Mechanical Engineering articles for Zhejiang University (ZJU), China

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 63

Article ‘Count’ for Mechanical Engineering.

Journal Count Share
3 0.51
Gradient Entropy Surface Architecture Stabilizes LiCoO2 to 4.7 V 0.03
Thiol–Amine Complexes for the Synthesis and Surface Engineering of SnTe Nanomaterials toward High Thermoelectric Performance 0.20
Achieving High-Yield Conversion of Janus Transition Metal Dichalcogenides on Diverse Substrates 0.29
6 1.41
Flexible Polycrystalline Ferroelectric Oxide Films With Ultrahigh Photovoltaic Current 0.56
Regulating Reversibility of Anion Redox and Electronic Structure via Controlled Surface Oxygen Vacancies in Lithium‐Rich Layered Oxides 0.11
Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices 0.21
Exceptionally Large Thickness-Independent Longitudinal Strain in Lead-free Piezoceramics via Defect Dipole Engineering 0.42
Probing the Origin of 2D Covalent Organic Frameworks with High Thermoelectric Performance Down to the Ångström Level 0.07
Three‐In‐One Structural Design Enables High‐Stability Co‐Free Li‐Rich Cathodes 0.04
3 0.46
An Integrated Stainless Steel-Based Electrode for Durable Direct Natural Seawater Electrolysis 0.19
Flow‐Regime‐Controlled Fabrication of CNT‐Bridged Vertically Aligned rGO/MXene Fibers for High‐Performance Fiber Supercapacitors 0.17
Synergistic Microstructure and Composition Engineering via Na2S Enables High-Performance Porous PbTe Thermoelectrics with Ultrahigh Device Power Density 0.10
5 1.83
Dynamic performance and control of Carnot battery-based combined cooling, heating and power systems with cascaded latent thermal energy stores 0.14
One-step thermal engineering of FTO substrate: unlocking higher-efficiency perovskite solar cells 1.00
Efficiency analysis of large-scale vanadium redox flow battery at different temperature conditions: a validated model-based study 0.20
Off-grid green hydrogen production and liquefaction system driven by renewable energy and LNG cold energy: A comprehensive 4E analysis and optimization 0.20
Conceptualization and investigations on a cooling-heating co-generation and step-utilization heat pump for efficient direct air capture 0.29
3 0.88
Extended multi-temperature model for electron–phonon coupling and ultrafast thermal transport in graphene 0.33
Revealing phonon signature of dislocations in silicon carbide using machine-learning interatomic potential 0.44
Grain orientation dependent superelasticity in ferroelectrics for enhanced electromechanical properties 0.10
2 0.81
Interfacial perfluorosulfonic acid ionomer stabilizing sputtered Bi catalyst for highly selective and scalable CO2-to-formate electroreduction 0.74
Defect engineering in cellulose for piezocatalytic generation of hydrogen peroxide under ambient conditions 0.07
25 14.04
Efficiency mapping and loss analysis of ORC radial inflow turbines using an optimized mean-line design methodology 1.00
Non-blackbody radiation exergy analysis model based on equivalent temperature method for energy conversion application 1.00
Efficiency enhancement of a unidirectional impulse turbine for dual-chamber OWC wave energy converters 0.07
Modelling and experimental validation of a polygeneration system for hydrogen, power and ammonia using sorption-enhanced chemical looping steam reforming with in-situ carbon capture and utilization integrated with chemical looping combustion and water splitting 0.14
Wave energy extraction from a semi-circular oscillating water column attached to a straight breakwater 0.50
Process Modeling and Thermal Integration of Coal-fired Power Plants with Advanced CO2 Capture Using 2-Amino-2-methyl-1-propanol / Piperazine 0.17
Experimental and numerical study on optimizing thermoelectric generator for improved energy efficiency of heat recovery 0.11
Numerical and experimental study on a multi-body articulated wave energy converter 0.83
Hotspot selection and complementarity for combined offshore wind and wave energy utilization in the China East Adjacent Seas 0.88
Experimental study on the Heat-Transfer Mechanisms and Thermophysical Characteristics of Flue Gas–Molten Salt Systems 0.60
Wave energy resources in China’s largest archipelago from a 30-year high-resolution hindcast 1.00
Accelerating multi-energy system online optimization via integer state variable prediction with operation strategy learning 0.69
Numerical and experimental study of a novel four-stage thermoacoustic engine with multi-looped structure 1.00
Thermodynamic and economic analysis of an adiabatic compressed air energy storage system coupled with an air separation unit 0.20
Cryogenic Carnot battery energy storage system for utilization of LNG cold energy: Optimization, thermodynamic and economic analysis 1.00
Integrated LNG cold energy-based system combining liquid air energy storage and air separation unit: A novel synergistic solution for supply-demand coordination and power grid peak-shaving 0.50
Photon-enhanced thermionic emission solar converters with light-transparent anode: Observing significant efficiency boost 0.13
Frost suppression performance and degradation mitigation strategy of superhydrophobic air source heat pump 0.07
4E analysis on a hybrid sustainable and decarbonised system for LNG cold energy recovery 0.71
Research on the energy conversion characteristics of a novel distributed array hydraulic PTO system with wave-adaptive capabilities 0.83
Performance evaluation of a novel hybrid open absorption heat pump for efficient flue gas heat recovery at high return water temperatures 0.14
Design, modelling and experimental validation of integrated hydrogen-ammonia-methanol multi-carrier energy conversion for the emerging solid oxide fuel cell with waste heat recovery technology 0.13
Enhancing the efficiency of oscillating water column wave energy converters with sawtooth-shaped front walls: An experimental investigation 1.00
Design and test of an off-grid marine current-powered seawater desalination and hydrogen production system 1.00
Experimental characteristics of thermionic energy converters employing barium-dispenser cathode and semiconductor anodes 0.33
3 1.46
Numerical analysis on energy and exergy performance of cascade electrical-temperature vacuum swing adsorption (C-ETVSA) for direct air capture: A parametric effect study 0.13
Experimental study of post-combustion absorption carbon capture assisted by cascade heat pump 1.00
Component-level life cycle carbon emission analysis and multi-objective optimization with power characteristics for an adaptively-coupled solar ejector-compression refrigeration system 0.33
1 0.21
Morphology and Fractal Dimension of Ambient Soot Particles From Vehicular Emissions in Three Contrasting Urban Tunnels 0.21
1 0.08
Liquid–Solid Interface Reactions Drive Enhanced Thermoelectric Performance in Ag2Se 0.08
1 0.48
Polymer Coating Enabling a Durable Conductive Network for Si-Based Lithium-Ion Batteries 0.48
3 0.62
Surface halogenation engineering for reversible silicon-based solid-state batteries 0.10
Three-dimensional network of multi-fold twins enabled by geometrically necessary amorphous zones 0.50
Flexible high-entropy functional ceramics 0.02
1 0.38
Harmonized sodium coordination engineering for high-energy phosphate cathodes 0.38
1 0.13
Revisiting the mechanisms of thermal transport in vacancy-defective silicon 0.13
2 1.10
Role of Stiffness in Friction with Graphite 0.10
Design of Frictionless Interfaces for Moiré Layers 1.00
1 0.15
On-Device Control of Electronic Friction 0.15
2 0.57
Electronic-phononic decoupling and Fermi-level tuning enable high thermoelectric performance in Ag8SnSe6 0.08
Bioinspired supramolecular fibrillization enables stretchable and biodegradable piezoelectric bioelectronics 0.49

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.