment of pumped thermal energy storage integration in enhanced thermally coupled methanol decomposition reaction 0.67
Study on the gasification mechanisms of key intermediates of oily sludge in supercritical water by ReaxFF-MD method 0.33
An intensive review of ORC-based pumped thermal energy storage 0.30
Thermodynamic, sensitivity analyses and optimization of a dual-stage diaphragm compressor system: A model-based and experimental study 0.75
Integrated liquid hydrogen production technology with cascade separation and waste heatamp;cooling energy utilization 1.00
Genetic algorithm based optimization design and coupling performance analysis of multi-stage series hydrogen turbo-expanders 0.78
Flow prediction model for multi-stage labyrinth regulating valve based on supercritical CO2 energy dissipation mechanism 1.00
Combining exsolution and photothermal chemistry for mid-temperature chemical looping dry reforming of methane 0.13
Multi-mode performance assessment of an innovative heat design structure for a geothermal plant using efficient heat recovery, producing power, cooling, hydrogen and freshwater 0.33
High-voltage bidirectional balancing structure and model predictive control for cell balancing of supercapacitors in heavy duty HEV applications 1.00
Enhanced Performance Evaluation and Operational Regulation of a Novel Combined Cooling and Power System Using Machine Learning 0.36
Experimental study on the performance of an auto-cascade refrigeration system integrating fractional condensation and flash separation 1.00
Enterprise-friendly demand response optimization in modern grid 0.67
5 3.63
Experimental analysis and system design of a novel autothermal moderate-temperature chemical looping hydrogen production process with steam enhancement 0.14
Green hydrogen-enhanced coal-based methanol-to-aromatics and olefins (MTA/MTO) system: conceptual design and parallel multi-objective optimization based on entropy-energy-economic (3E) analysis 0.80
Thermodynamic and economic analysis of aluminum-water reaction systems for power generation and energy storage 0.88
Thermodynamic, economic, and environmental analysis of a supercritical water partial oxidation autothermal cogeneration system of coal 1.00
Sustainable hydrogen production from coal tar residue via supercritical water gasification 0.81
1 0.10
Mechanistic Insights into Enhanced Capacity and Pure-Phase Formation in Fe-Based Mixed Phosphate Cathodes 0.10
1 0.31
A Critical Temperature–Pressure Window for Attaining a Giant Piezoelectric Voltage Coefficient in Poly(vinylidene fluoride) 0.31
10 3.54
Engineered local polarization disorder unlocks record efficiency in antiferroelectric capacitors 0.53
Textured piezoelectric ceramics with reduced grain size for high-frequency transducer applications 1.00
Giant photostriction rate for remote opto-ultrasonic structural health monitoring 0.35
Nanotwin architecture and ultra-high valley degeneracy lead to high thermoelectric performance in GeTe-based thermoelectric materials 0.25
Oxygen nanoclustering evades inverse Hall-Petch softening 0.17
Three-dimensional network of multi-fold twins enabled by geometrically necessary amorphous zones 0.25
Anomalous photoelectrochemical etching of undoped semiconductor surfaces 0.11
Boosting carrier mobility in MgAgSb via in-situ InSb nanoprecipitates for high-efficiency segmented thermoelectric module 0.20
Advanced stability and energy storage capacity in hierarchically engineered BiNaTiO-based multilayer capacitors 0.60
Local heterogeneous dipolar structures drive gigantic capacitive energy storage in antiferroelectric ceramics 0.08
1 0.39
Streaming flexoelectricity in saline ice 0.39
1 0.39
Flexoelectricity and surface ferroelectricity of water ice 0.39
1 0.60
Gigantic piezoelectricity in a polycrystalline ceramic actively maintained at a quadruple point 0.60
2 1.07
Frictional strength regulated by roughness alignment 0.85
Topological bubble domain engineering for high strain response 0.22

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.