Electronics, Sensors and Digital Hardware articles for University of Science and Technology of China (USTC), China

Time frame: 1 June 2025 - 30 May 2026

View topic

Count: 103

Article ‘Count’ for Electronics, Sensors and Digital Hardware.

Journal Count Share
1 0.12
Hard–Soft-Acid–Base Management Enabled Bright and Stable Pure-Blue Perovskite Quantum Dot LEDs 0.12
15 5.54
Decoupling Internal-External Junction Competition in p-InGaN/n-BiVO4 Photocathodes on Silicon Wafers for Efficient Neutral PEC Water Splitting 0.89
Nanoparticle-Assisted Crystallization Engineering Toward Efficient, Low-Temperature-Processed Sb2(S,Se)3 Solar Cells 0.88
Extrinsic Doping and Interface Engineering of Nonaqueous Tin Oxide Nanocrystals for Efficient Perovskite Solar Cells 0.04
Naphthalene-Extended Star-Shaped Trimer Acceptor Simultaneously Enabling Over 20% Efficiency and Enhanced Operational Stability in Organic Solar Cells 0.07
Customized Design of Twist‐Stacking Films Towards Polarization Multiplexing and Full Polarization Detection 1.00
Bifunctional Electron‐Transport Layer Engineering Enables Energy‐Level Alignment and Interfacial Passivation for Efficient PeLEDs 0.29
Homogeneously Contacted Co‐Self‐Assembled Monolayer Enables over 26% Inverted Perovskite Solar Cells 0.33
Sodium Metavanadate Chelation-Assisted Chemical Bath Deposition to High-Efficiency Antimony Selenosulfide Solar Cells 0.75
A Plant‐Derived Bridge Multifunctionalizes Buried Interfaces for Ambient‐Air‐Fabricated Flexible Perovskite Solar Cells with High Efficiency and Stability 0.08
Weakly Coordinated Co‐Solvent Strategy Enables Anti‐Solvent‐Free Fabrication of High‐Efficiency Perovskite Light‐Emitting Diodes 0.36
Boosting Efficiency of Hydrothermally Grown Sbsub2/subSsub3/sub Solar Cells via Rational Sulfur Engineering 0.16
Halogen Substituent Engineering in the Quinoxaline‐based Central Unit of Acceptor for Efficient Organic Solar Cells 0.33
Aqueous Selenium Ion Engineering: A Universal Strategy to Reverse Gradient Limitations in Sb2(S,Se)3 Photovoltaics for Enhanced Carrier Dynamics and Performance 0.25
Morphology‐Mediated Effective Spatial Charge Separation for High‐Efficiency Photoelectrochemical Hydrogen Production 0.06
Bilateral Chemical Bridging Enables Efficient Ultra‐Flexible Perovskite Solar Cells With Improved Extreme Mechanical Durability 0.04
19 5.12
Doping Manipulation of Donor/Acceptor by Perovskite Quantum Dots Enables >20.5% Organic Nonfullerene Solar Cells 0.24
Stabilizing Sputtered NiOx via In Situ Dissociative Adsorption Passivation for Efficient Perovskite Solar Cells 0.24
Fluid-Crystallization Synergy for >26% Efficiency Fully Ambient-Printed SAM-Based Perovskite Photovoltaics 0.06
Ultrabright, Efficient, and Stable Green Quantum Dot Light-Emitting Diodes Through Effective Heat Dissipation 0.45
Wet-Assisted Annealing Strategy Enables All-Polymer Solar Cells Efficiency Exceeding 20% 0.18
Filled Carbon Nanotube Ternary Transistors 0.11
Positional Methylation Isomer Additives Regulate the Degradation Pathway of Perovskites 0.35
Close-Spaced Sublimation of CdCl2 Enables Uniform CdS Thin Films for Certified 8.08%-Efficient Sb2S3 Solar Cells 0.12
Floating Epitaxy and Stitching Growth of Bilayer Organic Semiconductor Single Crystals on Polymer Dielectric Toward High‐Performance and Ultra‐Flexible Transistors 0.26
Tunnel Thin‐Film Transistors for Ultralow‐Power and High‐Performance Flexible Electronics 0.27
Self-Healing Hydrophobic Buried Interfaces for Achieving Moisture-Resistant Flexible Perovskite Solar Cells with 26.38% Efficiency 0.32
Circularly-Polarized Optoelectronic Logic Gates 1.00
Emergent Global‐Pinning Exchange Bias in van der Waals Magnetic Heterostructures 0.05
Ambient-Compatible Solvent Bath Thermal Annealing for Highly Efficient Organic Solar Cells and Large-Area Modules 0.04
High Efficiency and Stable Flexible Organic Solar Cells Facilitated by Light Sensitive Hydrophilic‐to‐Hydrophobic Converting Surface Modification of the Flexible Barrier Films 0.11
Metallic Fabry‐Pérot Cavity‐Enhanced "Pseudo‐Charge Transfer" Absorption for Efficient Narrowband Short‐Wave Infrared Photodetection 0.10
High‐Efficiency All‐Antimony Chalcogenide Tandem Solar Cells via Thermal‐Evaporated CdS Interface Engineering 0.22
Exclusive Encapsulation Adhesive in a Neutral-Plane Model for Ultrahigh Mechanical Stability of Flexible Perovskite Solar Cells 0.01
High-Performance Ga2O3 In-Memory DUV Photodetectors By Interface Charge Reservoir Design for Multifunctional Applications 1.00
6 1.34
Backbone Asymmetry Modification in Amphipathic Conjugated Polymers Enables Record n‐Type Organic Thermoelectrics 0.33
Molecule‐Cooperative Strategy for Dopant‐Free Hole Transporting Layer toward Fully Printed High‐Performance Perovskite Solar Cell Modules 0.28
Achieving Uniform Phase Structure for Layer-by-Layer Processed Binary Organic Solar Cells with 20.2% Efficiency 0.01
Construction of Shamrock‐Shaped Giant Molecule Acceptors for Efficient Organic Solar Cells 0.13
Hybrid Cathode Interlayer Engineering Enables Over 20% Efficiency of Organic Solar Cells 0.24
Electron Acceptors Based on Resonant N─B←N Unit with Improved Exciton Dissociation for High‐Performance Short‐Wavelength Infrared Organic Photodetectors 0.33
2 1.43
Performance analysis of a novel CPV/T system with curved CIGS modules: Comparison with traditional flat modules 1.00
Comparison of the photoelectric power by the flexible nonplanar PV modules in different layout and design 0.43
7 1.25
Preparation of flexible inverted metamorphic four-junction AlGaInP/AlGaAs/GaAs/In0.16Ga0.84As quantum well solar cells 0.27
45.73 W/g ultra-flexible perovskite solar cells enabled with benzyl benzylcarbamate additives 0.04
Superconducting infrared nanobolometers with on-chip photon-sorting metasurfaces 0.04
Investigation and modeling of subthreshold turn-on voltage in bulk and FDSOI MOSFETs at cryogenic temperatures 0.18
Pressure-modulated triplet-state switching in zero-dimensional Sb-based hybrid perovskites 0.25
Passivation of antimony vacancies by Al3+ ions and anode interface modification for enhancing the efficiency of Sb2Se3 thin-film solar cells 0.13
Radiation enhancement in shear horizontal surface acoustic wave driven magnetoelectric antenna 0.33
8 2.89
Reconfiguring solar and thermal radiation through spectral-constraining and optimization to enable integrated solar photovoltaic conversion and radiative sky cooling 0.17
Seasonal Performance Analysis and Optical Behavior Assessment of Bifacial PV-Trombe Wall Systems 0.14
Experimental investigation on thermal characterization of flexible separated heat pipes developed for tracking photovoltaic/thermal systems 0.09
The comprehensive optimization method for CPV/T system under non-uniform irradiation: addressing illumination and temperature uniformity, and cooling & stress management 1.00
Impact of structural arrangement and electrical series-parallel connections on performance of semi-flexible crystalline silicon building-integrated photovoltaic systems 0.25
Ultra-low heat loss photovoltaic/thermal collectors based on vacuum and low emissivity technology 0.88
Design and performance evaluation of a novel solar concentration PVT system with dual-runner nanofluids optical filtering 0.20
Coupled UV–Vis light photocatalysis energy driven solar gradient utilization thermoelectric power and air purification system 0.17
3 0.13
Laser-induced surface hydroxylation of nickel oxide boosting monolayer assembly for high-performance perovskite solar modules 0.03
Enhanced εr/LD and improved acceptor crystal growth enable all-polymer solar cells with outstanding efficiency, stability, and processability from a chlorinated-dimer diluent additive 0.03
Solvent-additive cascade engineering enables single-oriented perovskite films with facet-driven performance and stability 0.07
7 0.95
Ester–Alkyl Linker-Regulated Molecular Folding in Head-to-Head Dimers Enabling >20% Efficiency in Organic Solar Cells 0.06
Programmed Twisting in Organic Lateral Heterostructures Driven by a Metastable Crystal Plane 0.31
Central Core-Twisted Conformation Acceptors Achieving 20.60% Efficiency via Suppression of Nonradiative Losses without Sacrificing Current and Fill Factor in Binary Organic Solar Cells 0.04
Revealing Effect of Surface Hydroxyl Variation on Charge Spatiotemporal Dynamics in Photocatalysis 0.08
Switching between Limiting Charge Extraction Regimes in an Illuminated Semiconductor–Metal–Organic Framework Junction 0.13
Accelerated Recombination Reaction through Interfacial FeIV=O Accumulation on Photoanode Surfaces 0.02
Transient Dipole Strategy Boosts Highly Oriented Self-Assembled Monolayers for Organic Solar Cells Approaching 21% Efficiency 0.32
2 0.65
Physics-Aware Learning of Donor–Acceptor Pair Interactions for High-Efficiency Organic Photovoltaics 0.38
Cation-Exchange Doping of n-Type Conjugated Polymers Entailing Glycolated Side Chains 0.28
5 1.34
Ultralow Dark Current Density in PbS Colloidal Quantum Dot Short-Wave Infrared Photodetectors with Homogeneous Energy Landscape 0.26
Coupling Design in the Direct Synthesis of AgBiS2 Nanocrystal Inks for Efficient and Eco-friendly Photovoltaics 0.22
Superior Multiple Exciton Generation in Ecofriendly Ag2Se Colloidal Quantum Dots 0.11
Compatibility between Schottky–Mott Limit and High Carrier-Injection Efficiency in Metal–van der Waals Semiconductor Junctions 0.01
Realizing Abundant Two-Dimensional Altermagnets with Anisotropic Spin Current Via Spatial Inversion Symmetry Breaking 0.75
2 0.77
Atomically resolved edges and defects in lead halide perovskites 0.08
Weakly space-confined all-inorganic perovskites for light-emitting diodes 0.69
8 2.92
Probabilistic computing utilizing HfO2-based stochastic ferroelectric tunnel junctions 0.95
A high-frequency silicon-graphene-germanium barristor 0.24
Ultrasensitive photodetectors enabled by pressure-induced atomic-level optimization of graphene-based heterojunctions 0.14
Suppressing solvent adducts via coordination competition enables scalable perovskite photovoltaics 0.02
Alleviating non-radiative losses in organic solar cells through side-chain regulation of low-bandgap non-fullerene acceptors 0.01
Compact and high-resolution spectrometer via Brillouin integrated circuits 0.57
Phase-probability shaping for speckle-free holographic lithography 0.81
Brightening self-trapped exciton emission in 2D metal-organic chalcogenolates via argentophilicity-mediated anisotropic compression 0.19
2 0.40
Regulation of hydrothermal reaction kinetics with sodium sulfide for certified 10.7% efficiency Sb2(S,Se)3 solar cells 0.21
Improved damp heat and thermal cycling stability of organic solar cells 0.19
1 0.25
Ferroelastic writing of crystal directions in oxide thin films 0.25
2 1.42
Internal homojunction Sb2Se3 solar cell 0.81
A miniaturized cascaded-diode-array spectral imager 0.62
1 0.02
Topological photonic crystal fibers based on bivortex line defects in three-dimensional photonic topological insulators 0.02
5 1.75
Non-Line-of-Sight Single-Pixel Imaging Using Polarization Speckle Modulation 0.70
Kerr-Induced Synchronization of a Broadband Magnon-Phonon Hybrid Frequency Comb 0.73
Generation of Pure Spin Current with Insulating Antiferromagnetic Materials 0.06
Locking Orbital Angular Momentum with Linear Momentum of Light 0.18
Electrical Switching of Altermagnetism 0.08
2 1.17
Chiral spin constrained assemblies for polarized optical mapping 1.00
Ultrastable lasing from perovskite colloidal nanocrystals 0.17
5 1.09
Long-Range Exciton Diffusion and Efficient Hole Transfer in Molecular Non-Fullerene Acceptors with Strong Resonance Structure 0.18
Mitigating Filamentary Conduction with SiNxOy to Enhance Reverse-Bias Stability in Inverted Perovskite Solar Cells 0.21
Best Practice of Identifying Chemical Constituents and Evolution of Sn-Containing Perovskites by Photoelectron Spectroscopy 0.36
Impact of Water Vapor and Oxygen Atmosphere on Carrier Dynamics of CH3NH3PbI3 Perovskites 0.25
Temperature-dependent trapping and polaron annihilation on ultrafast time scales in metal-halide perovskites 0.08

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.