Chemical Engineering articles for Zhejiang University (ZJU), China

Time frame: 1 June 2025 - 30 May 2026
Count: 257

Article ‘Count’ for Chemical Engineering.

Journal Count Share
7 4.09
Solvent-Enriched Separator–Electrolyte Interface Stabilizes 4.7 V Ni-Rich Layered Cathodes 0.40
Functionalized Separator with Integrated Mass Transfer Selectivity and Kinetics Regulation toward Durable Zn Anodes 0.91
Triple-Site Integrated Redox-Active Metal–Organic Cages Enable Complementary Acceleration Mechanisms for Serially Enhancing Sulfur Redox Kinetics 0.06
High-Performance Fenton-like Catalysis through Metal–Organic Framework-Derived Nanoporous Carbons for Continuous Cleavage of Polysaccharides 0.92
Ultraselective Amino–Phenolic Nanofiltration Membranes via Enzyme-Mediated Decoupling of Diffusion and Reaction 0.86
Nanoscale Thermal and Mechanical Responses of Lithium Fluoride in the Solid Electrolyte Interphase under Coupled Temperature and Pressure Conditions 0.83
Electric-Symmetric-Breaking in Cu Single-Atom Catalysts for Enhanced Acetylene Hydrochlorination 0.10
27 13.27
Altering Dendrite Growth Suppression in LiBH4-Based Electrolyte for All-Solid-State Lithium-Ion Batteries 0.71
Hygroscopic Ion-Gel Strategy Enabling Self-Assembled Polysaccharide Fibers for Sustainable PV Cooling and Water Harvesting 0.33
Mechanically Stable Honeycomb-Like Gel Polymer Electrolyte Enabling Fast Li+ Transport for High-Performance Lithium Metal Batteries 0.10
Deciphering the Role of Oxygen-Containing Functional Groups in Hard Carbon Anodes for Sodium-Ion Batteries 0.05
Zinc−Ion−Assisted Catalytic Synthesis of Hard Carbon with Superior Plateau Capacity and ICE for Sodium−Ion Batteries 0.90
Fluorinated Segmental Dilution Constructs Low‐Temperature Tolerant Localized High‐Concentration Polymer Electrolytes for Lithium Metal Batteries 1.00
Heterogeneous PEO/Electrodes Interface Coordination Chemistry Enables High-Voltage Solid-State Lithium Metal Batteries via an Asymmetric Electrolyte Design 0.73
Robust and Conductive Polymer Electrolytes via Solvent-Guided Hierarchical Network Formation 0.82
Extensible-Aligned Liquid Crystalline Interphase Enabling Ordering-Induced Deposition for Ultra-Stable Zinc Metal Batteries 0.03
Engineering Vesicle‐Like Polyamide Nanofiltration Membrane via Interfacial Polymerization on Shear‐Triggered Nanoclay Hydrogel 1.00
Atomically Dispersed Cr‐Enhanced Zeolite Catalysts for Accelerated Sulfur Conversion and Interphase Stabilization 0.69
Non‐Covalent Molecular Engineering of Hydrogel Electrolytes via π‐Anion Confinement and Hydrogen‐Bond Reconfiguration for Wide‐Temperature and Ultra‐Stable Zn‐Ion Batteries 0.07
Interfacial Engineering of Ion-Sieving Sodium Alginate/Halloysite Nanotubes Modified Cellulose Separator for Ultra-Stable Aqueous Zinc-Ion Batteries 0.49
The Latent Culprit of Anode‐Free Lithium Metal Batteries Degradation 0.78
Solvent Engineering-Driven Anion Chemistry Enables Stable Zn Interfaces for Wide-Temperature Aqueous Zinc Batteries 1.00
Regulating Ion Migration and Deposition Through a Cellulose Hydrogel Electrolyte Enabled by Anion‐Reinforced Effect for Zinc‐Ion Batteries 0.25
Multidimensional Engineering of Mixed Protonic‐Electronic Conducting Membranes with Excellent Hydrogen Separation Performance 0.11
Pre‐Loaded Functional Ion Pair in Hollow‐Sphere Channels for Enhanced Hydroxide Ion Conduction in Alkaline Flow Battery Membranes 0.04
Engineering Electronic Delocalization Facilitates Interfacial Desolvation Kinetics for Dendrite-Free Zinc-Metal Batteries 0.13
Asymmetric Triple Catalytic Sites on Ternary-Metal Sulfides Enable Superior Radical-Nonradical Synergy in Water Purification 0.17
Self‐Dispersing Halide Catholyte Engineering for Enhanced Areal‐Capacity All‐Solid‐State Lithium Batteries 1.00
Localized Anion‐Enriched Environment Via In Situ Electrostatic Confinement Effect for Stable Lithium Metal Batteries 0.11
Sustained-Release PVDF-Based Electrolyte Producing LiF-Li2O Layered Interphases for High-Rate Solid-State Lithium Metal Batteries 0.02
Bipyridinic Iron Single Atom in Metal–Organic Frameworks as Electronic Pump of H2O2 for Continuous Water Decontamination 0.67
Overlooked P-Doping Destroys CoSe2’s Lattice Ordered Structure for Modulating the Deposition of Li2S 1.00
Deciphering the Maze of Monomer Concentrations for Customizing Ion‐sieving Performance of Polyamide Membranes 1.00
Unlocking Unprecedented Gravimetric Capacitance in Thick Electrodes Through Conformal Densification of Robust MXene Hydrogels 0.08
29 12.29
Lightweight, Strong, and Resilient 3D Graphene Metamaterial via a Multi-flow Assembly 0.79
Self‐Evolving Interfacial Kinetic Highways via Reactive Separator Engineering for Durable Potassium Metal Batteries 0.04
Kinetics-Optimized Crown Ether Engineering Enables Ultra-Flat Lithium Metal Interface for Long-Cycling 532 Wh Kg−1 Pouch Cells 0.42
Li3N-Enriched Solid Electrolyte Interphase Derived From Interfacial Catalysis Toward High-Performance Lithium Metal Batteries 0.77
Micro-Terraced Surface Induced Directional Two-Dimensional Diffusion Enables Dendrite-Free Zinc Anodes 0.14
High-Valence-Cation-Induced Lattice Expansion for Activating Li2S Cathode in All-Solid-State Lithium-Sulfur Batteries 0.06
Optimizing f-d Hybridization Descriptor in Rare-Earth Oxides for Efficient Sulfur Catalysis in all Solid-State Lithium–Sulfur Batteries 0.04
Directional Catalysis of Sulfur at Highly Ordered Triple‐Phase Interfaces in All‐Solid‐State Lithium‐Sulfur Batteries 0.91
Sustainable Continuous Scale Synthesis of Positive Material for High-performance Wearable Aqueous Zn Metal Batteries 0.03
Gradient-Modified Li-Rich Manganese-Based Oxides Cathodes with Breakthrough of Kinetic Limitation for High-Performance All-Solid-State Lithium Metal Batteries 0.44
Suppressing Electric‐Field‐Induced Cathodic Salt Crystallization for Stable Zinc‐Ion Batteries 0.10
Plasma Design of Alloy-Based Gradient Solid Electrolyte Interphase on Lithium Metal Anodes for Energy Storage 0.05
Energy Density Recovery by Enhanced Hydrogen Bonding for High‐Performance Composite Phase Change Materials 0.83
Close-Loop Cathode Chemistry Enables Self-Rejuvenating Aqueous Zn–Te Batteries Compromised by Non-Equilibrium Redox Pathways 0.01
Bond-Discretization in Nickel Oxide to Boost Capacity for Rechargeable Nickel─Zinc Batteries 0.11
Cost‐Effective Passive Ammonia Fuel Cells via Synergistic Integration of Optimized Membrane Electrode Assembly and Prototype 0.02
Reactivating the Current Collector: A Catalytic Strategy for Carbon‐Free Sulfur‐Based Cathodes 0.88
High‐Compaction Spherical Carbon with Tunable Rich Pore Structures for Efficient Sodium Storage 0.18
Hygroscopic‐Evaporative Generator for Multiform Energy Harvesting from Environment and Food Storage 1.00
Localized Water Confinement via Micellar Electrolyte for Aqueous Zinc-Vanadium Batteries 1.00
Mechanically Induced Bridged Interlayer Enabling Highly Reversible All-Solid-State Sulfur Cathodes 1.00
Modulating Interfacial Solvent Aggregation Chemistry to Enable Low‐Temperature Sodium‐Ion Battery 0.61
A Dipole‐Engineered Electrolyte Paradigm to Overcome Desolvation Barriers for Exceptional Ultralow‐Temperature Energy Storage 0.81
Invoking Hybrid‐Ion Correlation Electrochemistry to Enable Optimal Aqueous Zn‐Ion Batteries 0.17
Interfacial Coordination Engineering to Boost Li‐Ion Conduction in Economic Zr‐Based Halide Electrolytes 1.00
Synergistic Compound Additives for High‐Performance Lithium–Sulfur Batteries 0.60
Catalytic Solder Fuses Solid‐Solid Interfaces for All‐Solid‐State Lithium‐Sulfur Batteries 0.05
Ion‐Framework Electrolyte Featured Zinc‐Ion Transport for Solvent and Interphasial Co‐Passivation 0.03
Inner-Layer Indium Doping Achieved Highly Active and Stable Sulfur Vacancies in MoS2 for Superior Sulfur Redox Kinetics 0.20
1 0.25
Monitoring O2– Behavior during Electrolysis in Molten CaCl2 0.25
35 12.38
Solid-to-Solid Zn Anode and Interhalogen Iodine Cathodes for High-Voltage Fluoride-Ion Batteries 0.04
Cyano-Triggered Strong Anion-π Interactions: Unlocking Anion–Cation Adsorption Bifunction 0.10
Ultrafast Anion-Hopping Conduction in Organic Solvent via Imidazolium-Grafted Dynamic Ion-Conducting Spacers for Stable Non-Aqueous Flow Batteries 0.05
Interfused Graphene Fiber Membranes Enable Volumetric Electron-Transfer Advanced Oxidation via Interlayer Site Activation 0.39
Interfacial Hydration Engineering Synchronizes Hydrogen Evolution and Brucite Mineralization in Seawater Electrolysis 0.86
Spin-Regulated Fe-Cu Diatomic Catalytic Chemistry Enables Significant Minimization of Catalyst Consumption With High-Efficiency Fenton-Like Activity 0.67
Synergistic Rh1–Cu1 Dual-Atom-Site Enhancing Performance of Ethane Low-Temperature Oxidation via Auto-Selective Oxygen Source From O2/H2O 0.11
Rational Design of Asymmetric Lithium Salts with Multi-Functional Capabilities for Stable Lithium Metal Batteries 0.00
Interfacial Charge Orchestration for Durable Aqueous Zn Batteries 0.68
Patching Solid Electrolyte Interphase via Modulating Anion Decomposition Reactions for Stable Lithium Metal Batteries 0.03
A Diffusion-Retarded Strategy for Practical Zn–I2 Batteries Under Harsh Conditions 0.08
Electrolyte-Free Electrosynthesis of Pure H2O2 via Triple-Phase Interface Engineering 0.02
Superior Room‐Temperature Anhydrous Proton Conduction in 3D Porous Benzimidazole Membranes Enabled by Strong Acid Confinement 0.14
Inverse NiOx-Ag Interface to Decouple Reactant Activation for Ag-Ni/SiO2-Catalyzed Ester Hydrogenation 0.06
Tailoring Cathode Interphase Chemistry for High-Voltage Li-ion Batteries 0.85
Chlorinated-Solvent-Based Electrolyte for Safe and Stable Lithium Battery Chemistry 0.08
A Universal Principle of Lithium Bond Characteristics in Lithium Battery Electrolytes 0.02
In Situ Chemical Construction of Ultrathin Zn2+-Conductive Interphase for Dendrite-Free Zinc Metal Batteries 0.20
Entropy‐Driven Modulation of Ion Clustering and Polymer Crystallinity for Low‐Temperature Lithium Metal Batteries 0.88
Noble Metal‐Free Low‐Temperature Aromatization of Polyethylene Waste for High‐Quality Fuel Production 1.00
Molecular Design of Asymmetric Difluorinated Ether Electrolytes for Stable Operation of High‐Voltage Lithium Metal Batteries 0.08
Hydrophobic Poly(divinylbenzene) Polymer‐Supported Ruthenium Catalysts for Efficient Hydrogenation of Pyridines in Water 1.00
Electronic Structure-Engineered Proton Depletion Interfaces on Ternary RuO2 for Ultra-Stable Kilowatt Electrocatalysis 0.47
Intramolecular Hydrogen‐Bonding Catalyst/Initiator for Precise Synthesis of Polycarbonates and Copolymers with Unprecedented Activity and Molecular Weights 0.33
Electric Field‐Insensitive Solvation Chemistry Stabilizes High‐Voltage Lithium Metal Batteries 0.89
Engineering Anion‐Diluent Matrix for Ion‐Decoupled Localized High‐Concentration Electrolytes toward Highly Stable Aqueous Zinc Ion Batteries 0.89
Unraveling the Potential‐Regulated Selectivity of the Cu‐Based Catalyst in 5‐Hydroxymethylfurfural Electro‐Oxidation 0.25
A Natural Oxygen‐Harvesting Electrode Enables Aeration‐Free Electrochemical Advanced Oxidation for In Situ Water Remediation 0.38
A Resonance Hybrid Design for Stable Aqueous Organic Redox Flow Batteries 0.24
Regulating Solvating Sites for Stable High‐Voltage Lithium Metal Batteries 0.85
Molecularly Woven Artificial Solid Electrolyte Interphase 0.45
A Fluorine‐Free Organic/Inorganic Interphase for Highly Reversible Aqueous Zinc Batteries 0.03
A Sustainable and Scalable Approach for In Situ Induction of Gradient Nucleation Sites in Biomass‐Derived Interface Layers for Ultra‐Stable Aqueous Zinc Metal Batteries 0.18
Data–Knowledge‐Dual‐Driven Electrolyte Design for Fast‐Charging Lithium Ion Batteries 0.03
Bypassing In Situ CO Poisoning in Furfural Conversion: Electron-Deficient Pd Single-Atom Alloys Enable One-Step Selective Synthesis of Tetrahydrofuran 0.06
5 1.94
A coupled multi-physics study on Li-ion batteries under impact loading 0.25
A review on thermal management strategy for liquid-cooling proton exchange membrane fuel cells: Temperature regulation and cold start 0.90
The role of temperature in mechanical degradation of catalyst coated membrane in fuel cell: A 4D in-situ investigation based on X-ray computed tomography 0.02
Low-energy-consumption CO2 capture via coupling process of direct organic fluid stripping with biphasic solvents 0.70
Recent advancements in designing high-performance proton exchange membrane fuel cells: A comprehensive review 0.07
5 3.23
Solvation regulation and interfacial adsorption by ethanolamine-based eutectic electrolytes toward byproduct-free zinc anodes 1.00
Recent progress in efficient zeolite-based catalysts for catalytic conversion of C1 molecules 0.31
Carbon particle aggregation for enhanced flow capacitive deionization 0.33
Dual-component modulation strategy for enhancing interfacial compatibility in 4.6 V LRMO-based solid-state lithium metal batteries 0.58
Conversion of CO2 into cyclic carbonates using an ionic porous organic cage 1.00
4 0.44
Interlayer co-chemistry of a homologous ion stabilizer and microenvironmental molecular regulator for high-performance zinc-ion storage 0.09
Hydro-photo-synergy unlocks deep and reversible chemistry of solid-state lithium–oxygen batteries 0.09
Controllable synthesis of perovskite solid solutions as novel energetic materials via thermodynamic equilibrium 0.13
A weak acid-responsive porous polyelectrolyte membrane enables the high efficiency of a zinc anode interface 0.14
25 14.80
Experimental investigation of an indirect PV/T-assisted heat pump system with condenser-integrated phase change thermal storage 1.00
Component evolution and nitrogen migration mechanism in plasma-ionized air-assisted ammonia combustion: a reactive molecular dynamics study 0.06
Performance analysis of an open absorption heat pump for the drying of CO2 mineralized materials 0.79
Balancing Power Density and Storage Capacity in Cryogenic Energy Storage: A Dynamic Optimization of Nano-enhanced Phase Change Materials 1.00
Co-production of syngas and activated carbon from bamboo through the 340 kWe pilot-scale downdraft gasification gasifier: Optimal the air flow rate and activation condition 0.07
Performance analysis of integrating solar energy with low-grade waste heat recovery for decarbonising industrial heating 0.67
Hydropyrolysis vapor upgrading reaction pathways of guaiacyl phenolic compounds: Hydrogen transfer mechanisms 0.83
A holistic dynamic model for liquid hydrogen transfer process 1.00
Adaptive hybrid model-based and data-driven control for air-cooled proton exchange membrane fuel cells temperature regulation 0.10
Study on the transient thermal response of annular borehole heat exchangers array under cyclic operation of cooling and heating 0.54
An innovative accounting framework for CO2 emissions in the power sector: based on the energy flow relationship between the power and heat sectors 0.67
Modeling and Porosity Configuration for Enhanced Metal Foam and Cryogenic Phase Change Material Composite Performance 1.00
Design and Evaluation of Closed-loop Carbon Recycling Strategies based on Co-electrolysis for On-site Reusing CO2 in the Blast Furnace Gas 0.55
Numerical analysis of carbon dioxide mineralization process in a bubbling fluidized bed 1.00
Side-stream extractive distillation process with intermediate reboiler and heat integration design: from green entrainer screening to energy-saving improvement 0.08
Research on the stability assessment method of bubbling fluidized bed sludge incineration system based on multi-source features 0.63
Research on the effects of extracting main steam and reheat steam on enhancing the flexibility of the coal-fired power plants 0.38
A numerical study of the effects of coil pipes arrangement on the thermal storage capacity of phase change energy storage tanks 0.20
Analysis and optimization of the performance of a solar PV/T system integrated with seasonal latent heat storage for decarbonized heating and hot water supply 1.00
Dynamic modeling and characteristic analysis of dry/wet state transition process for supercritical thermal power unit 0.33
Energy and techno-economic analysis of aviation fuel production via biomass gasification, olefins synthesis and oligomerization 0.86
Catalytic enhancement of MOF-derived Fe@C catalysts in microwave-assisted co-pyrolysis: synergistic integration with bamboo-based pyrolytic char and microwave carbonization 0.18
Heat-stored calcined clay limestone cement: Role of microencapsulated n-octadecane with calcium carbonate shell 0.14
Enhancing cross-temperature state-of-charge estimation accuracy for lithium-ion batteries using multi-physics features and physical guidance 1.00
Enhancing the future adaptability of boiler systems using multi-input extremum seeking control algorithms 0.74
10 4.76
A stable 15-Ah anode-free Li pouch cell enabled by the electron resonance effect 0.74
Ligand-field regulation enables high energy-efficiency cathodes for aqueous zinc-ion batteries 0.15
A universal interfacial strategy for suppressing aluminum corrosion by confining H+/OH− dynamics in aqueous energy storage systems 0.83
π-hole driven defluorination for fast kinetics of Li/CFx batteries 0.77
Cathode passivation suppression enables ultrastable industry-leading alkaline water electrolysis at hundred-ampere currents 0.63
Fluorinated carbon nitride-assisted solvation-regulation engineering toward polyvinylidene fluoride-based electrolytes for long-lifespan solid-state lithium batteries 0.13
Toward practical lithium metal batteries via a solvation structure regulation strategy in in situ polymerized fluorinated gel polymer electrolytes 0.33
Interfacial gradient engineering synergized with self-adaptive cathodic defense for durable Zn-ion batteries 0.19
Blocking pore design enables highly reversible lithium–chlorine batteries 0.02
Compacting surface charge layers for efficient charge transfer toward stable Zn anodes 0.97
4 1.58
Fe-N co-doped biochar: Enhanced removal efficiency and mechanistic insight into perfluorooctane sulfonate (PFOS) 0.13
Performance of a floating Ca/Fe Modified Pumice in phosphorus removal from agricultural drainage water 0.83
Unraveling synergistic radical and non-radical pathways in bromide and iodide-activated peroxymonosulfate systems for selective abatement of micropollutant 0.50
Enhanced pollutant removal in moving bed biofilm reactor under high-salinity condition via specialized quorum sensing bacteria 0.13
14 4.54
Luxury at a Cost: Portable XRF-Based Bioaccessible Chromium in Sweat Predicts Dermal Exposure Risk to Chromate in Leather Products 0.19
Granular Stratification Enables Stable and Efficient Nitrogen Removal in Anammox Sludge Bed Reactors 0.64
Unveiling Exceptional Membrane Distillation Performance via a Wettability Transition in Covalent Organic Frameworks 0.05
Plant-Level Health Benefits from Decarbonizing the Iron and Steel Industry in China 0.08
Tailoring the Interfacial Microenvironment of Atomically Dispersed Zinc to Boost Electron Transfer Process for Water Purification 0.13
Engineered Nanoparticle Interfaces Optimize Phase Change Behavior through Enhanced Mass- and Heat-Transfer for High-Efficiency Industrial CO2 Capture 0.85
Electrochemical Upcycling of Shell Waste for Sustainable Nutrient Recovery from Wastewater 0.19
<atl>Transforming Coal Fly Ash into Climate Solutions: AlOOH-Supported Solid Amine Adsorbents for Cost-Effective and Ultranegative CO sub2/sub Emissions</atl> 0.27
Dual Roles of Phenolic Groups in Pyrogenic Carbon as Mediators and Quenchers for Hydroxyl Radical Production 0.71
Bioinspired Dual-Electric-Channel Membrane for Efficient Photothermal Evaporation and Ion-Selective Crystallization 0.04
Perfluorooctanoic Acid Can Increase Biofilm Resilience and Virulence in Drinking Water Distribution Systems 0.17
Oxygen Vacancies Engineering of Co3O4 to Modulate the Adjacent Environment: Boosted Singlet Oxygen Generation in Peroxymonosulfate-Mediated 2-Chlorophenol Degradation 0.11
Aliphatic Disinfection Byproducts Induced Antibiotic Resistance in iEscherichia coli/i through Cell Wall Alteration 1.00
New Insights into Natural Polyphenol-Enhanced Fe(III)/Peracetic Acid System under Acidic pH Conditions: The Overlooked Role of Coexisting Hydrogen Peroxide 0.11
1 0.05
Chemical Interaction Customized Metal–Organic Framework Enables Regulated Conductive Network for Selective Superionic Conduction in Solid-State Batteries 0.05
7 4.96
Granular sludge-based partial denitrification/anammox achieving high anammox contribution for nitrogen removal from municipal wastewater using anoxic/aerobic process with independent sludge system 0.07
Stepwise pyrolysis of biodiesel-derived oil sludge: Product distribution, sulfur/nitrogen release, and resource recovery 0.83
Constructing ferrihydrite confined in 3D boron-doped network biochar: simultaneous adsorption and oxidation of As(III) and tetracycline 1.00
Synergistically engineered chitosan/polyethylene glycol hydrogel with dynamic H-bonding and enhanced photothermal CNTs for robust atmospheric water harvesting 0.92
Green methanol synthesis from renewable energy integrated with compressed CO2 energy storage and waste-based systems: Thermodynamic, economic and environmental assessment 0.14
Engineering bicarbonate pathways through amine synergy: Mechanistic insights into high-efficiency CO2 capture with a tailored ternary blend 1.00
Effect of water washing on pyrolysis of Shaerhu coal and prediction of sodium and chloride release using neural network model 1.00
20 4.97
Polymer-Modulated Solvation Chemistry via Compatibilizing-Solvent Plasticization for Stable High-Energy Lithium Metal Batteries 0.08
Reticular Assembly of Complex Cage-within-Cage Merged-Net MOFs for Lithium-Ion Conductivity 0.67
Photocatalytic Flow Synthesis of Acetone from Methane Carbonylation Using Customized Flow Patterns 0.09
A Band-Matching Descriptor Breaks Scaling Relations for Sulfur Electrocatalysts 0.06
Overlooked Solid Electrolyte Interphase Destabilization by Oxygen Gas Crossover in High-Energy Lithium-Ion Batteries 0.18
Quantitative Diagnosis of Li Plating Morphology by Analyzing Response of Electrochemical Impedance Spectroscopy in Working Li Batteries 0.01
Sequenced Interfacial Chemistry for Stabilizing Reactive Lithium Metal Anodes 0.64
Catalyzing Li-Salt Dissociation and Decomposition for a Conformal Low-Impedance Solid Electrolyte Interphase in Solid-State Li Metal Batteries 0.01
Cleavage Alkylation Coupling with Versatile Amide-Based Eutectic Catalytic Systems 0.18
Rational Lithium Salt Selection Principle for Designing High-Entropy Electrolytes toward High-Performance Lithium Metal Batteries 0.17
Heterointerface-Enabled Anti-Reverse-Current Electrodes for Alkaline Water Electrolyzers at 1000 mA cm–2 0.02
From Cell to Atomic Level: Understanding the Degradation in 99% Coulombic Efficiency and 450 Wh kg–1 Anode-Free Pouch Cells 0.08
Ultrafast Encapsulation of Bimetallic Nanoclusters into Zeolites: Linking Structural Features to Catalytic Performance 0.13
Integrated Solvation Chemistry Enables High Energy Li Metal Batteries 0.59
Modulating Molecular Microheterogeneity within Electrolytes Controls Macroscopic Battery Performance 1.00
Molecular Engineering of Self-Folded Lithium Salts toward High-Energy and High-Power Lithium Metal Pouch Cells 0.01
Tandem Catalysis to Mitigate Coke Formation in the Upcycling of Mixed Polyolefin Wastes 0.20
Elucidation of the Structure–Activity Relationship for Cu-Erionite in the Direct Conversion of Methane to Methanol: An Operando XAS Study 0.01
Cu Nanocluster Size Effect Inducing the Transformation of Polysulfides to Cu2S/CuS for Durable Sodium Storage 0.80
Highly Efficient Assembly-Line Production of Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis over Ru/TiO2 Catalysts 0.06
3 0.65
Dilution-Tolerant Organoboron Catalyst for the Copolymerization of CO2 and Propylene Oxide Enabled by a Cyclic Anhydride 0.08
Copolymerization of CO2 with Epoxides by Imidazolium Engineering in Bifunctional Organoboron Catalysts 0.50
Synergistic Rigid Twisted and Fluorinated Architectures in Zwitterionic Poly(arylene ether sulfone) for Ultrahigh Water/Salt Selectivity 0.07
3 0.32
Quantifying Chemical Capacitance and Diffusion Coefficients in Hydrogenated La0.6Sr0.4FeO3–δ via Operando Spectro-Electrochemical Characterizations 0.07
Suppressing Continuous Zinc Epitaxial Growth in Rechargeable Zinc–Air Batteries via Plating–Stripping Balance of Ultra-Reversible Anodes 0.23
Gradient Desolvation–Diffusion Kinetic Layer Promoters for Low-Temperature Dendrite-Free Zn Metal Batteries 0.02
5 0.90
Planar Li deposition and dissolution enable practical anode-free pouch cells 0.02
Practical lithium–organic batteries enabled by an n-type conducting polymer 0.11
Pulse heating and slip enhance charging of phase-change thermal batteries 0.69
Tailoring polymer electrolyte solvation for 600 Wh kg−1 lithium batteries 0.00
Liquid–liquid interfacial tension stabilized Li-metal batteries 0.08
1 0.08
Solid solvation structure design improves all-solid-state organic batteries 0.08
25 8.36
Smart-flame-retarding layered composite Li negative electrode for safe Li metal battery 0.05
In-situ revitalizing end-of-life MBR membranes via a curtain-type dynamic membrane process 0.07
Solvation sheath reorganization enables fast ion transfer kinetics in lithium-ion battery 0.90
A hydro-topological strategy enables self-regulating biofilms for sustainable wastewater treatment 0.60
A countercurrent microflow strategy for simultaneous high selectivity and conversion in aromatic nitration 0.25
Global application of radiative cooling in grain storage 0.09
In situ-formed C-N anchors embedded into Sn-based negative electrodes for long-life Na-ion batteries 0.64
Overcoming the trade-off in reverse osmosis membranes through homologous matching 0.03
Green chemical process for continuous production of high-purity 2,5-furandicarboxylic acid in anion exchange membrane flow electrolyzer 0.11
A self-breathing electrode enabled by interface regulation and gradient wettability engineering for industrial HO electrosynthesis 0.70
Economical biogas direct methanation to pipeline grade natural gas via structured Ni based inverse catalyst 0.08
Spatially decoupled electrochemical strategy for lime passivation prevention and sustainable phosphate recovery 0.28
Dynamic electronic modulation of single-atom Fe sites with p-block metal coordination enables highly selective generation of FeIV = O in Fenton-like reactions 0.48
Elucidating the role of interfacial charge transfer on the oxygen incorporation/evolution reactions for solid oxide cells 0.07
Voltage-controlled organic solvent nanofiltration using conjugated microporous polymer membranes 0.08
Latent heat-assisted cooling for high-efficiency solar-driven freshwater production 0.50
Covalent and polyfluorinated lithium salt for stable LiCoO batteries at high temperature and high voltage 0.21
Single-atom Ru coupled with AlCl3 to promote asymmetric C-C coupling between CH4 and CO2 0.86
Membrane-free CO2 electrolyzer design for economically efficient formic acid electro-synthesis 0.92
Bioinspired interfacial nanofluidic layer enabling high-rate and dendrite-free lithium metal negative electrodes 0.17
Neighboring alkenyl group participated ether-based electrolyte for wide-temperature lithium metal batteries 0.25
Enhanced specific energy in fast-charging lithium-ion batteries negative electrodes via Ti-O covalency-mediated low potential 0.09
Solvent-free thermoplastic foaming for superelastic graphene monoliths 0.75
Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries 0.07
Dual-structure-breaking electrolyte enables practical cadmium-metal battery 0.11
2 0.76
Ultrafast thermo-responsive electrolyte for enhanced safety in lithium metal batteries 0.21
Unified affinity paradigm for the rational design of high-efficiency lithium metal electrolytes 0.55
2 0.99
Optical nanoscopy of spatiotemporal metal stripping cooperativity at single-ion and subparticle resolution 0.14
High-performance graphene-based carbon fibres prepared at room temperature via domain folding 0.85
2 0.41
Nanoengineered aqueous-hydrotrope hybrid liquid electrolyte solutions for efficient zinc batteries across a wide temperature range 0.36
A nanoengineered lithium-hosting carbon/zinc oxide composite electrode material for efficient non-aqueous lithium metal batteries 0.06
2 0.58
Non-corrosive organodichloro electrolyte for reversible aluminium metal batteries 0.05
A smart framework to design membranes for organic micropollutants removal 0.53
2 0.67
A practical 4.8-V Li||LiCoO2 battery 0.25
High-value organic solvent recovery and reuse in perovskite solar cell manufacturing 0.42
1 0.25
High-resolution estimation of urban anthropogenic carbon emissions 0.25
1 1.00
In Situ Electric-Field Guided Assembly of Ordered Bilayer Solid Electrolyte Interphase (SEI) Enables High-Current Zinc Metal Anodes 1.00
14 4.36
Odorous disinfection byproducts from sweet peptides during chlorination 0.08
Nicotinic acid enhances heavy metal stress resilience of wastewater anammox communities via NAD+ replenishment 0.19
Solar Light Irradiation Activated Dichloramine for Efficient Abatement of Micropollutants 0.12
Dissolved organic matter treatability and disinfection byproducts formation potential: Role of floc aging 0.57
Development and Long-term Technical Validation of an Automated Bioelectrochemical System for Online BOD Monitoring of Wastewater Hydrolysis Acidification Effluent 0.56
Metagenomic Insights into the Global Distribution and Functional Potentials of Major Polyphosphate-Accumulating Organisms (PAOs) in Activated Sludge Wastewater Treatment Plants 0.21
UVB-activated permanganate enables rapid emerging organic contaminants decontamination through synergistic HO• and reactive manganese species 0.17
A Solar-Driven System with a Closed-Loop Water Cycle for Passive and Sustainable Saline Soil Remediation 0.52
Synergistic Ti₄O₇ Anode and Waste Al Can Cathode for Enhanced Phosphonate Degradation and Hardness Removal 0.33
Persulfate activation by biochar for trace organic contaminant removal from urban stormwater 0.14
Virulence-mediated colonization mechanism for TEP as a promising watershed-scale recorder and source-tracking indicator of human pathogens 0.17
Accelerating iron redox cycling via acetate modification: a ligand engineering for sustainable fenton-like oxidation 0.42
Salinity-driven trade-offs between nitrogen removal and microbiome dynamics in Fe-C-CWs toward saline aquaculture tailwater management 0.13
Inclined Multilayer Solar Evaporator for Directional and Refined Salt Crystallization from Practical Industrial Wastewater 0.76

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.