Chemical Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 5442

Article ‘Count’ for Chemical Engineering.

Journal Count Share
157 145.91
Taming the Temperature Extremes: An Entropy-Regulated Electrolyte for Wide-Temperature Lithium-Ion Batteries 0.91
Electro-Chemo-Mechanical Coupling Effects of Al2O3 Coatings on Separators in High Energy Density Lithium Metal Batteries 1.00
Roll-to-Roll Scalable Manufacturing of Nanoporous Separators for High-Safety Lithium-Ion Batteries 0.95
Design Grain Boundary Strengthening Phase for Enhanced Stability and Ionic Conductivity in Nickel-Rich Cobalt-Free High-Entropy Layered Oxide Cathodes 1.00
Cascaded Spatial Confinement Enables Simultaneous Ultrahigh Energy and Power Densities in Planar Micro-Supercapacitors 1.00
A Molybdenum Carbide Mixcrystal Structure with Synergistic Catalytic Activity for Accelerating Sulfur Redox Reactions in Lithium–Sulfur Batteries 1.00
Surface-Confined Lithium Plating Enabled by Externally Anchored MgF2 Nanodots on Hollow Carbon Spheres for Dendrite-free Anodes 1.00
A Natural Clay LiNO3 Solubilizer for Stabilizing Lithium Metal Batteries 1.00
Intercalation Engineering Synthesizes MoS2 Cathodes Rich in the 1T Phase To Achieve Stable Cycling for Aqueous Aluminum-Ion Batteries 1.00
Engineering of Closed Pores and Transport Channels in Polymer-Derived Hard Carbon via Chemical Vapor Deposition for Sodium-Ion Batteries 1.00
Overcoming Passivation–Corrosion Dilemma of Al Current Collector for Aqueous Zn Battery 1.00
Rapid Thin-Film Evaporation with Nanoscale Transport Empowers Efficient Water–Energy Harvesting from Seawater 1.00
Deep Eutectic Solvent–Water Interfacial Polymerization: A Scalable Route to Tailorable Covalent Organic Framework Membranes 0.86
Dual-Electrode-Functional Covalent Organic Polymer Designed by a Capacity-Voltage-Related Descriptor for Superior and Antifreezing Lithium/Sodium Storage 1.00
Lithophilic yet Inert Interfaces Strategy for Stable Lithium Metal Anodes 1.00
Thermocatalytic Upcycling of Plastic into Ni-Encapsulated Carbon Nanotube Electrocatalysts for Green Hydrogen Production 1.00
Nanoheterocrystal Catalysts Designed by Multiple Reactivity Descriptors for Accelerated Redox Kinetics in Li–S Batteries 1.00
Realizing ≥99.9% Li Plating/Stripping Coulombic Efficiency in a Solid-State Li Metal Battery via Constant Interfacial Contact-Targeted Zero-Volume-Change Host Design 1.00
Ordered Armor Engineering Enabling Ten-Ampere-Level Performance for Anion Exchange Membrane Water Electrolyzers under an Ultrathin Membrane 1.00
Phase-Engineered 1T/2H-MoS2 Heterostructures for High-Conversion-Efficiency Lithium-Ion Photobatteries 1.00
Overcoming the Trade-Off between Initial Coulombic Efficiency and Rate Performance in Hard Carbon Anodes for Sodium-Ion Storage 1.00
Micro-Nano Cavity-Engineered Graphene Phase-Change Composite Film for Bifunctional Thermal Management in Electronics 1.00
Structure Engineering of Coal Pitch-Derived Hard Carbon by Molecular Locking and Multi-Stage Pore Forming for Enhanced Sodium Storage 1.00
A Simple Disinfection Device for Families in Underdeveloped Regions 1.00
Energy-Harvesting Evaporator Mimics Photosynthesis-Respiration Cycle and Enables All-Day Seawater Desalination 1.00
Atomic-Level Intercalation Strategy Enabling Ultrastable Subnanochannels for Long-Lifespan Zn-Ion Batteries 1.00
Geometric Matching Effect of Tetrahedral Cation Adsorption Enables Reliable Interfacial Engineering toward Stable Aqueous Zinc-Ion Batteries 1.00
Full-Density TiB2 Cathodes for Energy-Efficient Aluminum Electrolysis via Oriented Assembly in Molten Salts 0.75
Grain Boundary Triggered Basal Plane Active Sites in Mn-Doped Pd Nanosheets for Boosting Oxygen Reduction Reaction 1.00
Salt-Free Glycine Electrosynthesis via Carbon–Nitrogen Coupling Boosted by the Lattice Strain in Atomically Thin p-Block Bismuthene 0.56
Deciphering Metastable Structure Evolution in Voltage Hysteresis of Lithium-Rich Cathodes 0.85
Effect of Stoichiometry in Mo-Based Ordered Double Transition Metal Carbide MXenes on Solid Lubrication and Tribo-Film Formation 0.17
Bilateral Nitrogen Interface Chemistry for Dendrite-Free Zinc–Iodine Batteries with Enhanced Four-Electron Redox Activity 1.00
Unravel Electrolyte-Dependent Interphase Structures in Lithium-Sulfurized Polyacrylonitrile Batteries via Cryogenic Transmission Electron Microscopy 1.00
Low-Self-Discharge Nanoconfined Hydrogel Electrolyte for Stable High-Energy-Density Aqueous Zinc–Iodine Batteries 1.00
Passive Cooling Enabled Enduring Electricity Generation with a Single Water Droplet under Solar Exposure 1.00
Machine-Learning-Guided Chemical Metathesis for In Situ Construction of High-Entropy Alloy Interphases in Li-Metal Batteries 1.00
Frustrated Lewis Pairs on Porous Ceria Nanorods Drive Low-Temperature Dimethyl Carbonate Hydrogenation to Methanol 1.00
In Situ Colloidal Electrolyte via Anion–Polycation Interaction Enables Stable Zn Metal Batteries 1.00
Zeolite-Filled Glass Fiber Separator Enables Ah-level Zinc Ion Batteries via Synergistic Dual-Electrodes Regulation 0.86
Dual-Gradient Engineering of Elemental Concentration and Crystalline Architecture Enables High-Performance Ni-Rich Layered Oxide Cathodes 1.00
Intermolecular Hydrogen Bonding Mediated Micropore Activation and Structure Disorder in Hard Carbon for High-Capacity Sodium Storage 1.00
In Situ Transformed Organic Redox Molecules for a Hydrogen Battery Operated at −70 °C 1.00
Anti-Perovskite-Tip Dendritic Structure to Enable Separate Catalysis–Deposition Mode for Polysulfides in Li–S Batteries 1.00
Controlling Radical Pathways via Valence Engineering of Rh/TiO2 for Selective Jet Fuel Synthesis from Biomass 1.00
Full-Process Proton Management Unlocks Long-Life Aqueous Zinc-Metal Batteries 0.71
Liquid-Crystalline MXene Inks Enable Stack-Free Thick Electrodes for High-Performance 3D-Printed Micro-Supercapacitors 1.00
Regulated Electrolyte Solvation Enables Rapid Charge Transfer for Red Phosphorus Anodes toward High-Performance Potassium Batteries 0.88
Breaking the Energy Linear Relationships between C≡C and C═C Bonds over Porous Intermetallic Pd2Ga Metallene Boosting Alkynol Semihydrogenation 1.00
Low-Strain Cathode via Electrochemical Conversion for High-Power and Durable Aqueous Zinc-Ion Batteries 1.00
Electrolyte Engineering via Nucleophilic Anion Design: Lithium Pentafluoropropionate Enabling Dendrite-Free High-Performance Lithium Metal Batteries 1.00
Regulating Solvation Structure and Ion Transport via Lewis-Base Dual-Functional Covalent Organic Polymer Separators for Dendrite-Free Li-Metal Anodes 1.00
Multianion Synergism Boosts High-Performance All-Solid-State Lithium Batteries 1.00
Intermolecular Hydrogen-Bond Network Boosts Lithium-Bonding Kinetics in Solid-State Lithium Metal Batteries 0.96
Topological and Physicochemical Origins of the Preferential Lithium Solvation of Organic Additives in Aqueous Electrolytes 1.00
A Heterogeneous Host Intercalation-Customized Efficient Dual Electrode–Electrolyte Interphase for Self-Enhanced Aqueous Zinc Metal Batteries 1.00
Crystal Facet Engineering Induces Polarization Electric Fields to Improve the Overall Performance of Lithium–Sulfur Batteries 1.00
Enhancing Proton Delocalization in Non-Sulfonated Membranes through Coupled Electron-Withdrawing Groups for High-Temperature Fuel Cells 1.00
Functionalized Separator with Integrated Mass Transfer Selectivity and Kinetics Regulation toward Durable Zn Anodes 1.00
Decoupling the Trade-Off between Mechanical Properties and Ionic Conductivity in Hydrogel Polymer Electrolytes by Anomalous Water-Induced Microphase Separation 1.00
Self-Encapsulated 2D Electrenes: A Promising Platform for Various Emergent Properties 1.00
Quantifying and Inhibiting Manganese Dissolution in Li-Rich Mn-Based Cathode Materials 1.00
Defect-Engineered Ultrathin Zeolitic Imidazolate Frameworks-8 Membranes: Unlocking Ultrafast Water Transport and Precise Molecular/Ionic Sieving 1.00
Synergistic Effects of Porous Dilute Multicomponent Cu-Based Solid Solutions in Li-Metal Batteries: In Situ and Theoretical Studies 1.00
Robust Bioinspired Microcellular and Micro-Nanochannel Photothermal Aerogels for High-Efficiency Atmospheric Water Harvesting 1.00
Synergistic Adsorption-Catalysis by Co/Ce Dual Single Atoms Trapped in Hollow Carbon Spheres Boosts Li–S Battery Performance 1.00
Self-Assembled o-Carborane Clusters Enabling Ambient/Electrochemical Dual-Stable Interphases for Dendrite-Free and High-Rate Lithium Metal Batteries 1.00
Synergistic Pore Architecture and Surface Lithiation Enable Li3PO4-Dominated Interphases for Ultrahigh-Rate Graphite Anodes 1.00
Unlocking Interlayer Confinement Enables All-Slope Hard Carbon with Ultrafast and Highly Reversible Sodium Storage 0.92
Elucidating the Role of Porous Zn Anode in Improving Zn Nucleation and Growth Behavior for Aqueous Zn-Ion Batteries 1.00
Enabling Bottom-Up Li Deposition: A Smart Pore-Size/Lithiophilicity Dual-Gradient Three-Dimensional Host 1.00
Janus-Faced MgI2 Interface Engineering Enables Stable High-Capacity Poly(ethylene oxide)-Based Lithium Batteries 1.00
Magnesiothermically Synthesized TiO-Decorated 3D N-Doped Graphitized Porous Carbon as a Multifunctional Sulfur Host for Li–S Batteries 0.22
Local Microenvironment-Induced Dynamic Self-Adaptation for High-Performance Ammonium-Ion Batteries 1.00
Synergistic Regulation of Li-Ion Transport and Crystallographic Orientation via Lanthanum Iodide for High-Performance Lithium Metal Anodes 1.00
High-Entropy Induces Self-Limiting and Controllable Surface Coherent Phase Achieving Exceptional Ah-Level Ni-Rich Co-Free Batteries 1.00
Engineering MnS Cathodes via Full-Voltage H+/Zn2+ Coinsertion and Synergistic Carbon Dot Regulation for Zinc-Ion Storage 1.00
Laser-Induced NiFeOx Nanolayer Enables Durable and Efficient Seawater Electrolysis at Industrial Current Densities 0.25
Nanoconfined MXene/Cellulose Membranes for Selective Lithium Extraction from Brines and Black Mass 0.23
Nanophase-Separation Heterogel Photoiontronics for Bidirectional Ion-Gradient Energy Conversion Modulation 1.00
Defective Interface Customizes Anion-Aggregated Helmholtz Plane for Anode-Less Lithium Metal Batteries 1.00
Constructing Heterotransition Metal Ligand Field Clusters with a Compact Spatial Structure for Maintaining Unimpeded Sodium-Ion Migration 0.94
Competitive Additive-Strategy Modulating Superaerophobic/Superhydrophilic Porous Copper for Enhanced Liquid Replenishment and Gas Evolution 1.00
Triple-Site Integrated Redox-Active Metal–Organic Cages Enable Complementary Acceleration Mechanisms for Serially Enhancing Sulfur Redox Kinetics 1.00
Regulating Interfacial Nucleophilic Chemistry via Hybrid Electrolyte Enables Stable 4.8 V-Class Li-Rich||Li-Metal Batteries 1.00
High-Performance Fenton-like Catalysis through Metal–Organic Framework-Derived Nanoporous Carbons for Continuous Cleavage of Polysaccharides 1.00
Carbothermal Synthesis of High-Entropy Layered Oxides for Advanced Submicron-Particle Lithium Cathodes 0.14
Dual-Topology-Driven Oxygenated Lattice Memory and Carbon-to-Oxygen Substitution Enable Graphite-like Subcrystalline Carbon for Na-Ion Batteries 1.00
Orchestrating Site-Specific Redox Catalysis via Dual-Atom Engineering for Enhanced Polysulfide Conversion in High-Performance Li–S Batteries 1.00
Mammal-Skin-Inspired Adaptive Nanocomposites Cooling Membrane for Passive Battery Thermal Management 1.00
Hierarchical-Morphology Lignocellulosic Thermostat for High-Efficiency Thermal Management 0.95
Synergistic Bulk/Interface Engineering Enables Stable 4.6 V Cycling of LiCoO2 in Quasi-Solid-State Li-Ion Batteries 1.00
Spatial Expansion of Catalytic Domains via Light-Driven Solid–Liquid Synergy for Advanced Li–S Batteries 1.00
Hybrid Coating on Sulfide Electrolytes via Lithium Salts Additive for Stable All-Solid-State Lithium Metal Batteries 1.00
Chain-Transported Hypercoordinated Chloroaluminate Electrolyte for Solid-State Aluminum-Ion Batteries 1.00
Cathode Design via Iron-Coordinated Covalent Organic Frameworks Facilitating Four-Electron Transfer to Achieve High-Capacity Aqueous zinc–iodine Batteries 1.00
Hydrophilicity and Zincophilicity Coincorporated Zwitterionic Additives for High-Performance Zinc Metal Batteries 0.44
High-Power Polysulfide Redox Flow Batteries via an Interfacial Electron Field on a 2D Mesoporous Heterojunction 1.00
Spatial Confinement in Structural Biomimetic Catalysts: Enhancing Sulfur-Chain Homolysis and Enzyme-like Activity for High-Performance Lithium–Sulfur Batteries 1.00
Cathode Engineering Enables Robust Interface Contact for High-Performance All-Sulfide-Based Li-SeS2 Solid-State Batteries 1.00
Vertically Aligned Mesoporous Arrays Catalyzing Long-Chain Polysulfide Conversion to Unlock High-Energy Magnesium–Sulfur Batteries 1.00
Synergetic Structural Optimizations of Zinc Anodes and Electrolytes to Enable Zinc–Iodine Batteries with Excellent Low-Temperature Performances 1.00
Ultraselective Amino–Phenolic Nanofiltration Membranes via Enzyme-Mediated Decoupling of Diffusion and Reaction 0.86
Synergistic Suppression of Dissolved Oxygen and Proton Corrosion on Zinc Anodes by the Glutathione/Oxidized Glutathione Redox Couple 1.00
3D-Printed Hierarchically Porous MOF-Derived Cathodes for Realizing High-Performance Flexible Quasi-Solid-State Aqueous Zinc–Cobalt Batteries 0.83
Built-In Electric Field Augments Hypersalinity Resistance of Heterostructured Metal Oxides for Efficient Fenton-like Catalysis 1.00
Strain-Induced Distortion of MXene Nanosheets Enabling Freestanding Electrodes with Linearly Upscaling Areal Capacitance at Ultrahigh Mass Loadings 1.00
Highly Stable and Multifunctional ZnNi Alloy Nanoarrays for Long-Life Anode-free Lithium Metal Batteries 1.00
Synergistic Multi-Field Regulation via MOF–Polymer Hybrid Separators Enabling Dendrite-Free and Thermally Stable Lithium Metal Batteries 1.00
Uncovering the Effect of Crystallinity on the Pseudocapacitive Behavior of Li+ Storage on Disordered Rock-Salt Vanadium Oxide 1.00
Restructuring Hydrogen Bond Networks in Polyacrylamide Hydrogels via Trehalose Additives for Wide-Temperature-Range Zn-Ion Batteries 0.82
In Situ Polymerized Hybrid Nanofiber Membranes Boost High-Voltage Stability of Solid-State Lithium Metal Batteries 1.00
A Multifunctional Interlayer Enhancing Water Tolerance in Rechargeable Lithium Batteries 1.00
Continuous Lisup+/sup Coordination Polymer Electrolyte for Fast Lisup+/sup Migration, Stable Electrolyte Interphases, and Safe Quasi-Solid Lithium Metal Batteries 0.90
Activated Zn2+ and NH4+ Storage in MoS2 via Homologous Substitution with Highly Electronegative Elements 1.00
Honeycomb Organogel-Fabric for Osmotic Pressure-Driven Atmospheric Water Harvesting 0.80
Construction of MoS2/MoO3 Heterostructure with Ultrafast-Charged and Superior Low-Temperature Sodium Storage Properties 0.67
Dual-Platform Single-Molecule Redox-Targeting Reaction in Neutral Anthraquinone Flow Batteries 1.00
Manipulating Bilateral Interface Chemistry via Multifunctional Salt Additive for Durable Aqueous Zinc Batteries 1.00
Regulating Electronic Structure and Coordination Environment of Transition Metal Selenides through the High-Entropy Strategy for Expedited Lithium–Sulfur Chemistry 0.77
Probing Domain-Boundary-Induced Structural Degradation in Single-Crystalline LiCoO2 by Nanoscale Imaging 0.73
Regulating the Polysulfide Behavior by a Large-Scale Two-Dimensional Superlattice Interface in Li–S Chemistry 0.88
Mimicking the Peptidyl Enzyme Enables Polysulfide Electronic Axial Stretching Catalysis for Lean-Electrolyte Lithium–Sulfur Batteries 1.00
A Bioinspired Gradient Hydrogel Electrolyte Network with Optimized Interfacial Chemistry toward Robust Aqueous Zinc-Ion Batteries 1.00
Triggered Photoexcited Electrons Transfer and Spin Polarization through 3dx2–y2–2pz Orbital Hybridization for Synergistic Solar-Thermal/Photocatalytic Water Purification 1.00
Evapolectrics: Direct Harvesting of Electricity from Evaporation Using Thermoelectrics 0.50
Nanoscale Thermal and Mechanical Responses of Lithium Fluoride in the Solid Electrolyte Interphase under Coupled Temperature and Pressure Conditions 1.00
High Volumetric Capacity FeS2/SPAN Composite with Promoted Kinetics for Li–S Battery 1.00
Atomic-Level Asymmetric Regulation of Co–N3S1 Catalysts Accelerates Polysulfide Trapping and Conversion in Lithium–Sulfur Batteries 1.00
Disrupting the Spatiotemporal Coupling of Side Reactions via Zn-Centered Covalent Organic Polymer Enables Highly Reversible Zn Metal Anodes 1.00
Ca2+-Preintercalated V2O5 as a Dual-Function Cathode Additive for Polyiodide Anchoring in Zn–I2 Batteries 0.20
Electric-Symmetric-Breaking in Cu Single-Atom Catalysts for Enhanced Acetylene Hydrochlorination 1.00
Electronegative Co-WO2 Interface with Li+ Pump Effects for Efficient Polysulfide Conversion in High-Performance Li-Sulfur BatteriesClick to copy article link 1.00
Polyporphyrin-Modified Hierarchical Framework Interface Layer Facilitates Highly Stable Microcrystallized Surface for Zn Anode 1.00
The Regulation of Ion Transport Microenvironment in Micropores to Precisely Construct Porous Polymer Electrolytes for Solid-State Lithium–Metal Batteries 1.00
Data-Assisted Design of Temperature-Resistant Weakly Solvating Electrolyte for All-Climate 500 Wh/kg Lithium-Metal Batteries 1.00
Turing Membranes Regulated by Intermolecular Hydrogen Bonding for Molecular Sieving 1.00
Synthesis of Ti2CO2 MXene and Its Application in Photoelectrochemical Biosensors with Ultrahigh Sensitivity and Long-Term Stability 0.88
Elucidation of the Sodium-Ion Storage Behaviors in Hard Carbon Anodes through Pore Architecture Engineering 0.79
Electron-Initiated Self-Growth In Situ Hydrogel Electrolyte with Gradient Protection Interface Enables Stable Zinc Metal Batteries 1.00
Fully Lithiated LixTiO2−δ Layer Coated Separator for Securing a Lithium-less Anode in an Ester-Based Electrolyte 0.88
Hybrid Nanofiber-Based Atmospheric Water Harvesters: Sunlight-Driven Operation in Low-Humidity and Low-Illumination Environments 0.69
Confinement-Regulated Lamellar Interphase with Enhanced Dielectric Environments for Lithium Metal Batteries 1.00
Spin State Modulation via Magnetic Fields in Fe Single Atom Catalysts for High-Performance Aqueous Zinc–Sulfur Batteries 0.64
Multifunctional Fully Biomass-Derived Bilayer Aerogel for Efficient Solar-Driven Desalination and Thermoelectricity Generation 1.00
Stabilizing Benzoquinone Cathodes via a Nanopore-Confined Dual-Site Mechanism for Aqueous Zinc Batteries 1.00
Spatiotemporal Coordination-Engineered Core–Shell Zeolitic Imidazolate Frameworks Enable Self-Adaptive Electrocatalyst Reconstruction and Self-Tandem Sulfur Conversion 1.00
Alternant P-Type/N-Type Conjugated Bipolar Copolymer Cathodes for Advanced Aqueous Zinc-Ion Batteries 1.00
Designing a Self-Extinguishing System in a Composite Electrolyte for Highly Safe Solid-State Lithium Metal Batteries 1.00
Anion Redistribution in Solvation Structure Enables a Stable Graphite Cathode in Dual-Ion Batteries 1.00
Combining a Pd Cluster and a Built-in Electric Field as a Biomimic for Stable C–Cl Bond Polarization 1.00
Tunable Hydrated Channels in Covalent Organic Framework Membrane for Seawater Desalination 1.00
Nanozeolite-Driven Gear-Catalysis Enabling Sequential Methanol-to-Aromatics Conversion 0.92
Atomic-Scale Interface Engineering to Construct Highly Efficient Electrocatalysts for Advanced Lithium–Sulfur Batteries 0.80
Enabling I3–/I2 Redox Couple toward High-Voltage Zn-Polyiodide Batteries by the Iodide–π Conjugation Effect 0.97
Strengthened O–H Bonds in an Aqueous Electrolyte for Nonflammable Li-Ion Batteries 1.00
Targeting Acceleration of the Rate-Determining Step in Sulfur Redox and Dendrite-Free Lithium: Heterointerface and Electron Structural Engineering 0.86
750 712.14
Encapsulated Nanoconfined Microenvironment and Fluorine Coordination Boost Selective Peroxymonosulfate Activation Toward Co(IV)=O Dominated High-Efficiency Pollutant Degradation and Biotoxicity Abatement 0.88
Gas Diffusion Layer with Multiscale Roughness Structure for Enhanced Durability of Gas Diffusion Electrode 1.00
Heterodimensional Interface Engineering in Phase Change Regulator for Thermal Buffering and Microwave Dissipation 1.00
Insights Into 1, 2-Dimethoxypropane Mediated Dissolution of Low-Solubility LiNO3 in Carbonate Electrolytes Toward High-Voltage Lithium-Metal Batteries 1.00
In situ Interlock Interface through Facial Makeup of Quasi-Solid Electrolyte with Silver Gauze Enabling Uniform Lithium Nucleation and Tip Potential Distribution 1.00
Unraveling the Carbonyl Charge-Storage Mechanism in Conjugated Carbonyl-Based Organic Electrodes for High-Performance Aqueous Zinc-Ion Batteries 1.00
Unlocking Ultra-Stable 100% DOD/DOC Zinc-Based Flow Batteries via Synergistic Structural and Solvation Engineering for Facilitated Dead Zinc Revitalization 0.90
Synergistic Piezoelectric-Field and Crystal Plane Manipulation in Composite Solid Electrolytes Toward High-Rate Zinc Metal Batteries 1.00
Solvation Engineering via Cation-Polyanion Synergy for Ultra-Stable Seawater Zinc Batteries 1.00
Microfluidic-Directed Photothermal Gel-Granule Ensembles with Highly Programmable Structures and Functionalities 1.00
Hyperbranched Dual‐Cation Anion Exchange Membranes With Interconnected Ion Transport Channels for Fuel Cells 1.00
Lightweight and High-Strength Phase Change Composites Based on 3D-Printable Pickering Emulsions 1.00
Tautomerization-Switched Anion-π Interactions Enable High-Performance Solid-State Lithium Metal Batteries 1.00
Tailoring MOF Separator with Enhanced Lithium‐Ion Desolvation for High Sulfur Redox Kinetics in Lithium–Sulfur Batteries 1.00
Hygroscopic Ion-Gel Strategy Enabling Self-Assembled Polysaccharide Fibers for Sustainable PV Cooling and Water Harvesting 0.78
Selective Regulation of Cation Segregation in Perovskite: Interlayer High‑Entropy Design Toward Active and Durable Electrodes for Solid Oxide Cells 1.00
Energy-Preferring Mechanism Competition in Molecularly Programmed Hard Carbon for High-Plateau-Capacity Sodium-Ion Batteries 0.80
Structural and Chemical Channel Engineering Enables Regulated Cation-Anion Kinetics in Crystalline Quasi Solid Electrolytes 0.91
An Oriented Cu3(HHTP)2@GO Free-Standing Cathode With Ultrafast Zn2+ Kinetics for High-Capacity and Durable Flexible Aqueous Zinc-Ion Batteries 1.00
Engineering Intelligent Graphene Oxide‐Cellulose Membranes: Suppressing Thermal Runaway for a Safer Aqueous Zinc‐Ion Batteries 0.50
Synergistic Interface Engineering in Co3N/Co Heterostructure Enhances Catalytic Dehydrogenation of Formic Acid 1.00
A Robust Pomegranate-Like CuSn@N,O-C Anode for Superior Sodium-Ion Storage 0.86
Ultrafast Anion Storage of a High Voltage Cathode Enabled by an Integrated Donor–Acceptor and 1D COF Nanochannel Architecture With 40 000 Cycle Durability at 60 C 0.80
Manipulating Quasi‐Solid‐State Sulfur Conversion in Room‐Temperature Na─S Batteries 1.00
σ-Hole Interaction-Driven Enrichment-Catalysis Cascade Reaction in Covalent Organic Cages Enables Ultrahigh-Rate Li-Br2 Batteries 1.00
Aniline‐Oligomer‐Assisted On‐Site Growth of Cationic Polyurethane Foams for High‐Efficiency Solar Desalination 1.00
Manipulating the Water-Deficient Inner Helmholtz Plane toward Highly Reversible Zinc Batteries 1.00
Trifluoropropylene Carbonate-Induced Solid-Electrolyte Interphases Enable High-Rate and Robust Alkali-Metal Ion Storage in MXenes 1.00
Eye of the beholder: Pupillary response reflects how subjective prior beliefs shape reinforcement learning with fake news 1.00
Modulating Closed Pore Structure to Enhance Rate Capability of Corncob-Derived Hard Carbon Anode for Fast-Charging Sodium Ion Battery 1.00
Electrolyte-Free Cathode Design for High-Sulfur-Loading All-Solid-State Li-S Batteries 1.00
Anion-Engineering Modified Halide Electrolyte Li3.25Zr0.75Cl3O1.125F with High-Voltage Stability for all-Solid-State Lithium Batteries 1.00
High Performance Moisture-Electricity Generator Aerogel With Ultrahigh/Gradual Ion Concentration Gradient, Wettability Gradient and Oriented Porous Structure 1.00
3D Surface Architecture and Zincophilic–Hydrophobic Interface for Promoting Stability of Zn Anode 1.00
Low‐Concentration Eutectic Electrolyte Enables Four‐Electron Zinc‐Iodine Batteries 0.90
Bridging Ligand Chemistry Enabled High-Performance Zn Metal Anodes in Aqueous Electrolytes 1.00
Achieving Metal‐Level Thermal Conductivity in Multifunctional Graphene‐based Composites via Coordination‐Driven Vacuum‐Assisted Layer‐by‐Layer Self‐Assembly Process 1.00
Dynamic Multistage Sorption‐Based Atmospheric Water Harvesting Device With Redistributed Water Content 1.00
A Tunable Island-Structured Bioinspired Interfacial Evaporator for Efficient Seawater Desalination and Energy Harvesting 1.00
Modulating Anion Solvation Competitiveness in Gel Polymer Electrolytes to Construct Robust Interphases for Long‐Life Li‐SPAN Batteries 1.00
Photocurable 3D-Printed Zinc Alloy Anodes: A Topology-Guided Dendrite-Suppressing Design for High-Rate Zinc Batteries 1.00
Scalable Hydrogel Evaporator Enabled by Ion–Regulated Water States for Solar Desalination 1.00
A Bi-Directional Redox Mediator for High-Capacity Rechargeable Aqueous Zn─S Batteries 1.00
Macroporous Zwitterionic Hydrogel Sponge With Enhanced Kinetics by In‐Situ UV Cryogelation for Efficient Water Production 1.00
A Self-Adaptive Hydrogen-Bonded Organic Framework for Long-Term Low-Temperature Sodium-Ion Storage 1.00
A Thermally-Activated Molecular “Firewall” Composite Solid Electrolyte for Inherently Safe Lithium Metal Batteries 0.94
In Situ Electropolymerization-Induced Interfacial Electrostatic Regulation Enables Dendrite-Free Aluminum Anodes for Ultralong-Life Rechargeable Aluminum Batteries 1.00
Unraveling the Pseudocapacitive Dual-Ion Storage Mechanism in Carbon Cathodes with Ultrafast Reaction Kinetics 1.00
Construction of Homogeneously Porous Composite Hydrogel Electrolyte for Dendrite-Free Aqueous Zinc-Ion Batteries: An Alkali-Etched Graphitized-Carbon Nitride Induced Polymerization Strategy 1.00
Bifunctional Additive for Stable Lithium Manganese Iron Phosphate Operated Under High-Temperature and High-Voltage 1.00
π‐Conjugation Engineering Induced Polyimide Cathode with Electrostatic Confinement for Ultra‐Stable Zinc‐Iodine Batteries 0.82
Photothermal‐Driven Structural Self‐Optimization Enables Marangoni‐Enhanced Stable Solar Desalination 1.00
2D Conductive Cu-MOF as a Multifunctional Regulator of Both Cathode and Anode to Synergistically Enhance the Performance of High-Loading Aqueous Zinc-Iodine Batteries 0.75
N-Doped Carbon-Stabilized CoSe/NiSe2 Heterojunction Toward High-Performance Supercapacitors and Photorechargeable Power Systems 0.91
Vertically Aligned Li+ Transport Interfaces for Fast-Charging Quasi-Solid-State Batteries 1.00
Microcrystal Cellulose‐Mediated Interpenetrating Networks toward Synergistic Water Transport and Activation for High‐Efficiency Solar‐Driven Interfacial Evaporation 1.00
In situ Catalytic‐Conversion Reaction Driven Gradient Lipophilic‐Lipophobic Fluorine‐Rich Multiphase Interphase Design for all‐Solid‐State Lithium Metal Batteries 1.00
Dual‐Electrode Stabilization of Aqueous Zinc‐Iodide Batteries Enabled by an Amino‐Functional Imidazolium Bromide Additive 0.91
Chiral Coordination Interphase‐Mediated Ion Regulation and Shuttle Suppression for Stable Zinc–Iodine Batteries 0.90
Deciphering the Role of Basic Amino Acids Additives in Boosting Zinc Ions Transfer Kinetics and Interfacial Stability for Ah-Level Rechargeable Zinc Metal Batteries 1.00
Controlling 1O2 Evolution by Mixed-Spin-Orbital Engineering With a Waste-PET-Derived-MOF on Kevlar for Enhanced Water Decontamination 1.00
Engineering π-K+ Interactions in Polycyclic Aromatic Hydrocarbon Anodes via Molecular Jigsaw Strategy for Fast-Charging Potassium-Ion Batteries 1.00
Carbon Fiber-Induced Crack Control and Polymethylhydrosiloxane-Modified Naturally Aspirated Gas Diffusion Electrode for High-Throughput H2O2 Electrosynthesis 1.00
Optimization of Cation−Anion Dynamics in Cationic Polymer Electrolytes for Boosting the Performance of All‐Solid‐State Lithium−Metal Battery 0.86
High-Capacity Electrode Coupling Empowered by a Zwitterionic Hydrogel Electrolyte for Wide-Temperature, High-Energy-Density Aqueous Sodium-Ion Hybrid Capacitors 1.00
Dynamic Hydrogen‐Bond Passivation Coupled With Defect‐Guided Ion Transport for Stable Zn Anodes 1.00
Quaternary Ammonium Iodide–Functionalized Cathodes for Direct Polyiodide Confinement in Durable Aqueous Zn–I2 Batteries 1.00
Interfacial Bonding Engineering Enables Built-In Electric Field for Sustained and Controllable Peroxide Activation 1.00
Synergistic Joule‐Solar Heating Approach With Emulated Cascading Design to Boost Performance in Membrane Distillation 1.00
Donor Number-Driven Solvation Manipulation of Ether-Aided Ionic Liquid Electrolytes Enables Stable K-Storage for FeNCN Anode 1.00
Buried‐Interface Engineering for Ultrafast Construction of All‐Carbon Fabric Toward Synergistic Water‐Electricity Cogeneration 1.00
Engineering Dual‐Functional Polypyrrole‐Grafted Amidoxime‐Based Nanofibrous Adsorbent for an Integrated Solar‐Powered Water‐Uranium‐Food Nexus System 1.00
pH‐Regulated Organic–Inorganic Additive Engineering for Dendrite‐Free and Long‐Life Aqueous Zinc‐Ion Batteries 1.00
Bioinspired Hollow Fibers With Efficient Transport Channels for Wide Humidity Atmospheric Water Harvesting 1.00
Toward High-Performance Zn Anodes: A Synergistic Dual-Ion Strategy via Interfacial Orientation Optimization 0.67
Liquid–Solid Conversion Chemistry Enables Fast-Charging Solid-State Li–Se2I2 Batteries 1.00
Synchronous Reshaping Dual Helmholtz Planes via Molecular Structure Mediation for Robust Zn Metal Batteries 1.00
Interfacial Dipole Enabled Three-Dimensional Oxygen-Exchange Network for Coking and Sulfur Tolerant Solid Oxide Cells 1.00
Molecular Engineering-Enabled Self-Adaptive Topological Adsorption Interface: Synergistic Hydrophobic Nanoconfinement and Electrostatic Shielding for Highly Stable Zn Anode 1.00
An Anion-Concentrating Layer for a Large-Capacity Al Anode Enabled by an Amorphous 2D Covalent Organic Framework 1.00
Decoupling Lithiophilicity and Ion Transport via Dual‐Gradient 3D Current Collectors for Stable Lithium Metal Anodes 1.00
Dual-Scale Steric-Topological Engineering of Polymer Electrolytes for Solid-State Lithium Metal Batteries 1.00
A Tailored Water-Based Binder with the Synergy of Hydrophobic Shielding and Anionic Regulation for Durable Zinc Powder Anodes 1.00
Hydrogen-Bonded Molecular Scaffold Locks Metastable Amorphous Energetic Materials for Synergistic Energy Release and Safety 1.00
Interfacial Molecular Welding via Passivation-Triggered Fluoropolymerization: Boosting Li+ Conduction and Stabilizing Dual Electrode Interfaces for Solid-State Lithium Metal Batteries 1.00
Electron Localization-Stabilized Inherent Multivalence States Enable D-Band Center Upshift Promoting High Redox Activity for Sodium Storage in Cu-Based VI-Group Sulfides 1.00
Achieving Near-Zero-Strain via Volumetric Neutralization in an H2V3O8/MXene/VO2 Cathode for Durable Zinc-Ion Batteries 1.00
Lithium Metal Batteries Enabled by Interfacial-Adhesive Amphoteric Polymer Nanosheets on Separator 1.00
Bismuth‐Organic Framework Anodes for Extremely High Capacity and Stable Lithium Storage 1.00
Strain-Driven In Situ Epitaxial Fluorite Oxides as Multi-Functional Fuel Electrodes for Solid Oxide Fuel Cells 0.91
Mitigating Voltage Decay via Chemo-Mechanical Decoupling Enabled by a Rigid-Soft Gradient Interphase in Li-Rich Layered Oxides 1.00
Steric Hindrance‐Guided Weak Coordination and Adsorption toward Dendrite‐Free and Long‐Life Aqueous Zinc Metal Batteries 1.00
Highly Efficient Multicomponent CO2 Conversion Facilitated by Synergistic Catalysis from N-Heterocyclic Carbene and Copper in Metal–Organic Framework under Mild Conditions 1.00
Mechanically Stable Honeycomb-Like Gel Polymer Electrolyte Enabling Fast Li+ Transport for High-Performance Lithium Metal Batteries 0.20
Targeting Si─O Bonds to Fortify the Solid-Electrolyte Interphase for Stable Lithium Metal Batteries 1.00
Breathable Graphene Oxide‐Polymer Composite Membranes With Two‐Step Barrier Mechanism Against Nerve Agents 0.29
A Self-Crosslinking MOF-Based Electrolyte Enabling Stable and Selective Li+ Conduction in Solid-State Lithium Batteries 1.00
Organophosphine‐Functionalized Nitrogen‐Rich Porous p‐Type Polymer Electrode for Li‐Dual‐Ion Batteries 1.00
Oxygen 2p Band Pinning Stabilizes High-Voltage Potassium-Ion Batteries 0.86
Metal‐Based Porous Hygroscopic Hydrogel Toward Efficient Passive Moisture Harvesting and Thermoelectric Generation 1.00
Fluoroelastomer-Engineered Atmospheric Hygroscopic Hydrogels With Adhesive and Anticorrosive Interfaces for Efficient and Stable Evaporative Cooling 1.00
Gradient Composite Anode Enabling Stable Interfaces in Garnet-Based Solid-State Lithium-Metal Batteries 1.00
Molecule-Directed Close Packing of All Zinc Crystal Facets Enables Surface Energy Homogenization for Stable Zn Metal Anodes 1.00
Bioinspired 3D‐Printed Microneedle Integrated Trinity System for Synergistic Freshwater‐Electricity Cogeneration 1.00
High-Reversibility Li-FeF3 Conversion Batteries Benefiting from Interface Welding of Garnet Electrolyte via Strong-Acid-Weak-Base Salt Hydrolysis Cleaning 1.00
Tailoring Quinone‐Based Organic Small Molecules as Universal Cathodes for High‐Performance Zn/Al‐Ion Batteries Operating From −50 to 50°C 0.60
Directional Thermal Rectification via Global Symmetry Breaking in Semimetal W2S3 Towards Extraordinary Solar Steam Generation 1.00
Decoupling Efficiency and Scale in Solar Evaporation by Alternating-Temperature Array Design for Humidity Regulation 1.00
Structure-Kinetic Coordination for Reconstructing Anode-Molecular Interfaces Toward Stable and Efficient Aqueous Zinc-Ion Batteries 1.00
Crosslinked Sodium Alginate Binder for Mechanically Robust and Long-Life Hard Carbon Anodes in Sodium-Ion Batteries 1.00
A High‐Entropy Composite Air Electrode with Dual‐Phase Exsolution for Efficient Reversible Proton Ceramic Cells 1.00
A Design Paradigm for Sr2Fe1.5Mo0.5O6-δ Cathodes in SOECs: Tailoring B-O Covalent Hybridization and Spin State Regulations for High Performance CO2 Electrolysis 1.00
Regulating Single-Plane Growth by Selective Self-Assembly Shielding Molecule for Ultra-High Areal Capacity Zn-Metal Batteries 1.00
High Conductivity and Diffusion Mechanism of Oxide-Ion in Sillén-Aurivillius Phase Oxobromide 0.90
An Oryza Sativa Leaves-Inspired Moisture Electric Generator for Self-Powered Wearable Sensing and Communication Underwater 1.00
Confined Ion Regulation via Synergy of Porosity and Acidity in Molecular Sieves for Lithium-Metal Batteries 0.68
Tailoring the Microenvironments of Dual‐Confinement COF Nanofluidics for High‐Throughput and Selective Ion Transport 1.00
Cryoprotective Hydrogel Electrolyte With Dynamic Hydrogen Bonds for All-Climate Zinc–Iodine Batteries 1.00
Hygroscopic Core−Shell Matrices via Coaxial Multi-Material Printing for Tailored Atmospheric Water Sorption 0.63
Encapsulated Strong-Coupled Cu2S/CoNi-LDH Heterojunction in Mesoporous Carbon for Advanced Aqueous Alkaline Zinc Batteries 1.00
Concentration-Gradient Solid-State Sulfur Cathode Enabling Improved Energy Storage Under High Sulfur Loadings 1.00
Modulated Interfacial Confinement for Fabrication of Covalent Organic Framework Membranes 1.00
Anion-Tailored Asymmetry Engineering in Doped Molybdenum Dichalcogenide Catalysts for Lithium–Sulfur Batteries 1.00
Synergistic Doping in Proton‐Conducting Oxides Unlocks High Conductivity and Low Proton Trapping 0.86
Fabrication of Pyridinic Nitrogen‐Functionalized Carbon Cloth for High‐Performance Iron‐Chromium Flow Batteries 0.90
Nanodiamond-Directed Oriented Growth of MnO2 Cathodes for Ultrastable Aqueous Zinc-Ion Batteries 1.00
Unveiling Confined Proton Desolvation Dynamics in Interlayer‐Engineered MXenes 0.88
Bio‐Inspired Aspartic Acid Additive Enables Stable Aqueous Zinc‐Metal Batteries 0.89
Chainmail CuNi Lattice-Distorted Nanoalloys on Monolithic Woody Carbon for High-Performance Electrocatalytic 5-HMF Hydrogenation 1.00
Nitrogen-Deficient Graphitic Carbon Nitride for Superior All-Solid-State Sulfide-Based Lithium Metal Batteries 1.00
A Bioinspired Coaxial Semiconductor Fiber for Durable Fire Warning 1.00
Deciphering the Role of Oxygen-Containing Functional Groups in Hard Carbon Anodes for Sodium-Ion Batteries 1.00
Excellent Honeycomb‐Networked MOF‐Spindle‐Knotted Fiber Mesh for High‐Efficiently Water Capturing 1.00
Multifaceted Effects of Oil Phase Hydrophilicity on Membrane Formation Dynamics during Interfacial Polymerization 1.00
Diethyl Sulfide as a Multifunctional Electrolyte Additive for Enhancing Electrochemical Performance of Lithium Metal Batteries 1.00
Bioinspired Confined Anisotropic Thermally Conductive MXene Film for Efficient Thermal Management 0.91
“Intelligent” Electrophoretic Additives: Construction of a Double-Electrode Interface Protective Layer for Aqueous Zinc Ion Batteries 1.00
Deciphering the Structure‐Performance Relationship of Polyamide Organic Solvent Nanofiltration Membranes via Synergistic Control of Monomer Geometry and Functionality 1.00
A Three-Level Biomimetic Evaporation System Inspired by Root-Stem-Leaf for High-Performance Solar Desalination 1.00
Sustainable Cellulose Biopolymers with Tunable Ionic Conductivity and Adhesion for High‐Performance Solid‐State Batteries 1.00
Viologen‐Based Cationic Covalent Organic Frameworks for Efficient Dechlorination via Capacitive Deionization 0.93
Glomerulus Inspired Charged Nanofibrous Membrane for High-Efficient Micro/Nano-Emulsion Separation 1.00
Thermo-Adaptive Interfacial Solar Evaporators Enhanced by Tunable Structure and Wettability for High-Efficiency Water and Electricity Cogeneration 1.00
Polarization Regulation of Alkali‐Treated Metal–Organic Frameworks for Dual‐Functional Dielectrics 0.83
Chaotropic Anion-Regulated Interfacial Desolvation Enables Ultrafast Aqueous Zn-Ion Storage in TiN-Integrated δ-MnO2/MXene Heterostructure Anodes 1.00
Ethyl Acetate Vapor Induced Local Ordering in Hard Carbon for Stable Sodium-Ion Batteries 1.00
Stable 4.6 V Anode‐Free Li Metal Batteries Enabled by Orchestrating Direct and Indirect Pre‐Lithiation 1.00
Axial Compressive Strain Stabilized High Spin State of Mn3+ Enables High-Performance Aqueous Zinc-Ion Battery 1.00
Charge Delocalization Electrolyte Design to Construct Fast Dynamic Interface for High-Voltage Lithium Metal Batteries 1.00
Unlocking High‐Capacity Graphite Cathode in Dual‐Ion Batteries Through Structural Disorder Regulation 1.00
Grain‐Boundary‐Enriched SEI via Field Regulation Enables Anode‐Less Potassium Metal Batteries 1.00
Scalable Steam‐Assisted Pyrolysis for Hard Carbon Anodes Toward High‐Performance Alkali‐Ion Storage 1.00
In Situ Constructing of LiF-Organic Composite SEI for Ultra-Stable Li Anodes in Li-Cl2 Batteries 1.00
Tuning Radiative Properties of Multiscale Porous Transparent Silica Aerogels for Efficient Solar Interfacial Evaporation 1.00
Unlocking Li-CO2 Battery Catalytic Potential via High-Entropy Alloy-Driven Synergistic Coupling for Amorphous Pathway Stabilization 0.82
Balancing MoS2 Growth and MXene In Situ Oxidation to Construct Dual Schottky Contacts for Enhanced Dielectric Loss and Broadband Electromagnetic Wave Absorption 1.00
Laser-Induced-Graphene-Enabled Droplet-Based Electricity Generator for Simultaneous Harvesting of Fog and Water Kinetic Energy 1.00
A High-Capacity π-Conjugated Polymer Cathode With Electron Reservoirs for Rechargeable Aqueous Zinc Batteries 1.00
Tension Effect Induced Ti-O Terminals Passivation of Ti3C2Tx MXene Towards Self-Discharge Suppression 1.00
Achieving High Heat Density and Superior Mechanical Strength in Phase Change Fibers for Efficient Personal Thermal Management 1.00
Green and Scalable Production of High‐Quality Graphene by Solid Lithiation and Exfoliation 1.00
CMD‐FEP: Machine‐Learned Free‐Energy Prediction for Efficient Screening of Material Interfacial Binder 1.00
Interfacial Orbital Hybridization in Multiphase Mn‐V Oxide Enabling Long‐Life and High‐Power Aqueous Zinc‐Ion Batteries 1.00
Graphitic Lattice‐Induced Microcrystalline Engineering of Two‐Dimensional Coal‐Based Hard Carbon Materials for High‐Performance Sodium Storage 1.00
Low‐Defect Carbon Host Enabling Robust Zero‐Excess Sodium Metal Batteries Without Presodiation 1.00
Dual‐Promotion of Fenton‐Like Activity via Mn/N Electron‐Rich Configuration and Micro‐Contaminants Co‐Mediated Electron Transfer Process 1.00
Tailoring Metallic Coordination Centers Enabling Electronic Structure Reconfiguration in Metalloporphyrin‐Based π‐d Conjugated Metal–Organic Framework toward Advanced Potassium‐Ion Batteries 1.00
Spin-Dependent Generation of Surface-Bound Radicals Toward Selective and Long-Lasting Water Purification 0.88
Can Carbon be Attractive Substrates for Zn Anodes in Aqueous Electrolytes under HER Disturbance? 1.00
Axial Fluorine Coordinated Fe Single-Atom Catalyst for Boosting Electro-Fenton Treatment of Organic Pollutants 1.00
Self-Sealing Molten-Salt Microreactors Enable Controllable High-N Doping in Air for Durable and Fast Sodium Storage 1.00
Dual-Function Electrolyte Additive via Molecular Spatial Shielding and Solvation Regulation Enables Highly Reversible Zn Anode 1.00
Spinel Heterostructure Strategy with Electron Delocalization for Highly Active Fenton-Like Catalysts in Wastewater Decontamination 1.00
One-Click Flow Transition Enables MnO2 Crystal Phase Engineering for Enhanced Catalytic Oxidation of HMF to DFF 1.00
Iodide Perovskites Leveraging Ionic Liquid Electrolytes Activate I+/I0/I− Four-Electron Redox for Long-Life and High-Voltage Aluminum/Iodine Batteries 1.00
Fluorinated Covalent Organic Framework Membranes for High‐Flux Nonpolar Organic Solvent Nanofiltration 1.00
A Synergistically Interlocked Ultrathin yet Robust Composite Electrolyte for Solid-State Lithium Metal Batteries 1.00
Intramolecular Multifunctionalization in a Fused N-Rich Scaffold Produces a Record-Density CF3 Energetic 1.00
Zinc−Ion−Assisted Catalytic Synthesis of Hard Carbon with Superior Plateau Capacity and ICE for Sodium−Ion Batteries 1.00
Electrolyte Design for High–Rate Performance Biphasic Membrane–Free Batteries 1.00
Mediating Trade-Off Between Oxidability and SO2 Resistance in Hydrocarbon Purification by Tailoring the Pt1 Charge Density on Pt1-[Pt1/MnO2]/Al2O3 Island-Sea Synergy System 0.90
High-Throughput Carbon Scaffold and Liquid Metal Enable High-Flux Li+ Transport, Improved Interface Wettability, Dendrite Suppression, and Polysulfide Control in Li–S Batteries 1.00
Configuring a Robust Sulfur-Rich Shielding Interphase for Suppressing Electric-Field-Driven Zinc Corrosion 1.00
An Energy-Dense Nonmetal Dual-Ion Battery Enabled by Weakly Interacted Ionic Liquid and a Ladder Polymer 1.00
Fluorinated Segmental Dilution Constructs Low‐Temperature Tolerant Localized High‐Concentration Polymer Electrolytes for Lithium Metal Batteries 1.00
Heterostructured Carbon-Coated Carbon Nitride Hollow Nanotubes Hybrid Microfibers for Ultra-High Capacity/Rate Wearable Energy Storage 1.00
Construction of Geopolymer Zeolite-Graphene/Carbon Nanotube Interface for Strong Metal−Support Interaction (SMSI) Effect to Achieve Efficient Solar Evaporation and Highly Selective Synergistic Catalytic Reduction of CO2 1.00
Atomic Zn Embedded Subnanopore-Rich Hard Carbon Fibers Toward Highly Reversible Quasi-Metallic Li/Na Storage 1.00
Three-in-One: Integrating Polymer Dots and δ-MnO2 for Powerful Zn-Mn Batteries 1.00
Fluorophenyl-Engineered Gel Electrolytes Enabling 4.8 V Lithium Batteries with Durable Electrolyte-Electrode Interfaces 1.00
Coupling Water-Poor Electric Double Layer with Stable Organic–Inorganic SEI via Large-Steric-Hinderance Electrolyte Additive for Highly Reversible Zinc Anodes 1.00
Triphasic WO3/Periodic Acid System for Amine-Specific Complexation and Ultrafast Photocatalytic Mineralization with Exceptional Quantum Efficiency 0.50
Robust and Highly Conductive Graphene-Based Foams for Efficient Thermal Insulation, Flame Retardancy and Electromagnetic Interference Shielding 1.00
Construction of Gel Electrolyte with High‐Entropy Polymer Matrix for All‐Weather Stable‐Operatable Li‐Metal Batteries 1.00
Mediating Role of Electrode Process Kinetics in Stabilizing Zn Anodes Through Electrolyte Additives 1.00
A Universal Strategy for Defect-Rich Porous Carbons via Air-Montmorillonite Assisted Carbonization Toward High-Performance Zinc-Ion Hybrid Capacitors 1.00
A High-Areal-Capacity and Long-Cycle-Life Zinc-Ion Battery with Robust V2O3@Graphene Microlattice Cathode and Interface-Protected Zn Anode 1.00
Multiple-Benefit Electrolyzer for Desalination and Co-Production of H2 and Acetone 1.00
Atomic Environment Engineering of Cobalt Single Atom-Nanocluster Synergistic Sites on Nitrogen-Doped MXene for Bidirectional Sulfur Electrocatalysis and Uniform Lithium Deposition 0.57
Tuning the Electronic Configuration of MoMn Bimetallic–Nitrogen–Carbon Catalysts for Advanced Lithium–Sulfur Batteries 1.00
Fabrication of Low-Dimensional Nitrogen-Rich Organic–Inorganic Hybrid Halide Perovskites and Their High Catalytic Efficiency for Thermal Decomposition of Ammonium Perchlorate 1.00
Engineering Metal‐Metal Junctions from Layered Double Hydroxide Frameworks for High‐Rate Solid Oxide Cells 0.32
Anion Vacancy Engineering of ZIF‐8‐derived ZnSe for Dendrite‐Free Zn Anodes 0.13
Breaking the Dependence on High Chloridion Concentration: A Four-Electron Zn-I2 Batteries with Inorganic Colloid Electrolyte 0.97
Ultralong Cycling of 4.6 V-Class Lithium Metal Batteries Enabled by a Highly Stable Crosslinked Polymer Deep Eutectic Electrolyte 1.00
Small-Molecule Selenium Cathode Constructed by Tailoring-Immobilization Strategy enables High-Power Lithium-Selenium Batteries 1.00
π‐π Interaction Engineered Membranes for pH‐Neutral Aqueous Organic Redox Flow Batteries 1.00
Rational Design of Covalent Organic Framework‐Based Membranes with Pore‐in‐Pore Structure for Efficient Mass Transport 1.00
Phase Change Emulsion Gel for Smart Windows With Bidirectional Light Regulating and Energy Storage Based on Refractive Index Matching 0.71
Spatial Confinement Strategy of Electrolyte System Enabling High Performance Aqueous Zinc–Iodine Batteries with Wide Temperature Range 0.90
Ternary-Anions-Driven Minimized Solvent Coordination for Extreme Condition-Adaptive Weakly Solvating Lithium-Ion Batteries Electrolytes 1.00
Toward Ultrahigh-Capacity Aqueous Zinc-Metal Batteries: Synergistic Engineering of a Cu-Doped Bi2Te3 Cathode and an NH4Cl-Modified Electrolyte 1.00
A Co‐Solvent Hydrogel Electrolyte for High‐Temperature and Anti‐Corrosion Zinc‐Ion Batteries 1.00
Conformal Polymer Electrolyte Enabled by Nitrile Coordination for Long-Cycle Solid-State Lithium Metal Batteries 0.90
Heterogeneous PEO/Electrodes Interface Coordination Chemistry Enables High-Voltage Solid-State Lithium Metal Batteries via an Asymmetric Electrolyte Design 1.00
Robust and Conductive Polymer Electrolytes via Solvent-Guided Hierarchical Network Formation 0.94
Uniform SEI design via Solvent Competitions for Stable Anode‐Free Zinc Batteries 1.00
Molecular Regulation of Viologen‐Based Porous Organic Polymers for Electrochemical Iodate Removal 1.00
Dynamic pH-Regulation Promoting Mn2+-Dominated Dissolution/Deposition for Ultra-Stable Zinc Ion Batteries 1.00
Interfacial Energy-Level Modulation Enables Electron-Ion Decoupling for Hydrogen Suppression and Highly Durable Zinc Metal Anodes 1.00
Photothermal Macroporous Lignin Cryogels for Off-Grid, Continuous Atmospheric Water Collection via Interlayer Heat Recovery 0.83
Taming “Voltage Valley” in Conversion-Type Cu2O Cathode Via Epitaxial MOF Integration for High-Performance Zinc-Ion Batteries 1.00
Constructing the Non‐Flammable Anion Acceptor‐Containing Deep Eutectics‐Based Gel Polymer Electrolyte for High‐Performance Li‐Metal Batteries 1.00
Ultra-Stable Polycarbonate-Based Solid-State Lithium Metal Batteries Enabled by In Situ Polymerized Ferroelectric Engineering 1.00
Polyphenolic Mechanochemistry‐Mediated Liquid Metal Hydrogels for Efficient Solar‐Powered Desalination and Electricity Generation 1.00
Bifunctional Polyrotaxane-Based Electrolytes Enable Long-Cycling and Fire-Safe All-Solid-State Lithium Metal Batteries 0.33
Constructing a Stable Elastomer Electrolyte Containing Tin‐Based Additives for High‐Performance Na‐Metal Batteries 1.00
Extensible-Aligned Liquid Crystalline Interphase Enabling Ordering-Induced Deposition for Ultra-Stable Zinc Metal Batteries 1.00
All‐Solid‐State Batteries with Ultralow Interfacial Resistance Enabled by Functional Garnet‐Type Mixed Ion‐Electron Conductive Interlayer 1.00
Nanoarchitectonics‐Enabled Stimulus‐Selective Energetics: Nacre‐Mimetic Interfaces Synchronize Structural Resilience and Enhanced Energy Release 1.00
Scalable CO2-Puffing Strategy for Fabricating High-Performance Biomass Solar Evaporator 1.00
Porous Organic Cage–Based Biomimetic Nanochannels: A Tailorable, Ion‐Sieving Interfacial Strategy for Aqueous Zinc Batteries and Beyond 1.00
Double-Sided Electrostatically Spun Fiber Membrane Fabricated by A-Side: Ag@PDA/PEN-BPA, B-Side: TiO2/PEN-B/P for Oil-Water Separation with Performance of Antimicrobial and Photocatalytic Self-Cleaning in Harsh Environments 1.00
Constructing In Situ Solid Electrolyte Interphase via Hierarchical Desolvation Engineering for Ultrastable Aqueous Zinc‐Ion Batteries 1.00
Dual-Channel Ion Storage Mechanism for Zinc–Ammonium Hybrid Batteries: Interfacial Zn2+/NH4+ Co-Deposition versus Bulk H+/NH4+ Co-Intercalation 1.00
Decoupling Dual Regulatory Roles and Mechanisms of Bismuth in Low-Carbon-Content Sn Anode for Fast and Stable Sodium Storage 1.00
Mechanically Interlocked Solid-Solid Bicontinuous Phase Epoxy/Water-In-Salt Hydrogel Structural Electrolyte for Zinc-Lithium Hybrid Structural Batteries 1.00
A Dual-Active-Site Mechanism Enabled by a Fused Quinone Imine for Dissolution-Resistant and High-Capacity NH4+ Storage 1.00
Dual‐Asymmetric Janus Aerogel Enabled by Ambient Drying for Synergistic Hydrovoltaic and Solar Steam Generation 1.00
Trace Additive-Driven Interfacial Assembly Orchestrates Zinc Deposition through Hydrogen Bond Network Disruption and Solvation Reconstruction 1.00
Engineering Vesicle‐Like Polyamide Nanofiltration Membrane via Interfacial Polymerization on Shear‐Triggered Nanoclay Hydrogel 1.00
Precise Control of the Graphitic Microcrystal Morphology and Pore Structure in Carbon Nanocoils for Highly‐Efficient Sodium Storage 1.00
Dual-Redox Active Sites Enable High Initial Coulombic Efficiency and Long Lifespan of Carbazole-Based Cathodes for Lithium Dual-Ion Batteries 1.00
Halogenated Organic Acid Additive Rendered Highly Reversible Four-Electron Transfer Zinc-Iodine Batteries by Strengthened Interhalogen Interaction and Protons Supply 1.00
Realizing Lean‐Electrolyte Zinc‐Ion Batteries via An Ultrathin and Cost‐Effective Separator 1.00
Methyl Tert-Butyl Ether Induced Synergistic Engineering of Inner and Outer Solvation Shell for Practical Lithium–Sulfur Batteries 1.00
Chloride-Driven Reconstruction of Perovskite Oxides for Durable High-Activity Oxygen Reduction Catalysis in Fuel Cells 0.91
Self-generated Conjugate Magnetic Field Realizing High Voltage and Fast Lithium-ion Transport of Polyether Electrolytes for Lithium Metal Batteries 1.00
Directional Construction of Thermal Superhighways with Composite Phase Change Materials for Chip Thermal Management Application 1.00
Atomically Dispersed Cr‐Enhanced Zeolite Catalysts for Accelerated Sulfur Conversion and Interphase Stabilization 1.00
Modulating Zincophile Property and Solvation Structure via Molecular Isomerism Engineering for Enhanced Zn Anode Stabilization 1.00
Full‐Component Recyclable and Electrical Insulating Lignocellulosic‐Encapsulated Liquid Metal for Efficient Thermal Management 1.00
Organic Molecular Differential Lock Balancing Transport-Reaction Kinetics for Long-Life Alkaline Zinc-Based Flow Batteries 1.00
Polyiodide Scavenger by Reversible Transformation of Amino Acid Enables Shuttle-Free and Dendrite-Free Zn-Iodine Batteries 0.67
Modulating Zn2+ Coordination Strength and Interfacial Mobility via Tailored Phenolic Additives for High Performance of Aqueous Zn-Metal Batteries 1.00
Concomitant Zinc Dendrite Mitigation and Iodide Shuttle Confinement: A Bifunctional Zwitterionic Hydrogel Electrolyte Unlocking Ultralong‐Cycling Aqueous Zinc‐Iodine Batteries 0.91
Modulating d–p Orbital Coupling via Gallium in High-Entropy Metal Phosphides for Enhanced Lithium–Sulfur Batteries 1.00
Spatially Janus‐Like Solar Evaporator with High Evaporation Rate and Enhanced Salt Processing Capacity 1.00
Non‐Covalent Molecular Engineering of Hydrogel Electrolytes via π‐Anion Confinement and Hydrogen‐Bond Reconfiguration for Wide‐Temperature and Ultra‐Stable Zn‐Ion Batteries 1.00
Inverse Solvation Configuration Induced by Organic Small-Molecule Spatially-Confined Coordination Enables Highly Reversible Zinc Batteries 1.00
Decoupling Heat Loss and Mass Transfer Limitation in Solar Reactor for Fractional Water Production 1.00
Fully Recyclable All-Solid-State Supercapacitors with High Stretching Stability and Room-Temperature Self-Healing Capability 1.00
Unlocking Li-Ions from “Cages” and “Shackles” in PVDF-HFP Solid-State Electrolyte through Synergistic Pinning Effect and Competitive Coordination 1.00
Dynamic Reconstruction of Polysulfides to Elemental Sulfur Enabling High‐Performance Ah‐Level Lithium‐Sulfur Pouch Cells 1.00
Phase-Regulated Interfacial Polarization in High-Entropy Materials Enhances Fenton-Like Oxidation and Self-Induced Coagulation for Environmental Remediation 0.81
Unraveling The Electrocatalytic Mechanism of Uranium Immobilization at MXene Edge Sites 1.00
Fe/FeO Nanoparticles-Decorated Porous SiOC Hierarchical Spheres Enable Robust LiF-Rich Solid Electrolyte Interphase and Ultrastable Lithium-Ion Storage 0.60
Solvation Reconfiguration and Controllable Zn(101) Deposition Enable Stable Zn Anodes 1.00
Hydrogen-Bond Donor Passivation Coupled with Inductive Electronic Modulation Enables Highly Reversible Zn Anodes via Interfacial Microenvironment Engineering 1.00
Synergistic Micro/Nano‐Bioactive Contaminants and Recalcitrant Associated Products Removal Enabled by Hierarchical Porous Platforms Integrating Physical Sieving and Chemical Degradation 0.92
High-Work-Function Semiconducting Artificial Layer for Durable Zinc Metal Anodes 1.00
Full‐Lifecycle Monitoring of Electrode States in Lithium‐Ion Batteries 1.00
Synergy of Triphase Interface Engineering and Electronic Modulation of Carbon Nitride Networks for Continuous-Flow Photosynthesis of H2O2 1.00
In Situ Construction of Rich-LiF/LiBr SEI by Ion-Supported Porous Polymer Strategy for High Interfacial Stability All-Solid-State Lithium Metal Batteries 1.00
Synergistic Engineering of Ethyl Cellulose and Etched ZrO2 Nanoparticles for Tailored Microporous Composite Membranes Toward Efficient Alkaline Water Electrolysis 1.00
Conquering Zn Dendrites via Crystal‐Facet Manipulation and Water‐Repellent Interphase Construction 0.80
Cooperative Solvation-Interface Engineering via Cell Membrane-Inspired Hydrated Nanodomains for High-Mass-Loading Zinc-Ion Batteries 1.00
Cracking the Reaction Pathway for Efficient HMF Electrooxidation: Strong Built‐In Electric Field and Multimetal Synergistic Effects 1.00
Synergistic and Continuous Coordination–Adsorption Modulation via Zinc Picolinate for Dendrite-Free and High-Rate Zinc Metal Anodes 1.00
Solar Heating Enhanced Selective Recovery of Metal Ions Through Flowing Electrodes Enabled by Hybrid Carbon Nanostructures 0.58
Pre‐Coverage of Side Reaction Sites Enables Quasi‐Anode‐Free Rechargeable Aqueous Zinc Batteries 0.25
Hierarchical Supramolecular Engineering of a Multifunctional Phase‐Change Material with Thermally Switchable Properties for Adaptive Thermal Management 1.00
Stabilizing Perovskite Phase via A-Site Charge Density Modulation During Metal In Situ Exsolution for Robust CO2 Electrolysis 0.94
Coupling Polar Terminal Designation and Double-Network Structural Construction of Hydrogel Electrolyte for Boosting Dendrite-Free Aqueous Zinc-Ion Batteries 1.00
Electron Island Effect: Cross-Layer Embedded Quantum Dot Heterostructures Toward Ultrahigh-Energy-Density Alkaline Aqueous Battery 1.00
Light/Heavy Rare Earth-Doped Mo-MXene: Excellent Electromagnetic Wave Absorption Based on Dual-Domain Synergistic Attenuation 1.00
A Scalable, Bionic Gemini‐Structured Solar Evaporator Enabling Ultrahigh‐Efficiency and Selective Lithium Extraction 1.00
Organic–Inorganic Hybrid Vanadium Oxide Cathode Material for High-Rate and Durable Aqueous Zinc-Ion Batteries 1.00
Dynamic Ion‐Dipole Modulation in Stimuli‐Responsive Polymer Enables Ultra‐Safe Lithium Metal Batteries 1.00
Ru-Loaded Nanosheet ZSM-5 for Bisphenol A Hydrodeoxygenation to Bicyclic Alkanes with Coke Resistance and Insights into the Ru-RuO2 Hydrogenation Mechanism 1.00
A Sandwich‐Structured Double‐Modified Gel Separator Enables Shuttle‐Inhibition and Dendrite‐Free Quasi‐Solid‐State Li‐Sulfur Batteries with Ultralong Lifespan 1.00
“Electronic Highway” and “Heterometal Seed” in Stable Ag‐N/P Coordination for High‐Performance Aqueous Zinc Ion Hybrid Capacitors 1.00
Colossal Barocaloric Strength in Plastic Ag2Te1-xSx with High Density 1.00
Electrode Engineering Strategy for 400 Wh kg−1 All-Solid-State Pouch Cells: Spatial Optimization of Charge Carriers Based on Electron and Ion Transport Flux 1.00
Ultra-Stable Interface via 3D Microchannels and Liquid Metal for Ultra-Long Lifespan Garnet-Based Solid-State Batteries 1.00
Interfacial Engineering of Ion-Sieving Sodium Alginate/Halloysite Nanotubes Modified Cellulose Separator for Ultra-Stable Aqueous Zinc-Ion Batteries 1.00
Phase Stabilization and Interlayer Engineering in MoS2 Superlattice via van der Waals Wrapping for High-Performance Water Desalination 1.00
Decoupling Electronic and Crystal Structure Effects to Overcome the Capacity‐Stability Trade‐Off for High‐Performance Aqueous Zinc‐Ion Batteries 1.00
An Efficient CuBi2O4/nZVI-PEC/PMS System for Simultaneous Removal of OFL and Cr(VI): Synergistic Role of S-Scheme/Ohmic Dual Junctions and Cu/Fe Double Active Centers 1.00
Molten-Salt-Assisted Industrial-Scale Fe3C-Based Nano-Reactors Endow Dynamic Regulation from Polysulfides Guided Transfer to Enforced Transformation Mechanism 1.00
Scalable Decoration of Ultrafine Metallic Grains via Hydrolysis‐Induced Deposition for Enhanced Sulfur Utilization in Lithium–Sulfur Batteries 0.89
Bioinspired Dual-Scale Heterointerfaces Engineering Strategy to Microclimate-Regulating Meta-Fabrics Toward Multimodal Self-Adaptive Personal Thermal-Moisture Management 1.00
A Dual‐Gradient Patterned Current Collector with Built‐In Stress Relief for Stable Li Metal Anodes 0.92
Gear Meshing Effect Induced Chemical and Mechanical Dual‐Reinforced Interfaces for Stable Quasi‐Solid‐State Lithium Metal Batteries 1.00
A Free‐Standing, Lightweight Lithium Anode Enabling High‐Energy Solid‐State Lithium‐Metal Batteries 1.00
Self-Supporting Fiber-Anchor-Encapsulated MnCN2@Cyclized-PAN Anode for High-Performance Flexible Li-Ion Batteries 1.00
Cobalt-Induced d-p Orbital Hybridization in Covalent Organic Frameworks Enables Synergistic Adsorption-Catalysis for Ultralong-Life Zinc-Iodine Battery 1.00
Roll‐To‐Roll Production of Li‐Rich Binary Alloy Anodes for Durable, High‐Rate Lithium–Metal Batteries 1.00
Engineering Pore Architecture in Hard Carbon for High-Performance Sodium-Ion Batteries: Distinguishing the Contributions of Ultramicropores and Closed Pores 1.00
Dual‐Halide Electrode–Electrolyte Interphase for High‐Voltage Potassium‐Ion Batteries 0.89
Gradient Interlayer Promotes Highly Stable Zn Metal Anodes for High-Performance Zn-Ion Batteries 0.53
DNA-Inspired Crosslinked Graphite Flakes Assemblies for Constructing Closed-Pore in Cellulose-Derived Hard Carbon 1.00
MAX‐Derived Photothermal Nanofiber Scaffolds for Synergistic Ion Transport in Sustainable Blue Energy Conversion 1.00
Dynamic Evaporation of Thermoresponsive Smart Evaporator Promotes Water‐Electricity Cogeneration 1.00
Achieving Ultra-High Proton-Storage in a Nitro-Substituted Organic Molecule via Nucleophilic Functionalization 1.00
Halogen-Terminated Ti3C2Tx MXene Electrocatalysts for Continuous Co-Generation of Ammonia and Electricity 0.60
Solar-Driven Gradient Aerogel Composites for Coupled Seawater Desalination, Thermoelectric Power Generation, and Dual-Mode Camouflage 1.00
Macro‐Micro‐Nano Asymmetric Light‐Trapping Architecture Enabling Spatial Decoupling of Evaporation‐Salt Crystallization for Efficient Solar Desalination 1.00
The Latent Culprit of Anode‐Free Lithium Metal Batteries Degradation 1.00
Solvent Engineering-Driven Anion Chemistry Enables Stable Zn Interfaces for Wide-Temperature Aqueous Zinc Batteries 1.00
Cerium‐Entropy Coupling Boosts Oxygen Vacancy Density and Bifunctional Oxygen Electrocatalysis in Reversible Protonic Ceramic Electrochemical Cells 1.00
Steric Effect Enhancing Reversible Oxygen Redox and Minimizing Voltage Decay in Layered Sodium Cathodes 1.00
Anchoring Unique Bi2Te3-BiPO4 Heterostructure on Porous N, S co-Doped Carbon Nanorods for Advanced Zn-Ion Batteries 1.00
Thermally Stable, Ion-Regulating Aramid Nanofiber-Polyacrylamide Modified Separator Enabling Safe and High-Performance Lithium Metal Batteries 1.00
Fluorinated Aromatic Anode-electrolyte Interface for Highly Reversible Zinc Anode 1.00
Engineering a Hierarchical Pt/IrO2 Architecture with Tunable Hydrophilicity and High Conductivity for Ultralow-Ir-Loading PEM Water Electrolysis 1.00
Biobased Bionic Spider Silk via Electrostatic Complexation for Simultaneously Harvesting Atmospheric Water and Triboelectric Energy 0.50
Designing a Multifunctional Lithium Metal Interface with “Solvent Capture–Desolvation Promotion–Ion Guidance” via Spin State Engineering of Spinel Oxides 1.00
Perfluorocarbon Chain-Ti3C2Tx MXene for Triboelectric Sensor 1.00
Multi‐Dimensional Ion Transport in Biohybrid Hydrogel Electrolytes: Porous Aromatic Framework‐Mediated Dendrite Suppression for Ultrastable Zinc Metal Anodes 1.00
A Tiron Redox Mediator Enabling Dominant Two-Electron Transfer Energy Storage in MnO2 Cathode Materials for Aqueous Zn Batteries 1.00
Coupled Adsorption–Catalysis at V2O3/Carbon Interface to Accelerate Polyselenides Conversion and Suppress Shuttling in Sodium–Selenium Batteries 0.80
Electrostatic Engineering of Loose and H2O-Poor Solvation Structure for Practical High-Areal-Capacity Aqueous Zinc Ion Batteries 1.00
Protecting Zinc Electrodes with Glutarimide: A Breakthrough in Dendrite Prevention and Cycle Life Extension 1.00
Structurally Engineered Soft-Elastic Polymers as Stress-Adaptive and Deposition-Regulating Layers for Ultrastable and High-Rate Zn-Powder Anodes 1.00
Molecular Engineering of Metal–Organic Frameworks to Synergistically Enhance Bulk-Interfaces Ion Kinetics for Quasi-Solid-State Lithium Metal Batteries 0.78
Self‐Adaptive Poly(Vinylene Carbonate) Based Electrolytes for Zero‐Pressure and High‐Temperature Solid‐State Lithium Metal Batteries 1.00
Synchronized Drying and Structural Engineering of Thick Electrodes for High‐Performance Lithium‐Ion Batteries by Laser Processing 1.00
Tailoring Lithium-Ion Transport and Solvation Structure via Fluorination Patterns in Polymer Electrolytes 1.00
Rational Design of Surface S-Doped Fe2O3 Micro-Hollow Structure on Graphdiyne for High-Performance Sodium-Ion Batteries 1.00
A High‐Performance Integrated Solar‐Driven Evaporator‐Triboelectric Nanogenerator Hybrid System for Simultaneous Water and Electricity Harvesting 1.00
Co-Solvent Electrolyte Engineering Enables Reversible and High-Energy Aqueous Manganese Metal Batteries 1.00
Nano‐Confined Synergistic Conduction Enables Electrolytes for All‐Solid‐State Lithium Metal Batteries 1.00
In situ Composite of Cationic Porous Organic Polymers and ɛ-MnO2 as Cathode Materials for Aqueous Zinc Ion Batterys 1.00
Interfacial Hydrogen Bond Engineering: Enabling Rapid 3D Assembly of MXene Thick Electrodes with High Mass Loading and Fast Charge Transport 1.00
Organic Pre-Intercalator with Weak Interaction to Host Lattice for High-Performance Zn Ion Batteries 1.00
Antimony (Sb) Recycling from Wastewater to Supercapacitor Electrode Using Ordered Porous Amidoxime-Polyacrylonitrile: Chemical Evolution and Transformation Mechanism 0.89
Niobium–Tungsten Oxides for Ultralow-Temperature Lithium-Ion Batteries Operation at −60 °C 1.00
Glass‐Ceramics Surface Engineering of Lithium‐Rich Layered Oxide Cathodes Toward High Capacity and High Stability 0.83
Unlocking the Potential of Cellulose Separators for High‐Rate Performance in Zinc‐Ion Batteries via Interface‐Engineered Tandem Chemistry 1.00
Moisture Adsorption‐Desorption Induced Ion Reciprocating Diffusion in Zwitterionic Polymer for Alternating‐Cycle Power Generation 0.95
A Highly Water‐Retentive Electrolyte Enabling Stable Aqueous Zinc‐Ion Batteries Across a Wide Temperature Range 1.00
Singlet Oxygen-Mediated Photocatalytic Removal of Perfluoroalkyl Substances by Sulfur Vacancy-Engineered ZnIn2S4 1.00
Hydration-Driven Structural Heterogeneity for Robust Zn2+ Storage in Vanadium Oxide Cathodes 1.00
Molecular Geometry‐ Mediated Interfacial Desolvation Kinetics of Disaccharide Isomers for Dendrite‐Free Zinc Anodes 1.00
Regulating Ion Migration and Deposition Through a Cellulose Hydrogel Electrolyte Enabled by Anion‐Reinforced Effect for Zinc‐Ion Batteries 1.00
Activating Redox Chemistry of Benzene Rings in π-d Conjugated Coordination Polymers Toward High-Performance Zinc-Ion Batteries 1.00
Dual-Functional Additive Regulating Zn2+ Solvation Structure and (002) Plane-Oriented Deposition for Dendrite-Free Zn Anodes 0.83
Multidimensional Engineering of Mixed Protonic‐Electronic Conducting Membranes with Excellent Hydrogen Separation Performance 1.00
Photothermal Heat‐Storage Nanostructure‐Assisted Water‐Electricity Cogeneration System with Dual Solar Energy Inputs and High‐Efficiency Heat Utilization 1.00
Geometrically‐Screened, Sterically‐Hindered Additive for Wide‐Temperature Aqueous Zinc‐Ion Batteries 0.36
Hydrated Proton Desolvation Optimization Toward High‐Rate Aqueous Proton Batteries 1.00
Deciphering Key Features Determining Electrochemical Stability and Conductivity of Halide Solid‐State Electrolytes 1.00
Radical-Mediated Pyrolysis Engineering Multi-Precursor Hard Carbons with Hierarchical Sodium Storage Architectures 1.00
Mn-Doped-Iron Sulfide as Long-Term Stability Anode for High-Performance Sodium-Ion Batteries at Wide Temperature and High-Rate Conditions 0.92
Organic–Inorganic Covalently Crosslinked Electrolyte Fabricated In Situ via Multifunctional Fillers for High-Performance Solid-State Lithium Metal Batteries 1.00
Nanomicellar Electrolyte Enables Highly Reversible Zinc Anode Via Strengthening Symmetric Plating/Stripping Chemistry 1.00
Tailoring Solvation Architectures in I─Bi2Se3-x Modified High-Conductivity Gel Electrolytes for Semi-Solid Lithium–sulfur Batteries 1.00
Powering-On-Mars Enabled by Ultrahigh Energy and Power Density Li-CO2 Battery 0.86
Deciphering Solid‐State Battery Interface Failure: Plasma‐Assisted Bulk‐Interface Lithium Diffusion Kinetics Regulation 1.00
Bifunctional Organic Molecule Co‐Intercalated Aluminum Vanadate for Highly Reversible Aqueous Zinc‐Ion Batteries 1.00
Dynamic pH Regulation and Interfacial Ion Redistribution via Molecular Buffering for Dendrite-Free Zn Metal Anodes 1.00
Collaborative Design of Light-Absorbing Shell Wrapping and Inner Thermal Conductivity Enhancing for Ca-Based Thermochemical Heat Storage Pellets 0.89
Interfacial Build-In Electric Field Unlocking Hetero-Architectured CoO-Co3O4 Nanotubes Toward High-Performance Li-S Batteries 1.00
Hydrated Eutectic Electrolyte Regulating Hydrogen-Bond Network toward Wide-Temperature Adaptability for Zinc-Metal Batteries 1.00
Unlocking Native Defects in Carbon Fibers via Helical Strain Engineering for High-Performance Stretchable Supercapacitors 1.00
Interfacial Coordination Engineering of Phthalocyanine-Based cMOF/LDH Heterostructures for Superior Capacitive Deionization 0.82
Water-Retentive Covalent Organic Framework Membranes for Efficient Proton Conduction in PEMFCs 1.00
An Extended π-Conjugated Porous Polymer with Dense Multiple Redox Centers Boosts High-Efficiency Sodium-Ion Storage 1.00
Low-Curvature Wood-Derived Thick Electrodes with High Capacity via In Situ Grown Nanoflower-Like Ni/Co Bimetallic MOFs for Aqueous Nickel–Zinc Battery 0.91
Host-Guest All-in-One Supercapacitors Enabled by 3D-Printed Zwitterionic Gel Microlattices for Advanced Energy Storage 1.00
Pt‐Activated Surface Nucleophilicity on High‐Entropy Oxides Enables Superior Biomass Upgrading 1.00
Rational Design of Ether-Based Localized Weak Solvation Liquid Electrolyte for Practical Lithium Metal Batteries 1.00
Ion‐Selective Pumping and Entropy‐Driven Lithium Transport in Composite Electrolytes via Dynamic Competitive Coordination for All‐Solid‐State Batteries 1.00
Nighttime Atmospheric Water Harvesting Enabled by Solar Prestorage Using a Phase-Change Thermal Storage System 1.00
Self-Adaptive Proton Intercalation-Enabled High Capacity and Cycling Stability of Vanadium Oxide Cathodes in Aqueous Zn-Ion Batteries 1.00
Designing Ionic Liquid Gel to Realize Integrated Modification Constructed High Voltage (4.5 V) and High Temperature (≥100 °C) Resistant Solid‐State Lithium Metal Battery 1.00
Functional Integration in Tailored Polymers Enables Zwitterionic Membranes with Selective Ion Transport and Enhanced Stability 1.00
Accelerating Near-Electrode Li+ Transport via High-Electronegativity Substrates for Sustainable Fast-Charging Lithium Metal Batteries 0.93
Sulfur-Doped Vanadium Oxide for High-Performance and Stable Cathode Material of Zinc-Ion Batteries 0.22
Li2O-Integrated Electrodes Enabling Enhanced Adsorption/Defluorination Kinetics Toward LiF-Rich Interphase for High-Performance Lithium Metal Batteries 1.00
Realizing Hard Carbon Anodes with Dual-High Slope and Plateau Capacities: From Precursor Design Principle to Sodium Storage Mechanism 0.70
All Wood-Based Evaporator via Cell Wall Regulating for Integrated Water and Energy Generation 0.72
In Situ Electrochemical Formation of Multifunctional Li3N/LiF Hybrid Interphase for Stable Lithium Metal Anodes 0.88
In Situ Nitrogen‐Rich Interphase Engineering Boosting Zn (002) Plane Texture with High Depth of Discharge for Long‐Term Zinc Metal Batteries 1.00
Electron-Donating Effect Derived Stable Homogeneous Electrode/Electrolyte Interface for Ultra-High Voltage Stable Lithium Metal Batteries 1.00
Unlock the Capacity of MnO2 Cathodes in Aqueous Zn-Ion Storage 1.00
Revealing the Role of Internal Strain Behavior on Stabilizing High Voltage LiCoO2-Based All-Solid-State Thin Film Batteries 1.00
Anchored Weakly‐Solvated Polymer Electrolyte for Operating Lithium‐Metal Batteries Under Extreme Cold Conditions 1.00
Quasi‐Perforated Plywood Architecture Membrane Based on 2D Porous Material for Molecular Sieving 1.00
Flexible Fluorine/Nitrogen Co‐Doped Carbon Electrodes with Silver Nanowire Reinforcement Enable Ultralong‐Cycling Lithium‐Ion Batteries 1.00
Highly Flexible and Structurally Stable Oriented Conductive Framework for Deformation-Tolerant Zn-Ion Batteries 1.00
Jellyfish‐Inspired 3D Micro‐Menisci Solar Desalinator for High‐Efficient and Stable Pure Water Production from Oil‐Brine Mixture 1.00
Hydrogen-Bond-Rich Supramolecular Multiblock Copolymers Facilitate Rapid Zn2+ Migration in Quasi-Solid-State Zinc-Ion Batteries 0.91
Phosphoric Acid-in-Clay Electrolyte Boosting Polybenzimidazole Membranes for High-Performance Fuel Cells 0.95
Interfacial Chemistry of Plasticizer to Invoke High-Performance Silicon Anodes for Quasi-Solid Lithium-Ion Batteries 0.77
Decoupling Mass Transport Conflicts in Solar Driven Water‐Salt Co‐Production via Heterogeneous Evaporation Interface 0.91
Scalable Zn‐Alloy Anode for High‐Current‐Density Aqueous Zinc‐Ion Batteries 1.00
Synergistic Interfacial‐Bulk Solvation Enables Fast‐Charging and Low Temperature Li‐Ion Batteries 1.00
Amide Molecules Induced Desolvated Zinc Ion Enables Stable Aqueous Batteries 0.86
Spatially Engineered Janus Separator Enables Bidirectional Regulation of Sulfur Electrochemistry and Lithium Deposition in High‐Energy‐Density Lithium–Sulfur Pouch Cells 1.00
Designing Hydrogen Bond Network Inside Thermal-Driven Multilayered Membrane for Sustainably Effective Energy Conversion from Seawater and WWTP Effluent 1.00
Dual-Exsolution Tailored Interfaces Boosts Bifunctional Catalysis for CH4-Assisted CO2 Electrolysis 1.00
Anion‐Confined Interface Enabling Uniform Stripping of Magnesium Anode 1.00
Hydrogen‐Bond Locked Quasi‐Solid Electrolyte Enables Zn Metal Batteries Operating at −106 °C 1.00
Phase‐Change Organic Small Molecules Enable Operation at Room Temperature in All‐Solid‐State Lithium‐Metal Pouch Cells 1.00
Constructing Gradient Soft‐Rigid Structure for Directed and Fast Li‐Ion Transfer Channels in Composite Solid Electrolytes 1.00
Porous Organic Cage with 3D Interpenetrated Electronegative Channels as Artificial SEI for Highly Reversible Zinc Anode 1.00
Inverse Design of Structured Electrodes in Lithium Metal Batteries: Integrated High-Throughput Phase-Field Modeling and Machine Learning 1.00
Zn/Cu Co‐Deposition Enables Dynamic Interfacial Reconstruction for Stable Zinc‐Metal Batteries 1.00
Biomimetic Ultrathin Cellulose Composite Separators for High‐Performance Lithium–Sulfur Batteries 0.67
Pre‐Loaded Functional Ion Pair in Hollow‐Sphere Channels for Enhanced Hydroxide Ion Conduction in Alkaline Flow Battery Membranes 1.00
Delamination-Resistant and Light-Induced Shape-Memory Supercapacitors for Wearable Devices 0.75
Establishing a Unified Light-Driven Dual-Electrode Strategy to Synchronize Interfacial Kinetics for Quasi-Solid-State Silicon-Air Batteries 1.00
Tunnel-Preinserted Guest Zinc Tailoring VO2(B) Enhances Zn2+/H+ Reversible De/intercalation Capability 0.63
Interface Engineering of Spatial Confinement‐Induced Ion‐Channel for Stabilizing Rechargeable Aluminum Batteries 1.00
Intermolecular Hydrogen Bonding Tailors Solvation Structures for Low‐Temperature and Long‐Cycling Lithium‐Ion Batteries 1.00
Molecularly Welded “Cellulose-Like” Membrane with Extensive H-Bond Networks Enabling Robust and Tunable Nanofiltration 1.00
Optimising Orbital Hybridization Induced Quenching Multistage Phase Transitions and Enhancing Redox Kinetics for Ultralow‐Temperature (−70 °C) Sodium Storage 1.00
Teardrop-Shaped 3D Solar Evaporator with Multiscale Biomimetic Water-Supply Structures for Highly Efficient Seawater Desalination 1.00
Amorphous Zirconium‐Based Halide Superionic Conductors with Exceptional Rate Capability and Low‐Temperature Performance 1.00
Wetting-Induced Blackening Enables High-Efficiency Solar Evaporation in Fully Biomaterial-Based Porous Hydrogels Without Photothermal Additives 1.00
Realizing a Wide-Temperature Aluminum-Foil-Anode-Based Lithium-Ion Battery 0.94
Phosphorus-Anchored PVDF Polymer-Regulated Spherulite and Solvation Structure for Long-Cycling and Safe Solid-State Lithium-Ion Batteries 1.00
Bioarmor-Inspired 3D Electrodes for High-Capacitance Stretchable Supercapacitors 1.00
Mitigating Interfacial Diluting and Space Charge Layer Effects in Diluted Electrolytes Through a Biomacromolecule Additive for Long‐Lifespan Aqueous Zn Metal Batteries 1.00
Engineering Electronic Delocalization Facilitates Interfacial Desolvation Kinetics for Dendrite-Free Zinc-Metal Batteries 0.96
Kinesin‐Mimetic Ion Director Enables Highly Oriented Zn Deposition in Aqueous Batteries 1.00
Dynamic Interhalogen Coupling Engineered by Multifunctional Ionic Liquid for High-Energy Aqueous Zn-I2 Batteries 1.00
Tunable Graphene Frameworks Enable Advanced Phase Change Composites with both Ultrahigh Thermal Conductivity and Latent Heat 1.00
Homogenizing Zn2+ Transport and Deposition by Molecular Aggregation State Regulation of Cellulose Separator for High-Performance Aqueous Zn-Ion Batteries 1.00
Photothermal‐Photocatalysis System by Photosensitive Covalent Organic Framework@Wood for Efficient Solar‐Driven Water Evaporation and Uranium Removal 1.00
Stable Zinc Deposition Enabled by Descriptor‐Guided Screening of Organic Electrolyte Additives Based on Molecular Polarizability and Surface Energy 1.00
Ultra‐Dense Bottlebrush Dynamic Phase Change Polymer Networks with Ultra‐High Latent Heat and Adaptive Electrically Conductive for Intelligent Thermal Storage and Device 0.86
PEDOT Nanowires Connecting Hollow Carbon Spheres Enable Long‐Cycling Zn‐Iodine Batteries 1.00
Interface Design Based on Gradual Synergy Between Groups for All‐Solid‐State Lithium Metal Batteries 1.00
Polymer‐Based Solid‐State Batteries: Anion Synergistic Effect Activates Organic Cathode with High Voltage and High Energy Density 0.85
Full‐Spectrum Solar Harvesting and Desalination Enabled by Supra‐Nano Amorphous Ruthenium Dioxide – Mineral Composites 1.00
Integrating Passive Daytime Radiative Cooling into The Evaporation‐Condensation System Enhances Thermal Convection for Sustainable Evaporation and Condensation in Closed Boundary 1.00
A Six-Electron-Transfer Organic Cathode for Aqueous Zinc Batteries 1.00
Significant Suppression of Sr Segregation to Substantially Enhance Performance of La0.6Sr0.4Co0.4Fe0.6O3-δ Cathodes for SOFCs via Thermodynamic-Kinetic Engineering 1.00
Hierarchically Aligned Aramid Nanofiber Aerogel Framework Enhances Ionic Transport and Interfacial Stability of Solid‐State Lithium‐Metal Batteries 1.00
Synergistic Structural Alignment and Interfacial Switching Enable Fast and Low–Energy Water Release in Solar–Driven Atmospheric Water Harvesting 1.00
Ion-Selective Microporous Membranes via One-Step Copolymerization Enable High-Performance Redox Flow Batteries 0.63
Systematic Design of Li2S Deposition Modes via Synergistic Microporous Defect Engineering and Transmitted Orbital Overlap 1.00
Electrostatic–Immobilized Polyiodides via Bifunctional Quaternary Ammonium Binder for Shuttle–Free and Ultra–Stable Zn–I2 Batteries 1.00
Encapsulating Zinc Powder in MXene/Silk Scaffolds with Zincophilic‐Hydrophobic Polymer for Flexible Zinc‐Ion Batteries 0.11
Phosphomolybdic Acid Induced Water Clusters Formation in Freezing Seawater: Enabling Ultra‐Low Enthalpy and Efficient Solar Evaporation 1.00
Synergistic Photothermal-Photocatalytic Accordion-Like Mo2AlB2 MBene Membrane for High-Efficiency Solar-Powered Water Remediation 1.00
Vacancy-Engineered Single-Atom MXene Membranes: A Quantum Leap in Ultrahigh-Flux Nanoconfinement Catalysis for Robust Water Decontamination 1.00
Dual Regulation of Bulk Heterostructure and Engineered Cathode-Electrolyte Interphase in Vanadium Cathodes for Durable Zinc Storage 0.89
Accelerated 3D Percolation Network for Ultra-High Critical Current Density of Composite Solid-State Electrolyte 1.00
High Hydrophobic Layer with Nanoscaled Cationic Confinement Enables Stable Zinc Anodes 1.00
Tuning Electron Cloud Density in MOF Nanosheets for Enhanced Proton Conduction in PEMFCs 1.00
Deep Eutectic Interaction Induced Lithium Salt Dissociation for Inorganic‐Rich Solid Electrolyte Interphase in All‐Solid‐State Batteries 1.00
Cluster‐Engineering Enabling Carbonate‐Compatible Lisub2/subS Cathode for Long‐Life and Safe Quasi‐Solid‐State Batteries with Wide‐Temperature Adaptability 1.00
3D-Printed Hygroscopic Matrices Based on Granular Hydrogels for Atmospheric Water Adsorption and On-Demand Defogging 0.78
A Bifunctional Separator with Gradient Distribution of MCM‐41 Zeolite for High‐Performance Aqueous Zinc‐ion Batteries 1.00
Hard Lewis Acid Sites Modulate Competitive Adsorption in Nickel Oxide for Efficiency 5‐hydroxymethylfurfural Oxidation 1.00
Highly Selective Synthesis Isoparaffins from CO2 Hydrogenation over ZSM-5@ZnCr Reverse Capsule Catalyst 0.92
In Situ Construction of Inorganic‐Rich Solid Electrolyte Interphase via Selective Anode‐Electrolyte Interactions Enabling Stable Lithium Metal Batteries 1.00
Chelation and Interfacial Engineering for Long‐Term Cycling and Self‐Healing Aqueous Zinc Batteries 1.00
EC‐Less Electrolytes for High‐Safety and Long‐Life Nickel‐Rich Lithium‐Ion Batteries 0.85
Molecular Tailoring of Helmholtz Plane by a Cyclic Imino Additive: Inhibiting Hydrogen Evolution Reaction and Enabling Dendrite‐Free Zn Anodes for High‐Performance Hybrid Zn/Na Aqueous Batteries 1.00
Rational Precursor Crosslinking Engineering for High-Performance Dual-Carbon Sodium-Ion Capacitors with Optimized Graphitic Microdomains and Pore Structures 1.00
3D Bioinspired Hair-Based Solar Evaporator for Efficient Water Harvesting 0.64
Ag/CoFe2O4@Biochar for Interfacial Solar Steam Generation and Heavy Metal Removal 1.00
Engineered Interface and Spatial Arrangement of Inorganic Components for Dendrite‐Free Li Anodes in Carbonate‐Based Electrolyte 0.50
Self‐Adaptive Cobalt‐Based Prussian Blue Analog Cathode for High‐Performance Aqueous Copper Metal Battery 1.00
Hygroscopic Zwitterionic Fabrics for Sustainable Atmospheric Water Harvesting 1.00
A Zwitterionic Gel Polymer Electrolyte with High Ionic Conductivity and a High Lisup+/sup Transference Number for Stable Lithium−Sulfur Batteries 0.90
Effects of Microchannel/Macrochannel Configurations on the Evaporation Performance of Internal Vertical/External Radial Hydrogel Solar Evaporators: Experiments and Simulations Insights 1.00
Enhanced Working Voltage in Hydrated Vanadate Cathodes: Insights into [VO₆] Octahedral Distortion and V 3id/i Orbital Splitting 0.63
Asymmetric Triple Catalytic Sites on Ternary-Metal Sulfides Enable Superior Radical-Nonradical Synergy in Water Purification 1.00
Asymmetric Mn2+ Cluster Electrolyte for High-Performance Mn-Metal Batteries 1.00
Electrolyte Chemistry Design via Mediumly Solvating Structure for High‐Voltage and Low‐Temperature Aqueous Batteries 1.00
Covalent Organic Frameworks Regulating the Catalyst Interfacial Microenvironment for High‐Power Proton Exchange Membrane Fuel Cells 0.75
Porous Ionic Liquids Featuring Chemical Site Toward Low-Pressure CO2 Capture and Conversion 1.00
Identifying A Multifunctional Fe-N-C Suspended Mediator with Cascade Regulatory Ability for Enhanced Aqueous Zn-MnO2 Batteries 1.00
Atomic‐to‐Nanoscale Cerium Engineering Enables Synergistic Dual‐Phase Electrodes for High‐Performance Reversible Protonic Ceramic Cells 1.00
Ultrathin TA-MXene Modification Layer with Sub-Nanometer Interlayer Channels Suppresses Polysulfide Shuttling and Accelerates Li+ Desolvation 1.00
Surface Reconstruction Enables High‐Voltage, Long‐Life All‐Solid‐State Batteries 1.00
Branched Ether‐Driven Electrolyte Engineering for Resilient Inorganic‐Polymeric Interface on Micro‐Silicon Anodes in High‐Energy Li‐Ion Batteries 1.00
V2CTx//MnO2 Based Zinc-Ion Hybrid Micro-Supercapacitors with High Energy Density for Wearable Electronic Devices 1.00
Self‐Dispersing Halide Catholyte Engineering for Enhanced Areal‐Capacity All‐Solid‐State Lithium Batteries 1.00
“Breathing” Mechanism of Polymer Pillar In/Out of Lattice Enabling High‐Loading Cathodes for Aqueous Zinc Batteries 1.00
Breaking Solid‐Solid Conversion Barriers in Aqueous Zn‐S Batteries via Dynamic Iodide Coordination and Solvation Regulation 1.00
Hydrogen‐Bond‐Mediated Proton Blocking Strategy for Achieving Ultrastable Zinc Anodes 1.00
Electrolyte Engineering for Long‐Term Stable Anion Exchange Membrane Water Electrolysis 1.00
Deep Eutectic Interlayer Design for Stability Enhancement in LLZTO Solid‐State Lithium Batteries 1.00
Electronic Structure and Lattice Vibration Regulating Enables Highly Stable Zn Metal Anode for Zinc Ion Batteries 1.00
Synergistic Integration of Atmospheric Water Harvesting and Solar‐Driven Hydrogen Production via Multifunctional Hygroscopic‐Photocatalytic Hydrogel Nanocomposite 1.00
Upcycling Polybutylene Succinate Waste to Succinic Acid via Paired Electrocatalytic using Thiol‐Engineered MOFs and a COsub2/sub‐Assisted Precipitation System 1.00
Ambient‐Dried Phase‐Change Functionalized Thermal Insulation Materials with Latent Heat Charging/Discharging Capacities and Superior Temperature‐Adaptive Thermal Regulation Performance 1.00
Integratable and Wide-Temperature All-Solid-State Thin Film Lithium-Ion Microbatteries Based on LixMnO2/Nb2O5-x Configuration 1.00
Microstructural Engineering‐Driven Electrochemical Performance in Water‐in‐Salt Electrolytes 1.00
Weakly Solvating Molecule‐Enabled Localized High‐Concentration Electrolytes for Ultralow Temperature Batteries with High‐Nickel Cathode/Lithium‐Metal Anode 1.00
Stabilized P─F Bond for Sustainable and Ultralong Life High‐Energy Lithium Batteries 0.83
Dual-Functional Core-Shell CNF@CuOx-CeOy Nanofiber for Efficient Simultaneous Low-Temperature Catalytic Hydrolysis of Carbonyl Sulfide and Methyl Mercaptan 1.00
Dynamic Interfacial Alloying for Highly Reversible Zinc Anodes 1.00
High-Entropy Prussian Blue Analogues Enable Synergistic Electronic Coupling and Charge Compensation for Efficient Li–CO2 Batteries 1.00
Localized Anion‐Enriched Environment Via In Situ Electrostatic Confinement Effect for Stable Lithium Metal Batteries 1.00
Surficial Cross‐Linking Hydrogen Bonds Enabling High‐Rate and Robust Solid‐State Lithium Metal Batteries 1.00
Steam‐Induced Surface Reconstruction of Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells 1.00
Heterogeneous La0.75Sr0.25Cr0.5Mn0.5O3-Based Nanocomposite Hydrogen Electrode for Efficient and Durable Solid Oxide Cells 0.95
Decoupling of Ion‐Solvent Interactions via Compartmentalized Molecular Design for Ultra‐Stable Aqueous Zinc Batteries 1.00
Introducing p-Band Center to Promote p/p-π* Orbital Hybridization for High-Performance Aqueous Zinc-Iodine Batteries Toward Flexible Wearable Devices and Seawater Electrolyte Applications 1.00
A Robust Dual‐mode Self‐Monitoring Battery Thermal Management System via Bilayer Structural Design 0.75
Entropy‐Driven Nonflammable Low‐Temperature Alkali Metal Molten Salt Electrolytes for Lithium Metal Batteries 1.00
Metal‐Organic Frameworks Facilitating Complexation for Long‐Cycle Zinc‐Bromine Flow Batteries 0.67
Grafting-Engineered Interfacial Desolvation Dynamics: A Universal Strategy for Low-Temperature Li-Metal Batteries 0.74
Highly Enhanced Energetic Kinetics and Reaction Mechanism Investigation of Hydrogenated Mg‐Al Alloys 1.00
Closed‐Pore Engineering Based on Spatiotemporally Partitioned Radical Editing for High‐Performance Hard Carbon Anodes in Sodium‐Ion Batteries 1.00
Heatable Polymer Current Collectors for Cold‐Climate Battery Operation 1.00
Defect-Engineered Carbon Fabric and Dual-Additive Electrolyte Unlock Ultra-Durable Flexible Iron-Ion Hybrid Supercapacitors 1.00
Interfacial Photothermal Membrane Distillation for Direct Solar Water Production 1.00
Bilayer Solar Crystallizer by a Directional Liquid Transport Fabric for Stable Brine Treatment and Ion Recycling 1.00
Rational Design of High‐Entropy Phosphorus‐Based Alloy Anodes for Fast‐Charging Lithium‐Ion Batteries 1.00
Disorder‐Induced Targeted Formation of Amorphous Lithium Sulfide for Ah‐Level Lithium–Sulfur Batteries 1.00
Dendrites‐Free Zn Anode Enabled by Dense Zn Deposition and Spontaneous Texture Reconstruction on (110)‐Oriented Nanotwinned Cu 0.88
Three‐Dimensional Through‐Localized Amorphization Engineering of Crystalline/Amorphous Heterophase Ammonium Vanadate Nanobelts for Advanced Aqueous Zinc‐Ion Batteries 1.00
Ionization‐Targeted Modulation Enables Fast‐Charging and High‐Temperature Lithium‐Metal Batteries 1.00
Breaking the Water Activity Barrier: Hydrated Eutectic Electrolytes for Long‐Cycling and Wide‐Temperature Zinc‐Ion Batteries 0.44
Engineering of a Hierarchical Arrayed Architecture with Abundant Heterointerfaces and Anion Vacancies for Kinetically Boosted Lithium‐Sulfur Batteries 1.00
Grotthuss Topochemistry Realizes Ah‐Level Fast‐Chargeable Zinc‐Vanadium Pouch Battery 1.00
Fully Exploited Trimethylsulfoxonium Iodide for Simultaneous Resolution of Manganese‐based Oxide Cathode and Zn Anode Challenges in Zinc–Manganese Batteries 1.00
Amorphous Zinc Phosphate Stabilizes Black Phosphorus Anodes for High-Performance Lithium-Ion Batteries 1.00
Mimicking the Protein: Hierarchically Hydrophilic Co(OH)2 Boosted Peroxymonosulfate Activation for Ultrafast Antibiotics Degradation 1.00
Double Anion Deep Eutectic Electrolyte with Fluoroacetonitrile Cosolvent for High Performance Lithium Metal Battery 1.00
In Situ Constructing Hybrid Solid Electrolyte Interphase and Regulating D‐Band Center on Zn Substrate to Enable High‐Rate and High‐Capacity Zn Metal Anodes 1.00
Ion‐Regulated Water Activation in Plasmonic Aerogels for Highly Efficient and Salt‐Resistive Solar Desalination 0.80
Amorphous High Entropy Alloy Nanosheets Enabling Robust Li–S Batteries 0.38
Self‐Adaptive Adsorption of Zwitterionic Polymer in Self‐assembly Lithium‐Sulfur Battery Cathode with 3D Dynamical Networks 1.00
Inner‐Wrinkled Porous Carbons via Soft‐Hard Coupling Assembly Strategy for Ultrahigh‐Capacity Lithium‐Ion Batteries 1.00
Low‐Energy Atmospheric Water Harvesting and Heat Recovery System Based on Vertically Stratified Structural Composite 1.00
Decoupling Electronic and Ionic Conductivities of Electrochemically Active LiCoO2 as Solid-State Electrolyte for Li Metal Batteries 1.00
High‐Temperature and High‐Voltage Gel Polymer Electrolytes for Lithium‐Metal Batteries: Integrating Hybrid Molecular Engineering and In Situ Polymerization Strategy 1.00
Atomically Dispersed FeOx Species Functionalized Fe2O3 Nano-Island Clusters toward Efficient Fenton-Like Catalysis 1.00
Joule Heating Driven Graphitization Regulation and Ni Single‐Atom Modification in Hard Carbon for Low‐Voltage and High‐Rate Potassium‐Ion Storage 1.00
Engineering Low-Coordination Atoms into Zn2Ti3O8 for Stable Zn Metal Anodes 1.00
Correlating the In-Plane and Through-Plane Proton Conductivity and Equilibrium Water Content of State-of-the-Art Proton Exchange Membranes 1.00
Hydrophobicity Gradient in Ultrathin Cellulose Separators for Durable Seawater‐Based Zinc Batteries 1.00
Engineering Robust MXene Nanosheet/Cotton Nanofiber Composite Membranes for Efficient Osmotic Energy Harvesting 0.83
Helical Branched Gel Polymer Electrolytes for 4.6V‐Class Lithium Metal Batteries 0.92
Trace Diluent‐Like Polyoxometalate Modulated Localized High‐Concentration Electrolyte Enables Highly Reversible Zinc Metal Chemistry 1.00
Inspired by the “Interlocking” Structure in Human Skin: A Universal and Efficient Interfacial Strategy Enabling Flexible Phase Change Materials with a Wide Scope of Customizable Functionalities 1.00
Field-Regulated Dynamics at Electrode/Electrolyte Interface Toward Efficient H2O2 Generation via Two-Electron Water Oxidation 1.00
Dynamic and Hierarchical Hydrogen‐Bonding Network Enables Self‐Healing Polymer Electrolyte for Ultra‐Long Cycle Life Rechargeable Aluminum Batteries 1.00
The Key Role of Anion – Cationic Coordination on Anode Electric‐Double‐Layer Evolution for High Performance Lithium Metal Battery 1.00
Epitaxial Substrate Engineering Enables Ultrastable Zinc Anodes via Low‐Lattice‐Mismatch Interface‐Induced Dendrite Regulation 1.00
In‐Situ CEI Layer Fabricated by Multifunctional Carboxylate Additive Enabling the Reversible Jahn–Teller Distortion in Manganese Oxides 1.00
A Dual‐Cathode System with a Naturally Aspirated Cathode and a Bimetallic Quasi‐MOF Derived Electrode for Efficient Heterogeneous Fenton over a Wide pH Range 1.00
Ferrocene Boronic Acid‐Modified Polyvinylidene Fluoride as a High‐Performance Binder for Lithium–Sulfur Batteries 1.00
A Flexible Thermal Interface Material as the Heat Switch for Solid‐State Cooling 1.00
A High-Stability Zinc Powder Anode Built on the Similarity Compatibility Principle 1.00
Iron‐Regulated D‐Band Center in Fe‐V2O5‐n/rGO Heterostructures Enables Ultralong‐Cycling Zinc‐Iodine Batteries via Optimal Iodine Adsorption‐Desorption Dynamics 1.00
Combining Inner Helmholtz Plane Adjustment and Gibbs–Thomson Effect to Enable Ultra-High Utilization of Zinc Electrodes and Inhibit Polyiodide Shuttling 1.00
Physicochemical Dual‐Force‐Driven PVAC@LPSCl Composite Electrolyte Film for High‐Performance All‐Solid‐State Batteries 1.00
Polydentate Ligand‐Induced Surface Reconstruction of MIL‐88A Reinforced Gel Electrolytes for Highly Reversible Zinc Batteries via Ion Rectification and Charge Redistribution 1.00
Stabilization the Electrode/Electrolyte Interphase by Reconstructing the Solvation Structure of Eutectic‐Based Polymer Electrolyte 1.00
Sustained-Release PVDF-Based Electrolyte Producing LiF-Li2O Layered Interphases for High-Rate Solid-State Lithium Metal Batteries 1.00
Tree‐Inspired 3D Biomimetic Evaporator for Efficient Solar Desalination and Automated Salt Collection with Zero Liquid Discharge 1.00
Hydroxylated Ionic Liquids as Functional Additives for Stable Aqueous Zn Batteries 0.43
Spherical Architecture of Bamboo Lignocellulosic Aerogels for Enhanced Solar‐Driven Evaporation and Antisalt Accumulation 0.90
Interfacial Engineering of MXene‐Based Heterogeneous Membranes with Enhanced Ion Selectivity in Vanadium Redox Flow Battery 1.00
Electrochemical Re‐Construction of Dynamic Intermediate Phases to Improve Reduction Kinetics in Lithium‐Sulfur Batteries 1.00
A Robust Lisup+/sup‐Rich Protective Layer for High‐Performance Dendrite‐Free Li Metal Batteries 1.00
Dynamically Stable and Intimately Bonded Li/Garnet Interface for High‐Areal‐Capacity Solid‐State Lithium‐Metal Batteries 1.00
H2/VPO4F Gas Battery with a Semi-Solid-State Electrolyte 1.00
Tethering Transition Metals of Li-Rich Manganese Oxides via Anion Coordination for High-Voltage Lithium-Metal Batteries 1.00
Upcycling Waste Pyrolytic Carbon Black into Sustainable Ultrahigh Performance Anode for Sodium‐Ion Batteries via Multi‐Chemistry and Engineering Synergism 0.71
Ultrafast Microwave Carbonization of Waste Using Graphene Microreactor for Efficient Energy Storage 1.00
Electric Double Layer Modulation Synergizes Organic–Inorganic Hybrid Solid Electrolyte Interface Achieving Ultra‐High Reversible Zinc Anode 1.00
A Composite Strategy on H2V3O8 and Carbon Fibers: Boosting the Mechanical and Electrochemical Performance of the Fiber Cathodes in Zinc-Ion Fiber Batteries 1.00
Multiscale Co-Construction of MXene/SiCnw Membrane Featuring Bicapacitor Architecture for Flexible, Stretchable, and Electromagnetic Interference Shielding Applications 1.00
Hydrogen‐Bond Acceptor and Anion Receptor‐Mediated Regulation of Interfacial Proton Mobility for Long‐Lifespan Aqueous Zinc Batteries 1.00
Achieving Highly Reversible and Dendrite‐Free Zinc Anode Using Dual‐Function 1,2‐DACH Electrolyte Additive Via Reconstructed Solvation Structure and In Situ Interfacial Protective Layer 0.75
An Electrostatic‐Interaction Engineering on Phytate‐Coordinated Polyamide Membranes for High‐Efficiency Lithium Extraction 1.00
Symmetrical Molecular Topology Enables Ultrathin Solid Polymer Electrolytes for Stable Lithium‐Metal Batteries 0.75
High-Performance Deep Eutectic/Ionic Liquid Gels for Zinc-Ion Battery and Flexible Sensor Applications in Extreme Environments 1.00
High‐Precision 3D Copper Substrate with Tunable Pore Sizes for Zinc Dendrite Suppression 1.00
Enhancing Intrinsic Reactivity and Durability of Zn‐Doped Cobalt Carbonate Hydroxide via id‐/iid/i Interaction Modulation for Alkaline Zinc Batteries 1.00
Self-Assembled Nanochains with Synchronous Anchor-Transport Effect Reinforced All-Solid-State Lithium-Metal Batteries 1.00
Synergistic Dual‐Gradient Architecture and Vacancy‐Engineered Catalytic Interfaces via p‐Band Modulation for High‐Reversibility Lithium–Sulfur Batteries 1.00
Long-Life Anode-Free Lithium Metal Battery Enabled by Synergistic Electrodes Design 1.00
Silane‐Modified Zn Anode Induced (100) Plane Preferential Nucleation Enables Stable Aqueous Zn Batteries 0.80
Entropy Regulation Quantified via Solvation Chemistry of Nonaqueous Electrolyte for Robust Lithium‐Metal Batteries 1.00
Synergistic Vacancy and Amorphization Engineering in BiOCl Heterostructures Enable Ultrafast Potassium‐Ion Storage 1.00
Modulating Zn2+ Desolvation and Deposition with Fluorine-Nitrogen Co-doped Carbon Dot Interlayers for High-Rate Aqueous Zinc-Ion Batteries 1.00
Precise Mo‐Fe Dual‐Atom Coordination Regulates the Selective Generation of Non‐Free Radicals in Peroxymoncosulfate Activation 1.00
Dual‐Enhanced Charge Transfer through Prelithiation Strategy in Polymer Electrolyte Enables Robust LiF‐Rich SEI for Ultralong‐Life All‐Solid‐State Batteries 0.57
High-Strength Ultrathin Solid-State Electrolyte with Ion-Rectifying Honeycomb-Like Skeleton for Lithium Metal Batteries Free from External Pressure 1.00
Janus Adsorption of Polar Ion Hubs for Simultaneous Regulation of Zinc Deposition Kinetics and Interfacial Stability in Long‐Cycle Aqueous Zinc‐Ion Batteries 0.93
Mildly Turbostratic Films based on Defect-Less Ti3C2Tx MXene with Ultrahigh Volumetric Capacitance for Electrochemical Zinc-Ion Storage 1.00
Engineering a Dual‐Functional Polyarylether Nitrile Nanofibrous Framework for Stable Lithium Metal Anodes in Low N/P Lithium Metal Anodes 1.00
Biomass‐Derived Bilayer Aerogels for Continuous All‐Day Atmospheric Water Harvesting: Synergistic Adsorption‐Desorption and Antimicrobial Applications 1.00
Polymer‐Salt Effects with Enhanced Eutectic Behavior in Hydrogel Electrolytes for Aqueous Zinc Batteries at −70 °C 1.00
Designed Construction of Bifunctional Interphase Preactivated via Over‐Discharge Strategy Toward Stable Lithium–Sulfur Batteries 1.00
Molecular Engineering Design Temperature Sensitive Atmospheric Water Harvesting Biomimetic Multiphase Gel 1.00
Defect‐Engineered Inert Interfaces on Iron‐Rich Clay Minerals Boost Exclusive Electron Transfer Pathway in Fenton‐Like Reactions 1.00
Accelerating Desolvation and Constructing Dual-Storage Channels for Zn2+ by Ligand Field Engineering of Polar Organic Molecules for High-Performance Zinc-Ion Batteries 0.89
Enabling Stable Zn Anodes Through Solvation and Interphase Regulation by Dual‐Functional Organic Additives 1.00
Implanting Non‐Lithiated Metal into Fluoride/Nitride Hybrid Matrix Enabling Tailored Lithium/Garnet Interface Chemistry for Durable Solid‐State Lithium Batteries 1.00
Co‐Engineering of In Situ Lithium Compensation and Oxygen‐Anchoring Modulation Enables Thermochemically Stabilized NCM811‐LATP Composite Cathodes for Ultra‐Long Cyclability 1.00
Hybrid Directional Radiative Cooling and Solar Heating for Efficient Water Harvesting via Interior Natural Convection 1.00
3D‐Printed Ultrahigh‐Conductivity Polymer Gel Electrodes with High Mass Loading for Thickness‐Independent Zinc‐Ion Hybrid Micro‐Supercapacitors 0.88
Choreographing Orbital Hybridization Cascades to Unleash Selective Proton Storage in Aqueous Zinc‐Ion Batteries 0.88
Unraveling the Ultrafast Deposition Kinetics Within Zincphilic and Hydrophobic Organic Interphases for Dendrite‐Free and Long Lifespan Zinc Anodes 1.00
A Catechol Grafted Polymer Binder Regulating Cation Storage Behaviors in MnO2 Cathode for Rechargeable Aqueous Zn Batteries 1.00
Anion‐Modulated Solvated Structure for All‐Solid‐State Lithium Metal Batteries with Inorganic‐Rich SEI 1.00
Ultrathin Cellulose Composite Separator for High‐Energy Density Lithium‐Ion Batteries 1.00
Air‐Stabilization Creates Non‐Crosslinked Starch Particles for High‐Performance Hard Carbon Anodes 1.00
Deoxygenation-Induced Lattice Distortion in CuOx for Efficient Methane Diolate Anion Oxidation and Bipolar Hydrogen Evolution 1.00
Design and Fabrication of ACamp;GO Carbon‐Fiber Structural Supercapacitor with Balanced Mechanical and Electrochemical Properties 1.00
Bipyridinic Iron Single Atom in Metal–Organic Frameworks as Electronic Pump of H2O2 for Continuous Water Decontamination 1.00
Polyzwitterionic Hydrogels with Tunable Interconnected Pore Structures Enabled by Ion‐Induced Phase Separation 1.00
Stress‐Mediated Dynamic Li Plating in Practical Li Metal Pouch Cells 1.00
Moderate yet Reversible Oligozwitterion Adsorption Unlocks Stable Zinc‐Ion Batteries 1.00
Enhancing Compatibility of Halide with Sulfide-Electrolytes via High Oxygen Incorporation for Robust Solid-State Batteries 1.00
Tailoring Li‐Accelerated Motif Enables Lithium Stabilization and Polysulfide Conversion for Long‐Cycling Li–S Batteries 1.00
Lewis Acidic/Basic Oxides Modulated Cusub3/subP for Efficient Lithium Polysulfide Electrocatalytic Conversion 1.00
Plant‐Inspired High‐Performance Hydrovoltaic Electricity Generation in Janus Aerogel Fibers with Gradient Nanostructures 0.75
Self‐Sustained Electricity Generation from Ambient Moisture Enabled by Step‐Gradient Polysaccharide Films 0.94
Synergistic Enhancement of Zinc‐Ion Hybrid Capacitors via Redox‐Active Doping and Sulfonated MXene‐Modified Polypyrrole Cathodes 1.00
Climate‐Adaptive High‐Performance Moisture‐Induced Electric Generator Utilizing Electric Double‐Layer Gradient 0.55
Molecular Engineering Regulation Redox‐Active Sites and Nanostructures of Covalent Organic Framework for High‐Performance Lithium Sulfur Batteries 1.00
Overlooked P-Doping Destroys CoSe2’s Lattice Ordered Structure for Modulating the Deposition of Li2S 1.00
Polyelectrolyte Gradient Hydrogels for Efficient Solar Evaporation 1.00
Multi‐Solvent Synergy Strategy Unlocks Anti‐Corrosion and High Reversibility of Zinc Anodes: Paving the Way for Robust and Temperature‐Resilient Zinc‐Iodine Batteries 0.90
Homogeneous Li Flux and Mechanical Stable Solid‐Electrolyte Interphase Enabled by Different Solvation Chemistry for Lithium Metal Batteries 0.17
Deciphering the Maze of Monomer Concentrations for Customizing Ion‐sieving Performance of Polyamide Membranes 1.00
Regulating the Co Spin State via Directional Fe Doping to Enhance Sulfur Conversion Catalysis 1.00
Rich Polar Groups and Extensive Charge Distribution in Functional Binders Enable Long Cycle Life Zn//I2 Batteries 1.00
Aerosol Jet Printed MXene Microsupercapacitors for Flexible and Washable Textile Energy Storage 0.20
Full Depth-of-Discharge Cycling in Zn||MnO2 Batteries Enabled by Alkaline Salt-Concentrated Hydrogel Electrolyte 0.04
From Nano to Macro: Multiscale Calculations of Thermal Transport in Graphene‐Skinned Cu Composites 1.00
Remodeling Interfacial Electrical Field for Superhigh Capacity and Ultralong Lifespan Aqueous Zinc‐Ion Batteries 0.69
Roll‐To‐Roll Coating to Processing Large‐Area Zinc Anodes toward Fast and Dendrite‐Free Deposition 1.00
Dynamic Metal‐Ligand Coordinated Self‐Healing Polymer Electrolytes for Lithium‐Ion Batteries: Correlating Coordination Mechanisms with Electrochemical Properties 1.00
Lithium Metal Batteries Enabled by Ion Flux‐Regulating Coating on Separator 1.00
Enhanced Potassium Ion Diffusion and Interface Stability Enabled by Potassiophilic rGO/CNTs/NaF Micro‐Lattice Aerogel for High‐Performance Potassium Metal Batteries 1.00
Scalable Electrostatic‐Induced Control of Marangoni Deposition of Uniform 3D‐Porous PEDOT Electrodes for Ultrafast AC‐Line Filtering and High Areal/Volumetric Capacitance 1.00
Wind Power Generation and Integrated Fog Collection System Based on Bionic Hypericum Flowers Structure 1.00
Dual Fluorination Molecular Design Enabling Polyether Solid Electrolytes for 5.0 V Lithium‐Metal Batteries With Aggressive Chemistries 0.91
Lithium‐Rich Solid Polymer Electrolytes Enabled by Thermal‐Assisted Dual‐Phase Dissociation for Highly Stable Flexible Electrochromic Devices 1.00
W-Alloying Induced Long-Period Stacking Ordering in Easily Delaminated (V, W)4/3Zr2/3AlC i-MAX and Excellent Antitumor Performance of (V, W)1.33C i-MXene Derivatives 1.00
Unlocking Unprecedented Gravimetric Capacitance in Thick Electrodes Through Conformal Densification of Robust MXene Hydrogels 1.00
Topological Polymer Electrolyte Design with Dual Confinements for Long‐Life Quasi‐Solid‐State Lithium–Sulfur Batteries 0.86
Aqueous AC‐Line Filtering Electrochemical Capacitors Featuring 2.5‐V Voltage Window and Kilohertz Response Using Boron‐Doped Diamond Nanoarrays 0.91
Improving Electrocatalytic Activity and Durability of Cobalt‐Free Bismuth Ferrite‐Based Perovskite Oxygen Electrode for Reversible Solid Oxide Cells 1.00
High‐Stability Dual Janus Li‐Alloy Anode via Single‐Step Surface Solution Etching 1.00
Ksp-Regulated Electrochemically Etching Strategy: BaSO4-Decorated NiCo-LDH with Strong Built-in Electric Field for High-Performance Aqueous Alkaline Zinc Batteries 1.00
Hydrogen-Bond Network-Mediated Solvation Engineering Enables Synchronous Optimization of Zinc Anodes Kinetics and Iodine Cathodes Redox 0.60
Regulating the Sulfur Reduction Pathways with Fe2Mo3O8/NC Electrocatalyst 1.00
Interfacial Alloying-Induced Optimization of Zn2+ Diffusion and Atomic Migration for Stable Aqueous Zn Batteries 1.00
Thermal Runaway Inhibition of Lithium‐Ion Batteries Employing Thermal‐Driven Phosphazene Based Electrolytes 1.00
2D perovskite Enabling Super‐Fluorinated Interphasial Chemistry in Solid Polymer Electrolyte for Lithium‐metal Batteries 1.00
Plasmonic RuO2 Coupled with Work Function-Tuned Cu(OH)2 as Cathodes for Enhanced Visible Light-Responsive Zn-Air Batteries 1.00
Carbon Nanofibers Surface‐Exposed with Highly Active Ag Nanoparticles for Enhanced Interfacial Dynamics of Lithium Metal Anodes 0.82
Electron‐Delocalized Benzimidazole‐Linked Organic Electrode with Enhanced Redox Availability for High‐Performance Ammonium Capture via Capacitive Deionization 1.00
High‐Stretchable Solid–Solid Phase Change Aerogel Surface‐Modified with Ni‐MOF for Efficient Photothermal Energy Conversion‐Storage and Thermal‐Induced Shape Programming 1.00
A High‐Voltage Alkaline Zinc‐Iodine Flow Battery Enabled by a Dual‐Functional Electrolyte Additive Strategy 1.00
Cyclophane‐Architected Piperidinium Polymers With Intrinsic Microporosity Boost Ion Transport in High‐Performance Anion Exchange Membrane Fuel Cells 1.00
Interlayer of Lithium‐Ion‐Sieving Spodumene Nanosheets Coupled with Co‐Loaded CNFs Enables High‐Performance Li‐S Batteries 1.00
A Universal Multiscale Ion–Electron Dual Regulation for on‐Demand All‐3D‐Printed High‐Voltage Full Batteries 0.71
Solution‐engineering of Vanadyl Ethylene Glycolate for Promoting Cathodic Kinetics in High‐Performance Zinc‐Ion Batteries 1.00
Defect‐Engineered ZIF‐Derived Carbon Hosts for Long‐Life Aqueous Zinc‐Iodine Batteries 1.00
Superhydrophilic Solar Evaporator Combined with Ion‐Selective Membrane for High‐Efficiency Lithium Extraction 1.00
High Energy Efficiency on Zn–Air/Iodide Hybrid Batteries with Iron Phthalocyanine Coupled Co Single Atoms Dual Active Sites 1.00
Ampere-Level 4000 h Parallel Alcohols Electro-Refinery and Hydrogen Production 1.00
Engineering Ion Transport Highways Through Polyoxometalate‐Functionalized Metal−Organic Frameworks for Solid‐State Lithium Batteries 1.00
Stabilizing Zinc‐Iodine Batteries via Amyloid Fibril‐Based Electrolytes: Ion Transport and pH Regulation Through Hierarchical Networks 1.00
Insights into the Geometric Properties and Electrochemical Behavior of Printable Zinc Powder Anodes 1.00
Revealing the Conduction Behaviors of BaCesubx/subZrsub0.8‐x/subYsub0.2/subOsub3‐δ/sub by Clicking Mouse: From Experimental and Theoretical Studies to Software Development 1.00
Interfacial Engineering of Solvent-Free Cathodes with High Loading for High-Energy-Density Lithium Metal Batteries 1.00
Structure Regulation of Hard Carbon with Enriched Semi‐Closed Ultramicropores for Enhanced Rapid Sodium Storage 1.00
Weakly Solvating Electrolyte: Regulating Polysulfide Intermediates for High-Performance Lithium-Sulfurized Polyacrylonitrile Batteries 1.00
Engineering Electronic Inductive Effect of Linker in Metal-Organic Framework Glass Toward Fast-Charging and Stable-Cycling Quasi-Solid-State Lithium Metal Batteries 1.00
Ultra-Stable Zinc Metal Batteries Enabled by Adsorption-Desorption Equilibrium of Zinc Ions at the Additive-Mediated Interfacial Layers 1.00
Reversible H+-Lock/Unlock via Enol/Ketone Redox: Parasitic Reactions-Free Zn Anode and High-Performance Aqueous Zn-Ion Batteries 1.00
High Fire‐Safety, Thinning Lithium Metal Anode for High‐Energy‐Density Lithium Metal Batteries 1.00
Regulation of Intra‐Nanopore Microenvironment in Oxygen‐Rich Covalent Organic Frameworks for Enhanced Capacitive Deionization 0.88
Semi‐Solid Na‐K Alloy Anode with Enhanced Stabilities for Advanced Sodium‐Ion Batteries 1.00
Conductive Short-Chain Sulfur Composites with Ultra-High Sulfur Content as High-Capacity Anode Materials for Na/K-Ion Batteries 1.00
Asymmetric Coordination Modulating Co Spin State for Peroxymonosulfate Activation to Accelerate 1O2 Generation 1.00
The In Situ Polyelectrolyte With Liquid Metal Filler for High Rate and High Stability Quasi‐Solid‐State Sodium Battery 1.00
High‐Areal‐Capacity Manganese‐Based Redox Flow Batteries via Sodium Diphosphate‐Modified Electrolyte 1.00
Multifunctional Polyfluoride Ionogel‐Encapsulated Lithium Anodes for Durable and Safe Pouch Cells under Harsh Conditions 0.68
Enhancing Electrochemical Energy Storage with 3D Ti3C2Tx Hybrid Electrode Materials 1.00
Electron Donation Effect of α-Boron Nanosheet Enables Highly Stable Zinc Metal Anode 0.31
A Sustainable Solar Evaporation Strategy: Higher Condensate Yields Through Remote Condensing Structure via Polyelectrolyte Solar Evaporator 0.73
Lewis Acid-Base Bifunctional Ionic Covalent Organic Frameworks for CO2 Chemical Fixation 1.00
Synergistic Adsorption-Diffusion-Catalytic Effect Boosting Polysulfides Conversion by Rational Isotype Heterojunction Design for Highly Reversible Lithium–Sulfur Batteries 1.00
Graphene Oxide‐Carbon Nanotube Hybrid Membranes for High‐Pressure and High‐Flux Nanofiltration 1.00
FeCo Alloy Clusters Optimized Heterogeneous Catalytic Interface for Driving CO2 Hydrogenation to Light Olefins 0.64
Methylation Design on Weakly Solvating Ethers for Wide-Temperature Li–SPAN Battery 1.00
High‐Entropy Gel Polymer Electrolyte for Wide‐Temperature Operatable Li‐Metal Batteries 0.88
Pulling Effects of Interlayer Water Molecules Strengthen Dry-swimming Zn2+ Reaction Kinetics in Layered Vanadium Oxides 0.43
Multidimensional Synergistic Strategy: “Anchoring‐Coordination‐Conductivity” to Assist High‐Performance Zinc‐Ion Batteries 1.00
Structure Design of Bipolar Conjugated Porous Polymer Electrodes for High‐Performance Aqueous Symmetric All‐Organic Batteries 1.00
Molecular Engineering of Monofluorinated Siloxane Electrolytes for High-Voltage Lithium Metal Batteries 1.00
Fast-Charging High-Energy-Density Lithium Metal Pouch Cells Achieved Through the In Situ Formation of Inter-Bridged Micrometer-Scale Li-Al Alloy Architecture 1.00
Superoxide Radicals Inducing Perturbation in Water Hydrogen Bond Networks for Enhanced Solar‐Driven Water Evaporation 1.00
Ultra-Efficient Hydrogen Crossover Suppression Achieved by Precise Pt Hybridization in Thin Nafion Membranes for Water Electrolyzer 1.00
Edge‐Delocalized Electron Effect on Self‐Expediating Desolvation Kinetics for Low‐Temperature Li─S Batteries 0.87
Fine-Tunning BaCo0.4Fe0.4Zr0.1Y0.1O3−δ-Based Air Electrodes for Reversible Protonic Ceramic Cells via Co-Engineering A-site Deficiency and Nickel Content 0.69
Synergistic Modulation of Zn Anode via Ferroelectric and Zincophilic Cr-Doped ZnO Interface 1.00
Multifunctional Ion/Electron‐Conductive Interlayers for Enhanced Solid‐State Aluminum Batteries 1.00
An Aqueous, Environmental‐Friendly, and Flame‐Retardant Biomass‐Derived Binder for High‐Safe, High‐Rate, and Long‐Life Lithium–Sulfur Batteries 1.00
Antimony Trifluoride-Engineered Hybrid Artificial Interphase Enable Dendrite-Free Potassium Metal Batteries 0.88
Hierarchically Mesoporous Graphene Networks Modulate Homogeneous Two‐Electron Redox Chemistry for Highly Reversible and Stable Zinc‐Air Batteries 1.00
Sustainable APTES-Modified Nano-TiO2/PVA Composite Nanofibrous Separators for Thermally Stable Lithium-Ion Battery 0.86
Electrostatic Catalysis‐Driven Asymmetric SEI for Dendrite‐Free Lithium Metal Anodes 1.00
Electroactive Carbon-Doped Ceramic Membranes With Controllable Macrostructure and Microstructure Toward Efficient Dye Wastewater Treatment 1.00
Biomimetic Porous Hygroscopic Monolith with Vertically Aligned Channels by 3D Printing for Rapid Dehumidification and Regeneration 1.00
Oxygen Reduction Activity Enhancement of Solid Oxide Fuel Cell Cathode via a Tiny Amount of Ni Doping 1.00
Tailoring Anion‐Enriched Solvation Structures in Phosphate‐Based Electrolytes for Safety‐Enhanced Lithium Metal Batteries 1.00
Spinning Dope Modulation Via pH-Triggered Multiscale Sheet-Wire Linkages for Constructing Strong Ti3C2TX MXene Fibers with High Volumetric Capacitance 1.00
Natural Gluten Binder Enabling High-Performance Hard Carbon Anode in Sodium-Ion Batteries 1.00
Multi‐Dimensional Interphase Modulation by Plasma for Construction of Advanced Lithium Metal Batteries 1.00
Coordination-Induced Plastic Ceramic-Ether Coupling Electrolyte for High-Voltage Lithium Metal Batteries 1.00
Flexible, Recyclable, and Highly Conductive Self-Healing Polymer-Based Phase Change Films for Thermal Management 1.00
Unlocking Ultra‐Long Cycle Stability of Li Metal Electrode by Separators Modified by Porous Red Phosphorus Nanosheets 1.00
Competitive Solvation Chemistry Modulated Nonflammable Pseudo Ultralow Concentration Electrolyte Toward High‐Voltage Li Metal Batteries 1.00
Ternary Gel Electrolyte Enabling Wide-Temperature and High-Rate Performance in Aqueous Zinc-Ion Batteries 1.00
Magnetohydrodynamics and Magnetic Interface Enable Stable Zinc Anode 1.00
Reinforced Anti‐Oxidative Degradation and Interface Stabilization in Bimetal Oxide Filler‐Based PEO Electrolytes for Lithium Metal Batteries 1.00
Shrinkage-Resistant Thermo-Responsive Hygroscopic Hydrogel Toward Ultra-Rapid Cycling Atmospheric Water Harvesting 1.00
A Dual-Protective MXene/COF Artificial Interface for Dendrite-Free and Stable Lithium Metal Anodes 1.00
Hierarchical Photothermal Network Spontaneously Facilitates Co‐Extraction of Clean Water and Boron 1.00
Integrated Multiphase Polymer Electrolyte Enhances Bilateral Interface Compatibility in High Nickel Ternary Solid‐State Lithium Metal Batteries 1.00
Less is More: Reducing Evaporation Dead Zones to Tune Thermal Convection in Donut‐Structure Evaporators for High‐Efficiency Interfacial Solar Steam Generation 1.00
A Self-floating Photothermal/Photocatalytic Evaporator for Simultaneous High-Efficiency Evaporation and Purification of Volatile Organic Wastewater 1.00
Enhancing Structural Integrity With Stress‐Resilient Carbon for Stable Potassium‐Ion Storage 0.90
Transfer-Printed Porous Lithium Host with Sulfur Mediated Atomic Tin Clusters for High-Energy-Density and Low-Volume-Change Lithium Metal Pouch Cells 1.00
Integrated Dimeric Naphthoquinone[2,3‐d] Imidazole on Single‐Walled Carbon Nanotubes Enables High‐Rate and Stable Aqueous Proton Batteries 1.00
Deciphering Temperature‐Governed Processes of Lithium‐Mars Gas Batteries 1.00
Balancing the Activity and Stability of Iron-Based Catalysts via Mixed Oxide Species Formation for Electrocatalytic Biomass Hydrogenation 1.00
In-Situ Study of Photo-Rechargeable Aqueous Zinc-Ion Batteries with the Bifunctional α-MnO2 Photoelectrodes 1.00
Synergistic Kinetics Modulation at Graphite Interface Enables Ultrafast and Durable Potassium‐Ion Batteries 1.00
366 336.55
Accelerating OH− Transport for 5000-Hour-Stable Kilowatt-Scale Alkaline Water Electrolysis 1.00
Writable and Recyclable Cellulose‐Stabilized Ga Ink for Deformable Negative Electrode of Flexible Aluminum Battery 1.00
Synergistic Dual‐Interface Engineering of Anode and Cathode Enabling High‐Performance Seawater‐Based Zn–Halogen Batteries 1.00
Solvation Regulation of Flame‐Retardant Bromine‐Based Electrolyte Enables Stable Cycling Dual‐Ion Battery 1.00
Harnessing Multiple Donnan Effects for Simultaneous Salt‐Resistant Solar Desalination and Dual‐Mode Power Generation 1.00
Inert Catalytic Sites Unlocked by Micropollutants for Rapid Water Decontamination with Near‐Complete Chemical Utilization 0.75
Quantifying Gas-Phase Crosstalk and SiO/Gr Reactivity Competition Governing Thermal Runaway in Composite-Anode Batteries 1.00
Unlocking a Novel Pathway for Rapidly Generating Effective Solid Electrolyte Interface Layer Inspired by tRNA Working Mechanism 1.00
Topological Design of Fluorinated Carboxylate-Based Electrolytes for High-Voltage Lithium Metal Batteries 0.93
Biomimetic Porous Carbon of Marine Sponge for High Performance Cathode of Li-S Battery 1.00
Equilibrium Lithiation Dynamics Induced Strain Partitioning Design Minimizing Volume Change of Bulk Alloy Type Anode for Lithium Ion Battery 1.00
Mechanical‐Thermal Decoupling Engineering Unlocks Ultra‐Stable Dry Thick Iodine Cathodes for Ah‐Level Zinc‐Based Pouch Batteries 1.00
Endowing an Intrinsic High‐Capacity Primary Thin‐Film Cathode With Cyclability 1.00
Operando Observation of Inter-Particle Li+ Transport in Layered Bimetallic Sulfides for High-Rate Lithium-Sulfur Batteries 0.64
Data-Driven Cation Engineering Guides Electrolyte Design for Sustainable Aqueous Zinc Battery Chemistries 0.13
Tailoring the Bulk and Interfacial Environments of Hard Carbons for High-Rate and Low-Temperature Sodium-Ion Batteries 0.86
Kilogram‐Scale Water‐Mediated Exfoliation Strategy for Defect‐Free Single‐Layer MXene Nanosheets 0.94
Stress-Mediated Lattice Reconstruction Regenerates Spent LiFePO4 Cathodes 1.00
A Bio‑Chemical Synergy Strategy: Mycelium Separator Breaks the Coupled Degradation Cycle in Aqueous Zn‑I2 Batteries 1.00
Vanadium-Iodine Co-Regulation Enabled by Trifunctional Conjugated Organic Interface for High-Energy and Robust Zn Batteries 0.92
<atl>High‐Entropy‐Tailored id‐p/i Orbital Hybridization for Enhanced Oxygen Reduction Reaction in Perovskite Air Electrodes of Solid Oxide Fuel Cells</atl> 0.80
Elastic Bridging Design of a Fluorine-Free Electrolyte Enables High-Performance Lithium Batteries 1.00
A Universal Janus Biopolymer Separator Enabled Dual‐Interfacial Regulation Toward Dendrite‐Free and Shuttle‐Free Zinc‐Iodine Batteries 1.00
π−Backbonding Interfaces Stabilize Deep Lithium Deposition for High-Performance Anode-Free Solid-State Batteries 1.00
Kinetics-Optimized Crown Ether Engineering Enables Ultra-Flat Lithium Metal Interface for Long-Cycling 532 Wh Kg−1 Pouch Cells 1.00
Undercoordinated Molybdenum Catalysts Enable Ultrafast Quasi-Solid Sulfur Chemistry in Sodium-Sulfur Batteries 0.50
Isotope-Labeling Inspired Lattice-Inherited Rhenium Single-Atom Regulating Local Electronic Microenvironment of Dual-Phase MoS2/MoP Nanotubes for Accelerated Sulfur Redox Kinetics 1.00
Electron‐Induced Molecular Programming Drives Interfacial Chemistry for Ah‐Level Zinc Batteries 0.23
Zincophilic Nanowire Array With Hydrophobic Iodine Elimination Layer for Ultrastable Zinc‐Iodine Battery 1.00
π–π Stacking-Directed Crystallographic Orientation of Zn Elec-trodeposition for Ultralong-Life Anodes 1.00
Manganese‐Based Proton Reservoir Trigger Proton Diversion Effect for Ultrahigh‐Capacity Aqueous Zinc‐Ion Batteries 1.00
Synergy of Multi-Covalent Bonds Enabling High-Performance Aqueous Zinc-Ion Battery Cathodes Toward Industrial-Grade Mass Loading and Broad-Temperature Adaptability 1.00
Direct Photoconversion of Shale Gas into Liquid Oxygenates Over Interfacially Coupled Ni/ZnO Nanomesh 1.00
Weakened Interfacial Hybridization Unlocks High-Capacity Operation of Commercial Spinel Cathodes 0.80
Decoding the Electrodeposition of Zinc Anode With Dynamic Mixed Nucleation Model for Rechargeable Batteries 1.00
Benzonitrile‐Based Electrolyte with Tighter Aggregate Solvation Structure Enables Ultralong Cycling and High‐Rate 4.5 V Lithium Metal Batteries 1.00
Rapid, Large‐Scale, Low‐Energy‐Consumption, Zero‐Carbon Production of High‐Efficiency Electrolytes for Sustainable Zinc‐Ion Batteries 0.88
Overcoming Mechanical-Thermal Trade-Off in Aerogel-Encapsulated Phase Change Composites via Biomimetic Honeycomb Engineering 1.00
Spray‐Freezing‐Templated Vertically‐Graded Macroporous Aerogel Membranes for Ultrahigh‐Flux Filtration of Polydisperse Microplastics 1.00
In Situ Room‐Temperature Spontaneous Gelation Coupled with Asymmetric Viologen for High‐Performance Electrochromic Devices 1.00
Wood‐Structured Electrolyte for Ultra‐Stable Zinc‐Ion Batteries Under High Discharge Conditions 1.00
Embedding Fe-Based Redox Chemistry Into Low-Cost Oxyhalide Solid Electrolytes for High-Performance All-Solid-State Batteries 0.95
Molecular Polarity Attenuation Tailors Weak Solvation Structure with Accelerated Kinetics and Robust SEI for High-Areal-Capacity Large-Format Pouch Zn-Based Batteries 1.00
Proton Sponge Tailoring of Interfacial H-Bond Networks Enables Seawater Electrosynthesis for Concomitant Alkenol and Mg(OH)2 1.00
Redefining Separator Design and Water Activity for High-Energy Zinc Batteries Using Covalent Organic Framework 0.31
Manipulating Ion Chemistry in Biphasic Electrolytes Toward Durable High-Energy Zinc–Bromine Batteries 1.00
Li3N-Enriched Solid Electrolyte Interphase Derived From Interfacial Catalysis Toward High-Performance Lithium Metal Batteries 1.00
Micro-Terraced Surface Induced Directional Two-Dimensional Diffusion Enables Dendrite-Free Zinc Anodes 1.00
Intramolecular Hydrogen Bonds Enhanced Quinone‐Based Anode for High‐Performance Aqueous Proton Batteries 1.00
Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis 0.92
Customized Vertical Zn Deposition and Regulated Interfacial Kinetics via Anti-Inflammatory Biomolecules for Ultra-Stable Zn Metal Batteries 1.00
In Situ Copper‐Mediated Electron Bridge Revolutionizes Aqueous Sulfur‐Based Batteries 0.91
Atomic‐Level Interactions Enable “Near‐Zero Strain” Cathodes for Ultra‐Stable Aqueous Magnesium‐Ion Batteries 1.00
Waste to Catalyst: Tuning Structure and Composition of Ferrous Scrap-Derived Alloys by Rapid Solidification for Advanced Catalysis 0.85
Dual‐Scale‐Patterned Anion Exchange Membrane With Coupled Interface for Durable Water Electrolysis 1.00
A Paradigm Shift in Anode-Free Lithium Metal Battery: Pressure-Activated Solid-State Interfaces for High-Rate Desolvated Cation Diffusion 0.93
Ultrathin Mesoporous Ionic Brushes Separator Enables Fast and Durable Zinc‐Metal Aqueous Batteries 1.00
Unveiling the Role of Curvature in Carbon for Improved Energy Release of Ammonium Perchlorate 1.00
High-Valence-Cation-Induced Lattice Expansion for Activating Li2S Cathode in All-Solid-State Lithium-Sulfur Batteries 1.00
Breaking Single-Reaction Limits: In Situ Visualization of TiS2-Driven Conversion-Intercalation Synergy in Lithium-Sulfur Batteries 1.00
Stabilizing Iodine Redox Mediator Enables High-Performance Aqueous Zinc–Sulfur Batteries 0.97
Bulk-to-IHP Zn Interphase Engineering With Mannitol Additive Enables (002)-Textured Zn Plating With Suppressed Hydrogen Evolution Reaction for Ah-Level Aqueous Zinc-Iodine Pouch Cells 1.00
Alleviating the Misalignment of Fe Single Sites Relative to Triple‐Phase Interfaces to Achieve High Performance Fuel Cell 1.00
Synergistic Ternary Heterostructures Cathode With “Electron-Complementation” Bridging Interfaces Enable High-Performance Zinc-Ion Batteries 1.00
Optimizing f-d Hybridization Descriptor in Rare-Earth Oxides for Efficient Sulfur Catalysis in all Solid-State Lithium–Sulfur Batteries 1.00
Function-Oriented Modular Molecular Design of a Chitin-Derived Self-Healable Binder for Promising Zinc Powder Anodes 1.00
Localized Solvent-Anchored Carboxylate Ester Electrolyte Enables Wide Temperature and Fast Charging Sodium Metal Batteries 1.00
Self-Confinement Effect Enabled by Hollow Carbon Nanoreactor for High-Performance Li–Cl2 Battery 0.90
Directional Catalysis of Sulfur at Highly Ordered Triple‐Phase Interfaces in All‐Solid‐State Lithium‐Sulfur Batteries 1.00
A‐Site High‐Entropy Engineering of Oxygen Electrode: A Promising Route to Durable and Active Reversible Solid Oxide Cells 1.00
Constructing Ion Bridges With Competitive Coordination Effects to Promote Li+ Conduction in Solid-State Electrolytes for High-Performance Lithium Metal Batteries 1.00
Twinning Strain‐Induced Pathway Switching on PtPdRuFe Nanoflowers Enables Efficient Formic Acid Oxidation 1.00
In Situ Reformatsky Reaction‐Induced Surface Polymerization Toward an Oriented Monomeric Structure for Superior Zinc Anode Stability 1.00
Alkaline Leaching: A Facile Surface Activation Strategy to Improve the Reactivity of Air Electrodes for Solid Oxide Fuel Cells 0.08
A High‐Safety Solid‐State Thermally Responsive Separator‐Electrolyte Structure for Flexible Energy Storage Devices 1.00
Edge‐Activated Few‐Layer Bismuthene for Ampere‐Level Vanadium Redox Flow Batteries 1.00
Electric Field Propelled Anion-Type Solvation Structure Reconstruction With Accelerated Kinetics for Low-Temperature Zinc Metal Batteries 1.00
A Bilayer Electrode Architecture Enabling SnO2-Induced Spatial-Controllable Zinc Deposition for Ultra-High-Areal-Capacity Zinc-Based Flow Batteries 1.00
Sulfonate‐Mediated Cation‐Switching in Hydrogel Electrolytes to Unlock Fast Ion Transport for Low‐Temperature Zinc Batteries 1.00
Microdroplet Intaking Spinning Turbine for Active Radiation Fog Harvesting 1.00
A Homo‐Triatomic Molybdenum Cluster Catalyst Enables Synergistic Optimization of Multi‐Step Sulfur Reduction Chemistry 1.00
Sustainable Continuous Scale Synthesis of Positive Material for High-performance Wearable Aqueous Zn Metal Batteries 0.33
Gradient-Modified Li-Rich Manganese-Based Oxides Cathodes with Breakthrough of Kinetic Limitation for High-Performance All-Solid-State Lithium Metal Batteries 0.88
In Situ Synchrotron Radiation and Neutron Diffraction Reveal A-Site Substitution Pathways and Structural Reconstruction in Mo2Ga2C MAX-Like Phase 1.00
Acidic Hydrogel Enables Full-Period Mn2+/MnO2 Conversion in High-Energy Quasi-Solid-State Zn-MnO2 Batteries 1.00
Deciphering Atomic Electronic Structure Dynamics and Site Occupancy Transitions in Dictating Sodium Storage in Hard Carbon 1.00
Engineering Electronic Radial Effects for Fast Li+ Transport in Solid-State Electrolytes 0.23
Biomass-Derived Carbon with Heavy Doping for Anode of Potassium Ion Batteries 0.92
A Gradient Functionalized Separator for Unlocking Latent Cathode Host Sites and Enhancing Zinc Anode DOD in Ultrahigh-Areal-Capacity Static Zn-I2 Batteries 1.00
In Situ Organoselenization for Ultrastable Li−Se Batteries 1.00
Li2S Anti-Passivation Deposition Guided by Electrochemically Self-Generated Thiophosphate Molecular Mediators for Lithium-Sulfur Batteries 1.00
Bimetallic Cladding-Constructed Interfacial Microenvironment Enabled Highly Reversible Powder Anode for Zn Metal Batteries 1.00
Laser-Induced High-Density Bi–F–C Sites to Unleash Potent Li⁺ Adsorption for Stable Lithium Anodes 1.00
Polyamine-Mediated Proton/TFSI− Dual Capture Enables High-Voltage PEO-Based All-Solid-State Li Batteries 1.00
Dynamic Polyiodide-Trapping and Proton-Capturing Dual-Network Engineering for High-Areal-Capacity, Long-Cycling and High-Temperature Zn─I2 Batteries 1.00
Anisotropic Biomass Microfluidics via Directed Moisture Transport and Enhanced Water-Binding Capacity for High-Yield Solar-driven Atmospheric Water Harvesting 0.80
Tailoring Sulfide Particle Size for All-Solid-State Lithium Metal Batteries 1.00
Hierarchical‐Heterogeneous Biogel Electrolytes Regulate Zinc Anode Interfacial Compatibility Towards Green and High‐Performance Solid‐State Hybrid Capacitors 0.91
A High Energy Density Lithium-Sulfur Pouch Cell Via Lignin-Based Ionic Conductive Binder With Oxygen-Rich Coordinating Sites 1.00
Quantum to Device AI-Guided Passivation Paradigm for All-Weather Ultrastable MXene Based Photothermal Converter 0.89
Chemo‑Electrochemical Tandem Catalysis Unlocking Sulfur Reaction in Practical Lithium–Sulfur Batteries 1.00
Customizing Ion Transport by Anionphilic Nanofiber-Polymer Electrolyte for Stable Zinc Metal Batteries 0.90
MOF-Derived High-Entropy Biphasic Sulfides for Zn-I2-S Synergistic Batteries with Machine-Learning-Assisted Prediction and In Situ Synchrotron Spectroscopy 0.93
Dual-Conductivity Optimization Toward High-Rate and Ultralong Life All-Solid-State Lithium-Sulfur Batteries 1.00
Conductive Cation Traps for Synthesizing Efficient and Stable Perovskite Catalysts 0.83
Heterojunction Synergized Nanofluidic Ionic Diode for High-Performance Hydrovoltaic Electricity Generation 1.00
Cascade‐Heterostructured Nanofluidics for Photo‐Enhanced Upscaling Osmotic Energy Generation 1.00
4D‐Printed Dual‐Functional Hydrogels Breaking the Trade‐Off Between Rapid Kinetics and Ultrahigh Water Uptake for Atmospheric Water Harvesting 1.00
Suppressing Electric‐Field‐Induced Cathodic Salt Crystallization for Stable Zinc‐Ion Batteries 1.00
In Situ Polymerized Polysiloxane Enables Cohesive Solid‐Electrolyte Interphase for Practical Lithium‐Metal Batteries 1.00
Gradient‐Heterojunction in Solid Electrolytes for Fast‐Charging Dendrite‐Free Solid‐State Lithium Metal Batteries 0.75
Highly Efficient and Stable All-Weather Moisture Power Generation via Asymmetric Structured Color Photothermal Evaporation-Induced Cotton Fabrics 1.00
Engineering Stress-Potential Coupled Interface on Ultrathin Lithium Anodes Toward 450 Wh Kg−1-Level Long-Cycling Lithium Metal Batteries 0.91
Plasma Design of Alloy-Based Gradient Solid Electrolyte Interphase on Lithium Metal Anodes for Energy Storage 1.00
A Biochar‐Based Composite Hydrogel Microenvironment for Enhanced Biocatalysis 0.48
Energy Density Recovery by Enhanced Hydrogen Bonding for High‐Performance Composite Phase Change Materials 0.92
A Low‐Concentration All‐Phosphate Electrolyte for High‐Voltage and High‐Safety Lithium‐Ion Batteries 0.92
Defect-Driven Ionic Trap Construction and Interface Modulation for Rapid Li+ Kinetics in Composite Solid Electrolytes 1.00
Enabling Dynamic 3D Windmill Evaporator for Continuous Water Desalination, Localized Point Salt Crystallization and Harvesting, and Power Generation 1.00
An Inter-Locking Quasi-Solid Cathode for Zinc-Bromine Batteries with Stable 32000 Cycles 1.00
Synergistic Modulation of HOMO Energy Level and Electronic Structure in Phthalates Anodes Active Materials Enables High-Performance of Li-Ion Batteries 0.90
Collagen‐Derived Nanoconfined Catalytic Membranes for Highly Efficient Water Remediation 1.00
Construction of Robust and Criss‐Crossed LiOH Nanosheets on Lithium Metal Anodes for Stable Lithium–Sulfur Batteries 1.00
Synergistic Strategy of Targeted Capture and Potential Responsive Release for High‐Performance Zinc‐Iodine Batteries 0.60
Ion-Regulating Membranes with Surface-Enriched Charge Networks Enabling Stable Zinc-Manganese Flow Batteries 1.00
Spin‐State Switching Modulates Lewis Acidity in Ferrihydrite for Enhanced Phosphate Capture 1.00
On-Demand Thermal Transport Modulation with Photoactive Nanofluid 1.00
Achieving Bichelating Solvation Structure toward Fast Charging and Long Lifespan Aqueous Zn-Ion Batteries 0.91
Decoupling the Failure Mechanism of 360 Wh kg−1 Lithium-Ion Pouch Cell During Overcharging 1.00
Garnet‐Type Solid‐State Electrolyte with Tailored Lithium Compatibility for High Performance All‐Solid‐State Lithium Batteries 1.00
Faradaic Reversible Electrodes Enable Programmable High-Power Hydrovoltaic Energy Harvesting Across Broad Ionic Environments 0.86
Discovery of D-band Center Engineered Amorphous Cathode with Ultrahigh, Superfast, and Wide-Temperature Zn2+ Storage Capability 1.00
Molecular Association Chemistry Enables High‐Voltage Fast‐Charging Lithium Batteries 1.00
Synergistic Defect Engineering in Ca-Based Pellets for Durable and High-Absorptance Solar Thermochemical Energy Storage 1.00
Biomimetic TPMS Structure-Based Entangled Hydrogel for Efficient Solar-Driven Atmospheric Water Harvesting 0.88
La(OH)3-Based Lithium Ionic Conductor for Quasi-Solid-State Lithium Metal Batteries 0.25
Microphase‐Separated Hydrogel Electrolytes with Selective Ion Transportation Pathways for Flexible Zinc‐Ion Batteries 1.00
Decoding Lithium Metal Battery Degradation with Symmetric‐Cell Artificial Intelligence Diagnostics (SAID) 1.00
Aqueous Sodium Humate Binder Enabling Ultra‐Stable High‐Voltage Cathodes via Protection from Interface to Bulk 1.00
Metallophilic Non-van der Waals Roll-ups Engineered for Long-Life Metal Batteries 1.00
Circumventing Self-Diffusion Enables High-Rate Hard Carbon Anodes 1.00
Steric-Hindrance Effect Induced Fabrication of Lightweight, Bi-Functional, and Easy-to-Infiltrate Hosts for 502 Wh kg−1 Lithium-Sulfur Batteries 0.89
Integrated Hollow Microfibers of Covalent Organic Framework on Cu Foil as a Gradient Zn Metal Anode Host for Bottom‐Up Deposition 1.00
Cyclically Regenerated Solid‐State Bulk‐Phase Electrocatalyst for Fast‐Charging Lithium‐lon Batteries 1.00
A Lean‐Water Hydrogel Electrolyte with Engineered Water‐Lubricated Pathways Constructed by Unique Water‐Inter‐Micelle Structure 1.00
Electron Percolating Shielded Interlayer Enabling Ultrastable All‐Solid‐State Lithium Metal Batteries 1.00
4.5-V-Class Safe Lithium-Ion Batteries with Silicon-Majority-Graphite Anodes Enabled by Self-Limiting Interphase 0.89
Close-Loop Cathode Chemistry Enables Self-Rejuvenating Aqueous Zn–Te Batteries Compromised by Non-Equilibrium Redox Pathways 0.92
Trace‐Level Green Bio‐Derived Amino Acid Molecular Leveling Agent Enables Dendrite‐Free and Long‐Lifespan Zinc Metal Anodes 1.00
MXene Membrane as Multifunctional Interface for Vapor Splitting via Photothermal-Catalytic Membrane Distillation 0.88
Bond-Discretization in Nickel Oxide to Boost Capacity for Rechargeable Nickel─Zinc Batteries 1.00
Trace Chlorine-Induced Lattice Oxygen Activation for Enhanced High-Temperature CO2 Electrolysis 0.93
Regulation of Proton Vehicle Migration for Synergetic Interfacial Stability Enables Long‐Lasting Ah‐Level Zinc‐Ion Batteries 0.75
Micelle-Like Electrolyte Design for 4.6 V Li||NCM811 Cells Workable at 70 °C 1.00
Tailoring Li3N-Contained Complementary Gradient Solid Electrolyte Interphase in High-Performance 3.2 V Aqueous Lithium-Ion Batteries 1.00
Moisture‐Light Harvesting Enhanced Hydrovoltaic Electric Generation 1.00
Dual-Electrode Synergistic Electrolyte Enabling Highly Reversible Multi-Electron Redox in Aqueous Zinc-Iodine Batteries 1.00
Cost‐Effective Passive Ammonia Fuel Cells via Synergistic Integration of Optimized Membrane Electrode Assembly and Prototype 1.00
Self-Evolving Gradient Alloy Layer Enables Stable Al Foil Anode for High Energy Lithium Batteries 1.00
Flexible, Stackable, and Fully Active Thick Electrode with Scalable 3D Topology Braid Structure Enables Supercontinuous Electron/Ion Transport 1.00
Quantum Size Effect Synergizes Space-Limited Domain Action for Advanced Aqueous Zinc-Iodine Batteries 0.92
Interface Layer Engineering of Zinc Anode for Durable Seawater-Based Zinc-Ion Batteries 0.96
Reactivating the Current Collector: A Catalytic Strategy for Carbon‐Free Sulfur‐Based Cathodes 1.00
High‐Acceptor Fluoroalcohol Mediated Anion‐Solvation Enables Durable Zn‐V Batteries 1.00
Double Eutectic Electrolytes With Optimized Inner-Outer Solvation Shell Engineering for Interphase-Stabilized Zinc-Metal Batteries 1.00
Valence-Adaptable Ni/Co Catalysis for High-Rate Sodium–Sulfur Batteries with Wide-Temperature Operation from −20 to 50 °C 0.90
Network-Driven Ion Transport in Robust In Situ Polymerized Electrolyte-Integrated Cathodes for Long-Life Structural Batteries in Intelligent Sensing Platforms 1.00
Salt Ice VI as Solid-State Electrolytes 1.00
High-Performance Electrochemical Chloride Ion Storage with Hierarchical Ternary Metal Hydroxides for Sustainable Water Purification 1.00
High‐Compaction Spherical Carbon with Tunable Rich Pore Structures for Efficient Sodium Storage 1.00
In-Plane Exposed Metal Sites in Covalent Organic Frameworks for High-Performance Lithium Sulfur Batteries 0.83
In Situ Thermally-Driven Radial Heterophase Evolution of δ-Bi2O3 Modulates the p-Block Bi 6p Orbitals and p-Band Center for Enhancing Sulfur Redox Reactions 1.00
V2O3 with Se-Enhanced d-p Orbital Hybridization Toward Highly Stable Aqueous Zinc Batteries under 10 A g−1 0.86
Bioinspired Hierarchical Radiative-Phase Change Hybrid Cooling Composite with Record-Breaking Cooling Power 1.00
Ivy‐Inspired Design of Polymer Gel Electrolytes for Fiber Lithium‐Ion Batteries with High Stability 1.00
Tailor-Made Solar Desalination and Salt Harvesting from Diverse Saline Water Enabled by Multi-Material Printing 0.57
Mechanically Assisted Li+-Conduction in Crown Ether-Covalent Organic Frameworks for Lithium Metal Batteries 1.00
Hygroscopic‐Evaporative Generator for Multiform Energy Harvesting from Environment and Food Storage 1.00
Balanced Anion-Cation-EO Interaction Enables Ultrahigh Lithium-Ion Transport in 4.5 V-Class PEO-Based All-Solid-State Lithium Batteries 1.00
Regulation of Interfacial Ion Transport via Honeycomb-Architected Covalent Organic Frameworks for Lithium Metal Batteries 1.00
Localized Water Confinement via Micellar Electrolyte for Aqueous Zinc-Vanadium Batteries 1.00
Dilute Electrolyte with Vehicular Aggregates for Stable High‐Energy Lithium‐Metal Batteries 1.00
Tilted Crack‐Engineered Photothermal Membranes Achieve Attenuation‐Free Solar Evaporation and Oil Recovery From Emulsions 1.00
Self-Powered Green Hydrogen Production via Osmotic Energy Harvesting 1.00
All Solid State Battery with Soft Carbon–TiSi2 Multilayer Structure for Optimized LiSi Anodes 1.00
pH-Dependent Phosphates Conformal Coating Enabling 5.0 V Graphite Cathodes Over 10,000 Cycles via Reinforced Mechanical Strength and Optimized Interphase 1.00
Ladder-Type Covalent Organic Frameworks with Highly Delocalized π-Electrons and Dense Redox-Active Sites toward Robust Aqueous Iron Organic Batteries 1.00
Multi-level Zn2+-Buffering Interphase Enabled by Hierarchical Nanostructure Engineering of Gel Polymers for Highly Reversible Zinc Metal Anode 1.00
Taming Interfacial Ion-Dipole Interactions With d-Orbital Delocalized Electron Catalysis Expediates Low-Temperature Li Metal Batteries 0.94
Long-Life Lithium Metal Batteries Enabled by In Situ Solidified Polyphosphoester-Based Electrolyte 0.90
Polymerized Melamine Catalyzes Direct I−/I2 Conversion via ─N═N─ Motif for HighCapacity Zn-I2 Batteries 0.91
Regenerative Hydrovoltaic Power Generator with Remarkable Duration and Fast Power Generation Achieved by Deep Eutectic Biomass Complex 1.00
An Ionomer‐Free Gapless Catalyst‐Bridging Membrane Electrode Assembly for High‐Performance Pure Water‐Fed Anion Exchange Membrane Electrolyzer 1.00
Thermal Expansion Matching as a Key Criterion for Developing High‐Performance Mn‐based Mullite Cathodes in SOFCs 1.00
Dual-Zone Chloride Engineering to Enable Ultra-Stable Two-Electron Zinc-Iodine Batteries 0.50
Crystal Growth Engineering for Dendrite-Free Zinc Metal Plating 0.58
Tailoring Electrode-Electrolyte Interfaces via Electrolyte Additive Engineering for Reliable 5 V-Class 500 Wh Kg−1 Lithium Metal Batteries 1.00
Mechanically Induced Bridged Interlayer Enabling Highly Reversible All-Solid-State Sulfur Cathodes 1.00
Mechanochemical Nitrous Oxide Decomposition 0.24
Adaptive and Multifunctional Emulsion Solar Evaporators with High Operating Stability in Extreme Environments 1.00
Evaporation‐Driven Dual‐Function Wood Composites: Integrating Hydrovoltaic Generation and Thermal Management in Architectural Applications 1.00
Anion‐Type Solvation Structure Enables Freeze‐Tolerant Aqueous Zinc‐Vanadium Batteries 1.00
Stabilizing the High Spin Cobalt Atoms by Local Magnetic Asymmetry in p-Block Metals-Doped Spinel MnCo2O4 Catalysts for Efficient Oxygen Reduction 1.00
Integrating High-Entropy Alloy Nanocatalysts with Aligned Porous Air Electrode for High-Power Zinc–Air Battery 1.00
Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium–Sulfur Batteries 0.15
Enhancing Reactive Oxygen Species Generation and Pollutant Adsorption in Advanced Oxidation Processes with Cation Vacancy-Driven Dual-Site Mn2SiO4 Catalysts 1.00
Photogenerated Carrier Reconstructed Ion Concentration Gradients for Moisture Electricity Generators 1.00
From Irreversible to Reversible: Nucleophilic Reactions Enhance Fast Kinetics and Superior Cycling Stability in High Voltage Lithium‐Organosulfur Batteries 1.00
Flexible and Dynamic Interfacial Desolvation in High-Entropy Electrolyte for Dendrite-Free Aqueous Zinc-Ion Batteries 0.91
Dynamic Protective Multi-Layers for MnO2 Cathodes: Ion Sorting and Structural Protection for Superior Zinc-Ion Battery Cycling Performance 1.00
Nucleophilic Redox Shuttle Surpasses the Efficiency Limitation of Oxygen Redox Electrochemistry 1.00
Understanding the Zeta Potential in Regulating Zn Deposition Kinetics for Zn‐Ion Batteries 1.00
Click Chemistry‐Inspired Fixation Catalysis for Long‐Life Zinc–Iodine Batteries 0.96
Grain Boundary Strengthening Enables Microstructural Regulation of Electrolytes for Robust Zinc Metal Batteries 1.00
Surface Segregation Reconstructing Alloy Substrate for Ultra‐Stable Zinc‐Based Batteries 1.00
Adaptive Localized Ectopic Structure Enhances Regeneration of Spent Lithium‐Ion Battery Cathodes 0.63
Symmetry-Engineered Carbon Scaffold for Interface-First Sodium-Sulfur Batteries 0.14
Critical Role of Ultra-Microporous Tunnel Structure Within Hard Carbon in Boosting Sodium-Ion Storage 0.90
Dual‐Metal Synergy in Sn‐Sb‐CNF Membrane Anodes Boosts Electro‐Filtration Oxidation of Emerging Contaminants 1.00
Potential‐Gated Polymer Integrates Reversible Ion Transport and Storage for solid‐state Batteries 0.89
Intensifying D‐Orbitals Energy Level Splitting of Local Co Atoms in CoO Lattice for Accelerated Iodine Redox Kinetics 1.00
Lewis Acid-Driven Weak Electrostatic Interaction of Polybenzimidazole-Based Membrane for Alkaline Zinc-Iron Redox Flow Batteries 1.00
Structure‐Tunable Fluorinated Polyester Electrolytes with Enhanced Interfacial Stability for Recyclable Solid‐State Lithium Metal Batteries 0.63
Orbital-Tailoring Strategy via Dual-Defect Engineering in P-FeTe2-x@NC Synergizes Polysulfide Adsorption-Conversion for Lithium-Sulfur Batteries 1.00
Evaporation‐Driven Fabric for Synergistic Water‐Electricity‐Lithium Co‐Production 1.00
Turbulent Flow-Driven Synthesis of Graphene-Skinned Boron Nitride Heterostructures for Dendrite-Free Potassium Metal Batteries 1.00
Worse Interference of Fe3+ than Fe2+ on Degrading the Interphase and Performance of LiFePO4||Graphite Battery 1.00
Solar‐Mechano Symbiosis Dual‐Mode Janus Bioaerogel for Context‐Adaptive Atmospheric Water Harvesting Beyond Solar Reliance 1.00
Breaking the Conversion Limit in an Intercalation‐Type Cathode by Loosening Aqueous Cation Coordination 1.00
Modulating Interfacial Solvent Aggregation Chemistry to Enable Low‐Temperature Sodium‐Ion Battery 1.00
Dual‐Cation Solvation Polymer Gel for Ultra‐Stable Zn Anodes in Rechargeable Flexible Zn‐Air Batteries 1.00
Data-Driven Additive Discovery with HOMO-Descriptor Enables Durable Aqueous Zinc Batteries via Interfacial Kinetics Engineering 0.75
Tailoring Solvation Structures via Precise Diluent Engineering for High-Rate 500 Wh kg−1 Lithium-Metal Batteries 1.00
Enhancing Catalysis and Sieving Polysulfides by Oxygen Vacancy‐Rich Separator Modifier for High‐Performance Li‐S Batteries 1.00
Dynamic Regulation for the Well-Distribution of Electrons and Zn2+ Ions Achieving Uniform Zn Redox in Ah-Scale Pouch Cells 1.00
Converting Li‐Rich Layered Oxide Cathode into Non‐Shrinking Sacrificial Prelithiation Agent 0.95
Sustainable Clay Electrolytes for Aqueous Batteries: All‐Temperature Single‐Ion Conductor with Nanoconfined Hydration Shell Reorganization Effect 0.78
Size‐Induced High Entropy Effect for Optimized Electrolyte Design of Lithium‐Ion Batteries 1.00
In Situ Construction of a High‐Entropy Perovskite Based Tri‐Phase Composite Electrode toward Efficient Reversible Solid Oxide Cells 1.00
Robust Sustainable Interfacial Evaporators from Lignin for Wastewater Treatment 1.00
High Latent‐Heat, Soft yet Robust Crystalline Salogels via Dual‐Network Design and Solvent Engineering 1.00
Isoquinoline as an Electrolyte Additive for Electrolytic Zn−MnO2 Batteries: Superior Cycling Stability and Areal Capacity 0.89
Heteroatom‐Modulated Asymmetric Cobalt Single‐Atom Catalysts on MOF‐Derived Carbon Enabling Durable Zinc‐Iodine Batteries 0.86
Solvation Design of an Interfacial Self‐Compatible Quasi‐Solid Electrolyte for High‐Loading Sodium‐Based Dual‐Ion Batteries 1.00
Optimizing the Electron Density of PVDF‐HFP‐Based Solid Polymer Electrolyte by Donor–Acceptor COF Toward High‐Performance Solid‐State Lithium Metal Batteries 1.00
Origin of Synergy in Bicomponent Metal Nitride–Metal Single Atom Catalysts for Advanced Lithium–Sulfur Batteries 1.00
Additive-Regulated Interface Chemistry Enables Depolarization for Ultra-High Capacity LiCoO2 1.00
Cation‐Selective Defects Engineering in A‐Site Ordered Layered Perovskites for High‐Performance Reversible Protonic Ceramic Cells 0.80
Solar‐Driven Atmospheric Water Production Through Hierarchically Ordered Porous Carbon for Self‐Sustaining Green Hydrogen Production 0.45
High‐Entropy Single‐Atom Evaporator: Collaborative Omnibearing Light Trapping Stereo Structures for Efficient Water Transport Dynamics 1.00
Thermite Reaction-Induced Thermal Runaway of Lithium-Ion Batteries 0.88
Unveiling Scale‐Design Principle at Electrical Confinement Materials for Water Purification 0.67
High-Performance Double-Drive Water Evaporation-Induced Generator Operating Without Liquid Water Sources 1.00
Supercritical CO2-Induced Surface Autogenous Mineralization Enabling Epitaxial Zn Electrodeposition on Weakly Conductive Crystalline Coating 0.67
Hyaluronic Acid with Double Helix Ion Channels for Efficient Electrolyte Retention and Polysulfide Regulation in Lean‐Electrolyte Lithium–Sulfur Batteries 1.00
Stretchable, Adhesive, Anti‐Freezing Hydrogel Electrolytes with Dual‐Functional Water Regulation Enabled by Amide Group–Salt–Water Interactions for All‐Climate Zinc‐Ion Batteries 1.00
Ah‐Level Large‐Format Fiber‐Shaped Lithium‐Ion Batteries Enabled by Effective Field Homogenization 1.00
A Dipole‐Engineered Electrolyte Paradigm to Overcome Desolvation Barriers for Exceptional Ultralow‐Temperature Energy Storage 1.00
Solar Trap‐Adsorption Photocathode for Highly Stable 2.4 V Dual‐Ion Solid‐State Iodine Batteries 0.60
Electric Field‐Guided Ion Orchestration for Multi‐Chemistry Zinc Metal Batteries 1.00
Unlocking Grotthuss Proton Energy Storage in Pyrochlore‐Type Tungsten Oxide 1.00
Enhancing Li+ Kinetics Via Selective Repulsion-Adsorption and Intermolecular Ion-Conduction Layers for High-Energy-Density Anode-Free Lithium-Metal Batteries 1.00
Harnessing Squid Bone for Ultra‐Permeable Water Purification Membranes 1.00
Ultra-Long Life Solid-State Lithium Metal Batteries Enabled by 3D-Printing of Integrated Porous Cathode/Composite Polymer Electrolyte with Dynamic Covalent Bonds 1.00
Fast Potassium-Ion Conduction in K3LnSi3O9 (Ln = Y and Gd) Enabled by P-Doping Toward Ultrastable Quasi-Solid-State Batteries 1.00
Harnessing Rapid Li+/Hδ+ Exchange within the Electric Double Layer for High Performance Li-Ion Batteries 1.00
Rational Design of High‐Entropy Garnet Electrolytes via Computational Screening for Stable Lithium Interfaces in All‐Solid‐State Batteries 1.00
Invoking Hybrid‐Ion Correlation Electrochemistry to Enable Optimal Aqueous Zn‐Ion Batteries 0.92
Anchoring Unimolecular Metal Chloride as a Sterically Active Site for Conformal Zinc Electrodeposition 0.62
Non-Drying Hydrogel Polyelectrolytes via Polymer-Assisted Cation Solvation-Confinement Toward H2O for Ultrahigh-Voltage Aqueous Micro-Supercapacitors 1.00
Competitive Ion Coordination in Gel Polymer Electrolytes Enables Decoupling of Mechanical Strength and Ionic Conductivity 1.00
Vacancy Functionalized MoSsub2/sub Nanolaminated Membranes for Efficient Sieving in Forward Osmosis 0.88
The Synergy Between In Situ Gradient Polymerization and Phase Separation Enables Practical Solid‐State Ni‐Rich Lithium‐Ion Batteries 1.00
Macromolecular Boron‐Based Salt Enables Dense Interphases for Long‐Cycling Lithium‐Sulfur Batteries 1.00
Achieving Abnormal Evaporation Behavior Using Melanin/Cellulose‐Based Solar Evaporators via Salt Ion Enrichment 1.00
Element‐Engineered Lithium Borate for High‐Efficiency Prelithiation in Silicon‐Based Lithium‐Ion Batteries 1.00
Topological Transformation of MXenes to Non‐Van Der Waals Artificial Solids with Well‐Defined Structure 1.00
Achieving Ultrafast Monovalent ZnCl+ Ion Transport in MOF-Based Zn Ion Solid-State Electrolyte through Polyanion Strategy 1.00
A 1000 Wh Kgsup−1/sup Cathode Facilitated by In Situ Mineralized Electrolyte with Electron Potential Well for High‐Energy Aqueous Zinc Batteries 1.00
Highly Reversible Zn Anode by Ion Flux Regulation and Micro‐Corrosion Zone Division 1.00
Interfacial Coordination Engineering to Boost Li‐Ion Conduction in Economic Zr‐Based Halide Electrolytes 1.00
Creep Localization Empowering High‐Capacity Alloy Anodes for Durable All‐Solid‐State Lithium Batteries 1.00
Synergistic Compound Additives for High‐Performance Lithium–Sulfur Batteries 1.00
Calcium-Based Bifunctional Lewis Acid-Base Sites Induce the Directional Generation of Radical in Catalytic Ozonation 1.00
Unveiling Competitive Coordination in Aqueous Lithium‐Ion Electrolytes through Solvent Descriptor Engineering 1.00
Revisiting the Impact of Anion Selection on Sulfur Redox Reaction Kinetics for High Sulfur Loading Lithium–Sulfur Batteries 0.06
Revealing the Catalysis Modes for Sulfur Conversion Kinetics in Molten Salt Aluminum‐Sulfur Batteries 0.91
A Tri‐Mode Photothermal, Phase‐Change, and Radiative‐Cooling Film for All‐Day Thermoelectric Generation 0.78
Spatiotemporal Evolution in Hard Carbon Synthesis via Electrothermal Coupling Strategy for High‐Performance Sodium‐Ion Batteries 0.92
Coupling Tensile Strain and Electronic Modulation in Mesoporous PdMo Metallene Nanoveins for Improved Oxygen Reduction 0.96
Sandwich‐Model Cathode Electrolyte Interphase Facilitating All‐Climate High‐Voltage Nickel‐Rich Cathode‐Based Lithium Metal Batteries with LiBFsub4/sub‐Based Electrolyte 1.00
Molecularly Engineered Rigid Ultra‐Micropore Membranes for Ultrahigh‐Power Osmotic Energy Harvesting from High‐Temperature Hypersaline Brine 1.00
Thermodynamically Self‐Assembly Hydration‐Cycle Crystals for Multidimensional Off‐Grid Water‐Energy Nexus 0.88
π‐Conjugated Microporous Hydrocarbon Electrodes for High‐Capacity and High‐Voltage Lithium‐Ion Capacitors 1.00
Fluoroether Design Enables High‐Voltage All‐Solid‐State Lithium Metal Batteries 0.25
Deciphering the Species‐Dependent Polysulfide Corrosion on Lithium Anode Toward Durable Lithium–Sulfur Batteries 1.00
Modularized Cathode with Neural Network Topology for High Rate and Fault‐Tolerant Lithium‐Sulfur Batteries 1.00
Fluoroethylene Carbonate‐Enabled Gel Polymer Electrolyte for Stable High‐Voltage Lithium Metal Batteries 1.00
Catalytic Solder Fuses Solid‐Solid Interfaces for All‐Solid‐State Lithium‐Sulfur Batteries 1.00
Fast-Charging MXene/TiN-Confined In2Se3 Anode with Dual Hydrogen-Bonding Synergy for High-Capacity Ammonium-Ion Storage 1.00
Ultrathin Polymer Electrolyte With Fast Ion Transport and Stable Interface for Practical Solid‐state Lithium Metal Batteries 0.53
Photo-Induced Dynamic Catalytic Domains for High-Performance Lithium-Sulfur Batteries 1.00
A Non‐Concentrated Gradient‐Solvation Electrolyte Enables a High‐Voltage Lithium Metal Battery with 447.6 Wh Kgsup−1/sup 1.00
Halogen Ion‐Mediated Hydrothermal Synthesis of Diverse MXenes with Tailored Heterostructures 1.00
A High-Capacity Semiconductor Organic Polymer for Stable Aqueous Ammonium-Ion Storage 0.72
Fukui Function‐Engineered Gel Electrolytes: Thermodynamic/Kinetic‐Synergistic Regulation for Long‐Cycling Zinc Metal Batteries 1.00
Unlocking the Potential of MOFs Anodes via Solid‐State Corrosion Prelithiation for High‐Energy Li‐Ion Batteries 1.00
Ion‐Framework Electrolyte Featured Zinc‐Ion Transport for Solvent and Interphasial Co‐Passivation 0.89
Modulating Dynamic Deprotonation Evolution via Sacrificial Solvation Structure to Mitigate Zinc Electrochemical Corrosion and Cathodic Structure Deterioration for High‐Stable Zinc‐Vanadium Batteries 1.00
A Biomimetic Copper Silicate‐MOF Hybrid for Highly Stable Zn Metal Anode 1.00
Minimizing Solvent-Coordination in Ether Electrolytes for Lithium Metal Batteries under Extreme Operating Conditions 1.00
All‐Polymer Polyethylene‐Hydrogel Felt for Efficient Evaporative Cooling and Ecological Restoration in Photovoltaic Power Plants 1.00
High‐Performance Bioinspired Rechargeable Cement‐Based Batteries for Low‐Carbon Self‐Powered Buildings 1.00
Multitarget Generate Electrolyte Additive for Lithium Metal Batteries 0.81
An Ultrathin Membrane with Bubble‐Raft‐Inspired Single‐Layer Nanofibrous Networks for Efficient and Low‐Resistance Air Filtration 1.00
Microscopic‐Level Anion amp; Diluent Chemistry in Electrolyte for Aqueous Supercapacitors Operating at High Voltage and Low Temperature 1.00
Nanosecond Laser Synthesis of MXene-Derived TiO2/High-Entropy Alloys for Photo-Assisted Zinc–Air Batteries 0.90
Crystallinity‐Induced Ion Rectification in Polymer/Zn Interphases for Stable Aqueous Zinc Batteries 1.00
Highly Efficient Cooling via Synergistic Electro‐Thermal Phase Changes 1.00
Manganese–Based Metal–Organic Coordination for Aqueous Zinc–Ion Batteries With Varying Mechanical Adaptability and Machine Learning–Assisted Performance Decoding 0.93
Breaking the Reversibility Barrier in Zn‐Air Systems With Dual‐Electrolyte Engineering 1.00
A Hydrogen‐Aided Rechargeable Battery 1.00
An Elastomeric Electrolyte Based on Lithium-Ion-Selective Transmembrane Transport for Solid-State Lithium-Sulfur Batteries 1.00
Molecular Engineering of Polymer Brushes Enables Lithium–Sulfur Battery Stable Operation under Ultra‐Wide Temperature Range 1.00
A Hydrophobic and High Surface Charge Phosphate Interphase for High Areal Capacity Zinc Metal Batteries 1.00
Dynamic Gradient Oxygen Layer Enables Stable Sn Anode for Lithium Storage 1.00
Inner-Layer Indium Doping Achieved Highly Active and Stable Sulfur Vacancies in MoS2 for Superior Sulfur Redox Kinetics 0.90
Polymer‐Regulated Solvation and Interphase Engineering for Long‐Life and Safe Quasi‐Solid‐State Anode‐Free Sodium Batteries 1.00
Hierarchically Structured Hollow Fiber Membranes for Efficient, Selective, and Scalable Mercury Ion Removal from Water 0.92
From Physical Cross-Linking to Tailored Phosphorylation: Unlocking High-Performance and Biocompatible Xanthan-Konjac Hydrogels for Zinc-Ion Batteries 1.00
Designing an Anionic Layer in Low‐Concentration Electrolytes to Promote In‐Plane Ion Diffusion for Dendrite‐Free Zinc‐Ion Batteries 0.50
Enhanced Kinetics and Stability of Zn-MnO2 Batteries with a Multifunctional TiO2 Coating 1.00
A Bipolar Solvent Molecule Design for Wide‐Temperature High‐Voltage Lithium Metal Batteries 1.00
Long‐Lifespan and High‐Rate Energy Storage Enabled by Lithium‐Free Batteries with External Li Supply 1.00
Toward Practical Photo-Assisted Li-O2 Batteries: a Four-Electron Pathway Enabled by Ru-Doped β-MnO2 1.00
Cracked Metal–Phenolic Networks with Durable Confinement Capillarity for Enhanced Solar Desalination 0.80
Directionally Modulated Zinc Deposition by a Robust Zincophilic Cu‐Phthalocyanine Protective Layer in Dendrite‐Free Aqueous Zinc Ion Batteries 0.86
Revealing the Underlying Role of Li2CO3 in Enhancing Performance of Oxyhalide-Based Solid-State Batteries 1.00
A Robust and Tough Composite Hydrogel Electrolyte with Anion‐Locked Supramolecular Network for Zinc Ion Batteries 1.00
Robust Mix‐Charged Polyzwitterionic Hydrogels for Ultra‐Efficient Atmospheric Water Harvesting and Evaporative Cooling 1.00
Interface Design of Solid–Liquid Hybrid Electrodes for High‐Energy‐Density Flexible Lithium‐Ion Batteries 1.00
Atomic Scale Engineering of Multivalence‐State Palladium Photocatalyst for Transfer Hydrogenation with Water as a Proton Source 0.69
Oxygen Vacancy-Li2ZrO3: A New Choice for Boosting Homogenous Distribution and Transport of Lithium Ion in Composite Solid-State Electrolytes 1.00
Multi‐Agent‐Network‐Based Idea Generator for Zinc‐Ion Battery Electrolyte Discovery: A Case Study on Zinc Tetrafluoroborate Hydrate‐Based Deep Eutectic Electrolytes 0.67
Sonicated Carbon Nanotube Catalysts for Efficient Point‐of‐use Water Treatment 0.14
Hybridizing Electrode Interface Structures in Protonic Ceramic Cells for Durable, Reversible Hydrogen and Power Generation 0.17
High-Spin Cobalt Enables Strong Metal-Sulfur Orbital Hybridization for Accelerated Polysulfide Conversion in Lithium-Sulfur Batteries 1.00
Topology Fortified Anodes Powered High‐Energy All‐Solid‐State Lithium Batteries 1.00
CO2-Responsive Smart Wood Scaffold for Natural Organic Matter Removal without Secondary Pollution 0.17
Anisotropy Engineering for Constructing Gradient Electrodes with High‐Efficiency Bi/C Catalyst In Situ for Iron‐Chromium Flow Battery 1.00
Lithium-Ion Batteries with Superlong Cycle-Life in Wide Temperature Range via Interfacial Alkyl-Chain Sway 1.00
Cyclable Micron‐Sized Silicon‐Based Lithium‐Ion Batteries at −40 °C Enabled by Temperature‐Dependent Solvation Regulation 0.93
Water Oxidation to Hydrogen Peroxide Over a Super‐Aerophilic Graphite Catalyst 0.03
Functionally Segregated Ion Regulation Enables Dual Confinement Effect for Highly Stable Zinc‐Iodine Batteries 1.00
Steric Hindrance-Induced Amorphous Lithium Sulfide Deposition Accelerates Sulfur Redox Kinetics in Lithium–Sulfur Batteries 0.93
Thermoelectric Field Enhanced Sulfur Evolution Kinetics for High Performance Lithium-Sulfur Batteries 1.00
Photothermal-Responsive Aerogel-Hydrogel Binary System for Efficient Water Purification and All-Weather Hydrovoltaic Generation 1.00
Formation Mechanism and Molecular Structure of Sulfurized Polyacrylonitrile 1.00
Fast‐Charging Phosphorus Anodes Enabled by Fluorinated Weakly Solvated Electrolytes for Stable and High‐Rate Lithium Storage 0.89
Enabling Targeted Zinc Growth via Interface Regulation Toward Binder Free and High Areal Capacity Zinc Metal Anode 1.00
Crosslinked Hetero-Chain Polymeric Interphase Enables the Stable Cycling of Li-Rich Mn-Based Lithium Metal Batteries 1.00
Ultrapure Graphite from Solid Refining 1.00
Atomically Dispersed Co–Ru Dimer Catalyst Boosts Conversion of Polysulfides toward High-Performance Lithium–Sulfur Batteries 1.00
A Durable and Highly Active Oxygen Electrode for Solid Oxide Cells: New Insight into Segregation Suppression of Layered Perovskite 1.00
Ultrathin Electrolyte Membranes With Reinforced Concrete Structure for Fast‐Charging Solid‐State Lithium Metal Batteries 1.00
In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries 1.00
14 12.87
Online Electrochemical Detection of O2– in Molten Carbonates 1.00
Assessment of Micromixer Design in Microfluidic Chips via Mixing Efficiency Measurement Using Contactless Conductivity Detection 1.00
Explainable Deep Learning–Guided Screening of LiNO3-Based Molten-Salt Phase Change Materials for Lithium-Ion Battery Safety 0.17
Interfacial Hybridization-Enabled Chemiresistive Detection of Battery Electrolyte Vapors under Humid Conditions Using Polyoxometalate-Derived Dendritic WO3/Au Sensors 1.00
Signal-Enhanced Dielectric Barrier Discharge Microplasma Coupled to GC for Sensitive Analysis of Low-Molecular-Weight Gases in Swollen Lithium Polymer Batteries 1.00
Dual-Synthesis Ti3C2/SnS2 for NH3 Detection: High Sensitivity and Fast Response/Recovery 1.00
Tracking the Electrochemical–Mechanical Evolution by Coupled Operando X-ray Diffraction and Strain Monitoring 1.00
Quantitative Study on Fast Kinetics of Hydrodynamic Liquid Absorption of CO2 Microbubbles Enabled by Microfluidic Visualization and Computational Fluid Dynamics Method 0.89
Integrated Stable Isotope Tracing and Acidified Potassium Iodide Reduction (SIT-APIR) Method to Determine Microbial Nitrification Rates across Environments 1.00
Low-Temperature Decarboxylation and Sensitive Detection of Trifluoroacetic Acid on the Interface of Active Amino Nickel Metal Organic Layers 1.00
Hybrid-Fueled OV-CuFe-CNT/MnO2/GOx Micromotor for Colorimetric Detection and Degradation of Captopril via Free Radical and Nonradical Mediated by Oxygen Vacancy 1.00
Visualization of the Heterogeneous Shrinkage of Electrode Sheets during Charging in Lithium-Ion Batteries 1.00
In Situ High-Temperature Raman Spectroscopy and Simulations for Correlating Structure Evolution with Viscosity in the Binary Potassium Titanate System 0.82
Monitoring O2– Behavior during Electrolysis in Molten CaCl2 1.00
517 488.53
Dual Polyamide Thin-Film Composite Membrane With Multiscale Hetero-Channels and Mosaic Charge Architecture for Boosting Ion Transport and Osmotic Energy Conversion 0.80
Interfacial Proton‐Coupled Electron Transfer Reverses Water Inhibition for Selective 5‐hydroxymethylfurfural Hydrogenation 1.00
Boosted Durability and Diffusion Kinetics of High‐Potential Azopyridines for Aqueous Organic Flow Batteries 1.00
Two‐Dimensional Mesoporous Tungsten Oxynitride/Carbon Nanosheets: Enabling High‐Performance Lithium‐Sulfur Batteries 0.83
A Bifunctional Descriptor Inspired by Electron-Donating Ability for Regulating Dendrite Growth and Parasitic Reactions in Zinc-Ion Batteries 0.89
Interfused Graphene Fiber Membranes Enable Volumetric Electron-Transfer Advanced Oxidation via Interlayer Site Activation 1.00
A High-Metal-Content 2D Conjugated Metal-Organic Framework With a Bis-Salphen Architecture for Dendrite-Free Sodium Metal Anodes 1.00
Diffusion‐Selective Tandem Catalysis for Alkane Hydroisomerization 0.96
Inter-molecular Channel Gated Ion Migration for High Performance Zinc-ion Batteries 1.00
Process‐Driven Protonation in Benzothiadiazole‐Integrated Covalent Organic Frameworks: Activation of Peroxymonosulfate for Pollutant Oligomerization via Dominant Electron Transfer Process 1.00
Trinity Cooperative Electrode as a High‐Performance Electrocatalytic Host for Ultra‐Stable, High‐Rate Zinc–Halogen Batteries 1.00
Quasi-Crowding Solvation Design of Ionic Liquid Electrolytes for Stable High-Temperature Potassium-Ion Batteries 1.00
Dissimilar Electrolyte Decouples Zn and MnO2 Redox Chemistry Enabling Dual-Electrode-Free Lean-Electrolyte Batteries 0.67
Spatially Proximate Acid Sites in Zeolites Synergistically Boost Alkane Activation 1.00
Efficient I−/I3−/I2 Conversion and Shuttle-Suppression in High-Rate Ah-Level Zinc-Iodine Batteries Enabled by Bifunctional Confined-Catalyst ZrB2/AC Host 1.00
Interfacial Water Reorientation in Gadolinium-Doped Ru/RuOx Heterostructures Boosts Alkaline Hydrogen Oxidation Electrocatalysis 1.00
Decoupling Site-Selective CO Poisoning From Hydrogen Oxidation Activity on Pt/C in PEMFCs 1.00
Adaptive Brønsted Acidity From Heterolytic Dihydrogen Activation Enables Polyethylene Hydrogenolysis Over Pd-Encapsulated Na-Zeolites 1.00
Solvent-Induced Covalent Bond Softening Boosts Battery Voltage 0.86
Solvent Anchored Electrolytes for Lithium-Ion Batteries Working at High Voltage and Wide Temperature 1.00
Conjugated C≡C Linked Organic Polymers With Thiadiazole-Induced Electron-Ion Decoupling Toward Long-Life Lithium Metal Anode 1.00
Engineering Ferroelectric Dipole Superstructure via Phase Transformation for Stable Zinc Anodes 1.00
Single‐Atom Barium‐Mediated Hydrogen‐Bonding Interaction via Mortise‐and‐Tenon Interlock for Rechargeable Biomass Electrooxidation in Pure Water 1.00
Biomimetic Gradient‐Porous Carbon Enables Sustainable High‐Loading Lithium–Sulfur Batteries by Regulating Polysulfide Chemistry 1.00
Regulating Dynamic Solid Electrolyte Interfacial Evolution via α-H Methyl Substitution Carboxylate Ester Electrolytes Toward 20 Ah Wide-Temperature (−60°C∼70°C) Li-Ion Pouch Cells 1.00
Cationic Organic Polymers With Electrostatic Shielding Effect and Lithiophilic Sites for Dendrite‐Free Lithium Metal Batteries 1.00
An Amorphous Polyimide‐Based Positive Electrode for High‐Capacity and Durable Aluminum Dual‐Ion Batteries 1.00
Coupling Space Charge Storage With Alloying Reactions Anode for Ultrafast and High Energy Storage 1.00
<atl>Highly Dispersed Molybdenum Carbide Clusters Enable Efficient CO sub2/sub Hydrogenation</atl> 1.00
Electrochemically Assembled π–π Stacking Organic Radical-Decatungstate With UV-SWIR Solar Absorption for Efficiency Solar-Thermal Conversion 1.00
Current Collector Design Principle for Long-Cycling Aqueous Zinc Batteries With Minimal Anode Usage 0.50
Electric-Field-Driven Assembly of Ultrathin and Crystalline iCOF Membranes for High-Performance Molecular Sieving 1.00
Programmable Diacetylene‐Bridged Cyclotetrathiophenes With Nonplanar π‐Expanded Skeleton for Electrochemical Sodium Storage 1.00
Integrating Hydrogen Dissociation and Spillover Sites Into Platinum Confined SAPO-34 Zeolite Unlocks Efficient CO2 Hydrogenation to Light Alkanes 1.00
Solvation-Mediated Free Energy Stabilization Enables Li/CFx Pouch Cells Over 800 Wh kg−1 via Minimizing Heat Dissipation 1.00
Engineering of Lewis Acid Sites in Mesoporous Zeolite Achieves Record Fructose Yield of 71.5% for Glucose Isomerization in Ethanol 1.00
Synergistic Interface-Bulk Regulation of Biopolymer Electrolytes for Advanced Zn-Iodine Batteries With Four-Electron I−/I0/I+ Conversion 1.00
Cathodic-Potential-Induced Amorphous TiOx Layer for Glycerol Valorization 1.00
A High-Energy Aluminum-Fluorinated Carbon Battery Enabled by Chemical Bond Activation in Molten Salt Electrolytes 1.00
Cooperative Spin Alignment Enhances Selective Singlet Oxygen Generation in Wastewater Pre-Oxidation System 1.00
Fluorine Sustained‐Release Gel Polymer Electrolytes for High‐Energy‐Density and Wide‐Temperature Solid‐State Lithium Batteries 1.00
Ultrathin Microporous Poly(quaternary ammonium) Membrane for Lithium Extraction and Recovery 0.86
Bond Softening and Elastic Confinement of Monolithic Dense Binary Alloys for High Volumetric Capacity of K-Ion Battery Anodes 0.73
Ultrafast Ionic Cross‐Phase Transport in Nanofluidics for Simultaneously Boosting Osmotic Energy Conversion and Lithium Recovery 0.98
Stabilization of Alkanol–Alkanone Heteroclusters in Medium-Pore Zeolites Drives Orders-of-Magnitude Rate Enhancements in Proton-Catalyzed Dehydration Reactions 1.00
A Weak‐Aggregation Electrolyte Enables Lithium‐Ion Capacitors at Ultra‐Low Temperature 0.87
A General Chemical Prepotassiation Strategy for Boosting the Zn-Storage Performance of Polymorphic MnO2 Cathodes 1.00
Engineering Bulk Compression and Surface Tension Strains Toward Anaerobic 5-Hydroxymethylfurfural Photoconversion 1.00
Unlocking Latent Titanium Active Centers Through the Synergistic Effect of Oxygen Vacancies and Boron Doping for Accelerated Sulfur Redox Reactions in Silicon‐Sulfur Batteries 1.00
A Smart Non‐Sacrificial Interphase for Improved Lithium Reversibility in Anode‐Free Solid‐State Lithium Metal Batteries 1.00
Machine‐Learning‐Assisted Screening of Electrolyte Additives for Aqueous Zinc‐Ion Batteries via a Molecular Descriptor Framework 1.00
All‐Cyclic‐Solvent Electrolyte Design Enables Ultra‐Low‐Temperature and Fast‐Charging Sodium‐Ion Batteries 1.00
Interfacial Hydration Engineering Synchronizes Hydrogen Evolution and Brucite Mineralization in Seawater Electrolysis 0.93
Molecular Descriptor‐Directed Microstructural Regulation of Asphalt‐Derived Hard Carbons for Advanced Sodium‐Ion Batteries 1.00
Water‐Cluster–Mediated Amorphous‐to‐Crystalline Transition Enables Scalable Fabrication of Stable Surfactant‐Free MOF Nanocatalyst 1.00
Dual-Redox Conjugated Bipolar Covalent Organic Framework Enables High-Voltage Symmetric Proton Batteries 1.00
Main‐Group Magnesium Single‐Atom Lewis Acid Sites: A CO‐Tolerance Booster for Alkaline Hydrogen Oxidation Reaction 1.00
Dihydrogen Bond Cooperativity Resolves Zero-Linear Compressibility in an Energetic Crystal 1.00
Spin-Regulated Fe-Cu Diatomic Catalytic Chemistry Enables Significant Minimization of Catalyst Consumption With High-Efficiency Fenton-Like Activity 1.00
Zwitterionic Engineering of Vinylene-Linked Covalent Organic Frameworks for Superior Protonic Electrolytes 0.85
Boosting Dehydration via Coupling With the Water‐Gas Shift Reaction 1.00
Functional Polymer Synthesis From CO, CO2, and Butadiene 1.00
Coupled Electronic-Catalytic Regulation in All-in-One VN/B2O3 Ceramic Enables Fast Polysulfides Conversion in Li-S Batteries 0.89
Hierarchical Solvation Chemistry via Ether–Ester–Cosolvent Synergy Enables High-Performance Lithium-Metal Batteries at a Low Temperature 1.00
Uniform and Stable Dual Frustrated Lewis Pairs Enabling Highly Efficient Conversion of CO2 With Hydrogen-rich Molecules 1.00
A Self-Assembled Single-Ion Membrane via In Situ Neutralization Enables Triple Stability in Ultrahigh-Nickel Cathodes 1.00
Interlayer Covalent Reinforcement-Enabled Lattice Reprogramming for Durable Capacitive Deionization 1.00
Localized Surface Plasmon Resonance Effect for Near Full-Spectrum Photo-Enhanced Osmotic Energy Harvesting 1.00
Multiscale Engineering of PEO Electrolytes for High-Voltage and Ultrastable Solid-State Lithium Batteries With Exceptional Room-Temperature Performance 1.00
A Zincophilic and Negatively-Charged Self-Reconstructed Stratified Interface for Regulating Zn2+ Conduction and Nucleation Toward Conformal Dendrite-Free Deposition 1.00
Low‐Temperature Hydrogen Production From Liquefied Petroleum Gas via Mechanochemistry 1.00
Tailoring Coordination Micro‐Environments in Metal‐Based Molecular Complexes to Homogeneously Catalyze Li─S Battery Reactions 1.00
Relay Storage of Protons and Zinc Ions Enables Practical High-Mass-Loading Organic Electrodes 1.00
Selective Upcycling of Polycarbonate Waste to Cyclohexanol via RuLa Dual-Atom Catalysis 0.89
Multifunctional Molecular Engineering Enables Simultaneously Dendrite‐Free and Corrosion‐Resistant Zinc‐Halogen Batteries 0.92
Asymmetric Electrolytes Govern Tetrahydroxozincate Dynamics for Stable Alkaline Zinc Batteries 1.00
Imidazolium Cation-Stabilized Interfacial Chemistry for Durable Aqueous Cadmium-Iodine Batteries 0.20
Machine Learning‐Guided Design of a Flexible Highly Conductive Additive‐Free Polymer Cathode 0.84
Methyl Asymmetric Interference‐Enhanced Dipole–Dipole Interaction for High‐Performance Potassium–Graphite Battery Electrolyte Design 1.00
Supramolecular Nanoconfinement‐Accelerated Synthesis of Two‐Dimensional Styrenic Polymers Boosting Proton Conductivity in Nafion‐doped Membranes 1.00
Modulating Electron Delocalization Structure in Covalent Organic Frameworks Through Conjugation and Hybridization to Boost Li‐ion Migration Dynamics 1.00
Proximity Engineering of Fe‒N4 Twins for Oriented Generation of Singlet Oxygen for Hospital Wastewater Treatment 0.79
Tri(Thiophene-Nitrile) Covalent Organic Frameworks With Low HOMO/LUMO Donor/Acceptor for High-Potential-Plateau Zinc Batteries 1.00
Synergistic Rh1–Cu1 Dual-Atom-Site Enhancing Performance of Ethane Low-Temperature Oxidation via Auto-Selective Oxygen Source From O2/H2O 1.00
Ultra‐Low‐Cost Hydrophobic Organic Coating for Highly Reversible Zinc Anodes 1.00
Anodic H2O2 Production via CO32−/HCO3−-Mediated Spillover Effect in Three-Phase Electrochemical System 1.00
Proton Exchange Membranes from Microemulsion‐Synthesized COF Nanosheets for Water Electrolysis 1.00
Anion Pillars Enable High Energy Density Sodium Dual-Ion Battery With Ultra-Long Cycle Life 0.11
Regulating Lithium Bond to Reduce Polysulfide Parasitic Reactivity for High‐Stability Lithium Metal Anode 1.00
Local Polarity Engineering via Unsaturated Cu–N3 Sites for Enhanced Iodine Redox Chemistry in Zinc-Iodine Batteries 1.00
Multi‐Scale Architecture Regulation of Hard Carbons for High‐Efficiency Sodium Storage Across Ambient and Subzero Conditions 0.78
Phosphorus-Induced Charge Redistribution and Lattice Self-Regulation in Cu3PSe4 Enables Low N/P Ratio and Durable Zn–I2 Batteries 1.00
Phosphorus Vacancy‐Engineered Ultrathin RuP Nanosheets for Accelerated and High‐Capacity N‐Ethylcarbazole Hydrogen Storage 1.00
Steering Zeolite Brønsted Acidity and Catalytic Consequence Through Manipulating the Coordination Environment of Framework Aluminum 1.00
Molecular-Level Energy Dissipation and Micropore Engineering Synergistically Enhance Anion Exchange Membrane Performance 1.00
Biomass-Derived Ion-Selective Binder Modulates Zn2+ Solvation Enabling High-Capacity Cathodes in Aqueous Zinc Batteries 0.80
Interfacial Electronic Nanoarchitectonics for Sustainable Zn─I2 Batteries 1.00
Mild‐Condition Upcycling of Polyolefins Enabled by Micropore Confinement in Zeolites 1.00
Nucleophilic Substitution Enables Robust Fluorinated Interphase for Low N/P Ratio Zinc Battery 0.90
Reinventing Phosphorus Anodes: Taming Pulverization via Strain‐Induced Interfacial Coupling 0.86
Interfacial Radical Reaction Enables High-Performance Graphite Anode for Potassium-Ion Batteries 1.00
Expediting Desolvation–Diffusion Kinetics by Self-Cascade Catalysis for Durable Low-Temperature Zinc Metal Batteries 0.87
Visualizing and Understanding the Reaction‐Coupled Ion Grotthuss Transport in Single‐Crystal Organic Battery 1.00
Unlocking Full State‐of‐Charge of Polyoxometalate for High‐Energy‐Density Redox Flow Batteries via Concerted Proton‐Electron Transfer 1.00
Continuous‐Flow Modular Reactor with a Chiral Microenvironment Enhances the Biocatalytic Synthesis of Norepinephrine 1.00
Gaseous SO2 Additive for High-Energy-Density Li-Ion Battery 1.00
Descriptor-Inspired Oligomer Additives Enabling Long-Life Zinc Metal Batteries 1.00
Robust Interface Enabled by Bicontinuous‐Structured Electrolyte Elastomers for Solid‐State Battery Applications 1.00
Mitigating Concentration Polarization via Ion-Sieving Interlayer Towards Long-Life 510 Wh Kg−1 Lithium Metal Pouch Cells 1.00
Sustaining Electrooxidation of Concentrated Thermo-Sensitive Biomass Feedstocks by Temperature-Mediated Kinetic and Interfacial Control 1.00
Dual‐Salt Chaotropic Eutectic Electrolyte for Enhancing Low‐Temperature Zinc‐Ion Batteries 1.00
Monodentate Formate‐Mediated Toluene Methylation to Xylene at Low Temperature Using Formic Acid and Hydrogen 0.86
Atomic Level Fabrication of Oxychloride Interface for High‐Rate and High‐Voltage Lithium‐Ion Batteries 0.58
Multilayer Sulfide‐Electrolyte Engineering Stabilizes Interfaces for Long‐Cycling, Wide‐Temperature Lithium–Organic Solid‐State Batteries 1.00
Steering Pulsed Electrochemistry Selectivity Toward Singlet Oxygen via Dynamic Intermediate Management 1.00
Structurally Asymmetric Nonplanar π‐Conjugated Naphthoquinone Derivatives Modified from Natural Lawsone for High‐Stability Aqueous Redox Flow Batteries 1.00
Geometric Preorganization Enables Entropy‐Constrained Proton Migration for Ultrafast and Stable Aqueous Proton Batteries 1.00
Ga-Induced Reversal of Pd Electronic States in ZrO2-Supported Pd2Ga1 Nanoparticles for Enhanced Ethanol Electrooxidation via the C1 Pathway 0.86
SSZ-13 Zeolite with Isolated Co2+ Sites as an Efficient and Durable Catalyst System for Non-Oxidative Ethane Dehydrogenation 0.25
Selectively Electrocatalytic Reductive Dehydroxylation of 2-butene-1,4-diol to 3-buten-1-ol over Cu Nanowire Arrays at Industrial Current Densities 1.00
Facet-Dependent Solid Frustrated Lewis Pairs on Co3O4 Catalysts Towards Semi-Hydrogenation Reaction of Alkynols 1.00
Dynamic Semiconductor Interface for Scalable Photoelectrochemical Synthesis of Chlorine Disinfectants from Natural Seawater 1.00
Binding Energy‐Assisted Oxidation Potential as a Measure of Prelithiation Capability 1.00
An Energetic S0/S+ Redox Chemistry for Aqueous and Nonaqueous Sulfur Batteries 1.00
A High-Entropy Hydrogel Electrolyte Generated by Intrinsically Disordered Polymer Segments for Efficient Zinc Metal Batteries 0.33
Machine Learning–Guided Solvation Engineering of Chiral Viologens for Durable Neutral Aqueous Organic Flow Batteries 1.00
Unveiling Anion‐Cation Interaction of Electrolyte for Long‐Life Ah‐Level Aqueous Zinc Metal Batteries 0.82
Rational Design of Asymmetric Lithium Salts with Multi-Functional Capabilities for Stable Lithium Metal Batteries 1.00
A Low‐carbon Space‐Isolated Zinc Hydrolysis for Harvesting Hydrogen and Salts from Seawater and Wastewater 1.00
Biomimetic Anchor‐Capture Effect of Multidentate Electrolyte Additive for Ultrastable Aqueous Zinc Ion Batteries 1.00
A Surface Non-Destructive Modification Strategy Addressing Moisture and Oxidation Instabilities of Sulfide Solid-State Electrolytes 1.00
Low-Temperature Aluminum-Zinc Hydrogen-Aided Battery 1.00
Single Halide Electrolytes for High-Performance Mn Metal Batteries 1.00
Directional Electron Transfer in Island-Sea Structured Contact-Electro-Catalysis Enables Cascade Defluorination of PFAS 1.00
Interfacial Charge Orchestration for Durable Aqueous Zn Batteries 1.00
Differential Adsorption of Functional Groups by Ru/Co Driving Tandem Catalysis: Converting Furanic Molecules into Linear Alcohols 1.00
Zwitterion-Induced Interfacial-Potential Regulation Stabilizes Micron-Sized Silicon Anodes in Quasi-Solid-State Lithium-Ion Batteries 1.00
Potential-Tailored Aryl–Sodium Reagent with Moderate Ionic Binding Strength Enables Precise yet Fast Hard Carbon Presodiation 1.00
A Fluorine‐Free Chaotropic Electrolyte Promoting Zinc Peroxide Chemistry for Non‐Alkaline Zinc–Air Batteries 1.00
Reversible Na+/I− Dual-Ion Chemistry by Electrolyte Engineering Enables High-Rate and Long-Lifespan Energy Storage Device 1.00
Hydrophobic Association Enabled Salt-Concentrated all-Cellulose Hydrogel Electrolytes for High-Temperature Zinc-Ion Hybrid Supercapacitors 1.00
Ferroelectric‐Field‐Steered SEI Engineering for Long‐Life Lithium‐Metal Batteries 1.00
High‐Entropy Reorganization and Core‐Shell Confinement Engineering for Full‐Spectrum Solar Absorption and Spatial Thermal Localization in Dynamic Solar Evaporator 1.00
Breaking the Trade-Off Between Activity and Stability in Reverse Water–Gas Shift Reaction by Forming Highly Active Pt─O─Na─Si Unit Within Silicalite-1 Catalyst 1.00
Patching Solid Electrolyte Interphase via Modulating Anion Decomposition Reactions for Stable Lithium Metal Batteries 1.00
Spatially Orchestrated Oxygen Motifs Decouple Ion Dissociation/Migration in Liquid Crystal Elastomer for High‐ Performance Solid‐State Li Metal Batteries 1.00
Dynamic Li+ Respiration Effect Enables Cascade Conversion of Lithium Polysulfides for Li–S Batteries 1.00
Molecular Design of Nitrile Electrolytes Enabling Lithiated Silicon–Sulfur Batteries with Quasi-Solid-State Sulfur Reaction 0.87
Unveiling Residual Charge Effects in the Direct Regeneration of Spent LiFePO4 1.00
Atomic Fe‒P Pairs Eliminate H2O2 Migration Barriers for Sustainable Electro-Fenton Water Treatment 0.89
Dual-Functional Additive Reshapes Lifetime Limit of Potassium-Ion Batteries 1.00
A Diffusion-Retarded Strategy for Practical Zn–I2 Batteries Under Harsh Conditions 0.73
Amphiphobic Solvent‐Mediated Relay Push‐Escape Strategy for Highly Efficient Lithium‐Metal Batteries 1.00
Molding of Li5.5PS4.5Cl1.5 Particles Based on Regulating Li+ Transport for All-Solid-State Li Metal Battery 0.97
Vertically Aligned Metal–Organic Framework Arrays as Protective Layers for Durable Zinc Anodes with Low Overpotentials 1.00
Ultralow H2O2-Triggered Electron Transfer over Single-Atom Iron Catalysts for Long-Term Recyclable Fenton-Like Reactions 1.00
Scalable Roll-to-Roll Dry Processing of 10 mAh cm−2 Iodine Cathodes for Establishing Ah-Level Aqueous Zn–I2 Pouch Cell Evaluation Protocol: Bridging Laboratory Research and Industrial Application 1.00
Surface Charge‐Modulated Electric‐Double‐Layer Structure on Pt Catalyst for Efficient and Durable Sulfur Reaction in Li–S Batteries 1.00
Electrolyte-Free Electrosynthesis of Pure H2O2 via Triple-Phase Interface Engineering 1.00
Topological Structure Design of Ether Solvents for Lithium Storage Chemistry in Graphite Anode 1.00
Organosulfur‐Rich Porous Carbon Cathode Enables Soluble‐Polysulfide‐Free and High‐Rate Potassium‐Sulfur Batteries 0.88
Uncovering the Electrochemical Origin of Alkalization in Viologen‐Based Aqueous Flow Batteries 1.00
Seawater Electrosynthesis of Hydrogen Peroxide at Industrial‐level Current Densities Enabled by Pentagonal Defect‐Rich Nanocarbon with Chlorine Doping 0.88
Electrochemical Shortcut Denitrification Coupled with Chemical Diazotization for Low‐Carbon Nitrate Wastewater Treatment 1.00
Covalent Organic Framework Membranes with Polyelectrolyte‐Mediated Hierarchical Nanochannels for Ultrafast and Selective Water Decontamination 1.00
Hydrogenation Rearrangement of Furan Compounds to Cyclopentanones Catalyzed by CoNC with In Situ‐Generated Uniform Metal–Acid Pairs 1.00
Superior Room‐Temperature Anhydrous Proton Conduction in 3D Porous Benzimidazole Membranes Enabled by Strong Acid Confinement 1.00
Constructing Robust Hydrogen Bond Networks in Electrolytes for Long-Life Zinc-Ion Batteries 1.00
Solvation-Competing Nitrile Polymer Gel Electrolyte for High-Voltage Quasi Solid State Lithium Metal Batteries 0.89
Synergistic Dual‐Single‐Atom Catalysis Driving Auto‐Catalytic Process Toward Oxidant‐Free Fenton‐Like Chemistry for Water Purification 1.00
Orientation-Engineered Anderson-Type Polyoxometalate Sub-1 nm Nanosheets for High-Performance Lithium-Ion Battery Anodes 1.00
Recyclable Turing‐Structured Polymer Electrolytes for Sustainable Solid‐State Batteries 1.00
Energy-Efficient Electro-Fenton Oxidation Enabled by CoCu Dual-Atom Catalysts with High Oxygen Utilization 0.58
First-Order Phase Transformation in Highly Concentrated Electrolyte for High-Rate and Long-Cycle Aqueous Zn-Ion Battery 1.00
Balancing Oxidative Stability and Ion Transport in Quasi-Solid Polymer Electrolytes via Chlorine-Driven Halogenation Engineering 1.00
Microemulsion Engineering Reconciles Propylene Carbonate Electrolytes and Graphite Anodes for All-Climate Lithium-Ion Batteries 1.00
Anchored Zn(002) Orientation with Rapid Interfacial Response Guiding High-Utilization Alloy Anode and Ah-Scale Aqueous Zinc Metal Batteries 1.00
An All‐Solid‐State Li–Cu Battery via Cuprous/Lithium‐Ion Halide Solid Electrolyte 1.00
Polymer-Nanodomains Regulation for Optimized Ionic Translocation Enabling High-Voltage and Practical Utility Lithium Metal Batteries 1.00
Pollutant-Powered Oxygen Activation by Enzyme-Inspired Self-Sustaining Catalytic Membranes for Water Purification 1.00
Rechargeable Aprotic Zinc–Oxygen Batteries with Reversible ZnO Formation on Cathodes 0.92
Bifunctional Cationic Covalent-Organic-Framework for All-Solid-State Proton Batteries with High-Rate and Ultra-Stable Cyclability 1.00
Ru Single Atoms Anchored on Multicomponent Metal Oxides for Enhanced Chlorine Evolution and Reactive Oxygen Species Generation 1.00
Asymmetrically Fluorinated Alkoxysilane Single-Solvent Electrolytes Enable High-Voltage and Long-Cycling Lithium Metal Batteries 0.64
Solvation-Shell Engineering Enables Additive-Dominated Coordination for Stable Silicon Anodes Under Minimal Salt Conditions 1.00
Inverse NiOx-Ag Interface to Decouple Reactant Activation for Ag-Ni/SiO2-Catalyzed Ester Hydrogenation 1.00
Aquatic Environment Breaks the Size Confinement of the TiO2 Anodes in Aqueous Batteries 1.00
Tailoring Cathode Interphase Chemistry for High-Voltage Li-ion Batteries 1.00
Minutes-Scale Ultrafast Synthesis of New Oxyhalides Solid Electrolytes with Interfacial Ionic Conduction for All-Solid-State Batteries 1.00
Oxalate-Bridged Binuclear Fe(II) Drives Concerted Two-Electron Reduction of NO2 by Substantial Spin Interactions 1.00
Photoinduced Proton-Cation Cascade Boosting Ion Intercalation Dynamics in Photo-Assisted Zinc-Ion Batteries 1.00
Pollutants Transformation During the Regeneration Process of Fluid Catalytic Cracking Catalysts 1.00
Weakly-Solvated and Co-Intercalation-Free Ether-Based Electrolytes Enhance the Low- Temperature and Fast-Charging Performance of LiFePO4||Graphite Batteries 1.00
Polyanion Electrointercalation Enables Termination-Tailored Oligolayer Ti3C2Tx MXene Synthesis in Alkali Chloroaluminate Melt 1.00
Chloride‐Bridged Compact Interfacial Shielding for Practical Seawater Zinc Batteries 1.00
“Living Nanosheets” of Covalent Organic Frameworks Aligned into Laminar Membranes for Sharp and Durable Molecular Separations 1.00
Transient‐Promoter‐Stabilized NiFe Oxyhydroxide Enables Durable kW‐Scale Water Splitting Under Fluctuating Power 0.50
Engineering Nanoscale Interfacial Solvation Inner-Outer Configuration via Multi-Group Synergy for Practical Zinc Batteries 1.00
Structural Effects in Polyoxometalate‐Based Supramolecular Assemblies for Enhanced Proton Conduction 1.00
Phase‐Transition Intervention Engineered Amorphous Vanadium Oxide for High‐Performance Aqueous Zinc‐Ion Batteries 0.91
An Organic Sacrificial Salt with Low Decomposition Potential Driven by Substituent Effect Enables High-Performance Lithium-Ion Batteries 1.00
Chlorinated-Solvent-Based Electrolyte for Safe and Stable Lithium Battery Chemistry 0.83
Molecular Templating and Boron-Doping Guides Twisted Microcrystalline Formation in Coal-Derived Hard Carbons for High-Rate Sodium-Ion Storage 1.00
How Does the Precursor Influence the Li‐Rich Layered Oxide Cathode? 1.00
A Universal Principle of Lithium Bond Characteristics in Lithium Battery Electrolytes 1.00
Electroactive Chelating Groups Enable High‐Performance Aqueous Zinc‐Organic Batteries 0.80
A Zinc Solvation‐Tailored Deep Eutectic Electrolyte for High‐Performance Zinc‐Ion Batteries 1.00
Dynamic Bridging Ligand-Induced Regulated Coordination Chemistry for Highly Reversible Zn-Metal Anodes 1.00
Programmable Pulsed Acidic Water Oxidation for Enhanced H2O2 Production 1.00
Electrostatic Landscape Design for Ionomer Adhesion and Poison‐Resistant Platinum Catalysis in Fuel Cells 0.73
Cation-π Mediated Weak Solvation Chemistry Enables Dendrite-Suppressed Gel Polymer Electrolytes 0.83
Stable Four-Electron Zinc-Iodine Battery Realized by Polyacrylamide as Catalytic Binder 0.91
Membrane-Free Direct Seawater Electrolysis via Redox Mediator for H2 Production 1.00
Sparingly Solvating Electrolyte with Hofmeister Selectivity for Practical Long‐Lived Li–Se Batteries 1.00
Ultralow-Lattice-Mismatched Near-Zero-Strain Zn (0002) Anodes for Stable Zinc Metal Batteries 1.00
Zn2+ Storage via Conversion Chemistry of α-MnO2 in an Organic Electrolyte 1.00
Solvent's Covert Role: Concerted Anion‐Solvent Co‐Intercalation Rewrites Voltage Rules for Dual‐Ion Batteries 1.00
High-Loading Gel Cathodes Enabling Energetic Zinc Metal Batteries with Device-Level Capacities Beyond 100 Ah L−1 1.00
High-Performance Lithium-Sulfur Batteries: Medium-Entropy Alloys Embedded in CeO2 for Polysulfide/Sulfide Bidirectional Catalysis 1.00
Anion-Induced Bridged Electrolyte Design Strategy Mitigates Capacity Decay in Lithium–Sulfurized Polyacrylonitrile Batteries 1.00
Deciphering Mn2+ Solvation and Interfacial Chemistry for Rechargeable Nonaqueous Mn-Metal Batteries 1.00
A Theory‐Driven Moderation Strategy for Electrolyte Design Unlocks Stable Aqueous Zinc Deposition 0.15
Ni‐Bridged Biphasic Molybdenum Carbide Interfaces: A Synergistic Catalyst for High‐Performance Lithium–Selenium Batteries 0.58
Breaking Solubility Limitation via Molecule Design to Build Localized Ultrahigh-Concentration Electrolytes for Lithium Metal Batteries 1.00
Double-Donor and Anion-π Polymer Electrolytes for Fast Li+ Conduction in Lithium Metal Batteries 1.00
Catalytic Nano-Reactor Engineering of Metal Single-Atom Site and Metal-Free Chemical Group for Accelerating Sulfur Redox Electrocatalysis 1.00
Organic Microemulsion Electrolytes for Advanced Metal Secondary Batteries 1.00
A Universal pH Regulation Principle for HER Suppression in Aqueous Metal Batteries 0.89
In Situ Chemical Construction of Ultrathin Zn2+-Conductive Interphase for Dendrite-Free Zinc Metal Batteries 1.00
Design of Cryogenic Electrolyte with Organic-Free Solvation Structure for Wide-Temperature Zinc Metal Batteries 0.65
Repurposing Waste Chemicals to Engineer Redox Mediators for Selective Active Species Modulation in Photo‐Fenton‐Like Systems 1.00
Endogenous Template‐Directed Topological Engineering of Lignite‐Derived Hard Carbons for Kinetically Accelerated Sodium Storage 1.00
High-Selectivity Electrocatalytic Oxidation of Glycerol to C3-Glyceraldehyde Coupled to H2O2 Production 1.00
Choline Iodide‐Mediated Sulfur Conversion and Zinc Plating/Stripping Chemistry in Aqueous Zn–S Batteries 1.00
Discriminative Peroxymonosulfate Activation on Iron Carbides for Redox-Neutral Singlet Oxygen Generation 1.00
Pre‐Polymerization and Pre‐Etching Dominated by Carbon Dots to Fabricate the Sub‐Nanometer Microporous Carbon for Supercapacitors 1.00
Failure‐Mechanism‐Driven Inverse Design and Optimization Procedure for Battery Lifetime Extension 1.00
Tuning Solvation Structure Via Inductive and Steric Hindrance Effects for High-Voltage LiCoO2 Batteries 1.00
AlCl4−-Deficient Eutectic Electrolytes Enable Reversible Iodine Redox-Amphoteric Conversion for Aluminum Battery Cathodes 0.06
Quantification and Optimization of Interfacial Ion Transport in Polymer/Ceramic Composite Electrolytes for Solid‐State Batteries 1.00
Permselective Covalent Organic Framework Membrane as Self-Extinguishing Separator for High-Safety Lithium-Ion Battery 1.00
Improving Tandem Epoxidation Efficiency via Hydrogel Confinement Effect towards Photoelectrochemical Propylene Oxide Synthesis 1.00
Polymeric Diaminophenazine with Spiral Architecture as Cathode Materials for Ultra-Stable Aqueous Zinc-Organic Batteries 0.79
Boosting the Ionic Conductivity of Non‐Aqueous Proton Electrolyte for Hybrid Capacitors 1.00
Unlocking High‐Concentration PET Upcycling via Site‐Decoupled Copper Catalysis 1.00
Hydrogenation of CO2 to Propylene and Butene Over ZnZrOx/SAPO-18 1.00
Artificial Photosynthesis of Glycolaldehyde and Syngas from Plastic Feedstocks via Boron‐Functionalized Nickel Species on CdS 0.17
Hofmeister “Salting-In” Assisted Slurry Homogenization for Ultra-Thin Sulfide Solid-State Electrolytes 1.00
Hydrogen Atom Capture Toward Dense Solid Electrolyte Interface for Long‐Cycling Aqueous Zinc‐Ion Batteries 1.00
Helical Poly(isocyanide anthraquinones)-Based Cathodes for Long-Cycling Lithium Metal Batteries 1.00
Anchoring and Competition: Weakly Solvated Structure of Glymes Enhances Stability in Lithium Metal Batteries Operating under Extreme Conditions 0.55
Continuous Dual Hydrogenation of Biomass Substrates in a Membrane‐Free Solid Electrolyte Reactor 1.00
Advanced Self-Phase-Separating Electrolytes for High-Performance Lithium-Sulfur Batteries 1.00
Entropy‐Driven Modulation of Ion Clustering and Polymer Crystallinity for Low‐Temperature Lithium Metal Batteries 0.88
Emerging Nitroso/Hydroxylamine Redox Chemistry for High-Performance Organic Cathodes in Aqueous Proton Batteries 1.00
Reverse Modulation of Carbon‐Interface Electron Density via s‐d Block High‐Entropy‐Alloys Boosts Li–S Batteries 1.00
Lean‐Water Gel Electrolyte Enables Zinc Ion Battery at −70 °C 0.90
Ultrathin Aromatic Polyamide Membranes with Tunable Microporosity for Molecular Sieving 1.00
Noble Metal‐Free Low‐Temperature Aromatization of Polyethylene Waste for High‐Quality Fuel Production 1.00
Interrupting the Hydroxide Enrichment-Induced Electrode Degradation Loop for Achieving Stable Aqueous Zn-I2 Batteries 1.00
Proton-Resistant N-Heterocycle-Linked TEMPO Catholytes for Long-Lasting Neutral Aqueous Organic Redox Flow Batteries 1.00
Molecular‐Locking Strategy Enables Volatile Ether Organic Electrolytes to Achieve High‐Energy Lithium Battery 1.00
Hydrogen-Bond-Stabilized Organic Potassium-Ion Full Cell Operating at −40°C 1.00
Ion‐Dipole Interaction Induced Rigid‐Flexible Coupling SEI for Ultrastable Sodium Storage of Microsized Sn Anode 1.00
Organic Ion-Mediated Electrostatic Shielding Facilitates Membrane-Free Electrochemical Hydrogen Production Coupling with LiFePO4 Recycling 1.00
Unveiling the Influence of Formation Voltage on Li-Rich Layered Oxide Cathode 0.82
Modulating Adsorption Intermediate Metastability for Tip‐Directed Zinc Stripping and Suppressed Vanadium Dissolution Toward Long‐Cycling Zinc–Vanadium Batteries 1.00
A Weakly‐Solvating Propylene Carbonate Electrolyte for High‐Voltage and Low‐Temperature Lithium‐Ion Batteries 1.00
Hydrophobic Poly(divinylbenzene) Polymer‐Supported Ruthenium Catalysts for Efficient Hydrogenation of Pyridines in Water 1.00
Well‐Defined Redox‐Active Hyperbranched Polymers for Flow Batteries: Harnessing Self‐Condensing Vinyl Copolymerization by Flow Chemistry 1.00
Multisite Cooperative Regulation of Solvation and Interface via Dynamic Additive Engineering for Highly Reversible Zinc Batteries 1.00
Molecular Design of Asymmetric Difluorinated Ether Electrolytes for Stable Operation of High‐Voltage Lithium Metal Batteries 1.00
Electrochemical Polymerization of 1,2-Dithiolane Derivatives at Room Temperature 1.00
Realizing High Performance Four‐Electron Zinc‐Iodine Batteries with Acidic Eutectic Electrolyte 1.00
Quinuclidinium‐Based Microporous Anion Exchange Membranes for Water Electrolysis 1.00
Unlocking High‐Performance Four‐Electron Zinc‐Iodine Batteries through Halogen Bonding Inversion and Non‐Identical‐Frequency Molecular Vibrations 0.95
Electronic Structure-Engineered Proton Depletion Interfaces on Ternary RuO2 for Ultra-Stable Kilowatt Electrocatalysis 0.65
Continuous Flow Photocatalysis Boosting C─N Coupling for Sustainable High-Efficiency Formamide Synthesis 1.00
Single-Molecule Dual-Anchor Design Enables Extreme-Condition Lithium Metal Batteries Through Solvation Reconstruction and Cathode Polymerization 0.90
Unlocking the Free Radical Evolution for Directed Conversion of Furoic Acid to 2,5-Furandicarboxylic Acid Over Lattice-Distorted MnOx 1.00
Truxenone-Based Covalent Organic Framework/Carbon Nanotube Composite for High-Performance Low-Temperature Sodium-Ion Batteries 1.00
Ni-Bis(dithiolene) Coordination Enhanced Dual-Functional Covalent Organic Frameworks for both Cathodic Zn2+ Storage and Anodic Zinc Deposition Control in Aqueous Zn-Ion Batteries 1.00
The Design of Interfacial Organic‐Riched Phase by Molecular Interlocking for Stable Zn Anodes 1.00
Asymmetric Coordinated Single‐Atom Catalysts Offering Zero‐Order Sulfur Redox Kinetics for High Performance Li–S Batteries 1.00
Crystal Facet-Engineered Anion Regulation Enables Fast-Charging Stability in Lithium Metal Batteries 0.93
Halogen‐Driven Ion Transport Homogenization in 3D Hierarchical MOF for Ultrastable Solid‐State Lithium Metal Batteries 0.85
Simultaneous Modulation of Mesoporosity and Al Siting for Superior Performance Zeolite Catalyst in Ethylene Dehydroaromatization to Aromatics 0.43
Insight into how PETase Functions at the Solid-Liquid Interface and an Activity-Stability Trade-Off 0.79
Restructured Three‐Coordinated Ni─Se Catalytic Sites for Enhanced Cross‐Condensation of Methanol and Ethanol 1.00
Mechanistic Insights into the Dissolution Relay for Deep Progression of Active Sites Toward Efficient and Ultralong‐Life Energy Storage 1.00
Engineering Covalent and Noncovalent Interface Synergy in MXenes for Ultralong‐life and Efficient Energy Storage 1.00
Emphasizing a-parameter Expansion in Lattice Distortions of Disordered Rock Salt Li3V2O5: From Crystallographic Design to Feasible Large-Scale Chemical Lithiation 1.00
Amorphous Silica Induced Loose CeO2 Clusters with Isolated Pt Atoms for Efficient Reverse-Water Gas Shift Reaction 1.00
Unveiling an Innovative Pathway for Enhancing Lithium-ion Conductivity of Li3PW12O40 Electrolyte via Pressure Modulation Strategy 1.00
Efficient Carrier Separation via Ru@TS@C Zeolite: Enabling Photo-Cathodes for High-Efficiency Photo-Assisted Metal−Air Batteries 1.00
Selective Catalysis‐Mediated Interface to Stabilize Antimony Atom‐Cluster Anode for Robust Potassium‐Ion Batteries 0.86
In‐Built Compatible Electrode‐Electrolyte Interphases for Quasi‐Solid‐State Li‐SPAN Batteries 1.00
V-Induced Low-Spin State Mn3+ Suppresses Jahn–Teller Distortion for High-Performance Aqueous Zinc Ion Batteries 1.00
Fluorine Modified Zeolitic Imidazolate Framework Enables Long-Life Zn–I2 Batteries by Suppression of Polyiodide Shuttle 1.00
Preferential Texture of Surface Coating on Zn Anodes for Advanced Aqueous Batteries: Small Change but Big Gain 1.00
Nitrogen‐Induced Hydrogen Bonding Supramolecular Network for Ultra‐Stable Ammonium Ion Storage 1.00
d-p Orbital Hybridization of Ternary Transition Metal Toward High-Performance Proton Storage 1.00
Adjusting Chemical Hardness–Softness Balance of Electrolyte to Enable High‐Voltage Reversible Fluoride Ion Batteries 1.00
Balancing Tetrahedral and Cation Entropies for Long‐lifespan Low‐temperature Zn‐ion Batteries 1.00
Cationic–Zwitterionic Polymer Electrolytes with Enhanced Ionic Conductivity and Lithium‐Ion Selectivity for Solid‐State Batteries 1.00
A Guest Cation Screening Principle for Enabling Customized Cathode/Electrolyte Interface Chemistry and Self‐Enhanced Aqueous Zinc‐Ion Batteries 1.00
Simultaneous Manipulation of Electric Double Layer and Zn (100) Deposition Enabled by Anions for Highly Stable Zn Anodes 1.00
Harnessing Dual Hydrogen Bonding and iLewis/i Acid–Base Interactions for Bio‐Inspired Symmetry‐Breaking Electrolytes in Aqueous Zinc‐Ion Batteries 0.33
Acid‐Alkaline Double Electrolytes for High‐Energy Aqueous Proton Batteries 0.94
Adaptive Hydration Chemistry Enables Fast and Durable Zinc‐Ion Batteries 1.00
Convergent Electrochemical–Chemical Tandem Catalysis Synthesis of Ethylene Oxide from CO2 and Water at Ambient Conditions 0.92
Sustained Release of Underpotential Deposition Initiators for Ah‐Level Zinc Metal Batteries 1.00
Strong Dipole Moments and Increased Charge Transfer in Polymer‐Based Solid Electrolyte Enable Wide‐Temperature Solid‐State Lithium Metal Batteries 1.00
Synergistic Construction of In Situ Self‐Polymerized Interface and Localized pH Buffer Zone for High‐Performance Aqueous Zinc–Iodine Batteries 0.92
Orthogonal Control of Lattice Oxygen Activation and Oxygen Evolution Reaction Suppression via “Molecular Gates” for High‐Efficiency Nitrile Electrosynthesis 1.00
Regulating Dynamic Evolution of Interfacial Electrolyte Configuration via Inert Cation Induced Anion Anchoring to Stabilize Lithium‐Metal Anode 1.00
Synergistic Effects of Electrolyte Additives in a Dual‐Salt System for High‐Performance Four Electron Aqueous Zinc–Iodine Batteries Across a Wide Temperature Range 0.90
Synthesis of an Sp‐Carbon‐Rich Carbonaceous Material Exhibiting Distinctive Anode Performance 1.00
Nuclear Quantum Confinement Enables Robust Deuterium Bonds for Highly Reversible Aluminum Anodes 0.80
Boosting Performance of Quasi‐Solid‐State Zinc Ion Batteries via Zincophilic Solubilization 1.00
Lignin‐Derived Polyanionic Crosslinked Gel Interfacial Layer with Ion‐Sieving and Ion‐Regulating Capabilities for Dendrite‐Free Zinc Anodes 1.00
Design Strategy for Small‐Molecule Organic Cathodes: Regulated Active Groups Enable High Capacity and Voltage in Aqueous and Seawater Aluminum Ion Batteries 0.80
Local Electric Field Microenvironment‐Induced Dynamic Spatial Confinement to Stabilize Isup+/sup Toward High‐Mass‐Loading and Stable Zinc–Iodine Batteries 1.00
A 3.8 V Quaternary Ammonium‐Based Dual‐Ion Battery Enabled by a Conjugated Ladder Polymer 0.88
Optimizing Bromine Complexation and Kinetics: a Bisimidazole Strategy for High‐Performance Zn‐Br Static Batteries 1.00
Self‐Adapting Lattice Respiration Enabled by Crystal Design and id/i‐ip/i Orbital Hybridization Toward Highly Stable Rechargeable Aluminum Batteries 1.00
Breaking the Activity‐Selectivity Trade‐off in Direct Levulinate Hydrodeoxygenation to Pentanoic Biofuels over La‐Modulated Ru‐Zeolite Catalysts 0.90
Site-Blocking Strategy Boosts H2S Tolerance in Platinum-Based Hydrogen Oxidation Catalysts 1.00
Intramolecular Hydrogen‐Bonding Catalyst/Initiator for Precise Synthesis of Polycarbonates and Copolymers with Unprecedented Activity and Molecular Weights 1.00
Fluorine‐Engineered Membranes Break the Conductivity‐Selectivity Trade‐Off in Aqueous Organic Redox Flow Batteries 1.00
Self‐Assembled Homogeneous Heterobimetallic‐Oxide Interfaces Enable Synergistic Hydrogen Evolution Passivation for Durable Acidic Zn–Mn Batteries 1.00
Engineering Anion‐Diluent Matrix for Ion‐Decoupled Localized High‐Concentration Electrolytes toward Highly Stable Aqueous Zinc Ion Batteries 1.00
Thermodynamic Feedback Mechanisms for Mitigating Polarization in Lithium‐Ion Batteries 1.00
Dienoic‐Acid Coupling Effect Induced Hierarchical Interface for High‐Performance Zinc Metal Batteries 1.00
Balancing Solvation Ability of Polymer and Solvent in Gel Polymer Electrolytes for Efficient Lithium Metal Batteries 0.06
Covalent Organic Framework Quantum Dots for Near‐Frictionless Ion Transport Battery Electrolyte 1.00
Electric Field‐Insensitive Solvation Chemistry Stabilizes High‐Voltage Lithium Metal Batteries 0.89
Lewis–Brønsted Dual Acid Sites in WOsub3‐/subisubx/sub/i Catalysts Facilitate Direct Photocatalytic Hydrodeoxygenation of Hydroxy Groups in Alcohols 1.00
Kirkendall Effect-Driven Interface Engineering Facilitates Water Dissociation for Dual-Site H2O2 Electrosynthesis Simultaneously at the Anode and Cathode 1.00
Photoelectric/Photothermal Synergy Activation in Floating Aerogel Cathode Breaks Neutral Triphase Reaction Barriers for High‐Efficiency Full‐Spectrum‐Responsive Seawater Batteries 1.00
Design and Preparation of Self‐Adaptive and Robust Solid‐State Elastomeric Electrolyte for Lithium Metal Battery Inspired by Rubber Tire 1.00
A Donor–Acceptor‐Donor‐type Organic Molecule as an Effective Electrode to Form Rapid Diffusion Pathway for High‐Performance Sodium‐Ion Batteries 1.00
Wide‐Temperature, High‐Voltage, Flame‐Retardant Electrolyte for 4.8 V Li||NCM94 Batteries 1.00
Active Edge Sites Engineering on Amorphous Co–Mn Spinel‐Based Oxides for Efficient Peroxymonosulfate Activation 1.00
Bone‐Inspired Sustainable Hydrogel Electrolytes for Zn Metal Batteries 0.77
Anion‐Dominated Calendar Aging in Aqueous Zinc Metal Batteries 1.00
Titanium–Polyoxometalate Crosslinked Metallo–Supramolecular Polymer as Artificial Interfacial Layer for Highly Persistent and Low–Temperature Tolerant Lithium Metal Batteries 1.00
Transition Metal Atom–Cluster Synergistic Modification with Tuned d‐band Center Imparts Longevous Potassium Metal Anodes 0.91
Origin of Anion‐Rich Solvation Structures in Siloxane Electrolytes 1.00
Butterfly‐Shaped Folding Synthons for Designing Superselective and Ultrapermeable Artificial Water Channels 1.00
Taiji‐Inspired Synergistic Attraction‐Repulsion Electrostatic Interactions Enable Dual‐Electrode Stabilization for Durable High‐Areal‐Capacity Aqueous Zinc‐Bromine Batteries 1.00
A Bidirectional Ion Kinetic Regulator Suppressing Lithium Dendrites in Advanced Lithium‐Sulfur Batteries 1.00
Visible‐Light‐Driven Selective Mineralization of Organohalides on Spatially Close Au Single‐Atom and Nanocluster Neighbors Over Poly(Heptazine Imides) 0.81
Critical Role of Potential‐Driven Charge Effects in Hard Carbon Anodes for Sodium Storage 0.78
Lithium‐Bond‐Based Deep Eutectic Electrolyte Solutions for High‐Temperature Lithium Metal Batteries 0.50
Evolution of CoxNiy Alloy Electronic Structure Buffered by Carbon Nanolayer to Tune Selective Generation of Reactive Oxygen Species 1.00
Unraveling the Potential‐Regulated Selectivity of the Cu‐Based Catalyst in 5‐Hydroxymethylfurfural Electro‐Oxidation 1.00
Manipulating Competitive Li+ Coordination of F-Rich Polymer and High Flash Point Glyme Electrolyte Enabling High Rate and Intrinsically Safe Quasi-Solid-State Li Metal Batteries 1.00
Toward Stable Zinc Anode: An AI‐Assisted High‐Throughput Screening of Electrolyte Additives for Aqueous Zinc‐Ion Battery 1.00
Modulating Ion‐Dipole and Dipole–Dipole Interactions for Stable Wide‐Temperature‐Range Lithium–Sulfur Batteries Enabled by Quantum‐Dot Catalysts 0.94
Electrostatic Potential-Dominated Weak Solvation Chemistry for Synergistic Optimization of V2O5 Cathode and Zn Anode 1.00
Co‐sustained Release Strategy of Nonflammable Gel Polymer Electrolytes Enables Long‐Life Sodium Metal Batteries 1.00
Biomimetic Gourd‐Vine Supramolecular Engineering for High‐Performance Organic Cathode Through Dual‐Mode of Anion Coordination and Conjugated Redox Activation 1.00
Unveiling Roles of Nonradical Electron‐Donation Pathway in Peroxymonosulfate Activation for Boosted Interfacial Radical Generation 1.00
Quaternized‐PAF Architecture Mediated Proton Channels to Enhance Ultra‐Robust Operation for 200 °C Proton Exchange Membrane Fuel Cells 1.00
Promoting the Rate Performances of Weakly Solvating Electrolyte‐Based Lithium‒Sulfur Batteries 1.00
Compact Ion‐Pair Aggregates Dominated Electrolytes Enable High‐Performance Low‐Temperature Lithium‐Ion Batteries 1.00
A Natural Oxygen‐Harvesting Electrode Enables Aeration‐Free Electrochemical Advanced Oxidation for In Situ Water Remediation 1.00
Anion-Regulated Deposition–Dissolution Chemistry in Acidic Aqueous Indium─MnO2 Batteries 1.00
Tailoring a Fast Ion‐Conducting Substrate with Competitive Adsorption for Dendrite‐Free Lithium/Potassium Metal Batteries 0.94
Regulating Solvating Sites for Stable High‐Voltage Lithium Metal Batteries 1.00
Branching‐Induced Intermolecular Repulsion Effects Drive Stable and Sustainable Flow Batteries on Condensed Nitroxyl Radicals 1.00
“Pseudo‐Charge‐Transfer Complex” Electrolyte Enables 490 Wh Kgsup−1/sup Lithium Metal Battery Operated From −40 to 80 °C 1.00
Framework Integration for Adaptive Interfaces in Flexible Solid‐State Lithium–Oxygen Batteries 1.00
Topologically Entangled Network Polymer Electrolyte with Ionophilic–Protonation Dual Side Chains for High‐Voltage Lithium‐Metal Batteries 1.00
Three‐Motif Molecular Junction Covalent Organic Frameworks for Symmetric All‐Organic Lithium‐Ion Battery 1.00
Covalent Organic Frameworks Coupled with Redox Center and Adsorption Site for Efficient Shuttle‐Free Zn‐Iodine Batteries 1.00
Engineering Robust Hydrophilic–Hydrophobic Interface via π‐electron Delocalization for Ultralong‐Lived Zinc–Ion Batteries 1.00
Ether‐Oxygen Groups Modified Carboxylic Ester Enabling High‐Voltage Lithium Metal Batteries 0.83
In‐Situ Dynamic Compensation Strategy Enables Jahn‐Teller Effect Suppression in Zn‐Doped Dual‐Active‐Site Copper Hexacyanoferrate Cathodes for High‐Energy and Ultra‐Stable Ammonium‐Ion Storage 1.00
A Resonance Hybrid Design for Stable Aqueous Organic Redox Flow Batteries 1.00
Photogenerated Holes Induced Deep Sodium Storage of TiO2/CdSe/NFPP Cathode for High-Efficiency Photorechargeable Sodium Batteries 0.92
Lewis‐Base Electrolyte Additive Mediates Interfacial Chemistry for Stable Lithium Metal Batteries 1.00
Ultrahigh‐Voltage Lithium Metal Batteries Enabled by Single‐Ion and Weakly‐Solvating Nanometric Aggregates 1.00
Unlocking Durable and Sustainable Zinc–Iodine Batteries via Molecularly Engineered Polyiodide Reservoirs 0.46
Supramolecularly Confined Catalysis in Polyphthalocyanine‐Crown‐Ether Frameworks Boosts Sulfur Redox Kinetics 1.00
Uni‐Electrolyte: An Artificial Intelligence Platform for Designing Electrolyte Molecules for Rechargeable Batteries 1.00
Ultraselective Permeable Polyamide Membranes Prepared via Interfacial Polymerization of Alkane and Deep Eutectic Solvent 0.88
Self‐Activated Heterogeneous Fenton Process for Accelerated Degradation of Aromatic Pollutants over Copper Oxide Catalysts 1.00
Multivariate Distribution Structured Anisotropic Inorganic Polymer Composite Electrolyte for Long‐Cycle and High‐Energy All‐Solid‐State Lithium Metal Batteries 1.00
Deciphering Coulombic Efficiency of Lithium Metal Anodes by Screening Electrolyte Properties 1.00
Layered‐Spinel Heterogeneous Structure and Oxygen Vacancies Enable Superior Electrochemical Performance for Li‐Rich Cathodes 1.00
Molecularly Woven Artificial Solid Electrolyte Interphase 1.00
Unlocking Precision in Biomass Conversion Through Functional Ligand Engineering of Lewis Acidic MOFs 1.00
Design Considerations of Ionic Conductive Elastomeric Electrolyte for Solid‐State Zinc Metal Batteries with High Safety and Long Life 1.00
Harnessing Solvation Chemistry of Pentavalent Vanadium for Wide‐Temperature Range Vanadium Flow Batteries 1.00
Constructing Matching Interfaces by Amorphous Engineering for Enhanced Lithium Ion Transport in Quasi‐Solid‐State Lithium–Iodine Batteries 1.00
High-Performance Al–S Batteries by Spin Polarization Modulation via Catalytic Ni-MoS2 Nanosheets 0.59
A Dynamic Self‐Healing Protective Layer Enabling Stable Zinc Ion Batteries through Strong Zn‐S Affinity and Intramolecular Hydrogen Bonding 1.00
Electronic State Modulation of a Single-Cu Site on a Bimetallically Doped Titanium-Oxo Cluster to Enhance CO2 Storage 1.00
Stable Diradical‐Derived Conjugated Radical Polymers 1.00
Heteroanionic Halogenated TiBTx MBene Protective Layer With Dual-Functional Zincophilic and Hydrophobic Characteristics for Dendrite-Free Zinc Anode 0.67
Molecular Engineering of Weakly Solvating Dinitrile Electrolytes for Long‐Lasting Room‐Temperature Lithium Metal Batteries 1.00
Molecular Design of Polymeric Metal–Organic Nanocapsule Networks for Solid‐State Lithium Batteries 1.00
Fluorinated Covalent Organic Framework Membranes with Robust Wetting Resistance for Durable Membrane Distillation 1.00
Co‐Regulation of Interface and Bulk for Enhanced Localized High‐Concentration Electrolytes in Stable and Practical Zinc Metal Batteries 1.00
An Organic‐Inorganic‐Integrated Solid Electrolyte Interphase with High‐Resilience and Anti‐Corrosion for Sustainable Zinc Metal Anode 1.00
Wide Temperature 500 Wh kg−1 Lithium Metal Pouch Cells 0.92
Engineering Charge Polarized Au Sites for Low‐Temperature Acetylene Hydrochlorination 0.56
Surface Work Function‐Induced High‐Entropy Solid Electrolyte Interphase Formation for Highly Stable Potassium Metal Anodes 1.00
A Solid Polymer Electrolyte with Inorganic‐Enriched Cathode Electrolyte Interphases Enabling 5.1 V Solid‐State Lithium‐Ion Batteries 1.00
Dynamic Migration‐Pulling Polymer Electrolyte Design Strategy for Low‐Temperature Lithium–Sulfur Batteries 1.00
Constructing Ionic Transport Network via Supramolecular Composite Binder in Cathode for All‐Solid‐State Lithium Batteries 1.00
Hydrogen‐Bonded Organic Framework with Desolventization and Lithium‐Rich Sites for High‐Performance Lithium Metal Anodes 1.00
Unveiling Zinc Stripping and Molecular Engineering for High‐Performance Zinc Anode 0.89
Turing‐Structured Covalent Organic Framework Membranes for Fast and Precise Peptide Separations 1.00
Regulating Ion Transport Through Direct Coordination in Composite Gel Polymer Electrolytes Toward High‐Voltage and High‐Loading Quasi‐Solid‐State Lithium Metal Batteries 1.00
Modular Access to Aliphatic Polycarbonates with Tunable Properties and Dual Closed-Loop Recyclability by Polycondensation–Depolymerization–Repolymerization Strategy 1.00
Localized High‐Concentration Electrolytes With Semi‐Solvated Hexafluoroisopropyl Methyl Ether Diluent for Wide‐Temperature‐Range Lithium Metal Batteries 1.00
Lattice Water Deprotonation Enables Potassium‐Ion Chemistries 0.92
Cyclic Trinuclear Units Based Covalent Metal‐Organic Frameworks for Gold Recovery 1.00
Interface Engineered Electrolyte Design Strategy for Ultralong‐Cycle Solid‐State Lithium Batteries Over Wide Temperature Range 1.00
An Atmosphere‐Responsive Protective Strategy Based on Deciphering the Anode Degradation Mechanism in Li–COsub2/sub Batteries 1.00
Plasmonic Ion Diode Membrane (PIDM) for Enhanced Nanofluidic Ion Transport 1.00
Bimetallic Design Based on the Nucleation Rate of Prussian Blue Analogues for Enhanced Aqueous Zinc Ion Batteries with Glycerol–Water Hybrid Electrolytes 1.00
Hydrogen Spillover‐Induced Brønsted Acidity Enables Controllable Hydrocracking of Polyolefin Waste to Liquid Fuels 1.00
Enhancing Waste Plastic Hydrogenolysis on Ru/CeO2 Through Concurrent Incorporation of Fe Single Atoms and FeOx Nanoclusters 1.00
Ultralong-Cycling Lithium Storage of SrGe2O4S Anode Enabled by In Situ Formed Oxysulfide Matrix 1.00
High‐Capacity and Long‐Life Cathode Constructed Solely by Carbon Dots for Aqueous Zinc‐Ion Batteries 1.00
Tunable Oxygen Vacancy Clusters Enhanced Catalytic Activity of CeO2 Nanorods on CO2 Cycloaddition 1.00
Realizing Persistent Lithium Protection and Revival with Dissolution‐Equilibrium‐Driven Sustainable Additives Reservoir 1.00
An Integrated Tandem‐Structured Separator Enables Dual‐Enhanced Stable Interfaces for Long‐Cycle‐Life and High‐Areal‐Capacity Aqueous Zinc–Iodine Batteries 1.00
Aluminum Distribution in Ferrierite Zeolites Influences the Performance of Methane Oxidation 0.17
Phosphorylation Regulation Promotes Bidirectional Dynamic Adaptive Interface for Achieving Stable Zn–I2 Batteries 1.00
Ordered Co‐Assembly of Soft‐in‐Hard Hetero‐Structured Pulse Guidance Ion‐Accelerator for Dendrite‐Free Aqueous Zinc‐Ion Battery Anodes 1.00
A Fluorine‐Free Organic/Inorganic Interphase for Highly Reversible Aqueous Zinc Batteries 1.00
Self‐Powered Electrocatalytic Aldehyde Reforming Fuel Cell for Sustainable Hsub2/sub Generation with ∼200% Faradaic Efficiency 1.00
To Make a Painstaking Investigation: Revealing the Electrochemical Reactions in Aqueous Zn─Mn Batteries 1.00
Synergistic Regulation of Multi‐Interface Chemistry by Functional Carbon Dots for High‐Performance Composite Solid Electrolytes 1.00
Porous Aromatic Frameworks Filler with Anion‐Constrained Centers in Composite Polymer Electrolyte for Lithium‐Ion Batteries 1.00
High Performance Capacitive Deionization Cathode of Nickel Hexacyanoferrate Doped with Trace Molybdenum: Breaking the Capacity‐Stability Trade‐Off 1.00
A Sustainable and Scalable Approach for In Situ Induction of Gradient Nucleation Sites in Biomass‐Derived Interface Layers for Ultra‐Stable Aqueous Zinc Metal Batteries 1.00
“Rigid Exterior, Soft Interior” Design Enables High-Voltage Polyether Electrolytes for Quasi-Solid-State Batteries 1.00
Conformational Engineering of Solvent Molecules for High‐Voltage and Fast‐Charging Lithium Metal Batteries 0.90
Dictating Znsup2+/sup Transport Kinetics via Versatile Ionic Covalent Organic Framework for Robust Zn Metal Anodes 0.92
Enhancing Ion Transport at Primary Interparticle Boundaries of Polycrystalline Lithium‐Rich Oxide in All‐Solid‐State Batteries 1.00
Confinement of Polyiodides by Dual-Functional Tetrazine Cathodes in Zn–I2 Batteries 1.00
Multi‐ion Coordinated Water Network in Dilute Acid Electrolytes for Ultralow‐Temperature (≤−80 °C) Proton Energy Storage 1.00
Achieving a Highly Reversible Four-Electron Redox of S/Cu2S for Aqueous Zn/S─Cu Battery 1.00
Water‐in‐Acid Strategy for Corrosion‐Free Proton Storage: Phosphoric Acid Electrolyte Engineering Toward Sustainable Aqueous Batteries 0.77
High Partial Molar Volume Polymer Electrolyte for Upgraded Lithium Metal Batteries 1.00
Regulating Interfacial Molecular Configuration to Drive Facet‐Selective Zn Metal Deposition 0.27
Origin of Lithium Dendrite Formation in Sulfide‐Based Electrolyte 0.73
Low‐Redox‐Barrier Two‐Electron p‐Type Phenoselenazine Cathode for Superior Zinc‐Organic Batteries 1.00
Dynamic Modulation of Keto‐Enol Tautomerism in Electrolytes for Aqueous Zinc Batteries 1.00
Accelerated Oxide‐Zeolite Catalyst Design for Syngas Conversion by Reaction Phase Diagram Analysis and Machine Learning 1.00
Suppressing Dendrite Growth by Dolosse‐Structured ZIF‐67 Polycrystalline Membranes Through Eliminating Interfacial Electrolyte Turbulence on Zinc Anode 1.00
Unlocking Ultrafast‐Kinetics Asymmetric Heterojunction with Multi‐Anionic Redox Chemistry Enables High Energy/Power Density and Low‐Temperature Zinc‐Ion Batteries 1.00
Single‐Specie Selectivity via Subnanometer Hierarchical Porous Channel Metal‐Organic Gels Toward Ultra‐stable Anodes for Zn Metal Batteries 1.00
Modulating Diffusion Kinetics and Interfacial Stability via In‐Situ Constructed Self‐Healing Interfaces for Highly Reversible Zinc Metal Anodes 1.00
Data–Knowledge‐Dual‐Driven Electrolyte Design for Fast‐Charging Lithium Ion Batteries 1.00
High‐Throughput DFT‐Assisted Design of Electrode for Efficient High‐Temperature Electrochemical Dehydrogenation 1.00
Towards High-Performance Aqueous Zn-Organic Batteries via Using I−-Based Active Electrolyte 1.00
Entropy‐Driven Competitive Adsorption Sites Tailoring Unlocks Efficient Hybrid Conversion Zn–Air Batteries 0.63
Chain–Chain Synergistic Hydrogel Electrolytes Regulate Zinc Ions Desolvation for Stabilized Anodes and High Operating Voltage in Flexible Zinc Ions Hybrid Capacitors 1.00
Interfacial H‐bond Network/Concentration Fields/Electric Fields Regulation Achieved by D‐Valine Anions Realizes the Highly Efficient Aqueous Zinc Ion Batteries 0.72
Self‐Compartmented Electrolyte Design for Stable Cycling of Lithium Metal Batteries under Extreme Conditions 1.00
Boosting Ultra‐Wide Temperature Sodium‐Bromine Batteries via Chlorine‐Bromine Activation 1.00
Epitaxial Electrodeposition of Lithium Metal in Cubic Wulff Structures 1.00
Bypassing In Situ CO Poisoning in Furfural Conversion: Electron-Deficient Pd Single-Atom Alloys Enable One-Step Selective Synthesis of Tetrahydrofuran 1.00
Highly Active Pt‐Fe Catalysts Towards CO Preferential Oxidation with an Ultra‐Wide Temperature Window 1.00
Highly Efficient Singlet Oxygen Production in a Cascade Photoelectrocatalytic System for Water Decontamination 0.91
Interfacial Mesochannels as Cation Pump for Enhanced Osmotic Energy Harvesting 1.00
Cold‐Optimized Zinc‐Ion Batteries: Enhanced Stability at −5 °C 1.00
Synergy Between Weak Solvent and Solid Electrolyte Interphase Enables High‐Rate and Temperature‐Resilient Potassium Ion Batteries 0.86
Antisolvent‐Regulated Anionic Coordination Enabling Stable Li Metal Anode in Urea‐Based Electrolyte 1.00
Interweaved Nanofiber Anode Coating Based on Covalent Organic Frameworks for High‐Performance Lithium‐Metal Batteries 1.00
Antifreeze Protein Mimics Realizing Stable Low‐Temperature‐Resistant Aqueous Zn‐Ion Batteries with High Water Content 1.00
Enhancing Heterointerface Coupling for Durable Industrial‐Level Proton Exchange Membrane Water Electrolysis 1.00
Electric Field‐Induced Fast Li‐Ion Channels in Ionic Plastic Crystal Electrolytes for All‐Solid‐State Batteries 1.00
Unveiling the Influence of Dehydrofluorination of Poly(vinylidene fluoride) Binder on the Failure of Graphite Anode in Potassium‐ion Batteries 1.00
Removing α‐H in Carboxylate‐Based Electrolytes for Stable Lithium Metal Batteries 0.97
Photo‐Self‐Fenton Reaction Mediated by Silver Single Atom and Cluster Photocatalysts for Highly Selective Generation of Singlet Oxygen Toward Efficient Organic Wastewater Treatment 1.00
Molecularly Engineered Circular Additive with Multisite Desolvation for High‐Performance Zinc Ion Battery 1.00
Electron‐Deficient Cobalt Centers Realized by Rational p─π Conjugation Regulation for High‐Performance Li─S Batteries 1.00
Switching Products Selectivity in Electrocatalytic C(sp3)─H Bonds Activation and CO2 Carboxylation via Cu─S Bond Crystal Engineering 1.00
Propylene‐Bridged Associative Bis(bipyridinium) Electrolytes for Long‐Lifetime Aqueous Organic Redox Flow Batteries 1.00
Unraveling Electrode Surface Chemistry in Determining Interphase Stability and Deposition Homogeneity for Anode‐Free Potassium Metal Batteries 1.00
Cation-in-Mesopore Complex for 20 Ah-Level Aqueous Battery 1.00
Boron‐Fluoride Dual‐atom Synergistic Regulated Interface Coating Enables Stable Zn‐Metal Anodes 1.00
Leveraging Polaron Effect for Solar‐Driven Efficient Peroxymonosulfate Activation in Water Purification 1.00
Spatially Coupling Electronic–Ionic Transport in Organic Mixed Conductors as Cathodes for Efficient Zn–V Batteries 1.00
Low Strain Mediated Zn (0002) Plane Epitaxial Plating for Highly Stable Zinc Metal Batteries 1.00
High‐Entropy Deep Eutectic Solvent Achieves Ultra‐Low Polarization Zinc Anode Chemistry 0.65
A Crystalline Polymer Cathode for Sodium‐Organic Batteries 1.00
Formulating Electrophilic Electrolyte for In Situ Stabilization of 4.8 V Li-Rich Batteries with 100% Initial Coulombic Efficiency 1.00
Biomimetic Localized Gel Electrolyte for Practical Zinc Anode 0.62
Suppressing Spontaneous Acidic Corrosion and Hydrogen Evolution for Stable Zn//MnO2 Batteries 1.00
Highly Efficient and Durable Anode Catalyst Layer Constructed with Deformable Hollow IrOx Nanospheres in Low-Iridium PEM Water Electrolyzer 0.67
A Titanium Silicalite‐1 (TS‐1) Catalyst with Abundant Active Ti‐VI Species for Efficient Conversion of Ethylene to Glycol 0.90
Hydrogen Bond Network Assisted Ultrafast Ion Transport of Anion Exchange Membrane Grafting with Covalent Organic Frameworks for Hydrogen Conversion 1.00
Electric‐Dipole Coupling Ion‐Dipole Engineering Induced Rational Solvation‐Desolvation Behavior for Constructing Stable Solid‐State Lithium Metal Batteries 1.00
Charge Tuning and Anchor Effect Achieving Stable High‐Voltage Layered Metal Oxides for Sodium‐Ion Battery 1.00
Selective Masking of Active Sites in Zinc Metal via Galvanic Replacement Reaction for Highly Reversible Ah-Level Zinc-I2 Batteries 1.00
Engineering Aqueous Electrolytes with Vicinal S‐based Organic Additives for Highly Reversible Zinc‐Ion Batteries 0.85
Donor‐Π‐Acceptor Self‐Adaptive Conjugated Perylene Derivative with Low Solubility, High Capacity, and Swift Ion Transport Kinetics for High Performance Organic Cathode 1.00
Quasi‐Industrial Preparation of SWCNTs‐Confined High‐Entropy Oxides as Self‐Supported Electrodes for Continuous Electrosynthesis 1.00
Electrochemical Responsive Alginate Chains Rendered Sol‐to‐Gel Gradient Electrolyte towards Practical Ah‐level Zinc Metal Pouch Cell 1.00
Sub‐Minute Fabrication of Metal Organic Framework Membranes via Additive‐Accelerated Electrodeposition 1.00
Synergistic Catalysts for Lithium‐Sulfur Batteries: Ni Single Atom and MoC Nanoclusters Composites 0.92
Iron Single‐Atom Based Double‐Reaction‐Center Catalysis Triggers Internal‐Driven and External‐Driven Pathways for Green Fenton‐Like Chemistry 1.00
Unveil the Failure of Alkali Ion‐Sulfur Aqueous Batteries: Resolving Water Migration by Coordination Regulation 1.00
Compensating K Ions Through an Organic Salt in Electrolytes for Practical K‐Ion Batteries 1.00
Developing the Tandem Structure to Regulate Interfacial Chemistry and Promote Ion Transport Kinetics Toward High‐Voltage Lithium Metal Batteries 1.00
A General and Mild Two-Step Strategy Using Bioderived Diols and CO2 for Chemically Recyclable Polycarbonates and Closed-Loop CO2 Fixation 0.75
Engineered Polymeric Microspheres with Synergistic Hydrogen‐Bonding Nanotraps and Multisite Adsorption for Ultrafast Herbicide Decontamination 0.90
A Compact‐Solvation Electrolyte Under Low Concentration for High‐Energy Density and Stable Potassium‐Ion Batteries 1.00
183 164.65
A coupled material-energy‑carbon flow method for quantifying changes in energy consumption and CO2 emissions of iron and steel sites 1.00
The design, modeling, and performance verification of an integrated PEMFC-powered engine for UAVs 1.00
Adaptive confidence-calibrated semi-supervised ensemble for early-cycle battery lifetime prediction 1.00
A 3D energy topology network modeling approach for cross-flow SOFCs: comprehensive evaluation of multi-physics field coupling and synergistic responses 1.00
Improving the electro-thermal performance of battery module using a pulse liquid immersion cooling strategy 1.00
Uncertainty-oriented collaborative learning for on-orbit state-of-health estimation of satellite lithium-ion batteries considering multi-operating conditions 1.00
A novel mechanism for suppressing cycling degradation of lithium-ion batteries under medium-to-high C-rates 1.00
Enabling grid-interactive data center-desalination coordination through thermo-electric coupling-based waste heat utilization 0.50
Lightweight and efficient tubular SOFC design for UAV applications: multi-physics modeling and performance optimization 1.00
A critical review of remaining useful life prediction for water Electrolyzers: From degradation mechanisms to prognostic models 0.90
Investigation of lithium plating mechanism based on N/P ratio controlled lithium-ion batteries 1.00
Optimal design of megawatt-scale proton exchange membrane water electrolysis module by hierarchical multi-scale modeling 1.00
Electrode microstructure-driven multi-scale feature fusion framework based on microscopic imaging technique for health estimate of lithium-ion batteries 0.81
Internal temperature sensing for lithium-ion battery under ultrahigh-rate discharge conditions using physics-informed neural network 1.00
A cascaded gas-liquid separator for multi-stack series configuration to improve the current efficiency of an alkaline water electrolysis system 1.00
Temperature-dependent electrochemical process decoupling in PEM water electrolysis: DRT deconvolution and Arrhenius-based modeling 0.83
Advanced electrochemical impedance spectroscopy for high-performance solid oxide fuel cells: A critical review 0.36
Innovations and prospects on functional membrane design for advanced redox flow batteries 1.00
Optimization of electrolyte and cathode thickness for solid oxide electrolysis cells considering residual stresses and thermal–electrical–chemical–mechanical coupling-induced stresses 1.00
Temperature-dependent cathode starvation effects on cold start behavior of PEMFC stacks: An experimental investigation 1.00
Explainable machine learning unveils a critical trade-off in SOFCs: The role of cathode-to-anode reaction site ratio 1.00
Multi-objective optimization and techno-economic assessment of solar-assisted medium-deep borehole seasonal thermal energy storage systems 1.00
Applications of graphene in energy storage devices: From fundamental research to engineering practice 1.00
State of power prediction considering cell inconsistency for a series-parallel battery pack based on adaptive SRUKF and double-neural network 1.00
Diagnosing inconsistencies in battery energy storage systems: A framework integrating electrical, thermal, and aging perspectives 0.79
Multi-stress accelerated aging for cycle life evaluation of high-capacity, long-life Lithium Iron phosphate batteries 0.80
Control-oriented modeling and dynamic energy balance control strategy of steam generation system in coal-fired power plants 1.00
Progress and challenges in zinc-bromine batteries (ZBBs): A path towards safety and mitigation of high-performance systems 0.42
Transformer-based model predictive control with anode potential awareness for online fast charging optimization of lithium-ion batteries 0.67
Recent progress in MXene-based electrode materials for aluminum-ion battery: A comprehensive review 0.38
Current imbalance analysis and magnetic-based consistency evaluation of Lithium-ion parallel-connected battery modules 1.00
Analyzing gas crossover risk of proton exchange membrane water electrolyzer through a perspective of disease prevention and treatment 1.00
SOH estimation framework for batteriesconsidering label normalization and feature stability under real-world data 1.00
Thermal monitoring modeling of solid-state batteries: Decoding temperature inhomogeneity via machine learning of interfacial heat generation 1.00
Regenerating liquid desiccants with a thermo-responsive solution for energy-efficient indoor humidity control 1.00
Thermal analysis and performance prediction on ultrasonic-assisted phase change thermal management device 1.00
A novel hybrid model for state of health prediction in lithium batteries based on non-stationary transformers optimized by tree-structured Parzen estimator considering health factors 1.00
Non-destructive and adaptive negative electrode impedance estimation of lithium-ion batteries using ensemble learning 1.00
Consistency sorting of retired lithium-ion batteries: From the perspective of maximizing remaining useful discharge 1.00
Utilizing steel slag in sorption-enhanced biomass gasification: A pathway to syngas production with integrated CO2 capture 1.00
Model-based optimization of energy efficiency in alkaline water electrolysis under current fluctuations 0.90
Battery health prediction under data scarcity: A cross-domain physics-informed 5-shot framework with GRU-Transformer 1.00
Entropy engineering strategies in nickel-based layered cathode materials: Advances in structural stabilization and electrochemical performance 1.00
Recent growth and potential applications of metallic phase change materials - A review 0.67
Multiaxial failure characterization and short-circuit prediction of large-format prismatic lithium-ion batteries 1.00
Recent progress on multi-scale calculation of perovskite-based proton-conducting electrolytes for proton ceramic fuel cells 1.00
Real-time knowledge- and data-driven reliability analysis for lithium-ion battery energy storage system by Bayesian fault propagation network 1.00
Unlocking minute-level battery incremental capacity analysis construction using deep learning and multi-sequence alignment 1.00
The three-phase transport polarization and structural design status of PEM electrolyzer electrodes 1.00
Cost strategy-integrated geometry selection of phase change material macro-capsule for latent thermal energy storage 1.00
An additive attention-enhanced BiGRU model optimized by beluga whale algorithm for SOEC degradation predicting 1.00
Designing principles of deep eutectic solvents for sustainable recycling of spent lithium-ion batteries 1.00
Lithium-ion battery end of life prediction based on the decelerating aging point 1.00
Phase change materials for flexible refrigerated warehouses: a multi-level review of material properties, system integration, and control strategies 0.57
Model predictive control incorporating data correction for LHTES power controlling: Deployment and case study in data center 1.00
Evacuated collector tube-based solar energy conversion system: Device structure, practical application, and sustainability assessment 1.00
Real-time lithium plating onset detection for lithium-ion batteries via dynamic impedance spectra analysis 0.20
Energy-carbon comprehensive efficiency evaluation of a hydrogen metallurgy system with low-temperature waste heat recovery 1.00
Toward efficient, low-carbon, and Cost-effective hydrogen production shifting from fossil fuel-based to renewable water electrolysis: A perspective and outlook 1.00
Machine learning to predict electrochemical performance of biomass carbon electrodes in lithium/sodium ion batteries 0.46
Mechanism insights and system-level operation analysis of cathode recirculation for durability enhancement in automotive PEMFC 1.00
Novel mesh-based porous transport layer structures for low-cost, high-performance and durable proton exchange membrane water electrolyzers 1.00
Performance comparison of semi-solid-state batteries with liquid electrolyte batteries: a perspective from vehicle operation 1.00
A thermo-electrical dual control strategy for SOEC system based on a neural network feedforward algorithm 1.00
Internal short circuit diagnosis of lithium-ion battery packs considering incomplete charging under cell inconsistencies 0.86
Development and experimental validation of a PCT hysteresis model for level-of-hydrogen estimation in metal hydride hydrogen storage tanks 1.00
Exploring new strategies for improved aluminium-ion batteries through dual-anion modeling 1.00
Deep learning model for remaining useful life prediction with reduced labeling data dependency 1.00
Identifying thermal effects in an innovative thermally-electrochemically co-driven electrochemically mediated CO2 capture system 1.00
Transfer learning with composite kernel sparse Gaussian process-aided model for probabilistic state of health estimation of lithium-ion batteries against multi-source coupled harsh scenarios 1.00
Robust state-of-charge estimation for LiFePO₄ Lithium-ion batteries with pronounced voltage plateau regions 0.80
Immersion cooling enabled thermal runaway prevention in overcharged batteries: Mechanisms and metrics 1.00
Thermal-overdischarge coupling induced aging mechanisms in LiFePO4 batteries: insights from multi-scale electrochemical and material diagnostics 1.00
Understanding advanced membranes for clean energy: COFs and GO approaches in osmotic power generation 0.36
A comprehensive mathematical model for chemical membrane degradation of proton exchange membrane fuel cell with considering precipitated Pt formation 1.00
A comprehensive review on 3D interfacial solar evaporation for sustainable desalination and integrated energy management: structural optimization strategies, advanced materials, and emerging applications 1.00
Insight into mass and charge transports in alkaline direct ammonia fuel cell with anti-ammonia poisoning Fe-N-C cathode 1.00
Robust capacity estimation with uncertainty quantification for li-ion batteries under temporal data masking challenges: A progressive learning approach 1.00
A comprehensive review of lithium-ion battery modelling research and prospects: in-depth analysis of current research and future directions 1.00
In-situ diagnosis of state-of-health inconsistency in membrane electrode assembly components within proton exchange membrane electrolyser stacks with high catalytic compatibility 1.00
Active balance of a solid oxide electrolysis cell stack tower: Circuit design and control strategy 1.00
Metal hydride storage tanks real-time state of charge estimation based on nonlinear observer with a non-observable subsystem 0.25
A control-oriented electro-thermal-mechanical modeling method for lithium-ion batteries considering aging effects 1.00
A concurrent estimation framework for multiple aging parameters of lithium-ion batteries for eVTOL applications 1.00
A comprehensive review of flow channel designs and optimizations for water electrolysis technology 1.00
From waste to wings: Converting food waste into sustainable aviation fuel for climate mitigation 0.25
Experimental study on expansion force characteristics of LiFePO4 battery under overcharge cycles 1.00
Study on the impact of driving styles on EV battery pack SOC inconsistency based on real urban driving data 0.67
Closed-loop synergistic strategy for low-carbon calcium carbide production: Integrating biochar-gas co-supply, multi-stage waste heat valorization, and solid waste calcium-looping 1.00
A physics-enhanced hybrid kolmogorov–arnold network with dynamic coupling for interpretable battery state-of-charge estimation 1.00
Spatial comprehensive comparative analysis of updraft and downdraft fixed bed gasification reactors by computational fluid dynamics approach with industrial data validation 0.60
Multiscale modeling and optimization of proton exchange membrane electrolysis cells: a review 1.00
A high-fidelity online monitoring algorithm for multiple physical fields in battery pack 0.63
A data-efficient method for lithium-ion battery state-of-health estimation based on real-time frequent itemset image encoding 1.00
Physics-informed neural network for co-estimation of state of health, remaining useful life, and short-term degradation path in Lithium-ion batteries 1.00
Low‑carbon coordinated operation of data centers and district heating network with heating recovery 0.40
State-of-health estimation for EV battery packs via incremental capacity curves and S-transform 1.00
A comprehensive review on MXenes for various applications 0.31
Performance assessment and fast diagnosis of a 𝜇-CHP solid oxide fuel cell system 0.07
Sensors-enabled approach for real-time quantification of lithium plating under extreme environments 0.83
Health driven cost-benefit analysis of provincial decarbonization pathways for China's cement sector 0.88
Dynamic modeling and optimal control of switching modes in reversible solid oxide cells for integrated electric-hydrogen energy system 1.00
Cross-capacity internal temperature estimation in lithium-ion batteries using multiple impedance features from the negative electrode 1.00
Solution distribution strategy-based structural optimizations in liquid desiccant dehumidification systems: A review 1.00
Advancing calcium-based thermochemical heat storage: Impact of a dual-reaction strategy on the system performance 1.00
Offshore self-powered communication and positioning enabled by efficient conversion of renewable salinity energy into green power utilizing low-cost asymmetric nano-hybrid hydrogel membrane 1.00
A novel SOC consistency evaluation method based on dynamic reconfigurable battery energy storage system 1.00
Optimal membrane thickness for proton exchange membrane (PEM) electrolyzer considering gas crossover and membrane degradation 1.00
A coupled multi-physics study on Li-ion batteries under impact loading 0.25
Experimental investigation on the impact of ambient temperature and current load rate on the cold start behavior of a short PEMFC stack 1.00
The work region and total work capability of integrated energy system: Concepts, models, and mechanisms 1.00
Review on crossover minimization and catalytic layer-promoted water dissociation in bipolar membranes 1.00
Flow-induced viability for sintered titanium fiber felt as anodic porous transport layer in proton exchange membrane water electrolyzer 1.00
PEG-based solid-solid phase change materials for passive cooling of solar photovoltaic panels 1.00
Investigation on a novel model of PEMFC stack integrated with micro heat pipe arrays and multi-objective optimization 1.00
Aging-induced, rate-independent Lithium plating: A complete mechanism analysis throughout the battery lifecycle 0.75
The voltage uniformity analysis of high-power proton exchange membrane fuel cell stack during cold start 1.00
Online estimation of inertia-supporting sustaining power boundary of lithium-ion battery energy storage systems based on model-data fusion method 1.00
The role of temperature in mechanical degradation of catalyst coated membrane in fuel cell: A 4D in-situ investigation based on X-ray computed tomography 1.00
Slight overdischarge cycling-induced severe degradation of electrochemical and mechanical properties of lithium-ion batteries 1.00
Refined multi-state modeling based battery energy storage system reliability indicators and evaluation 1.00
A review on thermal management strategy for liquid-cooling proton exchange membrane fuel cells: Temperature regulation and cold start 1.00
Mechanism and analytical modeling of high-rate discharge aging in lithium-ion batteries: Emphasizing cathode current collector dissolution and particle fracture 1.00
Modeling and understanding of multi-step reactions and mass transfer coupling in Li-O2 batteries with mesoscale heterogeneous electrode structures 1.00
Adaptive diagnosis and prognosis for Lithium-ion batteries via Lebesgue time model with multiple hidden state variables 1.00
Dynamic simulation of a subcritical coal-fired power plant with the emphasis on flexibility 1.00
Enhancing energy efficiency of free-piston engine generator through the controllable cycle method: Analysis of energy gain and consumption 1.00
Control-oriented thermal management strategies for large-load fluctuation PEM fuel cell systems 1.00
Study on two-phase transport and performance characterization in orientational structure proton exchange membrane fuel cells at high water content 1.00
Low-energy-consumption CO2 capture via coupling process of direct organic fluid stripping with biphasic solvents 1.00
Fault detection for lithium-ion batteries of electric vehicles with spatio-temporal autoencoder 1.00
Fuel cell health state estimation based on a novel dynamic degradation model under non-fixed dynamic vehicle working conditions 1.00
Recent advances in pyrolysis upcycling of waste plastics into hydrocarbon fuels on biochar-based catalysts 1.00
Metallic heterostructure enables high performance in low temperature ceramic fuel cells 0.78
An impedance-based electro-thermal model integrated with in-situ lithium-plating criterion for AC heating at low temperatures 0.86
Efficient and adaptive hydrogen production via integrated full-Spectrum solar energy and solid oxide electrolysis cells with thermal storage 1.00
Research on the state-of-the-art of efficient and ultra-clean ammonia combustion: From combustion kinetics to engine applications 1.00
Toward low-data and real-time PEMFC diagnostic: Multi-sine stimulation and hybrid ECM-informed neural network 1.00
The potential of machine learning to predict melting response time of phase change materials in triplex-tube latent thermal energy storage systems 0.40
Multi-objective and multi-stage capacity planning for low-carbon iron and steel industry empowered by wind-gas‑hydrogen energy 1.00
Adaptive model-based optimal control of hybrid deep borehole ground source heat pump systems with integrated latent heat thermal energy storage 0.25
Recent advancements in designing high-performance proton exchange membrane fuel cells: A comprehensive review 0.14
Rapid diagnosis and assessment of lithium-ion battery short circuit in three seconds across a wide range of short-circuit resistances 1.00
A comprehensive review of cold start in proton-exchange membrane fuel cells: Challenges, strategies, and prospects 1.00
Degradation behavior of ionomer in the cathode catalyst layer of polymer electrolyte fuel cells 1.00
Investigation of lithium-ion battery degradation by corrected differential voltage analysis based on reference electrode 1.00
Study on performance of seawater-based evaporative cooling integrated with desiccant wheel air-conditioning system for marine vessels 1.00
A review of the performance and application of molten salt-based phase change materials in sustainable thermal energy storage at medium and high temperatures 1.00
Achieving 100 % renewable e-methanol incorporating biomass-fired generation: A techno-economic study 0.75
Degradation analysis of dynamic voltage response characteristics of proton exchange membrane fuel cells for health evaluation under dynamic load 1.00
Bridging the gap between prediction and real-time diagnosis of water failures in proton exchange membrane fuel cell stacks via gas distribution characterization 1.00
Fractional variable-order observer-based method for state-of-charge estimation of lithium-ion batteries 0.88
Estimate state of charge in lithium-ion batteries with unknown data 1.00
On characteristics and research development of coupled fuel cell stack performance and stress 1.00
Fault-tolerant method of open-cathode PEMFC based on adaptive strong tracking Kalman filter combined with Hampel algorithm 0.93
Battery intelligent temperature warning model with physically-informed attention residual networks 0.92
Asymmetric auto-rebalancing of electrolyte for high capacity retention and high energy efficiency of vanadium redox flow batteries 0.25
Advances and prospects of low temperature Li S batteries 1.00
Study on the performance improvement of thermal storage tank by encapsulating PCM in the shape of red blood cells 1.00
Effect of the number of parallel batteries on thermal runaway evolution in LiFePO4 battery 1.00
Evolution of current distribution and performance degradation mechanism of PEMFC during transient loading under gas starvation condition: An experimental study 1.00
Inconsistency identification for Lithium-ion battery energy storage systems using deep embedded clustering 1.00
Enabling high-fidelity electrothermal modeling of electric flying car batteries: A physics-data hybrid approach 0.83
Battery abnormality detection based on important sample selection for large-scale vehicle monitoring 1.00
Model-free reinforcement learning-based transient power control of vehicle fuel cell systems 1.00
Online identification of knee point in conventional and accelerated aging lithium-ion batteries using linear regression and Bayesian inference methods 1.00
To convert or not to convert: A comparative techno-economic analysis on CO2-to-methanol and CO2-EOR 1.00
Modeling of solid oxide cells with mixed ionic electronic conductor electrolytes using a unified electrochemical potential model 1.00
Low-carbon economic dispatch of iron and steel industry empowered by wind‑hydrogen energy: Modeling and stochastic programming 1.00
Multi-dimensional building carbon emissions echelon peak target setting in China based on building types, sources, and indicators 1.00
Experimental design and assessment of a novel mixed-cooling proton exchange membrane fuel cells stack for enhanced power generation and thermal management 0.71
Zero-carbon-emission electrochemistry-thermochemistry-assembled full-spectrum solar fuel production 1.00
Graphene-based advanced materials for energy storage and conversion systems: Progress, challenges, and commercial future 1.00
Seasonal Thermochemical Energy Storage with Affordable and High-Energy-Density Deep Eutectic Solvents 1.00
Multi-objective optimization of cascaded packed bed thermal energy storage unit based on response surface and factor analysis methods 0.38
Optical and simulation investigation of effect of jet-wall interaction on combustion performance of methanol pre-chamber turbulent jet ignition system 1.00
State-of-health estimation and knee point identification of lithium-ion battery based on data-driven and mechanism model 1.00
Process analyses on sorption-enhanced electrified steam methane reforming for near-zero emission hydrogen production with CO2 capture by calcium looping thermochemical reaction 1.00
Exergy analysis-based operating parameter optimization for hydrogen energy hub 1.00
Experimental and simulation study on internal thermal runaway development drives venting and flammable gas risk evaluate of Lithium-ion battery 1.00
Performance and stability of renewable fuel production via H2O electrolysis and H2O–CO2 co-electrolysis using proton-conducting solid oxide electrolysis cells 0.63
Online estimation of negative electrode overpotential and detection of lithium plating of batteries using electrochemistry-driven Kalman filter closed-loop framework 0.80
Experimental study on heat and mass transfer enhancement of open cathode proton exchange membrane fuel cells using turbulence grids 1.00
36 34.62
Trace alkynyl diol mediated interfacial engineering for ultrastable zinc metal anodes 1.00
Sunlight-assisted enhancement of hydroelectric generators utilizing p-type and n-type CNT fabrics 1.00
ZIF-67-preloaded bacterial cellulose aerogel with strong Lewis acid–base interactions fabricating homogeneous solid composite electrolyte for lithium metal batteries 1.00
A molecular selenium iodide cathode and hybrid electrolyte for solid-state Na–Se2I2 batteries 1.00
High-performance solar-blind UV photodetector based on Ti3C2Tx MXene/α-Ga2O3 heterojunction 1.00
Field-effect and defect engineering tunable 2D-PDBG+ monolayer: An anode for calcium-ion batteries with ultra-high capacity and fast kinetics 1.00
Unified catalysis and confinement in a Prussian blue analogue via anisotropic lattice distortion 1.00
The cooperative cation–π interaction in two-dimensional THD-C as a high-capacity anode material for Li-ion batteries 1.00
Hydrogen crossover in PEM water electrolyzers at high current density: Impact of temperature rise 1.00
Petroleum coke-derived porous carbon encapsulating phase change materials for solar-thermal-electricity output 1.00
Direct observation of the (de)lithiation process on the multi-particle LiFePO4 by in situ TEM 1.00
Predicting anode coatings for solid-state lithium metal batteries via first-principles thermodynamic calculations and hierarchical ion-transport algorithms 1.00
Covalent bond chemistry enabling M2CN2 MXenes as anode materials for halide-ion batteries 1.00
In situ construction of porous ZnO layer with more exposed (002) polar facets toward long-cycling zinc metal anodes 1.00
Epoxy-driven carbon host engineering enables ultrafast wetting and dendrite-free K metal anode 1.00
Oxygen plasma-engineered ZnF2 with built-in electric field enables rapid Zn2+ transport for robust Zn metal batteries 1.00
B-Site engineering of the nanocomposite perovskite SrCo0.5−xFeAlx O3 cathode for enhanced ORR kinetics and high-performance low-temperature ceramic fuel cells 0.90
Real-time SOC monitoring in NCM Li-ion batteries via quasi-static component of nonlinear guided wave 1.00
Interface engineering-driven amino/sulfide dual-functionalized MXene aerogel for highly ion-accessible charge storage system 1.00
Monolayer, bilayer, and heterostructure B2C16 as potential anode materials for lithium-ion batteries: A first-principles study 1.00
Janus flexible electrode with built-in electric field for high-performance Li–S batteries 1.00
Insights into the effect of graphene on Cu electrical conductivity: Experimental investigations of Cu foil coated with graphene 1.00
Catalytic NiO/Ni/N-doped carbon nanoreactors for suppressing polysulfide shuttle: In situ Raman spectroscopic validation 1.00
Binder-free Co9S8/Ni7S6 heterostructure electrodes via one-step electrodeposition for high-performance coplanar micro-supercapacitors on paper 0.89
Switchable nonlinear optical isolator in MXene 0.13
Interlayer current collectors optimize the surface micro-cracks of gas diffusion electrode for stable CO2 electrolysis 1.00
Multi-functional amino acid enabling global ion regulation for high-performance aqueous Zn–I2 batteries 1.00
The suppression effect of Mg doping on oxygen redox in Mn-based layered oxide cathodes for sodium-ion batteries 1.00
Cold sintered semiconducting composites through integrating 2D MXene into the grain boundaries of Na2Mo2O7 dielectric ceramic 0.83
Enhanced physical and chemical binding of MXene/CNT composite and Ni catalytic conversion to boost the performance of Li–S battery 1.00
Quantum-confined ultramicropores in nodal-line semimetal C32 for high-efficiency lithium/sodium-ion battery anodes 1.00
In situ alloyed zinc–copper layer accelerates Zn ion migration for highly reversible Zn anodes 1.00
Discrete V2O5/NCQDs heterogeneous assemblies synergizing built-in fields and confinement for enhanced aqueous zinc ion storage 1.00
Bonded β12-borophene/hybrid honeycomb–kagome silicene heterostructure: A high-capacity anode with robust structural stability for Na-ion batteries 1.00
Lithiation dynamics in vertically aligned 1T-PtSe2 and its application in dendrite-free lithium metal batteries 1.00
Phosphatized garnet-based solid electrolyte enables a sub-10-μm-thick lithium metal anode 0.88
202 197.45
Tailoring solvation chemistry towards concurrent hydrolysis-free I−/I+ redox and reversible Zn anode in Zn–I2 batteries 1.00
A dipole-aligned polymer electrolyte enabling directed Li+ migration for all-solid-state Li–S batteries 1.00
A highly stable Fe-based catalyst from partially leached Al–Fe–Si alloy for hydrogenation of CO2 to light olefins 1.00
Dual-temperature photothermal tandem catalysis for CO2 conversion to olefins 0.86
A sodium polyphosphate-induced gel interfacial layer enables a stable Zn anode under harsh conditions 1.00
Tuning ruthenium states for enhanced polyethylene hydroconversion over HZSM-5 catalysts 1.00
Hydrophobic carbon dots as spatial confiners for isolating Pd nanoparticles for efficient nitrobenzene hydrogenation 1.00
MoS2-supported highly dispersed PtCu bimetallic nanoparticles for enhancing furfural selective hydrogenation to 2-methylfuran 1.00
Regioisomerism and π–π interaction synergistically enable mechanical-ionic decoupling of anion exchange membranes for hydrogen conversion 0.88
Partial occupation of selenium in porous carbon enhances selenium utilization for potassium-ion batteries 1.00
A dual-additive strategy constructing robust Li3N-Rich SEI and proton scavenging for high-rate lithium metal batteries 1.00
One-pot tandem epoxidation and rearrangement of styrenes to phenylacetaldehydes over a bifunctional metal–organic layer catalyst 1.00
Heteroatom-doped helical carbonaceous nanotubes with ultrafine SnO2 nanoparticles as an active anode for lithium-ion batteries 1.00
A bimetallic MOF-derivative enabled multi-sited current collector for high-performance anode-free lithium metal battery 1.00
Dynamic surface protection of a Zn anode by N,N-dimethylamide-based molecules for use in aqueous batteries 1.00
Dielectric morphology engineering: a hydrogel electrolyte with a balanced local electric field to enhance the migration number of zinc ions 1.00
The impact of Pt particle size distribution on the HER pathway and performance 1.00
Bionic construction of iron ion-specific porous adsorbents for mitigating iron toxicity across diverse organisms 1.00
A slime mold-bioinspired MXene membrane for efficient uranium immobilization 1.00
Lithium-induced reconstruction of Li4Ti5O12 for acidic H2O2 production via two-electron water oxidation 1.00
Rapid and green etching of MAX into MXene phase via a physical process 1.00
Spherulite-packed polymer electrolytes with high ion selectivity for stable lithium–sulfur battery performance 1.00
Reversible redox chemistry of disulfide/thiol for aqueous organic flow batteries 1.00
Macro-mesoporous carbon architectures for confining sulfur and facilitating Li+ transport in high-performance Li–S batteries 1.00
Solvation regulation and interfacial adsorption by ethanolamine-based eutectic electrolytes toward byproduct-free zinc anodes 1.00
A COF-decorated nanocellulose separator affording modulated ion transport for advanced Zn metal batteries 1.00
Nitrogen-enriched precursor lowers debromination temperature for solid-state polymerization into high-performance lithium storage electrodes 1.00
Synergistic interaction of electroless-deposited tin and polymer layers for lithium dendrite suppression and extended cycle life 1.00
Imidazolium-functionalized metalloporphyrin porous organic polymers for catalytic CO2 conversion into cyclic carbonates 1.00
Theoretical insight into h-Fe7C3 catalyzed Fischer–Tropsch synthesis: unraveling the C2+ product formation mechanism and surface-specific electronic descriptors 1.00
A multi-functional polymer coating enabling stable Zn anodes for high performance zinc-ion batteries 1.00
Amorphization and defect engineering of Nb2O5 within a graphitic nanocage array for catalytic polysulfide conversion in lithium–sulfur batteries 1.00
Generating abundant Co3+ species via H2O/N2 mixed atmosphere pyrolysis of CoZn-ZIF for catalytic transfer hydrogenation 1.00
A copper phyllosilicate and CeO2 integrated catalyst for the rapid catalytic transfer hydrogenation of furfural to furfuryl alcohol 1.00
Direct NF2 functionalization of ketones: a mild strategy for accessing high-performance gem-difluoroamino compounds 1.00
A Li+/Zn2+ hybrid electrolyte revolutionizes V-MOF cathode performance and zinc anode reversibility 1.00
A highly active and durable bimetallic CoMnOx catalyst supported on carbon nanofibers for peroxymonosulfate activation toward water treatment 1.00
A pyrene-4,5,9,10-tetraone/graphene composite film as a sustainable cathode material for aqueous iron-ion batteries 1.00
Nitridation-driven construction of Ru/WNO catalysts enables highly selective cellulose to C2 alcohols hydrogenolysis 1.00
Synergistic effect of A-site deficiency and exsolved Fe particles in Sr1−xFeO3−δ cathodes for enhanced CO2 electroreduction in solid oxide electrolysis cells 1.00
Phenothiazine-based anodes with π-conjugation extension and dynamic charge balance enabling ultra-stable hydronium-ion batteries 1.00
Offline catalytic behavior in the preparation of FDCA from biomass and CO2 1.00
Dual regulation of interface and bulk phase by a multifunctional additive for constructing stable zinc–sulfur batteries 1.00
Efficient singlet oxygen (1O2)-mediated photocatalysis-driven Achmatowicz rearrangement based on a gas–liquid–solid tri-phase system 1.00
An interfacial engineering strategy of a VS2/CNT 3D conductive network for stable and high-performance zinc-ion batteries 1.00
Polymerization-induced fluoroacetonitrile-based heterogeneous lithium metal batteries 1.00
Cerium vanadate hollow sphere-mediated polysulfide immobilization and conversion toward lithium–sulfur batteries 1.00
Crumpled and porous N-doped MXene microspheres for promoting sulfur redox kinetics in Li–S batteries 1.00
Montmorillonite nanoreactors for synergistic confinement synthesis and ion-conduction in stable sulfurized polyacrylonitrile cathodes 1.00
Boosting the lithium storage capability of Li+-conductor LiInGeO4 through intrinsic and extrinsic conductivity optimization 1.00
Sulfonate ester electrolyte regulates Li+ desolvation energy to construct high-rate aqueous lithium-ion batteries 1.00
Symmetrical capacitive deionization battery enabling dual capture of fluoride and copper ions 0.85
Dinitroaromatic hydrogenation over a Pt@Beta zeolite catalyst with ammonia borane 1.00
Covalent organic framework-based solid-state electrolytes for lithium metal batteries: from materials to applications 1.00
A review on membrane fouling and anti-fouling modification strategies of PVDF membranes in oil–water separation 1.00
Atomic-level Fe doping in MoO2/C hollow nanospheres for enhanced polysulfide adsorption and catalytic conversion 1.00
A nitrogen-rich phenazine-fused hexaazatriphenylene cathode enables low-temperature potassium battery operation at −50 °C 0.06
Rational design of lignin-based materials for high-performance zinc-ion energy storage systems: fundamentals, advances and perspectives 0.86
Lithium-rich disordered rock salt Li1.25V0.5Nb0.25O2 as the anode material for lithium-ion capacitors 1.00
A molecularly engineered flame retardant composite at ultra-low loading enables a safe PDOL electrolyte for solid-state Li metal batteries 1.00
Facile synthesis of a self-stabilized lamellar mica membrane for efficient organic solvent nanofiltration 1.00
A dimethylacetamide-based eutectic electrolyte for high-performance aqueous lithium-ion batteries 1.00
Recent advances in hydrogel polymer electrolytes for stable zinc metal anodes 0.50
Designing a ternary NiS2/CoS2@SnS2 nanocube as a secondary battery anode displaying excellent capacity and stability 1.00
High-entropy oxides as efficient bidirectional sulfur catalysts for low-temperature lithium–sulfur batteries 1.00
Freestanding porous Mn2O3/carbon nanotube film cathodes for high-performance aqueous zinc-ion batteries 1.00
Ordered assembly of bifunctional catalysts via 3D printing for CO2 hydrogenation to light olefins 1.00
High-valent manganese promotes percolating K-vacancy networks to boost bulk K+ conduction in K2−γMnxFe4−xO7−δ 1.00
In situ grown CNTs and electrodeposited MnO2 on MXene-carbon nano-fibers for flexible supercapacitors with high energy density 1.00
Surface Ni–O–Co sites in cube-shaped Ni–Co3O4 spinel oxides for boosting soot oxidation 1.00
High-temperature reconstruction of carbon nanotubes with iron impurities as built-in catalysts for potent electrical-conductive additives in supercapacitor electrodes 1.00
Advanced halide/sulfide all-solid-state lithium metal batteries with fluorinated interface layer 1.00
MnFe-PBA-derived porous catalysts with enhanced peroxymonosulfate activation for tetracycline removal: insights from experiment and theory 1.00
Tailoring strong Brønsted acid sites in HZSM-5 for selective aromatics production from CO2 hydrogenation 1.00
Precise molecular engineering in hydroxyl-containing conjugated microporous polymers for optimized hydrogen peroxide production 1.00
High entropy FeCoNiMnZnS2 with a yolk–shell structure for high performance lithium–sulfur batteries 1.00
Enhanced electrochemical Cs+ extraction performance enabled by a MoS2/Ni3S2 heterostructure counter electrode 1.00
An aqueous Al–PbO2 battery with pH-gradient engineering surpasses 3.5 V 1.00
Ionic hypercrosslinked polymers featuring hydrogen bonds and Lewis base sites for enhancing the CO2–epoxide coupling reaction 1.00
Aqueous-phase synthesis of hollow ZIF-8@poly(ionic liquid) core–shell nanoreactors for enhanced CO2–epoxide coupling reaction 1.00
A Mo2C–MoP heterostructure enabled catalytic route for high-performance lithium–sulfur batteries 1.00
Electro-synergy for the degradation of refractory organic pollutants: coupling heterogeneous electro-Fenton and electro-oxidation 1.00
Uneven Co–N–C-coated graphene as a durable support for low-loading Pt oxygen reduction catalyst 1.00
Suspending redox-active phenothiazine on a conjugated polythiophene cathode for aluminum dual-ion batteries 1.00
Rational design of two-electron oxygen-reduction electrocatalysts for H2O2 production and their in situ integration with oxidation reactions in green chemical processes 1.00
Innovative perspectives on strategies for enhancing the stability of anion exchange membrane electrolyzers 1.00
Stabilizing the anodic interface for solid-state lithium metal batteries by combining a low-strain lithium/carbon anode with a polymer electrolyte 0.86
b-Axis engineering of zeolite enables activity–stability synergy in propane dehydroaromatization 0.89
Metal–organic-framework-derived Fe/Sn bimetallic electrocatalyst for efficient oxygen reduction reaction in rechargeable zinc–air batteries 1.00
Structural isomerism in Ce-MOFs directs Ni/CeO2 catalyst design for selective fatty acid deoxygenation to linear α-olefins 0.86
A review of MOF-based composite phase change materials for battery thermal management 1.00
Tailoring triphenylamine cathode structures for high-voltage and temperature-robust lithium organic batteries 1.00
Tetrahydrofuran-mediated hydrogen bonding for stabilized zinc anodes 1.00
Electrostatic-field-induced growth of V2O5 superlattices with PTFE for advanced zinc-ion batteries 1.00
Pore structure design via modified phase inversion strategy toward high-performance hard carbon anode 1.00
Balancing energy and thermal stability: a review of advanced heat-resistant energetic materials 1.00
Recent progress in efficient zeolite-based catalysts for catalytic conversion of C1 molecules 1.00
A low-potential lithium-biphenyl anolyte for high-performance nonaqueous redox flow batteries with a metal–organic-framework-based separator 1.00
A reactive terminator dual-tuning polyamide structure for high-performance nanofiltration membranes 1.00
Highly efficient electrooxidation of biomass-based furfuryl alcohol to 6-hydroxy-2,3-dihydro-6H-pyrano-3-one over Zn–Al bimetallic oxides 1.00
Sustainable electrocatalytic platforms for biomass valorization: transforming 5-hydroxymethylfurfural into value-added chemicals using earth-abundant metal electrocatalysts 1.00
Hydrophobic–zincophilic double-ingredient interfacial design enables a stable Zn anode 1.00
Engineering covalent triazine frameworks for high-performance lithium–sulfur batteries 0.86
Synergistic effect of multi-metallic and dual-functional groups of a MOF@rGO layer for the catalytic transfer and shuttle inhibition of lithium–sulfur batteries 0.69
A hair-thin fiber aqueous rechargeable Zn-ion battery with high energy density 1.00
Electroreductive carboxylation of graphite with CO2 for lithium–sulfur batteries with boosted performance 1.00
A ternary Cu alloy current collector for high-performance aqueous Zn-ion batteries 1.00
Hierarchically structured polyamide/cellulose acetate/UiO-66 hybrid membrane constructed via non-solvent induced phase separation/coaxial electrospray-interfacial polymerization for desalination 1.00
Fiber separators: optimizing bulk and interface behaviors in high energy batteries 1.00
Modulating spherical lithium deposition behaviour via guanidine nitrate as an electrolyte additive: enabling dendrite-free lithium metal anodes 1.00
Soft carbon-coated FeNCN anodes for enhanced potassium ion storage 1.00
Recent advances in covalent organic framework-based catalysts for the electrosynthesis of hydrogen peroxide 1.00
Harnessing anion-driven interfacial chemistry to suppress water reactivity for stable Zn metal anodes 1.00
One-pot synthesis of a polydopamine-glued g-C3N4/CoxFe1−xWO4 membrane for synergistic photocatalytic water purification 1.00
Pt nanoparticle-embedded NiFe-LDH nanoflowers as a high-performance cathode for rechargeable aqueous zinc–air batteries 1.00
Interfacial pH regulation by a tetra-hydroxyl organic additive enables stable zinc anodes in aqueous batteries 1.00
Effects of a sulfonated hydrophilic cross-linked network on the microstructure and properties of Nafion matrix 1.00
Efficient catalytic sulfur conversion in aqueous zinc-sulfur batteries mediated by iodide-coupled ether groups 1.00
La/Ni dual-doping in carbon nanofiber-supported cobalt electrocatalysts toward high-efficiency biomass upgrading 1.00
Bifunctional artificial sodium polysulfide mediators boosting the sodium storage performance of the Fe3O4 anode 1.00
Covalent organic frameworks with engineered active sites for selective Knoevenagel condensation catalysis 1.00
Novel strategies for low overpotential metal–air batteries 1.00
A dual network hygroscopic gel for efficient atmospheric water harvesting 1.00
Mitigating voltage degradation in anion exchange membrane water electrolyzers by membrane–electrode interface engineering 0.88
Carbon particle aggregation for enhanced flow capacitive deionization 1.00
Application of porous bismuth-based materials in sodium ion batteries 1.00
Carbonyl-rich organic cathodes for advanced aqueous batteries: progress and perspectives 1.00
Synergistic catalysis of VN quantum dots and S/N heteroatoms enabling fast reaction kinetics for lithium–sulfur batteries 1.00
Thermal-shock-processed thin proton exchange membranes for efficient and durable water electrolysis with reduced hydrogen crossover 0.60
Anion-tethered interface engineering enabling dendrite-free lithium metal anodes 1.00
A polymer pillar for the VOPO4 cathode to retain voltage stability in aqueous zinc batteries 1.00
A multifunctional imidazole-based binder for high-performance aqueous Zn–I2 batteries 1.00
Carbon nanotubes decorated with zinc oxide quantum dots enable high-efficiency lithium–sulfur batteries 1.00
Synergistic polypyrrole coating and electrolyte engineering toward high-performance Zn-based batteries 1.00
Suppression of electrolyte decomposition and protection of the lithium metal anode via a lactone additive 1.00
A Zn@Sn powder anode for side reaction-resistant and stable aqueous zinc-ion batteries 1.00
Catalytic Co/Cu heterostructure nanoparticles in N-doped carbon spheres boost polysulfide redox kinetics 1.00
Divalent transition metal ion intercalated hydrated V2O5 nanosheet cathodes for ultra-long cycling aqueous zinc-ion batteries 1.00
Chain-section engineering enables electron delocalization for efficient photocatalytic H2O2 synthesis in d-glucuronolactone-derived polymers† 1.00
Peripheral environmental effect for the electrochemical reduction of 1,2-dichloroethane over a single Co–N4 site 1.00
Synergistic binary catholyte design for enhanced electrochemical performance in membraneless hybrid flow batteries 0.67
Porous MgO Supported Ba-Cs-Ru/MgO Catalysts for Superior NH3 Synthesis and the Effect of Ru Loading on Dispersion of Ru and Promoters 1.00
Fluorine doping of biomass-derived hard carbon for boosted sodium-ion storage 0.89
Novel hollow carbon nanorings with biconcave structure for advanced potassium ion batteries 1.00
Chemically pre-sodiated Na₁₅Sn₄ interphase enables high-reversibility anode-less sodium metal batteries 1.00
The superiority of W6+ overturns the CO2 hydrogenation selectivity of iridium 1.00
A dual-functional sodium alginate–poly(zinc acrylate) hydrogel electrolyte for enhanced stability of aqueous zinc-ion batteries 1.00
Synergizing acid–base sites and lattice distortion of amorphous basic cobalt carbonate for transfer hydrogenation 1.00
Reverse electron transfer in Ru/HfB2 drives selective hydrogenation via strong metal–support coupling 1.00
Bromide-mediated selective electrocatalytic oxidation of ethylene to ethylene glycol using non-precious metal catalyst Sn–NiSb2O6 1.00
Pore structure engineering in peat-derived hard carbon via confined carbonization for boosted sodium storage 1.00
A ZnSe/Bi2Se3 heterostructure as a sodium-ion battery anode displaying fast reaction kinetics, high capacity, and good full-cell performance 1.00
Electrolyte engineering enables high-energy Li‖CFx battery operation at ultralow temperatures 1.00
Sulfur confinement via C–S bonding for stable sulfur conversion in aqueous Zn–S batteries 0.89
Dual-component modulation strategy for enhancing interfacial compatibility in 4.6 V LRMO-based solid-state lithium metal batteries 1.00
Enhanced electrocatalytic reduction of hexavalent chromium with reduced pH dependence ivia/i alternating potential polarization using a polyaniline–chitosan composite electrode 1.00
Zn-thiocatecholate functionalized MOF modified separator stabilizing zinc anodes for long-life aqueous zinc-ion batteries 1.00
Redox-active polymer/graphene composite anode for advanced aqueous zinc-ion batteries 1.00
Tetraamino-driven hydrogen-bonded networks: selective self-assembly of energetic materials 1.00
Mechanism of metal doping in regulating the boron adsorption performance of Fe3O4 nanoparticles 1.00
A coupled system accelerating the photocatalytic reduction of in situ captured CO2 to methane 1.00
Polyoxometalate-mediated confined self-assembly of sandwich-structured mesoporous polymer@rGO for high-performance aqueous zinc–iodine batteries 1.00
A Si3N4-modified cellulose/glass fiber hybrid separator inhibiting zinc dendrites and cathode dissolution for aqueous zinc-ion batteries 1.00
Aqueous–organic hybrid electrolyte stabilizing zinc metal anodes 0.80
Sn4P3-decorated 2D N-doped carbon nanosheets as efficient polysulfide barriers for Li–S batteries 1.00
Biomimetic fluoride-coated zinc anodes: pediatric dentistry inspires stable zinc batteries 1.00
Tailoring the alkyl chain length of linear esters in moderately concentrated electrolyte for a high-performance graphite anode in K-ion batteries 0.89
Facile synthesis of bicyclic heat-resistant energetic materials via a C–N coupling strategy 1.00
An in situ electropolymerizable thiophene-diketopyrrolopyrrole-based organic cathode for efficient lithium–organic batteries 1.00
Synergistic Ce/In dual-doping in La0.3Sr0.7FeO3−δ: breaking the activity–stability trade-off in SSOFC electrodes 1.00
An intelligent ion-sieving bridge enabled by a zinc-rich artificial SEI layer with high Zn2+-conductivity for reversible zinc metal anodes 1.00
Regulating p-type conjugation in bipolar polyimide covalent organic frameworks for high-performance zinc dual-ion batteries 1.00
A gradient solid electrolyte interphase strategy through corrosion suppression and controlled crystal growth for zinc–metal batteries 1.00
A silver–bismuth bimetallic functionalized negative electrode for iron–chromium flow batteries 1.00
Boosting lithium compatibility and air stability of halide electrolytes through cyanamide substitution 1.00
2,4-Difluorophenyl isothiocyanate as a redox mediator in the electrolyte for kinetically favorable Li–S batteries 1.00
Multifunctional antifouling sustainable membranes integrating MIL-125(Ti) and carboxylated cellulose nanofibers for self-cleaning and dye degradation 1.00
Conversion of CO2 into cyclic carbonates using an ionic porous organic cage 1.00
Ultrafine cobalt nanoparticle-decorated carbon submicron-cubes enhance polysulfide trapping and redox kinetics in lithium–sulfur batteries 1.00
Synergistic adsorption and catalysis enabled by hollow Co9S8–CoO heterostructures for high-performance lithium–sulfur batteries 1.00
Enhancing zinc anode stability via dual-additive electrolyte engineering 1.00
Ce3+-induced in situ reconstruction of LaFe0.7Ni0.3O3−δ into a three-phase nanocomposite cathode for IT-SOFCs 1.00
Continuous flow fabrication of metal organic framework capillary gas chromatographic column 1.00
A porous PEDOT:PSS network over Cu foil for highly reversible dendrite-free zinc deposition 1.00
Interfacial cation engineering in δ-MnOsub2/sub nanosheets for efficient oxygen reduction reaction 0.88
Reversible Na15Sn4 alloy compensation for hard carbon anodes to enhance the initial coulombic efficiency in sodium-ion full cells 0.95
Heterocyclic molecule's coordination chemistry induced water-lean interface for achieving stable zinc anode 1.00
Compositional doping and structure insights for high-performance aqueous Zn-ion batteries 1.00
A solid solution alloy current collector to stabilize zinc metal anodes 1.00
Fabrication of a vanadium-doped Ni-MOF with a hydrangea-like morphology as an electrode for high-performance supercapacitors 1.00
An integrated all-flexible zinc-ion battery based on leather gel electrolyte 1.00
A conformation-driven percolative interface architecture in phase-engineered 3D printed graphene/PEDOT:PSS supercapacitors enabling ultra-high energy density and superior ion transport 1.00
Bio-derived chitosan additive enables anion anchoring and Zn(002) deposition for high-performance Zn anodes 0.88
Current status and perspective of metal-free materials as catalysts in acetylene hydrochlorination: active site, dopant, and mechanism 1.00
A dendrite growth-suppressing Li composite anode decorated with lithiophilic Li–Pb alloys for stable Li metal batteries 1.00
Halide-mediated Ag–Zn batteries in alkaline electrolytes 1.00
High-performance rechargeable monovalent- and bivalent-ion batteries: from emerging nanomaterials to in-depth mechanisms 1.00
Edge-hosted Fe single-atomic sites fabricated by a Bi-assisted pyrolysis strategy for electroreduction of CO2 1.00
The exploration and analysis of the superfluous lithium storage capacity of a Bi2Se3-based composite 1.00
Constructing electron-deficient Co centers in the lattice of oxygen-vacancy-rich CuO for improved PMS activation and contaminant degradation 1.00
Mechanistic insights into biomass-based furfural electrooxidation to 5-hydroxy-2(5H)-furanone over mesoporous polymers 1.00
Insights into the enhanced electrochemical performance and energy storage mechanism of a manganese vanadate cathode for rechargeable aqueous zinc ion batteries 1.00
88 83.79
Compatible bridged interphase with enhanced Li ion migration for durable quasi-solid-state lithium metal batteries 1.00
Electrochemical fractionation of stable sulfur isotopes in a rechargeable lithium–sulfur battery: a revisit from the law of mass conservation 1.00
A carbon nanotube-modified electrode for a highly active and reversible Sn4+/Sn anode 1.00
A dual-function molecule enables stable four-electron conversion and Zn deposition for high-capacity aqueous Zn–I2 batteries 0.88
A fluorine-absorbing and mechanically elastic binder with triangular architecture enables both bulk- and interface-stable Si anodes 0.87
Deciphering functional differentiation of elements in high-entropy spinel oxides as ultralong-life anodes in lithium-ion batteries 1.00
Orbital hybridization-mediated synergistic multi-electron redox in a NASICON cathode unlocking solid-solution reactions for ultrafast and durable sodium storage 1.00
Coupling abundant active sites and an ultra-short ion diffusion path: R–VO2/carbon nanotube composite microspheres boosted the performance of aqueous ammonium-ion batteries 1.00
Ultra-low concentration gel polymer electrolytes realize stable and low-temperature lithium–organic batteries 1.00
Nanoconfinement-induced high-rate performance of hard carbon for densified sodium cluster storage 1.00
Tailoring terminal groups in sulfonyl solvents to boost compatibility with lithium metal anodes 1.00
High-yield synthesis of graphene quantum dots from spent graphite and application in hydrogel Zn batteries 1.00
Adaptive lattice breathing enabled by Cu/Mg co-doping for stable anionic redox chemistry in sodium layered oxides 1.00
Pd–Cu dual-site tuned H adsorption for efficient electrocatalytic hydrogenation of HMF 1.00
Membrane-free two-step water electrolysis enabled by a stable organic redox mediator 1.00
Hydro-photo-synergy unlocks deep and reversible chemistry of solid-state lithium–oxygen batteries 1.00
Unveiling bulk-to-interface electrolyte regulation for ultralong-life Zn-ion batteries 1.00
Unveiling sodium storage mechanisms in hard carbon via machine learning-driven simulations integrated with accurate site occupation identification 1.00
Dual-functional nanoengineering via molecular pillaring and conductive hybridization for high-performance aqueous zinc-ion batteries 1.00
Dipole-mediated interfacial solvation for efficient Li-ion transport in dendrite-free Li metal batteries 1.00
Highly zincophilic-hydrophobic polyzwitterionic hydrogel electrolyte with strong electronegative sulfobetaine-carboxyl motifs for ultrastable zinc-ion batteries 1.00
Highly efficient CO2 hydrogenation to long-chain linear α-olefins via CO intermediate enrichment over Na/FeMn/ZrO2 catalysts 0.64
Volmer–Weber growth of nano-island heterostructures on spinel cathodes: a route to stable high-voltage lithium-ion batteries 0.75
Ladder-type phenazine-linked covalent organic polymers with synergistic cation–π interactions for highly stable lithium metal batteries 1.00
A low-redox-potential phenazine-based negolyte with high stability for aqueous organic flow batteries 1.00
Surface chemistry regulation of conductive two-dimensional nanosheets with highly pseudocapacitive covalent groups for a high-performance flexible asymmetric microsupercapacitor 0.88
Tailoring electrolyte coordination structure for high-rate polymer-based solid-state batteries 1.00
Brønsted acid-promoted ethylene dimerization to 1-butene over Ni-containing zeolite catalysts 1.00
Breaking the lithium deposition limit: in situ fabrication of a CoN-doped carbon skeleton membrane for anode-free lithium metal batteries 1.00
Nonlinear current stimulation unlocks high-performance Zn–Mn batteries via reversible phase transformation 1.00
Hybridization-tuned dual-chain conjugated polythioether quinones for high-energy rechargeable magnesium batteries 1.00
Controllable synthesis of perovskite solid solutions as novel energetic materials via thermodynamic equilibrium 1.00
Broad-spectrum rejection of emerging organic contaminants with different structures and properties from complex water matrices by a chlorine-resistant Janus nanofiltration membrane 1.00
Topology engineering of COFs via localized 1D–2D unit interconnection to facilitate interfacial electron transfer for efficient gold recovery from e-waste leachates 1.00
Graphene oxide/carbon nanotube reinforced PCM microcapsules with high thermal conductivity and high latent heat for thermal energy storage 1.00
Hydroxyl radical generation from H2O2via liquid–liquid contact-electro-catalysis 1.00
Triazine-ring protonation enables synergistic enhancement of proton conduction and membrane stability 0.83
From surface-assisted synthesis of porous aromatic bulk sheets to readily assembled membranes for nanofiltration 1.00
Covalent organic framework catalytic membranes for durable multitasking water purification 0.75
High-entropy metal phosphide nanoparticles for accelerated lithium polysulfide conversion 1.00
Concentration-function coupled electrolytes harmonize thermodynamics and kinetics for stable zinc metal batteries 1.00
PdGa nanoalloys loaded on single atom Co dispersed nitrogen doped carbon for ethanol electrooxidation: improved C1 pathway selectivity and durability 1.00
Tailoring the electronic structure to enable rapid Li-ion diffusion and a stabilized LiF–LiCl rich electrode–electrolyte interface 1.00
Dual polarization in extended π-conjugated zwitterionic COF facilitates Li+ aligned transportation for high-performance solid-state lithium–metal batteries 1.00
A leveling–shielding dual strategy enabling stable zinc anodes to exhibit ultra-low interfacial impedance 1.00
Unlocking the potential of a multi-electron p-type polyheterocycle cathode: when it meets a small-size and high-charge anion 1.00
Unlocking ultra-low temperature performance: an anti-freezing, high-conductivity, biodegradable hydrogel electrolyte for supercapacitors down to −60 °C 1.00
Phosphorus-induced interfacial chemistry via electrolyte design for dense and highly stable potassium metal anodes 0.88
Hierarchical hollow nanospheres of imine-based covalent organic frameworks with built-in Ag sites for fast-charging lithium metal batteries 0.88
A cyanate-functionalized polymer composite electrolyte with a self-healing gradient SEI affords ultra-thermally stable lithium batteries 1.00
In situ analysis of gaseous products from PEO-based polymer electrolyte decomposition 1.00
Regulating the donor number of solvents for long-cycle anode-free lithium metal batteries 1.00
Unveiling the role of cobalt in the product regulation for CO2 hydrogenation to light olefins over alumina-supported Co–Fe catalysts 0.38
Hydrogen/solvent-free plastic valorization via loosely coordinated ruthenium sites steering selective aromatization 1.00
A weak acid-responsive porous polyelectrolyte membrane enables the high efficiency of a zinc anode interface 1.00
Stabilizing the electrode–electrolyte interface for high-voltage Li‖LiCoO2 cells using dual electrolyte additives 1.00
Decoding the influence of monomer structures on the electrical double layer of alkaline fuel cells 1.00
A dynamic amphiphilic additive with dual solubility modulates Zn2+ solvation and in situ SEI for a dendrite-free zinc anode 0.86
Solvation structure modulation via dipole–dipole interactions for high-rate lithium metal batteries exceeding 400 Wh kg−1 1.00
Unraveling plating/stripping-induced strain evolution ivia/i embedded sensors for predictive failure mitigation in solid-state Li metal batteries 1.00
Molecularly bridged design of an electron-delocalized dual redox-active organic electrode for high-efficiency capacitive deionization and water treatment 0.78
Rational crystal engineering of conductive metal–organic frameworks for promising electrochemical energy storage 1.00
Strengthened π-type interaction in layered oxide cathodes with reversible anionic redox for sodium-ion batteries 1.00
Iodide-mediated intermediate regulation strategy enables high-capacity and ultra-stable zinc–iodine batteries 1.00
Ultrathin potassiophilic carbon skin design achieving ultra-stable potassium metal anodes 1.00
Impact of stereochemistry in 3D energetic materials science: a case based on peripheral editing of the 2,4,10-trioxaadamantane backbone 1.00
Creating hydrophobic nanopockets in metal–organic frameworks to promote hydrodeoxygenation of lignin derivatives under ambient conditions 1.00
High-capacity aqueous imidazolium-ion batteries enabled by MMZ-H+/H+ co-intercalation in a near neutral electrolyte 1.00
Industrial electrooxidation of glutaraldehyde waste to glutaric acid via tailoring OH* coverage 0.86
Synergistic chaotropic effect and defect engineering promoting ultrahigh ionic conductivity in MOFs 0.88
Cu-mediated bipolar-type extended π-conjugated microporous polymers for lithium-ion battery cathodes with high energy density and fast-charging capability 1.00
A multinitrogen π-conjugated conductive polymer stabilizing ultra-large interlayer spacing in vanadium oxides for high-performance aqueous zinc-ion batteries 1.00
Dual-engine-driven synthesis of unsaturated esters over channel-expanding Cu–Cs catalysts 0.48
Enabling uniform lithiation in solid-state synthesis by preventing pre-matured surface grain coarsening through grain boundary engineering 1.00
Dynamic and interconnected influence of dissolved iron on the performance of alkaline water electrolysis 0.89
Vacuum evaporation-assisted reaction: sustainable solution for application of rare earth-based halide solid-state electrolytes 1.00
An electron-delocalized sp2-N hybridized organic electrode enables sustainable and high-efficiency electrochemical ammonium removal 1.00
Dual-metal sites enable conductive metal–organic frameworks with extraordinary high capacitance for transparent energy storage devices 1.00
Three-dimensional nanostructured composite lithium soap fibers for constructing high-performance lithium metal anode interfacial layers 1.00
Tailored engineering of primary catalytic sites and secondary coordination spheres in metalloenzyme-mimetic MOF catalysts for boosting efficient CO2 conversion 1.00
Design of cellulosic poly(ionic liquid)s with a hydrogen bond/ion dual regulation mechanism for highly reversible Zn anodes 1.00
Unraveling the mechanisms of ketene generation and transformation in syngas-to-olefin conversion over ZnCrOx|SAPO-34 catalysts 1.00
Insights into the halogen-induced p-band center regulation promising high-performance lithium–sulfur batteries 1.00
Interlayer engineering-induced charge redistribution in Bi2Te3 toward efficient Zn2+ and NH4+ storage 1.00
Silane cooperation with Ce2(SO4)3 to efficiently construct a protective layer and induce uniform deposition of Zn2+ for an ultra-stable Zn anode 1.00
An amine electrolyte additive with claw structure promoting the stability of a Zn anode in aqueous batteries 1.00
Boosting Ru atomic efficiency of LaFe0.97Ru0.03O3via knowledge-driven synthesis design 0.35
Ultra-low concentration ether electrolytes with strong Coulomb interactions for high-voltage lithium metal batteries 1.00
889 839.76
Shape-stable MOFs-Based Composite Phase Change Materials for Enhanced Thermal Management in Li-Ion Batteries 1.00
Dynamic Gas Scheduling Method for Efficiency Optimization of Gas–Steam–Power Energy Conversion Equipment and Systems in Steel Plants 1.00
Development and Operational Optimization of a Centralized-Heating Return-Water-Source Heat Pump for Personalized Heating System 1.00
Evaluating Energy Loss and Internal Flow Structures Using Entropy Production Theory: A Case Study of the Lateral Inlet/Outlet of Pumped Storage Power Stations 1.00
An Integrated Radial Basis Function Neural Network and Electrochemical Modeling Framework for Proton Exchange Membrane Fuel Cells 1.00
Mechanism and Mitigation of Temperature Nonuniformity in CO2 Direct-Cooled Battery Packs during Fast Charging by Evaporating Pressure Matching 0.83
Effects of boron equivalent ratio on plume multispectral radiation intensity and temperature in the solid rocket scramjet with steam reforming 1.00
Experimental studies on hydrogen production from methanol steam reforming under wide liquid feed rates 1.00
Experimental and numerical investigation on the multi-physics field coupling characteristics of bubble swarms and supercritical LNG in a submerged combustion vaporizer 1.00
Thermal buffering via phase change distributors for jet disturbance suppression in packed bed thermal energy storage 1.00
A Transferable Deep Learning Framework for Cross-Chemistry and Cross-Scale State of Health Estimation in Lithium-Ion Batteries 0.67
Machine Learning-Based Multi-Objective Optimization of NH3/H2 Combustion under H2O/N2 Dilution with Consideration of Flame Instability 1.00
Prospective environmental and resource sustainability assessment of advanced matching technologies for sodium-ion and lithium-ion batteries 1.00
Oriented gradient design of fluid-coupled graphite-based phase change composites for rapid and uniform latent heat storage 1.00
Experimental investigation and performance analysis of a packed-bed thermal energy storage system for oilfield produced fluid heating 1.00
Theoretical analysis of a low dew point desiccant dehumidification system with temperature and pressure swing adsorption 1.00
Fouling deposition and its impact on heat transfer performance in the helical coil once-through steam generator 1.00
Multi-objective dispatching optimization of district heating systems based on thermal energy quality coefficients 1.00
Thermal runaway behaviour of lithium-ion batteries in branched tunnels: Influence of cathode chemistry and charge/discharge rate 0.83
A cost-effective dual-mode PCM with a sandwich structure for year-round building energy conservation 1.00
Fast prediction and optimization of oxy-fuel combustion in a MW-scale circulating fluidized bed: an integrated CFD and machine learning approach 1.00
Perturbation design for supercritical CO2 heat transfer with Helmholtz oscillators: Shifting the paradigm from geometry to dynamics 1.00
Interannual thermal behavior of multilayer soil surrounding subway stations across climate zones under multiple periodic thermal boundaries 1.00
Two phase flow instability of a natural circulation system with a narrow rectangular channel in floating nuclear power plants under rolling conditions 1.00
Thermodynamic, economic, and exergo-carbon footprint evaluation of the biomass-to-X system based on different operating modes 1.00
Technical optimization and energy analysis of an advanced ammonia-based CO2 capture process for coal-fired power plants 1.00
Integrated biomass power with CCS and green hydrogen to methanol: A comprehensive thermodynamic, economic analysis and strategic assessment for China 1.00
Numerical analysis of liquid ammonia direct injection strategy optimization for improving efficiency and emissions in hydrogen engines 1.00
Study on a solar driven dual-channel MOFs ventilated wall for continuous indoor 24-h air dehumidification 1.00
Influence of pilot-stage swirl direction on spray and near-LBO combustion in a centrally staged aero-engine combustor 1.00
Performance Investigation of SrCl2/Al2O3 Composite for Thermal Energy Storage: Numerical Modelling and Experimental Study 0.71
Energy Efficiency and Flexibility in Space Heating: Thermal Energy Storage Integration Strategies in Heat Pump Systems 0.25
Numerical investigation of ammonia flame quenching in pre-chamber engines 1.00
Failure mechanisms and multi-scale response characteristics of lithium-ion batteries under dynamic three-point bending 1.00
Investigation on load cycling flexibility and safety considering dry-to-wet state conversion of an ultra-supercritical power unit under deep peak shaving conditions 1.00
Study of a Simplified Heat Transfer Model for the Ventilated Roof Desiccant Bed 1.00
Thermo-electrical Performance and Heat Transfer Mechanisms of an Immersion Battery Thermal Management System Based on Synthetic Ester Fluid 1.00
Investigation and prediction of finned liquid-cooled battery thermal management system for electric vehicles: A machine learning approach 1.00
Study on in-cylinder combustion energy distribution and emissions formation characteristics of a low-carbon methanol/diesel RCCI engine 1.00
Separation Process Electrification and Site-Wide Integration for Energy and Carbon Efficiency in Sulfuric Acid Alkylation 1.00
Combustion and emission characteristics in a swirling-flow single trapped vortex combustor: Fuel staging effect 0.70
Multi-objective optimisation, exergy analysis and process intensification of side-stream extractive distillation processes 1.00
Experimental and numerical study on combustion characteristics of diesel spray in premixed ammonia/air mixtures using a constant-volume combustion vessel 1.00
Synergistic enhancement and stabilization of thermoelectric generator (TEG) performance using finned metal foam–PCM composites 0.14
Mass and Heat Transport Characteristics of Full-Scale Open-Cathode Air-Cooled PEMFC Stacks: Comprehensive Morphology Analysis of Flow Field Aspect Ratio and Channel Configurations 1.00
Assessing the potential and cost of hydrogen metallurgy for decarbonizing China's iron and steel industry: An integrated TIMES and marginal abatement cost analysis 1.00
Transition from Conventional Industrial Parks to Zero-Carbon Parks: A Feasibility Study on Low-Temperature Retrofit of Existing Heating Systems 1.00
Low-NOx approach for ammonia cracked gas micro-mixing type combustion using rich–lean staging 1.00
Performance analysis of integrating solar energy with low-grade waste heat recovery for decarbonising industrial heating 1.00
Design optimization and LSTM-based prediction of phase change release process in graded metal foam tank: role of eccentric active rotation 1.00
Cascading Valorization of Walnut Shells via Supercritical CO2: Phenolic Bio-oil Extraction and Syngas/Char Co-production 1.00
Experimental Study on the Application of Stack Voltage Distribution Fluctuations in Operational Monitoring and Fault Diagnosis: Analyzing the Effects of Stack Degradation on Monitoring Accuracy and Validating It in an 80 kW Fuel Cell Stack 1.00
Co-pyrolysis of Biomass and Plastics with Biochar as Catalyst for Production of Aliphatic Hydrocarbons 0.84
Design and optimization of a hybrid heat pipe–liquid cold plate battery thermal management system for electric vehicles 1.00
Topology optimization for accelerating thermal charging in TPMS-based latent heat storage units: A rapid method for determining porosity distribution 1.00
Hydropyrolysis vapor upgrading reaction pathways of guaiacyl phenolic compounds: Hydrogen transfer mechanisms 1.00
Real-time backpressure optimization for direct air-cooled units driven by digital twin technology and adversarial reinforcement learning 1.00
The impact of non-stiff fuel injection on the acoustic response of a partially premixed hydrogen flame 1.00
A Transfer Function Method for Thermal Transient Modeling in District Heating Networks: Optimizing Accuracy and Computational Efficiency 1.00
Comparative Analysis of Combustion and Emissions Performance of Partially Cracked Ammonia (H2/N2/NH3) and NH3/H2 Flames in a Model Gas Turbine Combustor 0.57
Preparation and evaluation of the metal-carbon-based composite phase change materials based on deep eutectic solvents with high photo-thermal conversion efficiency for building energy saving 1.00
Physics-informed machine learning method for lithium-ion batteries state of health estimation using simulated voltage data 1.00
Study of natural gas engine thermal efficiency improvement with a novel residual-gas cavity pre-chamber jet ignition under lean-burn conditions 0.71
Near field flow dynamic and heat transfer characteristics of curved ceiling jet from tunnel fires under reduced pressures 1.00
Full-Scale Experimental Study on Combustion, Emissions, and Operational Performance of a 660 MW Utility Boiler across a Wide-load Range 1.00
Delineation of Critical Mass Flux and Thermal Equilibrium Quality: Heat Transfer Disparity in Helically Coiled Tubes of Different Orientations under Gravity/Centrifugal Force Dominance 1.00
Experimental and numerical study of a cascaded thermal energy storage system for waste heat recovery in hydrogen production plants 1.00
The preparation of TPA monomer through the pathway of waste PET steam pyrolysis using high H/C ratio gas as external hydrogen donors 1.00
Dual-functional waste-derived geopolymer scaffold for low-supercooling shape-stabilised phase change materials in energy-efficient building envelopes 1.00
Effects of lean burn, oxygen enrichment, and hydrogen enrichment on an ammonia engine 1.00
A synergistic mechanism: In-situ constructed Ag/Cu bimetallic sandwich structure organic electrode for dual-ion batteries 1.00
Enhancing the deep peak shaving performance of coal-fired power plants: A novel control strategy based on energy supply-demand deviation of heating surfaces 1.00
Applicability of radiative cooling for grain storage across global food trade regions based on the köppen climate classification 1.00
Study on the multi-field coupling evolution law of coal spontaneous combustion–methane coupled hazards in the goaf of ultra-long working faces 1.00
Multi-physics field study of CO low-temperature catalytic reactor based on CFD-GNN approach 1.00
Thermal runaway inhibition and propagation blocking in 18650 cylindrical lithium-ion battery under controlled oxygen environments 1.00
Experimental and numerical investigation of standalone PCM-based cooling for data centers 0.75
The effect of sidewall on horizontal diffusion jet flame behavior under sub-atmospheric pressures 0.88
External characteristic characterization and internal dynamic simulation analysis of abrupt power changes in self-humidifying fuel cells 1.00
Integration of hydrogen-based iron and steel manufacturing routes: comprehensive comparative analysis and optimization based on systemic perspective 1.00
Numerical Simulation of Throughput Enhancement in Natural Gas Pipelines via Direct LNG Injection 1.00
A novel uncertainty-inclusive SOH estimation model for lithium-ion batteries based on KMCGAN 1.00
Determination of charging current for lithium plating boundary based on dynamic single-frequency impedance 1.00
Modeling rapid expansion of superheated liquids in energy storage infrastructure: pressure impulse and mechanical consequences 1.00
Piston motion path optimization of crankless two-stroke engines based on a virtual crank-connecting rod mechanism 1.00
Topology Directed Cu-MOF Cathode Composite with Interconnected Ion Channels for Fast and Stable Zn2+ Storage 1.00
In-Situ Data-Driven High-Precision SOC Estimation for Silicon-Based Lithium-Ion Batteries 1.00
Knowledge-guided Intelligent decoupling control for PEMFC air supply based on end-to-end dynamic modeling 1.00
Quantifying early warning feasibility for battery safety failures: a dimensionless analysis of multi-signal dynamics 1.00
Operation optimization of district heating systems considering dynamic thermal characteristics and passive heat storage 1.00
Study on the Exergy Efficiency and Hydrogen Production Rate in Biomass Gasification Process Based on Pilot-Scale 1.00
Performance Analysis of Solar Graded Heat Storage–Assisted Dual–Source Heat Pump System 1.00
Research on the Mechanism and Energy Efficiency of Deep Peak Shaving in Power Station Boilers 0.83
A model predictive control method for system-wide optimization of district heating systems 1.00
Effect of external cylindrical obstacles on the structure and overpressure characteristics of spontaneously ignited hydrogen jet flames 1.00
Experimental investigation of a vehicle-scale immersion cooling battery thermal management system for high-energy-density battery packs under cooling and heating conditions 1.00
Impact of temperature-pressure decoupling method on the performance of the dual-adsorbent bed continuous-cycle refrigeration system under desorption temperature mismatch conditions 1.00
Modeling and operation analysis of solar-driven methane dry reforming over Ni/CeO2 in a kilowatt-scale solar thermochemical reactor 1.00
Competitive analysis of scale, interface, and structure effects on thermal behavior and phase transition characteristics of chloride salt toward sustainable thermal storage 1.00
An Innovative Load Forecasting Model for Ground Source Heat Pump Systems Integrating Mechanistic Constraints and CNN-ATT-LSTM Framework 1.00
Experimental and numerical insights into quantifying temperature and heterogeneity impacts on lithium-ion battery performance: From cell to pack 1.00
Investigation of combustion chamber geometry on mixture formation and combustion characteristics in a heavy-duty direct-injection hydrogen engine 1.00
Machine-learning based multi-field reconstruction and performance assessment of alkaline water electrolyzers 0.83
Antibiotic residues derived carbonaceous materials for transfer hydrogenation of bio-based furfural: experiments, kinetics and techno-economic analysis 1.00
Alkali/acid treatment of willow tree leaves to improve gasification performance for syngas production 0.90
Source-transport-sink integration framework for collaborative energy-carbon optimization in the steel sintering process 1.00
Tuning lignin fast pyrolysis with CO2: PCA-guided synchronized fabrication of phenol-rich bio-oil and porous biochar 1.00
Distributed Thermal Storage for Mitigating Heat Supply-Demand Imbalance in District Heating Systems: A Thermohydraulic Analysis 1.00
Frequency domain dynamic analysis method for steam network and leakage diagnosis 1.00
A novel dynamic temperature reset strategy for enhancing flexibility of district heating systems under supply-demand mismatch state 1.00
Experimental and numerical investigation on composite fins with different volumetric ratios in a shell-and-tube solar latent heat thermal energy storage device 1.00
A mechanistic wall heat flux partitioning model for the CRUD-affected surface flow boiling under PWR conditions 1.00
All-solid-state batteries for the grid: A realistic appraisal of challenges and opportunities 1.00
An efficient hybrid power generation system by integrating the biomass-fueled gas turbine with existing coal-fired power plants 1.00
A high-fuel tolerance SOFC-GT-SE hybrid power generation system considering the impact of carbon deposition: techno-economic analysis and multi-objective optimization 1.00
Source-free unsupervised cross-condition capacity prediction of lithium-ion batteries based on adversarial differences and temporal consistency 1.00
Performance Improvement of Level-of-Hydrogen Estimation for a Metal Hydride-Based Hydrogen Storage System 1.00
Experimental and semi-empirical study on the radiative characteristics of inclined hydrogen-blended natural gas jet flames 0.94
Dynamic Characteristics and Flexible Control of the Coal-Fired Power Plant Integrated with Molten Salt Thermal Storage System 1.00
Indoor thermal environment and energy performance of radiant floor heating system coupled with pipe-embedded external wall utilizing low-grade heat 1.00
A holistic dynamic model for liquid hydrogen transfer process 1.00
Improving the long-term sustainability of photovoltaic thermal - ground source heat pump system by soil thermal balance regulation 1.00
Next-generation LNG regasification: Natural draft ambient air vaporizer with buoyancy-driven convection for enhanced performance and reduced cost/footprint 1.00
Humidity-triggered autothermal regulation of lithium-ion batteries via liquid metal-PCM composites for enhanced cold-environment performance 1.00
Exploring novel phase change temperature and humidity control materials lauric acid/expanded vermiculite/MIL-100(Fe)-based for synchronous controlling indoor temperature and humidity 1.00
An improved soft sensing method for measuring the liquid amount inside cylinders of ionic compressors based on pressure reconstruction 1.00
Prediction model for the initial dryout vapor quality in helically coiled tubes 0.93
Physics-informed Virtual Sensor Design for Inter-Turbine Temperature in Turbofan Engines under Component Degradation 1.00
Systematic screening of numerous salt hydrates for passive adsorptive PV cooling/water harvesting system 0.33
Heat transfer characteristics of the fin-tube three-fluid heat exchanger in cold warehouse with cold storage 1.00
Dynamic characteristics of compressed air energy storage system embedded with abandoned oil well storage: A numerical approach 1.00
Low−temperature thermal management of lithium battery module with pulsating heat pipes: addressing the temperature uniformity in heating 1.00
Dual role of silicon in potassium-induced ash deposition: Low-Temperature mitigation and high-temperature aggravation mechanisms 1.00
Reliability assessment and optimization for large-scale natural draft wet cooling system in nuclear power plants 1.00
Full-scale experimental study on external explosion dynamics induced by liquefied petroleum gas explosion in residential environment 1.00
Unified 3E Modeling and Capacity Planning for Micro-Energy Systems 0.69
Quantification the Expansion Behavior and Deformation Dynamic Variation of Lithium-Ion Batteries During Thermal Runaway 1.00
Acceleration mechanism of the thermal runaway propagation in an enclosed LIB cluster and the fire disadvantage of liquid immersion 0.88
High value utilization of residual biochar from sorption-enhanced hydrogen-rich syngas production: CO2 conversion, supercapacitors and catalytic supports 1.00
Pilot-scale investigation and simulation-based optimization of MDEA/PZ for Post-combustion CO2 capture 0.86
Potassium Fixation and Ash Fusion Behavior in Biomass and Sewage Sludge Co-gasification 1.00
Numerical study on dispersed fuel injection strategies for thermal performance enhancement in a self-flue-recirculating radiant tube 1.00
Investigation on effects of PCM phase change on thermo-mechanical behaviours of phase change energy pipe pile 1.00
Investigations on the lateral bearing performance of field-scale screw piles influenced by heating 1.00
Investigation on the flow and heat transfer of supercritical CO2 in a semicircular channel under cooling conditions 1.00
Thermal management performance enhancement of cylindrical power battery modules via cooling strips with reflux microchannel structure 1.00
Heat transfer performance study of gypsum boards integrated with carbon nanotubes-hydrated salts phase change materials: An experimental and numerical study 1.00
An Improved Particle Swarm Optimization-Adaptive Square Root Unscented Kalman Filter Algorithm for Accurate State of Charge Estimation of Lithium-ion Batteries 0.83
Effect of trigger cell position on thermal runaway propagation in lithium-ion battery modules within branched tunnels 0.83
Study on the formation mechanism and pressure oscillation characteristic of condensation-induced water hammer in the residual heat removal system under ocean heaving motion 1.00
Gradient-based identification of hydraulic resistance for optimal pump control in meshed district heating network 0.86
Synergistic optimization of H2 active pre-chamber jet ignition and in-cylinder mixture reactivity for large-bore NH3-H2 engines performance 0.67
Effective temperature control of a battery thermal management system with a backup thermoelectric cooling source 1.00
Effect of Multi-Stage Ammonia Injection Strategy on Combustion Performance and Emission Characteristics of Ammonia/Hydrogen Rotary Engine 0.83
Mechanistic Study on Hydrotreating of N/S-Heterocyclic Compounds in Waste Tire Oil: Insights from Benzothiazole and D-Limonene 1.00
Enhancing hydrogen production from methane steam reforming using a palladium-based membrane reactor inserted with triple-helix structure 1.00
An integrated system for simultaneous heating and dehumidification in dynamic tobacco drying using data center waste heat 1.00
Fault diagnosis, fault identification, and fault-tolerant control strategy for inverted U-tube steam generators with valve faults and disturbances 1.00
Cellularization and intrinsic instability of ammonia cracked gas flame: synergistic effect by CH3OH/CO2 blending 1.00
Energy-economic-environmental analysis and multi-objective optimization of district heating and cooling system with long-term and short-term thermal storage 1.00
A physics-informed deep learning framework for remaining useful life prediction of lithium-ion batteries with feature subset construction 1.00
Thermal contribution-driven energy matching for internal heating regeneration in microchannel-corrugated fin regenerators under extreme hot-humid climate 1.00
Harnessing sewage heat energy: turbulence control via an optimized conical insert for energy-efficient hydrocyclone operation 1.00
Investigation of the combustion characteristics and knock phenomenon of diesel-ignited premixed ammonia under cracked ammonia atmosphere 1.00
Internal Short-Circuit Diagnosis for Lithium-ion Batteries Using Autoencoder with Temporal Convolutional Network and Self-attention Mechanism 0.67
Ensuring limited-supply compliance through a standby hydraulic design Method for looped district heating networks 1.00
Numerical investigation on the heat transfer characteristics and dynamic adaptability of cascaded phase change material (PCM) heat sinks under flight conditions 1.00
Experimental study on the preparation of fast-response calcium chloride composite heat storage materials for efficient thermal management 1.00
Combustion and emission characteristics of stratified premixed and diffusion modes in direct-injection ammonia-hydrogen SI engines 1.00
State of Charge Estimation for Lithium-Ion Batteries via a Diffusion-Enhanced Equivalent Circuit Model and an Improved Extended Kalman Filter 1.00
Optimizing Intake Flow for Enhanced Lean Burn in a Methanol-Fueled SI Engine: An Experimental and Numerical Study 1.00
Improved superhydrophobic surface for new phase-change thermal diode in building thermal management 1.00
Simulation and Experimental Verification of an Adjustable Ejector for Inter-building Hydraulic Balance in Secondary Heating Networks 1.00
Multiscale physics-informed modeling and hybrid intelligent control of urban district heating networks 1.00
Large-scale Long-distance Data Center Waste Heat District Heating System: Exergy Analysis, System Performance, and Application 1.00
Structural and Thermal Regulation of Strain Behavior in Batteries Under Air and Immersion Cooling 1.00
Ignition and fire behaviors of typical insulation materials with the flame spreading electrical wire at the side-confined wall conditions 1.00
Comprehensively assessing the effect of gas humidification on proton-conducting solid oxide fuel cells via theoretical modeling 1.00
Design, performance assessment, and machine learning-driven optimization of a novel low-carbon urban waste-to-x polygeneration system: multi-scenario analysis of hydrogen and methane production 0.13
Quantitative analysis of inconsistent dynamics evolution within commercial fuel cell stacks under flooding and membrane drying faults 1.00
Highly efficient solid desiccant heat pump based on dual cooling sources enabled by super hygroscopic polymer 1.00
Study on the Application of Ultrasonic Atomization Technology in Ammonia-Water Distillation Process and Its Influence Law on Performance Improvement of Refrigeration System 1.00
Design and optimization of large-scale thermochemical heat storage reactor and its application in integrated energy system 1.00
Study on the explosion behavior of hydrogen storage tank in fire scenarios 1.00
In-depth understanding synergistic characteristics of heat-fluid-mass transport in packed bed with large-size hierarchically porous heat storage module: in-situ experiments and numerical simulations 0.86
Effects of biodiesel saturation on combustion and emission characteristics in an ammonia/biodiesel dual-fuel engine 1.00
Phosphoric Acid-Catalyzed Staged Pyrolysis of Poplar Wood for Co-Production of H2-Rich Syngas and Carbon Materials 1.00
Modeling, quantification and enhancement methodology for energy storage in load-concentrated district heating systems 1.00
Planning Distributed Energy Systems with Low-grade Heat Sources Integration: Geography-Based Clustering and Risk-Informed Thermal Pipeline Layout Design Approaches 0.60
Effect of Antioxidant Tetraethylenepentamine on Pyrolysis, Oxidation, and Emission Behavior of Jatropha Biodiesel 1.00
A Sparse SOH Estimation Framework Based on Clustered Voltage Segments and Multi-head CNN under Arbitrary Charging Condition 1.00
State of Health Estimation of Lithium-ion Batteries Using Variational-Diffusion Generative Model and Attention-Enhanced Hybrid Temporal Network 1.00
Investigation of performance enhancement in solar non-imaging concentrators with congruent surfaces coupled with heat pipe-evacuated tube absorbers 1.00
Numerical Investigation on Synergistic Enhancement of SOFC Performance via Multi-Channel Flow Field and Interconnect Co-optimization 1.00
Transforming bamboo waste via an assembled pyrolysis system: high-quality charcoal as an enabling precursor for catalyst supports and activated carbons 1.00
Hydraulic optimization of residential district heating system using IPOPT algorithm: From component validation to performance evaluation 1.00
Shape-Stabilized Imidazole-Based Ionic Liquid Sorbents for High-Performance Thermal Management 0.92
Effect of intake valve timing on the hydrogen oval rotary engine with different combustion chamber geometries 0.60
Cost-Effectiveness of Reversible and Conventional Solid Oxide Electrolyzers in Electricity-Hydrogen Integrated Energy Replenishment Systems: A Case Study from China 0.80
Thermal allocation strategy for building complexes based on Distributed Model Predictive Control: Application to a solar district heating system 1.00
Comparative analysis of condensation characteristics in diesel and liquid ammonia sprays under high-pressure direct injection conditions 1.00
Hierarchical MPC for Residual-Available-Energy Balancing in Topology-Reconfigurable Modular Battery Systems 1.00
A Multiphysics Study on Venting Safety in Battery Energy Storage Systems: From Cell Venting to Energy Storage Station Explosion Hazards 1.00
A Micro/Meso-level Multiphysics Simulation Method for the Evolution Behavior of LNG Storage Tanks under Cryogenic Leakage 0.67
Separation of product gas in supercritical CO2 enhanced coalbed methane systems: Design, Simulation, and Performance validation of Laval nozzle 1.00
Optical and Numerical Investigation of Global Equivalence Ratio Effects on Combustion and Flame Propagation in Active Pre-chamber Methanol Turbulent Jets 1.00
Thermal runaway characteristics of pre-overcharged LiFePO4 batteries: a comparative study under overcharging and overheating conditions 1.00
Source Domain Selection with Early-Cycle Features for Transfer Learning-Based Prediction of Lithium-Ion Battery Degradation Trajectories 1.00
COSBY: Clustering-guided online sequential BYOL-based transfer learning framework for Lithium-ion battery capacity prediction 1.00
A two-stage deep learning method for predicting turbine vane temperature fields under active cooling air flow modulation 1.00
Perforated-tube modular reactor enabling high thermal efficiency and low flow resistance in thermochemical energy storage 0.71
Effect of low pressure on thermal runaway behavior of lithium-ion batteries induced by internal short circuit with optical diagnostics 1.00
Macro-Coating and Micro-Impregnation Enabled Hydrated Salt Composites for Battery Thermal Safety Systems 1.00
Numerical study on header effect of superheater's distribution headers when a circulating fluidized bed boiler operating at wide loads 1.00
A variable PBC low temperature preheating strategy fully exploiting heat generation characteristics of lithium-ion batteries 1.00
Optimization of natural gas combustion characteristics and motion characteristics in an industrial-scale alumina roaster 1.00
Nuclear power plant multi-grade waste heat-enhanced salinity-gradient osmotic energy conversion under reverse temperature gradients 1.00
Self-adaptive photovoltaic power generation under day-night large temperature differences enabled by phase change brine gels with high latent heat and high thermal conductivity 1.00
Flash boiling spray comparison at fixed superheat index: independent control of fuel temperature and ambient pressure 0.86
The Hydrogen-Enhanced Combustion Mechanism Underlying the High Pressure Rise Rate in an Ammonia-Diesel Dual-Fuel Engine 1.00
Multi-stage MOF desiccant wheel for stepwise dehumidification and low temperature regeneration 1.00
Light-guide PCM plate—a novel heating technology and its conceptual verification 0.88
Insight into combustion characteristic of a multi-point injection hydrogen engine from the view of hydrogen injection pulse width 1.00
Molecular dynamics insights into hydrogen production by biomass supercritical water gasification: A free radical reaction perspective 0.50
Optimizing Design of Heat Exchangers based on Targeted Control of Local Thermal Resistance Ratio 1.00
Mechanistic entrainment model of vertical steam-water annular flow based on disturbance wave force analysis 1.00
Preparation of cold-storage Microencapsulated Phase Change Suspension: dispersion stability and thermal conductivity performance improvement 1.00
Autothermal Aspen modelling for bubbling fluidized bed integrating heat loss prediction: biomass gasification performance analysis, optimization, and system efficient design 1.00
Enhanced heat integration of energy systems via a heuristic algorithm with damping 1.00
Biomass to green methanol via anaerobic digestion-gasification coupling process: A comprehensive investigation 1.00
An experimental study on the behavior and thermal properties of dual jet flames from an underground pipeline rupture in a pit 1.00
Adaptive hybrid model-based and data-driven control for air-cooled proton exchange membrane fuel cells temperature regulation 0.58
Optimization on Control Strategy for CO2-Based Dual-Cooling Thermal Management System in Electric Vehicles 1.00
Adaptability of subregional film cooling under subsonic off-design conditions 1.00
Evaporation Prediction Method for Long-Term Storage of Large Liquid Hydrogen Tanks Incorporating Para- and Ortho-Hydrogen Conversion Heat Effects 1.00
TPMS-based PCM capsules for thermal management in compact electronic systems: Design and evaluation 1.00
Data-driven based ignition strategy optimization for hydrogen rotary engines 1.00
Carbon-Based film-assisted low-temperature heating for LFP batteries: Evaluating short-term performance and long-term degradation 1.00
A framework integrating multi-physic and data-driven models and optimization approaches to maximize electrical efficiency and power of PEMFC 0.67
Hydration State Measurement in Polymer Electrolyte Fuel Cells from Correlated Neutron Imaging and Single-Point Impedance 0.28
Image-based anisotropic modeling of paraffin melting process for thermal energy storage 1.00
Long-term field test and performance assessment of a novel deep borehole heat exchanger array system coupled with solar thermal storage in severely cold regions 0.71
Modeling and analysis of scaling effects and multiphysics uniformity in hundred-kilowatt-class multi-stack module of reversible solid oxide cell 1.00
Geothermal energy extraction via energy tunnel technology for cooling storage in phase change energy storage structures: Energy performance analysis 1.00
In-situ construction of impurity-free defective graphene nanosheets as high-performance lithium-ion battery anodes 1.00
Physical informed neural network for SOH estimation of lithium-ion battery with electrochemical mechanism 1.00
Mechanism of CO2-regulated pyrolysis behavior and thermal stability enhancement of zeotropic R1243zf mixture for organic rankine cycle 1.00
On the liquid layer formation and thermodynamic behavior of liquid oxygen during interface reorientation: A combined drop tower experiment and simulation study 1.00
Numerical simulation of solar-driven biomass pyrolysis for structured biochar production 1.00
A novel methanol and electricity cogeneration system based on coal and biomass complementary gasification technology: Comprehensive analysis of thermodynamic, carbon emission, and economic performance 1.00
Optimization capacity configurations and operational regulation methods of the heat source with passive heat storage in district heating systems 1.00
Study on the laws of coupled heat, mass transfer and chemical reactions in a segmented methanol steam reformer for engine thermochemical recuperation 1.00
Experimental study on the effect of high humidity on the heat storage of phase change plate under forced convection 1.00
Multi-objective optimization of thermal performance of the cascaded latent heat storage system for backfill body based on RSM and NSGA-II 1.00
Optimization and Performance Verification of a Radial Double-Layer Porous Media Burner: Integrated Numerical-Experimental Approach 1.00
A new thermal characteristics analysis method of district heating systems based on hydraulic operational parameters pre-identification 1.00
Thermodynamic Model for Self-Actuated Electrocaloric Cooling Thermal Management 1.00
Enhanced electrical and mechanical performance by a novel interconnector design for solid oxide fuel cell stacks 1.00
Experimental investigation on the thermal performance of a pilot-scale single-tank high-temperature molten salt sensible thermal energy storage system 1.00
Capacitive deionization desalination by electricity localization 1.00
Multi-scenario life cycle assessment of post-combustion carbon capture in China's coal-fired power plant 1.00
Study on the effects of Al-contained kerosene on RBCC performance and heat release at low Mach number 1.00
Stable power generation from fluctuating cold energy enabled by PCM-packed bed 1.00
Experimental analysis of main/auxiliary spark plug interactions in a direct-injection aviation H2ICE with redundancy-compliant ignition design 1.00
Innovating thermochemical energy storage: thermal performance enhancement of cascade reactor with rotating water spray 0.67
Dynamic prediction of NOx generation concentration based on Kolmogorov–Arnold Network integrated deep learning method for a 660 MW coal-fired boiler 1.00
A novel multi-indicator VSBM-boiler model: Assessing the economic-thermodynamic performance of utility boilers 1.00
Enhancing rotor temperature field prediction for steam turbines using EC-SSC-DNN: A structural-symmetry-constrained deep learning framework 1.00
SOH prediction for lithium batteries using WPT and crested porcupine deep extreme learning machine under different temperatures 1.00
Energy-efficient recovery of tetrahydrofuran/n-butanol via pressure-swing and heterogeneous azeotropic distillation: Design, optimization, and comprehensive performance evaluation 1.00
Improved harmonic loss – History gated unit recycling for online state of charge and state of energy co-estimation of lithium-ion batteries for large-scale energy storage stations 0.67
Study of the relationship between solid phase transformation and flow behavior transitions driven by carbothermal reaction in slag of BGL gasification 1.00
A vehicle-cloud collaborative framework for state of health estimation of lithium-ion batteries via multi-feature fusion and hybrid data-driven–empirical modeling 1.00
Combustion and emissions performance of high-compression-ratio methanol pre-chamber Engines: Effect of pre-chamber jet hole configurations 1.00
Hybrid end-to-end battery modeling and SOH estimation via physics-data fusion and maximum mean discrepancy minimization 1.00
Thermal runaway boundary recognition and early detection of lithium battery based on machine vision algorithm 1.00
Optimization of open-circuit voltage curve acquisition and state estimation for aging lithium-ion batteries 1.00
Design and Optimization of Thermal Management System for Cylindrical Battery Pack Combining Liquid Cooling with Phase Change Materials Based on Nondominated Sorting Genetic Algorithm 1.00
Explosion dynamics and safety implications of hydrogen–air mixtures in complex underground structures 1.00
Experimental study on leakage characteristics of large-scale CO2 pipelines containing CH4 and CO impurities 1.00
Convergence analysis of carbon emission efficiency in China's iron and steel industry: A journey toward sustainable development 1.00
Data-augmented SOH estimation for lithium-ion batteries under small-sample conditions: A hybrid STL-transformer-TimesNet approach 1.00
Analysis of thermal-flow-stress performance of parabolic trough direct steam generation collectors under reflector installation deviations 1.00
Temperature-dependent safety behavior of LiFePO4 pouch cells under mechanically induced localized short circuits 1.00
Synergistic effects of biomass-plastic co-pyrolysis: Enhanced performance with microwave assistance and biomass type variability 0.70
Multi-objective optimization for carbon footprint reduction of a novel pressure-swing distillation process integrating heat pump and solar energy for methyl tert-butyl ether/methanol separation 1.00
Study on the transient thermal response of annular borehole heat exchangers array under cyclic operation of cooling and heating 1.00
One-dimensional steady/dynamic simulation modeling method for cylindrical supercritical CO2 boilers based on the imaginary surface model of radiation heat transfer in furnace 1.00
Toward Low-Carbon Shipping: Techno-Economic Optimization of an Integrated Marine Biofuel–Hydrogen System Using Supercritical Rapeseed Biorefinery 1.00
Towards reliable and interpretable NOx emission prediction: A knowledge and data driven model for coal-fired boilers with spatiotemporal feature integration 1.00
Effects of the structure and primary air on the gas/particle flow, combustion and NOx emission characteristics of the swirl burner in a 350-MW supercritical Zhundong coal-fired boiler 1.00
Life cycle carbon footprint and water footprint analysis of solar energy to ethylene glycol 1.00
Modeling and Porosity Configuration for Enhanced Metal Foam and Cryogenic Phase Change Material Composite Performance 1.00
Propagation and evolution graph method embedded with physical constraints for multi-factor coupled deep fault diagnosis in aero-engines 0.50
An innovative accounting framework for CO2 emissions in the power sector: based on the energy flow relationship between the power and heat sectors 1.00
Techno-economic and life cycle assessment of liquid biofuels obtained from municipal sewage sludge by hydrothermal liquefaction (HTL) 0.58
Design and hierarchical control strategy of a solar SMR–hydrogen metallurgy system for direct reduced iron production 1.00
Solid waste-based multifunctional material preparation and analysis of carbon sequestration-thermal storage-photothermal 1.00
Estimation of groundwater flow rates based on the thermal-hydro response of energy pile: A multi-stage inversion framework with optimisation algorithm 1.00
Design and Evaluation of Closed-loop Carbon Recycling Strategies based on Co-electrolysis for On-site Reusing CO2 in the Blast Furnace Gas 0.95
Study on the reaction mechanism of nitrogen migration in pressurized oxy-fuel combustion 1.00
Towards understanding the effect of sub-atmospheric pressure on flame height, gas-phase temperature and radiation characteristics of turbulent diffusion flames in high-altitude areas 0.86
Synergistic integration of Kolmogorov-Arnold networks with RNN for enhanced lithium-ion battery state-of-health estimation with optimized feature extraction 1.00
Thermal energy release analyses of direct absorption/storage solar collector based on the photo-thermal conversion composite PCM for heat pump evaporator heat source 1.00
Effects of sidewall restriction on the diffusion flame behaviors and maximum excess temperature characteristics of rectangular burner in bifurcated tunnels 1.00
Research on the heating, electrical, and cooling operation performance and economy of the PVT heat pump soil cross-seasonal energy storage system 1.00
Towards High-Efficiency and Clean Ammonia/Diesel Dual-Fuel Direct Injection Engines via Intelligent Charge Compression Ignition (ICCI) Mode 1.00
Robust State-of-charge estimation for lithium-Ion batteries: A high-order lumped disturbance compensation approach with a simple tuning strategy 1.00
Enhanced thermal performance of energy piles based on composite phase change material and random aggregate modelling 1.00
Plasma-assisted intake reforming for ammonia jet ignition engine: Combustion characteristics and mechanistic insights 1.00
Analysis of load adaptability and dynamic thermal response in mid-deep geothermal heat pumps with various compressor types: An on-site measurement study 1.00
Numerical investigation and response surface optimization on heat storage/release performance of porous phase change storage device 1.00
Performances of eutectic phase change composites containing CNTs/GO/PVA oriented aerogels coated with EP/CNTs/CFR for Li-ion batteries thermal management in wide temperature range 0.86
Research on the determination method of stable combustion boundaries for aviation two-stroke engines based on inter-cylinder differences 1.00
A hybrid deep learning model for lithium-ion battery state-of-health estimation using electrochemical impedance spectroscopy 1.00
A combustion strategy for multi-emission control via secondary ammonia injection in a swirl combustor 1.00
Thermo-economic investigation on a novel zeotropic Carnot battery using cascaded phase change material for thermal energy storage 1.00
Numerical study on the energy conversion of diesel-methanol partially premixed combustion in dual-fuel at DI diesel engine 0.75
Improved particle swarm - untracked particle filtering for accurate battery energy state estimation with the influence of multi-parameter varying temperature constraints in Inner Mongolia power station 0.67
Achieving controllable and repetitive ignition in solid propellants: Combustion performance and trade-offs of a LP/AP/PVA system 1.00
Preparation and properties of nano-composite gel foam for preventing spontaneous combustion of residual coal in mined-out areas 1.00
Analysis of low-temperature thermoelectric behavior of lithium-ion battery module based on a thermal–electrical model with fractional order 1.00
Regeneration performance evaluation of multi-stage drawer type solid desiccant packed bed under hot air combined with microwave conditions 0.83
Synergistic co-catalysis by seawater salts and CO2 for degradation of marine microplastics in hydrothermal gasification: Mechanism and modeling based on ReaxFF molecular dynamics 0.80
Investigation of optimized temporal convolutional network based on GKSO algorithm for lithium battery state of charge estimation 1.00
Numerical investigation of the effects of typical cylinder shapes with turbulent jet ignition on the combustion performance of methanol-fueled rotary engine 0.89
Investigation on heat transfer behavior of particles flowing around side wall tube for sustainable development 1.00
Performance analysis and optimal operation of PCM-backfilled energy pile for cold energy storage: A field test study 1.00
Scaffold-Infiltrated Self-Assembled Cathodes for Intermediate-Low-Temperature Protonic Ceramic Fuel Cells 1.00
A novel PCM-heat pipe composite trombe wall for summer thermal performance optimization 1.00
Experimental study on activation, combustion behavior and NOx emissions of large-grained coal in a purification-combustion system 1.00
A Hybrid and Efficient Architecture for Enhanced Battery Capacity Degradation Prediction with Zero-Shot Generalization 1.00
Analyzing sensitivities of kinetics, thermodynamics, and transport parameters in HMX (1,3,5,7- tetranitro-1,3,5,7-tetrazocane) combustion modeling 0.45
Exergy and entransy analyses of H2O/LiBr absorption heat storage with different heat exchange modes 1.00
LLM-MSIformer: A Method for Lithium-Ion Battery State of Health Estimation Based on a Large Language Model and Multi-Time Scale Interval Transformer 1.00
Fast Pyrolysis-Derived Fe-N Co-Doped Biochar for Phenol Adsorption: Insights into Mechanisms from Experimental and Modeling Study 1.00
Energy-Efficient Cooling in Tropical Climates: Integrating Desiccant Wheels with Novel Dew-Point Evaporative Cooler Designs 0.83
Multi-objective Topology Optimization of Liquid-cooled Plate Structures for Enhanced Thermal Management in Power Batteries 1.00
Performance analysis and optimized design of hybrid battery thermal management system integrating leak-free PCM with liquid cooling under extreme temperature conditions 1.00
Design of a Modular Heat Storage for Heat Commodification: Optimal Aspect Ratio of a Laterally heated PCM Enclosure 0.10
Two-dimensional gas chromatography for molecular-scale analysis: Examining the effects of alternative fuel components on nvPM emissions from general aviation piston engines 1.00
Experimental study of discharge performance of pumped thermal energy storage system based on organic Rankine cycle 1.00
Combustion Machine Learning of Superheated Butanol Atomization in Optical GDI Engine 0.63
Multi-step prediction of battery state of health based on self-supervised pre-training and transfer learning using the xPatch model 0.80
Cross-domain battery SOH and RUL estimation via Domain-Adaptive Transformer 1.00
Health Evaluation for In-Service Electric Vehicle Battery Pack with Recursive Gaussian Process 0.67
Electrochemical degradation of defective lithium-ion batteries under mechanical vibration 1.00
Experimental Study on Combustion and Emission Characteristics of a Pure Ammonia Engine with Spark Ignition 1.00
A Cross-Material Lithium-Ion Battery State of Health Estimation Method Based on Three-Stage Domain Adaptation 1.00
Integration of low-temperature desalination with geothermal heating for heat-water cogeneration 0.71
Comparative assessment of mixture formation and combustion characteristics of a hydrogen/n-butanol rotary engine with various rotor recess designs 1.00
Influence of a spiral guide vane on the flow field and particle deposition outside the vortex finder of FCC disengager cyclone separators 1.00
Bidirectional Mamba network with multi-scale feature fusion and sparse-channel mixture of experts for battery state of charge estimation 1.00
Experimental study of pre-chamber ignition with asymmetric intake valve timing for performance enhancement in a high compression ratio spark-ignition engine 0.64
Numerical study on the combustion characteristics of ethylene-assisted Al particles in the scramjet combustor with wall/strut injection schemes 1.00
A deposition–removal-informed hybrid temporal model for online fouling estimation of industrial heat exchangers under parameter variability and nonstationarity 1.00
Sustainable dimethyl ether synthesis pathway based on MSW gasification and carbon dioxide utilization 1.00
Machine learning-assisted synergetic optimization of carbon emission and thermal efficiency for a 660 MW pulverized coal-fired boiler 1.00
Performance enhancement of thermally regenerative flow battery by a novel design coupling Venturi-effect-inducing structure with nature-inspired flow distributors 0.70
Constructing slotted bluff body with adaptively-regulated rear baffles for stable dynamic combustion in micro-combustors 1.00
High-pressure pyrolysis mechanism of tar-rich coal in Taiyuan Formation, Ordos Basin 1.00
Knowledge distillation-based lightweight deformable network for remaining useful life prognostics of vehicle power battery 0.75
Dynamic modeling and analysis of a direct contact membrane distillation system with heat recovery 0.80
Effects of ignition location on gas explosion dynamics and structural damage in a full-scale residential structure 1.00
Evaluating alternative methanol fuel cell vehicles based on life cycle assessment with system dynamics 0.90
Condensation and nucleation of water vapor in H2–CO–CH4–CO2 multicomponent mixtures: molecular insight into gas–liquid separation from supercritical water gasification products 1.00
Experimental study on a novel integrated thermal management system for electric vehicles utilizing a dual-suction compressor 1.00
Multi-parameter coupling effects on cathode-particle-induced breakdown arc in lithium iron phosphate batteries 1.00
High-Efficiency Humidification and Cooling System via Rotating Sheet-Type 3D Capillary structures 1.00
Development and performance investigation of an indirect expansion solar heat pump integrated with a high-concentration conical cavity receiver for heating applications 0.75
Study on the flame structure and combustion dynamics of ammonia swirl flame assisted by gliding arc plasma 1.00
Design optimization and numerical performance assessment of a novel beam-down solar-driven biomass gasification system for hydrogen-rich syngas production 1.00
A novel performance improvement technology of wet cooling towers with the dry-wet hybrid rain zone by auxiliary fans 1.00
Integrated study on a novel central heating system with large-temperature-difference heat exchange based on heat-electricity-gas synergy 1.00
Numerical and experimental study of a high permeable MOF/PVDF flat-sheet membrane module for enhanced evaporative cooling 1.00
A hybrid physical information deep learning framework for energy consumption forecasting of forging heating furnace 1.00
Study on the correlation characteristics of auto-ignition and knocking in high compression ratio spark ignition engine for isopropanol-butanol-ethanol (IBE) blends by dilution strategies 1.00
Numerical Study of Ammonia-Hydrogen Blending Ratio and Ignition Timing on the Combustion and Emission Characteristics of a Gasoline Rotary Engine 1.00
Data-Driven SOC Estimation Method for Power Batteries Under Driving Cycle Conditions and a Wide Temperature Range 1.00
A thermodynamic model and experimental validation of internal heat exchangers for active air temperature control in lined rock cavern for compressed air energy storage 1.00
A solar-driven biomass gasifier with bimodal radiative heating: Heat transfer characteristics and operational parameter optimisation 0.82
Thermal storage performance of ground source heat pump–energy pile systems under intermittent and continuous operation in the Tibetan Plateau 0.83
Thermodynamic and economic analysis of a novel biomass-derived methanol production assisted by electrolytic H2 adjustment and O2 recirculation 1.00
Variable property effects on flow and thermal non-uniformity of a printed circuit heat exchanger 1.00
State-of-health estimation for battery packs of real-world electric vehicles with cell-to-pack transfer learning 1.00
High-pressure ammonia spray combustion in lean premixed hydrogen mixture 1.00
Joint prediction of SOH and RUL of lithium-ion batteries using single-cycle charging data 1.00
Pollutant emission characteristics of staged combustion with hydrogen-enriched methane for gas-fired boiler based on Taguchi design 1.00
Dynamic transportation model for cost targeting and integrated design of process and heat exchanger network 1.00
Hydrodynamic-combustion coupling calculation method for water-cooled wall of supercritical boiler by micro-element superposition method 1.00
Morphology-Controlled Biomass Pyrolysis for Enhanced Tar and Syngas Yields: A Lattice Boltzmann Approach 1.00
Towards next generation zero carbon heating plants integrated with solar thermal/photovoltaic system and thermal storage 0.67
Numerical research on baffle-enhanced liquid immersion cooling for thermal regulation in 280 Ah LiFePO4 batteries 1.00
Exploring the performance of the thermal management system in a FCV based on real vehicle testing under different driving conditions 1.00
Transient cooling wall temperatures of supercritical carbon dioxide boiler during load variation process 1.00
Numerical optimization and experimental study of a biomass pellet stove 1.00
Regulation of Hydrocarbon Adsorption and Diffusion in ZIF-20 through Functional Group Modification 0.70
Natural gas explosion characteristics and structural failures in typical residence under different ignition positions 1.00
Thermal runaway propagation path and fire risk assessment in electric vehicles based on full-vehicle experiments 1.00
Battery SOH assessment for real-world EVs based on discharging process characteristic and ensemble learning approach 1.00
Mechanism and application of ultrasonic cavitation in promoting physicochemical modification of coal and gas extraction 1.00
Study on optimization of ammonia-methanol reformed/ cracked gas combustion mechanism and nonlinear relationship between laminar burning velocity and NO generation 1.00
Long-term operation performance analysis and layout optimization of direct geothermal heating system using multiple deep borehole heat exchangers for natural gas preheating 1.00
Digital twin enhanced hybrid modelling for main steam temperature optimization of flexible power plant 1.00
Energy, exergy, economic, and environmental (4E) analysis of a hybrid sludge-biomass power system via integrated hydrocharization and co-gasification 1.00
Janus Ceramic Membrane with Wettability Gradient Surface for Enhanced Waste Heat Recovery in Carbon Capture Process 1.00
Dual-control strategy for selective upgrading of polyethylene waste into jet fuel-range alkanes 0.83
Operational characteristics of a novel phase change thermal storage device under rotational actuation of the annular plate heat exchanger 1.00
A combustion mechanism simplification and optimization method using two-stage deep neural networks for multiple fuels 1.00
Generation-Reduction-Burnout Strategy Empowering Ultra-Low Pollutant Emissions in Biomass Chain Grate Boilers: CFD Modeling and Industrial Experimental Validation 1.00
Optimized thermal management and safety assurance with flame-retardant phase change materials for lithium-ion batteries 1.00
A solar-driven device based on hydrogel composite sorbent for efficient atmospheric water harvesting in arid regions 1.00
Effects of methane addition on combustion characteristics of ammonia-air co-flow flames 1.00
Micro-overcharge driven nonlinear degradation mechanisms: Towards early detection of capacity knee points in lithium-ion batteries 1.00
High-Accuracy State of Health Estimation for Lithium-Ion Batteries via Current Fluctuation Analysis and Multi-Feature Fusion 0.86
Investigation into the influence of varied plasma types and treatment durations on the combustion characteristics and kinetics of pulverised coal 1.00
A novel extended Kalman filter-guided long short-term memory algorithm for power lithium-ion battery state of charge estimation at multiple temperatures 0.67
Investigation on improvement of hydrocarbon adsorption of zeolites molecular sieves for the engine emission reduction 1.00
Endwall and leading-edge film cooling of turbine blades in a hydrogen-fueled rotating detonation combustor–turbine coupled system 1.00
Nanoencapsulation of binary fatty acids for high-stability phase change materials: Synergistic synthesis and thermophysical characterization 1.00
Performance of a ground source heat pump with energy piles and borehole heat exchangers under continuous and intermittent operating modes 1.00
A novel two-level equalization topology with AMPC-IVY-FLC algorithm for enhanced lithium-ion battery pack balancing 0.83
Data driven-based health prognostics and charge estimation for lithium-ion batteries under varying discharging patterns 1.00
Thermal absorption enhancement of a flexible hydrated salts phase change film for efficient thermal dissipation of electronic devices 1.00
Reduction of the energy demand and multi-performance evaluation of the pressure-swing and extractive distillation separation of the ethanol/benzene/ cyclohexane azeotropic system 1.00
A transferable multi-state estimation framework for lithium-ion batteries based on sparse electrochemical parameters 1.00
A dual-objective data-driven framework combining Bayesian optimization and improved differential evolution for rapid and accurate parameter identification of lithium-ion battery P2D models 1.00
Case Analysis of Combustion-Side Flexibility Retrofit Schemes Based on a Framework for Technical Economy of Coal-fired Unit 1.00
Combination of covalent-organic frameworks and metal-organic frameworks to explore the overall picture of the structure-property relationship for dynamic adsorption cooling performance 1.00
Exploring life warning solution of lithium-ion batteries in real-world scenarios: TCN-transformer fusion model for battery pack SOH estimation 1.00
State of health prediction of lithium-ion batteries based on incremental capacity analysis and adaptive genetic algorithm optimized Elman neural network model 1.00
Energy analysis and efficiency optimization of a fuel cell passenger vehicle based on energy flow distribution and thermal management under various driving conditions 1.00
Research on the impact of quantitative configuration of spark plugs on combustion and emission characteristics in opposed free piston engine generators 1.00
Development and thermodynamic analysis of an efficient integrated biomass gasification semi-closed supercritical CO2 cycle with negative carbon emission 1.00
Performance evaluation of steady-state and dynamic response for innovative configurations of EV cabin and battery coupled thermal management based on transcritical CO2 cycle 1.00
Enhancing the ramp-up flexibility of the coal-fired power plant under deep peak shaving work conditions by adopting a sliding steam temperature Scheme 1.00
A Local Digital Twin Method for Fuel Injection Process of Hydrogen/Diesel High Pressure Co-direct Injection Engine 1.00
Active Control of the Thermal Stress of Thick-Walled Components in a Utility Boiler by Electric Tracing 1.00
New insights for the methanol transport properties within anode gas diffusion layer of direct methanol fuel cell 1.00
Green flame retardant new strategy: Microbial induced carbonate precipitation inhibition of coal spontaneous combustion 1.00
State-of-Charge and Capacity Estimation for MWh-Scale LiFePO4 Peak-shaving Battery Energy Storage Stations Based on Real-World Operating Data 1.00
Experimental Study on Combustion Characteristics of Volatiles and Residual Solids in Ammonia Co-Firing with Biomass Pellets 1.00
Impact of O2-enriched CO2 blending ratios on energy efficiency and carbon abatement in underground coal gasification 0.88
Fe/Co-Catalysed Graphitization of Waste Palm Kernel Shells via One-step Pyrolysis for Ultra-Stable EDLC Symmetrical Supercapacitor 0.06
Turbine Vane Endwall Heat Transfer Measurement and Coolant Migration Mechanism Considering Film Hole Geometric Deviation 0.75
Numerical analysis of carbon dioxide mineralization process in a bubbling fluidized bed 1.00
Synergistic Thermal Management Strategy of a Novel Microchannel Embedded in Electrodes with Phase Change Materials and Pulse Discharge 1.00
Design of an Advanced Packed Bed Reactor for Solar-driven Biomass Gasification 1.00
Deep domain adaptation for cross-chemistry battery SOH prediction with relaxation voltage features 1.00
Side-stream extractive distillation process with intermediate reboiler and heat integration design: from green entrainer screening to energy-saving improvement 1.00
Dual flame interaction dynamics for an upper- and a lower horizontal diffusion jet flame 0.86
Effect of phase change zone arrangement on thermal management performance of concentrating photovoltaic phase change radiator 1.00
Experimental study on jet flame behavior of hydrogen storage tank in fire scenarios 1.00
Efficient cold-starting and operation project of lithium batteries with the pulsating heat pipe enhanced by metal oxide nanofluids at low-temperatures 1.00
Effect of cross-sectional area variation and methane blending on flame-turbulence and pressure characteristics of hydrogen explosions 1.00
Assessing the Economic Feasibility of Renewable Integration in District Heating and Cooling Networks for Sustainable Urban Development 1.00
A quasi-two-dimensional model for thermodynamic performance analysis of liquid hydrogen tank insulation system integrating vapor cooled shield with adiabatic para-ortho hydrogen conversion 1.00
A comprehensive framework of synchronous SOC-SOH joint estimation for lithium-ion battery with multi-depth expert networks 1.00
Clarifying the performance enhancement mechanism of organic acid modification for Li4SiO4-based solar energy storage 1.00
How to make full use of heat storage characteristic of mid-deep borehole heat exchangers hybrid with heat pump storage systems: Field tests and simulation analysis 1.00
Numerical simulation of biodiesel co-combustion in a 350 MW coal-fired unit: Combustion performance and pollutant emissions 1.00
Feedwater control enhancement of thermal power plants with cascade Rankine cycle during peak shaving: Restrictions and control strategy optimization 1.00
Experimental and kinetic modeling of nitrogen oxide formation in ammonia/N-dodecane dual-fuel combustion 1.00
Airtightness evaluation of rubber sealing layers for compressed air energy storage cavern using the solution-diffusion model 0.75
Research on Low Emission Control Method for Ammonia and n-Decane Dual-Fuel Based Pre-Cooled High-Flow Variable Cycle Engine 0.70
SOH estimation of lithium-ion batteries with local health indicators in multi-stage fast charging protocols 0.83
Microwave co-pyrolysis of Chlorella vulgaris and cow dung with composite additives: Characteristics, bio-oil analysis and reaction mechanism 1.00
Study on high-temperature carbonate-chloride molten salt applied to supercritical CO2 concentrated solar power plant 1.00
Comprehensive performance of building systems using sensible-latent heat composite energy storage structure under all-day solar radiation conditions 0.83
An improved Kelvin-Helmholtz Rayleigh-Taylor (KH-RT) breakup model with wide fuel applicability based on data-driven techniques 1.00
Design of Pt3Ni/TiO2 octahedral alloy catalysts for the production of bio-aviation fuel via photothermal catalysis under a mild condition 0.85
Battery retirement state prediction method based on real-world data and the TabNet model 1.00
Complex causality behind low-Pt-loading cathode degradation in proton exchange membrane fuel cells 1.00
Analysis of the influence of ammonia energy ratio and injection timing on the formation of ultrafine particles in an Ammonia-Diesel Dual-Fuel (ADDF) engine 1.00
Revealing the mechanisms of ammonia dual-fuel combustion for decarbonization in marine transportation 0.67
Ultra-thin perforated unglazed solar air collector for enhanced thermal efficiency and operational performance: Experimental and numerical analysis 1.00
Improving the load ramp-up capacity and efficiency of coal-fired power plants by optimizing the pulverizing system control strategy 1.00
Efficient methanol production by combining municipal solid waste gasification, SOEC and methanolation reactor: A thermodynamic study 0.64
Optimization and numerical investigation on phase change energy storage structures with eccentric rotation using gradient metal foams 1.00
Influence of Wall Structure on Jet–Wall Interaction and Combustion in an Ammonia–Hydrogen Pre-Chamber Turbulent Jet Ignition System: A Combined Experimental and CFD Study 1.00
Mechanism-traced diagnosis of lithium inventory loss for lithium-ion batteries using physics-driven machine learning 0.67
Performance optimization of a ready-to-use micro combustion-methanol steam reforming reactor used in the hydrogen production by methanol reforming 0.70
Study and prediction of evaporation characteristics of n-heptane under turbulent conditions 1.00
A novel Rectisol process for H2S enrichment and CO2 capture: Process optimization and thermodynamic analysis 1.00
A mechanistic modeling method for limited overcharge abuse of lithium-ion batteries 1.00
A comparative study of premixed and diffusion combustion strategies in a high-speed ammonia/diesel dual-direct-injection engine 1.00
A comprehensive decarbonized generation expansion planning framework considering coal-to-gas conversion, retirement, and carbon capture retrofit 0.20
Enhanced thermal performance of a multi-module latent heat storage heat exchanger with mesh-like flow channels 1.00
Uniformly dispersed ternary nanoporous carbon-MgO-LiCl composites for medium-temperature thermochemical energy storage: Thermodynamic properties and dehydration kinetics 0.80
A ferromagnetic heterostructure nanowire enables high rate and stable lithium-sulfur battery 1.00
A systematic investigation of thermal and electrochemical behaviour of a cylindrical lithium-ion battery during charge and discharge processes 0.86
Combining CO2 capture and conversion with Ni-CaO-biochar for rice straw gasification 1.00
Online impedance-based temperature and states co-estimation for sodium-ion batteries using fractional-order model 1.00
Hydraulic–thermal dynamic model of meshed district heating network based on discrete event simulation 0.13
A Hybrid AFM-BiLSTM Model for Lithium-Ion Battery Capacity Prediction Using Fused Features 1.00
Study on the pressurization liquid hydrogen supply characteristics in hydrogen fuel cell vehicles 1.00
Experimentally Driven High-Fidelity Modeling of Pyrolysis and Char Oxidation in Timber Blocks: Integrating Biomass Conversion Gradient and Thermal Correction Models 0.69
A numerical and experimental study of the spray and combustion characteristics of a diesel and ammonia dual-fuel engine with direct injection 1.00
Multi-scenario simulation analysis of transient heat transfer in medium-deep U-shaped geothermal wells 1.00
The influence of the secondary hydrogen injection strategy on the combustion process of jet ignition ammonia-hydrogen engines 0.92
Dynamic performance prediction of multi-cell proton exchange membrane fuel cells with a hybrid machine learning method 1.00
Fault Diagnosis Method for Lithium-ion Batteries Based on Image Features and Improved Isolated Forests 1.00
Robust SOC estimation of lithium-ion battery combining gated recurrent unit and square root CKF with generalized correntropy 1.00
Design and experimental implementation of LPV-based adaptive model predictive control for air-cooled fuel cell 1.00
Thermo-mechanical behavior evolution analysis and fusion SOC estimation of cylindrical LiFePO4 batteries 1.00
Process, economics and environmental comparisons of coal-to-aromatics with different routes and technical specifications 1.00
The impact of thermal damage accumulation on thermal runaway behavior of lithium-ion batteries 1.00
Semi-physical experimental research for active control of high-frequency combustion oscillation based on dual spool fuel valve 1.00
Experimental study on the combustion and emission characteristics of a 350MW down-fired boiler under multi-source acoustic waves 1.00
Technological advancements in coal-to-liquid systems for enhanced environmental and economic benefits 1.00
Effective Transport Rate: A Novel Metric for Quantitative Evaluation of Air-Fuel Mixing in Diesel Engines 1.00
Research on the stability assessment method of bubbling fluidized bed sludge incineration system based on multi-source features 1.00
A quadrangular pyramid thermal radiation model based on flame geometry of two-dimensional diffusive spill fires under longitudinal airflow 1.00
In-Context Learning for Nano-PCM Thermal Behavior Prediction in Battery Thermal Management via Lattice Boltzmann Simulation 0.31
Multi-scenario state of charge adaptive estimation of lithium iron phosphate battery based on impedance timescale information 1.00
Photothermal Conversion-Driven Thermal Conductivity and Energy Storage Synergistic Enhancement in Hierarchical Porous N-Doped Biochar-Based Phase Change Materials 1.00
The performance analysis on a novel PV driven island dual-functional power generation and atmospheric water harvesting system 1.00
Experimental study on the ejected flame behavior and near-field flame radiation characteristics from building compartment with double openings under crosswinds 1.00
Intermittency oscillation behavior and physical model of anti-buoyancy turbulent downward flame in a jet reactor 1.00
Modeling gas thermodynamic states and jet flame behaviors of high-pressure gas cylinders in fire scenarios 1.00
Preventing supercritical CO2 boiler overtemperature: A thermal inertia ratio (Xi) criterion for predicting heat transfer deterioration in gas-like region 1.00
Flow instability of 600 MW supercritical boiler water-cooled wall under low-load in deep peak-shaving process 1.00
Remaining useful life prediction of lithium-ion batteries based on an incremental internal resistance aging model and a gated recurrent unit neural network 0.25
Exploring the CCUS potential of China's coastal areas based on a source-to-offshore sink matching model 1.00
Experimental investigation on heat transfer characteristics in the LNG intermediate fluid vaporizer 1.00
Investigations of flow structures and dynamical behaviors of steam jet condensation in crossflow based on dynamic mode decomposition and proper orthogonal decomposition 1.00
On the theoretical analysis of hydrogen-oxygen explosion limits 1.00
Parametric study of a thermoelectric-based battery thermal management system with vapor chambers for high discharge rate 1.00
Research on the effects of extracting main steam and reheat steam on enhancing the flexibility of the coal-fired power plants 1.00
Experimental optimization toward high efficiency and low emissions in an ammonia-fueled RCCI engine with various reactivity enhancements 0.71
A real-time feedback and adaptive control strategy for battery thermal management system 1.00
Battery charging curve prediction via Fourier graph neural network fused prompt features 1.00
Inlet gas flow, pressure and temperature control technology for PEMFC stack testing platforms 1.00
Zero-emission blue hydrogen using chemical scrubbing-based CO2 capture 1.00
Analysis of the impact of simulated seawater immersion on the electrochemical performance and thermal hazards of 26700 sodium-ion and lithium-ion batteries 1.00
Phase diagram analysis and thermophysical properties investigation of mixed molten salts with low liquid operating temperature for thermal energy storage 1.00
Revealing the critical impact of CO2/(CO2+CO) ratio in different gas-to-methanol processes: Plant-wide modeling and scenario analyses 0.83
An improved electrochemical-thermal coupling model for state-of-charge estimation of lithium-ion battery 1.00
Effect of staggered-arranged discontinuous anisotropic fin on thermal energy storage performance 1.00
Mechanistic-probabilistic learning fusion approach for state of health estimation in LiFePO4 batteries under high-rate discharge cycling 0.88
Depth assessment of energy storage and load response characteristics in supercritical circulating fluidized bed cogeneration units 1.00
Optical diagnostics of ignition and combustion behavior and NOx emission reduction analysis of single-particle excavated waste in MILD-oxy combustion conditions 1.00
A novel battery active equalization-based internal short circuit fault diagnosis method for lithium-ion batteries 1.00
Experimental investigation and analysis of the diffusion flames and maximum temperature characteristics of rectangular burner with weak and strong plumes in a bifurcated tunnel 1.00
Battery internal short circuit detection based on curvilinear Euclidean distance assessment and adaptive clustering method analysis in multi-factor coupling scenarios 1.00
Rapid infrared co-pyrolysis performance of corn stover and polyurethane foam waste for upgrading oil yield and quality 0.97
Energy, exergy, exergoeconomic and exergoenvironmental analyses of biomass heating systems for rural households: A case study in Northeastern China 1.00
Investigation on natural circulation boiling heat transfer characteristics in tube bundle channels under marine conditions 1.00
Numerical simulation on combustion emission of hydrogen-ammonia blended natural gas rotary engines 1.00
Enhancing variational autoencoder for estimation of lithium-ion batteries State-of-Health using impedance data 1.00
The effect of dual injection strategy on fuel distribution and combustion characteristics in ammonia/hydrogen rotary engines 0.86
Dynamic heat consumption benchmarking and carbon reduction potential mining of heating stations based on improved decision tree and association rule mining 1.00
Orthogonalization analysis of the effect of pre-combustion chamber hydrogen injection strategy on the combustion and emissions of a gasoline engine with active precombustion chamber under lean-burn condition 1.00
Impedance investigation and switching strategy study of constant-electrode unitized regenerative fuel cell from electrolytic cell through purging to fuel cell 1.00
Multi-objective optimization of energy efficiency and geomechanical safety in high-temperature aquifer thermal energy storage (HT-ATES) systems based on coupled thermo-hydro-mechanical (THM) analysis 0.17
Thermal insulation optimization of turbocharger bearing housing: A comparative study on heat shield configurations and ventilation strategies 1.00
Co-spontaneous combustion of lignite and anthracite: thermal behavior, kinetic characteristics, interaction mechanism 1.00
A numerical study of the effects of coil pipes arrangement on the thermal storage capacity of phase change energy storage tanks 1.00
Battery state of health estimation with interpretable distance feature and dynamic weight model across-chemistry and working conditions 1.00
Simulation and Optimization Research of Coupled Heating System Using Data Center Waste Heat and Solar Energy Based on Seasonal Soil Heat Storage 1.00
A combined heuristic optimization algorithm and Gaussian deconvolution procedure for the kinetics extraction of building wood panel pyrolysis 1.00
A biofuel-powered study with deep learning neural networks and Dragonfly Algorithm: Optimizing CRDi engine performance with ZnO nanoparticles and cotton seed methyl ester 0.15
Enhanced group convolutional hybrid neural network for state of charge estimation of lithium-ion batteries consider temperature uncertainty 1.00
Edge-cloud collaborative method for state of charge estimation of lithium-ion batteries by combining Kalman filter and deep learning 1.00
Experimental analysis and comprehensive performance improvement research on composite phase change materials packed bed thermal storage systems 0.80
Multi-objective Optimization of a Cascade System for 136Xe Enrichment via Microchannel Distillation 1.00
Porous structure optimization of biochar composite PCM: an experimental and molecular dynamics simulation study 1.00
Co/Zn synergistic catalysis: Carbon nanotubes wrapped N-doped porous carbon derived from MOF as electrode materials for supercapacitors 1.00
Material and Exergy-Driven Comparative Assessment of Hydrogen-Rich Fuels Injection in Blast Furnaces: Feasibility Envelope and Carbon Reduction 1.00
A physics-guided method for predicting the core temperature of lithium-ion batteries 1.00
Energy-Efficient Extractive Pressure-Swing Distillation with Integrated Preconcentration Column and Natural Decanter for Ternary Heterogeneous Mixtures 1.00
Study on Enhanced Heat Transfer Mechanism for Crossflow-Counterflow Combined Mechanical Draft Cooling Tower 1.00
Thermodynamic Optimization and Economic Analysis of a Solar-powered Membrane-based Humidification-dehumidification Desalination System in China 1.00
Reactive behaviors and mechanism of H2NG deflagration inhibited by CO2 and N2 1.00
Dynamic thermal and mechanical performances of the molten salt thermocline storage tank for charging process: A numerical simulation study 1.00
Effect of environmental temperature on thermal runaway propagation of lithium-ion battery module during charging process 1.00
Prediction of diesel cetane number based on physicochemical properties and hydrocarbon compositions using XGBoost model 1.00
Parametric studies and design recommendations for a novel hybrid battery thermal management system with ultrathin PCM layers between liquid cooling channels and batteries 0.86
Fast estimation of liquid-cooled module temperature based on electro-thermal- liquid coupling model 1.00
Investigation on Cooling Performance, Effectiveness Prediction and Optimization of Double-Wall Structure with Shaped Film Holes 1.00
Intelligent optimization of solar-driven biomass-plastic co-gasification system based on limited data mapping 1.00
Boosting Syngas Production through Catalytic Thermochemistry of Biomass Waste and Spent Lithium-ion Batteries 1.00
Biomass gasification combined with a novel heat integration design for sustainable energy supply programs: Comprehensive thermodynamic, environmental, and economic evaluations 0.40
Battery degradation trajectory early prediction with degradation recognition and physics-guided under different charging strategies 1.00
Optimized co-combustion of hydrochar and coal via dual-lance injection for enhanced blast furnace performance 1.00
Numerical investigation of ammonia-diesel dual-fuel engine based on ammonia thermal cracking for hydrogen to reduce unburned ammonia and GHG 1.00
Recondensation behavior modeling in a liquid methane-oxygen common bulkhead tank by a modified level set method 1.00
State of charge estimation of LiFePO4 batteries based on a transferable force-electric dual-observation model 1.00
Experimental study of heat transfer performance in a novel stacked granule flow heat exchanger: Strengthening mechanism based on multi-parameter coupling 1.00
Field experimental study of a novel overfeed photovoltaic-thermal heat pump for residential heating in northern China 1.00
A design method for insulation distribution to achieve year-round energy-efficient operation of double-layer pipe-embedded wall 1.00
Bionic Vascular Fin Latent Heat System Synergistically Enhances Heat Transfer: Parameter Optimization and Prediction of pulsating Flow and Nanofluid Based on Machine Learning 1.00
Further study on the Correlations between Biochar Combustion Reactivity and Physiochemical Structure at Microscale by Combining Petrography and Raman Spectroscopy 1.00
AI-assisted digital twin modeling technology for lithium-ion batteries 1.00
Investigation of rice straw gasification in a two-stage fluidized bed gasifier 1.00
Interventions in lignite oxidation: Microbial effects on reactivity and stability 1.00
Lithium-ion battery SOH prediction based on multi-dimensional features and multi-model feature selector 1.00
Experimental and numerical investigation on heating performance comparison of air conditioning heating systems based on water-phase change material heat storage system and water heat storage system 1.00
Experimental investigation of the vertical helical borehole heat exchanger (VHBHE) wrapped with shape-stabilized phase change material 1.00
Battery pack SOE update strategy for cloud-edge collaborative applications based on inconsistency assessment 1.00
Study on the adsorption mechanism and staged inerting method of coal low-temperature oxidation gas under CO2-N2: Experiment and simulation 1.00
Catalytic pyrolysis of microalgae using nitrogen-rich algae-based modified biochar for monocyclic aromatic hydrocarbon production 0.89
Comparative visualization of jet-wall interaction in zero-carbon ammonia-hydrogen pre-chamber turbulent jet ignition: Effects of pre-chamber parameters and hydrogen enrichment 1.00
Analysis and optimization of the performance of a solar PV/T system integrated with seasonal latent heat storage for decarbonized heating and hot water supply 1.00
Thermomechanical response characteristics of full-scale prestressed high-strength concrete energy pile under the flexible constraint of cushion layer 1.00
Modelica based modelling and control design of counter-flow SOFC system considering temperature distribution 0.75
Co-hydrothermal carbonization of tobacco stems assisted by activated carbon from coal-gasification fine slag: Efficient wastewater purification and enhanced combustion performance of co-hydrochar 1.00
Fusion of stress and electrical signals for high-accuracy joint estimation of SOC and SOH in lithium-ion batteries 1.00
Transient multi-field catalytic mechanism of derived CO in deep energy extraction and optimization of synergistic conversion efficiency 1.00
Thermal management requirements in battery packs: An analysis of the effects of battery degradation 1.00
Study on hydrodynamic characteristics of a subcritical CFB boiler with natural circulation at low loads 1.00
Numerical investigation and comparative analysis on heat transfer characteristics of organic phase change materials (OPCMs) and liquid metals (LMs) under flight acceleration conditions 1.00
Fabrication, machine learning modeling, and operational sensitivity analysis of a Maisotsenko cycle-based water-cooling tower 1.00
Modelling of cells’ capacity distribution and fading for lithium-ion battery pack during the charge and discharge cycles 1.00
Novel Process for Producing Levulinic Acid, Electricity, and Heat from Municipal Solid Waste and Agricultural Waste: Performance Analysis and Optimization 1.00
Heat transfer and performance analysis of phase change thermal control system under variable gravity conditions 0.80
Cell-level online electrochemical impedance spectrum measurement towards advanced management for large-capacity commercial lithium iron phosphate batteries on energy storage: an engineering practice 1.00
Development of a robust data-driven surrogate model to improve energy flexibility of an integrated district heating system with a thermal storage system 0.17
Study on the flame propagation characteristics of coal-rock mixed dust explosion in semi-coal-rock roadway 1.00
Simultaneous Estimation of SOC and Capacity for Lithium-ion Battery Packs Throughout Full Lifespan Based on Migration Modeling 1.00
Rapid Energy Management Strategy for Multi-Lithium Battery Systems Considering Synergistic Balancing of SOC and SOH under Time-Delay Environments 1.00
Dynamic modeling and characteristic analysis of dry/wet state transition process for supercritical thermal power unit 1.00
Aloe vera-inspired boron nitride/expanded graphite/melamine phosphate polymer composites for battery temperature management 1.00
Joint prediction of SOH and RUL for Lithium-ion batteries by an enhanced Transformer model with physical information constraints 1.00
A Parallel LTCN-PHA Network for Remaining Useful Life Prediction of Lithium-Ion Batteries 1.00
Thermal optimization of PCM-based storage systems using L-shaped fins: A numerical and RSM-based approach 0.67
Effect of particle breakage on heat and mass transfer characteristics of packed bed at low Reynolds numbers: Pore-scale simulation 1.00
Synergistic regulation of thermal effect-solution recirculation on liquid desiccant air dehumidification in extreme hot-humid climates. 1.00
Experimental study on negative valve overlap condition and Miller cycle on combustion characteristics of ammonia-alcohol dual-fuel ignition engine 1.00
Hybrid ESC-LSTM-BiGRU deep learning model for multi-state estimation of lithium-ion batteries 1.00
Microwave catalytic co-pyrolysis of Chlorella vulgaris and polystyrene: Characteristics, pyrolysis oil component and mechanism analysis 1.00
Early Lifetime Prediction of Lithium-ion Batteries based on Classical Image Encoding Methods 1.00
State of health prediction of lithium-ion batteries for driving conditions based on full parameter domain sparrow search algorithm and dual-module bidirectional gated recurrent unit 1.00
Effects of spark ignition chamber arrangement on combustion characteristics in a hydrogen rotary engine 1.00
Experimental study on alternating current heating strategy for lithium-ion batteries based on lithium precipitation-overvoltage dual safety constraints 1.00
Intelligent air flow control in municipal solid waste incineration power plants: a novel approach integrating machine learning and physical-chemical models 1.00
The inhibition of CO2 twin-fluid water mist with modified inorganic salt on LPG explosion: Experimental tests and simulations 1.00
Physics-informed hierarchical perception modulation network for lithium-ion battery health management 0.83
A multi-stage augmentative generalization learning prediction model for lithium-ion battery remaining useful life under uncertain working conditions 0.86
Frequency transition in thermoacoustic oscillations of a lean premixed swirl burner 1.00
Real-world cross-battery state of charge prediction in electric vehicles with machine learning: Data quality analysis, data repair and training data reconstruction 1.00
Experimental and numerical insights into the narrow-throat pre-chamber design criterion and the ignition mechanism 1.00
Multi-fault diagnosis for Lithium-Ion batteries under diverse operating conditions based on multi-source domain generalization 1.00
A battery SOH estimation method based on PI-TFT-iDOA driven Li-Battery discharge state features 1.00
A Data-Driven Methodology for Early-Stage Estimation and Second-Life Applicability Assessment toward Lifecycle Refined Management of Power Batteries 0.71
Mechanistic Insights into Copper Slag as a Thermal Carrier and Catalyst in Lignite Steam Gasification: Experimental and DFT Study 1.00
Cross-scale modeling-driven multi-state estimation framework for lithium-ion batteries with integrated distributed thermal sensing 1.00
A multidimensional anomaly detection framework for battery capacity degradation in electric vehicles using real-world data 0.81
Fuel Octane Number Measurement Method based on High-Frequency Combustion Pressure and Its Application to Fuel Octane over 100 1.00
A novel burners arrangement of an entrained-flow gasifier studied by experimental and simulation methods 1.00
Thermal decomposition characteristics and kinetic analysis of biomasses and their blends: A comparative study using various models 0.50
Effect of bed material on agglomeration of bed particles in CFB burning pellets from Arundo Donax 0.88
Tubeless shape-stabilized phase change materials channels for all-climate battery thermal management 1.00
Experimental investigation on the thermal-hydraulic performance of serrated fins and novel serrated-perforated fins for PFHEs in cryogenic helium systems 1.00
Catalytic pyrolysis of low-density polyethylene to produce sustainable aviation fuel fractions: Improving isomerized alkane selectivity via magnetic metal-modified HY zeolites 1.00
Comprehensive investigation of co-pyrolysis of rubber seed oil and industrial hemp stems: thermogravimetric analysis based on artificial neural networks; synergistic effect and pyrolysis product 1.00
SOH estimation method for lithium-ion battery packs under real-world operating conditions based on a new attenuated model without additional experiments 1.00
Investigations on thermo-mechanical coupling behaviours of energy pile group under groundwater seepage 1.00
Pyrolysis of waste tires in fluidized bed reactor: Pyrolysis characteristics and hazardous elements transformation 1.00
Uncovering strategies for quantifying thermo-kinetics, reaction heat, and synergistic rates of heat transfer-degradation in the chemical upcycling of polyolefins 1.00
Combustion characteristics of gases released from thermal runaway batteries under methane atmosphere 1.00
Electrolyte-rock interactions in salt cavern flow batteries 1.00
Lithium-ion battery SOC estimation under data loss and update stagnation 1.00
Optimization of a swirl burner with universal low-load stable combustion technology: Investigating flow characteristics, combustion performance, and fuel adaptability 1.00
Electromagnetically induced in situ catalytic methanol steam reforming for hydrogen production 1.00
Effects of particle size distribution on calcium-looping energy storage characteristics and thermochemical behaviors in fluidized reactor 1.00
State of charge estimation method for lithium-ion battery based on informer model combining time domain and frequency domain attention 1.00
Experimental and simulation investigation on the hydrocarbon adsorption performance of the transition metal ion-modified zeolite during cold start process of automotive engine 1.00
A high-efficiency immersion cooling system with integrated flow distribution plates for vehicle-scale high-energy-density battery modules 1.00
Investigation on ignition chamber performance in a methanol-fueled TJI-HPDI engine: Synergy of nozzle structure, swirl ratio, and spray angle 1.00
Broadening the ignition boundary and enhancing combustion efficiency in a ramjet combustor with a plasma-type flameholder 1.00
Effect of pre-chamber volume and hydrogen energy ratio on the performance of direct injection ammonia-hydrogen engine 1.00
Lead-cooled fast reactor core outlet temperature oscillation characteristics and structural thermal fatigue analysis 1.00
Inlet temperature impact on combustion instability in a centrally staged combustor 1.00
Dynamic evolution of melting particle deposition and overall cooling effectiveness on a film-cooled flat plate 1.00
Design and thermal insulation simulation of nano-SiO2 foam concrete and vacuum insulation panel system for building exterior wall insulation 1.00
In-situ characterization of temperature distributions in planar solid oxide fuel cells for various operation conditions 1.00
Catalytic pyrolysis of biomass using desulfurization ash: Enhanced bio-oil yields and reaction pathway modulation 1.00
Sustainable methanol production processes from coal and biomass: Low CO2 emissions and high efficiency 1.00
Dynamic-static composite immersion cooling for improving thermal equalization behavior in lithium-ion battery packs 1.00
A NOx emission concentration prediction method for CFB unit based on one-dimensional semi-empirical model corrected by GRU network 1.00
Suppression thermal runaway propagation of LiFePO4 batteries during nail penetration test based on liquid immersion cooling 1.00
An improved Transformer incorporating fuzzy information entropy and average input strategy for SOC estimation of lithium-ion battery 1.00
Performance of cascaded packed bed thermal energy storage with size-gradient phase change material capsules 1.00
Configuration optimization of a novel multi-energy coupled low temperature district heating system based on distributed absorption and compression heat pumps 1.00
Kinetic and thermodynamic insights into the catalytic pyrolysis of PP with Fe/Ni catalysts 1.00
A novel tandem pyrolysis-catalytic upgrading strategy for plastic waste to high-value products with zeolite and red mud 1.00
Experimental study on a direct steam generation unit of high temperature air source heat pump 1.00
DGAT: Dynamic Graph Attention-Transformer network for battery state of health multi-step prediction 0.38
Effect of heterogeneity of organic solid wastes on gasification behavior and efficiency 1.00
Polyalcohols for flexible thermal energy storage: Understanding persistent supercooling from Gibbs free energy 0.80
Comprehensive analysis of the preparation of waste frying oil biodiesel and its application characteristics in diesel engines based on recycling economic structure in South Korea 0.25
Multi-criteria techno-economic and environmental optimization of PVT-assisted CO2 heat pump system for sustainable energy buildings in cold climates 0.29
Enhanced few-shot state-of-health estimation for lithium-ion batteries via Masked Autoencoder 1.00
The selective removal of HCN by Fe2O3 in reforming of syngas from wet sludge pyrolysis 1.00
Microwave-Assisted Catalytic Pyrolysis of Polyethylene for Hydrogen Production: Mechanistic Investigation by ReaxFF MD Simulation and Experiment Validation 1.00
Anti-disturbance nonlinear control for wide-load operation of ultra-supercritical units using high-order sliding mode observer 1.00
Optimization of the overall thermal performance in gradient-packed bed receivers 1.00
A two-step quantitative diagnosis method for battery internal short circuit faults 1.00
Combustion and flame propagation characteristics of toluene reference fuel in an optical GDI engine 1.00
Optimizing cyclic performance of latent heat energy storage systems: A comprehensive analysis of eccentricity and novel longitudinal fin geometries in shell-and-tube systems 0.75
Carbon Emission Accounting and Responsibility Allocation for District Heating in Northern China: A Baseline Value Approach 1.00
Particle-scale numerical investigation of oxy-fuel combustion in a circulating fluidized bed 1.00
Improved back-propagation neural network-multi-information gain optimization Kalman filter method for high-precision estimation of state-of-energy in lithium-ion batteries 0.86
Effects of low temperature on energy distribution and powertrain transients in hydrogen fuel cell heavy-duty trucks: an experimental study 1.00
Economic and Flexible Operation of Solvent-based Carbon Capture System with Solvent Storage Based on Absorption-Desorption Decentralized Predictive Control 1.00
A novel hybrid framework for SOC estimation using PatchMixer-LSTM and adaptive UKF 1.00
Study on Gas–Water–Solid Three-Phase Flow Characteristics and Critical Sand Transport Model in Gas Wells 1.00
Sustainable production of high-density and low-freezing-point jet fuel via catalytic conversion of lignocellulose-derived furfuryl alcohol and acetone 1.00
Few-shot state-of-health prediction for lithium-ion batteries with LSTM network 1.00
Coupling analysis of the flow and heat transfer in 1 kW-scale T-SIS-SOFC stack: numerical simulation and experiment study 1.00
Microwave discharge catalyzed CH4-CO2 reforming by bifunctional catalyst of Fe-Ni loaded on graphitized bio-char 1.00
Effect of vent burst pressure on the external overpressure behaviors and flame transients of vented petroleum fuel-air mixture explosion: A small-scale study 1.00
Analytical method for calculating variation and transition state duration of subsurface soil temperature under thermal disturbance conditions 1.00
Meta-analysis of torrefaction performance indicators for biochar energy optimization 0.50
Experimental and Predictive Analysis of Performance, Emission, and Combustion of a Heavy-Duty HCNG fueled Spark-Ignition Engine by Optimized Support Vector Machine 1.00
Machine learning-driven combustion pressure reconstruction and prediction for free-piston linear generators using kinematic parameters 1.00
A novel spatio-temporal feature fusion attention model for lithium-ion battery capacity estimation using graph convolutional network 1.00
Thermal runaway characteristics of lithium-ion batteries in a branched tunnel: Impact of longitudinal ventilation and cell state of charge 0.83
Pyrolysis mechanisms of low-GWP working fluid R1243zf in ORC systems: An experimental and simulation study 1.00
Reaction mechanism development of the methane-acetylene rich-combustion for the hydrogen production efficiency enhancement based on molecular dynamics simulation 1.00
Performance Characteristics of a High-speed Four-stroke Engine with Ammonia Direct Injection and Diesel Pilot Ignition 1.00
Rapid battery pack state of health estimation for electric vehicles considering polarization features in multi-stage charging 0.89
Life extension of lithium-ion batteries using bidirectional pulse current: Focusing on frequency 1.00
Modelling and evaluation of a high-temperature integrated CO2 capture and conversion system via SrO-based biomass sorption-enhanced gasification coupling with methane reforming 1.00
Crushing safety prediction of a battery pack system by fusion of multiple methods 0.86
Temperature-dependent multi-physical modeling strategy and safety optimization of lithium-ion battery under mechanical abuses 1.00
Membrane absorption of separating supercritical carbon dioxide and vapor in geothermal energy utilization based on lattice Boltzmann modeling 1.00
A novel framework for Adsorption Thermodynamics: Combining standardized methodology with machine learning-based text classification 0.20
Simulation of waste tire pyrolysis in a multi-chamber fluidized bed by coupling CFD-DEM with a particle shrinkage model 1.00
Mechanistic insights into alkali metal migration and slagging behavior in K-type biomass ash during thermal conversion 1.00
Multi-loop feedback proportional–integral observer for both estimation of state-of-charge and state-of-health 1.00
Pyrolysis behavior of Sabina chinensis leaves: kinetic and thermodynamic analysis based on TG-FTIR and BP neural network 1.00
Influence of ash composition on slag properties and network structure in coal gasification fine slag: A high-temperature melting perspective 1.00
Investigation of magnesium dust explosion: Particle morphology effects on dispersion, ignition, and suppression 0.56
Disposal of bamboo-based plastic substitute waste: A case study on co-pyrolysis and co-combustion of bamboo and polylactic acid 1.00
Energy and techno-economic analysis of aviation fuel production via biomass gasification, olefins synthesis and oligomerization 0.86
Catalytic enhancement of MOF-derived Fe@C catalysts in microwave-assisted co-pyrolysis: synergistic integration with bamboo-based pyrolytic char and microwave carbonization 0.94
Co-simulation of thermal behavior in liquid hydrogen tanks under vacuum degradation 1.00
Battery passport collaborative development strategy: A cooperative-stochastic evolutionary game analysis 1.00
Numerical investigation of coupling approaches and dimpled structure on melting characteristics in PCM capsule packed-bed 1.00
Effects of wall heat loss on the flame shape and preheat layer dynamics in a premixed swirling flame under varying turbulence intensities 1.00
Novel hybrid thermal management system for cylindrical lithium-ion battery based on CPCM and topology-optimized liquid cooling 1.00
A digital twin of coal-fired boiler for physical fields prediction using flow-field-informed POD-XGBoost reduced-order modeling 1.00
Water-wall tube temperature prediction model for supercritical coal-fired boiler based on improved stochastic configuration network 1.00
Battery Connection Fault Diagnosis Method Based on Enhanced Voltage Entropy and Real Vehicle Data 0.92
Emerging ternary eutectic hydrated salt cold energy storage materials for cold chain transportation 1.00
Enhancing bioenergy Efficiency: Microwave-Assisted Co-pyrolysis of plastic and sludge waste with catalytic upgrading 0.19
Interpretable deep learning with uncertainty quantification for lithium-ion battery SOH estimation 1.00
Synergy Strategy of Heat Preservation and Preheating for Lithium-ion Battery Pack Operation under Low Temperature 1.00
Thermodynamic, kinetics, and physicochemical properties of carbon-containing pyrite under air roasting conditions 1.00
Anode inlet liquid water accumulation diagnosis for fuel cells with ejector-based hydrogen recirculation 1.00
Impact of Hygrothermal Aging on Gas Release Behavior and Multi-Stage Pyrolysis Kinetics of Biomass: Insights from TG-FTIR and DAEM Analysis 0.50
Adaptive sliding mode observer for automotive PEMFC membrane water content estimation under hybrid dynamic tests 1.00
State of charge estimation for lithium-ion battery using a multi-feature Mamba network and UKF under mixed operating conditions 1.00
Saturated vapor pressure regulation mechanism of liquid desiccant material: to achieve air deep dehumidification 1.00
Numerical insight into characteristics and performance of Zinc-Bromine redox flow battery 1.00
Equation-oriented thermodynamic optimisation of heat pump integration in industrial heat recovery systems: A system-level pathway to cost and emission reduction 0.38
Classification method for coal spontaneous combustion tendency based on excess oxidation reaction rate model 1.00
Numerical analysis on temperature distribution and heat loss in the large-scale molten salt storage tank of CSP plant 1.00
Multi-physics data and model feature fusion for lithium-ion battery capacity estimation by transformer-based deep learning 1.00
Boosting Low-temperature Thermal Management Performance and Mechanical Property of Biomass Brine Gels by Host-Guest Mutual Promotion Mechanism towards Efficient Cold Energy Utilization in Biomedical Cold Chain 1.00
State of health estimation of lithium-ion batteries based on BKA-FSVR algorithm with feature reconstruction from partial constant current charging interval 1.00
Thermal management of solid oxide electrolysis cell under dynamic electrothermal self-balancing strategy 0.71
Hydrogen Production from Wet MSW Entrained Flow Gasification Based on Drying and Torrefaction Pretreatment: Modeling and Techno-Economic Study 0.75
Sustainable aviation fuel blends in aircraft piston engine: Comparative analysis of 30 % vs. 50 % SAF on combustion performance and emission reduction 1.00
Analysis of pore size control and application of ceramic membrane based on particle sintering method 1.00
Robust SOC estimation for lithium-ion batteries: Combination of GRU and FOMIAUKF approach with an improved state transition matrix 1.00
Heat-stored calcined clay limestone cement: Role of microencapsulated n-octadecane with calcium carbonate shell 1.00
Study on the synergistic inhibitory mechanism of inhibitor ions and their hydration layers on oxygen-containing functional groups in coal 1.00
Vehicle-cloud collaboration method enables accurate battery state of health estimation under real-world driving conditions 1.00
A data-driven framework for lithium-ion batteries safety assessment integrating health degradation and key thermal safety parameters 1.00
A multi-source domain transfer learning method based on ensemble learning model for lithium-ion batteries SOC estimation in small sample real vehicle data 1.00
Towards general and efficient fault diagnosis: A novel framework for multi-fault cross-domain diagnosis of lithium-ion batteries in real-world scenarios 1.00
Effect of unilateral opening blockage ratio variation on bidirectional explosion characteristics of CH4/Air/CO2 1.00
An innovative method for enhancing the combustion and emission performance of a zero-carbon fuel Wankel rotary engine with high ammonia to hydrogen ratio and stoichiometric ratio conditions 1.00
Optimization of sludge-derived fuel formulation based on co-combustion behaviors and artificial neural network modeling, with economic assessment 1.00
Online state-of-charge estimation for lithium-ion batteries via a high-degree-of-freedom robust observer with model parameter identification 1.00
Investigation of burning rate and flame length of wall-attached energy storage pool fires with different aspect ratios below different ceiling heights 1.00
Co-Combustion Performance Study of Sewage Sludge and Rice Straw Based on M-DAEM 1.00
Hydrogen-based synthetic fuel production from excavated waste: life cycle techno-environmental-economic choices of technical routes and targeted products 1.00
Development of a reduced multi-component combustion mechanism for a ammonia /diesel dual fuel engine by cross-reaction analysis 1.00
A novel SOH estimation method of sodium-ion batteries based on multi-channel threshold residual network 1.00
Microscopic and Macroscopic Analysis on Steam Heat Transfer Due to Dual-interface Resistance From Non-condensable Gases 1.00
Study on thermal runaway characteristics of lithium batteries under high-rate charge/discharge and development of a deep learning-based early warning model 1.00
Study on the heat transfer characteristics of turbine vanes under active modulation of gas turbine cooling air flow 1.00
Green hydrodeoxygenation of biomass pyrolysis oil into cycloalkanes using Ni-Mo nanoparticles supported H-mesoporous beta catalysts 1.00
A flexible operation scheme for ultra-supercritical unit under wide load variations based on improved EADRC and modified northern goshawk optimizer 1.00
Study on the explosion dynamics of locally premixed NH3/H2 blended zero carbon fuel in semi-confined elongated space: Effects of equivalent ratio and blended ratio 1.00
Thermo-mechanical coupling performance analysis of phase change material and nanofluid synergized high-efficiency energy piles for shallow geothermal energy utilization 1.00
Energy consumption analysis and parameter optimization of CO2 desorption in a structured packaged column 1.00
Critical thresholds of pre-oxidation in coal spontaneous combustion: microstructural drivers and kinetic implications 1.00
Experimental investigation on the effects of water flow rates and wind speeds on the temperature and performance of PEM electrolyzer stacks 1.00
Adaptive transfer learning for household return water temperature prediction based on domain discrepancy metric 1.00
Mechanism of heat transfer suppression and safety evaluation of high-performance aerogel insulation materials in the thermal runaway propagation of lithium-ion batteries 1.00
Design and thermodynamic analysis of hydrogenation of CO2 to methanol based on renewable energy and gas cogeneration system 1.00
Emission reduction in DI-DAI mode: Research on control strategy of diesel/ammonia dual fuel engine 1.00
Experimental study on effects of injection strategies on improving thermal efficiency and reducing emissions by coal-to-liquid/ammonia dual-fuel engine 1.00
Enhancing methane cracking through variable-frequency microwave heating: Improved energy efficiency and carbon nanotube formation 0.70
Eccentric elliptical cone groove anode design for SOFCs: trade-offs between the cell’s power density increment and the imposed thermal gradients 0.83
Revealing thermal runaway characteristics of ultrahigh-power lithium-ion battery by a multi-stage recognition modeling method 1.00
Liquid level expansion in steam drum during transient operation of molten-salt-steam-generator-system 1.00
Multidimensional signal evolution during nail-penetration-induced thermal runaway in lithium-ion batteries with different states of charge: An optical investigation 1.00
Study on carbon emission reduction optimization of gas-steam-power system for an integrated iron and steel mill considering ultimate energy efficiency 1.00
Large Eddy Simulation Study on the Effects of Swirl Number on Dynamic Combustion Characteristics of Stratified Methane Swirling Flame 1.00
Techno-economic analysis of coal-fired with green ammonia co-firing power system devoted to lower carbon emission 1.00
Research on voltage inconsistency diagnosis of power battery based on PSO-VMD-improved local outlier factor 1.00
Investigation of ash deposition characteristics on rough membrane wall surface coupled with impact-detachment mechanisms 1.00
Electrochemical-mechanical understanding of the accelerated degradation of lithium-ion batteries caused by mechanical stress 1.00
Highly accurate and fast power tracking for integrated SOFC-MGT CCHP system using wide-dynamic-range models and MPC framework 1.00
Study on the thermal-mechanical performance of supercritical carbon dioxide cooling in horizontal tube under ocean rolling condition 1.00
Characteristics of reactive biomass combustion by the optimization of central activating substance with efficient thermal recycling 1.00
High-value activated carbons preparation from Enteromorpha prolifera and their electrochemical assessment 1.00
Characterizing the effect of H2O dilution on the combustion and emission characteristics of NH3/H2 mixtures in laminar flame and HCCI engine 1.00
Effects of injection parameters on the combustion characteristics of ammonia-diesel dual-fuel direct-injection (ADDI) mode and combustion enhancement at high ammonia energy ratio 1.00
Enhancing cross-temperature state-of-charge estimation accuracy for lithium-ion batteries using multi-physics features and physical guidance 1.00
Real-time prediction of flammable volume ratio in the coming hydrogen tunnels: A hybrid CFD-machine learning framework for leakage safety management 1.00
Analysis of the degradation mechanism of high-power PEM fuel cells: end-plate effect due to hydrogen recirculation structure 1.00
Investigation of a novel lithium battery thermal management strategy by using thermoelectric technology 0.86
State of Health Estimation for Lithium-ion Batteries Based on Short-term and Global Dependency Information 1.00
Cooling performance enhancement and economic analysis of air conditioner systems integrated with phase change materials for telecommunication base station 0.80
An optimal flow rate design method for medium-deep coaxial borehole heat exchangers 1.00
Impact of sub-atmospheric pressure on fire hazard and flow field characteristics in arced channel fires: ceiling temperature, flame extension and prediction models 1.00
Selective hydrogenolysis of furfuryl alcohol to 1,2-pentanediol on CuZrAl catalysts: New insights into the Zr introduction 1.00
Numerical investigation of flue gas recirculation impacts on coal combustion and raw meal decomposition in an oxy-fuel cement precalciner 1.00
Pore-fracture and seepage characteristics of coal during low-temperature oxidation 1.00
Switchable multicyclic adsorption-based atmospheric water harvesting with solar and radiative sky cooling thermal concentration and heat pumps 0.50
A novel gas turbine performance prediction model incorporating the residual connection and feature engineering methods 1.00
A Generic physics-informed neural network framework for lithium-ion batteries state of health estimation 1.00
Robust model predictive control of condensate throttling in an ultra-supercritical plant for frequency supports of power systems with high renewable share 0.33
Study on self-pressurization liquid hydrogen tank with multi-layer insulation considering effect of thermodynamic vent system integrated with vapor-cooled shield based on transient-state modeling 1.00
Degradation mechanism of sodium-ion batteries and state of health estimation via electrochemical impedance spectroscopy under temperature disturbances 1.00
Enhanced quantile regression long short-term memory hybrid neural network for the state of charge point and interval estimation of lithium-ion batteries 0.67
Multi-objective Optimization Research on the Achievement Path of Dual Carbon Goals in Mining Enterprises 1.00
Cascade co-optimization of the load ramp-down capability considering the transient stored energy of subcritical CFB power units 1.00
Effects of cross wind and ullage height on the burning rate of medium-scale pool fires 0.80
Enhancing the future adaptability of boiler systems using multi-input extremum seeking control algorithms 1.00
Robust and Optimal Control of Free Piston Linear Generator by Variable Piston Trajectory Tracking throughout Entire Operating Process 1.00
Lithium-ion Battery State-of-Health Estimation Based on TVFEMD and BiLSTM-Attention 1.00
Development and system performance evaluation of new thermochemical energy storage composite materials for direct photothermal conversion at low temperature 0.88
Carbon-negative power generation using syngas produced from CO2-cofeeding pyrolysis of lignocellulosic biomass 0.25
Flow stability and complex network analysis in a swirl combustor with dump and slope confinement 1.00
Microwave-catalytic co-pyrolysis of Chlorella vulgaris and marine waste plastics with N-doped bimetallic MOFs-derived additive for high-value oil production: Characteristics and mechanistic analysis 1.00
Numerical and experimental analysis of thermodynamic properties of plate heat exchangers at high Reynolds number based on different single-phase fluid structures 1.00
Importance of pore and chemical structures of activated biochar on bio-oil deoxygenation during online catalytic cracking of volatiles over activated biochars obtained from different activation methods 0.78
A compensation strategy to improve gas-solid heat transfer without sacrificing kinetic energy in a cyclone pyrolyzer 0.65
Diamine-Based Water-Lean Absorbent for CO2 Capture: Performance and Molecular Dynamics Insights 0.88
Multi-objective optimization analysis of on-demand design in multi-source heating system for low carbon development 1.00
A safety-reinforced mutual pulse heating strategy based on microscopic-state estimation for power-redistributable lithium-ion battery pack 1.00
Thermal characteristics and energy-saving research of P-PCM FinTwall in hot summer and cold winter regions 1.00
Improved hyperparameter Bayesian Optimization-Bidirectional Long Short-Term Memory optimization for high-precision battery state of charge estimation 0.67
Effects of biomass blending ratios on flame temperature, alkali concentrations and slagging degree in coal and cornstalk/pine mixed combustion 1.00
Multi-level optimization of low-temperature heating methods for large-capacity lithium-ion batteries based on temperature uniformity 1.00
A comparative study of battery state-of-charge estimation using electrochemical impedance spectroscopy by different machine learning methods 1.00
Real-Time Prediction of Battery Remaining Useful Life Using Hybrid-Fusion Deep Neural Networks 0.60
Analysis of photo-thermal characteristics and calculation of building carbon emissions based on paraffin containing microsphere glass enclosure structure 1.00
Enhanced melting behavior of phase change materials using anisotropic Primitive sheet-networks triply periodic minimal surface structure 1.00
High-efficiency and low-emission combustion in methanol-fueled linear range extender: experimental investigation of injection and ignition timing effects 1.00
Interaction mechanisms of flash boiling spray with air-wall-time in a SIDI engine and implications on flame propagation and emissions using experimental investigation and machine learning 0.94
A multi-physical field coupling modeling incorporated the non-thermal effect: carbothermic reduction of ZnFe2O4 by using microwave heating 0.80
Polyvinyl Alcohol-based Phase Change Aerogel Used for Safety, Thermal-comfortable, and Quiet Buildings 1.00
Comparative Analysis of Cylindrical Lithium-ion Battery Responses to Continuous and Intermittent Compression: Insights into Safety and Failure Mechanisms 1.00
Study for improving ammonia combustion and emissions using different hydrogen addition strategies in pre-chamber turbulent jet ignition mode 1.00
Condensation characteristics of liquid ammonia direct injection under diesel engine-like conditions 1.00
A method for estimating the SOH of lithium-ion batteries under complex charging conditions using dilated residual temporal encoding 1.00
Estimation of battery state of health and open circuit voltage at various depths of discharge based on deep learning and relaxation voltage 1.00
Multi-objective optimization of immersion cooling system for large-capacity lithium-ion battery with collaborative thermal management structures 1.00
NOx emission and thermal performance studies on ammonia/oxygen premixed combustion in micro planar combustor with a secondary oxygen injection 0.83
Enhancing parameter prediction in gas-fired boiler systems through node similarity-based feature aggregation 1.00
Combustion and Emission Characteristics of an Ammonia-Hydrogen Engine Using Hydrogen-Nitrogen Jet Ignition 1.00
Experimental study of water transport in gas diffusion layer of PEMFC considering the phase-change-induced flow 1.00
Multi-objective optimization of a hybrid PVT assisted ground source and air source heat pump system for large space buildings using transient metamodel 1.00
Investigation of metal foam enhancement under multilayer interaction for large-scale latent heat storage 1.00
Insights into thermodynamic characteristics of CO2/H2O(g) co-assist coke oven gas reforming using steel slag as heat carrier 1.00
Experimental study on charging and discharging performance of latent energy storage with topologically optimized fins: diffusion and convection design 1.00
Effect of Mg-additive and carrier gas in flue gas torrefaction and gasification: Fuel properties, kinetics and thermodynamic analysis 1.00
Comprehensive impact of Lewis/Brönsted acid sites and bed geometry on glucose dehydration 1.00
Co-combustion of brewery spent grain and coal: optimization strategies and synergistic effects 1.00
Catalytic conversion of carbon dioxide into cyclic carbonates and fuels over metal ionic liquid complexes: Experimental and DFT studies 0.88
Influence of papermaking biomass co-firing on operation energy efficiency and gas emission stability of a coal-fired thermal power plant: A case study 1.00
Effect of the Miller Cycle Strategy on Methanol and Ethanol Engines under Stoichiometric Combustion and Lean Burn 1.00
Development of LiCoO2 and CuO co-doped cobalt oxide composites for the comprehensive performance improvement of thermochemical energy storage in concentrated solar power plants 0.70
Effects of Ammonia addition and variable valve timing on knocking and performance of ethanol pre-chamber engine with high compression ratio 1.00
Experimental and DFT investigation on the impact of red mud waste on syngas and char from lignite partial gasification 1.00
Conversion of sewage sludge and corncob into clean solid fuel: Hydrochar properties and heavy metal chemical speciation 1.00
Combined absorption desalination-refrigeration cycle driven by low temperature heat source 1.00
Techno-economic assessment and optimization of PZ/MDEA-based CO2 capture for coal-fired power plant 1.00
Characteristics of ignition, combustion and emission formation of premixed ammonia-hydrogen blends by hydrogen-fueled pre-chamber turbulent jets 1.00
Regulation of reheating temperatures for sCO2 coal-fired power plant to improve the peak regulation depth 1.00
146 132.78
Separator-free aqueous zinc–iodine batteries: an in situ dual-confinement interface enabling electrostatic reversible polyiodide capture/release 0.75
Dual-effect pre-potassiation unlocks stable and high-energy potassium-ion batteries 1.00
An ‘ice-like’ water film for corrosion-proof seawater electrolysis 1.00
An electric double-layer capacitor with high performance at −80 °C 0.99
Utilizing the hydrogen evolution reaction: a bio-inspired pH-sensitive electrolyte for ultra-stable zinc-ion batteries at high temperatures 0.90
Interlayer chemical confinement enables highly reversible and durable lithium–chlorine batteries 1.00
Scaling green hydrogen and CCUS via cement–methanol co-production in China 0.48
Upgraded closed-loop recycling of PET for high-voltage solid-state electrolytes and their critical Li+ transport 1.00
Tailoring zinc-ion deep eutectic electrolytes through dual regulation of solvation shell volume and solvent polarity 0.95
High-voltage multi-S-heterocyclic covalent organic frameworks for zinc–organic batteries with high energy density and ultralong life 1.00
Discontinuous coordination boosting ion transport in solid polymer electrolytes 1.00
Magnetoelectric coupling drives ultrafast-charging MoS2 anodes for sodium-ion batteries 1.00
Orbital engineering-activated intrinsic conduction enables ultra-high-rate performance zinc storage in manganese dioxide 0.88
A stable 15-Ah anode-free Li pouch cell enabled by the electron resonance effect 1.00
A water-responsive molecule realizes stable Ah-scale Zn–I2 pouch cells with high Zn utilization 0.14
Ligand-field regulation enables high energy-efficiency cathodes for aqueous zinc-ion batteries 1.00
An amino acid-based functional additive enables fast polyiodide conversion kinetics for durable Zn–I2 batteries 0.97
Fused-ring topology orchestrates crystallographic control and polyiodide sequestration for ultra-durable zinc–iodine batteries 1.00
Solvation geometry engineering for stable high-voltage potassium-ion batteries 1.00
Grain boundary engineering enables (002)-textured zinc metal anodes with superior reversibility under ultra-high current density 1.00
An in situ engineered azo-linked conjugated polymer anode enabling ultra-stable, high-energy aqueous alkaline batteries at −60 °C 1.00
Enhanced d–p orbital hybridization accelerates two-step quasi-solid-state sulfur conversion in sodium–sulfur batteries 0.46
Organo-interhalogen chemistry enables high-voltage bromine redox for stable zinc batteries 1.00
Antisolvent engineering enhanced high-entropy liquid flow thermocells with giant power densities for low-grade heat harvesting 0.91
Helical counter-directional migration-induced solvation sheaths for constructing reinforced electrode–electrolyte interphases for ultra-stable anode-free lithium metal batteries 1.00
Dual-pathway proton transport blockade enabling high areal loading aqueous zinc metal batteries 1.00
Nonpoisoned metal catalysts enabled by concave carbon confinement for durable sulfur conversion in batteries 0.85
Taming zinc electrodeposition from the root to break zinc utilization/capacity barriers in practical zinc batteries 1.00
Redirecting iodine reduction pathways by decoupling adsorption energies for long-life Zn–I2 batteries 0.73
Combating solvent concentration polarization for ultrafast and highly stable lithium batteries at −60 °C 1.00
Surfactant-mediated mesoscopic confinement and selective interfacial shielding for highly stable zinc anode 0.78
Thermodynamically stable colloid dispersion electrolytes with the Tyndall effect for practical zinc-ion pouch cells 1.00
Dilute electrolyte-heterostructure interlocking regulates the amorphization conversion of Te cathodes for durable aqueous batteries 1.00
Coordination-escorted organo-interhalogen conversion enables durable dual-deposition Zn||I2 batteries with high areal capacities 1.00
A highly stable zinc–air battery based on a non-alkaline agar gel electrolyte 1.00
Electron push–pull engineering enables sustainable, anti-corrosive, and nonflammable phosphate electrolytes for long-lifespan lithium–sulfur batteries 1.00
Conjugated topologically confined composite electrolytes for robust high-voltage and high-temperature semi-solid-state lithium metal batteries 0.90
High-voltage lithium-ion battery with a wide operating temperature range and fast-charging ability 1.00
A high-energy asynchronously reverse dual-ion battery based on H−/Na+ insertion chemistry 0.93
Synergistic regulation of electrolyte environment and anode interface for constructing ultralong-life Zn–metal batteries with high depth discharge 1.00
Single-atom catalyzed formation of inorganic-rich SEI/CEI for durable anode-free solid-state lithium metal batteries 1.00
Electrolyte engineering enables rapid and durable Zn–air self-charging batteries 1.00
The interlayer proton capture and transport mechanism in oxygen electrodes boosts proton ceramic electrolysis 0.91
A universal interfacial strategy for suppressing aluminum corrosion by confining H+/OH− dynamics in aqueous energy storage systems 1.00
Cathode passivation suppression enables ultrastable industry-leading alkaline water electrolysis at hundred-ampere currents 0.92
Regioisomerism-guided interfacial design toward stable zinc metal anodes 1.00
The thermal runaway mechanism of fast-charging lithium-ion batteries using LiFSI-based electrolytes 1.00
π-hole driven defluorination for fast kinetics of Li/CFx batteries 1.00
Kinetic modulation enabling densely oriented electrodeposition of Zn anodes in aqueous batteries 1.00
Interfacial solar evaporation-driven lithium extraction from salt-lake brines for battery-grade Li2CO3 production 0.78
A competitive coordination effect to simultaneously achieve high-energy and stable cycles in a Li-metal pouch cell at −40 °C 1.00
An asymmetric functional gel polymer electrolyte enables superior interfacial compatibility for wide temperature lithium metal batteries 1.00
A hydrogen-bond network sieve enables selective OH−/Cl− discrimination for stable seawater splitting at 2.0 A cm−2 1.00
A sustained-release strategy of fluorinated solvents enables highly safe lithium metal batteries 1.00
Fluorinated carbon nitride-assisted solvation-regulation engineering toward polyvinylidene fluoride-based electrolytes for long-lifespan solid-state lithium batteries 1.00
A multifunctional natural polymer protective layer enables improved anti-corrosion and kinetics performances for highly stable zinc anode 1.00
Toward practical lithium metal batteries via a solvation structure regulation strategy in in situ polymerized fluorinated gel polymer electrolytes 1.00
Scale-up of solar interfacial evaporation devices: advanced optical, thermal, and water management for efficient seawater desalination 1.00
Trace molecular chelation engineering of a self-healing hybrid interphase for highly stable aqueous zinc-ion batteries 1.00
Deciphering failure mechanisms of Zn–S batteries: anion–cation synergy for dual-interface stabilization toward dendrite-free zinc and reversible sulfur conversion 0.90
Achieving a stable 518 Wh kg−1 Li metal pouch cell via SEI reconstruction engineering for high Li+ conductive hetero-grain boundaries 1.00
An anion outer-regulated electrolyte allows rapid desolvation to enable high-voltage lithium metal batteries 1.00
An MBene-based colloidal electrolyte for high depth-of-discharge and energy-density 2 Ah-scale Zn metal batteries 1.00
Hydrophobic ionic liquid enabled polyiodide confined transport in a cathode, realizing high areal capacity, stable zinc–iodine batteries 1.00
A Janus-type quasi-solid-state electrolyte enabling dual-ion relay for long lifespan of nonaqueous zinc batteries 0.78
Interfacial phase regulation of flexible single-ion conducting block copolymer electrolytes ensuring ultra-stable lithium metal batteries 0.93
Engineering an ion-pumping solid electrolyte interphase for ultra-stable aqueous zinc-ion batteries under deep discharge conditions 0.77
Synergetic insights into Nb single atoms and lithiophilic support for high-efficiency sulfur catalysis in Li–S batteries 1.00
Solar-driven water splitting with ascorbic acid oxidation for efficient hydrogen production 1.00
One ultrasonic measurement for non-invasive and whole-life-cycle thermal diagnosis of lithium-ion batteries 0.88
Zn2+-blocking effects of a proton-rich polyaniline layer enable Ah-level Zn–MnO2 batteries 0.92
Molecular-enabled lithium-locking for stable sorption-based atmospheric water harvesting 0.78
Crack pinning enables stable cycling of micro-sized silicon anodes for wide-temperature lithium-ion batteries 1.00
All-day freshwater and power generation via integrated photothermally enhanced thermoelectrics and evaporative cooling 1.00
Crystallization control and defect reduction for superior corrosion resistance of zinc anodes in aqueous zinc-ion batteries 1.00
Interfacial reactions take the lead: elucidating the dominant role of cathode–electrolyte interactions in triggering thermal runaway of high-nickel lithium-ion batteries 1.00
Dual-interfacial gating unlocks bidirectional ionic flux for high-efficiency hydrovoltaic energy harvesting 1.00
Polarity coupling in biphasic electrolytes enables iodine/polyiodide co-extraction for portable Zn–iodine batteries following a liquid–liquid conversion route 1.00
Taming polyiodides: phenol chemistry for shuttle-free and durable zinc–iodine batteries 0.80
Longitudinal spatial charge transfer optimization in composite cathodes enables ultra-stable all-solid-state batteries 1.00
Enhanced interfacial Zn2+ desolvation kinetics by a π-electron-rich Janus catalyst for robust Zn–metal batteries 1.00
Molecular engineering of scpd/scp-glucuronamide additive directs (100)-oriented Zn deposition for ultra-stable zinc-ion batteries 1.00
Immediate remaining capacity estimation of heterogeneous second-life lithium-ion batteries via deep generative transfer learning 0.42
Nanofluidic-enhanced high-mass-loading electrodes for energy-dense and high-rate lithium–sulfur batteries 1.00
Interfacial gradient engineering synergized with self-adaptive cathodic defense for durable Zn-ion batteries 1.00
Operando observing hydrogen evolution in commercial lithium-ion batteries 1.00
A 3D-printed hierarchical chimney for high-yield solar evaporation 0.15
Interfacial ionic and thermal regulation for highly reversible and ultra-reliable zinc-ion batteries 0.50
Amorphous anion skeletons induce rapid and cation-selective ion flux towards stable aqueous zinc–iodine batteries 0.59
Nano-carbon supported B/N-coordinated Fe single atoms with a tuned electronic structure for long lifespan zinc–iodine batteries 0.89
Low-temperature highly selective Kolbe electrolysis of acetic acid in bio-oil on a stable in situ grown RuO2/TiO2 at industrial-level current 1.00
A gel electrolyte-based direct seawater electrolysis 1.00
Blocking pore design enables highly reversible lithium–chlorine batteries 1.00
Tailoring the structural durability and proton conductivity of electrolytes for highly fuel-flexible and reversible ceramic cells 0.77
Unconventional catalytic kinetics of dual field regulated pyrochlore-type high-entropy ceramics towards the Li2S4 intermediate 0.83
A universal interfacial-engineering strategy for the air electrodes of reversible protonic ceramic electrochemical cells 1.00
Harnessing dual forms of water energy for all-weather high-performance electricity generation using amorphous slurry 0.90
Lotus seedpod-inspired electrocatalytic interlayers synthesized via ultrafast Joule heat treatment: overcoming polyiodide shuttle and enhancing redox kinetics in high-areal-capacity aqueous zinc–iodine batteries 1.00
High-conversion-efficiency and stable six-electron Zn–I2 batteries enabled by organic iodide/thiazole-linked covalent organic frameworks 1.00
Graded desolvation accelerators based on high-entropy alloys with widely distributed d-band centers for high-performance aqueous zinc-ion batteries 0.90
Breaking the limits of Ruddlesden–Popper cathodes to achieve a game-changer for proton-conducting solid oxide fuel cells 0.86
Molecular engineering of residual lithium compounds for stable LiNi0.92Co0.05Mn0.03O2 cathodes 1.00
A surface-to-interface boronation engineering strategy stabilizing the O/Mn redox chemistry of lithium-rich manganese based oxides towards high energy-density cathodes 1.00
Sustaining vacancy catalysis via conformal graphene overlays boosts practical Li–S batteries 0.92
Oscillating lithium ion-acceptor fluorine-donor electrolytes for practical fast-charging high-energy lithium metal pouch cells 1.00
A low-temperature aqueous Se-based battery with rapid reaction kinetics and unprecedented energy density 1.00
Achieving persistent and ultra-high voltage output through an arid-adapted plant-inspired high-performance moisture-electric generator 1.00
Unraveling the structure–performance relationship in hard carbon for sodium-ion battery by coupling key structural parameters 0.88
Insight into the corrosion microcell and passivation mechanisms of a Zn anode for aqueous zinc-ion batteries 1.00
Efficient hydrogen evolution at Ni/CeOx interfaces in anion-exchange membrane water electrolysers 0.13
Reconfiguring Zn deposition dynamics via an epitaxial Zn2+ pathway in profiled viscose rayon for long-cyclability zinc-ion batteries 0.91
Identifying the role of Zn self-dissolution in the anode corrosion process in Zn-ion batteries 0.17
Achieving a higher lithium density in anodes surpassing that of pure metallic lithium for high-energy-density batteries 1.00
Enhancing the kinetics and reversibility of copper batteries via anionic chemistry 0.90
Wearing “body armor” on zinc anodes for robust aqueous zinc-ion batteries 1.00
Designing multi-tentacle electrolytes to enable fast and deep cycling of aqueous Zn batteries at low temperatures 1.00
A single ion conductive “plasticine-like” solid electrolyte combined with a modulated d-band center of interfacial zinc atoms for highly reversible zinc metal anodes 1.00
Built-in single-ion-conducting polymer bridges for superior ion transport enabling long-life and high-voltage lithium–metal batteries 1.00
Compacting surface charge layers for efficient charge transfer toward stable Zn anodes 1.00
Multi-H-bonded self-assembled superstructures for ultrahigh-capacity and ultralong-life all-organic ammonium-ion batteries 1.00
Tailored glycol-functionalized mixed-conductive polythiophene coatings enable stable zinc anodes 0.86
Polyphosphonitrile derivative-based gel electrolytes for all-climate zinc metal batteries operating from −70 °C to +80 °C 1.00
The spontaneous cascade optimization strategy of the double enrichment improves anion-derived solid electrolyte interphases to enable stable lithium-metal batteries 1.00
Thermoresponsive solid electrolyte interphase enables safe lithium–sulfur batteries with high energy density 1.00
Tuning electronic structure of MOF-based solid-state electrolytes to activate dormant lithium and facilitate ion transport kinetics towards lithium metal batteries 1.00
Customizable crystalline-amorphous rectifying heterostructure cathodes for durable and super-fast zinc storage 1.00
Robust interphase derived from a dual-cation ionic liquid electrolyte enabling exceptional stability for nickel-rich layered cathodes 0.38
Grain-boundary-rich cathode enabling fast ion diffusion kinetics for low-temperature and high-rate lithium-ion batteries 0.90
A dynamic cathode interlayer for ultralow self-discharge and high iodide utilization in zinc–iodine batteries 1.00
Machine learning-assisted benign transformation of three zinc states in zinc ion batteries 0.90
Regulation of the cathode inner Helmholtz plane in dilute ether electrolytes using an electric-field-responsive solvent for high-voltage lithium metal batteries 0.77
Synergistically enhancing the selective adsorption for crystal planes to regulate the (002)-texture preferred Zn deposition via supramolecular host–guest units 1.00
High-iodine-loading quasi-solid-state zinc–iodine batteries enabled by a continuous ion-transport network 0.86
Bio-inspired hormonic electrolyte: negative feedback for ultra-stable zinc anodes 0.82
A cross-linked nanoflower network and Se-doping enabling sulfur-rich SPAN towards lithium–sulfur batteries beyond 600 W h kg−1 1.00
Small modification, striking improvement: super-fast charging over a wide temperature range by simply replacing n-propyl acetate with isopropyl acetate 1.00
A 405 W h kg−1 Ah-level lithium–sulfur pouch battery stabilized over 200 cycles by an electron-triode-like GeS2–NiS2 heterostructure 1.00
Developing low-resistance ion migration pathways using perfluorinated chain-decorated COFs for enhanced performance in zinc batteries 0.38
Suppression of interfacial water layer with solid contact using an ultrathin, water-repellent, and Zn2+-selective layer for Ah-level zinc metal batteries 1.00
Mg2+ initiated in situ polymerization of dioxolane enabling stable interfaces in solid-state lithium metal batteries 1.00
Unraveling the dynamic transformation of azobenzene-driven redox electrolytes for Zn-ion hybrid capacitors 0.75
Multifunctional additives with dynamic sacrificial S–S bonds for building self-assembled monolayers of Zn-ion batteries with improved stability and longevity 1.00
A unitized encapsulation architecture with durable epitaxial ion-conductive scaffolds for ultrastable solid-state sulfur cathode 1.00
An electrochemically paralleled biomass electrolyte additive facilitates the integrated modification of multi-dimensional Zn metal batteries 1.00
Ultrathin cellulosic gel electrolytes with a gradient hydropenic interface for stable, high-energy and flexible zinc batteries 0.78
Pushing slope- to plateau-type behavior in hard carbon for sodium-ion batteries via local structure rearrangement 0.71
23 22.41
Disinfection by-products induce population-level antibiotic resistance via mutation-driven competition and membrane reprogramming 1.00
Surface aging of Ti-based MXene attenuates mitochondrial toxicity via suppressed cellular uptake and reactivity 1.00
Biogeochemical and genomic drivers of groundwater DNRA: predictability of ammonium accumulation risk 1.00
Source-specific organic matter modulates Anammox via humic-like DOM in mangrove sediments: Implications for eutrophication mitigation 1.00
Effects of micro(nano)plastics on nutrient removal and greenhouse gas production under heavy metals cooccurence in AMF-enhanced constructed wetlands 0.83
Emission characteristics and formation mechanisms of ammonia and amines during residential solid fuel combustion at varying temperatures 1.00
Spatiotemporal Patterns of Nitrous Oxide Emissions in the Guitang River: Interplay of Wastewater Discharge and Ecological Restoration 1.00
Effect of oxidative treatment on the formation of disinfection byproducts from tire wear particles upon water chlorination 0.83
Unraveling the dynamics and growth potential of non-tuberculous mycobacteria along water transportation in chloraminated secondary water supply systems 1.00
Drinking water quality criteria value estimation for representative haloacetamide disinfection byproducts via a benchmark dose approach based on an association analysis between drinking water exposure and altered liver function in a community population in Wuxi from Jiangsu province 1.00
Formation mechanisms of chlorophenylacetonitriles from aromatic amino acids in chloramine disinfection 1.00
Enhanced denitrification performance via biochar-mediated electron shuttling in Pseudomonas guariconensis: mechanistic insights from enzymatic and electrochemical analyses 0.91
Regression model and artificial neural network model to predict halonitromethane formation from amino acids during UV/monochloramine disinfection in bromide-containing real water 1.00
Synergistic Air pollution and CO2 Emission Reduction in China’s Iron and Steel Industry Based on Real-time Monitoring Data 1.00
Molecular characteristics of halogenated disinfection byproducts elucidated by Fourier transform ion cyclotron resonance mass spectrometry 1.00
Performance and mechanism of tetracycline degradation by CuCo2O4 nanomaterial activated periodate 1.00
Comparative cytotoxicity of 3,5-dichloro-2-hydroxybenzoic acid and 3,5-dichloro-4-hydroxybenzoic acid and underlying mechanisms: Isomer-specific cytotoxicity of phenolic disinfection byproducts 1.00
Effects of preozonation on the formation of volatile disinfection byproducts from four different algal cells and organic matter in chlorination 1.00
Pathway to carbon neutrality in the iron and steel industry of China: a LEAP-China-IS model assessment 1.00
Efficient adsorption mechanism of ciprofloxacin by Zn-enriched hyperaccumulator derived biochar 1.00
Predicting sorption of organic pollutants on soils with interpretable machine learning 1.00
Interaction and sorption mechanisms of phthalate plasticizers and Cd2+ on biochar 0.83
Periodate activation for tetracycline degradation with MoS2/MnFe2O4 nanocomposite: Efficiency and Mechanistic insights 1.00
272 260.37
Preparation and Performance Study of Coal-Gangue-Based Fire Prevention Gel via Mechanical-Thermal-Chemical Activation 1.00
Enhancing Anammox Start-Up for Moderate- to Low-Strength Ammonium Wastewater: Adaptation of Mature Anammox Sludge to High- and Low-Loading Strategies 1.00
Antagonistic interactions between polyethylene microplastics and oxytetracycline mitigate toxicity of the anammox process and the proliferation of ARGs 1.00
Pilot-scale partial denitrification/anammox demonstration of concentrated circulating cooling water and municipal wastewater co-treatment 0.50
Study on the Effects of High-Load Induced EPS Accumulation and Thiothrix Introduction on the Performance and Microbial Community Evolution in Enhanced Biological Phosphorus Removal (EBPR) 1.00
Study on the Efficient Removal of Pollutants from Aquatic Environments Using Electroactivated Peracetic Acid: Unveiling the Formation Pathway of CH3C(O)O• on the Cathode Surface 1.00
The key mechanism of methanogenesis-driven anaerobic biologically induced phosphate precipitation from pickled mustard wastewater 1.00
Mechanistic Insights into the Adsorption of Tetracycline and Ciprofloxacin by Nitrogen and Sulfur Co-Doped Porous Carbon Spheres 0.89
Mechanochemical biochar enables electron-transfer-mediated ferrate(VI) activation for enhanced micropollutant degradation 0.97
Dual-functional Ti-MOF/g-C3N4 engineered PVDF membranes for photocatalytic self-cleaning and high-flux water remediation 1.00
Fabrication of multifunctional membranes via integrating g-C3N4 with Fe single-atom sites for efficient wastewater treatment 1.00
Efficient electro-Fenton-like degradation of para-nitroaniline via synergistic MIL-53(Fe,Cr)MOF/NGO heterogeneous catalysts 1.00
Waste-to-waste synergistic regenerative combustion of ultra-low concentration methane and coal gangue in fluidization: Multi-parameter coupling effects 1.00
L-Cysteine boosts Fe2+/Fe3+ cycling in Fe-doped cellulose-derived hydrothermal carbonation carbon for enhanced peroxydisulfate activation and diclofenac degradation 0.92
Biochar-Mediated Sustainable Remediation of Petroleum-Contaminated Soil: From Total Petroleum Hydrocarbon Degradation to Microbial Responses 1.00
Deciphering the granulation process in aeration self-circulating reactors: A robust strategy for continuous-flow aerobic systems 1.00
From phosphate removal to slow-release fertilizer: A closed-loop strategy enabled by Fe-BTC@sponge continuous-flow system 1.00
Dynamic Yet Functionally Convergent Microbial Communities Enable Robust Ammonia Removal during Long-term Operation of a Granular Sludge Bioreactor 0.17
Biofilm pre-colonization strengthening: A new strategy for low-inoculum and startup of partial nitritation/anammox process in integrated fixed-film activated sludge systems 1.00
Revelation of hydraulic retention time (HRT) on nitrogen and sulfur metabolism balance in pyrite-loaded biochar denitrogen system treating aquaculture wastewater 1.00
Electrochemically Activated Peroxymonosulfate with Modified TiO2 Nanotube Array Anode for PPCPs Degradation and Pharmaceutical Wastewater Detoxification: Mechanistic Insights and Practical Implications 1.00
A novel alkalinity slow-release filler for sulfur autotrophic denitrification: Performance, functional microbial community and metabolic mechanism 1.00
Mechanistic insights into sulfate-driven performance adaptation and membrane fouling in a UASB-SBR-AXMBR system: metabolic network reconstruction and microbial community succession 0.60
Metagenomic surveillance of temperature-drived bacterial threats to drinking water safety 1.00
A Multi-Dimensional AHP Comprehensive Evaluation of Zero Liquid Discharge Systems: A Case Study of Chemical Enterprise 1.00
Revealing the activation mechanism of periodate by groundwater treatment plant waste iron-containing sludge for sulfadiazine removal: the key activation role of transition metal Mn 1.00
Synthesis of Cu-embedded carbon composites via in situ CNTs growth for efficient liquid iodine capture 1.00
Supersaturation-Driven Seed Optimization and Nucleation-Regime Transition in Vivianite Crystallization 1.00
Design of molecularly imprinted nickel ferrite photocatalyst and its application in peroxodisulfate-triggered phenol degradation 1.00
Efficiently mitigating permeability-reactivity trade-off and membrane fouling on Cu-N-C functionalized ceramic catalytic membrane for enhanced water treatment 1.00
Mineral dissolution products drive anammox nitrogen removal via sludge aggregation 0.86
Optimization and mechanistic research on perchlorate removal by granular activated carbon-supported nanoscale zero-valent iron 1.00
Single-atom Fe on N-doped carbon drives 100% electron transfer process for organic pollutant degradation: Role of carrier structure in peroxymonosulfate activation 1.00
Two distinct patterns for advanced simultaneous nitrogen and phosphorus removal treating low C/N wastewater in a low DO anaerobic/oxic/anoxic-aerobic granular sludge (AOA-AGS) system 1.00
Iron-Confined Hierarchically Porous Biochar: Efficient BPA Degradation via Free Radical/Non-Radical Mechanisms from Multiple Active Sites 1.00
Investigation of surface drainage soil desalination in paddy fields using field experiments and numerical simulations 0.60
Enhancement of nitrogen removal from low C/N wastewater under the optimization of electron donors utilization based on phosphorus recovery strategy 1.00
Operation-resolved VOC emissions from electronics manufacturing: Implications for ozone formation, toxicity, and risk-oriented management 1.00
Novel insights into sulfide-enhanced nitritation with aerobic granular sludge 1.00
Fluoride stress regulates microbial-induced calcium precipitation: Synergistic removal of high ammonia nitrogen and fluoride and response mechanism 1.00
Anammox-based Multi-pathway Biological Nitrogen Removal for High Ammonia Nitrogen Wastewater Treatment: Rapid Startup and Community Response in Pilot-scale Application Under Starvation Strategy 1.00
Optimization of sulfate-reducing ammonium oxidation based on N/S: Nitrogen and sulfur removal performance, microbial community, and response surface methodology 1.00
Efficient nitrate reduction over Fe-Cu bimetals under UV irradiation: Performance and mechanisms 1.00
Ellagic acid-based iron coordination nanoclusters with delocalized electron transfer for efficient ofloxacin degradation via peroxydisulfate activation 1.00
Efficient and selective capture of sulfur dioxide by graphitic phase carbon nitride equipped with BmimCl-type deep eutectic solvents 1.00
Heterogeneous activation of persulfate by PDA coated Fe@MXene for efficient degradation of dyeing wastewater 1.00
Efficient nitrogen removal lacking canonical genes: Decoding the unique nitrogen metabolic network in Providencia manganoxydans AHY1 1.00
From Isatidis Radix waste to magnetic Fe3O4@Biochar: persulfate-activated efficient degradation of hazardous carbamazepine with mechanistic insights 1.00
Ce-Fe bimetallic zeolite-imidazolate framework catalyzed ozonation for enhanced tetracycline degradation: synergistic electron transfer and multi-radical reaction pathways 1.00
Volcanic rock-confined core-shell nanoreactors as a highly effective and recyclable peroxymonosulfate activator for levofloxacin degradation: Performance, mechanism, and ecotoxicity assessment 1.00
Facile synthesis of Cu2O/hydrochar composites achieving high-efficiency antibiotic capture in bioretention column 0.91
MgFe2O4/ZVI@AC-Activated Peracetic Acid System for Efficient Degradation of Tetracycline Hydrochloride: Mechanistic Insights and Matrix Resilience 1.00
Cobalt-Modified Catalyst Derived from Cold-Rolled Sludge for Phenol Degradation via PMS-Activated Fenton-Like Reaction: Performance and Mechanistic Investigation 1.00
Rational design of Fe–Nx self-doped carbon nanosheets from oily sludge for advanced energy storage 0.86
Battery-grade FePO4 recovery from P-rich urine via field-induced electro-Fenton in a compartmental electrolytic cell 1.00
Activation of peroxymonosulfate by nickel-cobalt-based PBAs and their derivatives for tetracycline degradation: Degradation mechanism and toxicological evaluation 1.00
Application of Novel Magnetic Biochar: Material Performance and Mechanisms for Efficient Persulfate Activation in Sulfamethoxazole Degradation 1.00
High-value utilization of hazardous solid waste for efficient electrocatalytic oxygen reduction to produce hydrogen peroxide 1.00
Switching exogenous to endogenous electron donor-driven denitrification via anaerobic/aerobic/anoxic strategy: Key drivers, enhanced performance, and microbial community dynamics 1.00
Machine learning-enabled Meta-analysis reveals the effect of microplastics on nitrogen removal performance in constructed wetlands and its potential mechanisms 1.00
Low-sludge partial nitrification enabled by carbon–nitrogen decoupling and encapsulated biofillers 1.00
Unraveling the microbial and functional mechanisms driving rapid algal-bacterial granular sludge formation in mariculture wastewater 1.00
Dual MOFs-Derived CdS/In2S3 Heterojunction Photocatalyst for Fast and Efficient Reduction of Cr(VI) 1.00
pH-Regulated Hydrolysis Strategy for the Construction of Stable Co3O4/NC@BC Composite Catalyst for Antibiotic Degradation in Water Systems 1.00
Construction of a novel Mn3O4/NiCo2S4 composite catalyst for enhanced peroxymonosulfate activation toward rapid degradation of ofloxacin: Mechanistic and toxicity assessment 1.00
Natural vivianite activates peroxymonosulphate for efficient ofloxacin degradation: Performance and mechanism 0.38
Commercial powdered activated carbon achieves high-efficiency nitrogen removal in sulfur-driven autotrophic denitrification at low temperatures 1.00
Magnetic Properties Driving Nitrogen Removal Improvement in Magnetite-Enhanced Activated Sludge: Mechanistic Insights and Process Validation 1.00
Multi-strategy Rehabilitation Enhances Nitrogen Removal in a One-stage Partial Nitritation/Anammox Reactor 1.00
Microbial insights into simultaneous linear alkylbenzene sulfonate and nitrogen removal from greywater in a biofilm reactor under varying treatment loadings 1.00
Enhanced solar light photo-Fenton degradation of refractory organics using algae-derived CQDs modified magnetic α-Fe2O3: Novel synthesis, mechanism insight, and phytotoxicity assessment 1.00
Optimized one-step pyrolysis synthesis of zinc-modified sludge biochar for enhanced perfluorooctane sulfonate removal from water 0.89
Cobalt-doped red mud composite as a porous catalyst for activating peroxymonosulfate to degrade methylene blue 1.00
Spinel lattice distortion and oxygen vacancy dynamics in self-standing NiCo2-xFexO4: mechanistic investigation of peroxymonosulfate activation pathways for antibiotic degradation 1.00
Electro-Responsive PVA/PAMPS Hydrogel Draw Agents for High-Flux Forward Osmosis Desalination with Efficient Regeneration 1.00
Recovery mechanisms of deteriorated nitrogen removal in aerobic granular sludge with/without salinity stress: Enhanced nitrification and transformed denitrification pathways 1.00
Efficient Removal of Cr(VI) Using Low-Temperature Biochar Derived from Stevia Residues via Wet-Process Phosphoric Acid Pretreatment 1.00
Carbon source and temperature effects on nitrogen removal performance in a novel adaptive activated sludge process 1.00
Renewal of Cu-Fe dual active sites in Z-scheme heterojunction for efficient photo-assisted Fenton water decontamination: Enhanced electron transport and minimized environmental biotoxicity 1.00
The ultra-large-capacity silica-supported ferric oxyhydroxide material: Preparation and mechanism on arsenic removal from water 1.00
Characterization of Neomegalonema-dominated granulation in aerobic granules bioreactor: Evidence for stable filamentous granulation and quorum sensing-related activities 1.00
Construction of mineral-carbon nanosheet using waste activated sludge and Bentonite for boosting dye adsorption 1.00
Optimizing Composite Wetlands Operation via Intermittent Aeration: Integrating Algae-Bacteria Symbiosis and Functional Fillers for Actual Sewage Treatment 1.00
Elucidating Hydrogen Bonding and Synergistic Adsorption Mechanisms of Morphine on Deep Eutectic Solvent-Functionalized Biochar through Machine Learning and Density Functional Theory 1.00
Broad-Spectrum Degradation of Emerging Contaminants and Industrial Dyes by a Robust CuCo(1:2)@N Catalyst Activating Peroxymonosulfate 0.83
Unraveling synergistic radical and non-radical pathways in bromide and iodide-activated peroxymonosulfate systems for selective abatement of micropollutant 0.86
Synergistic Enhancement of Organophosphorus Flame Retardant Degradation via Integrated Ce-PbO2 Electro-Activation and CoAl-LDHs@CoSx-rGO Catalytic Peroxymonosulfate Activation 1.00
Efficient Treatment of Rural Domestic Wastewater Using Glass Pumice Derived from Waste Glass in Constructed Wetlands: A Pathway to Sustainable Resource Valorization 0.90
Enhanced phosphorus recovery via chemical precipitation coupled with microbially induced recrystallization into vivianite from sludge digestion liquor 1.00
Enhancing 1O2 pathway via ultrasound-coupled iron-carbon activated persulfate for improving sludge dehydration and reducing antibiotics mutagenicity 1.00
Efficient removal of EDTA-Cu by a novel Green Fe-Ca-Al composite metal material coupled with NaClO 1.00
Stage-specific FeS-mediated regulation of Paracoccus denitrificans during carbon consumption by machine learning-assisted comparative proteomics 1.00
Sustainable sand filtration strategies for microplastic removal in irrigation water 1.00
Understanding microbial responses and developing enhanced nitrogen removal of sulfur autotrophic denitrification in wastewater treatment under salinity stress 1.00
Heterogeneous catalytic ozonation of bisphenol A with oxygen vacancy-rich montmorillonite supported iron oxide 1.00
Dual-function Ag2O/Zn-hemin MOF composites for radioactive iodide: performance and mechanism studies for removal and efficient visual detection 1.00
Life cycle environmental impacts of alkaline regulator substitution in electroplating wastewater treatment 0.90
Development of polydopamine/Cobalt single atom co-doped Al2O3 ceramic membrane: An effective strategy for oil-wastewater treatment 1.00
Rapid phosphorus adsorption: Polyaluminium chloride (PAC) modified glass pumice (MPAC-G) with exceptional regenerability for low-concentration aquaculture effluents 1.00
Low atmospheric pressure of plateau environments shapes microbial communities, nitrogen conversion, and carbon metabolism in biological nitrogen removal systems 0.94
Redox mediator improves sulfide-autotrophic denitrification under salinity stress via promoting electron transfer and synergistic metabolism 1.00
Pipeline sediments and secondary water supply tanks as dominant reservoirs of microbiological risk in drinking water distribution systems 1.00
Effects of different iron compounds on the acclimation of Feammox sludge: Nitrogen-iron transformation, sludge physicochemical properties, and microbial communities 0.96
Economic benefits of carbon source selection for polyphosphate-accumulating organisms in enhanced biological phosphorus removal 0.93
Enhanced activation of peroxymonosulfate using Y3+ substituted magnetic nanostructured ZnFe2O4 for carbamazepine degradation 1.00
Insight into the internal microscopic structure and composition of aerobic granular sludge under high salinity based on high-resolution Micro-CT technology 1.00
Defect-engineered Fe-O covalency in MOF for enhanced antimony removal: Unifying Sb(III) and Sb(V) remediation 1.00
Construction of acyl-homoserine lactone-producing engineered bacteria for activating low-temperature anammox process 1.00
Construction of hierarchically porous α-Fe2O3 nanosheets from Fe-PVP hybrid gel for sustainable Fenton-like degradation of tetracycline antibiotics with low H2O2 consumption 1.00
Chitosan-grafted polymerized Fe-pillared bentonite: Efficient removal of Cd and As from wastewater 1.00
Fe-N co-doped highly graphitized biochar for peroxymonosulfate activation toward the degradation of persistent organic pollutants: Critical roles of singlet oxygen and electron transfer 1.00
Activation of peroxymonosulfate by Fenton-conditioned sludge-derived biochar for efficient degradation and detoxification of sulfamethoxazole: Reactive oxygen species dominated process 1.00
Bio-based TEMPO-CNC reinforced Fe-doped UiO-66 with hierarchical porosity for efficient enrofloxacin removal 1.00
Fe/Ce-N co-doped buckwheat husk biochar for activation of PMS to degrade iopamidol: N-mediated synergistic catalytic mechanism and toxicity prediction 1.00
Electrochemical oxidation of caprolactam wastewater by a SnO2-Sb electrode with reduced TiO2-xN interlayer:Electrode characterization, environmental impact factors and degradation pathways 1.00
Graphene-directed Z-scheme charge transfer in a bismuth ferrite-based ternary heterojunction for efficient photo-Fenton-like antibiotic degradation 1.00
Vinasse-derived magnetic porous Fe-biochar for synergistic adsorption and non-radical oxidation of bisphenol A: Mechanisms and applications 0.90
Iron-Bearing Minerals Maifanite and Limonitum Enhance Sulfur-Based Autotrophic Denitrification via a Dual-Function Strategy: Bioactivity Stimulation and In Situ Electron Recycling 1.00
Simultaneous removal of nitrogen and manganese via autotrophic denitrification driven by iron-carbon micro-electrolysis in an upflow anaerobic sludge blanket (UASB) reactor 1.00
Vacuum ultraviolet light-driven, FeOCl-catalyzed heterogeneous photo-Fenton process for enhanced degradation of acetaminophen in water: Efficacy and mechanism 1.00
Promoting aerobic denitrification in the rhizosphere by vertical spatial stress: A strategy to enhance nitrogen conversion efficiency in constructed wetlands 1.00
Rapid activation of peroxymonosulfate by Co1Fe2/B-MXene membrane for removal organic pollutants 1.00
MIL-88A(Fe) fine-tuned nanocellulose polyvinylidene fluoride membrane for enhanced antifouling capacity via coordination 0.90
Bifunctional magnetic chitosan microspheres for simultaneous adsorption of Cu(II) and sodium dodecylbenzene sulfonate (SDBS) 1.00
Chlorella-derived N-doped biochar decorated with Fe2N/Fe3C nanocrystals for persulfate-based tetracycline removal 1.00
Spatial zoning-driven enhancement of simultaneous nitrogen and phosphorus removal: performance evaluation and microbial-metabolic responses 0.82
Removal of tetracyclines and estrogens with simultaneous ammonia retention in swine wastewater by aerobic treatment under short sludge retention time 1.00
Revealing in-situ ammonium adsorption and elimination response mechanisms in zeolite-driven nitritation for actual low-strength municipal wastewater treatment 1.00
Explaining the coexistence of complete ammonium-oxidizing bacteria and canonical nitrite-oxidizing bacteria under mainstream wastewater conditions from a substrate affinity perspective 1.00
Polyethylene glycol-enhanced CoFe alloy @biochar to boost Fenton-like reactions: A synergy of SO4·‐, 1O2, Co(IV)/Fe(IV) and electron transfer 1.00
Calcium synergy in the enhancing single-stage partial nitritation-anammox process for high-strength ammonium wastewater treatment 0.78
Yeast-biomineralized MnOx modulates electron flux: Diverting carbon from methanogens to denitrifiers in carbon-limited wastewater 1.00
Fabrication of thermally activated lead-zinc tailings/sodium alginate composites for high-efficiency adsorption of Cu2+/Cd2+ 1.00
Fe(III)-sulfonate complexes as autocatalytic engines: enabling long-lasting peroxydisulfate activation for refractory sulfonic azo compounds elimination 1.00
Synergistic effect of anthraquinone and biochar on anaerobic ammonia oxidation system initiation and functional microorganism enrichment 1.00
Synergistic mechanisms in Fenton-like reactions: Coal gasification fine slag-loaded Fe-Al LDH catalysts for phenolic wastewater degradation 1.00
Acid-Resistant Iron Sludge-Based Fly Ash Geopolymer Foam for Efficient Arsenic Removal with pH Self-Regulation 1.00
Metagenomic analysis of algal-bacteria symbiosis system (ABSS) under aniline stress: Synergistic optimization of aniline degradation and nitrogen metabolism 0.88
Differentiating biosynthesis from heterotrophic nitrification/aerobic denitrification for total-nitrogen removal 0.88
Integrated fixed-film activated sludge partial nitritation-anammox (IFAS-PN/A) for landfill leachate treatment rapidly established through the thermal inactivation of nitrite oxidoreductase 0.86
Co-nZVI@ATP activated persulfate for the degradation of Bisphenol S: Treatment efficiency and mechanism 1.00
Is destabilized coupled flat plate membrane technology valuable for high-salinity mine water treatment? 1.00
Microwave-assisted synthesis of Co-MGC-derived aerogel for efficient organic pollutants removal via peroxymonosulfate activation: dominant non-radical pathways of electron transfer and 1O2 1.00
Rapid start-up of partial nitrification in wastewater through aerobic starvation: remodeling population of four types of bacteria 1.00
Fe-Mn bimetallic loaded sludge biochar as a novel periodate activator for sulfamethoxazole removal: The combination of radical and non-radical mechanisms 1.00
Manganese-induced lattice oxygen activation of CeOx catalysts in liquid-phase low-temperature thermal catalytic: Improvement of catalytic oxidation activity and stability 1.00
Synergistic adsorption mechanisms of self-N-doped biochar for levofloxacin elimination: integrated experimental and DFT studies 1.00
Reed biochar by microwave-assisted pyrolysis for the removal of tetracycline in water 0.75
Amino/thiol-functionalized silica from coal fly ash for Cu2+ removal 1.00
Efficient calcined lanthanum-doped magnesium-aluminum layered double hydroxides for advanced phosphate removal: performance and mechanism 1.00
Removal of 1,2-dichloroethane from groundwater using modified biochar-zerovalent copper nanocomposites in combination with potassium borohydride 1.00
Reducing CH4 and CO2 emissions and improving water quality in rural waterlogging ponds by injecting CaO2 into surface sediments 1.00
Investigation of performance and antifouling mechanisms of calcium borate-modified PVDF membranes: Insights from the Dual-mechanism fouling model and XDLVO theory 1.00
Enhanced nitrogen removal and microbial synergy in a low-energy vibration-assisted membrane bioreactor for urban wastewater treatment 0.93
Hierarchical porous aerogel constructed from in-situ assembled zein nanoparticles for sustainable radioactive iodine capture 1.00
Revealing the dynamical effects of diurnal dynamics on community assembly in the electro-enhanced algal-bacterial symbiosis system for mariculture wastewater 1.00
Low-dose chlorite drives stable nitrite accumulation for partial denitrification 1.00
Ammonium shock-stimulated synthesis of c-di-AMP drove enhanced extracellular protein for sludge aggregation 1.00
Fe3+ stress in an algal-bacterial system: nitrification inhibition, iron distribution, and microbial tolerance 1.00
Temperature-directed morphological tuning of hydroxyapatite nanowires and dual-stage mechanism for Pb(II) adsorption 1.00
Nitrate-induced microbial metabolic activation and community composition optimization enhance the anaerobic biodegradation of thiamethoxam 1.00
Effect of MnFe2O4 loading on photocatalytic performance of BiVO4 for levofloxacin degradation with or without peroxydisulfate 1.00
Thermally derived sludge biochar as an efficient activator of persulfate for dye wastewater treatment 1.00
Peroxydisulfate activation by copper metal-organic framework derivatives: Deciphering the role of copper species 1.00
Development of a biofilm reactor using nano Fe3O4-modified biochar and red mud: enhanced synergistic removal of nitrate, cadmium, and acetaminophen 1.00
Electrocatalytic degradation of norfloxacin using La-Sb co-doped Ti/SnO2 electrodes 1.00
Efficient Adsorption of Phosphate on Magnetic Fe3O4@MOF@LDH Superstructures: Kinetics, Thermodynamics, and Mechanisms 0.67
Three-dimensional functionalized graphene oxide for enhanced hexavalent chromium remediation: Mechanistic insights and practical wastewater treatment potential 1.00
Oxalic acid induced synthesis of renewable Ce-MnFe2O4 nanocatalysts with hybrid crystallinity for enhanced ozone decomposition 1.00
Efficient and rapid removal of chromium(VI) from water via NH2-MIL-101(Fe)/NiAl-LDH composite adsorbent 0.92
Phosphorus-Doped CoFe-Prussian Blue Analogues (PBA)-Derived Oxide with Defect Engineering for Efficient Peroxymonosulfate Activation toward SMX Degradation 1.00
Mechanistic Insights into De Novo Synthesis for Chlorobenzene Formation under Simulated MSWI Conditions 1.00
Enhanced tetracycline hydrochloride removal by ultra-microporous phosphorus-doped KOH-activated microalgal biochar: Adsorption performance and mechanistic insights 1.00
DMF etching-free pore-making synergy: Alkaline lignin-derived biochar for non-radical PMS activation toward efficient BPA degradation 1.00
Performance enhancement of simultaneous nitrification-endogenous denitrification and phosphorus removal process: denitrification mechanisms under microbial interactions and the effects of aeration modes 1.00
Revealing the mechanism of ammonia-nitrogen removal by Paraburkholderia fungorum Gan-35 through insights from genomics, transcriptomics, proteomics, RT-qPCR, and enzyme detection 1.00
Nano zero-valent iron-mediated synergism chemical reduction and biological degradation of azo dye: The multiple regulation roles towards electron transfer and stress responses 1.00
Efficient removal of Pb2+ by iron-doped hydroxyapatite: Synthesis, adsorption, kinetics and mechanisms 1.00
Enhanced peroxymonosulfate activation for ciprofloxacin degradation enabled by a delignified wood-derived carbon 1.00
Design and filtration mechanism of mixed-dimensional microfiltration composites 1.00
Mechanistic insights and performance evaluation of plasma-activated persulfate systems for the degradation of organic pollutants 1.00
Photo-self-Fenton system driven by ultrasmall Fe nanoparticles induced internal electric field toward efficient wastewater purification 1.00
Ozone activation over core-shell nanoreactors for enhanced organic pollutants degradation: Surface-bound superoxide radicals induced by confinement effect 1.00
Fast nutrients removal through strengthened solid-liquid conversion and biomass synthesis of heterotrophic ammonia assimilation system in saline wastewater 1.00
Engineered clay-alginate composites for tetracycline removal: Mechanistic insights and sustainable processing 0.63
Single-atom cobalt anchored biochar/PVDF membrane for antibiotic removal via coupling membrane filtration and sulfate-based advanced oxidation processes 1.00
Robust dual-layer nanofibrous membrane with PTFE skin for acid/alkali recovery via membrane distillation 1.00
Macrophytes stimulate microbial interaction and carbon, nitrogen, sulfur, and iron cycling in iron-carbon micro-electrolysis constructed wetlands 1.00
The effect of sulfamethoxazole on methanogenesis and intracellular and extracellular antibiotic resistant genes transmission in anaerobic granular sludge 1.00
Norfloxacin degradation by rare-earth cerium-doped cobalt catalysts via PMS Activation: performance evaluation and mechanism insights 1.00
Nitrogen-doped cobalt-copper carbide as a PMS activator for efficient pollutant degradation via a 1O2-dominated non-radical mechanism 1.00
Construction of 4,5 '- diaminodibenzo-18-crown-6-grafted graphene cellulose composite aerogel for efficient and selective adsorption of Cs+ from acidic aqueous solution 1.00
An Fe(III)/H2O2 Fenton-like process enhanced by rifampicin: The role of hydroquinone moiety 1.00
Mo-Doped CuAl-Layered Double Hydroxide for High-Efficiency Adsorption of Tetracycline Hydrochloride in Wastewater 1.00
Bioaugmentation of Aerobic Granular Sludge with Gordonia sp. P6 for Enhanced Quinoline Degradation: Synergistic Microbial Interactions Mechanisms 1.00
FeOOH@HAnB catalyst with exposed (211) facet: High stability and new degradation routes for tetracycline 1.00
Enhanced catalytic efficiency of CeO2/BC@Fe3O4 magnetic catalyst in activating peroxymonosulfate for effective degradation of polycyclic aromatic hydrocarbons in water 1.00
Dual-strategy enabled Bi-doped MOF-derived In2S3 hollow nanotubes for high-performance photocatalytic reduction of Cr(VI) 1.00
Long-term effects of the hydrophilic and electrophilic modified magnetic carriers on partial nitrification at low temperatures: Enhancing Nitrite Supply by Stimulating Major Enzyme Gene Expression 1.00
Enhanced electrocatalytic production of H2O2 at N-doped porous carbon air-diffusion cathodes for water treatment via electro-Fenton 0.90
Insight into nano-confined Fenton-like oxidation based on magnetic graphite oxide catalytic membrane 1.00
Advanced Total Nitrogen Removal in Low C/N Wastewater through Simultaneous Nitrification-Heterotrophic Denitrification Coupled with Sulfur-driven Autotrophic Denitrification: Performance and Microbial Succession 1.00
Nanoengineered Scheelite-Structured SrWO4 Decorated on MXene Sheets: A Novel Platform for Electrochemical Sensing of the Anti-Cancer Drug Nilutamide with DFT Insights 0.05
Bimetallic FeNi-ZSM-5-catalyzed pyrolysis of photovoltaic waste: Selective and high-yield aromatic valorization for circular resource recovery 0.91
Free radical switching behavior between initial neutral and buffer neutral condition during Fenton-like degradation over pyrite/hematite mineral 1.00
Ball-milled biochar-vermiculite/zeolite magnetic composites for adsorption of lead and p-nitrophenol from wastewater: Synthesis, performance, and mechanisms 1.00
Mechanistic Insights into Recovery of Partial Denitrification/Anammox under Continuous Flow: Balancing Nitrite Supply and Microbial Competition 1.00
Citric Acid and Polyethylene glycol Modified Na-Cyclodextrin MOFs for Efficient Antibiotic Removal and In-Depth Investigation of Adsorption Mechanisms 1.00
Praseodymium-regulated microregion electron structures of Bi2WO6 nanosheets to construct non-radical platforms for the photocatalytic decontamination of water by hydrogen peroxide activation 1.00
Boosting microbial nitrogen removal through green-engineered iron nanocomposites: A sustainable strategy for high-strength inorganic nitrogen wastewater treatment 1.00
Sustainable Rice Husk Ash-Tannin Xerogel for Ciprofloxacin Removal from Water 0.30
Interfacial design of Sn0.96Fe0.02Ni0.02O/GGAC/γ-Al2O3/CeO2/α-MoO3 S-scheme heterojunction for PMS-activated photo-Fenton-like removal of phenol and hydrogen production 0.14
Gradual succession of dominant pathway from autotrophic to heterotrophic metabolism with the increment of C/N in pyrite-based biofilm-electrode reactor (PBER) 1.00
Mechanistic and Practical Insights into Tetracycline Degradation via 2D/2D N-doped Biochar/Carbon Nitride-Driven Peroxymonosulfate Activation: Toxicity Mitigation and Product Analysis 1.00
Environmental-friendly modification of porous biochar via K2FeO4 as a capacitive deionization electrode material 1.00
Effectiveness and Mechanism of Using PBS-ZVI Carriers to Enhance Granulation in UASB Reactors for Coking Wastewater Treatment 1.00
Multidimensional mechanisms of biochar in mitigating Fe(III) stress in anammox consortia 0.86
Sulfur-directed singlet oxygen activation by Fe3O4/biochar for enhanced antibiotic mineralization 1.00
CoO/ graphite activated sodium percarbonate: Enhanced interfacial adsorption facilitates efficient oxidative degradation of organic pollutants 1.00
In Situ Generation of Zero-Valent Copper on Swine Manure-Derived Hydrochar: A Waste-Born Catalyst for Enhanced Oxytetracycline Degradation via Peroxymonosulfate Activation 1.00
Underlying mechanisms of pollutant removal enhancement through the formation of low levels of granular sludge in an innovative continuous-flow reactor 1.00
Water Disinfection Accelerated Rubber Seal Aging within Water Distribution System over Varied Conditions 0.89
Importance and contribution of ammonia oxidizers to nitrogen removal in semi-natural artificial wetlands 1.00
Synthesis and Highly Selective Adsorption of Hydroxyapatite in situ Self-Co-Doped by Magnesium-Fluorine in Phosphate Tailings 1.00
Prediction of Tl(I) adsorption onto metal oxides and identification of critical factors using a machine learning-based model 1.00
Red Mud Modified Biochar for Peracetic Acid Activation to Degrade Sulfamethazine: A Non-Radical-Dominated Mechanism 1.00
Mechanism of self-driven naphthol blue black degradation in Fe(III)-activated peracetic acid system: Dominant role of high-valent iron species 1.00
Bi-doped HKUST-1 encapsulated in copper alginate matrix: A novel composite adsorbent for enhanced removal of chlortetracycline and oxytetracycline from aquatic systems 1.00
Enhanced residual water quality in the dewatering process of dredged sediment slurry via flocculation: Intrinsic mechanisms of dissolved organic matter removal using cationic flocculants 1.00
Enhanced pollutant removal in moving bed biofilm reactor under high-salinity condition via specialized quorum sensing bacteria 1.00
Insights into the 1O2 generation of activation of persulfate by zinc ferrite loaded on oxalic acid-modified activated carbon: Interface mechanism and molecular dynamics 1.00
Novel HN-AD bacterium G11: deciphering the denitrification mechanism and nanoFe3O4 enhancement research 1.00
Prussian blue analog-derived Fe-Mn oxides for the enhanced activation of persulfate in sulfadiazine degradation: radical generation mechanism and electron transfer 0.71
Performance and mechanism of double S-scheme FeOOH/TiO2/g-C3N4 heterojunction for acetochlor degradation under visible-light-driven photo-Fenton 1.00
Adaptation mechanism of anammox granular sludge to high ammonia nitrogen mixed nutrient wastewater: Regulating metabolism function through particle size differentiation 1.00
Comprehensive analysis of intracellular electron transfer and microbial succession in response to florfenicol in mixotrophic denitrification systems 1.00
Iron-manganese synergistic enhanced denitrification in slow-release carbon-based fillers: Mechanisms and performance 1.00
Highly porous biochar engineered from agricultural waste for efficient removal of sulfonylurea herbicides in aqueous systems 0.80
Valorizing Industrial and Agricultural Wastes into a High-Performance Composite for Remediation of Heavy Metal-contaminated Tailing Sands 1.00
Mitigation of waste sulfur acid in lead smelting: Substance flow analysis of a case study in China 1.00
Nitrogen-Vacancy-Rich Co3O4/Carbon Nitride Activating Peroxymonosulfate for Efficient Micropollutant Degradation: Dominant Role of Superoxide Radicals 0.93
Application of novel nano-scale magnesium oxide adsorbent to remediate fluoride-contaminated groundwater: material preparation and pilot-scale study 0.08
Harnessing metabolic pathway modulation and multiple endogenous driving forces for sustainable nitrogen removal from high-ammonia extremely low C/N ratio wastewater 1.00
Mn doped Fe-gallate acid MOFs loaded on the surface of biomass cotton fibers: Fenton-like degradation of tetracycline 1.00
Synthesis of CaCO3 microspheres modified by glycine and ethylene glycol for adsorption removal of Cd(II) 1.00
Acid-induced Fe3O4 active sites coupled with Visible- Light- perdisulfate activation efficiently degrades Bisphenol A 1.00
Response of nitrogen transformation and microbial community to aromatic compounds stress along heterotrophic nitrification and aerobic denitrification process 1.00
Innovative sustained-release Ferrate(VI) composites for controlling algal derived disinfection by-products in waters 1.00
Comammox-Based Simultaneous Nitrification and Denitrification in Mainstream Membrane-Aerated Biofilm Reactor – A Modeling Study 1.00
C4-HSL drives rapid biofilm formation in low-temperature aquaculture effluent: strengthening structural stability of biofilm and improving nitrogen removal efficiency 1.00
How do salt-tolerant granular sludge cultivated under different conditions carry out nitrogen and phosphorus removal? 1.00
Optimizing pilot plant flux by harnessing loach metabolism to overcome biocake steric hindrance 1.00
Cost-effective fabrication of fluorite tailings-based calcium silicate hydrate for excellent adsorption performance of Cr (III) from aqueous solution 0.89
Superior Cu (II) purification using carrageenan biochar-olivine composite: Synergistic effects of K (I), Mg (II), Fe (II/ III), and Si (IV) 0.17
Efficient removal of bisphenol A by BiFeO3/CuMnFe-LDHs Z-scheme heterojunctions in a peroxymonosulfate/visible light system: A mechanism study 1.00
Directed producing singlet oxygen for tetracycline hydrochloride degradation using red mud-based heterojunction within sonophotocatalysis system 1.00
Fe3O4-mediated regulation of aerobic granular sludge under high salinity and fluctuating C/N ratio: Mechanisms and implications for seafood processing wastewater treatment 1.00
Adsorption of weak polar zearalenone mycotoxins from water environment by tourmaline mineral powder of spontaneous electrical polarization properties 1.00
Enhancing energy efficiency in CO2-rich amine solution regeneration using a Cu-modified attapulgite catalysts 1.00
Synthesis of PPy-BiVO4-Cu2+ heterojunction and its visible-light-driven photocatalytic degradation of 2,4-dichlorophenol 1.00
Enhanced adsorption of Pb(II), Cd(II), and Zn(II) by tannic acid-modified magnetic fly ash-based tobermorite 1.00
System characteristics of integrated continuous flow simultaneous partial Nitrification, Anammox and Denitrification (SNAD) for NH4+-rich wastewater: performance, sludge evolution, metagenomic sequencing analysis 1.00
Gel-fouling on the microfiltration membrane for wastewater reclamation and its suppression by using electric fields: from the viewpoints of spatiotemporal and force analysis 1.00
Enhanced peroxymonosulfate photoactivation by nitrogen-doped multiwalled carbon nanotube-loaded CoFe2O4 for orange G degradation: Performance, mineralization and reaction mechanism 1.00
Electrochemical degradation of toluene-2,4-diamine by graphene oxide-modified Ti/Sb-SnO2/α-PbO2/β-PbO2 anode: Performance and mechanism 1.00
Z-scheme MIL-88A(Fe)/LaFeO3 heterostructured photocatalyst: Boosting photo-Fenton activity for enhanced organic pollutant detoxification 1.00
Single-step synthesis of nitrogen and phosphorus co-doped biochar and its application in dye removal: synergistic effects of adsorption and peroxymonosulfate activation 1.00
Yolk-shell CoFe2O4@hollow mesoporous carbon spheres for Levofloxacin hydrochloride removal: Synergy enhancement effect of adsorption and degradation 1.00
Identification of novel strain Acinetobacter baumannii H1 and its improvement capacity for nutrient removal after coimmobilized on activated carbon and CaCO3 in real aquaculture wastewater 1.00
Alpha-MnO2 catalyst with high formaldehyde oxidation and moisture resistance by joint cerium modification and phosphoric acid post-treatment 1.00
Exploring 3,4 dihydroxybenzaldehyde-functionalized MIL-88A(In:Fe) towards the efficient adsorption of tetracycline-hydrochloride 1.00
Tuning the pore structure and hydrophobicity to unravel the adsorption mechanism of polycyclic aromatic hydrocarbons onto carbon materials 1.00
239 222.23
Efficient Electrochemical Tap Water Softening via Lorentz-Driven Bidirectional Mass Transfer 1.00
Coupled Oxidation and Sequestration of Sb(III) via Oxygenation of Engineered FeS Nanoparticles: Dominant Role of Superoxide and Structural Incorporation 0.83
Unraveling the Reciprocal Enhancement Mechanism in a Pd–Gr + BDD Electrochemical System for High-Efficiency Degradation of Tetrabromobisphenol A 1.00
Integrated On-Site Electrocatalytic H2O2 Synthesis and Membrane Catalysis for Sustainable High-Salinity Wastewater Treatment 1.00
Disulfide Oxidation in Water: Thiosulfinate Intermediates Dictate Redox Fate 1.00
Implementation of Ozonation and Biological Activated Carbon (O3–BAC) Process in China Mitigates Disinfection Byproduct Formation Trends in Finished Drinking Water 1.00
Closed-Loop Recycling of End-of-Life Poly(Ether Sulfone) Membranes: Upcycling Waste into Bisphenol S via a Catalyst-Free Hydrolysis Process 1.00
Overlooked Role of Coulombic and Dipole–Surface Interactions in the Rejection of Polar Contaminants by Polyamide Membranes 1.00
Copper-Enhanced Coupling Adsorption and In Situ Fenton-Like Oxidation of Organic Pollutants in Batch and Fixed-Bed Systems: Sustainable Fe and Cu Dual-Site Redox Cycling 1.00
Amine-Containing Micropollutants Exposure Reshapes Sludge Anaerobic Digestion via Enzymatic Inhibition and Stress-Mediated Alteration of Methanogenic Pathways 1.00
Beyond Hydrophilicity: Mapping Multidimensional Interplay Governing Membrane Fouling in Wastewater Reclamation 0.95
Fluorinated Lithium Salts: A Significant Class of Environmental Pollutants of Emerging Concern from Spent Lithium-Ion Battery Recycling 1.00
FeOOH-Catalyzed Removal of Extracellular Antibiotic Resistance Genes: Structural Effects on Kinetics and Mechanisms 1.00
Regulating Phenolic Pollutant Polymerization from Oligomers to Multimers via Carbon Nanotubes in Permanganate Systems 1.00
Engineering Highly Permeable and Antifouling Polyamide RO Membranes via Interfacial Polymerization with Molecularly Designed Zwitterionic Surfactants 1.00
Role of Microoxic Control in Alternating Anoxic/Oxic Systems for Selective Enrichment of N2O-Reducing Bacteria and N2O Mitigation in Wastewater Treatment 1.00
Ecologically Informed Design of Synthetic Microbial Community Enables Robust Degradation and Engraftment for Antibiotic Removal in Wastewater 1.00
Spatially Decoupled Dual-Active Sites Break the Activity–Humidity Trade-Off: Achieving Water-Promoted Ozonation of Dichloromethane 1.00
Divergent Hydrodynamic Impacts of Feed Spacer Designs on Scaling and Biofouling in Spiral Wound Membrane Modules 1.00
Sunlight Triggers the Activation of Sodium Percarbonate for Toxic-Byproduct-Free Disinfection of Antibiotic-Resistant Bacteria 1.00
Enhanced Electrochemical Dehalogenation via Direct Electron Transfer on Pd/Ti4O7 Flow Cathode 1.00
Unexpected Polymerization Pathway in the Carbocatalysts/Permanganate Processes for Water Decontamination 1.00
Highly-Efficient Seawater Hydrogen Production via a Plug-and-Play Solar-Powered Membrane Distillation-Electrolysis System 0.58
Integrated Resource Recovery from Sludge for Synergizing Quorum Sensing and Interspecies Electron Transfer in Anaerobic Treatment 0.90
Causal-Inference Machine Learning for Unveiling Hydroxyl Radical Reactivity with Antibiotics in Water Purification 1.00
Selective Activation of PMS by a Single-Atom MOF in Confined Space: Hydrogen Bond-Assisted Nonradical Pathway and Continuous Flow Verification 1.00
Tailoring Dense Polyester Nanofiltration Membranes for Selective Mineral Retention in Health-Oriented Potable Water Production 1.00
Dual Effects of In Situ Free Nitrous Acid Accumulation on Membrane Fouling in Acidic Membrane Bioreactors 0.14
Steric Interaction-Engineered Free Volume Network in Polyamide Nanofiltration Membranes for Ultrafast Water Purification 1.00
A Novel Biphasic Absorbent for Liquid–Solid Phase Separation Induced by Nanoparticle Polarity Difference and Application in DAC 1.00
Trace Mn(II)-Mediated Peroxone Process Boosts Oxidative Capacity for Electron-Deficient Pollutant Removal: Key Role of Transient Mn(III) and Overcoming pH Limitations 1.00
Coordination Microenvironment Engineering in Nanoconfined Structures Shifts Peracetic Acid Activation toward Broad-Spectrum Radicals for Enhanced Hospital Wastewater Purification 0.80
Dinuclear High-Valent Manganese–Oxo Complex with Cyclic Open-Closed Diamond Core for Robust Water Decontamination 1.00
Granular Stratification Enables Stable and Efficient Nitrogen Removal in Anammox Sludge Bed Reactors 0.64
Sequential H2O2 Production and Activation via Dual-Cathode Flow-Through Electrocatalysis for Efficient and Sustainable Water Treatment 1.00
In Situ Peroxymonosulfate Activation Generates Reactive Species in Iron-Containing Sludge Systems for Efficient Sludge Dewatering and Emerging Organic Contaminant Degradation 0.75
Synthetic Biofilms for Green Membranes: Engineering Low-Energy Filtration Systems 1.00
Unveiling Exceptional Membrane Distillation Performance via a Wettability Transition in Covalent Organic Frameworks 1.00
Cytotoxicity Assessment and Environmental Fate of Halogenated 4-Hydroxy-Benzaldehydes in Drinking Water 1.00
Atomic H* Production Amplified by Precisely Tailored Ag–Pt Dual-Atom Synergy: Crucial Roles in 6PPD Detoxification for Water Purification 0.90
Thermally Intensified Synthesis of Polyester Membranes for Highly Selective Removal of Haloacetic Acids 1.00
Unveiling Halogenated and Nitrogenous DBPs in Chloramination-Ozonation Process: DFT-Driven Formation Pathways from Tyrosine and Toxicity Assessment 0.86
Multiscale Mechanistic Insights into Hydrogen Production from Microalgae via Molten Hydroxide-Mediated Thermochemical Conversion 1.00
Light-Induced Hydroxyl Reconstruction in ZnSnGa Layered Double Hydroxide for Selective ROS Modulation toward Complete Mineralization of VOCs 1.00
Iron-Loaded Microplastics: An Unintended Legacy of Fenton Wastewater Treatment with High Affinity for Arsenic 1.00
Distinct Sorption and Rejection Behavior of Hydrophobic Endocrine-Disrupting Compounds by Chlorinated Polyamide Nanofiltration Membranes: Mechanisms and Implications 1.00
Functional Dominance and Competitive Strategy of Comammox Bacteria among Ammonia Oxidizers in Urban Secondary Effluent-Constructed Wetlands 1.00
Spatial Organization of Microbiome Stability and Nitrogen Removal Resilience in a Full-Scale Plug-Flow PN/A System 0.90
Enhancing Nanofiltration Rejection of Perchlorate by Suppressing Co-Ion Competition for Water Treatment: The Role of Membrane Structural Rigidity 1.00
Unlocking Clean and Efficient Treatment of Hypersaline Wastewater via Synergistically Triggered Oxidation–Reduction Pathways on a Bifunctional Cathode 1.00
Natural Polyphenol-Promoted Degradation of Emerging Contaminants during Copper Sulfide Mineral Oxygenation: The Synergism of Surface-Bound Radicals and Singlet Oxygen 1.00
Reaction of the Peroxyacetyl Radical with Dissolved Organic Matter: Kinetics, Mechanism, and Impacts on Contaminant Degradation 1.00
Surface-Associated Bacteria Trigger Cyanobacterial Cell Lysis during Preozonation 1.00
Innovative Bipolar Co-Planar Janus Membranes for High-Efficiency Electrocatalytic Filtration and Sustainable Water Reuse 1.00
Tuning Electron Localization to Unlock Inert Tetrahedral Oxygen Species for Boosting Catalytic Oxidation of VOCs from Single to Mixed Components 1.00
Deformation in Layer-by-Layer Hollow Fiber Nanofiltration Membranes: Compaction–Expansion Model 1.00
Nanoconfinement Enhances Electrochemical Oxidation in Saline Wastewater Treatment 1.00
Salting-Out Effect-Enhanced Organics Adsorption Diminishes the Chloride/Sulfate Separation Selectivity of Nanofiltration Membranes For High Salinity Wastewater 1.00
Are We Characterizing the True Peaks of Disinfection Byproducts? Establishment of a Rapid and Accurate 14/15N-HaloFormula Methodology for FT-ICR-MS 0.50
Mixed Nascent Layer Based on Reactive Nanofiber to Regulate High-Performance Nanofiltration Membranes 1.00
Plant-Level Health Benefits from Decarbonizing the Iron and Steel Industry in China 0.80
Rhamnolipid Modulates Microbial Interspecies Electron Transfer for Synchronous Sulfidogenesis and Acidogenesis from Mariculture Solid Wastes 0.86
Tailoring Cu+–Ov–Ti Ensembles with Electrophilic O– Species for Enhanced Catalytic Toluene Oxidation 1.00
Induced-Charge Assisted Faradaic Capacitive Deionization: A New Paradigm to Break the Capacity-Rate Trade-off 1.00
Production of Surface-Bound Hydroxyl Radicals on Sediments for Adsorbed Contaminant Transformation at Oxic–Anoxic Interfaces 1.00
Tailoring the Interfacial Microenvironment of Atomically Dispersed Zinc to Boost Electron Transfer Process for Water Purification 1.00
Oxygen-Dependent Cascade Defluorination of GenX via Synergistic Mechanism of Singlet Oxygen and Nitrogen Oxide Radicals in Fe3+/Fe2+ Redox Cycling 1.00
Ionic Liquid-Mediated Structural Regulation of Reverse Osmosis Membranes for Enhanced Antifouling Performance against Diverse Organic Foulants 1.00
Catalytic versus Pure Ozonation: Insights from Real Wastewater Treatment Performance 0.50
Mechanistic Insights into Triplet Excited-State Organic Contaminants: Unrecognized Role of Chemical Probes and Scavengers in UV-Based Advanced Oxidation Processes 0.67
Is Higher Current Necessary? Low-Current-Enhanced Electrocatalytic Ozonation through Synergistic Surface •OH Generation and Mass Transfer 1.00
<atl>Reaction Pathway Tuning between Electron Transfer-Mediated Degradation and Polymerization in Fe-MoS sub2/sub -Based Persulfate Activation System</atl> 1.00
Stable Isotopic Labeling and Automated Reactivity-Directed Approach Accelerating Discovery of Toxic Disinfection Byproducts in Chlorinated and Chloraminated Waters 1.00
Pathways for the Mineralization of Perfluorooctanesulfonic Acid under a Smoldering Reductive Atmosphere 1.00
Immunotoxicity of Disinfection Byproducts and Disinfected Water: Sensitive Assessment Using Impairment of Macrophage Anti-infection Capacity as an End Point 1.00
Ultralow Dose Protoporphyrin IX-Mediated Ferrate(VI) System for Rapid Degradation of Phenolic Pollutants: Key Roles of Fe(V/IV/III) Complexes 1.00
Formation of Iodinated Disinfection Byproducts in Periodate-Based Advanced Oxidation Processes: The Self-Supplying Iodine Mechanism 1.00
Interface-Engineered Nanohybrid Membranes for Selective Boron Removal from Brackish Water and Seawater Reverse Osmosis Permeate 0.29
Room-Temperature Formaldehyde Oxidation over ZIF-Derived Co-Based Catalysts: Morphology-Dependent Co-N4 Sites and Enhanced Oxygen Activation 1.00
Coremoval of Ca and Organics: In Situ Hardness-to-Catalyst Upcycling Enabling Nonradical Ozonation for Sustainable Water Purification 1.00
Deciphering Sulfur-Based Denitrification in Confined Alluvial-Lacustrine Aquifers through Multi-isotope (15N, 34S, 13C, and 18O) and Metagenomic Analyses 1.00
Dual Pathways in 222 nm Far-UVC Photodegradation of Sulfonamides: Direct Photolysis and Radical-Mediated Self-Sensitized Oxidation 1.00
Analysis of Chlorinated Microbially Derived Dissolved Organic Nitrogen: Linking Molecular Structure to Toxicological Risk 1.00
Synergistic Control of Amine Emissions and Material Balance for Chemical CO2 Capture with Novel Solvents 1.00
Insight into the Transport Mechanism of Low-Molecular-Weight Charge-Neutral Organics in Reverse Osmosis: the Critical Role of Molecular Polarity 0.83
Thyroid Function Effects of Mixed Exposure to Urinary Trihalomethanes and Haloacetic Acids: Based on an Integrated Framework of Exposure Assessment, Qualitative Association, and Quantitative Attribution 1.00
Ca2+-Mediated Humic Acid Clusters: The Key to Unraveling Neutral Pollutant Rejection in Nanofiltration 1.00
Hierarchical-Porous Gas-Permeable Membrane toward Efficient and Robust Ammonia Recovery 1.00
Selective Generation of Co(IV)–Oxo Species in Catalytic Ozonation Process for Effective Decontamination of High-Salinity Wastewater 0.89
Palladium–Gallium Intermetallic Compound with Unique Ability to Activate Water for Catalytic Steam Reforming of 1,2-Dichloroethane 1.00
Multiscale Exploration of Dynamic Phase-Splitting Behavior for Biphasic Solvent in CO2 Capture 1.00
Fouling Mechanisms of Nanofiltration Membranes Induced by Residual Aluminum and Natural Organic Matter in Drinking Water Treatment 0.86
An Advanced Pore Flow Model for Uncoding Micropollutant Transport in Nanofiltration Membranes 0.78
Tailoring Polyamide Nanofiltration Membranes for the Removal of Environmental Micropollutants: Synergistic Diffusion-Reaction Modulation in Interfacial Polymerization 1.00
Bioinspired Allosteric Peroxidase-like Enzyme with Dynamic 3D Catalytic Centers for Advanced Water Treatment 1.00
Cascaded Fe-*OOH and Co-*H2O2 Intermediates on Fe–Co Dual Sites for Orchestrated O2 3-Electron Electro-Fenton Pathways 1.00
Enhancing the Rejection of Small Neutral N-Heterocyclic Molecules with SO4•–-Modified RO Membranes 1.00
Simultaneous Control of Chlorite and Micropollutants in Drinking Water through Far-UVC Photolysis 1.00
Surfactant-Triggered Alkyl-like Radical Formation in Anaerobic Thermally Activated Persulfate System for Deep Removal of Highly Chlorinated Contaminants 1.00
Partition-Transformation Coupling Effect on Photolytic Detoxification of Polybrominated Diphenyl Ethers (PBDEs) Bonding with Polystyrene Microplastics: The Critical Role of Hydrogen Donor and Aryl on Mitigation of Polybrominated Dibenzofurans (PBDFs) Formation 1.00
Oxalic Acid-Promoted Pollutant Attenuation by Hematite via Hydrogen Radical Generation under Aerobic Conditions 1.00
Engineered Nanoparticle Interfaces Optimize Phase Change Behavior through Enhanced Mass- and Heat-Transfer for High-Efficiency Industrial CO2 Capture 1.00
Electrochemical Upcycling of Shell Waste for Sustainable Nutrient Recovery from Wastewater 0.56
Architected Composite Reverse Osmosis Membrane with Multibarrier for Enhanced Ammonium Selectivity 1.00
Enhancing Mainstream Anaerobic Wastewater Treatment through Electrogenerated Iron Carbonate 0.20
Reinforcing Covalency via d–p–d Orbital Coupling Enables Dual-Site Selective Ozone Activation for Efficient CH3SH Mineralization 1.00
Engineering Dual-Functional La–O Vacancy Associates in a LaMnO3.15 Perovskite for Enhanced CO and VOC Oxidation 1.00
Blood Trihalomethane Concentrations and Blood Pressure during and after Pregnancy: A Cohort Study in China 0.68
Benzene Ring-Driven Metal Hydrolysis and Floc Formation in Coagulation: Mechanistic Insights from Organic Structural Units 0.60
Dynamic Evolution of Mn–O Site and ROS Formation in Room-Temperature Formaldehyde Oxidation over Phase-Dependent MnO2 1.00
Molecular Insights into the Transformation of Dissolved Organic Matter during Chlorine Photolysis: The Importance of Oxygen Addition Reactions in the Disinfection Byproducts Formation 1.00
Triplet-State Dissolved-Organic-Matter-Activated Oxalic Acid Triggers Contaminant Reductive Degradation: The Pivotal Role of the Carbon Dioxide Radical Anion 1.00
Free Nitrous Acid-Guided Microbial Restructuring Enables Selective Enrichment of Candidatus Nitrosoglobus in Acidic Partial Nitritation Process 0.08
<atl>Transforming Coal Fly Ash into Climate Solutions: AlOOH-Supported Solid Amine Adsorbents for Cost-Effective and Ultranegative CO sub2/sub Emissions</atl> 1.00
Temporal Tracing of Pollution Source Using a Continuous eDNA Approach 1.00
Performance Evolution of Polyelectrolyte Hollow Fiber Nanofiltration Membranes under Chlorine Exposure: Mechanisms and Insights for Application 1.00
Nitrogen Fate in Polyurethane Decomposition: Pathways Uncovered by In Situ Synchrotron Vacuum Ultraviolet Photoionization Mass Spectrometry 1.00
Ultrafast Peroxymonosulfate Activation via an Easily Synthesized Cobalt Cluster for Selective Cobalt(IV)═O Generation 0.69
Upcycling of Aqueous Phenol Pollutants via Directed C–C Coupling in an Enzyme-Inspired Angstrom-Confined Flow-Through System 1.00
Synergy between Surface Epoxy Groups and Co–C Sites in Nitrogen-Free Single-Atom Catalysts for Electro-Fenton Water Purification 0.86
Ambient-Temperature Chlorobenzene Combustion by Ozone: Proton–Electron Concerted Polarization over Brønsted Acid/Single-Atom Ni Pairs on SmMn2O5 1.00
Synergizing Surface-Bound Radicals with Singlet Oxygen to Expedite Emerging Organic Contaminant Degradation in Soil-Based Heterogeneous Surface Oxidation 1.00
Bridging Dissolved Organic Matter Reactivity to Ozonation Catalysts for Cu@Al2O3 from the Molecular Level by Machine Learning 1.00
Identification and Transformation of Reactive Species in Peracetic Acid Catalytic Activation Systems Using In Situ Electron Paramagnetic Resonance 1.00
Synergistic Piezoelectric-Nanoscale Zero-Valent Iron Catalyst for Peroxyacetic Acid Activation: A Self-Driven Advanced Oxidation Process 1.00
Mass Transfer Limitations: An Overlooked Factor in the Decline of Anammox Granular Activity for Treating Sulfate-Rich High-Salinity Wastewater 0.56
Dual Roles of Phenolic Groups in Pyrogenic Carbon as Mediators and Quenchers for Hydroxyl Radical Production 1.00
Breaking the Humidity Barrier in Ozone Decomposition: Dual-Engineered Mn–Co Catalyst with Vacancy-Orbital Synergy 1.00
Bioinspired Dual-Electric-Channel Membrane for Efficient Photothermal Evaporation and Ion-Selective Crystallization 1.00
Novel Insights into the Spatiotemporal Variation of Tap Water Quality and Disinfection Byproducts with Implications for Cancer Risk in Zhejiang, China 1.00
Perfluorooctanoic Acid Can Increase Biofilm Resilience and Virulence in Drinking Water Distribution Systems 0.83
Comparison of Halophenol, Halonitrophenol, and Halosalicylic Acid Formation vs 1–2 Carbon DBP Formation during Chlorination and Chloramination of Surface Waters 0.25
Full-Process Self-Enhancing Solar-Driven Water Production Enabled by a Wavelength-Anisotropic Conductive Interface 1.00
Synergistic Closed-Loop System for Oily Sludge Valorization via Biomass-Assisted Pyrolysis: Bridging Waste Management to Sustainable Soil Revitalization 1.00
Oxygen Vacancies Engineering of Co3O4 to Modulate the Adjacent Environment: Boosted Singlet Oxygen Generation in Peroxymonosulfate-Mediated 2-Chlorophenol Degradation 1.00
Harnessing Fe–Mo Atomic Interfaces for Boosted Electron Transfer and ROS Generation in Sustainable Pollutant Degradation 1.00
Inherent Persistent Free Radicals in Nonextractable Contaminated Soil Residue Driven Nontarget Reactions and Phenolic Polymerization in H2O2-Based in Situ Remediation 1.00
Nontarget Discovery of an Emerging Class of Chlorobenzenediol DBPs in Chlorinated and Chloraminated Drinking Water with High Developmental Toxicity 0.36
Mechanistic Insights into Salt Resistance of Commercial Ozone Catalysts for Hypersaline Wastewater Decontamination 1.00
MnO2 Crystal Phases Mediate o-Semiquinone Radical Generation for Selective Aniline Contaminant Oxidation 1.00
Single-Atom Copper@Carbon Nanospheres for Catalytic Ozonation: Parallel Dual Surface Oxidation Pathways for Broad-Spectrum Water Pollutant Removal 0.60
Activation of Chlorite with Sunlight for the Efficient Disinfection of Antibiotic-Resistant Bacteria: the Overlooked Contribution of Cytomembrane-Bound Chlorite 1.00
Double Nanofoaming Enhanced Interfacial Polymerization toward Ultra-High-Performance Nanofiltration Membranes 0.71
Microorganisms Enhance Denitrification of Low Carbon-to-Nitrogen Ratio Municipal Wastewater and Reduce N2O Emission: Metabolites Promote Carbon Flux to Nitrate Bioreduction 1.00
Optimizing Small Water Bodies as a Nature-Based Solution for Mitigating Nitrogen Pollution 1.00
Insights into Fouling Control of the Salt-Responsive Membrane across the Entire Filtration–Backwashing Cycle 1.00
Thermodynamic Modulation by Micro-Nanobubbles Stimulate Hydroxyl Radical Production during O2 Reduction by Aqueous Fe(II) for Sustainable Water Remediation 1.00
From Visualization to Mechanism: Uncovering Early Fouling Dynamics in Nanofiltration through LIF Experiments 1.00
Photoswitching-Modulated Interfacial Electron Transfer in Single-Atom Co-TiO2 for Enhanced Pollutant Mineralization in Persulfate-Based AOPs 1.00
Deciphering the Effects of Quenching on the Chemodiversity of Low- and Non-volatile Disinfection Byproducts in Drinking Source Water Using ESI(−)-FT-ICR MS 1.00
Selective Transport Energy Barriers in Chitin-Assisted Polyamide Membranes for Efficient Clsup–/sup/SOsub4/subsup2–/sup Sieving 0.72
Overcoming the Catalytic Activity–Stability Trade-Off by an Electrified Chainmail Membrane Composed of Copper Nanowires Encapsulated by Reduced Graphene Oxide 1.00
Fully Amorphous Cerium/Carbon-Doped Manganese Oxides with Tailor-Made Pore and Electronic Properties for Superior Catalytic Ozone Decomposition 1.00
Identification, Formation, and Toxicity of Haloimidazoles as Emerging Nitrogenous Aromatic Disinfection Byproducts in Drinking Water 1.00
Elucidating the Underestimated Role and Microscopic Mechanisms of Kaolinite in Oxyanion Retention: Insights from DFT Calculations and Surface Complexation Modeling 0.80
Resolving Hydraulic Resistances in Thin-Film Composite Polyamide Nanofiltration Membranes 1.00
Iodine Species Quantification and Transformation during Chlorination in the Presence of Ammonia 0.70
Characterization of the Degradation and Nitrogenous Disinfection Byproduct Formation of Nitrogen-Containing Benzoheterocyclic Compounds during the UV-LED (275 nm)/Chlorine Process: Roles of Reactive Species and Pathway of Dichloroacetonitrile Formation 1.00
Machine Learning-Assisted Prediction of Mercury Removal Efficiency of Carbon-Based Adsorbents 1.00
Sustainable Electro-Fenton Antifouling Strategy Simultaneously Improves Nitrogen-Removal Efficiency of Anammox in Membrane Bioreactors 1.00
Triplet-Excited Benzoates Significantly Enhance HO• Formation and Free Chlorine Decay in a UV222/Chlorine Advanced Oxidation Process 1.00
Temporospatial Confined Catalytic Membranes with Controlled Diffusion-Reaction for Ultrafast Water Purification 1.00
Local Acidic Microenvironment Construction via Alternating Current Electro-Fenton Process for Green Efficient Water Purification under Neutral Conditions 1.00
Niche Adaptation of Ammonia-Oxidizing Bacteria iNitrosomonas/i in Partial Nitrification System: Keystone Species and Unique Survival Strategies 1.00
Machine Learning-Assisted Discovery of Bimetallic Oxides for Highly Efficient Catalytic Ozonation 1.00
Janus Electrocatalytic Membrane Enables Tunable Redox via Sequential Tactics toward Ultrafast Water Decontamination 1.00
Aliphatic Disinfection Byproducts Induced Antibiotic Resistance in iEscherichia coli/i through Cell Wall Alteration 1.00
Key Factors Controlling Remediation of Organic Pollutants in Synergistic Electric Field CaO2/Fe(II) Fenton-Like Systems 0.90
Enhanced Photolysis of Sulfite by Far-UVC (222 nm) and Efficient Photoreductive Degradation and Dehalogenation of Halogenated Organic Pollutants 1.00
Smart Membrane with Reversible Superwetting Transition for On-Demand Antifouling and Self-Cleaning 1.00
Benzoic Acid-Mediated Oxygen Activation for Efficient Toluene Removal on the Co-Vo-Cu Catalyst via In Situ Ligand Modulation 1.00
Regulating Chlorine Activation Pathways via Triphase Photothermal Catalysis for Enhanced Removal of Emerging Contaminants and Control of Disinfection Byproducts 1.00
Revealing the Role of Molecular Functionality in Regulating Antiscalant Efficiency for Mitigating Silica Scaling during Membrane Distillation 0.33
Efficient Polymerization Removal of Phenolic Pollutants by In Situ-Formed Iron-Complexes in Thermally Activated Peroxydisulfate Systems 0.83
Interaction of Layer-by-Layer Nanofiltration Membranes and PFAS: Filtration after Adsorption 1.00
Quantitative Profiling of Elementary Reaction Steps in Sulfate Radical-Based Treatment Processes: A Two-Loop Self-Consistent Approach 0.67
Stabilizing Ru-Based Catalysts against Bromine Poisoning through Ru–O Covalency Regulation for Durable Brominated Volatile Organic Compound Oxidation 1.00
Enhanced Thin-Film Composite Nanofiltration Membranes via Substrate Pore Structure Engineering: Performance and Mechanistic Insights 1.00
Rationally Engineered CuSO4/TiO2 with Cl Desorption and Intermediate Rapid Oxidation Dual-Reaction Channels for Efficacious 1,2-Dichloroethane Deep Destruction 1.00
Unveiling the Hidden Role of Feed Spacer Filament Microstructure in Membrane Fouling 1.00
In-Situ Formed Zr-Phosphonate Surface Complex Promotes Peroxymonosulfate Activation of Single-Atom Cu for Efficient Phosphonate Oxidation 0.86
Enrichment and Kinetic Profiling of Candidatus Nitrospira nitrosa Culture Reveal Mechanisms Underlying Its Prevalence in Wastewater Treatment Systems 0.89
Electrocatalytic Hydrogenation of Bioinhibiting Aromatics to Bioavailable Aliphatics for Wastewater Denitrification Enhancement 1.00
Revealing Wetting Patterns of Porous Hydrophobic Membranes for Desalination Using Electrochemical Impedance Spectroscopy 0.30
Direct One-Electron-Transfer-Mediated Oligomerization in Electrochemical Membranes Drives Eco-Friendly Removing Halogenated Aromatics 1.00
Characteristic Fragment-Based Nontarget Identification of Thiol-Reactive Compounds in Disinfected Wastewater Using High-Resolution Mass Spectrometry: Focus on α,β-Unsaturated Carbonyls 0.92
In Situ Elimination of Water Disinfection Byproducts in the UV/Chlorine Process by Introducing a Faceted Photocatalyst 1.00
Reductive Control of Refractory Contaminants in Water by Far-UVC Photolysis of Sulfite 1.00
Highly Energy-Efficient 3D-Printed Solar Evaporator with Integrated Salt Self-Collection for Zero Liquid Discharge Desalination 1.00
Excited Triplet Humic Acid Boosts UVA-Activated Periodate (PI) Oxidation Process for Enhanced Micropollutant Degradation 1.00
Simultaneous Pollutant Removal and Ag Recovery in an Expanded Water Self-Purification System by Mo–Sn Quantum Dots 1.00
Isolating the Salt and Oil Discharging Area Enables the Continuous and Effective Purification of Saline Oily Wastewater 1.00
Electro-Dialysis-Reduction-Enabled Synergistic Nitrate Enrichment and Conversion for Wastewater Valorization 1.00
Enhanced Electric Field via Multicomponent Synergistic Coordination on Single-Atom Catalysts for Antibiotic Mineralization in Water 1.00
Synergism between Activated Carbon and Fenton Reaction for Organic Pollutant Degradation: The Hitherto Overlooked Role of Dynamic Single-Atom Sites 1.00
Surface Coordination and Radical Binding Induce Efficient Decomposition of Chlorinated Organophosphate Flame Retardants during Catalytic Ozonation 1.00
Comparative Nontargeted Analysis and Toxicity of Brominated Disinfection Byproducts from Chlorination and Chloramination of Natural Organic Matter 1.00
Carbon Atom Doped Pt Active Sites Enable Highly Active and Stable Catalytic Oxidation of Ethylene at Low Temperatures 1.00
Mechanistic Insights into the Contrasting Effects of Low DO on Nitrification-Derived N2O Emissions in Comammox Nitrospira- versus AOB-Dominated Sludge 1.00
A Novel Electrocatalytic Oxygen-Superoxide Pathway Driven by an Auxiliary Ligand-Engineered Nonheme Iron Catalyst for Highly Efficient Hydroxyl Radical Generation in Water Purification 1.00
Abiotic Attenuation of Nitrobenzene Controlled by Reduction Capacity Shifts during Fe(II)aq–Catalyzed Ferrihydrite Transformation 1.00
Mechanistic Insights into Mitigation of Combined Scaling–Biofouling for a Novel Thin-Film Composite Membrane Based on Incorporated Defensive–Offensive Strategy 1.00
Interface-Facilitated Removal of Environmental Micropollutants by Nanofiltration Membranes Prepared from Amino Acid-Mediated Interfacial Polymerization: Mechanistic Insights into Micropollutant Interfacial Partitioning Regulation 1.00
Short-Chain Carboxylic Acids Influencing Mineralization Mechanisms of Ferrihydrite Transformation to Hematite and Goethite 1.00
Chlorine-Mediated Ammonia and Organics Transformation during Electrochemical Ammonia Recovery from Human Urine 1.00
Anti-degradation Biphasic Absorbent for Efficient and Stable CO2 Capture 1.00
Anions-Impacted Water Purification from a Dual-Substrate Perspective 1.00
Elucidating Solvation Effects in Reactive Halogen Species-Initiated Ammonium Oxidation 1.00
Unlocking Hydrogel-Based Desalination with Ammonia Gas Dewatering 0.64
Anode–Cathode Synergistic Filter Activating Peroxymonosulfate at Multiple Active Sites for Highly Efficient and Economical Water Purification 1.00
Acid Sites Cleavage of Surface-Frustrated Lewis Pairs for Small-Molecule Activation of Mixed Volatile Pollutants 1.00
A Scalable One-Step Method for Synthesizing Durable Defect-Minimized Graphite-Metal Catalysts for Sustained Engineering Applications 1.00
Hydrolytic Dehalogenation of Toxic Haloacetic Acids via Carbon Metabolism Regulation during Microbial Denitrification 0.89
Direct Quantification of Ion Partitioning and Diffusion Resistances in Reverse Osmosis Membranes via Electrochemical Impedance Spectroscopy 0.83
Machine Learning Reveals Key Adsorption Mechanisms for Oxyanions Based on Combination of Experimental and Published Literature Data 1.00
Scalable Production of Hygroscopic Gel Spheres to Enhance Seedling Growth via Atmospheric Water Harvesting and Controlled Fertilizer Release 1.00
Tailorable Dual-Redox Polymer with Molecular Flexibility for Enhanced Electrochemical Desalination and Water Purification 1.00
Boosting the Photothermal Oxidation of Multicomponent VOCs in Humid Conditions: Synergistic Mechanism of Mn and K in Different Oxygen Activation Pathways 1.00
Gradient-Pore-Engineered Janus Membranes for Sequential Molecular Sieving in Membrane Desalination 1.00
Immobilizing Electron Shuttles into van der Waals Heterostructures for Boosted Fenton-like Reactions 1.00
Enhancing Urea Recovery and Hydrolysis Inhibition from Source-Separated Urine through a Novel Urea Electric-Assisted Forward Osmosis System: Insights from Reaction Kinetics and Mechanisms 1.00
Regulation of Surface Terminal Hydroxyl Coverage of FeOCl Catalyst via Crystal Facet Protection for Enhanced H2O2 Activation 0.89
New Insights into Natural Polyphenol-Enhanced Fe(III)/Peracetic Acid System under Acidic pH Conditions: The Overlooked Role of Coexisting Hydrogen Peroxide 1.00
Enhanced Pore Structure of Powdered Activated Carbon Can Boost Its Performance in Catalyzing Mn(II) Oxidation by Chlorine 1.00
Design Ultrathin Polyamide Membranes against Funnel Effect: A Novel Zone-of-Influence-Based Approach 0.92
Nontargeted Analysis Reveals Organofluorine Pharmaceutical Compounds Responsible for Formation of Toxic Disinfection Byproducts in a Drinking Water Treatment Plant in China 0.88
PPS Gradient Filter Material with High Efficiency and Excellent Dust Removal Capacity for Industrial Flue Gas Treatment by Integrating Numerical Modeling and Melt-Blown-Lamination Technology 1.00
Mild Tuning of the Microbial Habitat via Titanium-Based Pre-coagulation Mitigates Reverse Osmosis Membrane Fouling 1.00
Direct Nano-Imaging Reveals the Underestimated Role of Lanthanum Phosphate Formation in Phosphorus Sequestration by Lanthanum Carbonate 1.00
Deciphering Mechanisms of Silica-Metal Scaling on RO Membranes via 3D Structural and Compositional Analysis 1.00
Concentration of High-Salinity Brine Using Single-Stage Membrane Capacitive Deionization 1.00
Flexible Carbon Source Regulation for Mitigating Greenhouse Gas Emissions in Full-Scale Wastewater Treatment 1.00
Direct Electrosynthesis and Separation Platform for Chlorine from Saline Water 0.31
Tailoring Dual High-Valence Cu–O–Mn Active Sites to Enhance VOC Catalytic Oxidation 1.00
Upcycling End-of-Life Polyvinylidene Fluoride Membranes into Reverse Osmosis Membranes for Sustainable Water Purification 1.00
Overlooked Role of Iodate in Micropollutant Degradation by UV/Periodate: Kinetic Modeling and Mechanism 0.75
Solar-Induced Phototransformation of Peracetic Acid in Chromophoric Dissolved Organic Matter Solutions 1.00
Intensified Enrichment and Leaching Strategy of Phosphorus in Sewage Sludge via Species-Targeted Conversion 1.00
Machine Learning-Assisted Molecular Structure Embedding for Accurate Prediction of Emerging Contaminant Removal by Ozonation Oxidation 1.00
5 4.38
Mechanistic insights into quinone-enhanced hydroxyl radical production during the oxygenation of Fe(II) minerals 1.00
Molecular-scale insights into surface-induced cobalt precipitation on palygorskite: roles of pH, metal concentration, and mineral template 0.63
A bacteriohopanetetrol stereoisomer in Western Pacific oxycline indicates anammox-driven nitrogen loss and warm eddy dynamics 1.00
Revealing the reaction pathways of reactive oxygen species anaerobic generation at pyrite-water interface using the ReaxFF force field 1.00
Stable Mo isotopic fractionation during complexation onto hematite surface: Molecular insights from Ab-initio MD and X-ray absorption spectroscopy 0.75
49 47.29
Molecular-Bridge-Directed Thermal Reconstruction of Semiconfined Fe-Based Sites in Dual-Carbon Matrix Enabling Long-Term Zinc-Air Batteries 1.00
Defect-Engineered MOF for Wide-Temperature Quasi-Solid-State Electrolyte with High Comprehensive Electrochemical Performance 1.00
Regulating Radical–Nonradical Pathways via Phosphorus-Engineered Cobalt Nanocatalysts for Fenton-Like Oxidation 0.90
Constructing an Electron–Ion Dual-Conductive Network via MXene Shell for Stable Aluminum Powder Anodes in Aqueous Batteries 1.00
Ammonia-Etched High-Entropy Prussian Blue Analogues Enabling Accelerated Zn2+ Transport for Aqueous Zinc-Ion Storage 1.00
Ionic Energetic Coordination Polymers (IECPs) as a Structural Motif for Ammonium Perchlorate Catalytic Thermal Decomposition 1.00
Ordered Proton Transport Channels in a Layered Host–Guest Crystal for High-Performance Fuel Cells 1.00
Nickel Cluster-Based Organic Framework-Functionalized Solid-State Electrolyte for Lithium–Metal Batteries 1.00
Engineering Cooperative Microenvironments in a Nitro-Functionalized Trinuclear Copper Metal–Organic Framework for High-Efficiency Heterogeneous Catalysis 1.00
Chemical Interaction Customized Metal–Organic Framework Enables Regulated Conductive Network for Selective Superionic Conduction in Solid-State Batteries 1.00
Critical Concentration Effect in NaCl–NaI Molten Salt: A DPMD Study of Structural and Transport Properties 1.00
Eucalyptus Charcoal-Supported Single-Atom Ir Catalyst for Hydrodeoxygenation of Furfural: Role of Water-Assisted Pyrolysis 1.00
Machine-Learning and Atomic-Scale Mechanistic Insights for Designing Gradient Porous MOF-Derived Carbon Electrodes 1.00
Synchronously Tuning Crystal Facets and Constructing a Multifunctional Interface toward a High-Performance Zn Anode 0.93
Complexes with 5-Nitro-3-(Trinitromethyl)-1H-1,2,4-Triazole as the Oxygen Supply System: A Series of Core–Shell-Like Energetic Complexes with High Oxygen Content and Low Mechanical Sensitivity 1.00
Collaborative Interface Engineering of the WO3–MoO3 Heterostructure Enabling Accelerated CO2 Cycloaddition with Epoxides 1.00
Mixed-Valence CuI/CuII–EuIII Heterometallic Framework for the Synthesis of α-Alkylidene Cyclic Carbonates from Flue Gas-Level Dilute CO2 1.00
Selective Depolymerization of Polyurethanes into Borylated N,N′-Dimethyldiamines Mediated by Supported Lanthanum Complex La(CH2C6H4NMe2-o)3@SBA-15 1.00
Lewis Acid–Base Dual Sites for Stabilizing Li–S Batteries: A Guideline for Doping in p-Block Atoms 1.00
Synergistic MOF-on-MOF Integration for Enhanced Energy Storage Performance 1.00
Multilayer Zn/Cu Oxides Derived from Zn/Cu-BDC Solvent-Exchanged by Alcohols with Different Molecular Sizes: Characterization and Photocatalytic Performance 1.00
Energetic Polymeric Complexes Based on 1-Methyl-5-Aminotetrazole and Dicyanamide for Catalysis on the Thermal Decomposition of Ammonium Perchlorate 1.00
Synergistic Regulation of Polysulfide Shuttle and Lithium Dendrites via Ce-Doped ZIF-8 Based Separators for High-Performance Li–S Batteries 1.00
Bimetallic-Tetrathiafulvalene Metal–Organic Frameworks: Finely Tailoring Crystal Morphologies and Enhancing Positrode Performance of Supercapatteries 1.00
Morphology-Dependent Cu+ Stabilization and Metal–Support Interactions Govern Catalytic Transfer Hydrogenation of Furfural over Cu/CeO2 1.00
Anion-Engineered Energetic Cu(II)-Based Complexes to Balance High Energy and Low Sensitivity 1.00
In Situ Polymer-Integrated Metal–Organic Framework for Solid-State Electrolyte Membrane 1.00
Dual-Ion Metal Electrolyte Additives Regulate the Interfacial Reaction of Zinc Anodes 1.00
Energy-Saving Hydrogen Production from Electrocatalytic Oxidation of Urea in Seawater over Mixed-Linker Mn1–xCox Metal–Organic Frameworks with Open Metal Sites 0.14
A Charge-Transfer Salt Featuring a High-Entropy and Plastic Crystal 1.00
Precise Modulation of Zeolite Acidity by Alkali Metal Ions for Enhancing Catalytic Performance in CO2 Cycloaddition Reactions 1.00
Engineering Brønsted Acidic Microenvironments via Strong Metal–Support Interaction in Single-Atom Pd1/CeO2 for Acid-Free Acetalization Catalysis 1.00
Pseudo-Jahn–Teller Effect-Regulated Structural Distortion in WNb12O33 Triggering Highly Stable and Fast-Charge Lithium Storage 1.00
Predicting Dinitrogen Activation and Coupling with Carbon Dioxide and Other Small Molecules by Methyleneborane: A Combined DFT and Machine Learning Study 1.00
Enhanced Oxygen Ion Conductivity and Ionic Conduction Mechanistic Visualization in Tetragonal Zircon-Type Pr1–xSrxVO4–0.5x 0.86
Comparative Study of Catalytic Oxidation of Toluene over Porous Metal Oxide Catalysts Derived from (Mn, Ce, Co)-MOFs 1.00
Designed Synthesis of Co2VO4 Nanodiscs with Large Aspect Ratios To Achieve a High-Capacity Enhancement of 20.2% for Photorechargeable Zinc Ion Batteries 0.71
Photocatalytic Oxidation of Tetrahydro Furfuryl Alcohol over Bimetallic Synergistic Pd-Sm-Porphyrin Metal–Organic Framework under Visible Light 1.00
Hierarchical Phosphorus–Carbon Microarchitectures for Robust and Secure Lithium-Ion Storage 1.00
Catalytic Effect of Pd0 NPs Encapsulated in UiO-66(Zr) under Microenvironment Modulation for the Degradation of Trimethoprim in Fenton-like Reaction 1.00
Degradation of Organophosphorus Pollutants into Inorganic Phosphates by Co(II)/NaBO3 System and Its Phosphorus Recycling 1.00
Insight into the Mechanism of α-, β-, γ-, and δ-MnO2 in Catalyzing Ammonium Perchlorate Decomposition: Superoxide Promotion (SOP) Effect 1.00
Enhanced Formic Acid Dehydrogenation over Basic Site-Rich Pd/Al2O3 Hollow Sphere Catalyst 1.00
Visualization of Co–O/N Sites under a Confined Combustion Strategy for Oxidation Reactions 1.00
Rational Design of a Heterometallic Framework as a Highly Active Catalyst for Green Fixation of CO2 under Moderate Conditions 1.00
Sulfur-Driven Structural Reinforcement for Long-Life Zn-Ion Storage 0.75
Unraveling the High Catalytic Performance of Three-Dimensional Urchin-like CoNi/NF for Toluene Oxidation: Role of Microstructure and Redox Properties 1.00
Broadband Microwave Absorption of Nb2CTx Nanosheets by a One-Step Hydrothermal Method 1.00
Electroreduction Mechanism of UO2Cl2 and Nucleation and Morphology of Uranium Dioxide at Different Conditions 1.00
233 226.16
Ammonium recovery from wastewater for LiFePO4 synthesis: From pollution to energy storage materials 0.94
Achieving “one stone, three birds”: A solid-waste steel-slag-derived system for synergistic antibiotic degradation and CO2 capture 1.00
Multiscale thermal response and hazardous hydrocarbon gas evolution during low-temperature coal oxidation in sealed fire zones 1.00
Optimization of reversible solid oxide fuel cells for enhanced dual-mode operation: a multi-objective approach using NSGA-II algorithm 1.00
Supercooled sodium acetate trihydrate-erythritol eutectic phase change composites for all-weather photovoltaic thermal management 1.00
Environmental impact re-evaluation of coal-fired district heating systems from the marginal life cycle perspective 0.83
Mapping the influence of plastic feedstock characteristics on product selectivity from the co-pyrolysis with waste cooking oil for sustainable aviation fuel -range aromatic hydrocarbons 0.86
Circular valorization of waste tires using spent fluid catalytic cracking (sFCC) catalyst: sustainable aromatic upgrading and sulfur immobilization 1.00
Comprehensive experimental evaluation of waste tire pyrolysis: Interplay between reaction conditions, aromatic pathways, and sulfur fixation 1.00
Electro-activation of peroxymonosulfate for degradation of doxycycline using Cu-activated carbon fiber recovered from Cu-containing wastewater 1.00
Palladium recovery from wastewater using electric field-enhanced ultrafiltration assisted with polyethyleneimine and electro-decomplexation/electrodeposition 1.00
Endogenous organic matter of anaerobic sludge as a recyclable carbon source for anammox process: in situ enrichment and ingredient differences 1.00
A rigorous performance evaluation of MDEA/nanofluid solutions for enhanced CO2 capture in cleaner energy production 0.50
Orbital-directed electron compensation unlocks trace antibiotic elimination via cooperative metal-nonmetal centers 1.00
Pathways for clean and low-carbon transition in coal-rich countries: A coal-based integrated energy system scheme featuring co-production of cooling, heating, power and chemicals 1.00
Combining riverbank filtration with membrane filtration for drinking water purification: Antibiotic resistance genes control and biofilm response 1.00
Fluorine-free and sustainable synthesis of Ti3C2Tx MXene via chelation-assisted alkaline etching for environmental sensing and photothermal applications 1.00
Mechanisms and risk implications of spontaneous combustion in backfilled coal gangue driven by mine water seepage 0.83
Advancements in production of vanadyl sulfate-chloride electrolyte for VRFBs via biochar-modified enrichment and chlorination distillation purification 1.00
A novel UV-assisted modification for fabricating wrinkled ligninsulfonate nanofiltration membranes with high flux and antibacterial properties 1.00
Reverse swirl flow-based enhancement of carbon dioxide capture with monoethanolamine-blended amines: Reactor design, performance characteristics, and process mechanisms 1.00
Synchronous mechanochemical remediation of petroleum-contaminated soil and attapulgite-biochar composite for enhanced Cr(VI) removal from water 1.00
Closing the circle: Reuse of wastewater from production of layer-by-layer nanofiltration membranes 1.00
Green purification of FCC slurry oil to ultra-low ash via acid-modified biomass filter 1.00
Pre-cultivation of nitrifying biofilms for rapid start-up of biofilm reactors: Manipulation by the biocarrier packing mode and fluid conditions 1.00
Tailoring hydrogen bond acceptors in deep eutectic solvents for efficient hydrothermal production and biphasic recovery of 5-methylfurfural from waste activated sludge 1.00
Single-atom calcium catalysts with C-N-Ca coordination improve the efficiency of preparing olefins from plastics 1.00
Strategy for optimization of auto-driven electrochemical module towards phosphorus recovery from wastewater: Performance and mechanism of electric field regulation 1.00
Biochar from wet-process phosphoric acid in-situ modified bagasse for Cr (VI) removal 1.00
“Two-in-one” luminescent MOFs/sodium alginate aerogel beads for sensitive detection of Al3+ and efficient enrichment of Pb2+ in water 1.00
Revisit the improvement of coagulation pretreatment on ozonation performance: The critical roles of HO• and O3 for effluent organic matter transformation and micropollutant degradation 1.00
Multisource data fusion framework reveals multi-scale spatiotemporal dynamics of anthropogenic CO2 emissions in China 1.00
Structural optimization of a magnetized water spray dust reduction device based on orthogonal experimental design 1.00
New insights into divalent metal ions removal by sludge-derived porous carbon: Thermal evolution and synergistic adsorption at multi-active sites 1.00
Sustainability analysis of seawater desalination: assessing the social, economic, and environmental impacts of membrane and thermal technologies 1.00
Experimental study on material transformation and energy utilization in the high temperature purification of coal 1.00
Performance analysis of a large-displacement hydrogen direct injection engine designed for zero-carbon heavy-duty truck 1.00
Removal of high-risk organic recalcitrants in reverse osmosis concentrate by solar/ZnO: performance, mechanism, and application 1.00
Decoding the mechanisms of bio-accelerants in low-temperature nitrogen removal: A comparison of basic, quinone, and molybdenum types 1.00
Double-Janus solar interface evaporator based on three-dimensional knitted structure for high-efficiency seawater desalination 1.00
Novel perspective on membrane fouling mitigation in pre-oxidation–ultrafiltration processes for surface water treatment: Unexpected role of isolated catalyst particles 1.00
Enhancement mechanisms of bio-promoter on denitrification system against flow fluctuations: metabolic regulation, antioxidant defense and microbial community reconstruction 1.00
Co-treatment and resource utilization of stainless-steel pickling sludge and Zn-bearing dust via direct reduction by petroleum coke 1.00
Autothermal hydrogen production from wood biomass based on low-temperature alkaline glycerol pretreatment synergized with efficient heat storage media 1.00
Hydrogen evolution behavior and morphology regulation of electrowinning of iron in acidic sulfate system 0.88
Urea-tailored biochar activated peroxydisulfate for carbazole degradation: An electron transfer process from in-plane to out-of-plane 1.00
Autotrophic denitrification driven by selected pyrite: Microbial–Mineral synergistic mechanisms 1.00
Unravelling phosphorus mobilisation from sludge incineration ash: Organic-iron-phosphate complexation and aqueous speciation 1.00
Green glyphosate degradation via selectively cleaving C-N bonds in antibiotic residue biochar-activated peroxydisulfate systems 1.00
α-Fe2O3-regulated reactive free radicals generation in NaClO oxidation system for efficient remediation of PAHs-contaminated industrial site soil 1.00
Granular sludge-based partial denitrification/anammox achieving high anammox contribution for nitrogen removal from municipal wastewater using anoxic/aerobic process with independent sludge system 0.64
Two-phase reaction characteristics in hybrid filtration combustion reactor gasification: Syngas ratio control through steam-oxygen balance 0.83
Selective molecular oxygen activation via electron transfer modulation in nZVI/TpPa-1 for doxycycline hydrochloride degradation 1.00
Novel insight into the investigation of CO2 capture performance of secondary amines based on quantum chemical calculations coupled with machine learning methods 1.00
Photothermal metal organic framework@wood evaporator with honeycomb structure for efficient solar-driven freshwater and high-value chemical production 1.00
Alternating magnetic field-augmented solar evaporation in 3D magnetic porous architectures for enhanced interfacial water evaporation 1.00
Process for resource-based preparation of soda ash from waste sodium sulfate based on double displacement reaction: Optimization using response surface methodology 1.00
Gas-solid-liquid three-phase interface modulated ROS generation over a floatable S,N-CaZn2(BO3)2 for enhanced water disinfection 1.00
The potential of mixotrophic denitrification for N2O mitigation: Insights from the perspective of electron distribution 0.88
A wind energy-biomass-coal synergistic system for producing multiple products based on the carbon and nitrogen cycles and its optimization 1.00
Effects of biochemical component interactions on molecular transformations in bio-oil during microwave-assisted pyrolysis of protein-rich biomass 1.00
Can membrane aerated biofilm reactor (MABR) realize more efficient simultaneous partial nitrification and denitrification than conventional biofilm under low COD/N? 1.00
Normal pressure transforming kaolinite-rich soil into sodalite for Cd-contaminated soil remediation 0.83
Coordination regulation of non-radical high-valent cobalt-oxo species for simultaneous removal of antibiotics and antibiotics resistance bacteria 1.00
LSTM-CNN-CBAM-based prediction of NOx emissions with zonal control strategies for flexible peak-load NOx reduction in CFB coal-fired units 0.88
3D-printed fish-scale dam-like structured photothermal evaporators based on thiol-ene click chemistry for solar-driven freshwater production and salt recovery 1.00
Fast water purification through sea cucumber-inspired hierarchical network 1.00
Effect of palladium loading on catalytic performance and product selectivity during diclofenac degradation by Pd0@anaerobic activated sludge 1.00
An enhanced sorting method for second-life lithium-ion batteries based on two-step clustering 1.00
Co-pyrolysis-to-co-gasification continuum of Pennisetum hydridum and waste tires: Temperature/atmosphere/synergy characterization of tar/char/gas products 0.92
Experimental and numerical study on oxygen-enriched NH3/H2/CO/air premixed combustion at elevated temperature and pressure 1.00
Synergistic hydrogen and electricity co-production via a decoupled amphoteric water electrolysis system integrated with a phenazine-based Zn battery 1.00
Divergence in immobilization pathways of Pb and Zn from zinc leaching residue in ceramic tiles: Selective crystallization and solid solution mechanisms via DFT 1.00
Sustainable valorization of crustacean wastes into N-doped porous carbon via synergistic bio-template and green activation for efficient CO2 capture 1.00
Enhancing anaerobic digestion of sulfate-containing organic wastewater through an innovative integration of nitrate addition and microaeration 1.00
Multi-step battery temperature prediction for electric vehicles: Vehicle identification-driven long short-term memory neural networks based on real-world charging pile data 1.00
Anaerobic granular sludge as a multifunctional carrier for enhanced partial nitrification: Effective nitrite-oxidizing bacteria suppression and in-situ nitrate removal 1.00
A novel mainstream application of aerobic granular sludge for nitrite supply to Anammox: insights from granule size and microbial stratification 1.00
Enhanced membrane antifouling performance via interfacial hydroxide ions mediated pore contraction for efficient oil-water separation 1.00
Revealing fine-scale carbon disparities using daily CO2 emissions estimated from plant-level NOx monitoring data 1.00
Effects of absorbent physical properties on microscale hydrodynamics in structured packing for CO2 capture and new correlations for interfacial area and liquid holdup 1.00
Sensitivity analysis of design variables in semi-batch reverse osmosis for energy-efficient water treatment 0.79
Unlocking the potential of pyrite by mechanochemistry ball mill for efficient heterogeneous Fenton degradation of florfenicol 1.00
Techno-economic and environmental assessment of an efficient green methanol production system based on biomass gasification and carbon capture 0.93
Hybrid PVT-PVSFs powered desalination system with phase change material thermal energy storage: Dynamic simulation in an actual weather condition for sustainable off-grid freshwater production 1.00
Seawater-derived struvite fertilizers: Agronomic potential and environmental benefits in aquatic plant cultivation 1.00
Synergistic pyrolysis of concentrated seawater and agricultural waste for phosphorus recovery and release from wastewater: A multi-fold resource utilization strategy 1.00
Air-source high-temperature heat pump systems for zero-carbon parks: Performance and application 1.00
Enhanced phosphorus release and sludge reduction via a novel worm reactor: Process optimization and mechanisms 1.00
Staged pyrolysis of corn cob to improve the production of glycolaldehyde, acetic acid, and acetol 0.89
Degradation of organic refractory contaminants by phosphate buffer activated peroxymonosulfate: The overlooked roles of oxygen reactive species 1.00
Electromagnetic one-pot fabrication of flexible monolithic catalysts with boosted oxygen vacancies for enhanced VOCs oxidation 1.00
Stepwise pyrolysis of biodiesel-derived oil sludge: Product distribution, sulfur/nitrogen release, and resource recovery 1.00
Sustainable ethylene production: A life cycle perspective on oil, coal, and natural gas derived industrial pathways in China 1.00
On-demand thermal regulation and water harvesting via liquid metal-infused bio-inspired microchannel architectures 1.00
Heavy metal removal efficiency in tailings through washing: Prediction and optimization 1.00
Electrokinetic dual-cathode permeable reactive barrier system: Efficient Cr(VI) removal and Cr(III)/Fe(III) resource recovery from contaminated soil 1.00
A new application of algae-grass biomass within watersheds: Employing hydrochar to control dye pollutant emissions 1.00
Crafting advantageous root traits by combining root restriction and dry-wet circulation to enhance rhizosphere effect and pollutant removal in constructed wetlands 1.00
Cascade biorefining of tobacco waste: co-production of aroma extracts, photo-fermentation biohydrogen, and biogas 1.00
Non-conventional thermal treatment of organic hazardous waste: Conversion to high-energy materials via molten sucrose system 1.00
Synergistic extraction-flocculation system enables closed-loop recovery of dyes, salts and thermal energy from textile wastewater 0.83
Mild extraction of PdAg precious metal components and efficient recovery of Al2O3 supports from spent acetylene hydrogenation catalyst 1.00
Molten Li/Na/K ternary carbonate salt pyrolysis of biomass: A facile approach for co-production of porous biochar, CO-enriched syngas, and high-selectivity bio-oil 1.00
Natural fiber-supramolecular hydrogel evaporator strategy for efficient solar desalination to produce freshwater 1.00
Photo-responsive imprinted cellulose nanocrystalline aerogels for selective terbium recovery and controlled desorption 1.00
Electrochemical detection and electro-Fenton degradation of fipronil via Fe/Ni-BTC/MS-derived NiFe2O4@C core-shell catalyst 1.00
Enhancing nutrients recovery from source-separated urine through a novel bioelectrically assisted forward osmosis coupled with gas permeation membrane system: reaction kinetics and mechanisms 1.00
Full-chain analysis of biogas-to-hydrogen (BTH) process: Integrating advanced catalysis, multi-scale process modeling and techno-economic analysis for industrial implementation 1.00
CoFe@NiFe-LDH/CC bifunctional electrode: Mechanism and reactive oxygen species generation in the synergistic anodic oxidation and electro-Fenton processes 1.00
Constructing ferrihydrite confined in 3D boron-doped network biochar: simultaneous adsorption and oxidation of As(III) and tetracycline 1.00
Role of carbonate in light-driven periodate activation for efficient tetracycline abatement 1.00
Enhanced degradation of carbamazepine in water by a chitosan-supported tea polyphenols/nano-zero-valent iron system: Mechanistic insights and toxicological risk assessment 1.00
Insights into the cold adaptability, nitrogen, and phosphorus metabolism mechanism of active sludge in response to low temperature (4 °C) 1.00
Effects of different soil warming strategies on the water quality purification and greenhouse gas emissions of Subsurface Wastewater Infiltration Systems during low temperature seasons 1.00
Comprehensive life cycle carbon emission estimation of coalfield spontaneous combustion using time series thermal infrared remote sensing 0.80
Membrane-aerated Electro-Fenton system for nanofiltration concentrate treatment: hydrogen peroxide generation enhanced and carbon dioxide stripping control 1.00
Cyclic secondary amine-based deep eutectic solvents for energy efficient CO2 capture 1.00
A framework for online passive electrochemical impedance spectroscopy acquisition in parallel-connected battery systems under real driving conditions 1.00
Electroenhanced organic pollutant adsorption by three - dimensional isolated electrodes: Investigation of the “short - plate effect” 1.00
Redox fluctuations and iron enrichment orchestrate a time-coordinated Fe–N metabolism in constructed wetlands 1.00
Degradation of reactive black 5 via N-C/FeS2/Fe3O4-catalyzed persulfate system: Using textile dyeing sludge as catalyst precursor 1.00
A sustainable echelon re-utilization and recycling for dynamic end-of-life electric vehicle battery packs 0.40
Hydrophobicity-tailored activated coke/graphite hybrid particle electrodes boosting bio-electro-Fenton mineralization of phenols in a three-dimensional electrochemical system 1.00
Composition and structural heterogeneity of multisource black carbon: Multidimensional analysis of PCA-PARAFAC based on the association between particulate and dissolved states 1.00
Sulfur-doped CoFe2O4 as an efficient peroxymonosulfate-activated catalyst for carbamazepine removal: The key role of sulfur and mechanism study 0.93
Effects of membrane fouling, cleaning, and aging on ultrafiltration performance in water treatment systems 1.00
Fe/S co-doped biochar catalysts for enhanced peroxymonosulfate activation: Synergistic effects of catalysis and anti-deactivation on antibiotic degradation 1.00
The mechanisms of vortex in tubular flame combustion and the impact on emissions 1.00
Interpretable-generative machine learning approaches for predicting simultaneous removal of organic pollutants and heavy metals from water by adsorbent materials 0.53
Unveiling the crucial role of built-in electric field and active species in metal-doped MOFs for enhanced adsorption-photocatalysis of low-concentration emerging organic pollutants 1.00
From TG-DSC experiment to one-dimensional smoldering propagation---- oxygen transport and reaction kinetics coupling investigation in coal fires 0.92
Thermo-economic analysis of a novel cascaded latent heat storage Carnot battery with fluid composition adjustment 1.00
Expanding application of struvite as fertilizer in hydroponic cultivation by providing accumulative nutrients supply 1.00
Electrochemical dimerization of furfural and 5-hydroxymethylfurfural into aviation fuel precursors: Optimization and mechanistic insights 0.82
An asymmetric, electrochemically mediated precipitation system with proton-capturing anolyte for energy-efficient phosphate recovery from wastewater 1.00
Smoldering heterogeneous oily sludge: Key influencing factors 0.86
Mechanism-data hybrid-driven modeling of energy consumption and carbon emission for converter steelmaking process optimization 1.00
Green synthesis and mechanistic insights into carbon-rich materials in deep eutectic systems and their application for adsorption 1.00
Synergistically engineered chitosan/polyethylene glycol hydrogel with dynamic H-bonding and enhanced photothermal CNTs for robust atmospheric water harvesting 1.00
Invasive plant-derived low-cost Fe-Co hydrochar for singlet oxygen-dominated sulfamethoxazole degradation: Performance, mechanism and life cycle assessment 0.83
Efficient degradation of diclofenac by FeS2-Cu2S activated peroxymonosulfate: Performance and mechanism 1.00
Development of Ca-alginate/nano SiO2 PCC based on waste cooking oil derivative for foamed concrete applied to energy-saving system 0.86
Resorcinol-formaldehyde resin as co-catalyst in Fenton-like reaction: Synergistic enhancement of Fe3+/Fe2+ cycling via phenolic hydroxyl redox and conjugated-structure mediated electron transfer 1.00
Activation of peroxymonosulfate by NiCo2S4/covalent organic framework composites for the degradation of organic pollutants: Catalytic performance and mechanism 1.00
Phase transformation and removal mechanism of iron impurities in vein quartz during ammonium sulfate roasting 1.00
Unraveling algae-bacteria synergistic mechanisms in algae-based high phenol wastewater treatment: Carbon emission and economic analyses 1.00
Rapid and stable transition of magnetite-assisted mycelial pellets to aerobic granular sludge under hypersaline environment 1.00
Clean development pathway for China's iron and steel industry 2020–2035: Carbon dioxide, air pollutant emissions and health benefits 1.00
Sequential oxidation-reduction process for active chlorine distribution regulation on ammonia oxidation in the flow-through electrode system 1.00
Study on functional group evolution mechanisms and chemical kinetics during gas coal oxygen-free pyrolysis: Insights from high-temperature in-situ FTIR 0.78
Data-driven optimization of polycyclic aromatic hydrocarbons removal by organic composites from aquatic environments: Integrating machine learning with theoretical calculations 0.80
Aromatic enriched oil production via microwave-assisted catalytic co-pyrolysis of baked semen abutilon seeds and waste expanded polystyrene 1.00
Do steel industrial policies make a difference? LCA-based quantification of environmental impacts and cost benefits from steel production in China 1.00
Conversion of polluted sediments into sustainable phosphate-adsorbing ceramics 1.00
Removal of organic pollutants and recovery of crystalline salt from ammonium sulfate waste salt by antisolvent crystallization process 1.00
Treating waste with waste: 1 h deep-drying of sewage sludge by secondary aluminum ash 1.00
Analysis of the synchronous enhancement in CO2 sequestration by steel slag using steam in flue gas: performance and mechanism 1.00
Cobalt-boron-doped graphitic biochar for enhanced ofloxacin removal and mineralization via non-radical-dominated advanced oxidation processes 1.00
Enhanced acid gas capture in Rectisol process with methanol-DES mixed absorbents 1.00
An industrializable recovery technology for marine oil spill based on solar-thermal adsorption material 1.00
A novel coupled strategy of clean and efficient molten salt electrolysis and salt bath carbonisation: Recycling cemented carbide scraps to regenerate tungsten carbide and cobalt composite powders 1.00
Sustainable biodiesel synthesis from multi-feedstock systems: Integrating convolutional neural networks with life cycle assessment for energy-climate trade-off analysis 0.94
Magnetic field treatment for mitigating inorganic and particulate fouling in reclaimed wastewater distribution systems 1.00
Environmental impact analysis and low-carbon transition strategies for the coal chemical industry in the yellow river basin 1.00
Green methanol synthesis from renewable energy integrated with compressed CO2 energy storage and waste-based systems: Thermodynamic, economic and environmental assessment 1.00
Separation of ZnAlFeO4 spinel via co-pyrometallurgy treatment of electroplating sludge and iron sludge: Comparative performances and mechanisms 1.00
Performance and mechanism of synchronous carbon and nitrogen removal from secondary effluent by denitrification coupled with partial-denitrification anammox 1.00
Calcium and magnesium ions removal by different bacteria strains: Implications for limitation of lime-scale formation during seawater desalination 0.86
Efficient removal of trace diazepam via enhanced peroxymonosulfate activation by 1T-phase and sulfur vacancy-rich MoS2-C-Fe 1.00
Sustainable production of zinc ammonium chloride from hazardous oil sludge through integrated solvent-assisted metal leaching and byproduct recovery 1.00
Enhanced HCl resistance of Na-Ce/Al2O3 hydrolysis catalyst to boost blast furnace gas purification 1.00
Anoxic fraction-driven nutrient removal improvement mechanism in high-rate anoxic/microaerobic systems for sewage treatment 1.00
Optimized O2/CO2–fuel atmosphere for the synergistic–Removal of aromatic hydrocarbons and nitrogen oxides from lignite combustion 1.00
Carbon-water nexus of China's iron and steel industry through CCUS technology development 0.93
Recycled agricultural waste enhances denitrification efficiency in iron-based constructed wetlands through improving electron transfer capacity: Feasibility and mechanism 1.00
Low-carbon nitrogen removal from actual landfill leachate by heterotrophic-autotrophic coupled biological treatment system and its functional mechanisms 1.00
Waste to worth: Fabrication of pyrolyzed coupled with ball-milled oyster shell for efficient phosphate removal and recovery 0.83
A novel [MMIM]-based ionic liquid extractive distillation process for achieving liquid-phase propylene at 1.8 MPa with enhanced energy-economic-environmental benefits 1.00
Aeration-assisted three-dimensional granular boron-doped diamond electrochemical system for high-efficiency organic pollutant degradation: synergistic reactive oxygen species generation and enhanced mass transfer 1.00
Preparation of battery-grade iron phosphate from iron-rich waste acid in titanium white production 1.00
Superior anti-fouling Janus wood-based evaporator simultaneously achieving efficient evaporation and stable thermoelectric generation 1.00
Impact of metal acetate on pyrolysis process of waste wind turbine blade to generate p-isoproprenylphenol-rich substances 1.00
Greenhouse gas emission reduction strategies for petrochemical wastewater treatment: Life cycle assessment of retrofitting scenarios 1.00
Novel and efficient separation of zinc and magnesium: a citric acid-sodium sulfide stepwise precipitation method 0.80
Metagenomic insights into a solid phase heterotrophic-autotrophic denitrification reactor driven by biodegradable polymers and pyrite 0.80
From solid wastes to functional catalysts for persulfate Activation: Biochar with structured Fe mediated non-radical pathway for chlorinated phenols removal 1.00
Novel mass transfer kinetics model for predicting phase separation behavior in CO2 capture with energy-saving biphasic absorbents 1.00
Construction of a catalyst screening method for furfural hydrogenation to furfuryl alcohol based on machine learning 1.00
Interfacial electric field steering S-scheme charge transfer in MIL-88A(Fe)/polydopamine Heterojunctions: Dual-redox pathways for efficient pollutant mineralization 1.00
Selective complexation-stepwise precipitation-roasting process for separating and preparing ZnO nanoflakes from complex zinc-containing solutions 1.00
Engineering oxygen vacancies and acidic site density in MnOx/CMS via Mn3+/Mn4+ ratio manipulation for ambient deep desulfurization 1.00
3D biomimetic dual-layer fabric evaporator with solar-wind synergy for high-efficiency water desalination 1.00
Synthesis of advanced cyclo-branched alkanes for jet fuel from biomass-derived platform compounds 1.00
Magnetic FeS2 embedded in N doped carbon towards peroxymonosulfate activation for highly efficient methylene blue removal 1.00
Low pressure thermal separation for direct preparation of α-ZnS nanobelts from marmatite: A green approach for refractory zinc resource utilization 1.00
The chlorine migration routes and transformation mechanism during the co-pyrolysis of polyvinyl chloride and low-rank coal 1.00
Basicity regulated MgO aerogel with high adsorption capacity for medium-temperature CO2 capture 1.00
A novel hydrogen liquefaction model: numerical study of supersonic condensation and structural optimization for multi-state hydrogen for enhanced transportation 0.67
Hierarchical iron phosphides@hard carbon composite cathodes for phenol degradation by highly efficient heterogeneous electro-Fenton 1.00
Ni/CeO2 composited hydrogel evaporator for high-light solar-driven evaporation with multi-environmental adaptability 1.00
Synergistic mitigation potential of carbon and air pollutants in China's cement industry:A perspective from material-energy flows 1.00
Sustainable recovery of pure aluminum from scrap aluminum alloy via soluble anode electrolysis: Cathodic deposition behavior of Al and Mg ions in MgCl2–KCl–NaCl molten salt system 1.00
Engineering bicarbonate pathways through amine synergy: Mechanistic insights into high-efficiency CO2 capture with a tailored ternary blend 1.00
Fast sorting method for lithium-ion batteries based on partial frequency bands of electrochemical impedance spectroscopy 1.00
Synthesis and characterization of geopolymer microspheres at H3PO4 activated metakaolin and adsorption-immobilization performance of F− 1.00
Transforming competitors into cooperators: Nitrospira provide nitric oxide for Candidatus Brocadia to achieve synergistic nitrogen removal 1.00
From urban waste to environmentally friendly coating-waste cooking oil derivative/polystyrene phase change coating for foamed concrete 0.86
K-doped LaAlO3 A-sites: Regulating surface basicity and oxygen species composition for highly efficient organosulfur hydrolysis 1.00
Near-complete mineralization of sulfamethoxazole through intimately coupled Fe2O3/Mn2O3-catalytic ozonation and biodegradation with low ozone dosage 1.00
In situ biosynthesis of biosorbent with bacterial cellulose and Aureobasidium pullulans for Cr(Ⅵ) removal 1.00
Integration of immobilized microorganisms with a groundwater circulation well for the remediation of naphthalene-contaminated aquifers 1.00
Enhanced treatment of reclaimed water contaminated with emerging contaminants using a flow-through Fenton-like reactor based on nanoconfinement effects 1.00
ε-MnO2 with oxygen defect Engineering: Modulating local electron density to enhance superoxide radical generation via peroxymonosulfate activation 0.81
Novel biochar-PHBV denitrification enhanced constructed wetlands for the treatment of municipal tailwater: extracellular electron transfer and microbial synergism 1.00
Fabrication and application of high-performance Noria-based organic solvent nanofiltration membranes for low-polarity natural product separation 1.00
Nitrous oxide emissions induced by antibiotics during denitrification: the mediating role of carbon source on energy metabolism and electron transport chain 1.00
Experimental study on the flammability limit of associated flammable gases in oil wells under high pressure and temperature 1.00
Mitigation of ultrafiltration membrane fouling by peroxides activated by powdered activated carbon: Comparison among sodium percarbonate, hydrogen peroxide and peroxymonosulfate 1.00
Evaluating the co-control potential of CO2 and air pollutant emission reductions in the cement industry in China: A case in Henan 1.00
Pioneering integration of bimetallic Fe2O3-Mn2O3 nanoparticles into polyamide nanofiltration membranes for enhanced antibiotic wastewater treatment 1.00
Novel adaptive optimization framework with multipath relaxation penalty for heat integration network 1.00
Effect of water washing on pyrolysis of Shaerhu coal and prediction of sodium and chloride release using neural network model 1.00
Evaluating iron scraps for improved sulfur autotrophic denitrification and phosphorus removal in subsurface flow constructed wetlands 1.00
Realizing higher activity in Fenton-like reaction on less catalytic sites by using Zn2+ to regulate electronic structure of ZIF-67 1.00
Recycling and utilization of electronic waste plastic into adsorbent with secondary adsorption 1.00
Novel aeration-free electro-Fenton system based on N, P self-doped carbon cathode and oxygen defect-rich Mn1.1Fe1.9O4 particle electrodes for efficient H2O2 generation and tetracycline degradation 1.00
A 1O2-dominated metal-free electro-Fenton floating system for water decontamination 0.88
Hybrid membrane-absorption-stabilization separation Process: Molecular Modeling, Process Identification, and Optimization 1.00
Mechanistic insights into the removal of copper, cadmium, and their EDTA complexes from water by potassium ferrate 1.00
An Intelligent Fuzzy PI Hybrid Control Strategy for Energy Optimization and N2O Mitigation in WWTPs: A Model-Based Study 1.00
Exploring the preferred technology for sewage sludge treatment in China based on an integrated method of life cycle assessment and monetization model 1.00
Carbon emissions from rural wastewater treatment using the anoxic-anaerobic-oxic membrane bioreactor process 1.00
2 1.79
A Fragment Model of Spherical Snow Particles Based on Discrete Element Method 1.00
Anthropogenic Carbon Monoxide Emissions During 2014–2020 in China Constrained by In Situ Ground Observations 0.79
195 172.31
Dynamic Interfacial Complexation Engineering Enables Multielectron Ah-Level Halogen Conversion Batteries 1.00
Overlooked Solid Electrolyte Interphase Destabilization by Oxygen Gas Crossover in High-Energy Lithium-Ion Batteries 1.00
Imaging of Nano-Concave Surface Overcoming the Surface Diffusion Barrier in Zeolites 1.00
Synergistic Barium–Oxygen Vacancy Catalysis Engineered with MWW Zeolites for Efficient PET Glycolytic Depolymerization 1.00
Localized Deep Eutectic Electrolytes for Durable 4.8 V Lithium Metal Batteries 1.00
Design for an Interface in Oxyhalide-Based All-Solid-State Lithium Metal Batteries 1.00
Spin-Selective Water Rejection in Fe-N-C Catalysts via Graphitic Macro-Ligand Engineering 1.00
Gas-Phase and Condensed-Phase Synergy in a Nonflammable Electrolyte for Highly Stable Sodium-Ion Batteries 1.00
Ammoniated Covalent Organic Frameworks for Water-Lean Carbon Capture 0.07
Deprotonation-Induced Strong Covalent Interfacial Bonding Stabilizes the Solid Electrolyte Interphase and Raises the Performance of Lithium-Ion Batteries 0.43
Quantitative Diagnosis of Li Plating Morphology by Analyzing Response of Electrochemical Impedance Spectroscopy in Working Li Batteries 1.00
Reactive Hydrogen-Driven Dehydroxylation of Hydroxyapatite Enables Anti-Ostwald Ripening of Ag Nanoparticles for Ethanol Valorization to Aromatics 1.00
Efficient Electrolysis of Biomass-Derived Carbonyl Compounds to Alcohols via Lanthanide-Modulated Hydrogenation Pathways 1.00
Synergistic Regulation of Nucleation and Interfacial Chemistry for Energy-Dense and Durable Anode-Free Na Batteries 1.00
A Fused Quinone–Pyrazine-Based Aqueous Flow Battery Negolyte with Record Volumetric Capacity and Long Lifetime 0.33
Electrosynthesis of Biodegradable Plastic Monomer Dimethyl Furan-2,5-Dicarboxylate from Inedible Hemicellulose Derivatives and CO2 1.00
Molecular Design of Crystalline Potassium Pyridonate Electrolytes for All-Solid-State Potassium Metal Batteries 1.00
Preferential Stripping and Selective Passivation of Zinc Crystal Facets in Zinc–Metal Batteries 0.93
Scalable Zn Single Atom-Gluing Ru for 75-W-Scale Alkaline Membrane Fuel Cell Stacks 0.77
Practical Multiphase Transition Kinetics in High-Energy-Density Layered Cathodes 1.00
Room-Temperature Conversion of Methane with Ozone over MOR Lattice-Confined Pd Sites 1.00
Temperature-Adaptive Electrolyte Enables Stable Cycling of Liquid Lithium Pouch Cells at ≥100 °C 1.00
Integrating Gel Electrolyte/Anode with Mixed Ionic-Electronic Network for Stable Quasi-Solid-State Lithium Metal Batteries 1.00
Nanoconfinement of Pd Ensembles in Ceria’s Bridging Hydroxyl Nests for Enhanced C–H Bond Activation 1.00
Selective Upcycling of Waste Polyethylene into Propane Facilitated by the Undulation Confinement Effect in Zeolite Channels 1.00
Sequenced Interfacial Chemistry for Stabilizing Reactive Lithium Metal Anodes 0.91
Shape-Selective Conversion of High-Density Polyethylene into Benzene with Zeolite-Encapsulated Subnanometer Pt Catalysts 1.00
Electrocatalytic C–S Coupling for Efficient Organosulfur Electrosynthesis from Mixed Polyols with >99% of Carbon Selectivity 1.00
Highly Efficient Chlorine Fixation Based on Organic Selenium for 3.7-V Aqueous Batteries 1.00
Self-Adaptive Superionic Electrolytes via Multiple-Cation Modulation for All-Solid-State Lithium–Metal Batteries 1.00
Catalyzing Li-Salt Dissociation and Decomposition for a Conformal Low-Impedance Solid Electrolyte Interphase in Solid-State Li Metal Batteries 0.70
Heteroatom-Engineered Atomic Electric Fields Activate C–F Bond for Efficient Perfluorocarbon Decomposition 0.86
Harnessing Spatiotemporal Dynamics of Polymerized Electrolytes for Durable High-Voltage Lithium Metal Batteries 0.80
Dynamic Alloying Codeposition/Costripping for Dendrite-Less Multivalent Metal Batteries 0.92
Resolving Ionic Liquid Electrolyte-Mediated Microscopic Electrified Interface for Stable Lithium Metal Anode 1.00
Cleavage Alkylation Coupling with Versatile Amide-Based Eutectic Catalytic Systems 0.73
Biomass-Derived Sustainable Dual-Atom Catalysts Enabled Highly Efficient Electrochemical Reductive Ring-Opening of 5-Hydroxymethylfurfural to 2,5-Hexanediol 1.00
Bioinspired Catalyst/Electrolyte Interfacial Hydrogen-Bond Network Engineering toward Proton Transfer Acceleration for Glycerol Electrooxidation 1.00
Engineering Freestanding Porous Carbon Electrodes by Self-Assembled Colloidal Liquid Crystalline Phase 1.00
Synergetic Relay of Oxygen Transfer and Benzene-Ring-Opening Processes for Efficient Dechlorination Reactions 1.00
Decoding Interfacial Evolution of Aluminum Anode and Constructing Multifunctional Layers toward Ultra-Long Cycle Stability 1.00
Dense Platinum-Based Intermetallic Nanoparticles Confined into Hollow Mesoporous Carbon for Durable High-Power Heavy-Duty Fuel Cells 0.91
Interfacial Brønsted Acid Site Architectures on Amorphous Silica–Alumina Resolved by Heteronuclear-Filtered Two-Dimensional Solid-State NMR Correlation Spectroscopy 0.72
Multifunctional Asymmetric Soluble Covalent Organic Frameworks: A Versatile Medium for Stabilizing Lithium Anode Interfaces 1.00
Aluminum Acetylacetonate-Confined In-Situ Polymer as Dynamic Active Medium for Sustainable Solid-State Lithium–Sulfur Batteries 0.50
Cobalt-Doping Unlocks Copper Self-Healing Chemistry in Copper Hexacyanoferrate for Long-Cycling Aqueous Mg-Ion Storage 1.00
Combating Phase Segregation in Earth-Abundant Pyrite Cathodes for High-Energy-Density Lithium–Metal Batteries 1.00
Amphiphile Confined Water Electrolyte Enables Facilitated Cation Transport through Nanometric Water Channels 1.00
High-Entropy Polymeric Electrolytes Facilitating Ion Conduction and Interfacial Desolvation in Low-Temperature Zinc Batteries 0.18
Tailoring the Electrical Double Layer and Interfacial Electric Field with Diverse Configurational Entropy-Driven Electrolyte for Ultrastable Zinc Metal Anodes 1.00
Dynamically Adaptive Interfacial Chemistry via Molecular Programming for Sustainable Zn Batteries 1.00
Conversion of Polyesters to Versatile Synthetic Subunits Enabled by Manganese-Catalyzed Transfer Semi-Hydrogenolysis with Ethanol 1.00
Dynamic Anode/Cathode–Electrolyte Interface Induced through Polymer Evolution for Durable Lithium Metal Batteries 0.93
Directional Ion Migration Enables Precise Heterointerface Optimization for High-Temperature CO2 Electrolysis 0.63
Efficient Halogen Radical-Mediated Photosynthesis of Cyclic Carbonates over Perylene Diimide-Grafted Zirconium Metal–Organic Frameworks with Visible Light Irradiation 1.00
Supramolecular-Based Ion Separation Membranes for Direct Separation of Concentrated Mixed-Salt Solutions 1.00
Stable, High-Yield Ethylene Production from Vapor-Assisted Light-Driven Ethane Dehydrogenation 1.00
Highly Selective Dehydroaromatization of n-Alkanes to Aromatics and Hydrogen Gas 1.00
Rational Lithium Salt Selection Principle for Designing High-Entropy Electrolytes toward High-Performance Lithium Metal Batteries 1.00
Dynamic Homogeneous Catalysis Enables Stable and Efficient Aqueous Organosulfur Redox Flow Batteries 1.00
Pretreatment-Free Direct Seawater Electrolysis Using Chloride-Blocking Bipolar Membranes 1.00
Over 500 Wh kg–1 Solid-State Lithium Metal Batteries with Long Cycling Stability Using In Situ Polymerized Electrolyte 1.00
An Ideal Surface Reveals How Active It Is and Why It Degrades: SrTi0.5Fe0.5O3−δ Model Thin Film with Atomically Flat Terraces─A Case Study 0.15
Sustainable and Efficient Bicarbonate Electrolysis via Enhanced CO2 and Cation Availability on a Gas–Water Dual-Permeable Electrode 1.00
Tracing Lithophilic Sites: In Situ Nanovisualization of Their Migration and Degradation in All-Solid-State Lithium Batteries 1.00
Light-Induced NH4+ Deprotonation Drives NH4+/H+ Hybrid Storage Toward Near-Theoretical Capacity in NH4V4O10 Electrodes 1.00
Decoupling Acidity from Micropore Confinement in an Amorphous–Crystalline Composite for Selective Polyolefin Waste Cracking 1.00
Highly Selective Methylation of Ethylene to Propylene within the Confined Side Pockets of Mordenite Zeolite 1.00
Solvation-Structure Design of Multicomponent Eutectic Electrolytes Enabling Al-Rich Alloy Growth in Aqueous Aluminum-Ion Batteries 0.29
A Transformative Molecular Muscle Solid Electrolyte 1.00
Accelerated Defluorination Kinetics for an Ultrathin Solid–Electrolyte Interphase in Durable Lithium Metal Batteries 1.00
Robust Formate Electrosynthesis from Mixed Biomass Polyols by a Direct Carbon–Carbon Bond Cleavage Route 1.00
Amphiphilic Fluorinated Block Copolymer Additives for Ultrastable Aqueous Zn-Ion Batteries 0.13
Growing Sodiophilic ZnO Nanorod Arrays on Al Substrate for High-Energy-Density Anode-Free Na Batteries 1.00
Unlocking Multielectron Transfer in a Quinone–Pyrazine Conjoined Redox Core for Capacity-Doubled and Ultrastable Aqueous Organic Redox Flow Batteries 1.00
A Funnel-Structured 12 × 10-Ring Zeolite Customized for Biomass Catalytic Pyrolysis 1.00
Precision-Engineered Crystalline Covalent Organic Framework Membranes with Staggered ABC Stacking for High-Performance Desalination 0.60
Upcycling of Acid Waste Gases Using Asymmetric Atomic-Copper-Anchored Covalent Organic Framework Catalyst 1.00
Heterointerface-Enabled Anti-Reverse-Current Electrodes for Alkaline Water Electrolyzers at 1000 mA cm–2 0.92
Steric Hindrance-Driven Closed-Loop Conversion of Acceptor Enables Long-Life and High-Capacity Fluoride-Ion Batteries 1.00
Hydrogen Spillover-Mediated Spatial Decoupling Process Boosts Syngas Conversion to Higher Oxygenates 0.92
Mechanically Strong and Tough Ionic Liquid Gel Electrolyte for Four-Electron Zinc–Iodine Batteries 0.83
Nickel(0)/Phosphine-Catalyzed Copolymerization of CO2 and Cyclohexylallene to Degradable Long-Chain Polyesters 1.00
Intermolecular Attraction–Repulsion Forces Enable Self-Reinforcing Electrolytes for Wide-Temperature Sodium Metal Batteries 1.00
Efficient Product Regulation of CO2 Hydrogenation over an Intelligent Dual-Zeolite System 0.68
Azo-Bridged Metal–Organic Frameworks with Robust Zr6-Cluster Nodes: A Dual-Functional Design for Suppressing Polysulfide Shuttling in Lithium–Sulfur Batteries 1.00
Long-Term Operando Quantification of Li Plating on Graphite Anodes 1.00
Dual-Donor Doped Perovskite as Bifunctional Oxygen Electrode Catalyst for Reversible Protonic Ceramic Electrochemical Cell 1.00
A Chiral Electrocatalyst for High-Performance Aluminum–Sulfur Battery 0.81
Three-Dimensional Operando Photoacoustic Microscopy Reveals Hidden Patterns in the Complex Electrochemical Plating Process of Lithium Metal 1.00
Boosting Ion Transport in Manganese Dioxide Cathodes through Electronically Tuned Molecular Intercalants 1.00
Breaking Li+ Diffusion Limits in Practical Li–S Batteries via Electrolyte-Dispersible Li+-Reservoir Catalysts 0.95
Identification of Highly Active Co–O–Zn Sites in Silanol Nests for n-Butane Cascade Dehydrogenation to 1,3-Butadiene 0.89
From Cell to Atomic Level: Understanding the Degradation in 99% Coulombic Efficiency and 450 Wh kg–1 Anode-Free Pouch Cells 1.00
Metal–Organic Frameworks with Enhanced Electret Capability for Selective Electrostatic Separation 1.00
Ultrafast Encapsulation of Bimetallic Nanoclusters into Zeolites: Linking Structural Features to Catalytic Performance 0.75
Molecular Engineering of Organic Prelithiation Agents via Frontier Orbital Regulation 1.00
Regulating Lithium Intercalation/Plating Competition To Enhance Low-Temperature Performance of Li-Ion Batteries 1.00
Aqueous Zinc–Organoiodine Battery with High Kinetics and Dense Cathodes 1.00
Insights into the Dynamical Sodium Occupancy Evolution and Rate-Limiting Steps in Hard Carbon 1.00
Pronounced Catalytic Enhancement through Phase Partitioned Metal–Organic Framework Gas Shuttles 0.45
Hydrogen Bond Reconstruction Maneuver in Eutectic Electrolyte Enables Ultralong-Lifespan Zinc-Ion Batteries 1.00
Dendrite-Free High-Capacity Alkali Metal Batteries by Two-Dimensional Confinement of Desolvated Ions 1.00
Highly OH– Conductive Membranes Enabled by 2D-Hydrogen Bonding Networks within Layered Confined Nanofluidic Channels 1.00
Unlocking Polyanion-Type Materials through High-Entropy Effect for Aqueous Potassium-Ion Batteries 1.00
Constructing Symmetric All-Organic Proton Battery via Scalable Flux Synthesis of Vinylene-Linked Covalent Organic Frameworks 1.00
Homologous Imide Bonds to Build Polymer-Covalent Organic Framework Electrolytes for Efficient Ion Transport 1.00
Integrated Solvation Chemistry Enables High Energy Li Metal Batteries 1.00
Phosphate Boosts Catalytic Hydrodeoxygenation by Facilitating Proton/Electron Transfer at the Metal–Support Interface 1.00
Nature-Inspired Glycosylation Strategy Enabled Hydrosoluble Polyhydric Thioalkylated Ferrocene Derivatives for pH-Neutral Aqueous Redox Flow Batteries 1.00
Covalent Organic Frameworks with Localized High Polarity via Defect Engineering for Interfacial Regulation of Aqueous Zinc Batteries 0.93
Molecular Tailoring of Iron Chelates for Long-Cycling and High-Efficiency All-Iron Redox Flow Batteries 1.00
High-Entropy Electrolytes Downsizing Solvated Clusters and Enabling Parallel Ion Transport for Low-Temperature Aqueous Zinc Batteries 1.00
Locking Cascade Reaction Path of Bulk Degradation Achieves Stable Unmodified Solid Electrolyte 1.00
Weakly Solvating Hydrated Eutectic Electrolyte for High-Performance Aluminum-Ion Batteries with Wide Temperature Range 1.00
Galvanic Corrosion of Lithium Metal Anodes in Lithium–Sulfur Batteries 1.00
Tandem Catalysis Enables the Hydrocarboxylation of γ-Valerolactone with CO2 and H2 to Produce Adipic Acid 1.00
Modulating Molecular Microheterogeneity within Electrolytes Controls Macroscopic Battery Performance 1.00
Synergetic Electrolyte Chemistry Enables Flame-Retardancy, K+-Desolvation, Anti-Corrosion and Wide-Temperature-Tolerance in Potassium-Ion Batteries 1.00
CO Adsorbates Induced Framework-Associated Low-Valence Coδ+ Sites in Co-ZSM-5 for Ethane Dehydrogenation 0.67
Transition-Metal-Free Aluminosilicate Small-Pore Zeolites Upgrade Methane to Light Olefins 0.30
Molecular Engineering of Self-Folded Lithium Salts toward High-Energy and High-Power Lithium Metal Pouch Cells 1.00
Efficient Hydrogen Production from Ethylene Glycol Steam Reforming Catalyzed by Na-Promoted Pt/γ-Mo2N 1.00
A Universal Solid Reaction Enabling Nanosized Li2S in an Amorphous Matrix for All-Solid-State Li–S Batteries 0.38
Dynamic Interconversion of Ga(III) and GaHx in Ga-MFI Zeolites for Efficient CO2–Cyclohexane Coupling Conversion to AromaticsCli 0.88
Tandem Catalysis to Mitigate Coke Formation in the Upcycling of Mixed Polyolefin Wastes 1.00
Spin-State Tuning in PrFeO3-δ Perovskite for High-Temperature Oxygen Evolution Reaction 1.00
Quantifying Interface-Dependent Active Sites Induced by Topotactic Exsolution for CO2 Electrolysis 1.00
Fluorinated Deep Eutectic Gel Electrolytes for Sustainable Lithium Metal Batteries 1.00
Artificial Protrusion Architectures Enabling Horizontal-Diffusion Nucleation for Stable Zinc-Based Batteries 1.00
Depth-Resolved Probing of Native Solid Electrolyte Interphase Formation and Dynamics in Li Metal Batteries by Cryogenic X-Ray Photoelectron Spectroscopy 1.00
Regulated Electronic and Ionic Conductive Framework for High Energy Density Lithium–Sulfur Batteries 1.00
Precise Chemical Lithiation: A Pathway to Superior Li-Enriched Li1+xNCM523 Cathodes for Long Life Anode-Free Li Metal Batteries 1.00
High-Efficiency Hydrocracking of Polyolefin Plastics by Controlling Intimacy between Pt Clusters and Zeolite Acid Sites 1.00
A Radical-Cationic Covalent Organic Framework to Accelerate Polysulfide Conversion for Long-Durable Lithium–Sulfur Batteries 0.05
Nitrogen-Centered Organic Salts Enable Stable Lithium-Ion Supply for High-Energy-Density Batteries 1.00
Dissolution Inhibition via Intramolecular N···I Halogen Bond Enables High-Loading Zn-Organic Battery 1.00
Surface FeIV═O Induced Highly Selective Phenol Polymerization via Proton-Coupled Electron Transfer 1.00
Balanced Iodophilicity and Solvophilicity Unlocks Fast Iodine Conversion Chemistry 0.45
Anode-Protective Covalent Organic Framework Layer with Synergistic Cation–Anion Regulation for Dendrite-Free Lithium Metal Batteries 0.83
Cu Nanocluster Size Effect Inducing the Transformation of Polysulfides to Cu2S/CuS for Durable Sodium Storage 1.00
Elucidation of the Structure–Activity Relationship for Cu-Erionite in the Direct Conversion of Methane to Methanol: An Operando XAS Study 0.04
Asymmetric Cobalt Single-Atom Catalysts with Engineered Hydrophobic Microenvironment: A Reaction-Transport Coupled Strategy for Efficient Methyl Oleate Epoxidation 1.00
Air-Stable Ferrocene-Based Catholytes for Improved Performance in pH-Neutral Aqueous Organic Redox Flow Batteries 1.00
Well-Aligned Liquid Crystal Interface and Expanded Solvation Sheath Accelerate Znsup2+/sup Desolvation Kinetics for Stable Zinc Batteries 1.00
Cosolvent Electrolyte Design for High-Voltage Aqueous Zinc–Sulfur Batteries 1.00
Developing Dynamic Ion Transport Channels in Polymer Solid Electrolytes for High-Performance Lithium Metal Batteries 0.68
Facilitating Anodic Ammonia Oxidation over Trace Cobalt-Substituted Solid Solution of Platinum to Boost Direct Ammonia Fuel Cell up to 853.75 mW cm–2 1.00
Ferromagnetic Bimetallic Catalysts Enhance the Overall Performance of Lithium–Sulfur Batteries under a Magnetic Field 0.88
Efficient Kinetic-Resolution Copolymerization of Epoxides and CO2 Achieved via Computation-Guided Catalyst Design 0.75
Deciphering SN2-Type Nucleophilic Substitution via Halogen-Free Intermediates for High-Energy Zinc–Iodine Batteries 0.10
Breaking the Ion Ordering in the Perovskite Anode for Enhanced High-Temperature Oxygen Evolution Reaction Activity 0.86
Breaking Voltage Limitations: Triethyl Phosphate-Engineered PVDF-Based Electrolytes with Dual-Interphase Stabilization for 4.7 V-Class Quasi-solid-state Lithium Metal Batteries 1.00
Enhanced Photothermal Conversion through 2D/0D Nano-Heterojunction Engineering for Highly Efficient Solar Desalination 0.18
Biomimetic Sandwich-Structured Tubular Ion Pump Arrays for Lithium Metal Batteries 0.94
Formaldehyde-Mediated Initial Carbon–Carbon Bond Formation in Zeolite-Catalyzed Methanol-to-Hydrocarbon Conversion 0.25
Water-in-Salt Solution for Direct Regeneration of Degraded Lithium Iron Phosphate 1.00
Direct Natural Seawater Electrolysis through a Photoinduced Asymmetric Electric Field 0.88
Decompression-Induced Chemical Reaction in CL-20 1.00
Optimizing Surface Electronic Structure by Ba Dispersion for Enhanced High-Temperature Oxygen Evolution Reaction Activity 1.00
Engineering Low-Resistance Heterogeneous Nanofluidics for Ultrahigh Osmotic Energy Conversion 0.99
Direct Synthesis of para-Xylene from CO2 Hydrogenation with a Record-High Space-Time Yield 0.53
Reversible Multielectron Transfer Chemistry of I-Activated Voltage-Enhanced Ferrocene-Based Organic Cathodes 1.00
MXenoids: Generalization of MXene-Inspired Covalent Surface Modifications Across Two-Dimensional Materials 0.04
Direct Ice Splitting into H2 and O2 Enabled by High Ionic Conductivity 1.00
Adaptive Zincophilic-Hydrophobic Interfaces via Additive Engineering for Robust Zinc-Based Flow Batteries 1.00
Design of a P–O–M (M = Mn, Zn) d-pπ Backbonding Electrolyte Additive for 40 Ah Electrolytic Zn–MnO2 Batteries 1.00
Dynamic Evolution from Propane to Ethylene over Mordenite Zeolite for Syngas Conversion: Transition from Hydrocarbon Pool to Carbonylation Route 1.00
Electrode Fouling by Gas Bubbles Enables Catalyst-Free Hydrogen Peroxide Synthesis 0.91
Anionic Metal–Organic Framework as an Ultrafast Single-Ion Conductor for Exceptional Performance Rechargeable Zinc Batteries 1.00
A Coupled Organic Solar Battery with 12.1% Efficiency 1.00
Discovery of High-Capacity Asymmetric Three-Stage Redox Reactions of Iodine for Aqueous Batteries 1.00
Rational Molecular Design of Aryl-Lithium Reagent Enables Precise Chemical Prelithiation of Graphite Anodes for Achieving Ideal 100% Initial Coulombic Efficiency 0.83
A Minimalist Design for a Dual-Catalyst System for High-Efficiency Conversion of Waste Plastics into Liquid Fuel Products 1.00
Subnanometer Pt Catalysts Encapsulated in MEL Zeolite Mesocrystals for Hsub2/sub Production from Methylcyclohexane Dehydrogenation 0.75
Overcoming the Electrolyte-Derived Interphase Through Sequential Reactions for Stable Lithium Metal Anode 0.83
Highly Efficient Assembly-Line Production of Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis over Ru/TiO2 Catalysts 1.00
Unraveling Double-Exchange Effect Coupling Spin Modulation of Sr2Fe1.5Mo0.5O6-δ Electrocatalyst for Solid Oxide Cells 1.00
Ultrafast Cointercalation Chemistry for Low-Temperature Sodium-Ion Batteries 1.00
A Molecule Assembly Route to Simultaneously Detoxify Platinum Sites and Disentangle Reactant Transport Paths in Proton Exchange Membrane Fuel Cells 1.00
Electrodepositing Textured Sn Film as a Highly Reversible Anode for Aqueous Batteries 0.38
Inner-Sphere Electron Transfer Enabling Highly Reversible Mn2+/MnO2 Conversion toward Energy-Dense Electrolytic Zinc–Manganese Batteries 0.67
Revealing the Crucial Roles of Pore Interconnectivity between Zeolitic and Nonzeolitic Components in Enhancing Diffusion and Catalytic Efficiency of Industrial Zeolite-Based Catalysts 1.00
Carbon Nanotubes for Rechargeable Na/Cl2 Batteries 0.64
Sulfite-Based Electrolyte Chemistry with Ion–Dipole Interactions and Robust Interphase Achieves Wide-Temperature Sodium-Ion Batteries 1.00
Ptychographic Observation of Lithium Atoms in the Irradiation-Sensitive Garnet-Type Solid Electrolyte at Sub-Angstrom Resolution 1.00
Stabilizing Residual Monomers within In Situ Polymerized Electrolytes for High-Voltage Lithium Metal Batteries 0.29
In Situ Construction of Amide-Functionalized 2D Conjugated Metal–Organic Frameworks with Multiple Active Sites for High-Performance Potassium-Ion Batteries 1.00
High-Performance Hypergolic Fuels Based on Copper Hydride Clusters 1.00
Inverted Microdroplets (Microbubbles) Induced Interfacial Water Protonation to Promote Alkaline Release of Amine and Reduce Energy in CCS 1.00
Corrosion Protection of Rare Earth for Kilowatt-Level Alkaline Seawater Electrolyzer 1.00
Ketene Conversion Chemistry within Mordenite Zeolite: Pore-Size-Dependent Reaction Mechanism, Product Selectivity, and Catalytic Activity 1.00
Regulating Amine Substitution in Fluorosulfonyl-Based Flame-Retardant Electrolytes for Energy-Dense Lithium Metal Batteries 1.00
Anchoring Side Chains to Carbonate Groups for Reviving Stable Polycarbonate-Based Solid-State Lithium Metal Batteries 0.81
Microdroplet Cascade Catalysis for Highly Selective Production of Propylene Glycol under Ambient Conditions 0.88
18 17.51
PDMS Thin-Film Composite Membranes with Superior Antiswelling via Covalent Interfacial Engineering 0.91
Robust Heterogeneous-Polyamide Based Reverse Osmosis Membrane Incorporated with Nonsolvent Induced Self-Assembled Dendrimer Aggregates 1.00
Dilution-Tolerant Organoboron Catalyst for the Copolymerization of CO2 and Propylene Oxide Enabled by a Cyclic Anhydride 1.00
Copolymerization of CO2 with Epoxides by Imidazolium Engineering in Bifunctional Organoboron Catalysts 1.00
Understanding the Impact of Grafted Chain Length in Polymer Electrolytes with Nonlinear Architectures 1.00
Upgrading PET Degradation to Produce Polyester Diol with Controllable and Regular Molecular Weight 1.00
Biobased Polymers Enable the Synergistic Tuning of Li+ Transport and Mechanical Robustness via Structural Design 1.00
Antioxidant Poly(aryl piperidinium) Anion Exchange Membrane for Fuel Cells 1.00
Polyacylation as a Versatile Route toward High-Performance Ion Exchange Membranes 1.00
Positional Engineering of Ionic Side Chains Enhances π-π Stacking in Poly(m-Terphenylene Alkylene) Anion Exchange Membranes to Address the Conductivity-Stability Tradeoff 1.00
Construction of Fluorinated Poly(aryl-piperidinium) Anion Exchange Membranes with High-Speed Ion Transport Channels: Cooperativity of Self-Assembled Fluorinated Side Chains and Piperidinium Cations 1.00
Amphiphilic and Chemically Recyclable CO2-Based Polycarbonates from Biosourced Epoxides 1.00
Synergistic Rigid Twisted and Fluorinated Architectures in Zwitterionic Poly(arylene ether sulfone) for Ultrahigh Water/Salt Selectivity 1.00
Insights into the Alkaline Stability of Poly(arylene piperidinium)s 1.00
High-Performance Intrinsic Microporous Block Copolymers for High-Temperature Proton-Exchange Membranes 1.00
Chemically Closed-Loop Recyclable High-Strength Aliphatic Polycarbonate: Controlled Ring-Opening Polymerization, Kinetics, and Thermodynamics 1.00
Branched Poly(aryl piperidinium) Anion Exchange Membranes with Microphase Separation for Fuel Cells 1.00
Long-Durability Poly(dibenzofuran-co-terphenyl N-methylimidazole) Copolymer Membranes for High-Temperature Polymer Electrolyte Membrane Fuel Cells 0.60
111 104.07
Elucidating High-Potential Degradation Mechanisms in Proton Exchange Membrane Fuel Cells 1.00
Portable Integrated Composite Aerogels for High-Power Electricity Generation and Efficient Seawater Desalination 0.94
Dual Kinetic Promotion of Sulfur Redox Reactions in Lithium–Sulfur Batteries Driven by a Magneto-optical Synergistic Effect 1.00
Engineered Atom-Particle Coupling in Dice-Like Hollow Carbon Cages Accelerates Oxygen Electrocatalysis for Efficient Zinc–Air Batteries 0.41
One-Step Stacking Armor Current Collectors for Dendrite-Free Lithium Metal Batteries 1.00
Steering Three-Dimensional Li2S Deposition via a Janus-Structured Separator with a Dual-Ion/Electron-Conducting Interfacial Mediator for Low-Temperature Lithium–Sulfur Batteries 1.00
Green and Mass-Producible Biomass Separator with Nanoconfined Channels for Practical High-Performance Zinc-Ion Batteries 1.00
In Situ Polymerized “Solvated-Ionic-Liquid in Oligomer” Composite Electrolyte with Multiscale Anion Immobilization for Solid-State Lithium-Metal Batteries 1.00
Hierarchical Se-Ti3C2@CNTs Catalytic Network for High-Stability Li–S Batteries: Synergistic Polysulfide Anchoring and Conversion 1.00
Oxygen-Vacancy-Engineered Biomimetic Interphase for Dendrite-Free Lithium-Metal Anodes 1.00
Overcoming Li+ Transport Hysteresis via Bio-Inspired Neuron-Like 3D Carbon Framework Engineering for Stable Li Metal Anode 1.00
A Phosphorus-Positive Porous Aromatic Framework Enables Shuttle-Free Durable Zinc–Iodine Batteries 1.00
Activating Anionic Redox of Li-Rich Mn-Based Layered Oxide in All-Solid-State Batteries by Tailoring the Cathode Microstructure 1.00
In Situ Reconstructed CuPS3-Derived Phosphorus Hybrid Anode for Ultrafast and Durable Sodium/Lithium Storage 1.00
Elucidating Dynamic Evolution of the Sulfur Cathode in Sulfide-Based All-Solid-State Lithium–Sulfur Batteries 1.00
Modulating Oxygen Activity via Cation Doping for Efficient High-Temperature Carbon Dioxide Electrolysis 1.00
Tuning Porous Carbon into Hard Carbon via an SN2 Reaction for Enhanced Sodium Storage 1.00
Fast Iodine Conversion Kinetics Enabled by Highly Electrocatalytic Molybdenum Carbide Nanocrystal-Embedded Ordered Carbon Nanocages 1.00
Sustainable Binder-Driven Four-Electron I–/I0/I+ Conversion in Metal–Iodine Batteries 1.00
Hydrogen-Bond and Solvation-Shell Dual Modulation Enables Safe Gel Polymer Electrolyte for Lithium Metal Batteries 0.73
Long-Chain Branched α-Alkenes from Plastic Upcycling Using Mo2C–Zn Nanoclusters Embedded on Hierarchical Porous Carbon 1.00
Highly Flexible Fiber Supercapacitors with Ultra-High Energy Density for Energy Storage Electronic Textiles 1.00
Scalable Production and Covalent Functionalization of WS2 Nanosheets for Membrane Fabrication and Ion Separation 0.90
Polarity-Matched Organic–Inorganic Interphase Directs Planar Zinc Deposition toward Highly Reversible Zn Anodes 1.00
In Situ Magnetism Decoupling Gradient-Regulated Mn–O Interaction Mechanism on Stabilizing Li-Rich Cathodes 1.00
Perfluoro Polyether Coated Chloride Solid Electrolytes Enable Stable All-Solid-State Batteries with Ultrahigh-Nickel Cathodes 1.00
Fully Conjugated Covalent Porous Polymers for Highly Efficient Solar-Thermal Conversion 0.72
Ultralight Fluorine-Rich Covalent Organic Framework Composite Aerogel for Fast and Durable Zinc-Ion Storage 1.00
Quantifying Chemical Capacitance and Diffusion Coefficients in Hydrogenated La0.6Sr0.4FeO3–δ via Operando Spectro-Electrochemical Characterizations 1.00
Mechanically and Conductively Adaptive Interface for High-Rate Si-Based All-Solid-State Pouch Cell 1.00
Electrochemical Nucleation and Growth in Battery Electrodes under Reactant-Limited Conditions 0.25
Biomass-Derived Hard Carbon with Optimized Pseudo-graphitic Domains and Closed Pores for High-Performance Sodium Storage 1.00
Engineering Microporous Zn-Functionalized Carbon Catalysts for Controllable Chain Cracking and Aromatization in Polyethylene Upcycling 1.00
In Situ Fluorinated Layer Enables a High-Performance Shape-Memory Zn–I2 Battery 1.00
Anti-Corrosion Interfacial Design for Aqueous Zn Metal Batteries with Enhanced Calendar Life 0.77
Bioinspired Janus Triboelectric Surface Enabled by Laser-Patterned Oxidation 1.00
Mechanochemically Activated Carbon for Achieving CO2 Chemisorption under Mild Conditions without Chemical Treatment 1.00
Electrochemically Dissociated Highly Compact Porous Carbon as a High-Capacity Capacitive Cathode for Lithium-Ion Capacitors 1.00
Synergistic Co/Fe/Zn–Nx Active Sites on Microporous Carbon Nanotubes for High Power-Density Flexible Aqueous Magnesium–Air Batteries 1.00
Non-Noble Metallic Plasma Resonance Coupled with Photoelectric Effect Enhances the Conversion Kinetics of Photoassisted Lithium–Sulfur Batteries 1.00
Voltage-Responsive Rapid Defluorination of Free Anions in the Inner Helmholtz Layer for High-Performance Lithium Metal Batteries 1.00
Making an Ultra “Strong–Tough” Interphase by a Dynamic Elastomer in All-Solid-State Lithium Metal Batteries 1.00
Mitigating Diffusion-Limited Concentration Polarization via Intrinsic Electrocapillary Effects in Engineered Hollow Cathodes 0.67
Synergistic Amorphization and Interfacial Metallization Activates a Mn(VO3)2 Cathode with a Tailored Atomic-Layer Semimetallic 1T′-MoS2 Interphase for Advanced Aqueous Zinc-Ion Batteries 1.00
Accelerating Zn2+ Desolvation and Diffusion via Interfacial Engineering in MXene/Amorphous VOx Composites for High-Stable Zn-Ion Batteries 1.00
Friction-Induced Chemical Potential Wells in a Conjugated Matrix for Dendrite-Free Lithium Metal Anodes 0.86
Rational Design of Ultrafine Co, Fe, Ni, and Cu on Fluorine-Free Nitrogen-Doped MXene via a Molten Salt Etching Strategy for the Adsorption–Barrier–Catalyst Functions of Polysulfides toward High-Energy Lithium–Sulfur Batteries 1.00
Iron Porphyrin-Mediated Electrolyte Chemistry for Advanced Lithium–Sulfur Batteries 1.00
Covalent Organic Framework Mediated Solvation in Quasi-Solid-State Polymer Electrolyte for High-Performance Silicon-Based Lithium-Ion Batteries 0.83
Halogen Electrochemistry Enabled Complementary Lithium/Halogen Dual-Ion Batteries with Enhanced Capacity and Cyclability 1.00
Engineering p–d Coupling at Fe–Bi and Zn–Bi Sites for Efficient Li–S Conversion 0.30
Intercalation-Type Halide Cathode Material for All-Solid-State Lithium Batteries 1.00
Suppressing Continuous Zinc Epitaxial Growth in Rechargeable Zinc–Air Batteries via Plating–Stripping Balance of Ultra-Reversible Anodes 1.00
Understanding the Roles of Double- and Triple-Phase Boundaries in High-Temperature CO2 Electrolysis 0.57
Hybrid Coating with High Zn2+ Selectivity Achieves Stable Zinc Anodes 1.00
Cation–Anion Synergistic Chemistry Enables Localized Lean-Water and High-Potential-Difference Interfacial Engineering for Stable Hydrogen-Evolution-Free Zn-Metal Anodes 1.00
Gel Polymer Electrolyte Selection for Cathode of Solid-State Lithium–Sulfur Batteries 1.00
Self-Healing Flame-Retardant Core–Shell Polymer Electrolytes via 3D Coaxial Printing for High-Safety Lithium Metal Batteries 1.00
Superior Stability Cellulose Composite Separators Enable High-Rate Zinc Ion Batteries with Ultralong Cycle Life 1.00
Balancing Corrosion Resistance and Electronic Conductivity in Nanoscale Amorphous Carbon Layers via Oxidizing Engineering 1.00
Engineering Ni Quantum Dot Ledges for Catalytic Cleavage of Vertically Anchored Lithium Polysulfides on MoxC Nanosheets as Efficient Sulfur Hosts for Li–S Batteries 1.00
NbP-NbO Heterostructures with Engineered Built-In Electric Fields for Accelerated Lithium Polysulfide Conversion 1.00
Ultradense Network Hydrogels for Rapid Solar Vapor Generation 1.00
Feather-Effect-Inspired Superhydrophobic and Zincophilic Strategy for Ultrastable Zn Metal Anodes 1.00
Accelerating ZnO Formation with Hydroxoaluminate for a Stable Alkaline Zn Battery 1.00
Rational Design of V2O5/VOPO4 Heterostructure Cathode Inducing Interface Optimization for High-Rate and Long-Cycling Aqueous Zinc-Ion Batteries 1.00
iIn Situ/i Regulation of Interfacial Charge Transfer and Interlayer Van der Waals Force Enables Ultrafast Aluminum-Ion Diffusion 0.90
Achieving 766.5 Wh kgsup–1/sup Electrode-Level Energy Density via Solid-State Cathode Integrating Ultrahigh Nickel Oxide and Lithium Iron Chloride 1.00
Sulfonic Acid-Based Covalent Organic Frameworks with Efficient Zn2+ Transport and Storage for Aqueous Zinc-Ion Batteries 0.89
High-Entropy Rare Earth Halide Electrolytes with Improved Cycling Stability and Cost Effectiveness 1.00
Ternary-Active NiO–NiAl2O4–Al2O3 Nanocomposite for Selective Upcycling of Polypropylene into Liquid Branched Olefins 1.00
Nanoconfined VO2 in Hierarchical Mesoporous Carbon Nanotube for High-Performance Lithium–Sulfur Batteries 1.00
Zincophilic Hydrogen-Bonded Organic Frameworks with Vertical Channels Enabling Fast Ion-Transport Kinetics and Interface Stability toward Ultrastable Zn Anodes 1.00
Oxygen Vacancies Design of Anionic Site to Optimize Electrode–Electrolyte Interface Properties on a Li-Rich Cathode 1.00
Ion-Dipole Interaction Driven Alumina-Coated Polyethylene Separator with Enhanced Wettability for High-Performance Rechargeable Aluminum Batteries 0.25
Designing 3D Nanoporous Cu/Cu2O (Bi) with Bimodal Porosity as a High-Rate and Capacity Zinc Anode Host 1.00
Multishelled Hollow Spherical High Entropy Oxide as a Separator Modification Layer toward Stable Lithium–Metal Batteries 1.00
Multifunctional Separator Design for Regulating Zn2+ Ion Flux and Zn Stripping in Anode-Less Zn Metal Batteries 1.00
Gas Evolution Analysis of Sulfide-Based All-Solid-State Li-Ion Battery 1.00
Atomically Determining the Interstitial Lithium in the Three-Dimensional Lattice of a Lithium-Ion-Conducting Solid Electrolyte 1.00
Regulating Desolvation and Directional Ion Flux by an Ion-Capturing Carboxyl-Functionalized Separator for Stable Aqueous Zinc Batteries 1.00
Mn–Co Dual-Metal Single-Atom Catalytic Sites for Boosted Redox Kinetics in Aqueous Polysulfide/Ferricyanide Flow Batteries 1.00
Highly Conductive Polymer Electrolyte Membranes with Polyoxometalate Hybrid Nanodomains for High-Temperature Fuel Cells 1.00
Reversible Nano Crystalline-Phase Transformation in Si-Based Anode Enables Stable All-Solid-State Batteries 0.86
Nicotinamide Solid Cosolvent Enhanced Two-Electron Zinc Peroxide Chemistry for Stable Neutral Zinc-Air Batteries 1.00
Pre-Zincification of Sandwiched V2O5 to Accelerate Intercalation Kinetics and Mitigate Cathodic Passivation in Low N/P Ratio Zinc-Ion Pouch Cells 1.00
Breaking Electronic Symmetry Via Axial Asymmetric Coordination at Co Site in Dual-Channel Catalyst Boosts High-Performance Li–S Batteries 1.00
Enhancing Zinc-Ion-Transport Kinetics in Solid-State Zinc Batteries via an Internal/Surface Dual Acceleration Strategy 1.00
Functional Layer with Electron-Rich Domain and Hierarchical Ion Channel toward Stable Zinc Anode 1.00
Rational Design of Yolk–Shell Fe7S8@C-N for High Rate and Long Cycle Li-Ion Batteries 1.00
Gradient Desolvation–Diffusion Kinetic Layer Promoters for Low-Temperature Dendrite-Free Zn Metal Batteries 0.86
Solvent-Free MXene/Poly(ionic liquid) Composite Elastomers with Simultaneously Improved Mechanical and Electrical Properties for Sensing and Photothermal Applications 0.33
Enhanced Lithium-Ion Transport and Sulfur Conversion Kinetics in Li–S Batteries via High-Dielectric Composite Separators 0.78
Bioinspired Flexible Composite Hydrogels for Efficient Solar Steam Generation and Stable Electricity Harvest 0.92
Electrolyte Anion-Initiated In Situ Polymerization of Dioxolane-Derived Gel Electrolytes for Dendrite-Resistant and Separator-Free Lithium Metal Batteries 1.00
3D-Printed Metal Electrodes with Enhanced Bubble Removal for Efficient Water Electrolysis 1.00
Nanocluster-Based Liquid Crystal Electrolytes for Deformation-Responsive Proton Conductors 1.00
Interface Engineering for Constructing Air-Stable and Lithiophilic Garnet-Type Solid Electrolytes 0.83
Stable Lithium Anodes Enabled by the Hardening and High Lisup+/sup Flux Interlayer 0.89
Microfluidic-Mediated Orientation Nanoengineering for Enhanced Osmotic Energy Harvesting 1.00
Synergistic A-Site Compensation and Oxygen Vacancy Engineering Boost High-Entropy Electrolyte Performance in Protonic Ceramic Fuel Cells 1.00
Nanoscale Thermomechanical Coupling Study on the Aging of NASICON-Type Solid Electrolytes 1.00
“Like Dissolves Like” Strategy Facilitates Interfacial Polymerization for Facile Synthesis of Highly Permeable Reverse Osmosis Membranes 1.00
In Situ Environmental Transmission Electron Microscopy Investigation on LiH Formation Prompted by LiF 1.00
Contradictory Structure Design with Li2CO3 Retention for Garnet-Based Solid-State Lithium Metal Batteries 1.00
Rare-Earth Ions Regulating Lattice-Softened Bromide Solid Electrolytes for Highly Stable Fast-Charging Solid-State Batteries 1.00
Unraveling the LiMn2O4/LiPON Interface Degradation in All-Solid-State Thin-Film Lithium Batteries 1.00
An Mn2+ Cross-Linked Gel Electrolyte Enables Reversible Quasi-Solid-State Manganese Metal Batteries 1.00
Omnidirectionally Stretchable High-Performance Microbatteries Based on Nanocomposite Current Collectors 1.00
2D-Supported Vertical MXenes for Ultrafast Filtering with Ultralow Inductance 0.78
Positively Charged Quasi-Metal–Organic Framework to Reconstruct an Electric Double Layer for a Durable Zn Metal Anode 0.83
11 8.97
Hydroxy-induced cobalt oxides for syngas to light olefins 1.00
Planar Li deposition and dissolution enable practical anode-free pouch cells 1.00
Hydrofluorocarbon electrolytes for energy-dense and low-temperature batteries 1.00
Practical lithium–organic batteries enabled by an n-type conducting polymer 1.00
Extreme barocaloric effect at dissolution 0.96
Pulse heating and slip enhance charging of phase-change thermal batteries 0.86
Technological pathways for cost-effective steel decarbonization 0.07
Tailoring polymer electrolyte solvation for 600 Wh kg−1 lithium batteries 0.93
Delocalized electrolyte design enables 600 Wh kg lithium metal pouch cells 0.93
Liquid–liquid interfacial tension stabilized Li-metal batteries 1.00
A cost-effective all-in-one halide material for all-solid-state batteries 0.22
2 1.28
Unravelling gas evolution mechanisms in battery electrode materials 1.00
Solid solvation structure design improves all-solid-state organic batteries 0.28
285 249.14
Suppressing concentration polarization in lithium battery composite polymer electrolytes via piezo-assisted electromechanical coupling effect 1.00
Self-driven tandem alcoholysis for full upcycling of waste polycarbonate plastics 1.00
Unlocking Li‒S chemistry via acoustic-induced entropy-driven electrolyte 1.00
Ultralow-density rigid network hydrogels enable ultrafast and stable solar water desalination 0.80
Selective carbonate radicals generation via hydraulically driven piezo-catalysis for polymerization-based removal of phenolic pollutants 1.00
Strained Ni-WC nano-islands by localized accelerated carbonization emulate noble-metal RWGS activity 1.00
Nuclearity-dependent design principles of ruthenium catalysts for selective hydroconversion of diverse polyolefins 1.00
Upcycling of waste sodium sulfate to sodium carbonate and sulfur 0.90
Biomimetic supported catalyst inspired by stalked crinoid 1.00
Investigating the structural evolution of lithium zirconium nitrochloride solid electrolytes for all-solid-state batteries 0.83
Solvation engineering decouples bulk and interfacial chemistry for robust potassium-ion batteries 0.89
Overcoming redox barriers in black phosphorus negative electrodes through lattice P–N engineering for fast-charging Li-ion batteries 0.62
Lotus-leaf-mimetic catalytic cleaning membranes with enriched oxygen vacancies for efficient water purification 0.90
Unusual terminational effect on atomic ripple of TiCT MXenes 1.00
Cation design in complex aqueous electrolytes for low-temperature zinc-bromine flow batteries 1.00
Unlocking the ionic transport dynamics modulated by concentration artifacts of Li(Na)-ion batteries via operando optical fiber spectroscopy 0.06
Dipolar interaction-mediated molecular anchoring electrolyte enables wide-temperature sodium-ion batteries with enhanced safety and durability 1.00
Bifunctional ligand-bridged electrolyte enables high-capacity and high-energy 600 Wh kg−1 lithium-metal battery pouch cells 0.86
Tuning selectivity in the direct hydrogenolysis of PET plastic over Co catalysts through interfacial hydrogen spillover 0.71
Synthetic urine oversimplification results in misleading membrane fouling mechanisms in bipolar membrane electrodialysis 0.92
Heterointerface-engineered ZnO/CuO bimetallic sites enable pollutant-directed conversion with in situ catalyst regeneration 1.00
Convection enhanced phase change composite fibers for advanced thermal management 0.43
Universal thiourea coupling enhances electron and ion transport in quinone cathodes for aqueous zinc batteries 1.00
High-performance caffeic acid-based superhydrophilic membranes for efficient removal of microplastics-oil co-contaminants 0.37
Path entropy-driven design of solid-state electrolytes 0.50
Dual-site single-atom catalysts achieve directional adsorption-oxidation control for enhanced photo-Fenton-like reactions 1.00
Selective solar wax refining with nanoscale zero-valent iron 1.00
Asymmetric hydrophilicity-driven fast water diffusion enabling heterogeneous hygroscopic gels toward high-yield atmospheric water harvest 1.00
4f-5d orbital tag-team catalysis empowers high-loading zinc–iodine batteries 0.67
Decoupling charge‒discharge electrolysis for hydrogen evolution and organic oxidation reactions 1.00
Smart-flame-retarding layered composite Li negative electrode for safe Li metal battery 1.00
In-situ revitalizing end-of-life MBR membranes via a curtain-type dynamic membrane process 1.00
Balanced-state electrolytes overcome crossover in vanadium redox flow batteries 1.00
Breaking the rate limiting barrier in lithium||sulfur batteries via spin state engineering 0.89
Selective conversion of syngas to C long-chain alcohols 1.00
Metal-organic framework-confined Co3O4 for humidity-immune ozone decomposition 1.00
Coagulation pretreatment could deteriorate reverse osmosis membrane fouling 1.00
Alternating-sequence polymer chain facilitating Li+ transport in covalent organic frameworks 1.00
Solvation sheath reorganization enables fast ion transfer kinetics in lithium-ion battery 1.00
Highly ionic-dispersed oxygen electrode for reversible proton ceramic electrochemical cells 0.92
A hydro-topological strategy enables self-regulating biofilms for sustainable wastewater treatment 1.00
Data-driven intelligent carbonization unifies diverse biomass into high-performance hard carbon negative electrodes 1.00
Shear properties and stable wrinkle resistance in 2D Ti3C2Tx MXene monolayers 1.00
Dual-metal-doped perovskite adsorbents for efficient removal of humic acid 0.97
Interfacial configurational entropy tuning strategy enabling liquid alloys for efficient depolymerization of polyolefin waste 1.00
Dynamic hydroxyl cycle of zeolite for short and ultra-short chain PFAS free potable water 1.00
Reconstitution of woody biomass framework via dual-functional lignin engineering toward efficient and salt-resistant solar desalination 1.00
In situ synchrotron X-ray scattering reveals organic-mediated scaling mechanisms on desalination membranes 1.00
Regenerating end-of-life membranes for enhanced sustainability and unexpected performance 0.83
Unveiling the thermodynamic-kinetic trade-off effect on acid sites in zeolite-catalyzed alcohol dehydration 1.00
Multi-electron nitrobenzothiadiazole sp-conjugated-alkynyl covalent organic frameworks for ammonium-ion batteries 1.00
Built-in tandem catalysis in hierarchical pores for efficient vinyl chloride production 0.86
Direct oxidative carbonylation of methane to acetic acid via high-valent iron-oxo mediated water activation 0.64
Electric-field-reinforced affinitive electrolytes for highly reversible aqueous zinc metal batteries 1.00
Molecular fence Cu-based catalyst for CO2 hydrogenation to CO with high activity and durability 1.00
Multicomponent solid-solution alloy negative electrode for Li-metal batteries 0.95
Ternary solvation sheath reconfiguration drives sustainable cryogenic Li||Cl2 batteries 1.00
Sub-micron-resolution temperature mapping of Zn negative electrode for flow batteries 1.00
UV-activated assisted electrochemical process for mine water deep mineralization and resource recovery 1.00
One-pot co-upcycling of mixed polyolefin waste 1.00
Ultramicroporous covalent organic framework membranes with fortified hydrogen-bond networks for high-performance desalination 0.80
Precise regulation of missing linkers in MOF pervaporation membranes for desalination of hypersaline waters 0.67
Millennial land carbon emissions in China offset by carbon sinks of the past four decades 0.67
Cost-effective interfacial high-concentration electrolyte for stable lithium metal batteries 1.00
Solvation chemistry tailored via dielectric constant engineering for stable low-temperature aqueous zinc batteries 0.69
Enabling low-temperature aqueous zinc/copper-sulfur hybrid batteries through electrolyte design 1.00
Synergistic sulfur-chlorine battery chemistry towards efficient energy storage 0.96
Carbon-halogen bond substitution enables high-utilization four-electron iodine redox in noncorrosive dilute electrolytes 1.00
A countercurrent microflow strategy for simultaneous high selectivity and conversion in aromatic nitration 1.00
Electrochemical initiation and chemical reaction cascades in dual-stage thermal runaway in sulfide-based all-solid-state batteries 1.00
An aqueous battery using an electrolyte with a pH of 7 and suitable for direct environmental discard 1.00
Co-upcycling spent lithium-ion batteries and plastics into microwave absorbing materials with Ni-Co catalyst control 0.87
Dual reaction strategy for in-situ conductivity enhancement to enable high-performing aqueous zinc-based micro-batteries 1.00
Catalytic hybrid solvent regeneration in membrane vacuum processes for direct air capture 0.11
Constructing scalable hydrophobe–water micro-interfaces for catalyst-free generation of HO via macroporous resins 1.00
A medium-entropy oxygen electrode enables high-performance and contaminant-tolerant reversible solid oxide cells 1.00
Entropy-mediated solidification stabilizes and enhances energetic release in amorphous energetic materials 1.00
Intraplanar percolation and interplanar bridge enables layered matrix for high-performance negative electrode 1.00
Global application of radiative cooling in grain storage 1.00
Diffusion models enable high-fidelity prediction of fuel cell impedance spectrum from short time-domain profiles 1.00
iMOE: prediction of second-life battery degradation trajectory using interpretable mixture of experts 0.63
Synthesis of 2D amorphous carbons via energy-autonomous carbonization of polyaniline upon decomposition of HClO₄ 0.52
In situ-formed C-N anchors embedded into Sn-based negative electrodes for long-life Na-ion batteries 1.00
Enhanced sodium storage in hard carbon via solvent co-intercalation electrolyte enabling Ah-level pouch cells at low temperatures 0.83
Electrolyte chemistry of adaptive hydrogen bonded domains for high voltage lithium metal batteries 0.73
Axially engineered single atoms in enzyme-mimic-binding pocket steering dehalogenation–polymerization pathways toward water pollutant upcycling 0.86
Local alkalinity enables high-performance pure water anion exchange membrane electrolysis 0.88
Engineering thin 3D Li-composite foil negative electrodes with high mechanical toughness 1.00
Electricity-free hydrogen production from the air 0.95
Overcoming the trade-off in reverse osmosis membranes through homologous matching 1.00
Breaking activity-selectivity-stability trade-offs in reverse water-gas shift reaction via high-energy micro-faceted MoN nanocrystals 0.79
Dual Janus foam for directional thermal management 1.00
Ultralow CNT-reinforced phase-change fibers for scalable wearable thermoregulation 1.00
Photothermal effects control ultrafast charge transport in titanium carbide MXenes 0.02
Stepwise hydrogen spillover–engineered synergistic sites enable near-quantitative conversion of waste PET to -xylene 1.00
Green chemical process for continuous production of high-purity 2,5-furandicarboxylic acid in anion exchange membrane flow electrolyzer 1.00
Synergistic MOF-based composite enabling significant solar-to-water generation enhancement in climate-resilient AWH 1.00
Negative electrode degradation induced by two-stage zinc plating and its recovery in zinc batteries 0.93
An open decoupled cell design achieving electricity generation and amplification through waste-to-energy conversion 1.00
Bernoulli’s principle-mediated Cl electrosynthesis 0.70
Dynamic thermal management under variable operating conditions through magnetic field control 0.80
Zinc-based metal halide electrolytes for all-solid-state zinc-metal batteries 1.00
Interfacial evaporation-induced localized multi-field coupling enables efficient co-recovery of freshwater and nitrates 0.75
Macrocycle-assembled membranes for high-salinity organic wastewater treatment 0.60
Breaking the oxo-wall for Co(IV)-oxo species and their nanoconfined catalytic performance within Ce-Co lamellar membrane 0.95
Cluster level entropy enhancement in neutral acetate electrolytes enables economical and durable zinc air batteries 0.27
A self-breathing electrode enabled by interface regulation and gradient wettability engineering for industrial HO electrosynthesis 1.00
Regulating zinc nucleation and growth with low-surface-tension electrolytes for practical aqueous zinc metal batteries 0.89
Efficient and stable catalytic hydrolysis of perfluorocarbon enabled by SO-mediated proton supply 0.64
Crystallographic microstructure engineering for artificial solid electrolyte interphases toward stable zinc electrode 1.00
Solar-driven direct air capture to produce sustainable aviation fuel 0.25
Bi1-O-Ce synergistic sites on rod ceria for unprecedentedly efficient transesterification 1.00
Self-assembled lyotropic liquid crystal interlayer regulated interfacial polymerization for modulating structure and performance of nanofiltration membranes 1.00
Economical biogas direct methanation to pipeline grade natural gas via structured Ni based inverse catalyst 1.00
Continuous MXene fibers with near-gigapascal tensile strength via radial confinement and axial stretching 1.00
Spontaneous chlorine production from chloride-containing brines 1.00
Spatially decoupled electrochemical strategy for lime passivation prevention and sustainable phosphate recovery 0.83
Universal complexing agent enabling advanced iron-cerium redox flow batteries 0.73
Polyamide nanofilms with Janus microporous framework for sustainable solvent filtration 1.00
Aldehyde cool-flame chemistry explains a missing source of organic acids 0.91
Machine learning-assisted kinetic matching model for rational electrode design in aqueous zinc-ion batteries 0.80
CO hydrogenation toward toluene methylation for selective para-xylene synthesis 1.00
Fabrication of low-tortuosity thick electrodes with low material loss by temporally shaped ultraviolet femtosecond laser 1.00
Tailored charging protocol for densified lithium deposition and stable initially anode-free lithium metal pouch cells 1.00
Electrochemical dechlorination and hydrocarbon valorization by cobalt phthalocyanine with non-proton-coupled redox property 1.00
Gradient chaotropic regulation of Zn2+ solvation chemistry for low-temperature zinc metal batteries 0.78
Nanoarray-fortified ultra-durable nanofiber membrane via sequential crystallization 0.90
De-solvation of heteroalkali cations enabling stable solid electrolyte interphase for dendrite-free lithium metal batteries 1.00
Real-time artificial intelligence for solid-state lithium metal batteries 0.17
Strain engineering of single-site Cu on SWCNTs for highly efficient diene cyclopropanation 1.00
Hg-free electro-thermal cascade catalysis for acetylene upgrading into polyvinyl chloride precursor 1.00
Reconstruction and analysis of pore blockage fouling in ceramic ultrafiltration membranes through FIB-SEM 0.88
Advanced electrically conductive carbon nanotubes-PVDF composite membranes with electro-promoted water treatment performance 1.00
Architected continuum mixed ionic and electronic conducting alloy negative electrode for fast-charging all-solid-state lithium batteries 1.00
Advanced biomimetic nanofiltration membranes for lithium recovery with anti-janus charge structure 1.00
Feasibility study of hydrogen-ammonia synergistic combustion in scramjets across broad Mach ranges 1.00
CO2 hydrogenation talysis 1.00
Multi-stage power-to-water battery synergizes flexible energy storage and efficient atmospheric water harvesting 1.00
CoOx Nano-clusters anchored onto 10-membered ring of Silicate-1 boost propane dehydrogenation 1.00
Ultra-rapid preparation of large-area high-crystallinity covalent organic framework membranes 0.90
Oxide-hybridized carbon as a catalyst support for efficient anion exchange membrane water electrolysis 0.03
Ligand-channel-induced ion liberation in crowded zwitterionic hydrogel electrolyte for efficient zinc metal batteries 0.13
Elucidating the role of interfacial charge transfer on the oxygen incorporation/evolution reactions for solid oxide cells 1.00
Dynamic electronic modulation of single-atom Fe sites with p-block metal coordination enables highly selective generation of FeIV = O in Fenton-like reactions 1.00
In-situ formation of [AlO4]0 site for confined catalytic cracking to ethylene with low methane selectivity 1.00
Rational electrolyte solvent screening for high-energy lithium metal batteries at low temperatures 1.00
Ultrastrong MXene composite fibers through static-dynamic densification for wireless electronic textiles 0.42
Designing bi-layer electrode-electrolyte interfaces with an asymmetric ether to enable wide-temperature lithium metal batteries 1.00
Defect-induced electric field effects direct Fenton-like oxidation pathways towards polymerization for sustainable water treatment 0.89
Early prediction of lithium-ion battery degradation with a generative pre-trained transformer 0.50
Multiphase aqueous soggy sand electrolyte for zinc metal batteries applications at elevated temperatures 1.00
Voltage-controlled organic solvent nanofiltration using conjugated microporous polymer membranes 0.42
Design rules for anion-doped catalysts revealed by p-p-s orbital coupling in Li-S chemistry 1.00
A gel polymer electrolyte with multiple hydrogen bonding for pressure-free Ah silicon-based pouch cells 1.00
Latent heat-assisted cooling for high-efficiency solar-driven freshwater production 0.93
A scalable and long-cycle-life 600 Wh kg solid-state lithium metal pouch cell 1.00
Sulfophenylated centimeter-sized graphene membrane in a direct methanol fuel cell 0.22
Graphene–amorphous carbon with interwoven networks for enhanced strength 1.00
Doctor-blading-assisted interfacial polymerization for green and scalable polyamide membrane fabrication 0.86
Unified electronic-geometric descriptor deciphers peroxymonosulfate activation using Fe-based dual-atom catalysts 1.00
Unraveling surface sensitivity for generating metastable active sites in molybdenum-based catalysts for CO2 hydrogenation 0.90
Self-charging organic flow batteries based on multivalent metal negative electrodes 0.91
Strategic atomic trapping at heterointerfaces for protonic ceramic cells 0.58
Ion-engine hydrogel based solar desalination for water-electricity cogeneration with milliampere level current 1.00
Electronic structure blurring-mediated solid-state H2O2 electrosynthesis with high productivity 0.63
Covalent and polyfluorinated lithium salt for stable LiCoO batteries at high temperature and high voltage 1.00
Covalent catalyst immobilization in cross-linked ionomers for durable pure water anion exchange membrane electrolysis 1.00
Superharmonic proton motion in high-energy-density organic electrodes for aqueous zinc batteries 1.00
Flame-retardant electrolytes with electrochemically-inert and weakly coordinating dichloroalkane diluents for practical lithium metal batteries 0.95
Unraveling the hydrogen spillover in tandem propane dehydrogenation and reverse water gas shift reaction 1.00
Reconstructing interfacial electric double layer for efficient sulfur conversion reaction in aqueous zinc sulfur batteries 1.00
Single-atom Ru coupled with AlCl3 to promote asymmetric C-C coupling between CH4 and CO2 1.00
Catalytic electrolytes enable fast reaction kinetics and temperature adaptability for aqueous zinc-bromine flow batteries 1.00
Van-der-Waals-forces-modulated graphene-P-phenyl-graphene carbon allotropes 0.14
Biomimetic Janus membrane with spongy channels for directional liquid transport 0.75
Nanofiller-confined spatial fluctuation in monomer diffusion synthesizing ultrafast reverse osmosis membranes driven by hydrogen-bonding networks 0.75
Advancing sulfide solid electrolytes via green LiS synthesis 1.00
Asymmetric tapered multistage solar still with optimized mass transfer equilibrium for ultrahigh water production 1.00
Light-adaptive interfacial solar steam evaporation enhanced by dynamic water gating 1.00
Electroinitiated interfacial healing for external pressure-free solid-state sodium metal batteries 0.72
From food waste to sustainable aviation fuel: cobalt molybdenum catalysis of pretreated hydrothermal liquefaction biocrude 0.05
Design of direction-independent hydrovoltaic electricity generator based on all-foam asymmetric electrode 1.00
S/O and vinyl isomerization enables ultrafast cationic ring-opening polymerization toward CO2-derived polythioester with migrated in-chain C=C substituents 1.00
Microenvironment engineering unveils surface methoxy species origination in zeolite-catalyzed methanol chemistry under mild conditions 1.00
Conductive binary Li borate glass coating for improved Ni-rich positive electrode in sulfide-based all-solid-state Li batteries 1.00
Decoding single-crystal lithium growth through solid electrolyte interphase omics 1.00
Modulating physicochemical interfaces enables li-rich oxides based ceramic solid-state li batteries under ambient conditions 0.82
Porous membranes enable selective and stable zero-gap acidic CO2 electrolysers 1.00
Fluorine-free gel polymer electrolyte for lithium oxide-rich solid electrolyte interphase and stable Li metal batteries 1.00
Long-life aqueous zinc-iodine flow batteries enabled by selectively intercepting hydrated ions 1.00
Boosting a practical lithium carbon dioxide battery through a decoupled electrolyte 0.38
Single atom activated multi-stage active sites for thoroughgoing sodium utilization 0.75
Fluorine-oxygen co-coordination of lithium in fluorinated polymers for broad temperature quasi-solid-state batteries 1.00
Dynamic identification of reactive iron-oxo species in heterogeneous fenton-like reaction via operando stopped-flow IR spectroscopy 1.00
Membrane-free CO2 electrolyzer design for economically efficient formic acid electro-synthesis 1.00
Operando-electrified solvay process 0.63
Catastrophic localized deflagration formation mechanisms and safety precautions in proton exchange membrane water electrolyzer 1.00
Phosphorus-induced single-atom iron coordination symmetry disruption for superior catalytic ozonation 1.00
Thermal-intensified interfacial polymerization enables ultra-selective reverse osmosis membrane for toxic micropollutant removal 1.00
Scale-up of complex molecular reaction system by hybrid mechanistic modeling and deep transfer learning 1.00
Nanoimprinted polyamide membranes for ultrafast and precise molecular sieving with low fouling 0.50
Backflow H+ during interfacial polymerization matters to configure spatial charges of polyamide membranes 1.00
MXene-configured graphite towards long-life lithium-ion batteries under extreme conditions 1.00
Puzzle-like molecular assembly of non-flammable solid-state polymer electrolytes for safe and high-voltage lithium metal batteries 1.00
Microstructure engineering of polyamide membranes for ultrafast polar and non-polar solvent transport 0.80
Large lithium-ion battery model for secure shared electric bike battery in smart cities 0.67
Ultrahigh pressure compaction-resistant thin film crosslinked composite reverse osmosis membranes 0.05
Covalent organic framework membrane with hourglass-shaped nanochannels for ultrafast desalination 1.00
Bioinspired interfacial nanofluidic layer enabling high-rate and dendrite-free lithium metal negative electrodes 1.00
High-flux and anti-fouling membrane distillation membrane with VOC capture ability enabled by ZIF-8 1.00
Stabilized Fe7C3 catalyst with K–Mg dual promotion for robust CO2 hydrogenation to high-value olefins 1.00
Electrostatic field-enabled ultra-efficient evaporative cooling 0.36
Dyson sphere-like evaporators enhanced interfacial solar evaporation via self-generated internal convection 0.22
Efficient conversion of polyethylene to light olefins by self-confined cracking and reforming 1.00
Neighboring alkenyl group participated ether-based electrolyte for wide-temperature lithium metal batteries 1.00
Piezo-catalytic in-site HO generation and activation across wide pH range to drive hydroxyl radical-mediated pollutant degradation 1.00
Wide temperature range adaptable electric field driven binder for advanced lithium-sulfur batteries 1.00
Determining kinetics of H2O2 evolution from photoelectrochemical water oxidation 1.00
CO-promoted polyethylene hydrogenolysis with renewable formic acid as hydrogen donor 1.00
Activating silicon for high hydrogen conversion and sustainable anode recovery 1.00
Insights into free radical and non-radical routes regulation for water cleanup 1.00
Ethane dehydrogenation over CaCO-mediated tandem catalysts 1.00
Anchored atomic Ru-O architecture enables ultra-effective Fe(VI) activation via avoiding Fe(VI) self-decay for water purification 1.00
Screening and dissecting electroorganic synthesis by mass spectrometry decoupling of electrode and homogeneous processes 1.00
A fundamental mass transport model based on molecular insights for pervaporation desalination 1.00
Observation of dendrite formation at Li metal-electrolyte interface by a machine-learning enhanced constant potential framework 1.00
Mitigating ion flux vortex enables reversible zinc electrodeposition 0.15
Robust organic radical cations with near-unity absorption across solar spectrum 1.00
Electrochemical valorization of HS in natural gas to sulfate under mild conditions 1.00
Molecular manipulation of polyamide nanostructures reconciles the permeance-selectivity threshold for precise ion separation 1.00
Supramolecular dynamics-enhanced synergistic antifouling mechanisms for enhanced membrane antifouling and permeability 1.00
Dual-gradient metal layer for practicalizing high-energy lithium batteries 0.90
γ-Ray irradiated polyacrylamide networks enable high-performance Li||S pouch cells 1.00
CO hydrogenation to HCOOH catalyzed by aqueous Pd needle assembly 0.86
Pathways and selectivity of Fenton degradation of different precursor species of dissolved organic matter 1.00
Bioinspired photothermal zwitterionic fibrous membrane for high-efficiency solar desalination and electricity generation 1.00
Stereoisomerism of multi-functional electrolyte additives for initially anodeless aqueous zinc metal batteries 0.21
Supramolecular nanocrystalline membranes with well-aligned subnanochannels for enhanced reverse osmosis desalination 0.96
Enhanced specific energy in fast-charging lithium-ion batteries negative electrodes via Ti-O covalency-mediated low potential 0.86
High-entropy solvation chemistry towards affordable and practical Ah-level zinc metal battery 0.90
Amorphous/crystalline HTiNbO membranes for efficient confined flow synthesis of acetate ester flavours 1.00
Solvent-free thermoplastic foaming for superelastic graphene monoliths 1.00
Amphiphilic nanowire-assisted monomer shuttling enables ultra-selective reverse osmosis membranes for water purification 0.86
Full runner electrolyzer stack for industrial-current-density NO-mediated ammonia synthesis from air and water 1.00
A rationally thin composite membrane with differentiated pore structure for industrial-scale alkaline water electrolysis 1.00
Inducing hour-level humification of Enteromorpha prolifera to fabricate fulvic-like acid fertilizer with Fenton’s reagent 1.00
Nanonet trapping for effective removal of nanoplastics by iron coagulation 0.50
Zwitterion-mediated interface chemistry for practical Zn-iodine batteries 0.86
Janus particles stabilized asymmetric porous composites for thermal rectification 1.00
Biohybrid-based pyroelectric bio-denitrification driven by temperature fluctuations 1.00
Uniaxially oriented zinc metal negative electrodes toward spontaneous dislocation-free homoepitaxy 0.80
Dual-structure-breaking electrolyte enables practical cadmium-metal battery 0.22
Regulating nonradicals generation through peroxymonosulfate activation via localized dipole to enhance wastewater biodegradability 1.00
Thermoresponsive ether-based electrolyte for wide temperature operating lithium metal batteries 1.00
Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries 0.86
Paschen–Back effect modulation of SO hydration in magnetized electrolyte toward dendrite-free Zn-ion batteries 1.00
Evidence of water promotes cyclohexanol adsorption and dehydration over H-ZSM-5 zeolite 1.00
Entropy-modulated atomic ripple texturing in two-dimensional transition metal carbonitrides 1.00
MXene Templated assembly of hierarchical Al/CuO/V2C nanothermite with excellent energy release efficiency and highly tunable performance 1.00
Boosting oxygen reduction performances in Pd-based metallenes by co-confining interstitial H and -block single atoms 1.00
Cooperative Jahn-Teller effect and engineered long-range strain in manganese oxide/graphene superlattice for aqueous zinc-ion batteries 0.04
Refresh organic electrodes for high-power and long-cycle applications 0.92
Gaseous molecules-mediated electrochemical exfoliation of halogenated MXenes and its boosting in wear-resisting tribovoltaic devices 0.92
Spatially regulated water-heat transport by fluidic diode membrane for efficient solar-powered desalination and electricity generation 0.75
Oxygen-doped carbon-supported palladium nanoparticles boost the tandem hydrogenation–acetalization–hydrogenolysis of phenols and diphenyl ethers to cyclohexyl ethers 1.00
Uneven renewable energy supply constrains the decarbonization effects of excessively deployed hydrogen-based DRI technology 1.00
Solid-state eutectic electrolyte via solvation regulation for voltage-elevated and deep-reversible Zn batteries 1.00
Electron displacement polarization of high-dielectric constant fiber separators enhances interface stability 0.75
An electrochemically driven hybrid interphase enabling stable versatile zinc metal electrodes for aqueous zinc batteries 1.00
High-energy and fast-charging lithium metal batteries enabled by tuning Li-solvation via electron-withdrawing and lithiophobicity functionality 0.92
An amphoteric and hydrogen-bond-rich artificial α-amino acid for highly durable aqueous redox flow batteries 1.00
A path towards high lithium-metal electrode coulombic efficiency based on electrolyte interaction motif descriptor 1.00
Grain boundary amorphization as a strategy to mitigate lithium dendrite growth in solid-state batteries 1.00
A tungsten polyoxometalate mediated aqueous redox flow battery with high open-circuit voltage up to 2 V 0.91
Cation-driven phase transition and anion-enhanced kinetics for high energy efficiency zinc-interhalide complex batteries 1.00
Pressurized organic electrodes enable practical and extreme batteries 0.50
Water-shielding electric double layer and stable interphase engineering for durable aqueous zinc-ion batteries 1.00
Seamless incorporation of artificial water channels in defect-free polyamide membrane for desalination of brackish water 1.00
Gas–liquid two-phase bubble flow spinning for hydrovoltaic flexible electronics 1.00
Unlocking single-atom induced electronic metal-support interactions in electrocatalytic one-electron water oxidation for wastewater purification 0.63
A membrane-free electrochemical reactor for efficient oxygen removal via gravity-assisted product self-separation 1.00
Long-term transformation in China’s steel sector for carbon capture and storage technology deployment 0.75
Advancing lithium metal electrode beyond 99.9% coulombic efficiency via super-saturated electrolyte with compressed solvation structure 1.00
CO-resistant hydrogenation over noble metal/α-MoC catalyst 1.00
Multiscale interfacial stabilization via prelithiation separator engineering for Ah-level anode-free lithium batteries 1.00
12 9.80
Thermal runaway-free ampere-hour-level Na-ion battery via polymerizable non-flammable electrolyte 1.00
Solvent intercalation in layered cathodes for ultrafast sodium-ion batteries 0.93
Charge and slip-length optimization in lipid-bilayer-coated nanofluidics for enhanced osmotic energy harvesting 0.06
Durable alloy anode for Na-ion batteries with high volumetric energy density 1.00
Grid-scale corrosion-free Zn/Br flow batteries enabled by a multi-electron transfer reaction 1.00
Ultrafast thermo-responsive electrolyte for enhanced safety in lithium metal batteries 1.00
Designing safe and long-life lithium-ion batteries via a solvent-relay strategy 0.86
Photocatalytic oxidative coupling of methane to C+ hydrocarbons via nanopore-confined microenvironments 1.00
Unified affinity paradigm for the rational design of high-efficiency lithium metal electrolytes 1.00
A catalytic cycle that enables crude hydrogen separation, storage and transportation 1.00
Conformally coated scaffold design using water-tolerant Pr1.8Ba0.2NiO4.1 for protonic ceramic electrochemical cells with 5,000-h electrolysis stability 0.08
Cathode catalyst layers modified with Brønsted acid oxides to improve proton exchange membrane electrolysers for impure water splitting 0.88
6 4.12
Optical nanoscopy of spatiotemporal metal stripping cooperativity at single-ion and subparticle resolution 0.14
High-performance graphene-based carbon fibres prepared at room temperature via domain folding 1.00
Quantitative and mechanistic insights into proton dynamics for fast energy storage 0.75
Molecular engineering of two-dimensional polyamide interphase layers for anode-free lithium metal batteries 1.00
Flexible fibre-shaped fuel cells with gel-mediated internal pressure encapsulation 1.00
Beneficial redox activity of halide solid electrolytes empowering high-performance anodes in all-solid-state batteries 0.23
8 7.34
Interfacial polarity modulation of positive electrode active materials for high-potential lithium metal batteries 1.00
Proton–electron temporal asynchrony on femtosecond timescales enables anti-corrosive low-iridium anodes for PEM electrolysers 0.55
Superionic composite electrolytes with continuously perpendicular-aligned pathways for pressure-less all-solid-state lithium batteries 0.98
Breaking the yield–selectivity trade-off in polystyrene waste valorization via tandem depolymerization and hydrogenolysis 0.82
Nanoengineered aqueous-hydrotrope hybrid liquid electrolyte solutions for efficient zinc batteries across a wide temperature range 1.00
Hand-powered interfacial electric-field-enhanced water disinfection system 1.00
A nanoengineered lithium-hosting carbon/zinc oxide composite electrode material for efficient non-aqueous lithium metal batteries 1.00
Application-driven design of non-aqueous electrolyte solutions through quantification of interfacial reactions in lithium metal batteries 1.00
15 12.07
Scalable flow-through device for electrochemical water treatment without secondary pollution 1.00
Spatially coupled adsorption and catalysis for sustainable lithium–sulfur batteries 1.00
Multi-zonal anaerobic ammonium oxidation for mainstream municipal wastewater treatment 1.00
High-strength conjugated polymer framework membranes for ultrafast and precise separations 0.40
Non-corrosive organodichloro electrolyte for reversible aluminium metal batteries 1.00
Powering air travel with jet fuel derived from municipal solid waste 0.70
Adaptive interphase enabled pressure-free all-solid-state lithium metal batteries 1.00
Decoupled dual-salt electrolyte for practical aqueous zinc batteries 0.07
Plasmonic nanoheating for versatile water purification membranes 0.86
Upcycling sewage sludge into anammox seeds via in situ nitrate-driven oxidation 1.00
A smart framework to design membranes for organic micropollutants removal 1.00
Solar-driven efficient and selective ammonia recovery from ammonium-containing wastewater 1.00
Solar-enhanced low-temperature biological wastewater treatment 1.00
Synergistic gas–slag scheme to mitigate CO2 emissions from the steel industry 1.00
Selective and sustainable separation of hydrocarbons from crude oil via molecular sieve 0.04
26 25.95
Balancing Energy and Stability: A Tetracyclic Bis(trinitromethyl)-Functionalized Triazole-Oxadiazole with High Density 1.00
Potential Insensitive and High-Energy Materials Based on a Pyrazole-Triazine-Oxadiazole Skeleton 1.00
A Bicyclo[1.1.1]pentane-Based Rigid Linker for the Construction of Nitrogen-Rich Energetic Materials 1.00
Electronic-Structure-Regulated Hydrogen Atom Transfer for the Construction of High-Performance Nitroimino-Functionalized Fused Heterocyclic Energetic Materials 1.00
Tuning the Energy and Stability of Compounds by Functional Group Modification in 1,2,4-Triazole Derivatives 1.00
Electronic Structure Rearrangement via Nitroamine–Nitroimine Tautomerism: Obtaining Thermally Stable and Low-Sensitivity Nitrogen-Rich Nitroamine Energetic Materials 1.00
Constructing Inter-ring Hydrogen Bonds for High-Performance Energetic Compounds 1.00
A Novel Heat-Resistant Energetic Material: Pyrazolopyrimidine–Bistetrazole Compound 1.00
Synthesis of Energetic Material 4-Nitro-3,5-bis(trinitromethyl)-1H-pyrazole via [4 + 1] Cycloaddition 1.00
Synthesis of Pyrazole-Fused Heterocyclic N-Nitroacetamides with High Energy and Low Sensitivity 1.00
A High-Energy Low-Sensitivity Zwitterionic Material Featuring a Superhydrogen-Bonding Network Structure 1.00
High-Energy Azo-Bridged Dinitramino Materials Featuring a Planar Fused [1,2,4]Triazolo[1,5-b][1,2,4,5]tetrazine Scaffold 1.00
Breaking the Density–Thermal Stability Trade-Off: Targeted Design and Construction of an Energetic Co-crystal 1.00
Conjugated Pyrazole-Triazole/Oxadiazole Derivatives via Nitro Functionalization: Toward High-Performance Energetic Materials 1.00
Constructing Energetic Tetrazoles via a Flexible Methylene Bridge 1.00
Tetrazole Placeholder-Directed Strategy: Precise Synthesis of Tri(tetrazolyl)-Functionalized Pyrazole 1.00
Synthesis of High-Energy, Low-Sensitivity Furazan Tricyclic Energetic Compounds via a Three-Step Reaction 1.00
Regioisomeric Control of Triexplosophoric Groups on a 1,2,4-Triazole Scaffold for an Enhanced Energy-Stability Balance 1.00
General Strategy to Synthesize Star-Shaped Nanographenes with Controllable Symmetries 0.95
Azide- and Trinitromethyl-Functionalized Bitriazoles: Environmentally Friendly High-Nitrogen Energetic Materials with Zero-Oxygen Balance 1.00
Integration of Carbonyl Groups with 1,3,4-Oxadiazoles: A Heat-Resistant Energetic Compound with Well-Balanced Performance via Heterocycle Transformation 1.00
Pushing the Performance Boundaries of Highly Energetic Bis(1,2,4-triazoles) through Merging Dual Strategies of C-Azo Bridging and iN/i-Nitramino Functionalization 1.00
Synthesis of a Cage-like High Energy Density Compound with the 2-Azaadamantane Skeleton Containing Seven Nitro Groups at All-Bridge Positions 1.00
Construction of High-Energy Low-Sensitivity Energetic Materials: Selective Nitration of Structural Isomers 1.00
Synthesis and Characterization of 1,2,4-Triazole–Furazan Compounds as High-Performance Heat-Resistant Energetic Materials 1.00
A Method for a Diamino Tricyclic Fused-Ring Energetic Material with Enhanced Stability 1.00
9 8.71
Anion-mediated solvation structures and intercalation chemistry of aqueous zinc-ion electrolytes 1.00
Magnetic field–enhanced alkaline water electrolysis from laboratory to industry 1.00
Regulating ion transport and solvation chemistry in zwitterionic gel polymer electrolyte for high-performance quasi-solid-state batteries 1.00
Eliminating intercrystalline side effects for stable lithium metal batteries 1.00
Chelation-induced anti-Ostwald ripening: Ultrafine bismuth nanocrystals for ultrastable aqueous sodium storage 1.00
A solid-state battery capable of 180 C superfast charging and 100% energy retention at –30 °C 1.00
Scalable high-voltage Zn||MnO2 batteries achieved by mild amphiphilic hydrogel electrolytes 0.91
A fire-safe Li metal battery via smart gas management 1.00
Pressure-driven electronegativity inversion in alkali liquids 0.80
5 3.14
Increasing the dimensionality of transistors with hydrogels 0.91
Trace-level halogen blocks CO2 emission in Fischer-Tropsch synthesis for olefins production 0.95
Conversion of syngas into olefins with high hydrogen atom economy 1.00
Liquid-state dipolarcaloric refrigeration cycle with nitrate-based salts 0.25
Anion sublattice design enables superionic conductivity in crystalline oxyhalides 0.03
32 25.05
Macrocycle-based covalent organic networks for ultrafast sub–1-Å precision ion sieving 0.79
Reversible aggregation-redispersion of Cu sites in Cu/CeO2 catalysts with unlocked hydrogenation activity 0.88
China’s petrochemical plants’ CO2 emissions and high-impact contributors for carbon-neutrality production 0.44
Simple mass transfer regulation achieves scaling-free zero liquid discharge of seawater desalination brine without chemical additive 0.76
A persistent-range hydrogen-bonded gel polymer electrolyte enabling wide-temperature and recyclable lithium metal batteries 0.90
Rigid-flexible heptazine-biguanide frameworks enable fast electron delocalization and low-steric-hindrance ammonium-ion storage 1.00
High-quality hydrogen peroxide production through electrochemical reduction of anthraquinone in ambient environment 0.86
In situ anchoring 2D hexagonal Zn-MOF on MXene toward robust anode-less 5 V–class Li metal batteries 1.00
Resilient high-temperature reverse osmosis desalination membranes 0.10
Manipulating metal growth in hollow ionic-electronic conductor for anode-free lithium metal batteries 1.00
Monolayer nanocrystalline graphene synthesized from pyrolyzing a Langmuir monolayer of a polyaromatic hydrocarbon 0.09
Nanofluidic-engineered carbon nanotube ion highways in hydrogels enable high-power aqueous zinc-ion batteries 1.00
Single atom–cluster synergy in Ag catalysts enables chiral glyceric acid from biomass 0.78
A high-entropy mixed ionic and electronic conductor for accelerating the cathode dynamics in all solid–state lithium metal batteries 1.00
Dual-regulated covalent organic framework membranes with near-theoretical pore sizes for angstrom-scale ion separations 0.71
Electrolyte/electrode interphase regulation with methylthiolation ionic liquids for high-voltage quasi–solid-state Li metal batteries 1.00
Nonfluorinated membrane with a decentralized ion-transport network enables efficient and sustainable polysulfide redox flow batteries 1.00
Wearable solar fluidic system 1.00
In situ unveiling the conversion processes on the catalytic cathode in lithium-sulfur batteries 1.00
Laser-architected MXene composite for photoenhanced microsupercapacitor 1.00
A practical 4.8-V Li||LiCoO2 battery 1.00
Realizing precise ion separation in polyamide nanofiltration membranes via stage control reactions 1.00
Electrostatic-driven dehydration of ions in nanoporous membranes 0.67
High-value organic solvent recovery and reuse in perovskite solar cell manufacturing 0.92
Dynamic control of lithium dendrite growth with sequential guiding and limiting in all-solid-state batteries 1.00
Pd@PdBOx heterostructure with strong electronic interaction to promote C─H bond activation for glycerol oxidation reaction 0.75
Upgrading biocrude oil into sustainable aviation fuel using zeolite-supported iron-molybdenum carbide nanocatalysts 0.05
Deciphering co-ion and counterion transport in polyamide desalination membranes reveals ion selectivity mechanisms 0.71
Alcohol molecule coupling: A universal approach to modulating amorphousness in vanadium-based cathodes for high-rate and durable aqueous zinc-ion batteries 0.09
Thin-film composite vapor-gap membrane for pressure-driven distillation 0.83
Liquid metal anode enables zinc-based flow batteries with ultrahigh areal capacity and ultralong duration 1.00
Nodular networks in hydrated polyamide desalination membranes enhance water transport 0.71
3 2.93
Assessing clean heating pathways based on improved life cycle assessment and system dynamics 0.93
High-resolution estimation of urban anthropogenic carbon emissions 1.00
Assessing Annual Carbon Emissions and its Peak Year in the Yangtze River Economic Belt (2021-2035) through Land Use/Land Cover Analysis 1.00
1 0.08
Kinetic Plasticity of Nitrite-Oxidizing Bacteria Containing Cytoplasmic Nitrite Oxidoreductase 0.08
31 29.70
Ordered Nafion Composite Membranes Doped with Ce-UiO-66: Improved Performance and Decreased H2 Crossover in PEM Water Electrolysis 1.00
Atomic Cascade Catalysts for Expedited Sulfur Conversions in Low-Temperature Lithium–Sulfur Batteries 0.93
Unveiling the Dynamic Heterogeneity and Evolution of the Solid-Electrolyte Interphase during Cycling at the Atomic Scale 1.00
In Situ Zn2+ Etching of MXene Coating Unlocks 5000-Cycle Dendrite-Free Zinc Anodes 1.00
Unraveling the Role of Residual Solvent in PVDF-Based Solid-State Electrolytes: Balance between Ionic Conductivity and Electrochemical Stability 1.00
In Situ Exsolved Ru and Ni Bimetallic Nanoparticles on Pr0.7Sr0.3CrO3 Boost the H2 Oxidation and Production in the Reversible Solid Oxide Fuel Cell 1.00
Polydopamine/Silica Coating Enhances Electrochemical and Thermal Properties of Polyethylene Separators for Lithium–Metal Batteries 0.80
Mechanistic Insights into Radical-Mediated Cracking of n-Butylbenzene over CeO2(111) toward Selective Light Olefin Formation 0.91
Relative-High Concentration Electrolytes for High-Rate Cycling of Li-Metal Batteries Guided by Diffusion NMR and EPR Imaging 1.00
In Situ Electric-Field Guided Assembly of Ordered Bilayer Solid Electrolyte Interphase (SEI) Enables High-Current Zinc Metal Anodes 1.00
Design of Open Ion Transport Channels in Thick Electrodes through Directional Freezing-Assisted 3D Printing: Enhancing the Electrochemical Performance of High-Load Electrodes 1.00
Stress-Sharing Mechanisms Governing Weak Shock Response in TATB Nanoparticles: Nanosphere versus Nanocube 1.00
AlCl4–-Intercalation Driven Molten Salt Electroetching with Closed-Loop Al Recovery 0.86
Efficient Electrocatalytic Oxidation of o-Phenylenediamine to 2,3-Diaminophenazine on Nitrogen-Doped Graphene for Low-Voltage Hydrogen Production 1.00
Molecular Dynamics Simulation and Artificial Intelligence-Driven Development of New Lithium Electrolytes with High Ionic Conductivity and Understanding Ion Transport 1.00
F-Center-Mediated Formation of Metallic Li from Solid Electrolyte Interphases under High-Energy Electron-Beam Irradiation 1.00
Corner-Sharing PS4–BS4 Modes Facilitate Fast Ion Conduction in Lithium Thioborophosphate Iodide Glassy Solid Electrolytes 1.00
Anion Engineering of Ionic Liquid-Based Polymer Electrolytes for Interfacial Stabilization in Lithium Metal Batteries 0.20
Unlocking Tetravalent Iron Reactivity at Mildly Acidic pH through Decay Kinetics Technique 1.00
Ultra-High Zinc Utilization Enabled by MXene Anode for Flexible Dual-Plating Zn–Br2 Microbatteries 1.00
Inhibiting Graphite Co-Intercalation through Weak Solvating Ether Electrolytes for Stable Cycling in Potassium-Ion Batteries 1.00
Organic Ionic Plastic Crystal Composite Solid Electrolytes with Efficient Interfacial Lithium-Ion Percolation for Solid-State Lithium Metal Batteries 1.00
Bifunctional Electrolyte Additives Modified Zinc Anode and Cathode 1.00
Intrinsic-Defect-Rich Hierarchical Porous Carbon Enabling Enhanced Power Generation in Sulfur-Based Thermally Regenerative Batteries 1.00
Nitrogen-Modulated Reaction Pathways for Densified Carbon Architectures with Enhanced Volumetric Capacity 1.00
Tri-Site Synergy in CuCoCe Catalysts: Unlocking Selective Hydrodeoxygenation Pathways of Dicarboxylic Acid Dimethyl Esters via Site-Specific Activation 1.00
How Grain Boundaries Impede Lithium-Ion Diffusion and Induce Dendrite Growth: Insights from First-Principle Calculations and Deep Potential Molecular Dynamic Simulations 1.00
Ce-UiO-66 Loaded Composite Membrane for Enhanced Proton Conductivity and Performance in Electrochemical Hydrogen Pumps via Recasting Method 1.00
Thermal Tuning of Brønsted Acidic Phosphorated Carbon Catalyst Coupled with Deep Eutectic Solvent Fractionation Boosts Heterogeneous Catalysis of Biomass toward Levoglucosenone 1.00
Temperature-Adaptive Aqueous Zinc–Iodine Batteries Enabled by Ionic Covalent Organic Framework Modified Separator 1.00
MXene-Mediated Electronic State Engineering of Nickel Hydroxide for Efficient Piezo-Catalytic Hydrogen Peroxide Synthesis 1.00
501 474.53
Pathways of Fluoride Removal and MgF2 Recovery from Fluoride-Containing Wastewater Using Different Magnesium Sources 1.00
From interfacial stabilization to maintainable operation: fouling-resilient synthetic urine valorization by bipolar membrane electrodialysis 1.00
Electronic Modulation of Internal-Driven Fenton-like Pathways in Single-Atom Enzyme Catalysis: Regulating Pathway Behavior in Multi-Emerging Contaminants Systems 1.00
Nitrous oxide mitigation in biochar–pyrite-based bioretention systems via zonal microenvironment regulation 1.00
Beyond Conventional Advanced Oxidation Processes for Reliable 2-Methylisoborneol and Geosmin: Overcoming Matrix Interference via Dual-Radical Synergy of O3/PMS Process 1.00
Unlocking the Mechanism of Nanocatalytic Fenton Oxidation and Membrane Distillation for Efficient Produced Water Treatment 1.00
Pore size-matched adsorption of organic pollutants and its pilot application in advanced wastewater treatment 1.00
In-situ chlorine-induced dynamic diatomic reconstruction for three electron transfer mineralization of high-salinity organic wastewater 0.93
The missing of iodide ions and formation of highly toxic iodinated intermediates in Bi/BiOI activated peroxydisulfate for the degradation of bisphenol A 1.00
Co-P-O Bridges Enabling Spin-Related Interfacial Charge Regulation for Synchronizing Redox Kinetics in Dual-Pollutant Purification 1.00
Mesoscopic insights into the mitigation of gypsum scaling during nanofiltration by salinity and natural organic matters for drinking water treatment 1.00
Successful control of low-temperature sludge bulking in a WWTP by installing iron–carbon polyurethane packing in the return-sludge channel 1.00
Solar-Driven Rooftop Interfacial Evaporation System for Decentralized Rainwater Purification 0.89
Optimizing mixed activation pathway by high-spin spinel oxide for low-electrophilicity pollutants removal 1.00
Dissolved oxygen prompts low-oxygen aliphatic disinfection byproduct formation by reshaping natural organic matter chlorination pathways 1.00
High-load influent driven to critical free ammonia inhibition on NOB under periodical acidic domestication for partial nitritation 1.00
Making Waves: Toward an Intelligent Operating Paradigm for Electroactive Membrane Systems 0.91
Making Waves: Harnessing the Disinfection Byproduct Chlorite as an Oxidant Precursor for Micropollutant Abatement 1.00
Loose nanofiltration membranes enabled by adaptive pore shrinkage for selective dye/salt separation 1.00
Odorous disinfection byproducts from sweet peptides during chlorination 0.71
Novel Self-driven Directed Alkalization Capacitive Deionization for Effective Removal of Amphoteric Boron 1.00
Mechanisms of aerobic simultaneous nitrogen removal under low COD/N conditions: Diffusion–reaction coupling and particle size effects via self-recirculating microgranular system 0.67
Nicotinic acid enhances heavy metal stress resilience of wastewater anammox communities via NAD+ replenishment 0.86
Side-stream fermentation drives partial denitrification/anammox for enhanced nitrogen removal and anaerobic ammonium oxidation bacteria enrichment in a flocs-based continuous-flow anaerobic/aerobic/anoxic system 1.00
Role of oxygenation reactions in chlorinated disinfection byproduct formation during vacuum UV/chlorine treatment of reclaimed water 1.00
Developing process descriptor for biological nitrogen removal in wastewater treatment 0.86
Shift of nitrogen metabolism drives the evolution of multidrug resistance in wastewater microbiomes under long-term fluoride stress 1.00
Overcoming Configuration and Fouling Limitations in Capacitive Deionization for Efficient Multicomponent PFAS Capture 1.00
Enhancing carbon allocation and utilization via a sludge-bypass anaerobic/oxic/anoxic process for ultra-efficient nutrient removal from municipal wastewater under low C/N and temperature conditions 1.00
Anaerobic/oxic/anoxic-membrane bioreactor process coupled with polyaluminum chloride for simultaneous nitrogen and F- removal in semiconductor wastewater, and membrane fouling mitigation: Performance and mechanism 1.00
Marine plastisphere expands the ecological niche and evolutionary dynamics of nrfA-dependent nitrite ammonifying bacteria 1.00
EPS-Mediated Mineralization Drives Granule Densification and Enhances Denitratation–Anammox Coupling under Alkaline Conditions 1.00
Microbial physiological responses to dense aggregates formation on micron-sized porous carrier: Roles of electron transfer and quorum sensing in enhanced nitrogen removal from high-ammonia wastewater 1.00
Discovery of halogenated cyclopentene-diones as a new class of toxic disinfection byproducts from reaction of phenols with secondary disinfectants 1.00
Mechanistic insights into sulfur-driven denitrifying phosphorus removal: Roles of zero-valent sulfur and Thiothrix in the DS-EBPR system 1.00
Solar Light Irradiation Activated Dichloramine for Efficient Abatement of Micropollutants 1.00
Harnessing membrane segregation of polysaccharide-degrading strains to mitigate fouling in membrane bioreactors: Insights from bacterial community ecology and metabolomics 1.00
Self-Powered Electron Transfer on Single-Atom Dual-Reaction Center: Achieving High-Efficiency Catalysis in Oxidant-Free Systems 1.00
Field evidence for the impact of aged cast iron pipes on emerging DBPs in drinking water distribution systems 1.00
Selective Oxidation of Aqueous Ammonium to Nitrogen by Photocatalytic Optical Fibers Modified with Z-Scheme Ag3PO4/MnO2 Composites 1.00
Tandem Synergy of Hydroxyl Radicals and Nonradical Ferryl for Efficient Photo-Self-Fenton Mineralization of Refractory Pollutants 0.91
A novel approach for achieving high enrichment of anammox and nitrogen removal rate in municipal wastewater treatment: A pure biofilm process 1.00
Unveiling in-pipe carbon-sulfur transformation and microbial function during urine transport for centralized management 0.75
Fresh-seawater interface shapes nitrogen fate in a subtropical estuary: Insights from multi-isotopic and metagenomic analyses 1.00
Deciphering Pharmaceutical Resistance in Sulfur-driven Autotrophic Denitrification: An Integrated Multi-Omics Artificial Intelligence-Driven Structural Biology Approach 1.00
Multifractal dissolved oxygen diagnostics for early warning of aerobic granular sludge destabilization 1.00
Comparison of vacuum ultraviolet-based oxidation as ultrafiltration pretreatment in real water: Performance, risk assessment, and mechanistic insights 1.00
Anthraquinone-2-sulfonate enhances endogenous denitrification and phosphorus removal: Electron shuttle-mediated syntrophic partnerships 1.00
Targeted degradation of aromatic pollutants in complex matrices via selective electrocatalytic O2 activation to 1O2 over O-doped Fe single-atom catalysts 1.00
Selective Separation of Naphthalene Sulfonic Acids and Salts from Wastewater by Electric Field-Assisted Nanofiltration Membranes 1.00
Engineering the anammox pathway in a full-scale AOA process for industrial wastewater treatment 1.00
Sequential Oxidation and Crystallization Based on Split-flow Electrochemical Oxidation with Rapid Filtration for Sustainable Phosphate Recovery from Phosphonate 1.00
Denitrification mode management selects resource-conserving consortia for low-carbon municipal wastewater treatment 1.00
Dissolved organic matter treatability and disinfection byproducts formation potential: Role of floc aging 1.00
Stable functional consortium assembly via uncoupled SAD/anammox inoculation drives synergistic nitrogen‑sulfur removal in sediment 1.00
Ectoine Modulates Mixotrophic Denitrification Pathway Partitioning to Sustain Stable Nitrogen and Phenol Removal under Hypersaline Stress 0.74
Self-Supported Zeolite Fibers with Multiscale Porosity Boosting Mass Transfer and Stability for Environmental Pollutants Removal 0.88
Z-scheme heterojunction SA-PPy-CN@MF photothermal-photocatalytic evaporators for efficient seawater desalination and wastewater treatment 1.00
Atomically Engineered Fe/Mn Catalysts Enable Ultrafast Self-Sustaining Water Purification via Oxidant-Free Fenton-like Electron-Transfer Reaction 1.00
Fe-N-C-supported LaFeO3 heterojunction electrodes for efficient copper and fluoride removal in symmetric capacitive deionization 0.83
Pore engineering and charge attenuation for covalent organic framework membranes: A new approach to high-performance molecular–ion separation 1.00
Tuning the interface of graphite felt-supported NiCo composites for superior electrocatalytic degradation of pharmaceutical pollutants 1.00
Phosphorus solubilization from sewage sludge via pH-controlled microwave treatment for vivianite recovery 0.63
Chloride ions accelerated the removal of naproxen in Cu(II)/peracetic acid system: Promotion of copper cycling through the formation of copper-chloride complexes 1.00
S⁰-S²⁻ co-substrate system achieves efficient nitrite accumulation under high alkalinity and ultra-short HRT: multidimensional responses and metabolic regulation mechanism 1.00
A Selective Oxidation Strategy for Deciphering the Structure-Function Relationships of Dissolved Organic Matter 1.00
Feedforward fouling control guided by online UV and fluorescence spectral early warning for low-energy operation of membrane bioreactor 0.81
Scalable and hardness-tolerant H2O2 electrosynthesis in tap-water-based electrolytes enabled by electrode architecture and reactor engineering 1.00
Light-driven community assembly and functional performance of aeration-free filamentous algae–partial nitrification/anammox granule 1.00
Unveiling the significant role of N-monochlorinated primary amines in nitrile and nitroalkane formation in the UV/chlorine process 1.00
Phenoxyl Radical-Mediated Peroxymonosulfate Activation for Efficient Water Remediation 1.00
From persistence to reactivity: halogen-regulated photosensitization of xanthene chromophores for sustainable water purification 1.00
Effects of square-wave excited alternating magnetic fields on calcium carbonate crystallization and their application in scale inhibition 1.00
A new perspective on real-time monitoring and function interpretation of nitrification based on machine learning and mass-to-charge fingerprint 1.00
Heteroatom-doped Co-N-C single-atom catalysts achieve robust peracetic acid activation for sustainable water decontamination 1.00
Control of aromatic halogenated disinfection byproducts in chlorinated and chloraminated drinking water through pre-oxidation: Effects and mechanisms 1.00
Ultrafast antibiotic resistance removal from water via activation of low-dose percarbonate by bismuth oxyiodide with optimal Bi3-oxygen vacancy sites 1.00
Tailoring COFs for highly selective generation of singlet oxygen to boost antibiotic removal: Spatial regulation of PMS and photogenerated carriers 1.00
Making Waves: Electric-field-programmable membrane interfaces for fouling control 1.00
Molecular-Level Insights into Oxidant Sensitivity of Algal Extracellular Organic Matter and Disinfection By-Product Formation during Chlorination/Ozonation 1.00
Synergistic nitrogen removal by robust heterotrophic nitrification-aerobic denitrification and substantial assimilation in a novel Zobellella sp․ 1.00
Oxygen Stress Drives Overcompensation of Carbon Sources for Enhanced Polymer Denitrification 1.00
Dual-interface regulation of two-dimensional ZIF-based composite membranes for efficient and stable pervaporation desalination 1.00
Interface-Engineering Induced Medical Wastewater Purification and Ammonia Recovery via Selective Hydroxyl Radical Generation 1.00
Mitigating Mammalian Cell Cytotoxicity of Drinking Water upon Chlorination by Conventional and Advanced Treatment Processes 1.00
Elucidating an Unrecognized Iron Leaching Mechanism via Sequential Reduction-Oxidation of Passivation Layer on Stainless-Steel Cathodes for Electro-Fenton Process 0.75
Integrated in-situ Electrochemical-Membrane Process for Ammonia Valorization and Sustainable Water Reuse 0.69
Self-enhanced phosphonate degradation in mZVI/air-Fenton process: The role of coordination for mZVI corrosion and iron-sludge reduction 1.00
Mixotrophic Partial Denitrification Coupled with Anammox Achieves Robust Nitrogen Removal under Organic-Rich Conditions: Insights into Metabolic Adaptations of Sulfur-Oxidizing and Anammox Bacteria 1.00
Synergistic non-Faradaic and Faradaic Processes for Efficient Phosphate Recovery and Fouling Control in Capacitive Deionization 0.93
Sustainable alternative to biological nitrogen removal: Is ammonia recovery from municipal wastewater a fantasy? 1.00
Integrated fabric distillation-crystallizer for zero liquid discharge of hypersaline brines 0.75
Whole-process ultrafast charge transfer for seconds-scale degradation in mineral processing wastewater: Piezo-phototronics effect on Ce-Fe dual active centers 1.00
Making waves: Re-envisioning adsorption modeling at a crossroads for embracing advanced adsorbents in next-generation water treatment 1.00
Mainstream partial nitritation and anammox sustains competent nitrogen removal capability under recurrent seawater intrusions 0.42
An N2O emissions model featuring newly integrated abiotic pathways in nitrification 0.88
Temperature and substrate jointly shape significant anammox contributions to nitrogen removal in hot springs 1.00
Asymmetric Fe–N3C coordination in Fe single-atom sites boosts electrochemical activation of H2O2 for efficient •OH generation 1.00
Detoxification mechanism of semi-coking wastewater by hydrogel-assisted SNAD process via iron‑mediated coordination adsorption: Performance, microbiota interaction, and molecular docking 1.00
Overlooked ecological roles of micro-particle–associated microbiota in sustaining reactor performance in submerged anaerobic membrane bioreactors 1.00
Temperature-Dependent Effects of Lanthanum-modified Bentonite on Sediment Nitrogen Removal Processes and the Underlying Microbial Mechanisms 1.00
Synthesis of Thin Film Composite Membranes via Acid-Assisted Interfacial Polymerization for Water Desalination 1.00
CFD-PBM-ASM2 Integrated Model Reveals the Influence Mechanisms of Bubble Size Distribution on Oxygen Mass Transfer and Pollutant Removal in a Full-Scale A²O Bioreactor 1.00
Improving the accuracy of greenhouse gas accounting for wastewater treatment plants: seasonal differences must not be overlooked 1.00
Linking ecological strategies to niche breadth: interpretable machine learning unravels community patterns of nirS-type aerobic denitrifiers along oxygen gradients in drinking water reservoirs 1.00
Nitrogen and DOM inputs alter greenhouse gas dynamics in field scale constructed wetlands treating wastewater plant effluent: insights from core species activity 1.00
Interface Synergetic Adsorption and Catalysis Achieve Efficient Ozone Decomposition: Surface Atomic Oxygen-triggered Hydroxyl Radicals Increment for Dependable Water Purification 1.00
Ternary Network Derived from Polyphenol-Inspired Sticky Nanoparticle: Nanofiltration Separation Efficiency and End-of-Life Membrane Regeneration Potential 1.00
Removal, transformation and toxicity changes of halobenzoquinones by digestive enzymes 1.00
Interactions Between MnO₂ and Tire Wear Particles: Mutual Impacts on Aging and MnO₂ Structural Transformation 1.00
Nanoconfined bimetallic functionalized ceramic membrane with O3 micro-nano-bubbles for synergistic treatment of highly-salinity wastewater 1.00
Nitrogen-removal collapse and recovery: Integrative meta-omics insights into seasonal microbiome dynamics and cold-adaptive mechanisms in a full-scale activated sludge system 1.00
Interfacial Hydrophobicity-Induced Desolvation Effects on Reductive Dehalogenation by Zero-Valent Iron 0.75
Impacts of typical nitrogenous disinfection byproducts on advanced nitrogen removal in constructed wetlands: Insights from microbial activity and community response 1.00
Amide Heterocyclic Disinfection Byproducts with Overlooked Disinfectant Capacity during Chlorination 1.00
Control of Algal-Derived Disinfection By-Products with a Composite Coagulant: Insights into the Mechanism from a Molecular Perspective 1.00
Mechanistic insight into Fe(III)-DOM complexes modulated UV/chlorine for promoting oxidative capacity and reducing DBPs formation 1.00
Phenylalanine or nitrate as the major nitrogen source? Occurrence and formation of overlooked yet toxic nonhalogenated nitro(so)-byproducts in UV/Chlorine-treated drinking water 1.00
Novel air gap membrane absorption structure for ammonium salt crystallization 1.00
Amoeba-inspired nano-robots for trace low-molecular-weight emerging contaminant removal from water 0.50
Dual-Stage Electrochemical System Enabling Reagent-Free Nickel-Ammonia Decomplexation and Resource Recovery 0.88
Nanoconfinement Engineering Enhances HFO Stability: Dual Proton-Sponge and Size-Exclusion Strategy for Robust Heavy-Metal Sequestration in Real Electroplating Effluents 1.00
Development and Long-term Technical Validation of an Automated Bioelectrochemical System for Online BOD Monitoring of Wastewater Hydrolysis Acidification Effluent 1.00
Transient Calcium Crusts in PD-HAP Granules: Mechanisms and Self-Regulatory Recovery 0.86
Betaine-Modified La-doped Ferrihydrite for Efficient Phosphate Removal to Ultralow Levels 0.80
Synergy of Super-Liquid-Repellency and Nanoscale Sieving in a Sandwich-Architectured Janus Membrane for Stable Membrane Distillation of Hypersaline Wastewater 0.81
In-Situ Sulfur Implantation Efficiently Promoting Nitrogen Removal in Low-Carbon Anoxic-Oxic Systems 1.00
Moderate activation and mutual promotion of aluminum-iron covalent-bond coagulant with K2FeO4 for enhanced organic arsenic removal: Selective truncation-repolymerization of Fe(Ⅳ)/Fe(Ⅴ) and enhanced coagulation 1.00
Exploring efficient mainstream nitrogen removal by partial nitrification/anammox under limited COD condition in a pilot-scale membrane aerated biofilm reactor 1.00
Easy and Resilient Spatio-temporal Water-Salt Separation and Collection via Hydrothermal All-in-one Cubic Biomass 0.82
3D Porous Cellulose/Polyaniline Aerogel Composite as a High-Performance Electrode for Selective Electrosorption of Rhenium 1.00
Electrochemical Degradation of Perfluorooctanoic Acid: Fluorine Mass Balance and Strategies to Limit Short-Chain Byproducts 1.00
Quantifying the Contributions of Fe(VI), Fe(V), and Fe(IV) in Contaminant Oxidation by Ferrate: A Kinetic Insight 1.00
Can fungal degradation replace conventional biological processes for treatment of highly acidic and saline preserved fruit processing wastewater by virtue of Candida, Pichia and Saccharomyces? 1.00
Ammonia and N₂O Production Pathways in Quaternary Hill–Plain Groundwater: Evidence from Multi-Isotope and Isotopomer Analysis 1.00
Enhanced Modeling of Chlorine-Organic Reaction Kinetics to Assess the Fate of Environmental Chemicals in Disinfection Process 0.79
Dual-mode light-responsive chitosan-based hybrid hydrogel for efficient solar-driven water evaporation and multifunctional water purification 1.00
Trace carbonyls in water reuse: structure-dependent multi-barrier penetration and enhanced deep mineralization via dual-radical oxidation synergism 1.00
Modelling of wastewater transformations in gravity sewers and full-scale sewer network applications: assessment and implications of pollutant collection rate 1.00
Long-term potassium ferrate exposure on primary sludge acidogenic fermentation: the interplay of Fe and alkaline conditions 1.00
Elucidating the Role of Reactive Nitrogen Species in Micropollutant Degradation Using Machine Learning 1.00
Irreversible Membrane Damage Resulting from the Scaling of Calcium Sulfate in Membrane Distillation: Mechanistic Duality of Sodium Chloride as a Background Electrolyte 1.00
CO2-driven hybrid ion exchange: A resilient reverse osmosis pretreatment for high-recovery wastewater reuse 0.25
Fe(VI) Oxidation of Mixed Trace Phenols: Kinetics, QSAR Modeling, and Cross-Polymerization Mechanisms 1.00
Surface Charge Modulated Hydrogel for Faster Atmospheric Water Harvesting 1.00
Exploring utilization of modified ferrous sulfide-based materials in constructed wetlands to enhance nitrogen removal: Performance, microbial species interactions and community assembly mechanisms 1.00
Highly selective and ultimate removal of typical PFAS from drinking water using anion exchange resins with long alkyl chains 1.00
Multiscale thermodynamic insights into membrane fouling control by biochar-activated peroxymonosulfate pretreatment: Synergy of oxidation and adsorption 1.00
Niche differentiation drives microbial community assembly in an anaerobic/oxic/anoxic-aerobic granular sludge (AOA-AGS) system: Insights into Anammox self-enrichment 1.00
Constructing the purification-permeability balance via polymerization route: a novel confined layered double hydroxide catalytic membrane incorporating single-atom iron 1.00
Electrically conductive membrane-based anammox MBR with electrochemical assistance: an effective strategy for simultaneous mitigation of membrane fouling and enhancement of nitrogen removal 1.00
Quinone structure regulates sulfide-driven reactive oxygen species generation for aquatic pollutant degradation 1.00
Enhancing nutrient removal in continuous-flow anaerobic/aerobic/anoxic processes treating low C/N ratios wastewater via side-stream light irradiation: NOB suppression and PHA metabolism stimulation 1.00
Crystal seed-augmented microporous cathode design for enhanced phosphorus crystallization and energy-efficient recovery 1.00
Self-regenerable zeolite Beta(35) for efficient adsorption and photocatalytic degradation of PFOA under simulated solar irradiation 1.00
Insight into the Al-Fe dual-anode hybridperoxicoagulation-ozonation process for landfill leachate wastewater treatment: Quantitative analysis of reaction pathways and synergistic mechanism 1.00
An unveiled trade-off of biochar properties for selective oxidation of wastewater beyond Fenton-conditioned dewatering of sewage sludge 0.83
Breaking the Permeability-Selectivity Trade-off in Loose Nanofiltration: Zwitterionic Layer-by-Layer Membranes for Superior Antifouling Dye/Salt Separation 1.00
New insights into the electron-transfer mechanism of Cr(VI) activation by carbon materials for simultaneously enhanced Cr(VI) detoxicate and acetaminophen oxidation: the role of defect structures 1.00
Up-scaling of a Photoelectrochemical System with Regulated Chloride Activation for Negative-emission Saline Sewage Treatment and Disinfection Byproduct Mitigation 1.00
In-situ vacuum-assisted fabrication of highly selective hollow fiber nanofiltration membranes for removing polyfluoroalkyl substances 1.00
Boron mining from wastewaters and brines – technical and economic assessment of extraction strategies 0.08
Multi-spectroscopy reveals selective oxidation for ultrafiltration membrane fouling control in wastewater reuse 1.00
Revealing the Optimal Ratio of Aged-to-Fresh Carbon in BAC Filtration: Linking Biofilm Development, iDNA/eDNA Community Dynamics, and Purification Performance 1.00
Synergistic Water Activation on High-Entropy Alloy Oxides Enables Ultralow-Enthalpy Solar Desalination 1.00
Bioturbation-Resilient Phosphorus Control in Eutrophic Sediments Using Industrial Waste-Derived Calcium Silicate Hydrate 1.00
Nanobubble Aeration Accelerates Manure Wastewater Sanitisation and Enhances Nitrogen Retention while Reduces Greenhouse Gas Emissions 1.00
Scalable and Sustainable Cellulose Xerogels for High-Capacity Enrichment of Per- and polyfluoroalkyl Substances 0.89
Enhancing floc growth by oxidative and reductive modification of organic matter structure 0.80
Tackling Data Scarcity in Wastewater Treatment Resulting from Time-delay: A Semi-Supervised Collaborative MTN-MRR Framework with Batch Consistency Confidence 1.00
A Review of Ecotoxicity and Developmental Toxicity of Disinfection Byproducts (DBPs): Are Aromatic DBPs More Toxic Than Aliphatic DBPs? 1.00
Frequency-based Paired Mass Distance Method Revealed the Transformation Pathway Selection of Organic Compounds During Mineralization Treatment 1.00
Orchestrating the continuous self-circulating granular sludge process: An intelligent platform for real-time adaptive control 1.00
Efficient demulsification of emulsified oil wastewater by graft-functionalized β-cyclodextrin flocculants: The effect of charge density, hydrophobicity, and graft chain length 1.00
Freezing-modulated cycle of manganese species for enhanced non-radical oxidation of micropollutants in the peracetic acid/Mn(IV) system 1.00
High-level chloramphenicol degradation in mariculture wastewater via cathodic nitro-reduction in a single-chamber bioelectrochemical system 1.00
Mainstream Anammox Achieved in a Two-Stage Acidophilic Partial-Nitrification/Anammox System: Ultra-High Enrichment of Anammox Bacteria and Identification of a Potential Novel Acidophilic Ammonia-Oxidizing Bacterium 1.00
Comprehensive Assessment of Electrochemical Disinfection for Real Secondary Effluent: More Efficient with Reduced Secondary Chemical Risk? 1.00
Efficient generation of highly reactive FeIVO2+ via the Fe(II)/Cl2 reaction for water purification 1.00
In situ Catalytic Ozonation Driven by Ferrous Hydroxyl Complex Decomplexation for Simultaneous Removal of Heavy Metals and Organics 1.00
Functional imbalance between Thauera and anammox governs PD/A pathway stability under contrasting reactor modes 1.00
Beyond phase separation: New insights into chlorinated compound formation during Fe(III) coagulation with landfill leachate 1.00
Visualizing the transformation of reactive species in PMS/Cl− system via in-situ EPR spectroscopy: Direct detection and mechanistic confirmation of HO• 1.00
Metagenomic Insights into the Global Distribution and Functional Potentials of Major Polyphosphate-Accumulating Organisms (PAOs) in Activated Sludge Wastewater Treatment Plants 0.79
Overcoming temperature and substrate limitations of anammox via partial denitrification: stable performance, microbial structure, and N2O mitigation 1.00
Exploring N-nitrosodimethylamine formation induced from water flocculants by isotope tracking and spectral analysis 0.80
Comparative insights into denitrification performance and microbial adaptation of heterotrophic, autotrophic, and mixotrophic systems under florfenicol stress for recirculating mariculture wastewater treatment 1.00
Enhanced Antifouling Performance of Ultra-thin Antimicrobial Peptide Membrane through Chemical-crosslinking Layer-by-Layer Assembly 1.00
Limited organics shaped microbial mutualism for enhanced nitrate and Cr(VI) co-reduction in a sulfur-driven biosystem 1.00
Direct electron transfer for catalytic ozonation with Mn3Al2(SiO4)3 ceramic membranes to achieve rapid water purification 1.00
Halophytes Regulate Microbial Synergy to Enhance N Removal and Mitigate Greenhouse Gas in Low C/N Mariculture wastewater: Revealed by Isotopic amp; Metagenomics 1.00
Water Flow-Driven Electrocatalytic System Coupling Redox Processes for the Deep Mineralization of Halogenated Organic Compounds 1.00
Synergistic inactivation of Aspergillus niger spores by low-dose ClO2 and photocatalysis via interfacial electron transfer 0.83
Exploiting the Self-driven Potential of Secondary Effluent Organic Matter for Peroxymonosulfate Activation and Sustainable Wastewater Purification: Mechanism and Molecular-Level Transformation 1.00
Microbial Self-Regulation and Electron Transport Reconstruction under Cr(VI)-4-CP Stress: From Synergistic Inhibition to Antagonistic Interaction 1.00
Heterogeneous Evaporator with Low Heat Conduction Loss for Efficient Solar Desalination 1.00
Surfactant-regulated electrospray printing PEI-TMC nanofiltration membrane for efficient separation of Mg2+/Li+ 1.00
Beyond Traditional Biological Nutrient Removal Limits: Achieving Ultra-Low Effluent Nitrogen via an Anaerobic/Oxic/Anoxic (AOA) Process in a Pilot-Scale System Treating Municipal Wastewater 1.00
Sulfidation of Fenton-Derived Iron Sludge to Activate Peroxymonosulfate for Enhanced Chloramphenicol Degradation: Mechanistic Insights and Life Cycle Assessment 1.00
High efficiency capture of COD and phosphate in real domestic wastewater by Fe(VI)/PAC combined with high-rate contact stabilization process: Performance and mechanism 1.00
Enhanced Nitrogen Removal in a Micro-Polluted Drinking Water Reservoir by a new WLA-Bio® system: Mechanisms and Applications 1.00
Effect of Media Age on Cytotoxicity of Drinking Water Treated by Biological Activated Carbon Filters and Chlorine Disinfection 1.00
Formation mechanisms of dense biological flocs in a full-scale wastewater treatment plant employing hydrocyclone and chemical phosphorus removal 0.67
Unraveling the mechanism of dissolved organic matter in enhancing nitrogen removal from leachate wastewater treatment via aerobic granular sludge process 0.89
MOF-derived Fe-Cu doped biochar composites for synchronous adsorption, electro-Fenton oxidation and in-situ regeneration for efficient antibiotic removal 1.00
Hofmeister effect of anions on the layer-by-layer nanofiltration membranes: Assembly kinetics and micropollutant removal 1.00
Superwetting-assisted preparation of high-density ultra-short zwitterion grafted membranes with outstanding antifouling performance 1.00
Production of hydroxyl radicals by the oxygenation of FeS and the effect on sulfide removal in sewer systems 0.33
Unraveling tetracycline-induced biofilm stability and resistance mechanisms in aerobic granular sludge via proteomics 1.00
Efficient biological nitrate removal from hypersaline streams: Denitrification performance and bacterial community succession 1.00
Development of a novel and highly efficient catalyst-free mediated “oxidant-oxidant” process for enhanced decontamination of water contaminants 1.00
Enhancement mechanism of iron autotrophic denitrification system based on resource utilization of waste membranes 1.00
A novel carbon-negative side-stream MBMBR process for municipal wastewater reclamation driven by biopolymer and nutrient recovery 0.82
Optimizing O3-UV process for wastewater advanced treatment with a novel mini-fluidic experimental system to minimize energy consumption: Chemical oxidation vs. advanced oxidation 0.88
Electrochemical system with moderate ozone generation and catalytic enhancement for efficient organic wastewater treatment 1.00
UV254-induced peptide bond cleavage: A critical pathway for N-DBP precursor formation from N-chloro-peptides 1.00
Advancing sustainable nutrient recycling and carbon neutrality: urea recovery and hydrolysis inhibition via a novel urea electro-forward osmosis system (UEFOS) from source-separated urine 1.00
An Efficient Strategy to Separate Nanoplastics from Water Using Anisotropic Magnetic Janus Particles 1.00
Pyramidal array Janus hydrogel-based solar evaporator via broadband light trapping inspired by durian peel for efficient seawater desalination 1.00
Deciphering the synergy between autotrophic and heterotrophic electron donors in pyrite driven mixotrophic denitrification for advanced nitrogen removal 1.00
Organic matter-driven hydroxyl radical generation enhances emerging pollutant removal in plant rhizosphere of constructed wetlands: Coupled direct and indirect effects 1.00
Small is better: Impact of polyelectrolyte Mw on layer-by-layer nanofiltration membranes for PFAS removal 1.00
Integration of Aerobic Riverbank Filtration and Ultrafiltration for Advanced Water Treatment and Membrane Ageing Reduction 0.83
Efficient and sustained disinfection via peroxymonosulfate activation with minimal bromide: From laboratory to pilot scale 1.00
Biofilm increases N2O production in a sidestream partial nitritation system under low dissolved oxygen conditions 0.88
Modular Gradient-Porous Evaporator for Efficient Solar Desalination and Autonomous Salt Harvesting from High-Salinity Brine 1.00
COF Gel-Based Hygroscopic Composites for High-Performance Solar-Driven Atmospheric Water Harvesting 1.00
Making waves: Biological elemental sulfur disproportionation makes elemental sulfur-based biotechnologies more practically attractive for water/wastewater treatment 1.00
ASSR-mediated sludge yield reduction couples deterministic enrichment of Nitrospira with metabolic resource partitioning 1.00
Removal performance, molecular characteristics, and microbial mechanisms of dissolved organic nitrogen from secondary effluent in a pyrite-based autotrophic denitrification constructed wetland 1.00
UVB-activated permanganate enables rapid emerging organic contaminants decontamination through synergistic HO• and reactive manganese species 1.00
Aqueous Transformation of Phenolic Pollutants on Biochar via Dissolved Oxygen-Driven Polymerization 1.00
Construction of a novel dual S-scheme CdS@Si-α-Fe2O3/ZnO heterojunction for visible-light-driven photo-Fenton degradation of ciprofloxacin 0.80
Dispersion-regulated, entropy-controlled synthesis of polytitanium coagulants for advanced water treatment 1.00
Carboxymethyl cellulose-stabilized microbial synthesis of FeS-based biocomposite materials: synthesis, characterization and photocatalytic reduction of hexavalent chromium 1.00
Potential impact of Eucalyptus plantations on water quality and the formation of toxic disinfection byproducts during drinking water treatment 1.00
Boosting organic micropollutant removal and separation performance of polyamide nanofiltration membranes through hydrogel interlayer construction 1.00
Dual-Biomimetic Synergistic Structured Aerogel for High-Performance Solar-Driven Water Purification and Power Generation 1.00
Performance, metabolism, and resistance of an SMX-stressed continuous-flow AGS-MBR system: Microscopic mechanism of macroscopic instability phenomena 1.00
A Solar-Driven System with a Closed-Loop Water Cycle for Passive and Sustainable Saline Soil Remediation 1.00
Electro-Mediated Biological System Coupled with Arrayed Tubular Electrode Module for Enhancing Pharmaceutical Wastewater Treatment: Pilot-Scale Performance and Electrically-Driven Metabolic Mechanisms 1.00
The controllable generation of ·OH in NH2OH-enhanced Fe(III)/H2O2 system: the overlooked role of N-containing species 1.00
Enhancing oil-water separation via droplet coalescence regulated by particle self-rotation in swirling fields 1.00
Temperature effects on ozonation: Impacts on kinetics of organic amines abatement, bromate formation and disinfection 0.50
Synergy of solar interfacial evaporation and hydrovoltaics in MOF-303 hydrogel for simultaneous desalination and electricity generation 1.00
Cross-scale synergistic detoxification mechanisms of electric field in alleviating the inhibitory effects of oxytetracycline on anammox consortia 1.00
Synergistic Ti₄O₇ Anode and Waste Al Can Cathode for Enhanced Phosphonate Degradation and Hardness Removal 1.00
Enhanced defluoridation using covalently bonded organosilicon-bimetallic composite coagulants: Al-Mg and Al-Fe driven divergence in hydrolysis speciation and active site substitution pathways 1.00
Low-Cost, Scalable Fabrication of Antibacterial Asymmetric Hydrogels Inspired by Mangrove Systems for Superior Oil-Water Separation and Salt-Tolerant Evaporation 1.00
Virus-induced redox cycling in Fe(II)/peracetic acid systems: dual roles as reactant and catalytic promoter 0.63
Selective separation of organics and salts in high-salinity organic wastewater by nanofiltration: A practical attempt and perspectives 1.00
Manganese oxide activation of peroxydisulfate: Evaluation via redox potential difference (ΔE) index 1.00
Coagulant-Specific Intracellular Release and Capture Dynamics in Algae Removal: Insights into Process behavior and mechanism 1.00
Comammox ammonia oxidization and N2O production in vadose and saturated zone soils 1.00
Unveiling p-phenylenediamine rubber antioxidants as precursors of disinfection byproducts: kinetics, formation, and toxicity 1.00
Nickel-iron Prussian blue composite membranes with ion-sieving channels for targeted cesium ion capture in aquatic systems 0.90
Cost-Effective H2O2 Electrosynthesis in Seawater for Ballast Water Treatment 1.00
Mechanistic insights into the transformation and toxicity evolution of IPPD-Q during chlorination and chloramination in drinking water 1.00
A universal model to predict DOC removal by coagulation based on UV-Visible absorption spectrum 0.83
Efficient PFOA decontamination using photoelectrocatalytic coupled PMS activation: Unleashing electrons and superoxide radicals for rapid degradation 1.00
Synergistic suppression of nitrous oxide and residual nitrate in DNRA-enhanced MABR-PN/A hybrid systems 0.86
Architecting Asymmetrical Janus Membrane for Robust Membrane Distillation Desalination with Enhanced Anti-fouling Performance 1.00
Fe(Ⅱ/Ⅲ) cycling-based buffering strategy to mitigate sulfide and nitrate overflow in sulfur autotrophic denitrification process under wastewater quality fluctuations 0.92
PEI-grafted graphene oxide modified phosphogypsum for the adsorption and removal of heavy metals and dyes in wastewater 1.00
Dual sludge system driven NDFO-Feammox coupling: Optimization of the iron cycling network for sustainable and efficient nitrogen removal 0.88
Bromate-reducing capability of nitrate/nitrite-dependent methane driven membrane biofilm reactors 1.00
Role of 222 nm UV irradiation in triggering trichloronitromethane formation in algal organic matter 0.83
Unraveling Organic Fouling in Membrane Distillation: In Situ Dynamics, Predictive Modeling, and a Self-Limiting Regime 1.00
Phosphorus recovery from wastewater using waste gypsum via sulfur-metabolizing bacteria: Influence of gypsum type on performance and mechanisms 1.00
A new linear growth theoretical model of protein reversible fouling layer in protein wastewater ultrafiltration: fouling mechanism prediction for different proteins and pressures 1.00
Fe0 and carbon defects synergistically powered electrochemical system efficiently generates singlet oxygen for low-cost purification of medical wastewater 1.00
Dual-anode electrochemical strategy enables simultaneous carbon and nitrogen removal from biologically treated landfill leachate 1.00
Promote Heterogeneous Nucleation of Struvite in Livestock Wastewater by Regulating the Surface Properties of Suspended Particles with ultrasound-assisted pretreatment 1.00
Rejection of geosmin and 2-methylisoborneol by polyamide membranes in drinking water treatment: Performance-energy efficiency evaluation and practical implications 1.00
Regulation of nitrite accumulation in sulfur-corncob biofilters: Effects of sulfur-to-corncob ratios and free ammonia (FA) concentrations 1.00
Alcohols as Reactive Species Modulators: Rethinking Quenching in UV/Chlorine Process 1.00
Elucidating disinfection byproducts formation during UV/dichloroisocyanurate treatment of dissolved organic matter 1.00
Enhanced norfloxacin oxidation with an Fe(VI)/peroxydisulfate-quinone process: iron species-driven multi-oxidation, quinone-based regulation, and density functional theory analysis 0.86
Facilitating redox cycles of copper species by peroxydisulfate in the copper-catalyzed Fenton-like system for enhanced oxidation of organic contaminants 1.00
Spatiotemporal modeling of oxygen transport and layered regulation in tidal flow constructed wetlands 1.00
Selective Elimination of Aniline Contaminants Induced by Semiquinone Radicals during Peracetic Acid Oxidation of Dihydroxybenzenes 0.88
Engineering built-in electric fields via tuning electronic structure in activated carbon supported sulfidized nanoscale zero-valent iron for highly efficient removal of florfenicol under ambient conditions 0.89
Impact of water matrices on micropollutant oxidation by Far-UVC/peracetic acid versus UV254/peracetic acid processes: Kinetics modeling and mechanism 1.00
Carbon nanotubes redirect electrooxidation pathways from mineralization to polymerization for efficient phenolics removal 1.00
Reviving LiFePO4 electrode for long-term natural brine lithium extraction: mechanisms of impurity-ion induced attenuation and redox-mediated in-situ revitalization strategy 1.00
Highly selective and chlorine-resistant polyamide reverse osmosis membranes for advanced water treatment via Fenton-assisted aromatic amine surface engineering 1.00
Peroxymonosulfate activation via non-contact electron transfer process (NCETP) for efficient organic pollutant removal 1.00
System-dependent divergence of microbial community and resistome in two anaerobic niches under sulfamethoxazole selection 1.00
Breaking redox compromise in real scale up wastewater with Cr(VI) and antibiotic: Interfacial charge regulation mechanism 0.89
Enhancing Staphylococcus succinus tolerance via pre-mineralization for bioflocculation-based oilfield water treatment 1.00
Oxalate-tailored microenvironment engineering of zero-valent copper for enhanced molecular oxygen activation 1.00
Boosting enhanced capacitive deionization of H2TiO3/carbon electrodes by yolk-shell construction 1.00
Fixed-bed catalytic antibiotics detoxification through singlet oxygen-mediated nonradical oxidation: Mechanisms and long-term performance 1.00
Efficient and selective phosphate removal via scalable alkanolamine modified La-clay: Insights into protonation gradients at the inner Helmholtz plane 1.00
Electron spin polarization of C-doped carbon nitride enhancing PMS activation for deep degradation of emerging contaminants 1.00
Porous sulfur composites with built-in buffering unlock high-efficiency autotrophic denitrification across water alkalinity regimes 1.00
Unveiling decrosslinking degree on polyamide nanofiltration membranes: Structure–performance relationship and micropollutant removal 0.91
Unveiling the kinetics and mechanism of carbonate radicals in antibiotic resistance dissemination 1.00
Selective silver recovery through single-pyrrolic nitrogen engineered carbon electrodes: A capacitive deionization breakthrough 0.67
Dynamic redox regimes drive metabolic versatility of a Candidatus Brocadia in municipal wastewater treatment 1.00
Interfacial electron redistribution allows advanced phosphate adsorption in Zn/La-loaded magnetic mesoporous nanospheres 0.83
Interplay of charge composition and nanochannel confinement in ion separation through graphene oxide membranes 0.23
A novel flexible branch-pinecone nanostructured UiO-66-MCA composite nanofiber membrane with bacteriostatic property for effective removal of salicylic acid 0.88
Computer vision-assisted sorting and selective cultivation of high-activity anammox granules 1.00
Simultaneous control of organic chloramines and emerging contaminants in swimming pool water using far-UVC irradiation 1.00
Chitosan-interpenetrated metal organic framework for targeted recovery of gold from gold-electroplating wastewater 1.00
Overlooked role of singlet oxygen in electrochemical processes for efficient sludge dewatering at neutral pH 0.75
Graphitic biochar-anammox achieved by multi-heme-based extracellular electron transfer 0.38
Copper-enhanced ferrihydrite Fenton generates dual oxidants for pollutant degradation via surface affinity differentiated pathways 1.00
Enhanced venlafaxine degradation in amorphous FeS2 under redox-dynamic aqueous environments: Critical role of citrate in electron utilization for boosted hydroxyl radical generation 1.00
Unveiling the overlooked impact of idle phase on partial nitrification in sequencing batch reactor: Insights from systems with varying operation modes 1.00
A wood-based evaporator with robust photothermal layer enabling efficient solar evaporation and antibiotic photodegradation 1.00
Bio-derived phytic acid synergistic peptide decorated polyamide membrane for enhanced permeance and antimicrobial properties 0.86
Elemental sulfur enhances autotrophic denitrifying phosphorus removal from carbon-deficient wastewater through microbial synergy and electron transfer optimization 1.00
Molecular-level mapping of high-valent metal-governed reaction patterns of micropollutants and dissolved organic matter 1.00
Storm-driven overflow disinfection highlights toxicity risk of chlorophenylacetonitriles: Unveiling indole in sewer sediments as a key precursor 0.88
Bioinspired polyethylene/boron nitride woven mesh integrating heterogeneous wettability and radiation cooling for water recycling of cooling tower 1.00
Assimilation overwhelms nitrification in saline wastewater nitrogen removal: From heterotrophic nitrification and aerobic denitrification strains to microbiomes 0.89
Credibility-driven identification of cropland runoff source in surface waters using ANN-XGBoost model ensemble powered by microbial fingerprints 1.00
Tailoring nanofiltration membrane via low temperature-assisted layer-by-layer interfacial polymerization for highly efficient ion selective separation and resource recovery 1.00
Selective sampling and in-situ detection of As(III) and As(V) in groundwater by diffusive gradients in thin-films technique 1.00
Lanthanum-quaternized chitosan-modified zeolite for long-lasting operation of constructed wetland: A bifunctional strategy for simultaneous phosphorus removal and microbial clogging mitigation 1.00
Predictive modeling of membrane lifetime for sustainable management of full-scale membrane bioreactors 1.00
Dual-shielded antibacterial thin-film composite membrane unifying ROS-mediated biocidal action and thermodynamic anti-adhesion for sustainable cooling water treatment 1.00
Simultaneous recovery of fresh water and ammonia from produced water by membrane contactor coupled with membrane distillation 1.00
Probing selective pollutant removal in nanofiltration processes: Critical insights from separation factor and removal difference 0.88
Attached microalgae-simulated plants enhanced multiple-pollutant removal in a tidal flow constructed wetland: quantified efficiencies, pathways, and biological mechanisms 1.00
Far-UVC photolysis of chlorine to mitigate ultrafiltration membrane fouling: Unraveling the molecular transformation mechanism of natural organic matter 1.00
Functional group-directed electron shuttling by adsorbed humic acid exciting nontarget reactions and their enhancement non-radical oxidation in H2O2-based aquifer remediation 1.00
Micro-granular sludge driven by powder carrier in membrane bioreactor: highly-efficient N amp; P removal and membrane fouling alleviation 1.00
Calcium peroxide capping stabilizes organic carbon in anoxic sediments via mineral protection 1.00
Decoding the role of organic matter in groundwater Feammox processes: Insights from the Yangtze River paleochannel 1.00
Bimetallic catalyst with dual-reaction-center and oxygen vacancies for synergistically boosting peracetic acid activation and decontamination via 1O2 generation 0.78
Octopus-like biomass-based flocculant for broad-spectrum water purification 1.00
Highly efficient electrochemical oxidation of ammonium in strong acid via low-frequency sonication: The role of ammonium desolvation 1.00
Nanofiltration membranes with ion-induced swelling for elevated water permeance in water treatment 0.18
Rapid oxidation of gatifloxacin by ozone/sulfite process: Generation of reactive species and radical-mediated mechanisms 1.00
Insights into synergistic metabolism mechanisms of carbon, nitrogen and phosphorus in Tetrasphaera-dominated partial denitrifying phosphorus removal and anammox (PDPRA) process 1.00
Broad-spectrum insight into precise removal of immobilized hard acids for fluoride: DFT simulations, experiments, and QICAR analysis 1.00
Controlling electrode-potential distribution to enable oxidation stability of MXene-based CDI desalination cells 1.00
Bilayer crown ether-engineered nanofiltration membranes with dual Li+ transport channels for ultra-high Mg2+/Li+ separation from saline lake brines 1.00
Piezoelectric-driven hydrogen peroxide production and in-situ utilization for organic wastewater decontamination and synchronous disinfection: Efficacy, mechanisms and comprehensive assessments 1.00
Efficient mineralization of PFAS by electric energy from multicomponent coordination on cation–π systems in waters 1.00
Persulfate activation by biochar for trace organic contaminant removal from urban stormwater 0.14
Degradation of antibiotics and profiling of transformation products upon peracetic acid–mediated treatment of electrochlorinated groundwater in a flow–through reactor 0.70
Electrically tuning low-pressure membrane surface charge for highly efficient Cr(VI) removal from drinking water 1.00
Metal-organic framework material-derived Fe-Si micro-nuclei drive a robust anammox process via multiple pathways: “Shelter” provision, “barrier” reinforcement, and biological “inducer” modulation 1.00
In situ generation of Cu(III) synergized with crystalline amorphous strong interfacial interaction for autocatalytic degradation of LEV 1.00
Unveiling the density of active sites and spatial confinement mechanism of catalytic ozonation by Fe2O3-Al2O3 ceramic membranes for water purification 1.00
Quantifying the underestimated plant potential for phosphorus removal in constructed wetlands: Revealing the mediating mechanism of radial oxygen loss 1.00
High-performance catalytic ultrafiltration membrane for peroxymonosulfate activation: The utility of high-valence metal species and enhanced mass transfer 1.00
Ultra-fast detoxification pathways of anti-cancer drug (Gefitinib) via high-entropy engineering driving catalysis 1.00
OA-based photo-Fenton system generates oxidizing and reducing radicals for the simultaneous removal of 1-NA and Cr (VI) in surface waters 1.00
Investigation of nitro(so)- and chloro-disinfection byproduct formation mechanisms after UV/Cl2 and UV/H2O2 oxidation of 2-methylisoborneol in the presence of algal organic matter 1.00
Br radicals generated via bromate-free photoactivation may promote degradation of emerging contaminants in highly saline waters 0.86
Investigation and application of microscopic mechanism of sea ice crystallization in direct-contact freeze desalination method based on cold silicone oil 1.00
Concentrated solar as a spectrally matched photonic platform for chlorophenol contaminant abatement 1.00
Making waves: Overcoming toxicity and deactivation challenges in polymerization-based wastewater treatment 1.00
Pioneering application of endogenous denitrification in full-scale industrial wastewater treatment plants via in-situ retrofit 1.00
Balanced water transport and evaporation by directionally wettability-gradient assembled evaporator for cascaded anti-oil and desalination 0.75
Bacterial inactivation by dichloride radical in water: Molecular-level reaction kinetics and disinfection mechanism 1.00
Molecular-scale mechanism of extracellular protein over-flocculation for sewage sludge dewatering by polyacrylamide 1.00
Dissolved organic nitrogen and phosphorus derived from different cyanobacteria regulate distinctly different nitrate reduction pathways in sediments 1.00
Alkaline UV/PAA synergistic degradation of iron-cyanide complexes: UV-driven ligand disruption and radical oxidation pathways 1.00
Virulence-mediated colonization mechanism for TEP as a promising watershed-scale recorder and source-tracking indicator of human pathogens 1.00
Role of multivalent iron in enhancing sodium percarbonate oxidation for alleviating membrane distillation fouling caused by shale gas produced water 1.00
Beyond charge neutralization: Self-skeletization of inorganic coagulants reinforces pore networks for enhanced sludge dewatering 1.00
The combination of ozone and Mn(II) for efficient removal of ozone-resistant N, N-diethyl-3-toluamide 0.83
Accelerating iron redox cycling via acetate modification: a ligand engineering for sustainable fenton-like oxidation 0.92
Singlet oxygen treatment of algae-laden water: An elegant way of decontamination without cellular damage 1.00
Efficient organic removal from hypersaline reverse osmosis concentrates through a hybrid microbubble ozonation-coagulation process: A two-stage removal procedure caused by two-sided effect of salinity 1.00
A novel dynamic membrane-equipped element sulfur-based denitrification reactor for efficient and easily maintainable treatment of high-nitrate wastewater 1.00
Synergistic oxidation-adsorption of As(III) via Zr/Fe prussian blue analogs composite membranes activated by peroxymonosulfate for sustainable water remediation 0.92
Sustainable high-flux ceramic membrane operations for seawater pretreatment under diverse algal bloom intensities 0.10
Salinity-driven trade-offs between nitrogen removal and microbiome dynamics in Fe-C-CWs toward saline aquaculture tailwater management 1.00
Unveiling the effect of Fe(III) and sulfate on ammonium oxidation under anaerobic condition: interactions and extracellular electron transfer 1.00
Beyond mass transfer: Bubble-propelled Fenton catalysts for efficient benzohydroxamic acid degradation 1.00
Regulation of sub-Tg solid-state surface crosslinking of reactive polyarylene ether substrate into loose nanofiltration membranes for dyes desalination 1.00
Diatom-inspired hierarchical carbon catalysts advance sustainable water decontamination via electron transfer-driven peroxide activation 0.77
Freestanding cylindrical metal-nylon mesh electrochemical modules for flexible and scalable water softening treatment 1.00
Optimal low-frequency mechanical vibration enhances extracellular polymeric substances-mediated phosphorus removal in biological systems 1.00
Unraveling the co-catalytic mechanism in Fenton-like reaction with diatomic Fe/Mo catalysts: Accelerating the Fe(Ⅱ)/Fe(Ⅲ) conversion and PAA efficient activation 1.00
Efficient and low-cost removal of dissolved organic phosphorus by visible light-enhanced Ti electrocoagulation with self-generated rutile photocatalysts 1.00
Partially water-level-fluctuating strategy enhances rural greywater treatment in vertical flow constructed wetlands 1.00
Multiscale mechanistic study of ammonia-driven chlorine speciation and control of bacteria and fungal spores in mixed chlorine/chloramines systems 1.00
Mitigation of combined fouling by gypsum and humic acid in membrane distillation via synergistic foulant capture mechanism 1.00
Polyelectrolyte membranes for selective nutrient recovery from PFAS-contaminated wastewater in forward osmosis 0.06
Nanoconfinement-Enhanced Lanthanum-Biochar Composites for Simultaneous Adsorption and Catalytic Hydrolysis of Organic Phosphorus Pollutants 1.00
Boosting Carbonate Radicals Production to Enhance Photocatalytic Degradation of Micropollutants 1.00
Polymeric Membrane Concentration of Lithium-Magnesium Solution for Sustainable Resource Recovery with Machine Learning 1.00
Unlocking Amorphous Metal Alloy Induced Electronic Metal-Support Interactions for Efficient Electro-Oxidation of Levofloxacin 1.00
Comparation of direct oxidative transfer process (DOTP) with Fenton and ozonation processes for water treatment 1.00
Insights to photo-excitated H2O2 activation in heterogeneous aerogel with asymmetric defect-engineering for PPCPs mineralization 1.00
Ion Exchange-Based Magnetic Micro-Cleaners Harness Multiple Effects to Enhance Antibiotics Removal 1.00
Knowledge Discovery and Performance-Energy Optimization in Heterogeneous Catalytic Ozonation via Adaptive Multi-Task Learning 1.00
Calcium-Loaded Activated Carbon Microtubes as a Structural Framework of Aerobic Granules: Crosslinking Networks Overcome Native Framework Limitations 1.00
Multi-omics evidence supporting the role of Halomonas enrichment contribution to high-salinity denitrification 1.00
Surface water evaporators mimicking river transport: bridging water-energy conflict for crystallization-free hypersaline desalination 1.00
Batch-Modified Janus Membranes via In-Membrane-Module Interfacial Polymerization for Robust Membrane Stripping of Ammonia from Coking Wastewater 1.00
Genome-resolved metagenomic analysis reveals a novel denitrifier with truncated nitrite reduction pathway from the genus SC-I-84 1.00
All-in-one self-cleaning lignin-derived spherical solar evaporator for continuous desalination and synergic water purification 1.00
Coupling Electrooxidation-Coagulation with Membrane Distillation Using Recycled Al Can Cathodes for Sustainable Landfill Leachate Treatment: Fouling Control and Mechanism Insights 0.83
High-entropy perovskite embedded in carbon-based catalyst toward peroxymonosulfate activation to degrade Rhodamine B: Performance and mechanism insights 1.00
Construction of stable niches for denitrifiers using 3D bioprinting for efficient nitrogen removal 1.00
Targeted stepwise pre-adsorption for enhanced nanofiltration removal of dissolved organic pollutants in petrochemical wastewater 1.00
Synergistic volatiles removal via diffusion inhibition and catalysis degradation by photothermal-photocatalytic hydrogel distillation membranes for sustainable water purification 1.00
Significantly improved antibiotics removal and material utilization in novel electrodialysis integrated with nanostructured carbon microspheres 0.63
Endogenous Denitrification Using SBOM as a Carbon Source: An In-Depth Investigation of the Rate and Driving Forces 1.00
Making waves: Does the polyvalent iron cycle truly exist in constructed wetlands during wastewater treatment? 1.00
Ultra-rapid start-up biological nitrification for nutrient recovery from source-separated urine 0.82
Overlooked secondary toxicity of culinary solvothermal transformation products of pesticides 1.00
Removal of Nickel-Citrate by KOH-Modified Arundo donax L. Biochar: Critical Role of Persistent Free Radicals 1.00
Breaking the trade-off between lithium purity and lithium recovery: A comprehensive mathematical modeling based on membrane structure-property-performance relationships 0.17
Effects of co-metabolic carbon sources on the formation of Algal-Bacterial Granular Sludge and pollutant degradation under quinoline stress: sludge characteristics, degradation pathways, and molecular mechanisms 1.00
A Novel Bio-LOHAS Process: Regulating DGAOs-DPAOs Interactions and Carbon Allocation through Strategic Low-DO Aeration for Low C/N Wastewater Treatment 1.00
Identification, sources and accumulation behavior of priority odorants discharged to surface water from stormwater systems with illicit connections 0.71
Enhancing selectivity of nanofiltration membranes for mineral ions and per- and polyfluoroalkyl substances via dual-component-assisted interfacial polymerization 1.00
In situ-generated palladium nanoparticles promoted co-reduction of bromate and nitrate in hydrogenotrophic biofilms 1.00
Molecular Insights in Outstanding Performance of Ca2+ bridging MXene/Sodium Alginate Composite Membranes 1.00
Solar evaporation-driven integrated system for saline soil remediation, freshwater recovery, salt resource harvest, and agricultural irrigation 1.00
The Overlooked Multidimensional Roles of Filtration Pressure in Improving Ozonation: A Study in a O3/Pressurized Cell-Side Feeding PVDF UF/BAC System 1.00
Magnetic Fe/S-modified porous carbon activates peracetic acid for emerging contaminant removal: unveiling active sites and structure-activity relationships 0.75
Marine Quorum Quenching Consortium for Biofouling Control in Membrane Bioreactor under Salinity Stress 0.93
Biomineralization-Driven Simultaneous Carbon/Phosphorus Recovery and Membrane Fouling Control in Anaerobic Membrane Bioreactor for Swine Wastewater Treatment 0.91
Ball-milling treated superfine powdered activated carbon triggers Mn(VII) activation for enhanced oxidation of organic contaminants 1.00
Clostridium perfringens as an alternative fecal indicator bacteria in surface water quality: a national investigation in Chinese rivers 1.00
Structural and mechanistic insights into halogenated disinfection byproducts of tannic acid with toxicity analysis during chloramination 0.83
Reactive Bromine Species-Mediated Desulfonation and Bromination of the Ultraviolet Filter 2-Phenylbenzimidazole-5-Sulfonic Acid during Seawater Chlorination 1.00
Synergistic Fouling Mitigation of Co-contaminants of Ultrafine Microplastics and Organics in Seawater Pretreatment Using Ferrous Iron/Peracetic Acid 0.70
Insights into freshwater lake abiotic and biotic carrier biofilm nitrogen transformation and N₂O emission patterns: A 15N isotope tracing study 0.83
Inclined Multilayer Solar Evaporator for Directional and Refined Salt Crystallization from Practical Industrial Wastewater 1.00
Polarity-based fractionation and identification of high-toxicity disinfection by-product precursors in drinking water 1.00
Ultrafiltration membrane fouling mitigation mechanism induced by algal and natural organic matters: Dependence of photocatalysis pre-oxidation degree and membrane properties 1.00
Carrier-based granules vs aerobic granular sludge 1.00
Mechanistic Insight into the Selective Singlet Oxygen Production at Cathode via the Activation of Anodic Water Splitting-generated Oxygen Bubbles 1.00
Effect of far UVC pretreated dissolved organic matter on volatile disinfection byproducts abatement in real surface water disinfection process: Implications from non-targeted high-resolution mass spectrometry and interpretable machine learning 1.00
Role of temperature on the cytotoxicity of drinking water upon chlorination in the presence of CuO 1.00
Differential decay mechanisms of human-associated Bacteroidales and bacteriophage genetic markers in aquatic environments: Impacts of indigenous microorganisms on DNA stability and fecal pollution assessment 1.00
Closed-loop chromium recovery from tannery wastewater: Mechanism of multiphase Cr(III) electrode position under low-concentration sulfate and chloride coordination 1.00
Fast and highly selective proton transport through Ca2+-regularized laminar membrane for spontaneous acid recovery and energy generation 1.00
Multi-Dimensional Fouling Process Analysis and Anti-Fouling Strategies for Catalytic Membranes in Long-Term Water Treatment 1.00
In situ electrocatalytic nitrate-to-nitrite conversion-driven anammox in MBRs for extremely efficient ammonium-containing wastewater treatment 1.00
Comparative Formation of Nitrogenous By-products in Hydroxylamine-Enhanced Fe(II)/PDS and Fe(II)/H2O2 Systems During Contaminant Degradation 1.00
Scalable, Flexible and Hydrophilic Porous Membrane with Single-Layered rGO-W18O49 Nanoplates Dispersion for High-Efficiency Solar Water Evaporation 1.00
Efficient antibiotic tetracycline degradation and toxicity abatement via the perovskite-type CaFexNi1-xO3 assisted heterogeneous electro-Fenton system 0.90
Porous Ca-doped Al2O3 with abundant basic sites for enhanced hydrolysis of fermentative antibiotics 1.00
Predicting and understanding the performance of polyamide nanofiltration membrane for Li/Mg selective separation based on machine learning 1.00
Unveiling the Neglected Role of Alcohols and Phenolic Compounds in Photocatalysis H2O2 Generation Chemistry 0.88
Bio-promoter-driven conversion of 4-chlorophenol into utilizable carbon source: Enhancing electron supply-consume and attenuating bio-toxicity 1.00
Suspended solids dominated tailing effect in UV disinfection of livestock wastewater: Mechanistic deciphering and modelling prediction for epidemic control 0.80
The Internal and External Reverse-Reduction Pathway Involved in the Degradation of Free DNA Bases during Advanced Oxidation Processes 1.00
Piezo-photocatalytic-Fenton-like ternary coupling system for enhanced resourceful conversion of organic pollutants 1.00
Beyond activated carbon properties and hydrophobicity: Data-driven assessment of organic micro-pollutant treatability and mechanistic insights 0.67
Ultrafast hypersaline wastewater decontamination via salinity-mediated surface redox with ultralow H2O2 1.00
Reduced Cytochrome c: Exploring Its Promoting Function in Synergistic Denitrification by Pseudomonas sp. JM-7 and Thiobacillus denitrificans 0.83
Exploration of low-dose ozone-activated periodate (O₃/IO₄⁻) for rapid degradation of the β-Blocker pindolol: efficiency and radical mechanism 1.00
Nonradical-dominated nanoconfined iron single-atom catalytic membrane to enhance peroxymonosulfate activation for efficient water decontamination 1.00
Nature-Inspired Water Purification: Integrating Riverbank Filtration and Biofilm-Regulating Nanofiltration 0.88
Overlooked Influence of Phosphate on the Performance of a Dual Membrane Process with Coagulation Pretreatment 0.86
In-situ recycling of waste ozonation catalysts into N-doped graphitic carbon-alumina structures induces a non-radical pathway towards water purification 1.00
Breaking through the bottleneck of nitrogen pollution control in micropolluted water sources: Enhancement of aerobic denitrification efficacy driven by microbial community enrichment and its sustainable application 1.00
Unraveling the role of funnel effect vs. gutter effect in water permeance and antifouling performance of polyamide nanofiltration membranes 0.92
Selective Oxidation of Phosphonates to Phosphates via Direct Photolytic Cleavage of C–P Bonds on BiOCl Driven by Interfacial Complexation 0.86
Characterization of phthalate esters (PAEs) in urban water supply system: PAE-degrading bacteria existed in the pipeline biofilm 1.00
Magnetite-Augmented Sulfur-Siderite Autotrophic Denitrification: Deep Nitrogen Removal at Ultra-Low HRT from Lab to Pilot Scale 0.88
Integrating thermal vibration and local surface plasmon resonance effect boosted "Symbiotic Co-evolution" for efficient solar evaporation, antimicrobial and antibiotic resistance genes removal 1.00
Combining Ozonation and Powdered Activated Carbon Adsorption for Organic Micropollutants Removal in Municipal Wastewater Treatment Plants: Single versus Two-Reactor Systems 0.33
Formation of membrane fouling and removal mechanism of contaminants in osmotic microbial fuel cells in the presence of perfluoroalkyl substances 1.00
Spatiotemporal hotspots of potential microbial risk in shower systems 0.74
Chlorination-Properties-Performance of Polyamide Nanofiltration Membranes for the Rejection of Emerging Contaminants 1.00
Machine Learning-Based Optimization of Enhanced Nitrogen Removal in a Full-Scale Urban Wastewater Treatment Plant with Ecological Combination Ponds 1.00
Selective polymerization of chlorophenols in hypersaline wastewater via surface-complex-mediated electron transfer over Ce-doped CuO 0.89
Electron beam/persulfate-induced second-scale upcycling of wastewater polyvinyl alcohol with ultra-low chemical input 1.00
Formation of highly toxic halogenated coupling byproducts in UV/Chlorine reaction of phenols in presence of halides 1.00
Round-the-clock degradation of pharmaceutical pollutants by photocatalytic and catalytic ozonation based on bifunctional MIL-100(Fe) catalyst 1.00
Far UVC Photolysis of PDS and H2O2 in Saline Water Generates Disinfection By-products 1.00
Efficient Conversion of Municipal Sludge to Practical Carbon Source via N/MxOy in Catalytic Wet Air Oxidation 1.00
Enhanced Removal of Organic Micropollutants Using 2D Metal-Organic Framework Interlayered Nanofiltration Membrane 1.00
Advanced fluidized bed-ultrafiltration-reverse osmosis process for near-complete fluorine recovery from photovoltaic fluoride-laden wastewater: system parameters and mechanisms 1.00
Two-Dimensional Prussian Blue Analog-Based Catalytic Membrane for Effective Decontamination of Micropollutants 1.00
Study on the self-diffusion coefficients of binary mixtures of supercritical water and H2, CO, CO2, CH4 confined in carbon nanotubes 1.00
A Coupled Capacitive Desalination (C-CDI) for Enhanced Desalination Performance at Ultralow Voltage 1.00
Machine learning-guided prediction of chlorinated/chloraminated disinfection by-product formation in drinking water treatment 1.00
Degradation of Malathion to Low-Toxicity Products via Peroxymonosulfate Activated by Plastic/K2FeO4-Derived Porous Carbon 1.00
Manipulating Electrochemical Phosphate Recovery from Acidic Wastewater for Synthesizing LiFePO4/C Cathode Material 1.00
An intelligent system for precise management of coagulants in sludge conditioning: Inspired by the exploratory behavior in primates using senses 1.00
Development of nitrification and elemental sulfur-based denitrification/anammox (NS0DA) process for mainstream nitrogen removal 0.75
Bioengineered Iron-Based Heterojunction Orientation in Optimizing Activation Pathways for Superoxide Radical-Mediated Photoreduction of Cr(VI) from water 1.00
Efficient Permanganate Activation under UV 222 nm Irradiation for Enhanced Pollutant Abatement 1.00
Exploring the ecological niche of comammox Nitrospira by in-situ enrichment within mainstream nitrification systems 1.00
Machine learning-optimized advanced oxidation for enhanced sludge dewatering: EPS mechanistic insights and predictive modeling 1.00
Nitrite impairs bioreactor performance due to decreased replication of Candidatus Brocadia sapporoensis by unbalanced energy allocation 0.92
Coexisting Anilines Accelerate the Oxidation of Phenolics by Manganese Oxides 1.00
Does resource recovery and utilization improve environmental and economic performance of rural wastewater treatment plants? A case study in Xiamen, China 1.00
Decreased bromate formation but inadvertently increased toxicity in the chloramination-ozonation process: Essential roles of halamines in generating halogenated and nitrogenous byproducts 1.00
Low ultraviolet dose with high efficiency: Synergistic coupling of far-UVC and ferrate(VI) for ultrafast and selective degradation of micropollutants 1.00
Organic molecular network analysis reveals transformation signatures of dissolved organic matter during anaerobic digestion process 1.00
Oxygen Vacancies-Mediated the Peracetic Acid Activation to Selectively Generate 1O2 for Water Decontamination 1.00
Superfast Water Transport Mixed Matrix Membranes with Asymmetrical Micro-Nanostructures Reinforced by Metal–Organic Frameworks 1.00
Selective removal of organic matters from high-salinity chemical industrial wastewater: Ultrafiltration or nanofiltration? 1.00
Fluorine recovery from low-concentration fluorine wastewater by flow-electrode capacitive deionization and fluid bed crystallization (FCDI-FBC): preconcentration and high-quality fluorite pellets formation 1.00

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.