Manufacturing Engineering articles for Germany

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 37

Article ‘Count’ for Manufacturing Engineering.

Journal Count Share
3 0.69
Additive Manufacturing of Nanoscale Multimaterial Voxels Via Meniscus-Confined Electrodeposition 0.38
4D Printing of Silica Glass Microstructures Based on Capillary-Force-Assisted Assembly 0.08
Quantifying the Influence of Nanosheet Aspect Ratio on Network Morphology and Junction Resistance in Solution-Processed Nanosheet Networks 0.23
7 5.28
Three‐dimensional Antimony Sulfide Based Flat Optics 0.97
Positive-Tone Nanolithography of Antimony Trisulfide with Femtosecond Laser Wet-Etching 0.82
Mechanical Properties of Architected Polymer Lattice Materials: A Comparative Study of Additive Manufacturing and CAD Using FEM and µ‐CT 0.50
Analysis of the Electrochemical Stability of Sulfide Solid Electrolyte Dry Films for Improved Dry-Processed Solid-State Batteries 1.00
Soft and Stiff 3D Microstructures by Step‐Growth Photopolymerization Using a Single Photoresin and Multi‐Photon Laser Printing 0.83
Composition and Resulting Band Alignment at the TiO2/InP Heterointerface: A Fundamental Study Combining Photoemission Spectroscopy and Theory 1.00
Vat Photopolymerization of High Molecular Weight Polymer Latexes with Pseudothermoplastic Properties for Recyclability 0.15
7 3.84
Wavelength‐Dependent 3D Printing: Introducing 3D Printed Action Plots 0.11
Quasi-2D Morphologies of a Non-Fullerene Acceptor Y6 by Interfacial Assembly via Langmuir–Schaefer Technique 0.94
Additively Manufacturable High‐Strength Aluminum Alloys with Coarsening‐Resistant Microstructures Achieved via Rapid Solidification 0.18
High‐Precision 3D Doping of Fused Silica Glass Derived from Nanocomposites 1.00
Deep Eutectic Inks for Multiphoton 3D Laser Microprinting 1.00
Catalytically Active Light Printed Microstructures 0.53
Revealing the Degradation Mechanism of Lithium‐Ion Batteries for Electric Aircraft 0.08
1 0.20
Efficient and Wide Chemical-Space Ionization of Organic Contaminants Using LC–MS with a Miniaturized Plasma Source Applying Different Discharge Gases 0.20
3 2.13
Synergistic Two-Color Photochemical Polymer Network Formation and Lithography 0.96
Step Test for Rapid Screening of Material and Process Parameters for Resin Development in DLP 3D Printing 1.00
Surface Reforming of Hard Carbon During Battery Rest for Enhanced Sodium Storage 0.17
1 1.00
How do companies manage energy? A systematic literature review on energy cost accounting, energy efficiency, and energy management 1.00
3 0.78
Surface-localized magnetic order in RuO2 thin films revealed by low-energy muon probes 0.47
Discharge similarity in capacitive radio frequency carbon tetrafluoride plasmas 0.20
Enhancement in tunnel magnetoresistance for magnetic tunnel junctions in Mn based Heusler compounds 0.11
1 0.17
Cold argon plasmas for non-enzymatic digestion of macromolecules 0.17
2 0.60
Near-Infrared Photothermal Metal–Organic Framework for Ultralow-Power-Density Laser Ablation and Direct Patterning 0.10
Air-Sinterable Copper Precursor Inks via Mixed Bidentate/Tridentate Ligands: Synergistic Oxidation Resistance and High Conductivity 0.50
1 1.00
Overcoming Thermal Degradation during Continuous Conversion of Water into Hydrogen Peroxide in a Flexible Plasma Reactor 1.00
1 0.50
Optofluidic three-dimensional microfabrication and nanofabrication 0.50
5 2.60
Mechanofusion-derived cathode composite microstructures with scalable mixed conducting matrix coatings for solid state batteries 1.00
Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond X-ray free-electron laser pulse 0.29
In-situ nano-reprecipitation enables superior cryogenic mechanical properties in a 3D printable medium-entropy alloy 0.24
Achieving high strain hardening and strength in an additively manufactured titanium alloy 0.08
Additive manufacturing of multi-material and hollow structures by Embedded Extrusion-Volumetric Printing 1.00
1 0.42
Femtosecond-Laser-Delamination Cavities for Resonant Acousto-Magneto-Plasmonics 0.42
1 0.17
Spontaneous Coulomb fissions of drops on lubricated surfaces 0.17

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.