Fluid Mechanics and Thermal Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 327

Article ‘Count’ for Fluid Mechanics and Thermal Engineering.

Journal Count Share
5 4.63
An Electrochemically Redox-Responsive Ion-Imprinted Permeable Membrane for Controllable Separation of Monovalent Ions 1.00
Bionic Ion Pumps: Triazine-Based Covalent Organic Framework Nanofluidics for Photo-Induced Ion Transport and Nanofluidic Energy Conversion 0.97
Efficient Proton Rectification in Quasi-Solid-State Nanofluidic Diode Membrane for Ionic Signal Processing and Computing 1.00
Dynamic Modeling of a Stream-Current-Based Microfluidic Nanogenerator 0.67
Electrostatically Gated Trilayer Graphene Nanopore as an Ultrathin Rectifying Ion Filter 1.00
1 0.14
Exploring the link between disturbed flow and endothelial cell function in an in vitro arteriovenous fistula model 0.14
5 4.40
Bioinspired Janus Microfluidic Heat Sink for Ultra‐Efficient CPU Cooling via Millisecond‐Scale Bubble Transport 1.00
Laser-Based Sculpturing of Embedded Ultrathin Metal-Oxide Nanopores for Enhanced Biomolecular Sensing 0.40
Microfluidic Pumping of Artificial Microcilia Via Asymmetric Beating of Cardiomyocytes 1.00
Unveiling Acidophilic Secretin Nanopores for Ion Exclusion and Single‐Molecule Sensing 1.00
Electrically‐Controlled Multifunctional Double‐Emulsion Droplet Carrier Manipulation 1.00
4 4.00
Biomimetic Nanometer-Size All-Liquid Channels 1.00
2D Chitin Sub‐Nanosheets with Extreme Ion Transport for Nanofluidic Sensing 1.00
A Trilayer Nanofluidic Ionic Diode for High‐Performance Moisture‐Enabled Energy Harvesting and Ionic Logic Operations 1.00
Capillary‐Driven 3D Open Fluidic Networks for Versatile Continuous Flow Manipulation 1.00
22 21.29
Organic Macrocycle as Highly Selective Adaptor for Nanopore Sensing of Aromatic Carboxylic Acids in Oilfield Produced Water 1.00
An Alternating Modification Strategy for Constructing l-Cys–Au Functional Interfaces in Nanochannels for Highly Selective Copper Ion Analysis 1.00
Ag Plasmonic Nanopore-Enabled Single-Molecule SERS Identification of Amino Acids 1.00
Nanofluidic Photoelectrochemical Biosensors for Ultrasensitive Detection of Prostate Cancer Biomarkers 1.00
Flexible Organic Clip as an Adapter to Enhance Host–Guest Nanopore Single-Molecule Sensing 1.00
Dual Recognition and Highly Sensitive Detection of ATP by Aptamer-Bridged MOF Functionalized Glass Nanopipette 1.00
CLCtips: An Integrated Pipette-Tip Platform for High-Efficiency Extracellular Vesicle Proteomics via Aptamer-Mediated Capture and On-Tip Digestion 1.00
Engineering MOF-Assembled Nanochannels for Enantioselective Detection and Separation of Chiral Drugs 1.00
Real-Time Electrochemical Sensing Enabled by Nanoconfined Hydrogels in Solid-State Arrayed Nanochannels 1.00
Nanobubbles Affect Analyte Translocation through Glass Nanopores by Inducing Two-Stage Current Signals 1.00
Real-Time SERS Tracking of Single-Protein Orientational Change via Plasmonic Nanopore Confinement 1.00
Deterministic Co-encapsulation of Microparticles in Droplets via Synchronized Merging for Single-Cell Genomics 1.00
Self-Focused Acoustically Driven pL-Level Dispensing Pipet Enabling Rapid Concentration Gradient Generation 1.00
Dual-Mode Multi-Microphone Enhanced Photoacoustic Gas Sensing System Using a Waveguide Ring Array 1.00
Investigation on Droplet Heat Transfer Characteristics of Continuous-Flow PCR 1.00
Selective Capture and Addressable Release of Single Cells Enabled by Acoustic Resonator Integrated Serpentine Microchannel 1.00
Addressing Challenges in Fluid Flow-Induced Cell Membrane Oscillation by Nanopipettes 1.00
Ion Transport through Differently Charged Nanoporous Membranes: From a Single Nanopore to Multinanopores 0.83
On-Demand Injection of Microfluidic Droplets Based on Three-Dimensional Visual Feedback Control for High Volume Consistency and Precise Additive Concentration 0.79
Bipolar Ionic Diode with a Transformable Polyelectrolyte Network for High-Efficiency Ion Transport and Enhanced Sensitivity in Fluorescence-Based Heavy Metal Ion Detection 0.67
Droplet Impact-Based Microliter Viscometry 1.00
Nanochannels with Varied Outer Surface Charges for Protein Discrimination 1.00
1 1.00
Engineering Protein‐Based Nanofiltration Membranes with Sub‐Nanometer Pores via Amyloid‐Like Aggregation 1.00
1 1.00
On the stability of multi-dimensional rarefaction waves II: existence of solutions and applications to the Riemann problem 1.00
10 8.28
Multi-scale wake modeling based on physics-informed neural networks and transfer learning 1.00
The influence of wave steepness and age on wake dynamics and power performance of offshore wind farms 1.00
Multivariate modeling on wake-affected wind farms by two-stage hybrid graph neural network 1.00
Impact of hub height for enhanced performance of wind turbines under varying atmospheric stability 0.83
Numerical and experimental investigation of TPMS-structured cold plates for electronic device cooling 1.00
The role of nanotechnology and artificial intelligence in optimizing thermal energy systems 0.11
A data-physics hybrid-driven layout optimization framework for large-scale wind farms 1.00
A novel double-Gaussian full wake model for wind turbines considering dependence on thrust coefficient and ambient turbulence intensity 0.33
Design and performance investigation on adjustable ejector with petal spindle valve for high-power fuel cell adapted heavy-duty truck powertrain 1.00
A novel frequency-domain physics-informed neural network for accurate prediction of 3D Spatio-temporal wind fields in wind turbine applications 1.00
15 13.97
On-chip acoustic manipulation of single or arrayed microparticles via standing Scholte waves 1.00
Jet reversal in mixed bubbles induced by competing internal and boundary Kelvin impulse 1.00
The combined effects of viscoelasticity and shear-thinning on the flow characteristics of gel propellant in nozzle injectors 1.00
Shear-driven off-plane detachment of water drops from superhydrophobic surfaces 1.00
Viscoelastic effect on the wall pressure induced by tandem cavitation bubbles near a rigid boundary: A numerical study 1.00
High-throughput cell manipulation using low-frequency quasi-Scholte wave-based acoustofluidics 1.00
Coupled density–volume and solid–liquid interaction effects in the freezing dynamics of water droplets 1.00
Fiber-laser-induced cavitation: Transition from plasma formation to bubble nucleation 1.00
Lifetime of air bubbles detached from the freezing front during icing 1.00
Polarity-dependent discharge evolution in bubbled water under repetitive pulsed fields: From bubble-mediated initiation to polarity-controlled breakdown 1.00
Decoupling capillary force-viscous resistance trade-off by shape-gradient microgrooves wick design 1.00
On the criteria of jet types during a bubble collapse near the tissue-mimicking boundary 0.80
Topography for enhancing droplet levitation on a heated surface 0.17
A unified approach for truncated and extended adsorbed liquid films in evaporating menisci 1.00
Acoustically coupled reflectors for multiplexed wavefront engineering 1.00
6 5.48
A modification-free nanochannel platform for monitoring cerebral β-amyloid peptides based on the dispersion of stimuli-responsive polymer-modified gold nanoparticles 1.00
Plasmonic nanopore to monitor in-pore chemistry 0.48
A three-stage translocation model for revealing nanopore fingerprint signatures 1.00
Contact line dynamics modulated by electrode roughness determines bubble detachment size 1.00
Solid-state nanopore detection of metal ions ivia/i a DNAzyme–Catalytic Hairpin Assembly reaction 1.00
Programmable cation migration in unipolar 2D ion channels via dynamic Debye length 1.00
2 2.00
Outer-surface charge modulation of photothermal diffusion voltage enables ultrasensitive sensing in nanofluidic membranes 1.00
Exploring a solid-state nanopore approach for single-molecule protein detection from single cells 1.00
152 144.72
Computational Fluid Dynamics Study of the Aerodynamic Effects of a Utility-scale Photovoltaic Farm 1.00
A Novel 6DOF-SG-FOWT Model: High-Fidelity Wake Prediction of Floating Offshore Wind Turbine Wakes under Platform Motions 1.00
A Novel Double-Layer Manifold design for Uniform Cooling of Multiple SiC Power Modules 1.00
Laser-textured two-phase heat-sink surfaces with cavity-size matching and capillarity-dynamics coupling for high-flux immersion cooling 1.00
Impeller Blade Geometry Optimization and Energy Loss Reduction Mechanisms Based on Orthogonal Design and Response Surface Methodology 1.00
A LBM-FVM cross-scale coupling approach for the simulation of the atmospheric methane photocatalytic removal 1.00
Energy conversion mechanism in the runner during the pump-turbine startup transient process 1.00
Dynamic Mechanisms of Gas Hydrate Evolution in Hydrophobic Sediments: Wall-climbing and Secondary Formation 1.00
Physics-based modelling and coordinated control of pump interaction in distributed variable-speed pumping systems 1.00
A SCADA-informed evaluation method for wake-induced power losses considering the flow heterogeneity within large-scale wind farm 1.00
Impact of Pulsating Flow on Hydro-Thermal Performance of a Schwartz-D Heat Sink 1.00
Flow regimes identification of gas–liquid metal two–phase flow in vertical pipe using differential pressure signals and unsupervised clustering 1.00
A novel parallel bypass-ejector array design and optimization for efficient operation of multi-effect distillation desalination systems 1.00
Improvement of Internal Flow Characteristics, Pressure Pulsations, and Axial Forces in the Hump Region of Pump-Turbines Using a Non-Dominated Sorting Genetic Algorithm Combined with Multi-Resolution Dynamic Mode Decomposition 1.00
Unveiling the Transient Energy Flowpath in the Turbine Mode of Pump Shutdown: From Inertial Buffering to Irreversible Dissipation 1.00
Aerodynamic stability design of breakpoint structure for wind turbine blade 0.70
Numerical Study on the Influence of Variable-Speed Operation on Flow Stability During the Load rejection Process of Francis Turbines 0.83
Comparative research on the performance of three impeller seal clearance structures of pumped-storage units based on improved entropy production theory 1.00
Solid-Liquid Flow Characteristics of High-Head Francis Turbine with Splitter Blades 1.00
A modified actuator line model development for aerodynamic and wake analyses of a dual-rotor wind turbine under pitch motion 1.00
Experiment on aeroelastic stability and load characteristics of long flexible blades under parked condition 1.00
Influence of Bézier Curve based variable-speed control strategies on transient flow characteristics in pump-turbine under pump mode: A combined vortex dynamics and rothalpy analysis 1.00
Optimizing cavitation performance of a centrifugal pump: A hybrid approach of combining Random Forest and feature selection 0.86
Unsteady aerodynamic fluctuations and wake recovery of a floating offshore wind turbine subjected to yaw motions 1.00
A new anisotropic three-dimensional Gaussian wake model considering swirling effects for horizontal-axis wind turbine 0.80
Performance optimization of a dual-synchronous adjustable ejector for hydrogen recirculation in high-power fuel cell under variable load conditions 0.70
Enhanced energy harvesting in spacing optimized three-cylinder systems through coupled vortex-induced vibration and wake-induced galloping 1.00
Interface stability of gas bubbles in saline-aquifer compressed air energy storage: Heterogeneity-induced fingering evolution 0.80
Elongated bubble velocities in horizontal pipes with different viscous fluids and pipe diameters 1.00
Optimization of Liquid Droplet Injection in Steam Turbine Blades: Loss Reduction, Droplet Size Control, and Performance Enhancement 1.00
Insights into the impact of polluted moist air on transonic condensation flow to enhance compressor performance: experimental and numerical investigation 0.57
Characterization and experimental verification of wake model for offshore fixed wind turbines under wind-wave coupling 1.00
Study on the hydrodynamic characteristics of a six-nozzle ultra-large capacity Pelton turbine during the switching of the operating nozzles 1.00
Contrasting Dynamic Stall Characteristics: Airfoil Behavior in VAWT Kinematics versus Equivalent Planar Motions 1.00
Integrated CFD modeling and experimental validation of single- phase immersion cooling for data center thermal management 1.00
Hybrid Meta-Optimized GNN Network to Optimize Pitch Angle and Active Power of Wind Turbines for Reducing Fatigue Load 1.00
Comprehensive performance analysis of static mixers used in hydrogen-blended natural gas 1.00
Wind energy potential of a novel green building design: Three connected high-rise buildings with Y-plan layout 0.93
Enhancing canned motor pump performance in energy systems: A novel structure for particle wear mitigation and flow efficiency preservation 1.00
The investigation of flow mechanism and energy dissipation in multi-stage pump impeller based on energy balance theory 1.00
A flow field with superior rib-under mass transfer: Dual-boost for thermally regenerative flow battery output and thermoelectric conversion efficiency 0.70
Copper nanowires to enhance flow boiling at low mass flow 0.80
Study on the vortex dynamics and energy characteristics of the cone tip vortex under turbine operating conditions in low-head pumped storage systems 1.00
Synergistic two-variable data assimilation for enhanced turbine blade film-cooling predictions 1.00
Multi-Dimensional Performance Evaluation and Influencing Factors Study of Inter-chip Thermal Coupling in Immersion-Cooled Heterogeneous Multi-Chip Servers 0.71
Effect of fuel physical properties and pressure on the internal flow behavior of pressure swirl nozzle 1.00
A novel three-dimensional yaw wake analytical model and experimental validation using particle image velocimetry 1.00
Theoretical modeling of wall-proximity effect for vortex-induced vibration energy harvesting in tunnel 1.00
Experimental and numerical investigation of wet gas compression in a 4-stage dual-rotor compressor: Application for subsea natural gas transport systems 1.00
Numerical study on the effect of heterogeneous condensation in the primary nozzle on condensation flow and performance of steam ejector 0.70
Optimization Control Model for Wind Farms Considering the spatiotemporal dynamics of gusts 1.00
Effect of deflected jet on performance and cavitation characteristics of a Pelton turbine 1.00
High-fidelity IDDES simulation evaluating impacts of extreme wind conditions on wind turbine aerodynamic response and wake evolution 1.00
Wind speed correction under thrust similarity for an 18-MW FOWT: A wind-tunnel study 1.00
Optimization of the hump characteristics of pump-turbine based on response surface method and NSGA-III algorithm 1.00
Staggered Conical Rib Embedded Liquid Cooling Channel: Design and Optimization 1.00
Modeling and analysis of flow and heat transfer maldistribution in a supercritical CO2 hybrid mini-channel heat exchanger based on spatial thermal resistance networks 0.89
Flow pattern transition and void fraction prediction of oil-gas two-phase flow in a pipeline-riser system 1.00
Enhancing operational stability of an ultra-high-head pump-turbine using guide-vanes with horizontal blades 1.00
Research on gradient optimization design method for Q-H curve changes of nuclear reactor coolant pump based on energy loss analysis 1.00
Multi-task learning for gas-liquid two-phase flow through optical carrier microwave interferometry and autoencoder-multilayer perceptron architecture 1.00
Investigation of energy dissipation and flow behavior in the hump region of a pump-turbine 1.00
Study on evaporation and atomization characteristics of methanol in the side-wall air inlets pre-evaporation tube 1.00
Suppression of Hump Characteristics of Low specific speed Centrifugal Pumps by the Number of Impeller Blades Based on Entropy Production Theory and Energy Gradient Method 1.00
A graph theory-based modelling framework for thermal response analysis of polar ship superstructure with arbitrary compartment layouts 1.00
Analysis of impeller passage blockage effects on energy dissipation and flow fields in pumped cooling systems 1.00
Membrane-based liquid cooling strategy enabling sustainable high-heat-flux thermal management 1.00
Mechanism of Periodic Spray-Morphology Evolution of Heavy Aviation Fuel Driven by Gas-Liquid Coupling in an Air-Assisted Fuel Injection Premixing Chamber 1.00
Highly efficient bio-inspired manifold microchannel cooling for steady-state and transient thermal management of high-power chips 1.00
LES-based fluid-structure interaction analysis of wind turbines: wake interference effects and blade surface aerodynamics under variable spacing configuration 1.00
Research on the Conversion Mechanism between Cold and Hot Performance of Reactor Coolant Pump Based on Entropy Production Theory 1.00
Dynamic stall control scheme for wind turbines based on distributed dual synthetic jets 1.00
Partitioned Cooperative Distributed Control Strategy for Fatigue Load Reduction in Waked Wind Farm 1.00
Thermal performance analysis of an integrated solar-air composite heat pump system employing micro heat pipe array heat exchanger 1.00
Development of an OpenFOAM non-equilibrium condensation model for flow loss and performance prediction in steam transonic flows 0.67
An efficient optimization algorithm for active yaw control to increase wind farm power while considering load reduction 1.00
Quantitative Analysis on Surface Roughness Effects on Flash Boiling Internal Flow and External Breakup 1.00
Experimental investigation and mechanism analysis on the performance of a novel tab-nozzle ejector 1.00
Experimental benchmarking and refinement of nucleate pool boiling correlations to support low-grade waste heat recovery with heat pipes 1.00
High-efficient cooling from a counter-flow microchannel heat sink with sinusoidal wave walls for high-performance electronic devices 1.00
Three-dimensional Asymmetric Gaussian Wake Model of H-VAWTs based on field experiments 1.00
Flow instability and its effect on heat transfer in a sinusoidal wavy duct with rectangular cross section 1.00
Investigation of flow and heat transfer characteristics in a ribbed channel using grid-adaptive simulation method 1.00
Investigation of the impact of trapezoidal suction surface impeller on internal flow and energy conversion in side channel pumps 1.00
Quantification of 4D Spatial-Temporal Inhomogeneous Added Turbulence Intensity in Wake Region with Validations from LiDAR-based Observation 0.86
Bionic strategy enhances gravity adaptability of airborne latent heat storage 1.00
Coupled effects of 3D wake expansion and terrain anisotropy on downstream wind turbine power performance and fatigue load 1.00
Overcoming Theoretical Limitations in Small-Scale HAWT Analysis: A Novel Experimental-Data Fusion Approach and Revelation of Unsteady Flow Characteristics 1.00
Parameter optimization of drop contact cooling system for lithium-ion power battery for energy efficiency improvement 1.00
Data-driven characteristics and representation of vertical wind profiles in a mountainous region 1.00
Internal flow visualization and performance characteristics of a disc pump under gas-liquid two-phase flow conditions 0.90
Accuracy analysis and artificial neural network-based correction of ejector simulation considering nonequilibrium condensation 1.00
A three-dimensional dynamic wake prediction framework for multiple turbine operating states based on diffusion model 1.00
Micrometer-scale composite pin-fin diamond microchannel heat sink for near-10-kilowatt-level chip thermal management 1.00
Modeling and Performance Optimization of Non-Newtonian Hybrid Nanofluid Solar HVAC Systems with Magnetic Effects Using Neural Networks 0.25
Energy characteristics of transient rear cavity vortex in a spherical-casing nuclear reactor coolant pump 1.00
Role of wall roughness on energy dissipation and vortex dynamics in self-priming centrifugal pump: A study via entropy generation and Liutex vortex identification 1.00
A low-computational physics-guided deep learning model for wind farm flow control under time-varying wind conditions 1.00
Novel Impeller Modification for Erosion Mitigation and Efficiency Improvement for Renewable Energy–Driven Multistage Centrifugal Pumps 0.83
Aerodynamic response and wake evolution of floating vertical axis wind turbines under different motion modes and parameters 1.00
Study on wake interactions of tandem floating offshore wind turbines under different yaw conditions using actuator line method 0.90
Multi-objective topology optimization design of nanofluid cooling plate for thermal management of lithium ion battery pack 0.83
Simultaneous sensing of gas-liquid two-phase flow rate based on optical carrier microwave interferometry 1.00
Prediction of the severe slugging period in gas-liquid two-phase pipeline-riser systems using an artificial neural network 0.88
Numerical simulation of a center-water two-phase ejector with non-condensable gas 1.00
Investigation on formation, evolution, and performance impact of mixing layer in the zeotropic mixture ejector 0.70
Energy loss dynamic decomposition analysis under different working conditions in centrifugal pump 1.00
Application of TabPFN model on the energy performance improvement of high-power multistage centrifugal pump 1.00
Assessment of subsonic turbine cascade flow field and numerical viscous loss using the power-loss method 1.00
Predictions of Transient Pressure Pulsations in a Pump-Turbine from Measurements for Enhanced Flexible Operations 0.83
Research on Transient Performance Changes during the Non-Simultaneous Opening Process of Guide Vanes in Reversible Pump-Turbine Units in Pump Mode 1.00
Suppression of unsteady cavitation around oscillating hydrofoils using spanwise obstacles near trailing edge 1.00
Stabilization and heat transfer enhancement of nano-organic fluids in ORC systems: role of surfactant type and concentration in evaporation and condensation processes 1.00
Synergistic thermo-hydraulic optimization of embedded microchannels: Balancing chip cooling efficiency and pressure fluctuation resistance 1.00
Fluid–structure interaction simulation of the effect of static yaw control on the aerodynamic responses and wake characteristics of floating offshore wind turbines 1.00
Hybrid-PINNs approach for predicting high-fidelity flow and heat transfer in printed circuit heat exchangers of sodium-cooled fast reactors 1.00
Numerical prediction of the surge-induced response of a tidal twin-turbine system 0.86
Multi-parameter mechanistic study on the influence of vaporizer fuel atomization characteristics on combustor ignition and flame propagation processes 1.00
Research on the evolution law and energy loss characteristics of rotating stall in a pump-turbine under pump mode 1.00
Study on pressure pulsation suppression of large volute pump for energy storage based on transient calculation and collaborative optimization 1.00
Analysis of Aerodynamic Loads on Vertical Axis Wind Turbines Considering the Coriolis Effect 1.00
Wind farm layout optimization through multi-strategy differential evolution-based reinforcement learning algorithm 1.00
Effect of surface modification with copper nanowire arrays on nucleate boiling in a liquid cooler 0.83
Design and performance analysis of a multi-nozzle ejector with extended operating range for multi-effect distillation with thermal vapor compressor systems 1.00
Towards the integration of new-type power systems: Hydraulic stability analysis of pumped storage units in the S-characteristic region based on experimental and CFD studies 1.00
Analysis of the influence of blade attachments on the hydrodynamic behavior and energy performance of the tubular pump based on GPM and CFD 1.00
Artificial neural network analysis for entropy optimized flow of Jeffrey nanofluid invoking Cattaneo-Christov theory 0.13
Increasing waste heat recovery performance of a hexagonal thermoelectric generator with microchannels 1.00
Energy efficiency optimization of multistage centrifugal pumps based on blade loading control: Insights into flow instability suppression mechanism 0.76
Numerical Investigation of Inclined Sinusoidal-Corrugated Target Plates for Enhancing Flow and Heat Transfer in Jet-to-Crossflow Impingement System 1.00
Reduced-order variational Mode decomposition of transient flow fields in mixed-flow pumps during startup 0.83
Boundary Layer Dynamics and Power Performance of an Offshore Wind Farm during Unstable Ocean-Wave-Atmosphere Interactions 1.00
Metal oxide nanofluid-enhanced closed-loop pulsating heat pipes considering the characteristics of base solution: Thermal performance improvement for battery thermal management in cryogenics 1.00
Improving performance of twin counter-rotating vertical axis wind turbines under turbulent conditions: an integrated study using Taguchi method and large eddy simulation 1.00
Enhanced flow boiling heat transfer performance of diamond microchannels: An experimental study 1.00
Multi-parameter impact analysis of liquid-cooled battery cold plate in island wind-solar-Tidal energy storage system based on fuzzy gray correlation 1.00
Modelling and analysis of full-wavelength phase volume fraction measurement in liquid-solid two-phase flow 1.00
Optimization of Embedded Cooling in 2.5D Integrated Circuits through Genetic Algorithm-Driven TSV Layout Design 1.00
An active design method for high-precision heat transfer correlation 1.00
Energy performance improvement of mixed flow pump based on coupling of geometric and hydrodynamic parameters 1.00
A double Gaussian wake model for single and multiple yawed wind turbines 1.00
Dynamic stall modeling of the wind turbine blade with a data-knowledge-driven method 1.00
Transient simulation energy study of fast opening of guide vane during start-up of pump turbine in energy storage mode 1.00
Wind farm layout optimization based on dynamic Levy sparrow search algorithm: A multi-parameter analysis with active yaw control 1.00
Experimental study on dynamic response characteristics of ejector driven by periodic pulse excitation using fast Fourier transform method 1.00
Heat transfer dependence of power usage effectiveness of an augmented two-phase immersion cooling system for high-power servers 1.00
Complex dynamics of downwind floating offshore wind turbines due to tower shadow and platform motions 0.67
Performance Prediction of Flow Induced Vibration and Energy Capture for VIVACE Converter Improved by Maglev in Ultra-Low Velocity Zones 1.00
Numerical simulation and experimental study on cavitation and pressure fluctuation characteristics of low head pumped storage system under pump operating conditions 1.00
Analysis of Hydraulic Stability of a Francis Turbine Under Partial Load Conditions Based on Liutex Method and Entropy Production Theory 1.00
Multi-objective optimization of the TPMS-Fin three-fluid heat exchanger for vehicles using RSM-NSGA-III 1.00
An inclined groove and its optimization design method for improving the energy performance at the saddle zone of axial flow pumps 1.00
2 2.00
Pore-Size-Dependent Kinetics and Product Distribution of Fe(II)-Catalyzed Ferrihydrite Transformation 1.00
Combined Effect of Electrostatic Interaction and Steric Sieving during Ion Transport in Nanochannels 1.00
9 7.18
How Volume Increases the Mobility of Geophysical Granular Flow: A Unified Rheological Perspective 1.00
On the Rotation-Induced Pressure-Strain Correlation in Rotating Boundary Layer Flows 1.00
Fluid Stretching at Facies Interfaces Governs Solute Transport 0.20
Generative Subsurface Flow Modeling With Pretrained Diffusion Model and Training‐Free Knowledge Alignment 0.80
An Analytical Model for Evaluating the Hydraulic Conductivity of the Fracture-Conduit-Matrix System 1.00
Second-Order Degradation Modeling and Multiscale Feature Fusion for High-Fidelity Segmentation of Low-Quality Digital Rock Images 0.56
Enhancing Radial Displacement Efficiency of Non-Newtonian Fluids via Flow Rate Control 1.00
Exogenous and Endogenous Displacements in 3D Porous Media 0.88
Contact Angle Impacts on Multiphase Displacement in Fractured Porous Media: A Microfluidic Study 0.75
2 2.00
Microfluidics-Based Analysis of Controlled Mixing and Bubble Formation in Soda Solutions for Education 1.00
Oscillation Suppression of Acoustic Trapping: A Disturbance Observer-based Approach 1.00
6 5.65
Numerical analysis of non-equilibrium condensation and liquefaction capacity optimization in supersonic nozzles for carbon capture technology 1.00
Dual bionic strategies to resist erosion of pipe elbows considering fluid drag 1.00
A novel two-stage ejector with double bypasses for residual energy reutilization and performance improvement in multi-effect distillation systems 1.00
Sensitivity analysis of thermodynamic and phase change properties of water vapor and CO2 in non-equilibrium state for building clean energy systems 0.83
Pulse injection to suppress invasion front fingering: a clean technology to improve oil recovery from oilfields 0.81
Study on differential effects of supersonic separation technology in the decarbonization processes of two typical clean energy sources: Hydrogen and natural gas 1.00
7 5.58
Wettability of Rocks: Insights From an Electrical Double Layer Framework 0.70
Transport Properties of Dual‐Porosity Limestones: Laboratory Measurement, Critical Path Analysis Prediction, and Image‐Based Simulation 0.47
Hydraulic Conductivity Prediction of Pristine and Polymer‐Modified Bentonite‐Rich Porous Media via Molecular Dynamics 0.86
Quantifying Regime Transition of Mineral Precipitation in a Microfluidic Fracture 1.00
Hydrodynamic Erosion Phase Diagram and Bulk Permeability Evolution in Filled Rough‐Walled Fractures 1.00
Influence of Normal Stress, Shear Velocity and Materials on Steady‐State Shear Resistance and Viscosity of Rapid Dry Granular Flows 0.67
Insights Into Interfacial Dynamic and Displacement Patterns During Immiscible Two‐Phase Porous Media Flow Under Controlled Viscosity and Wettability Conditions 0.89
1 1.00
Holographic derivation of effective action for a dissipative neutral fluid 1.00
7 6.49
Sub-nm Pore Size Engineering in Metal–Phenolic Membranes 0.56
Multimodal Evaporation on Patterned Nanoparticle Arrays for Exhaled Breath Condensate Detection 1.00
Harnessing Entropic Effects from Interlayer Coupling to Modulate Ion Transport and Rectification in Multilayered Janus Graphene Nanopores 1.00
Regulating and Deciphering the Selective Synthesis of Metallacages in Microdroplets 1.00
Photoactivated Ion Transport: Role of Intrinsic Defects and Plasmonics for Efficient Ionic Power Harvesting 1.00
Concentration Energy Ion Channels with Molecular-Structure Dual Recognition for Sustainable Environmental Monitoring 0.93
Real-Time Recording the Dynamic Catalytic Heterogeneity of Enzymatic Reactions Using a Nanopore 1.00
5 4.33
The Mechanics of Drying Polymer Solutions Explain Observations of Humidity Insensitivity and Transient Buckling 1.00
Nonlinear Rheological Behavior of Dually Cross-Linked Elastomers on Start-Up and Cessation of Shear Deformation 0.70
Polymer Chain Conformation Triggers Electro-osmotic Flow in Uncharged Nanochannels 0.88
Influence of Arm Numbers on the Extensional Rheology of Entangled Star Polymer Melts 0.75
Interfacial Polarization and Electrorheology of Suspensions Containing Monodispersed Ellipsoidal Poly(ionic liquid) Particles 1.00
8 6.47
Synergistic Fluid Minilaboratory Incorporating Femtosecond Laser-Engineered Heterogeneous Dual-Component 1.00
Impurity-Induced Localized Superhydrophobicity Breakdown 0.33
Nonmonotonic Enhancement of Signal Gain by Outer-Surface Charge in Nanopores: toward Precise Single-Entity Detection 1.00
On-Demand Nanoliter Delivering Platform via Electrical-Activated Microdroplet Assembling 0.80
Magnetic Sensing of Ion Transport in a Single Nanopore 1.00
Segmentation of 2D Metal–Organic Framework Nanopores for the Detection of Single-Molecule DNA and Peptides 1.00
Polygonal Wrinkles in a Soft Solidified Droplet 1.00
The Electric Field in Solid State Nanopores Causes Dissociation of Strong Biomolecular Interactions 0.33
20 16.52
Suppressing acoustomigration and temperature rise for high-power robust acoustics 1.00
In-situ growth of biomimetic ion-selective membranes via confined molecular encapsulation for superior fluoride/chloride separation 0.88
Additive-mediated interfacial engineering of H2SO4-catalyzed isobutane alkylation from molecular design to industrial process intensification 1.00
When bubbles bounce or stick 1.00
Machine learning assisted single-molecule sensing towards standard-free quantification of per- and polyfluoroalkyl carboxylic acids 1.00
Bubble-burst-induced Puddle Jumping and Jet Printing 0.60
Harnessing acoustic topology for dynamic control of liquid crystal defects 1.00
High temperature evaporative cooler utilizing boiling suppression at water’s boiling point 1.00
Chemically gated artificial nanochannels for programmable subcellular signal modulated transport regulation 0.89
A nanofluidic oscillating neuron 1.00
Stochastic resonance of rotating particles in turbulence 0.07
Atomistic mechanisms of viscosity in 2D liquid-like fluids 1.00
Role of the real first interface in regulating ionic signal of nanochannels 1.00
Visualizing nexus of porous architecture and reactive transport in heterogeneous catalysis by deep learning computer vision and transfer learning 1.00
Particulate reshapes surface jet dynamics induced by a cavitation bubble 0.50
Rapid vortex ring bubble transport via bubble-pulsation of constrained underwater spark discharge 1.00
The limit of droplet rebound angle 1.00
Polymer microbubbles as universal platform to accelerate polymer mechanochemistry 0.08
Native globular ferritin nanopore sensor 1.00
A molecularly engineered large-area nanoporous atomically thin graphene membrane for ion separation 0.50
1 0.77
Capillary Leidenfrost effect 0.77
1 0.75
Attractor of hydrodynamic attractors 0.75
12 9.23
Dual Pathways of Air Cavity Evolution during Droplet Impact on Superhydrophobic Nanoporous Surfaces 0.55
Kinetics of Stacking-Order Evolution during Heterogeneous Ice Formation 1.00
Universal Percolation Threshold Mixing Law in Fractured Porous Media: Unifying Shape and Size Polydispersity and Dimensionality Coupling 1.00
Anomalous Transport of Elongated Particles in Oscillatory Vortical Flows 0.90
Separate Exact Laws of Kinetic and Magnetic Energy Cascade in Magnetohydrodynamic Turbulence 0.57
Emergent Turbulence in Nonlinear Gravity 0.17
Hydrodynamic Spin-Coupling of Rotors 0.17
Maximum Dissipation Reduction in Bulk Polymeric Turbulence 1.00
Power Spectra of Velocity Fluctuations in Granular Heap Flow 1.00
Emission of Acoustic Point Sources near an Interface 1.00
Wettability-dependent damping of droplet vibrations on solid surfaces 1.00
Spontaneous Capillary-Inertial Dewetting at the Microscopic Scale 0.88
5 3.85
Controlled assembly and sophisticated additive manufacturing of macroscopic droplets 1.00
Lab on an end: Micromanipulation using the acoustohydrodynamic pillar array as an end effector 0.79
Experimental evidence for the continuous transition between elastic and elastoinertial turbulence 1.00
Onset of cavitation and vapor bubble development over hydrophilic and hydrophobic surfaces 0.40
Micromechanical modeling of triphasic granular media 0.67
1 0.57
Launching by cavitation 0.57
8 7.41
Demonstration of topological acoustic tweezing for robust mass transport 1.00
Bioinspired wettability boundary stabilizes water sloshing 1.00
Selective ion transport of nonlinear resistive switching by hierarchical nanometer-to-angstrom channels for nanofluidic transistors 0.56
Biomimetic Janus MXene membrane with bidirectional ion permselectivity for enhanced osmotic effects and iontronic logic control 0.95
End-to-end inverse design for programmable acoustic tweezers with simultaneous force and torque control by metasurfaces 1.00
Topological-charge multiplexed metasurfaces for generating structural acoustic field and remote dynamic control 1.00
Effective negative depth in water waves 0.90
Sound-controlled fluidic processor 1.00
1 0.95
A multi-stage optimization framework for creating atmospheric boundary layer in wind tunnels with a short test section 0.95
5 4.83
Damping Oscillation Model on Light Levitating Microdroplet Evolution 0.83
Viscoelasticity and Sol–Gel Transition via Multiscale Self-Assembled Nanostructures in Short-Side-Chain PFSA Dispersions 1.00
Exotic Ethanol–Water Diffusion Mediated by Molecular Self-Assembly 1.00
Robust Noise Separation and Denoising of Ionic Current Signals for Nanopore Sensors Based on Independent Component Analysis 1.00
High-Sensitivity Detection of C-Peptide Biomarker for Diabetes by Solid-State Nanopore Using Machine Learning Identification 1.00
2 1.86
Analysis of the shear force caused by slug bubbles tracking in the hollow fiber membrane module 1.00
Minimising the bubble size through fluidic control of formation at a submerged orifice: The role of oscillatory inflow 0.86

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.