Resources Engineering and Extractive Metallurgy articles for Taiyuan University of Technology (TYUT), China

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 18

Article ‘Count’ for Resources Engineering and Extractive Metallurgy.

Journal Count Share
10 7.90
Time-Dependent Deformation of Anthracite Coal under Gas-Solid Coupling Effects 1.00
Daily gas production prediction for a single CBM well using an integrated framework of temporal-multivariate dependency simultaneous modeling: A case study 0.87
Study on the effect and mechanism of surfactant synergistic with potassium formate on inhibiting coal spontaneous combustion 0.60
Numerical study on the effect of injection pressure on hot flue gas induced coal deformation and enhanced coalbed methane recovery 1.00
Feasibility and stability study of single-well retreating horizontal cavern gas storage in deep bedded salt rock of Liulin, China 0.83
Three-Dimensional Pore Structure Reconstruction of Heterogeneous Rocks Using DC-SRGAN: A Case Study on Pore Evolution in Oil Shale Under Thermal Stimulation 1.00
Experimental and molecular dynamics investigations on the effects of surfactant on the wettability of coal in acidic environment 0.10
Experimental and Numerical Simulation Study on the Influence Mechanism of Flue Gas Displacing Coalbed Methane under Stress Conditions 1.00
Study on the construction of 3D complex pore networks and the dynamic evolution of seepage pathways in oil shale during in-situ pyrolysis by convective heating 0.83
Performance and mechanism of plasma-charged droplet capture and wetting of coal dust: Macroscopic, Mesoscopic, and Microscopic Scales 0.67
3 1.71
Adsorption Mechanisms of Lead and Cadmium by Alteration Residues of Coal Slime-Based Activated Materials: Theory and Experiment 0.92
Insights into iron sulfide activated sulfite pretreatment for enhancing short-chain fatty acids production from sludge fermentation: Performance and mechanism 0.68
Composite dust suppression material of fish scale based chitosan intercalated MMT: synthesis process, performance parameters, and mechanism of action 0.11
4 2.61
Pre-curing time effect on carbon capacity and microscopic properties of paste backfill produced by alumina production solid wastes and its practical application 0.80
Unraveling polarity-dependent adsorption and charge transfer in charged droplet-dust interactions: Toward cleaner coal production 0.71
Control of backfill ratio in a short-wall green-intelligent mining working face to prevent pollution from coal-based solid waste: experimental and design studies on the relationship between two-dimensional images and volume of gangue 0.10
Effects of carbonaceous and ash synergism on the properties of coal mine solid waste filler materials: modulation of hydration mechanisms, strength generation mechanisms, and fine-scale damage 1.00
1 0.26
Adsorption-responsive bionic photothermal ion pump for reversible seawater lithium extraction 0.26

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.