Mechanical Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 1225

Article ‘Count’ for Mechanical Engineering.

Journal Count Share
38 36.13
Semiconductive MOF-Based Supercapacitor Diodes 1.00
In Situ Microenvironment Engineering Enables Synergistic Suppression of Protons and Chloride for Durable Seawater Oxidation 0.83
Hetero-Chalcogen Chemistry Enables Reversible Six-Electron Redox for an Energetic Tellurium Aqueous Battery 1.00
Liquid Metal-Induced Self-Healing Interface and 3D Porous Configuration Enable a High-Performance Si/Carbon Anode for Lithium-Ion Storage 1.00
Nanoconfined Water Manipulated Selective Proton Storage in Layered Tungsten Oxides for Versatile Supercapacitor Diodes 1.00
Gradient Entropy Surface Architecture Stabilizes LiCoO2 to 4.7 V 1.00
Enabling Ultrahigh-Power-Density LiMn0.6Fe0.4PO4 Cathodes via Kinetics Limitation Breakthrough and Jahn–Teller Distortion Mitigation 1.00
Quantifying the Dynamic and Additives-Dependent Interface Evolution by Operando Neutron Reflectometry 1.00
Lamellar Composites of Vertical Graphene and Phase-Change Materials for Highly Efficient Heat Dissipation 1.00
Spatiotemporal Visualization of Nanoscale Rotational Dynamics by Movie-Mode Transmission Electron Microscopy 1.00
Simultaneous Optimization of Internal Electric Fields and High-Valence Cations in Cathode Coating Microstructures 1.00
Ultralow and Twist-Tolerant Thermal Conductivity in Two-Dimensional Pentagonal Covalent Organic Frameworks 1.00
Giant Electrostrain in Lead-Free BiFeO3–BaTiO3 Ceramics via High-Entropy Design 1.00
Local Polymorphic Nanoclusters Enhanced Capacitive Energy Storage in Lead-Free Superparaelectrics 1.00
Broad-Temperature Electrocaloric Effect in Multilayered Ferroelectric Polymer Nanocomposites 1.00
High-Performance Quasi-Solid Thermogalvanic Cells via Crown-Ether-Mediated Ion Migration 1.00
Enhancing Anionic Redox Reversibility and Structural Stability of Li-Rich Mn-Based Cathodes via Tuning Band Structure by Sn Doping 1.00
Identifying the Relaxative Internal Friction Behavior of Mn2+/Mn3+ Redox in Na4Fe1.5Mn1.5(PO4)2(P2O7) Cathode for Sodium-Ion Batteries 1.00
Pinning Effect Suppresses Leaching in High-Entropy Amorphous Alloys for Efficient Selective Electrocatalysis in Alkaline Seawater 1.00
Promoting Anderson Localization for Low-Frequency Phonons in SiGe Alloyed Nanowires with Long-Range Correlated Disorder 0.58
Reduced Bond Covalency and Anisotropic Lattice Distortion Enable High Fe–Mn Redox Activation in a Mixed-Polyanionic Cathode 1.00
In Situ Transmission Electron Microscopy Visualization of Crystallographic Reversibility in 2D Bismuthene Anodes Enabling Ultrastable Potassium-Ion Battery Cycling 1.00
Integration of Interfacial Chemistry-Guided BaTiO3 Nanoparticle Arrangements in Polymer Film Stacks for Pressure-Sensing Devices 1.00
Thiol–Amine Complexes for the Synthesis and Surface Engineering of SnTe Nanomaterials toward High Thermoelectric Performance 0.63
Nanoengineering of Li2MnO3 Domain Stabilizes Li-Rich Layered Oxides 1.00
Atomic-Scale Defect Reconfiguration via Thermally Induced Structural Ordering for High-Efficiency Sb2Se3 Solar Cells 1.00
Thickness-Dependent Low Lattice Thermal Conductivity of Chemical Vapor-Deposited SnSe2 Nanosheets 1.00
Understanding the Lithium Storage Mechanism of Mesoporous Structured High-Entropy Metal Oxide Anode with In Situ Transmission Electron Microscope 1.00
Dual-Phase Engineered Iron-Based Polyanion Cathodes for Fast and Durable Sodium-Ion Batteries 1.00
Frictional Dissipation and Scaling Laws at van der Waals Interfaces: The Role of Edge and Corner Elastic Moiré Pinning 0.67
Highly Ductile N-Type Thermoelectric MOF-Based Foams 1.00
Tuning Diffusion Preferences in Silicon-Based Anodes for Enhanced Rapid and Homogeneous Lithiation 0.71
In Situ Adsorption of a Lewis Base Triggers Selective Seawater Oxidation Based on the Lattice Oxygen-Mediated Mechanism 1.00
Solubility-Difference-Driven Strategy for Constructing Core–Shell Structure Si@C Anodes: Ammonia-Assisted Carbon Shell Embedded with Copper Nanoparticles 1.00
Dual-Scale Polarization Engineering of scpd/scp-Phenylalanine-Based Assemblies for High-Performance Nanogenerators 1.00
Achieving High-Yield Conversion of Janus Transition Metal Dichalcogenides on Diverse Substrates 0.71
Silicon Heterojunction Solar Cells with Nanocrystalline Silicon Oxide Emitter for Achieving High Fill Factor 1.00
Morphology-Controllable Liquid Metal/Diamond Sandwich-Structured Thermal Interface Material toward High-Efficiency Thermal Management 1.00
2 1.82
Bio-piezoelectric β-glycine/gelatin composite films fabricated via synergistic molecular self-assembly and thermally assisted evaporation-induced crystallization 1.00
Anisotropic nanorod-integrated magneto-mechano-electric cascade system for neural electrical stimulation 0.82
161 151.46
Dynamic Hydrogen‐Bond Networks Enable Long‐Lived Ionic Thermoelectric Materials With High Power Density 0.88
Super Durable Triboelectric Coating With Enhanced Output Based on Fluorine and Nitrogen Codoped Diamond‐Like Carbon for Intelligent Lubricant Condition Monitoring 0.25
Unlocking Multi-Valley Energy Pockets and Interface-Induced Phonon Filtering in InSb Thermoelectrics by Reaction-Driven Interface Engineering 0.64
Enabling 748.6 mV Open‐Circuit Voltage in Industrial Bifacial Tunnel Oxide Passivating Contact Solar Cells With Multi‐Layer Polysilicon and Tailored Silver Paste 1.00
In Situ Self-Healing Triggered by Reversible Dynamic Hydrogen Bonds for Near-Zero Wear of MXene Supramolecular Films 1.00
Organic Semiconductor Composited Self‐Lubricating Coating for In Situ Self‐Sensing Tribovoltaic Sliding Bearings 1.00
Controlled Oxidation of MXene for Regulating Tribochemistry at Sliding Interfaces 0.93
Advanced Sub-Micron Pyramid Texture Enables Approximately 32% Efficiency in Perovskite/Silicon Tandem Solar Cells 1.00
Entropy-Regulated LiMnxFe1-xPO4 Cathode for Superior High-Temperature Cycling 1.00
Spontaneous Formation of Conductive Solid Electrolyte Interphase on Porous Si@C@ZIF Anodes for Highly Stable Lithium-Ion Batteries 0.43
Electron Donor‐Acceptor Systems With Black Phosphorus and Tellurium for High‐Performance Interfacial Lithium Diffusion and Storage 1.00
Freestanding Relaxor Ferroelectric Single-Crystalline Thin Films Enable Flexible Piezoelectric Energy Harvester With Giant Power Density 0.88
Integrated Design of Nickel-Based Coordination Compound Size Control and 3D Printing to Construct Ordered Micro-Supercapacitors 1.00
Chloride-Tolerant Iridium Single-Atom Modulated Nickel Hydroxide for Industrial-Current-Density Seawater Electrolysis 0.73
Multiscale Layered/Rocksalt Intergrown to Stabilize Surface and Local Micro‐Structure for Ultrastable Li‐Rich Oxide Cathodes 1.00
Combining Weakly Hydrogen-Bonded Electrolyte with Vertical Ion Channels Enables Low-Temperature AC-Line Filtering Electrochemical Capacitors 1.00
Improving Stability of High-Performance AgSbTe2 Thermoelectrics by Lattice Regulation 1.00
Highly Efficient Cadmium-Free Kesterite Solar Cell With the Lowest VOC,def Enabled by Na-Ion-Assisted Defect Passivation 0.75
Flexible Polycrystalline Ferroelectric Oxide Films With Ultrahigh Photovoltaic Current 1.00
Performance Robustness Navigates the Development of Natural Mineral‐Based Thermoelectrics 1.00
Interface-Anchored Cu-COF Frameworks Mitigate Volume Expansion and Accelerate Li+ Transport in Silicon Anodes 1.00
Improved Formation of Polar Phase in P(VDF-TrFE) Through Adding Piezoelectric Metal Halide TMCM-CdBrCl2 1.00
Revealing the Hidden Role of Cd in p-Type Mg3Sb2: Enhanced Thermoelectric Performance by Grain Boundary Segregation Engineering 0.85
Operando Monitoring of Stress Evolution in LiMnxFe1-xPO4 Cathodes: Deciphering the Origin of Abnormal Discharge Plateau 1.00
Sodium α-Olefin Sulfonate Interface Modification for High-Performance Sb2S3 Solar Cells 1.00
Crystallochemical Tailoring of Ternary Sb2TeSe2 Anodes Enables Fast and Durable Sodium-Ion Storage 1.00
Dual-Interfacial Engineering of PEDOT:PSS/Narrow-Bandgap Semiconductor Nanowire Composite Fibers for High-Performance Thermoelectric Applications 1.00
DFT-Informed Electrochemical Engineering of Nanoalloy Intermediates for Ultra-Stable Lithium Storage 1.00
Upcycling Spent LiFePO4 Toward Pseudo-Solid-Solution LiFePO4@Li3V2(PO4)3 With Great High-Voltage Stability and Rate Properties 1.00
Nanoscale Local Symmetry Optimization Induced Low Lattice Thermal Conductivity in I-V-VI2 Compounds 1.00
Engineering Compact Solvation Structure of Nonflammable Electrolyte via an Asymmetric Fluorinated Ether to Enable Stable High‐Voltage Lithium‐Ion Batteries With Micron‐Sized Silicon Anodes 1.00
Piezoelectric-Field Coupling Strategy for Regulating Interfacial Charge Transfer Toward High-Performance Rechargeable Zn–Air Batteries 1.00
Integrated Physical Vapor Deposition and Vapor Reaction Approach Advances High-Performance Flexible Ag2Te Thin-Film Thermoelectrics 0.08
Constructing Ionic Fast Diffusion Channels on LiNi0.5Mn1.5O4 for Lithium-Ion Batteries 0.05
Modulating Thermally Activated Multiexcitonic De-Trapping in Zero-Dimensional Tin-Halide Perovskites for Deep-Learning-Assisted Temperature Mapping 1.00
Chemical Bond Covalency-Driven Cubic Phase Stabilization Boosts Thermoelectric Efficiency in Cu2GeSe3 1.00
Orbital Engineering via D-p Hybridization by in Doping Enables High-Performance Lithium Manganese Iron Phosphate Cathodes 1.00
In Situ Amidation‐Derived Interfacial Modulation for Homogeneous Ultra‐High Nanoparticle Loading Toward Robust and Flexible Piezoelectric Composites 0.05
Polyhedral‐Oligomeric‐Silsesquioxane‐Based Binders Enable High‐Temperature Proton Exchange Membrane Fuel Cells with High Performance and Durability 1.00
Dual-Component Multilayer Piezoelectric Ceramics with a Central Through-Hole Interdigitated Architecture for Structural-Functional Coupling and High-Performance Accelerometers 1.00
A Vapor Pressure‐Mediated Annealing Strategy for Vertically Oriented Trigonal Selenium Films Enabling Efficient Solar Cells 1.00
Bridging the Energy‐Filtering Gap in Filtering Lithium‐Ion Capacitors with Covalent Organic Framework Nanofilms 1.00
Surface-Energy-Matched Interfaces as Key Design Rule for Ultra-Low-Resistance Thermal Interface Materials 1.00
Design Charged Edge Dislocations Toward High Performance Thermoelectrics 1.00
Phase-Change Induced Capacitive Response in Lubricating Nanocapsules for In Situ Monitoring of Tribological Interface Temperature 1.00
Harnessing Phase-Transition Hysteresis for Enhanced Thermoelectric Performance of Ductile Ag2(S, Se, Te) 1.00
Regulating Reversibility of Anion Redox and Electronic Structure via Controlled Surface Oxygen Vacancies in Lithium‐Rich Layered Oxides 1.00
Superior Capacitive Energy Storage in Relaxor Ferroelectric Perovskites Engineered by Atomic-Scale Lattice Distortion and Strain 1.00
Engineering Controllable Coordination Shells of Axial Single Atoms for Tuning Oxygen Reduction Reaction in Alkaline Seawater Electrolytes 1.00
Gradient Multi‐Barrier Architecture Enabling High‐Performance Silicon‐Carbon Anodes 1.00
Phase-Segregation Engineering of Binary Metal Selenide Heterojunctions on 3D N-Doped Carbon Cubes: Boosting Carrier Transport via Electron-Rich Field for High-Performance Photovoltaics 1.00
Anion-Adsorption Mediated Facet Engineering and Surface Phase Regulation for Boosting Kinetics of Li-Rich Layered Oxides 1.00
Recyclable CdS/PVDF Composite Films for Enhanced Photocatalytic Hydrogen Production: Water Flow Drives Piezo-Photocatalysis 1.00
Ultralong-Cycling-Life Sodium Metal Capacitors Enabled by Hetero-Salt Additive Strategy with NaF/LiF Hybrid Solid Electrolyte Interphase 1.00
Progressive Optimization of ZT Value in n-Type PbSnS2 Polycrystals via Heterovalent Doping and Crystal Structure Modification 1.00
Revealing Carbon Intermediate Structure and Functions for Carbon‐Coated Silicon Anodes 1.00
Curvature-Activated Graphite Scaffolds Guide Charge Migration and Stress Distribution in Silicon Anodes 1.00
Interfacial Architecture Design for Efficient Carrier‐Phonon Decoupling in n‐Type GeSe 0.55
Defect-Mediated Compliance in Plasma-Sprayed Fe─Mn Barriers Enables Durable and Efficient Bi2Te3 Modules 1.00
Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices 0.93
Boosting Long-Life Sodium Storage of Na4MnV(PO4)3 via Synergistic Bond Structure Regulation and Interfacial Modification 1.00
Polymorph with Triphase Heterojunctions Enhancing Interfacial Stability for Long‐Lasting Quasi‐Solid‐State Lithium Metal Batteries 1.00
Hole-Doping Driven Electronic Structure Reconstruction Enables Dual-Site Synergistic Regulation and Energy Barrier Balancing in NiFe2O4 for Efficient Seawater Oxygen Evolution 1.00
s-Orbital Mediated Metavalent Bonding Enables State-Of-The-Art n-Type AgBiSe2 Thermoelectrics 0.71
Enhancement of Thermoelectric Performance in Mg3(Sb, Bi)2 via Dual Doping of Cations and Anions 1.00
Methylene Blue with Rotatable Bonds Driven Self-Assembly of Cellulosic Biomass Synthesis of Bifunctional N/O/S-Rich Carbon Foams for Dye Adsorption and Supercapacitors 1.00
Electronic Structure of Graphite Dictates Interfacial Stability in Propylene Carbonate Electrolytes Beyond SEI Formation 1.00
Ultralow Lattice Thermal Conductivity Induced by Unique Hierarchical Rotational Dynamics in Lightweight Cyanide-Bridged Framework Materials 1.00
Constructing Highly Conductive Porous/Honeycomb Networks on Core–Shell Nanoarrays for Flexible Asymmetric Supercapacitors with Superior Performance 1.00
Giant Anomalous Hall Conductivity in a Topological Nodal-Chain L12-Fe3Ga: Intrinsic and Extrinsic Origins 1.00
Freezing‐Induced Phase Separation and Conformational Inheritance of Macromolecules in Polyacrylonitrile Solution toward Advanced Porous Electrode Materials 1.00
Enhanced Near‐Room‐Temperature Thermoelectric Properties of n‐Type PbSe and Cooling Device via Modulation Doping 1.00
A “PHASE” Strategy for Preparing Flexible Piezoelectric Polylactic Acid Double Network Hydrogel Sensors 1.00
Iron‐Cobalt Co‐Doped Nickel Sulfides: A Robust Electrocatalyst for High‐Current‐Density Seawater Splitting 0.42
Macroscale Superlubricity on High-Roughness Engineering Steel Surface Through Wear Debris-Converted Tribofilm and Carbon Nanotubes 1.00
Ultrastable Ni─Fe─P-Based Heterostructures for Seawater Electrolysis 1.00
Reconstructing Short‐Hydrogen‐Bond Network via Hexametaphosphate Boosts Chloride‐Ion Shielding Effect Enhancement in Seawater Electrolysis 1.00
Interlayer Electron Redistribution Engineering for Ultralow Friction in 2D Electrides 0.47
Upcycling Spent LiFePO4: Precisely Fe-Sites Doped by Ti-Atoms with Expanded Li-Diffusion Channels Toward High Capacity 1.00
Bacillus Cereus-Derived Hollow Carbon Rods/Oxygen-Vacancy-Rich Co3O4-x Nanosheets by Biomineralization Strategy for Boosting Lead Ions Capture 1.00
Interfacial Engineering Enables Over 23.8% Efficiency Crystalline Silicon/Transition Metal Oxide Heterojunction Solar Cells 1.00
Reconstructing Interfacial H-Bond Networks via Surface Lewis-Base Silicate Species for Durable Seawater Oxidation 1.00
A Flexible, Efficient, and Fully Lead‐Free Piezoelectric Ultrasound Wireless Energy Transfer System 1.00
Structure and Interface Stabilization Enabled High‐Performance O3‐Type Layered Sodium Cathode 1.00
Enhancing Sensitivity of Flexible Piezoelectric Thin‐Film Acoustic Sensors via Buffer Layer Engineering for Insulation Health Monitoring of Power Cables 1.00
Unveiling the Degradation Mechanisms of MoS2 Lubricating Films in Authentic Low Earth Orbit via China Space Station Exposure Experiment 1.00
In Situ Encapsulation of Nano-Si Anodes with In2O3/C Derived From Indium-MOF for Sulfide-Based All-Solid-State Lithium Batteries with High Performance 1.00
Macroscale Superlubricity Composites with Self-Healing Functions 1.00
Breaking the Performance Bottleneck of Silicon Anodes with Ultrahigh Areal Capacity via Solid‐State Electrochemical Prelithiation 1.00
Construction of Core–Shell Structure Cobalt-Free Li-Rich Mn-Based Cathode Materials with Enhanced Electrochemical Performance 1.00
Regulating Cu─Se Bonds by Molybdenum Orbital Hybridization to Facilitate Kinetics of Cu2+ Transition for Advanced Aqueous Batteries 1.00
Porous MoS2/Co8FeS8 Heterojunction as Bifunctional Electrocatalyst for Energy-Saving Hydrogen Production Coupled With Sulfur Recovery 1.00
Boundary Engineering-Induced Strong Yet Ductile Bi2Te3 Thin Film with High Thermoelectric Performance 1.00
Exceptionally Large Thickness-Independent Longitudinal Strain in Lead-free Piezoceramics via Defect Dipole Engineering 1.00
Janus-Architected HEA-Mo2C Heterophase Catalysts with Self-Optimizing Interfaces for Efficient Alkaline Seawater Electrooxidation 1.00
Solvent–Mediated Cathode Prelithiation for Durable, High‐Energy Lithium‐Ion Batteries 1.00
Pulverization of Silicon Upon Lithiation: Problem or Opportunity? 1.00
Interface Engineering with Oxygen‐Doped Amorphous Silicon for Stabilizing Light Soaking Gains in Silicon Solar Cells 1.00
9% Certified Efficiency Record for Carbon-Based Sb2(S,Se)3 Solar Cells Enabled by Gradient-Oxidized Treatment of CdS Electron Transport Layer 0.96
High ZT >1.4 Realized in Bi2Se2S via Amorphous–Crystalline Coexistence Structure of Secondary Phase and Bilayer Rotation 1.00
Gradient Heterogeneous Coatings for Silicon‐Carbon Anodes in Lithium‐Ion Batteries 1.00
Deciphering Silver Diffusion Pathway and Local Structure of Thermoelectric Ag8SnSe6 0.67
Interfacial Engineering Tuning Enables MXene Electrodes in Silicon Heterojunction Solar Cells 1.00
Efficient Direct Regeneration of Spent LiFePO4 Cathodes via Molecular Fencing and Vapor Deposition 1.00
Ultrathin Lithium Foil Prelithiated Silicon Carbon Anode with the Formation of Li22Si5 Alloy Phase Enables High-Energy-Density Pouch Cells Lifespan over 900 Cycles 1.00
CuO@NiCoS NAs Heterostructure Boosting Anionic Ligand Defect Sites Enabled 2000 h Stable Seawater Electrolysis 1.00
Rhombohedral GeSe Thermoelectric Breakthrough by Strategic Pb Alloying 1.00
Hydrothermal‐Pyrolysis Vulcanization Microporous Anode Unleashing Low‐Potential Capacity to Remedy Voltage Window Loss in Sodium‐Ion Capacitors 1.00
Patterning Design for Edge Passivation in Compound Crystalline Silicon Solar Cells 1.00
Promoting p-Type PbS as Efficient Candidates for Thermoelectric Cooling and Power Generation 1.00
Unlocking Room-Temperature Thermoelectric and Flexibility in Freestanding Single-Crystalline SnSe Membrane through Metastable-Phase Engineering 1.00
High Piezoelectricity and Strong Field Endurance in Pb(Zr,Ti)O3-Rich Textured Ceramics 0.91
Realizing High Thermoelectric Performance in GeTe‐Based Alloys Without Lead Addition 1.00
Realizing High Performance in Commercial Bi0.5Sb1.5Te3 Thermoelectric Material via Balancing the Magnetic Doping and Interface Engineering 1.00
Highly Efficiency Seawater Electrolysis Guided by Coordinating Catalysis of Oxygen Evolution Reaction 0.89
Stratified Triphasic Thermocells with Boosted Thermopower Enabled by Entropy‐Concentration Dual Regulation Strategy 1.00
Sustainable Upcycling of Solar Silicon Waste Into Hierarchical Silicon‐Based Nanofibers Embedded With Quantum Dots for Ultra‐Stable Silicon Anodes 1.00
Multifunctional Tribovoltaic Coating for Self‐Powered In Situ Sensing with Exceptional Tribological Robustness and Charge Transport 1.00
Fluorine-Doped CdS Enables Oriented Growth and Defect Suppression in Sb2Se3 Solar Cells with High Conversion Efficiency 1.00
Probing the Origin of 2D Covalent Organic Frameworks with High Thermoelectric Performance Down to the Ångström Level 0.89
Thermal Stress Synergizes Oxygen Vacancies Alleviate Jahn–Teller Distortion in Lithium Manganate Cathode 1.00
Realization of Precise Human Gesture Recognition via a Self‐Powered Flexible Sensor Based on Thermal Expansion‐Treated and Potassium Ion‐Modified VMT/PDMS Film 1.00
Hierarchical MoS2-Oleogel in Porous Polyimides: A Self-Adaptive Confined Lubrication Strategy for Ultralow Friction and Wear 1.00
Constructing Anti-barrier Layers to Eliminate Grain Boundary Resistivity for Enhancing Thermoelectric Properties of Polycrystalline Mg3(Sb, Bi)2 1.00
Rational Design of Molybdenum Nitride Quantum Dot Engineered by Carbon Framework for Boosted Lithium‐Ion Thermal Charging Cells 1.00
Parabolic Graded Structure Enabling Low‐Field‐Driven Multistage Phase Transitions for Broad‐Temperature‐Range Electrocaloric Response 1.00
Phase Boundary Metallization Enables Electron-Phonon Transport Decoupling in PbS-Based Thermoelectric 1.00
VS4-Anchored Carbon Nanofiber Network with MXene Coating as Flexible and Self-Supported Electrode for Rapid and Durable Lithium Storage 1.00
Multi-Cation Synergy in MnO2-Based Cathodes: Electronic Engineering for Ultra-Stability and High-Capacity Charge Storage 1.00
Decoupling of Carrier-Phonon Transport in PbSe with Dumbbell-Like Occupied Cu+ by Referencing Hume–Rothery Rule 1.00
Ultrahigh Capacitive Energy Storage Through Phase and Entropy Engineering 1.00
Dynamic Variation in Electric Field and Ksup+/sup Diffusion: A New Insight from Multi‐Heterostructure Evolution for Bisub2/subSsub3/sub/WSsub2/sub Potassium Ion Anode 1.00
Nano-Micro Engineering Modulating High-Entropy Multilayer Ceramic Capacitor for High-Performance Energy Storage 1.00
Ultra‐Wideband Hybrid Triboelectric–Piezoelectric Acoustic Sensors Enabled by Acoustic Metasurface Lens for Environment Perception and Medical Imaging 1.00
Ultrahigh‐Frequency Flexible Triboelectric Ultrasound Transceiver Arrays for Inspection of Complex Surfaces 1.00
Cation/Anion Co-Doping and Multiphases Coexistence Lead to a High Average ZT Value in Earth-Abundant Cu1.8S-Based Thermoelectric Materials 1.00
Three‐In‐One Structural Design Enables High‐Stability Co‐Free Li‐Rich Cathodes 1.00
Ultra‐Reversible Electrochemical Behavior of Silicon with Dense Penetrating Stacking Faults via Crystal Engineering 0.86
Giant Negative Compressibility in 2D Hybrid Perovskites via Configuration Transition and Rotation of Carbon Chains 1.00
Critical Role of Cation Exchange in Hierarchical Hollow NiCoCe‐Hydroxides Cathode with Multi‐Effects for High‐Performance Alkaline Zn Battery 1.00
Synergistic Optimization of LiMn0.6Fe0.4PO4 Cathode Material Structure and Electron/Ion Transport via Trace V-Ti Co-Doping to Achieve Electrochemical Performance Enhancement 1.00
Significant Enhancement of Electrocaloric Effect in Ferroelectric Polymer via Nanopores Interfacial Engineering 1.00
Lattice Planification and Synergistic Cu/Sn Co‐Doping to Enhance Thermoelectric Performance in Polycrystalline PbSe 1.00
Chemical Pressure-Driven Three- and Four-Phonon Scattering in SnTe: Toward Suppressed Lattice Thermal Conductivity and Enhanced Thermoelectric Performance 1.00
Promoted OH− Adsorption and Cl− Repulsion Ability of Ce-Decorated NiFe@CuO for Alkaline Seawater Electrolysis 1.00
Self-Sacrificial Templated Lithium Manganese Oxide as a Longevous Cathode: The Intermarriage of Oxygen Defects and Zeolitic Imidazolate Framework Glass 1.00
Ferroelectricity and Interfacial Engineering in Low-Bandgap Ag0.9K0.1NbO3: Achieving Robust Coexistence of Piezo/Pyro/Photovoltaic Effects for Multimodal Tactile Sensing 1.00
Ultrafast Reconstruction of Ni‐Based Alloy Precatalyst for Robust Seawater Oxidation 0.83
Achieving Uniform Ti/P Co-Modifications for Optimized Li+ Transport Kinetics of LiCoO2 1.00
In Situ Engineering of a 3D Branched Polyimide/Silver Interface Layer with Dual Ion‐Electron Conductivity for Superior Structural Integrity and Long‐Cycle Stability of Silicon Anodes 1.00
A Corrosion‐Resistant Amorphous/Crystalline Heterostructured Catalyst for Industrial‐Level Seawater Electrolysis in Membrane Electrode Assembly Electrolyzer 1.00
Water Evaporation-Enhanced Thermogalvanic Cell for Waste Steam Utilizing 1.00
Self-Adaptive Built-in Electric Fields Drive High-Rate Lithium-Ion Storage in C@Li3VO4 Heterostructures 1.00
Phytic Acid-Modified Black Phosphorus Nanosheets Achieve Ultrahigh Load Bearing and Rapid Superlubrication on Engineered Steel Surfaces 1.00
Ultrahigh Thermoelectric Properties of PEDOT:PSS Films by Dedoping and π‐π Overlapping With 4‐(1,3‐dimethyl‐2,3‐dihydro‐1H‐benzoimidazol‐2‐yl)phenyl)Dimethylamine (N‐DMBI) 0.44
Spontaneous-Chessboard-Ordered Structure of PbMg0.5W0.5O3 Multilayer Capacitors Offers Giant Electrocaloric Enthalpy Change Below Room Temperature 0.94
A Universal Binder Enables Stable Operation of High-Capacity Electrodes for Energy-Dense Batteries 1.00
Direct Regeneration of Degraded High-Nickel Layered Cathode with a Grain-Growth Inhibitor by Epitaxial Boundaries 1.00
In Situ Engineering a Dual‐Anion Rejection Interface for High‐Efficiency Oxygen Evolution in Alkaline Seawater 0.93
Structure Modulation of Defective Hierarchical Carbon Materials for Ultrahigh-Rate and Stable Energy Storage 1.00
Dynamic Reconstruction of Crystal/Amorphous Hetero‐Phosphate Janus Interfaces for Highly Stable Seawater Splitting 0.58
66 58.95
Enhanced Internal Magnetic Field for Long-Cycle NCM-Li All-Solid-State Batteries via Dual-Inhibition of Anode Dendrite and Cathode Cation Disorder 1.00
Multifunctional Cu Doping Enhances Electron Transport and Thermoelectric Performance in n-Type BiSbSe3 1.00
Pulsed Electrolysis Prevents Sulfur Poisoning for Sustained Sulfide Valorization 1.00
Confined Assembly of Polymer Nanowires for High‐Performance Organic Thermoelectrics 1.00
From Inert to Active: Breaking Mott-localization Enables High Na-Storage Performance in Na4MnFe(PO4)3-based Cathode 1.00
Engineering-Grade Macroscale Superlubricity Under Ultrahigh Contact Pressure in Atmospheric Air via Multiscale Synergistic Meta-Interfaces 1.00
High-Performance Flexible Pyroelectric Energy Harvesting System Enabled by Light-Driven Thermomechanical Coupling in Liquid Crystal Elastomer 0.85
Separation of Hydrogen and Graphite from Natural Gas Through Nickel Atomic Lattice 1.00
Intensified Accumulation of OH− and Improved Electron Transfer by Reactive Chlorine-Resistant Layer Achieve High-Durability Seawater Electrolysis 1.00
Cu2FeS2: Discovery of an Exceptional Thermoplasmonic Semiconductor via Arrested Cation Exchange 1.00
An Integrated Stainless Steel-Based Electrode for Durable Direct Natural Seawater Electrolysis 0.82
Giant Specific Power Generation Capacity of Micro‐Thermoelectric Generators Enabled by High‐Entropy Cocktail Strategy 1.00
Elastic Ferroelectric by Radiation Crosslinking 1.00
Unleashing the Electromechanical Response of Ferroelastic Domain Reorganization in Mixed‐Phase Tetragonal Ferroelectric Multilayers 0.04
Solid-State N-Type Ionic Thermoelectric Based on Polyanions Enabled by Water State Regulation via MXenes 1.00
Porous Bi2S3 Bulk With Excellent Thermoelectric Performance by Solid States Replacement and Low Melting-Point Metal Volatilization 0.80
Dislocation-Enhanced Pyroelectricity in Barium Titanate 0.53
Pb(Zr0.52Ti0.48)O3 Ferroelectric Ceramic X-Ray Detectors with High-Temperature Self-Driven Sensitivity and Low Detection Limit 1.00
Demystifying Tunneled Niobium Molybdenum Oxide With Near‐Zero‐Strain for Hydrogen Bond‐Assisted Ammonium Ion Storage 1.00
Multi-Polar Order Engineering Enables Near-Ideal Efficiency in Lead-Free Energy Storage Perovskite 1.00
Gradient-Acceptor-Doping Breaks the Piezoelectric Trade-Off in Lead-Free (K, Na)NbO3 Ceramics 0.87
Machine-Learning-Designed BCZT–SBT Heterointerface Unlocks Fatigue-Resistant Energy Storage 1.00
Electrically Tunable Friction: From Sticky to Slippery with Ionic Hydrogels 0.25
Flow‐Regime‐Controlled Fabrication of CNT‐Bridged Vertically Aligned rGO/MXene Fibers for High‐Performance Fiber Supercapacitors 1.00
Topological Structure-Induced Piezoelectricity from the α-Phase Poly(Vinylidene Fluoride) 0.94
Dual Vacancy-Driven “Lattice Softening” NiFeAlx LDHs for High-Rate and Durable Chloride Ion Storage 0.92
Achieving Ultrahigh n‐Type Thermoelectric Power Factor in an Intrinsically Large Transport‐Fermi Energy Gap Conjugated Polymer 1.00
In Situ Self-Adaptive Structure Evolution Under Volume Fluctuation Toward High-Performance Silicon-Based Anode 0.91
Superior Energy-Storage Performance in Sandwich-Structured AgNbO3-Based Ceramics 1.00
Constructing Topological Vortex Domains in Polar Nano‐Regions Enables High‐Capacitive Energy Storage 0.89
Synergistic Material-Interface Engineering: Unlocking Superior Performance in PbSe Thermoelectric Modules 1.00
In Situ 3D Conductive Networks and Interfacial Bonding to Stabilize Oxygen Vacancies for Single-Crystal Ni-Rich Cathodes 1.00
Synergistic Microstructure and Composition Engineering via Na2S Enables High-Performance Porous PbTe Thermoelectrics with Ultrahigh Device Power Density 0.70
Ni‐X (X = Cl, Br) Reaction Energy Barrier Regulation in Passive Film for Stable Oxygen Evolution Reaction in Alkaline Seawater 1.00
Fe/Co Co-Doping Engineering for Corrosion-Resistant and Effective Seawater Electrolysis 1.00
Octahedral Twisting‐Mediated van der Waals Stacking Induces Ultralow Thermal Conductivity 1.00
Acupuncture‐Inspired Active‐Material Microenvironment Engineering for High‐Throughput Thick Electrodes by Instant Microneedle Templating 1.00
Quantitative Tactile Sensing of Surface Microstructures Through Time‐Domain Analysis of Piezoelectric Twin Signals 0.25
Lattice‐Prestressed Niobium Tungsten Oxide Enables Near‐Zero Volume Change and Ultrafast Lithium Storage 1.00
Direct Recycling of Degraded LiFePO4 Cathode Material via Natural Electron Donors Healing and Targeted Surface Reconstruction 1.00
Phase Stabilization of In2Se3 by Disordered Ni Intercalation and its Enhanced Thermoelectrical Performance 1.00
Oxygen Vacancy‐Abundant Molybdenum Dioxide Electrodes with Minimal Interfacial Charge‐Transfer Resistance for Ultrafast Filter Electrochemical Capacitors 1.00
Nature‐Inspired MXene Electrode with the Highly Interconnected Gradient Nanoconfined Architecture 0.93
Self-Doped Cu2+xZn1-xSnSe4 Nanosheets for Enhanced Thermoelectric Catalytic-Ferroptotic Therapy 1.00
Dimensional Crossover Engineering in MoS2/Organic Superlattices Breaks the zT Barrier for 2D Thermoelectrics 0.88
Dirac Fermion and Phonon Coupling Toward Giant Nernst Thermoelectric Performance in Topological Semimetal TaSb2 1.00
A Universal Orientation‐Engineering Strategy for Enhancing Mechano‐Electric Conversion Performance in Semi‐Crystalline Biopolymers 1.00
Ultrasensitive Mechanoluminescence of Pr3+-Doped Perovskite Oxide for 3D Strain Sensing and Visualization 1.00
Strong Lewis Acid Effect in the Pores of Metal–Organic Framework Host for Dendrite‐Free Lithium Deposition and Stripping 1.00
Sound, Force and Light Induced Emissions from Er3+-Mn2+ Doped ZnS/CaZnOS Heterostructure for Remote Temperature Monitoring via Photo- and Mechanoluminescence 0.25
Amorphizing Iron Molybdate as a High‐Capacity Cathode for Lithium Metal Batteries Enabled by Multiple Insertion Reactions in the Metastable Structure 0.63
Unidirectional Electrobending Deformation in Acceptor‐Doped Piezoceramics 1.00
Early Terminating Solid Electrolyte Interphase Formation via Nucleophilic Fluorination to Achieve High Initial Coulombic Efficiency 0.14
Morphotropic Phase Boundary in Irradiated Ferroelectric Polymers 1.00
Effect of Combination Model of MoTe2 and MXene Layers on Sodium Ion Storage 1.00
Potential‐Controlled Pre‐SEI Regulation for Improved Lithium Reversibility in Anode‐Free Solid‐State Lithium Metal Batteries 1.00
Intensive Widmannstätten Nanoprecipitates Catalyze SnTe With State‐of‐the‐Art Thermoelectric Performance 0.64
Unleashing the Kinetic Limitation of Co‐Free Li‐Rich Mn‐Based Cathodes via Ionic/Electronic Dual‐Regulation 0.85
Origami Silicon Anodes: Geometric Design for Structural Elasticity and Connectivity 1.00
Decoupling Self-Matching Effect Between Cathode and Anode in Hybrid Electrochemical Capacitors 1.00
Excellent Energy Storage Performance of Polymorphic Modulated Antiferroelectric Lead Zirconate Ceramic 1.00
Resonant Levels Induced Seebeck Coefficient Matching Contributes to High Thermoelectric Cooling Efficiency in p‐type SnSe Crystals 1.00
High-Entropy Li-Rich Layered Cathodes with Negligible Voltage Decay through Migration Retardation Effect 0.89
Versatile Superlubricity via Boronizing on Engineering Alloys: Insights into In Situ Passivation Mechanism 1.00
One‐Step Synthesis of Co‐Ni‐O‐S Nanohybrid with Amorphous‐Nanocrystalline Interwoven Architecture for High‐Energy‐Density Supercapacitor‐Battery Hybrids 1.00
High‐Temperature High‐Voltage Thermal Charging Cells Enabled by Ca–Li Dual‐Cationic Ionic Liquid Electrolytes and Anionophilic Separators 1.00
3 3.00
Quantitative Monitoring of Crystalline Phase Transformation and Orientation Evolution in Poly(vinylidene fluoride) Using Terahertz Spectral Imaging 1.00
Quantification of Organic Nitrates Using Thermal Dissociation Broadband Cavity-Enhanced Absorption Spectroscopy: Interference Suppression and Atmospheric Measurement 1.00
Direct Mass Spectrometric Detection of n-Alkanes via Water Radical Cation-Induced C–H Activation 1.00
41 38.14
NaO6 Octahedron-Engineered Sodium Iron Sulfate Cathodes for High-Rate and Sustainable Sodium-Ion Batteries 1.00
Bioinspired Starch-Polyiodide Electrolytes for Self-Healing Lithium-Metal Interfaces and Stable Photoelectrochemical Energy Storage 0.91
Selective Electrocatalytic Hydrogenation of Phenol to Cyclohexanone at Industrial‐Relevant Current Density 1.00
Lead-Doping Enabled Band Engineering and Phonon Transport Modulation: Key to High-Performance Thermoelectric AgSbTe2 1.00
An Adaptive High-Entropy Superstructure Cathode: Concurrently Tackling Phase Transition, Oxygen Redox, and Ambient Stability for Potassium-Ion Batteries 0.73
Structure Tailoring Enabled Self-Catalyzed Imidization for Engineering a Highly Adhesive and Ion-Conductive Polyimide Network Toward Ultra-Stable Silicon Anodes 1.00
Formate-Anion-Induced Water Network Reshaping Enables Concurrent Hydrogen and Magnesium Hydroxide Production From Seawater 1.00
Ionic Coordination and Hierarchical Architecture Enable Record n‐Type Thermoelectric Efficiency in Soft Hydrogels 0.20
One-Step Side-Chain Cleaving and In Situ Doping of Open-Shell Thermoelectric Polymers 0.83
Multiferroic Orders and Piezoelectric Sensing in an Organic‐Inorganic Bismuth Halide 1.00
Constructing High‐Power N‐Type Thermocells via Fluoride‐Mediated Imidazole–Iodine Coordination 0.94
Chemical Fluctuations and In-Situ Structural Order Unlock High-Performance Mg3Bi1.4Sb0.6-Based Thermoelectrics 1.00
Stabilizing Micro‐Sized Silicon Oxides by Durable Hydrogen Chemistry 1.00
Constructing Wide-Temperature-Range Li–S Batteries Through Synergistic Boride Spin-Polarization Coupling Regulation and Magnetohydrodynamic Effects 1.00
Intrinsic Elastification of Ferroelectric Poly(vinylidene fluoride) Homopolymers 1.00
Dynamic Self-Organizing Lithium Bonds for High Energy Density Lithium Batteries 1.00
Sharpened Dirac Cone and Elevated Carrier Mobility in Bi4Te3 Engineered by a High [Bi2] Bilayer Content for Thermoelectrics 1.00
Hetero-Composition and Homo-Structure Decoupling Charge and Phonon Properties in p-Type Thermoelectric SnAgBiTeSe2 1.00
Single‐Atom and 1 nm Cluster Co‐Modified Thermoelectrics 0.92
A Value-Added Solar-Mediated Rechargeable Battery Integrating Efficient Photoelectrochemical Energy Storage with Sunlight-Boosted Self-Powered H2O2 Production from Natural Seawater 1.00
HALOM Method: An Efficient and Accurate Neutron Diffraction‐Independent Approach for Determining Hydrogen Locations in Metal Hydride Nanoclusters 1.00
Water‐Processable Covalent‐and‐Supramolecular Polymeric Binders for Silicon/Carbon Anodes with High Interfacial Stability in Lithium‐Ion Batteries 1.00
Efficient Ethanol Dehydrogenation to Acetaldehyde and H2 via Synergistic Thermocatalysis and Electrocatalysis 1.00
Scaleup Sodium-Ion Capacitor Ah-Level Pouch Cells Enable 100 C Ultrafast Charging Capabilities 1.00
Phosphorus‐Enhanced Anodes: A Scalable Solution to Transition‐Metal Ion Crosstalk in High‐Energy Lithium‐Ion Batteries 1.00
Stabilizing Configurational Entropy in Spinel-type High Entropy Oxides during Discharge–Charge by Overcoming Kinetic Sluggish Diffusion 0.82
Fluoride-Engineered Electrolyte for Highly Stable and Efficient Alkaline Seawater Electrolysis at 2 A cm−2 0.96
High Energy Density Heterostructured Sodium Layered Oxide Cathodes Enabled by Mechanical‐Chemical Coupling Effect 0.73
Mechanically Robust Bilayer Solid Electrolyte Interphase Enabled by Sequential Decomposition Mechanism for High-Performance Micron-Sized SiOx Anodes 0.93
A Universal Voltage‐Enhancement Strategy Based on Multifunctional Ligand‐Mediated Modulation for Na‐Layered Oxide Cathode 1.00
Single Atom‐Substituted Chalcogenides with Anion Vacancy Bonded on Graphene Nanotubes for Achieving “1+1+1gt;3” Synergistic Enhanced Sodium Storage 1.00
Heterointerfacial Charge Modulation of p‐Type Covalent Organic Frameworks on Graphene Achieving High‐Performance Clsup−/sup Ion Storage with Ultralong Cycling Life 1.00
Electron Delocalization‐Driven Dual‐Electron Redox Chemistry in NiCo‐LDH for High‐Capacity Aqueous Ni–Zn Batteries 1.00
Ultrafast Construct Local Acidic Microenvironment of Boron‐Intercalated Osmium with Anti‐Precipitation and Corrosion‐Resistant for Seawater‐splitting 0.78
In Situ Solid Conversion into Mechanically Adaptive LiF-Rich Solid Electrolyte Interphase via MgF2 Precursor on Si Surface in Lithium-Ion Batteries 1.00
Mediating Solid Electrolyte Interphase Formation Kinetics on SiOx Anodes Using Proton Acceptors 1.00
Photovoltaic Absorber “Glues” for Efficient Bifacial Selenium Photovoltaics 1.00
Enhancing the Reversibility and Kinetics of Heterovalent Ion‐Substituted Mn‐Based Prussian Blue Analogue Cathodes via Intervalence Charge Transfer 1.00
Unraveling CO-Tolerance Mechanism in Proton Exchange Membrane Fuel Cells via Operando Infrared Spectroscopy 1.00
Ultralow Thermal Conductivity in Halogen-Doped PbSnS2 with Optimized Thermoelectric Properties 0.58
Anion Adsorption at the Inner-Helmholtz Plane Directs Cathode Electrolyte Interphase Formation 0.82
53 45.87
Characterizing electro-thermal balance of zero-emission ammonia-fed solid oxide fuel cell systems integrated into hybrid propulsion plant for marine applications 0.50
A flexible hybrid-energy heat pump using efficient ionic liquids for sustainable solar cooling 1.00
Insight into safety and economic trade-offs for high-pressure PEMEC operation using Bayesian optimization 0.57
Digital twin-enabled dynamic 4E-S multi-objective optimization framework for intelligent gas turbine operation with flexible loads 1.00
Integrated design for underwater thermoelectric generator (TEG) based on fully coupled multiphysics fields analysis method 1.00
A carbon-negative solar fuel production method with enhanced solar contribution and superior CO2 reduction capacity: Experimental and system investigation 1.00
Dynamic performance and control of Carnot battery-based combined cooling, heating and power systems with cascaded latent thermal energy stores 0.71
A heat-driven thermoacoustic refrigerator/heat pump for solar-thermal application: Building cooling and heating solution with low-cost potential and high performance 1.00
Integrating methane partial oxidation and thermoelectric generation in a Swiss-roll reactor: Hydrogen and electricity dual production and life cycle assessment 0.17
Compression-absorption hybrid heat pumps operating wide temperature ranges: A review and perspectives for large temperature lift 1.00
One-step thermal engineering of FTO substrate: unlocking higher-efficiency perovskite solar cells 1.00
Experimental investigation on an energy-focused type OWC WEC array 1.00
Recent progress of chemical looping technology for waste plastic conversion 1.00
Dynamic modeling of heat and mass transfer in photovoltaic-electrolyzer systems: Implications for system design and safety 1.00
Coupled numerical framework for wind-wave-to-wire energy conversion in floating hybrid wind-wave systems 0.79
Efficiency analysis of large-scale vanadium redox flow battery at different temperature conditions: a validated model-based study 0.20
A few-shot learning framework for HVAC fault diagnosis in data centers with minimal data required 0.50
Experimental insights into the trade-off in thermally regenerative electrochemical batteries 1.00
Dominant factor identification and fast optimization of carnot battery by integrating SHAP and physics-guided neural network 1.00
Recent advances in lignin-based gel electrolytes for energy storage 1.00
A new application study of liquefied natural gas in assisting in the start-up of the liquid air energy storage system without sufficient cold storage energy 0.86
Quantitative analysis of polarization kinetic for proton electrolyte membrane electrolyzer using the distribution of relaxation times of impedance 1.00
Identification of key control variables for a methanation unit through system analysis using experimental results 0.25
Statistical analysis of floating hybrid wind–wave energy systems 0.10
Techno-economic analysis of a novel heat-power decoupling system of molten salt coupled steam accumulator used in gas-steam combined cycle CHP unit 0.71
A dynamic coupling strategy for wave-WEC farm interactions: Implications on regional wave climate and wave energy deployment 0.33
Design of a hemispherical reactor with radiation regulation for efficient solar thermochemical fuel production 1.00
Distributionally robust chance-constrained energy management of steel industrial microgrid with energy storage in distribution market 1.00
Exploring the efficiency and stability performance of fuel cells without external humidifiers based on real vehicle testing 1.00
Dynamic tracking MPP control of offshore bifacial floating photovoltaic systems with improved EMPC accounting for chaotic properties 1.00
Distributed multi-objective African vulture accelerated optimization intelligent algorithm for multi-objective economic dispatch of power systems 1.00
Experimental and theoretical analysis of a dual-source heat pump system with PVT assistance and adaptive combined throttling regulation for summer applications 1.00
Latching control of a point absorber wave energy converter in irregular wave environments coupling computational fluid dynamics and deep reinforcement learning 1.00
Comprehensive understanding of efficient Electrocatalysts for seawater splitting: Challenges, advances and prospects 1.00
Optimal model-based electrochemical characteristics and thermal management of reversible solid oxide cells 1.00
Numerical investigation on a floating multi-chamber pneumatic wave energy conversion device with three sub-units 1.00
Energy storage in supercapacitor researches: Interdisciplinary applications from molecular simulations to machine learning 1.00
Off-grid green hydrogen production and liquefaction system driven by renewable energy and LNG cold energy: A comprehensive 4E analysis and optimization 0.80
Experimental investigation of all-regime control for supercritical CO2 Brayton cycle system 1.00
A partitioning design method for regenerator in transcritical CO2 power cycle based on heat matching 1.00
Performance analysis of a underwater power transcritical CO2 cycle system prototype 1.00
A distributionally robust collaborative scheduling and benefit fallocation method for interconnected microgrids considering tail risk assessment 0.63
A novel multi-generation liquid air energy storage system coupled with air separation unit: Thermodynamic and economic analysis 1.00
Effects of novel nonlinear flow channels inspired by classical mathematical function on the output performance and low-grade heat recovery efficiency of thermally regenerative ammonia-based flow battery 0.75
Research progress on the structure design of nano-silicon anode for high-energy lithium-ion battery 1.00
Doubling the thermo-osmotic energy conversion efficiency through the reduction of heat and mass transfer resistance 1.00
Experimental investigation of transcritical CO2 mixture power cycle with dual heat sources 1.00
Conceptualization and investigations on a cooling-heating co-generation and step-utilization heat pump for efficient direct air capture 1.00
An advanced moving-boundary method for the dynamic simulation of split heat pump system under start-up process 1.00
Developments of acid fracturing technology for enhanced geothermal systems: A review 1.00
Advanced thermal management for oxygen pump assisted solar thermochemical reactor for fuel production 1.00
Bridging efficiency and scalability: A systematic evaluation of diamond wire sawn silicon wafer texturing technologies for high-performance photovoltaics 1.00
A data-driven hybrid robust optimization approach for microgrid operators in the energy reserve market considering different wind power producers’ strategies 1.00
95 90.45
Hard particle effects on frictional heating of PBX surrogates characterized by high spatiotemporal resolution 1.00
Enhanced thermoelectric properties of AgBi3S5 through grain boundary and band engineering via Te alloying and Cd doping 1.00
Metal-modulated phonon transport in porphyrin-based MOFs 1.00
Multi-strategy cooperative optimization of thermoelectric performance in higher manganese silicide-based materials 1.00
Anomalous in-plane thermal conductivity suppression and dominant optical phonon transport in SnSe2/SnTe2 superlattice 1.00
Orientation-engineered Bi0.5Sb1.5Te3 films with enhanced mobility for high-performance thermoelectric and photothermoelectric energy conversion 1.00
Experimental evidence of strong intrinsic defect-induced phonon scattering in 2D non-layered β-In2S3 1.00
Salinity gradient energy scavenging via insoluble organic molecule electrodes 1.00
Improved electro-actuation performance of polyurethane-based dielectric elastomer under ultra-low electric fields via introducing soft functional filler 0.75
Mechanism for enhancing the power conversion efficiency of Cu2ZnSn(S,Se)4 solar cells via MgF2 anti-reflection coating deposition 1.00
Counter-rotating electromagnetic generator with planetary gear amplification for low-frequency wave energy harvesting 0.75
Anomalously low thermal conductivity in a light-element cubic semiconductor: Cubic BeB2 1.00
Lattice thermal conductivity origin of Mg3Sb2: A study via self-consistent phonon theory with bubble correction 1.00
Bulk β-SrZrS3 sulfide perovskite: A mechanically robust platform with thermoelectric potential beyond thin-film optoelectronics 1.00
Synergistic phase regulation and heterojunction engineering achieve ultrahigh-energy density in ferroelectric polymers 0.88
Interlayer coupling and twist-induced modulation of heat transport in multilayer β-bismuthene 1.00
Extended multi-temperature model for electron–phonon coupling and ultrafast thermal transport in graphene 0.33
Observing femtosecond laser damage failure of a MoS2 thin film as an ultrafast photoacoustic transducer 1.00
Temperature-dependent band renormalization in half-Heusler MNiSn and MCoSb (M = Ti, Zr, Hf) 1.00
Lattice dynamics of piezoelectric response of organic–inorganic hybrid perovskites 1.00
Integrated AlGaAs/GaAs betavoltaic arrays with low self-discharge LiCoO2 batteries for efficient β-energy conversion and storage 1.00
High-energy density in dielectric film capacitors via interface engineering and polarization behavior regulation 1.00
Unveiling bonding heterogeneity-driven anharmonicity and ultralow lattice thermal conductivity in NbSe2Br2: A machine learning accelerated discovery 1.00
Interfacial modulation enhanced field sensitivity of the magnetization reversal process in the two-dimensional ferromagnet Fe3GeTe2 1.00
Rigid-flexible free-standing multichannel carbon nanofiber-silicon composite anodes due to PS-induced channel ordering 1.00
Design of high-efficiency Ga2O3-based betavoltaic battery utilizing the MG-HJ-PND structure 1.00
Rattling-induced anharmonicity and multi-valley enhanced thermoelectric performance in layered SmZnSbO material 1.00
RuO2@MoOx heterostructure for high-performance and quasi-solid-state biodegradable supercapacitor 1.00
In situ nanoscale insights into the piezoresponse in ferroelectric composite fiber 1.00
Synergism of CoFe2O4 additives and P(VDF-TrFE) barriers in crystallization, polar phase, and electrocaloric effects of multilayer composite thin films 1.00
Revealing phonon signature of dislocations in silicon carbide using machine-learning interatomic potential 1.00
Coherent phonon tunneling-driven ultralow and non-monotonic thermal conductivity in quasi-0D Cs3Cu2I5 1.00
Energy loss quantification and efficiency enhancing strategies for radioluminescent batteries 1.00
High-performance heat flux sensors based on the TTE effect of c-axis inclined Pb-doped BiCuTeO films 1.00
Anisotropic electrical transports in rolled Ag2Se film 1.00
Significant Seebeck coefficients driven by coexisting Dirac bands and van Hove singularities in bilayer Kagome borophene 1.00
Exceptional piezoelectric performance originating from the development of distinct domains under AC electric field 1.00
Transient photoinduced cubic-like phase transition in orthorhombic SnSe 1.00
Atomic-scale mechanisms of stress-controlled nanocrystal nucleation in amorphous alloys 1.00
Colloidal nanocrystal assembly enables composition and doping engineering for high-performance PbS-based thermoelectrics 0.80
Interface-driven phonon scattering and carrier dynamics in asymmetric GeS/GeSe van der Waals heterostructure 1.00
Optimizing the microstructure of pure Te alloys with metals doping for improving thermoelectric properties 1.00
Titanium oxynitride electron-selective contact for crystalline silicon solar cells 1.00
On the ambient conditions crystal structure of AgSbTe2 0.46
MoSi2N4/MoGe2N4 heterojunction: A theoretical exploration for high-efficiency excitonic solar cell and visible-light photohydrolytic catalyst 1.00
A ultra-high-temperature free-piston thermoacoustic Stirling heat pump capable of achieving above 200 °C 1.00
Thermoelectric properties of AgBiS2: Unveiling the origin of ultra-low lattice thermal conductivity and optimization strategies for electrical performance 1.00
Experimental evidence of impurity-induced selective short-mean-free-path phonon scatterings in β-Ga2O3 1.00
Plasma-induced formation of wavy graphite structures for enhanced lithium storage 1.00
Boosting spectral response at band edge and charge transport in CZTSSe solar cells by periodic Mo back-contact texturing 1.00
Rational design of high-conductivity α-Ag2S through first-principles guided dopant screening 1.00
Rethinking redox electrolyte design: Why diffusion layer ion exchange matters more than surface area 1.00
Carrier–phonon decoupling via annealing enhances thermoelectric performance of Bi2(Te,Se)3 1.00
Building-up process of power conversion in carbon-electrode-based, hole-conductor-free mesoscopic perovskite solar cells 1.00
Substantial enhancement of thermoelectric performance in n-type AgBiSe2 via Mn3+ doping 1.00
Flexible glycine-based piezoelectric medical dressing for wound repair 1.00
Magnetoelectric composite engineered dielectric energy storage in flexible film capacitor devices 1.00
Enhancement of thermoelectric performance in Bi2S3 enabled by pressure-induced electronic topological transition 1.00
Magnetic-field-dependent ultrafast carrier dynamics and spin–lattice interaction in Au nanopillar/La0.67Sr0.33MnO3 film composites 1.00
Strain-driven transition of phonon scattering mechanisms in BiOCl monolayer: From three-phonon to four-phonon scattering 1.00
Rockseline lead chalcogenides: An alternative class of high-performance thermoelectric materials 1.00
Free-carrier screening unlocks high electron mobility in ultrawide bandgap semiconductor CaSnO3 1.00
Strategically optimized diffusion dynamics in Ni9S8 nanoflower architectures for high-performance asymmetric supercapacitors 0.17
Interelectrode space optimization in photon-enhanced thermionic emission solar cells with near-field radiative transfer and bidirectional space-charge effects 1.00
The rapid thermal annealing in hole transition layer amelioration for enhancing large-area perovskite solar cell ivia/i potential regulation and hole induction 1.00
High-performance pulsed light detector based on the transverse thermoelectric effect of the c-axis inclined BiCuTeO:Agx films 1.00
Phonon transport across Si/Ge interfaces with amorphous interlayers: Elastic–inelastic phonon competition 1.00
Negative differential friction predicted in a 2D GaInS3 homojunction with multiple sliding pathways 1.00
Phonon entropy in the electrocaloric effect of BaTiO3: A study based on dual-phase-transition mechanisms 1.00
Synergistic optimization effects of energy band and interface engineering on the thermoelectric properties of Bi0.46Sb1.54Te3 1.00
Enhanced in-plane thermal conductivity of polar SrTiO3 by surface phonon polaritons within dual Reststrahlen band 1.00
Grain orientation dependent superelasticity in ferroelectrics for enhanced electromechanical properties 1.00
Remarkably suppressed lattice thermal conductivity of InAs nanowires by surface electron–phonon coupling 1.00
Interface phonon coupling-boosted photo-thermoelectric response in a SrTiO3/PbSe heterostructure 1.00
Suppressed phonon transport and strong four-phonon scattering in zeolite-like SOD-MO (M = Mg, Zn, Cd) 1.00
Van der Waals epitaxy of (Bi1−xInx)2Te3 solid solutions with a broad operating temperature range for thin-film thermoelectrics 1.00
Nonequilibrium-controlled charge-carrier transitions in SnSe single crystals 1.00
Boosting piezoelectric response in lead-free KNN crystals via direct current and alternating current poling 1.00
Effective reduction in thermal conductivity by high-density dislocations in SrTiO3 0.38
Precise characterization of Peltier heat at the heterointerface based on thermography 1.00
Enhanced electrocaloric effect in relaxor ferroelectric polymers through hot press processing 1.00
A hexagonal phase of BiCuTeO films: Growth, crystal structure, and thermoelectric properties 1.00
Mitigating carrier loss in photoelectrochemical photocathodes: An approach combining optical computation and experimental validation 0.81
Simultaneously optimizing power factor and thermal conductivity of n-type PbTe 1.00
Investigation of thermoelectric transport properties of c-axis oriented SnSb2Te4 thin-film fabricated using pulsed laser deposition technology 1.00
Interfacial thermal transport suppression by hydrogen insertion in an epitaxial Al/Si heterostructure 1.00
Observation of conflicting Seebeck coefficient and Hall coefficient in Sb-doped MnBi4Te7 crystals 1.00
Broad-pH-value photocatalyst of Janus MXene monolayers functionalized with group VIA elements 1.00
High thermoelectric performance of monolayer Janus ZniAX/iTe (A = Ge, Sn; X = S, Se) induced by large band degeneracy and low lattice thermal conductivity 1.00
Domain wall scattering determining the transmittance of transparent ferroelectric crystals 1.00
Spray solution combustion synthesis of undoped Ca3Co4O9: High thermoelectric performance through grain orientation and moderate texture 0.13
Optimization of HWCVD-grown i-a-Si:H films through synergistic adjustment of hydrogen dilution ratio and hot-wire temperature 1.00
Dilute MnBi2Te4-alloying enables high-performance GeTe thermoelectrics 1.00
Oriented nanocrystalline silicon oxide contact enables excellent passivation for silicon solar cells 1.00
Out-of-plane polarization engineering: Optimizing exciton dissociation and solar-to-hydrogen efficiency in photocatalytic water splitting 1.00
38 37.20
A microwave–heat–thermoelectric cascade platform for dynamic therapy based on Schottky-engineered bismuth telluride nanosheets 1.00
Scalable NiFe layered double hydroxides for efficient electrocatalytic seawater oxidation at high current density 1.00
Non-topotactic transformation pathway in electrochemical Li+/Na+ ion-exchanged Na–Mn–Fe phosphates for sodium-ion batteries 1.00
Synergistic electronic structure modulation and lattice fortification in hierarchical potassium titanate nanowires for aqueous manganese-ion batteries 1.00
Enhancing perovskite detector performance via bias-induced aging: a reproducible and universal approach 1.00
REV3(BO3)4 (RE = La–Nd): a series of rare earth vanadoborates exhibit large birefringence induced by distorted VIIIO6 groups 1.00
Hydrogen-bonding guar gum stabilizes solid-state Si anodes 1.00
Achieving efficient and robust seawater oxidation through rational design of V2O3/NiFeP composite 0.85
Exploration of metal-ionic liquids for enhancing electron conductivity and thermoelectric properties of single-walled carbon nanotube composites 1.00
Harnessing 4f–3d synergy in Ce–Fe heterostructure: a PBA-derived oxygen reservoir for stable high-capacity lithium storage 1.00
Tailoring Lewis acid sites in lanthanum-doped carbon nitride for H2O2 synthesis and efficient photocatalytic degradation of antibiotics 1.00
Pulse-electrodeposited Cr/Fe–Ni(OH)2 on nickel felt for scalable fabrication of a highly efficient and stable anode for seawater splitting 1.00
Defect engineering in cellulose for piezocatalytic generation of hydrogen peroxide under ambient conditions 1.00
Boosting Li–S redox chemistry by the plasmonic effect of MXene 1.00
Facile fabrication of a covalently-bonded carbon–sulfur composite from lignin for high-capacity potassium storage 1.00
Dual B and Fe doping boosts seawater oxidation on a Co3O4 nanoarray 0.75
A neutral zinc–air capacitor-battery: a hybrid energy storage system achieving high energy and power performance 1.00
A plasma spray modulating porous NiAl coating on nickel mesh for hydrogen and oxygen evolution 1.00
A Ta3N5/BN composite for enhanced photocatalytic water splitting 1.00
Synergistic electronic and crystal structure regulation of Na2+2xFe2−x(SO4)3via Zr doping for high-performance sodium-ion batteries 1.00
In situ one-pot synthesis of organic-functionalized crystalline silicon nanoparticles 1.00
Enlarging the redox energy level gap to improve the structural stability in wide-voltage layered sodium cathodes 1.00
Induced nanostructured MnO2 on carbon cloth with optimized sodium-ion storage capability for self-supporting supercapacitors 0.86
Polypyrrole-engineered nickel-based composite electrodes for thermocells with enhanced power output and stability 1.00
Graphene/mesoporous carbon/ZIF-derived carbon heterostructures via interface-reinforced assembly for capacitive energy storage 1.00
Ni(OH)2/NiFe-PBA heterostructure nanoarrays with a surface-reconstructed Cl− repelling layer for efficient and stable seawater electrolysis 1.00
Versatile 1D-structured Co3O4–Co/NC@N–carbon nanotubes for high-performance lithium storage 1.00
A synergistic strategy of Fe doping and anion protection enables efficient and robust seawater electrolysis 0.86
A conjugated conductive polymer coating towards a robust micro-Si anode for lithium storage 1.00
Bimetallic-MOF derivatives enabled 3D carbon cloth as a lithium sponge for a high-performance lithium-metal anode 1.00
V5O12·6H2O/f-MWCNT/rGO hybrid aerogels as high-performance electrode materials for zinc-ion supercapacitors 1.00
Interfacial chemical bond engineering on a Te semiconductor to weaken carrier–phonon coupling to boost thermoelectric conversion performance 1.00
Ultrafine FeCo2O4/Fe2O3 nanoparticles anchored on carbon nanotubes as high-performance anode materials for lithium-ion batteries 1.00
Recent advances in transition metal sulfide-based electrode materials for supercapacitors 0.89
Recent developments in advanced anode materials for sodium-ion capacitors: a mini-review 1.00
Enhanced electrochemical performance of NH4V4O10 in aqueous zinc-ion batteries via PVP intercalation and oxygen vacancy engineering 1.00
Engineering iron sulfide/carbon co-coated silicon nanoparticles as a lithium-ion battery anode displaying stable capacity and rate-performance 1.00
Computational approaches to electrolyte design for advanced lithium-ion batteries 1.00
12 11.80
Regenerating spent LiFePO4 with tailored molecular groups: from bulk lattice repair to surface conductive coating for enhanced cycling stability 1.00
Natural monosaccharide-based piezoelectric supramolecular materials for energy harvesting and information transmission 1.00
Unveiling the electron–phonon coupling anisotropy in 2D covalent organic frameworks 0.86
Stimulating the Lewis acidity of Pt–O–Co bridges via vacancy engineering for efficient hydrogen evolution in seawater 1.00
Synergistic effect of MOF fillers and succinonitrile in PEO-based electrolytes for long-cycle all-solid-state Li–CO2 batteries 1.00
Unraveling the origin of enhanced safety in capacitive-type carbon electrodes for 20C sodium-ion capacitors 0.94
Dual-anion regulation engineering enhances chloridion corrosion resistance for long-lasting industrial-scale seawater splitting 1.00
Promoting cationic redox and stabilizing lattice oxygen in an Fe-based DRX cathode by the synergy of initial Li deficiency and 3D hierarchical porous architecture 1.00
Modulation of the electronic structure of nickel selenide via iron doping for energy-saving hydrogen production coupled with sulfion upgradation 1.00
Inhibitions imposed by kinetic constraints of membranes in all-solid-state ion-selective electrodes: characteristics of interfacial capacitance in solid contacts 1.00
High-performance elastic ferroelectrics via low-temperature carbene crosslinking and high-temperature annealing 1.00
Unconventional pathway for the gas-phase formation of 14π-PAHs via self-reaction of the resonantly stabilized radical fulvenallenyl (C7H5˙) 1.00
410 386.68
Low-carbon power generation from multiple fuels: Thermodynamic and economic analysis of power plants integrating CLC with supercritical CO2 cycle 1.00
Decoupling efficiency and reliability in thermoelectric modules: A structural strategy with edge insulation and compliant conductors 1.00
An innovative cross-heat-exchange concept integrating a supercritical CO2 cycle and a subcritical high-temperature organic Rankine cycle 0.88
Research on hysteresis comparison-based MPPT control strategy for multi-stage hybrid energy storage WEC 1.00
Experimental and numerical investigation on the geometric optimization of a twin-hull BBDB-OWC platform 1.00
Cascade Feedforward Neural Network based Deep Greedy Search: An Efficient MPPT Strategy for Proton Exchange Membrane Fuel Cell System 1.00
A Comparative Study of ORC Configurations for Multi-Source Waste Heat Recovery Onboard Ships 1.00
Investigation of the coupling mechanism between structural parameters of thermoelectric coolers and heat sink thermal resistance 1.00
Working salt solution screening for adsorption-based power and cooling cogeneration osmotic heat engines 1.00
Technical Feasibility Analysis of Using Axial Compressor as Turbine for Pumped Thermal Energy Storage Systems with Air and sCO2 Working Fluids 1.00
Experimental study on energy efficiency optimization of the cabinet-level variable-speed loop thermosyphon system for 5G TBS 1.00
Performance and Key Parameters of Brine-Compensated Salt Cavern Isobaric Compressed Air Energy Storage Systems 1.00
Thermodynamic modeling and performance analysis of freezing concentration for frost-free air source heat pumps solution regeneration in cold regions 1.00
Dynamic simulation and analysis of a SrBr2-H2O high-temperature thermochemical heat transformer for continuous industrial heating 1.00
Analysis of borehole stability during hydrothermal energy exploitation in underground mines 0.75
Research on ionic liquid circulation method based on high-pressure common rail concept for ionic liquid hydrogen compressors and its impact on compressor energy efficiency 0.82
Multi-Objective Optimization of a Hybrid Gas Turbine Combined Cycle System with LNG Cold Energy Integration 1.00
Development of Novel Thermodynamic Cycles of Chemical Heat Pump for High-Temperature Heat Lifting 1.00
Influence of mesoscopic heterogeneity on fracture behavior in high-temperature granite subjected to CO2 fracturing 1.00
Multi-objective optimization and comprehensive performance analysis of a novel reverse absorption heat pump for blackwater waste heat recovery 0.80
Comprehensive evaluation and multi-objective optimization of shutdown purge of proton exchange membrane fuel cell based on response surface methodology and genetic algorithm 1.00
Hydrodynamic Performance of OWC-WEC Arrays Integrated with an Improved Parabolic Breakwater Featuring Submerged Sloped Sections 1.00
An ultra-high-temperature heat pump with multiple liquid separation condensation and ejector-assisted multi-pressure evaporation for large temperature lifts 1.00
Ejector-enhanced transcritical CO2 dual-temperature refrigeration system with integrated waste heat recovery: System design and annual performance evaluation 1.00
Automated configuration synthesis of solid oxide fuel cell – gas turbine (SOFC-GT) hybrid systems: A fuel-syngas block state-mapping approach under SOFC safety constraints 1.00
Enhancing the energy capture performance of wave energy converters by applying tuned apertures: An experimental and numerical study 1.00
A novel generator-absorber heat exchange based NH3/H2O cross-type absorption-resorption heat pump: Exergoeconomic modeling, multi-objective optimization, and performance assessment for industrial waste heat recovery 1.00
Heat extraction assessment and fracture monitoring of abandoned reservoirs transformed into fractured closed-loop geothermal systems: semi-analytical models, numerical models, and economic benefit analysis 1.00
Performance enhancement of heat-driven thermoacoustic cryocooler with acoustic power bypass configuration 1.00
Optimal Design of Efficient Operation Mode for Advanced Adiabatic Compressed Air Energy Storage Under Wide-Range Sliding Pressure Conditions 1.00
Compression scheme comparison for a carbon dioxide energy storage system 1.00
Proposal and evaluation of a hydrogen-power-heat cogeneration system using solar-driven supercritical water co-gasification of sludge and coal 1.00
Optimal design of heat exchange configuration for the supercritical CO2 Brayton cycle applied to gas turbine waste heat recovery 1.00
Performance investigation of a quasi-saturated compression high-temperature heat pump system with water-injection 1.00
Efficiency mapping and loss analysis of ORC radial inflow turbines using an optimized mean-line design methodology 1.00
A novel organic Rankine cycle system with coupled dual vortex tubes: A comprehensive 5E analysis, life cycle assessment, and multi-objective optimization 1.00
MINLP-based optimization of multi–flow coupling system for FCC–steam system–renewable energy integration toward methanol synthesis from captured CO2 1.00
Performance-oriented evaluation of regeneration strategies from industrial waste heat to chemical energy with preheating and internal heating 1.00
Comprehensive performance analysis and optimization of the closed Brayton cycle for waste heat recovery and cooling in hydrogen aeroengines 0.75
Energy, exergy and environmental analysis of Rankine cycle for a steady state CFETR power plant with divertor as preheater 1.00
Enhancing Lattice Oxygen Migration and Regeneration of Oxygen Carriers in CO Chemical Looping Combustion via Interface Structures in Inverse CeO2/Cu2O 1.00
Thermodynamic and exergoeconomic assessment of a novel self-sustaining pressure regulation system with decoupled vortex tube-ejector for natural gas city gate stations 1.00
Employing thermodynamic-exergoeconomic approach and multi-objective optimization of an efficient SOFC-based multi-integrated system, generating liquefied hydrogen 0.20
Energy, exergy, exergoeconomic, and environment analyses of a composition adjustment zeotropic Linder-Hampson cycle 1.00
Synergistic design of multi-metallic Fe-based oxygen carriers for microwave-assisted chemical looping gasification of municipal sewage sludge 1.00
Collective prediction of power performance and fatigue loads in wave energy converters using a data-driven approach 0.25
Off-Design Analysis and Multi-Mode Operation Strategy for a Transcritical CO2 Power Cycle applied to Deep-Sea Applications 1.00
Internal flow characteristics and performance evaluation of centripetal turbines in Ocean Thermal Energy Conversion 1.00
Deep Neural Network-Based Surrogate Modeling Assisted Design Optimization of Cryogenic Supercritical Hydrogen Storage System with LNG Cryogenic Energy Integration 1.00
Fine-tuning of thermal properties for enhanced cooling performance in flexible thin-film electrocaloric device 1.00
Investigation on the correlation between supply–return water temperature difference and frosting–defrosting performance of air source heat pumps 1.00
A Generalizable Neural Network Model for Supercritical CO2 Turbine Performance and Map Generation Method 1.00
High-Power Post-Positioned Gas Spring Hybrid Thermoacoustic Electric Generator: Dynamic and Stable Performance Characterization 0.94
Hydrodynamic characteristics of hybrid immersed dual-buoy WEC integrated with Jarlan-type breakwater 0.94
An underground constant-pressure CAES system based on staged multi-level compression: Thermodynamic modeling and performance analysis 0.79
Transforming Geothermal Hazards in Mines into Sustainable Power Generation for Energy Conservation and Thermal Environment Management 1.00
Non-blackbody radiation exergy analysis model based on equivalent temperature method for energy conversion application 1.00
Matching design method and performance evaluation of the organic Rankine cycle system as an alternative to energy-consuming cooling system 1.00
Temperature-rise matching and optimization of a recompression high-temperature steam heat pump system with staged subcooling 1.00
Influence of Inlet Distortion on Stall Inception in Supercritical CO2 Compressor 1.00
Photo-assisted chemical looping toluene reforming for improved hydrogen and syngas Co-production under mild conditions 1.00
Comparative Analysis of a Double Flash Geothermal System Integrated with a Transcritical Carbon Dioxide Cycle and an Organic Rankine Cycle for Waste Heat Recovery 0.03
Pinch and exergy analyses of a trigeneration system by coupling liquified natural gas and biomass gasification 1.00
Configuration Optimization of Ship Integrated Energy System with Organic Rankine Cycle Based on SCSSA 1.00
A novel multi-vane expander with rolling piston: Numerical simulation and performance parameter analysis 1.00
Chemical Looping Gasification of Pine Wood over Layer-Confined Ni: Loading-Packing Synergy and Cyclic Stability 1.00
Investigation of Flow Losses and Characteristics in Volute and Collector of sCO2 centrifugal compressors for Advanced Brayton Cycles 1.00
Investigation on the evolution in physiochemical properties of soot from ammonia/diesel engines along the after-treatment devices in the exhaust process 1.00
Performance study and multi-objective optimization of 3D cylindrical oscillating water column wave energy converter: balancing efficiency and structural cost 0.71
Impact of parabolic breakwater on the safety characteristics of shared mooring floating oscillating water column devices array under freak waves 1.00
Experiment on composition-adjustable combined cooling and power cycle with CO2-based zeotropic mixture: An off-design performance investigation 1.00
Thermodynamic and Economic Analysis of a SRCO2–MEOFC–HTSC Multi-cycle Coupled System for Power and Steam Cogeneration Utilizing Medium- and High-Temperature Waste Heat 1.00
A Solar-Driven Biogas Reforming Reactor for Enhanced Hydrogen Production Based on Cascaded-Optimized Thermal Matching 0.88
Study of power recovery mechanism and system-level thermodynamic optimization of a novel compression high-temperature heat pump 1.00
Numerical Design and Optimization of an Ammonia-Fueled Solid Oxide Fuel Cell (SOFC) Combined Heat and Power System for Urban Heating Stations 1.00
Real-time multi-objective energy management for fuel cell vehicles via temporal-frequency fusion speed prediction and local optimal SOC feedback 1.00
An anti-frosting air source heat pump integrated with condensation heat recovery and PCM storage for liquid desiccant regeneration 1.00
Configuration comparison and performance analysis of the thermally integrated Carnot battery systems based on the flash technology 1.00
Advanced solar-methanol thermochemical system for near-zero-emission hydrogen-electricity cogeneration: A dynamic and seasonal 4E case study 1.00
Composition adjustment strategy investigation and experimental validation for a liquid separation condensation-based ORC 1.00
Comprehensive analysis on heating performance characteristics of a photovoltaic-driven vapor injection variable refrigerant flow system 1.00
A state reconfiguration theory for thermodynamic systems and its modular design toward higher efficiency at low load 1.00
Synergistic deep flue gas heat recovery using corrosion-resistant wall-type condensing heat exchangers coupled with absorption heat pumps 1.00
Dynamic electro-thermal-gas multi-physics attribution and optimization of PEMFC–LaNi5 coupled system for ship auxiliary power units 1.00
Investigation of gimbaled pendulum dynamics for broadband wave energy harvesting 1.00
Experimental study of a segmented-buoy wave energy converter integrated with a monopile-based offshore wind turbine 0.80
Efficiency enhancement of a unidirectional impulse turbine for dual-chamber OWC wave energy converters 0.86
Improved loss evaluation models for sCO2 centrifugal compressors based on qualitative and quantitative analysis 1.00
Research on the hierarchical coordinated control method of Helium-Xenon Brayton cycle power generation system 1.00
Study on the influence of Injection Frequency by Exhaust Area Regulation on Gas Wave Refrigeration and Performance Optimization 1.00
Innovative energy-saving and simplified hydrogen liquefaction system using LNG cold energy 0.88
Parameter study and multi-objective optimization analysis on gasification characteristics of supercritical methane in a submerged combustion vaporizer 1.00
Advanced exergy and exergoeconomic analyses of a novel low-temperature industrial waste driven combined power and hydrogen system 0.78
Experimental Study on the Operating Characteristics of High-Temperature Heat Pipe–Stirling Thermoelectric Conversion Systems 1.00
A Simplified Aesthetic 3D Graphical Optimization Method for Variable-Composition Thermodynamic Cycles 0.80
5E Analysis and Multiple-objective Optimizations of LNG Cold Energy Cascade Utilization System based on Liquid Air Energy Storage and Air Separation Unit integration 1.00
Performance evaluation and optimization of a novel combined cooling, heating, power, and freshwater poly-generation system integrated with methanol-fueled solid oxide fuel cell and internal combustion engine 1.00
Multi objective optimization of energy management for fuel cell electric vehicles under different driving conditions based on based on improved double Q-network algorithm 1.00
Modelling and experimental validation of a polygeneration system for hydrogen, power and ammonia using sorption-enhanced chemical looping steam reforming with in-situ carbon capture and utilization integrated with chemical looping combustion and water splitting 1.00
Performance analysis and multi-objective optimization of PV/T coupled transcritical CO2 heat pump under wide temperature range conditions 1.00
Thermodynamic, environmental, and economic analysis of an auto-thermal supercritical water gasification system of coal for synthesis gas cogeneration 1.00
Experimental investigation on performance enhancement of an air source heat pump by using a novel vapor bypass approach 1.00
Novel packed column for mass transfer enhancement of ammonia-water distillation process using ultrasonic oscillation technology 1.00
Thermodynamic analysis of a three-stage cascade reactor system with ejector-driven recirculation for supercritical water gasification 1.00
Investigation of influencing factors and prediction models of cold-wet island effect intensity for optimizing the operating of air source heat pump array 1.00
State of charge estimation and elucidation of sodium-ion batteries based on electrochemical impedance spectroscopy characteristics 1.00
Improving the exergy performance of the ionic liquid compression system for hydrogen storage by operating parameter optimisation 1.00
Energetic performance and driving range investigation of the CO2 indirect system with ejector used in vehicle thermal management 1.00
Unveiling the unique role of thermal contact resistance in spacecraft thermal control system via fractal geometry 1.00
Performance enhancement of thermoelectric modules through the introduction of macro-porous thermoelectric leg 1.00
Design and optimization of a liquid air energy storage system coupling dry ice production and solar absorption refrigeration system 1.00
Improving helium liquefaction efficiency in the Reverse-Brayton Refrigeration Cycle Based on the Temperature-Distributed Refrigeration Method 1.00
Advanced exergy analysis of a carbon dioxide Brayton cycle pumped thermal electricity storage system with wide liquid temperature range molten salt 1.00
Development of a universal frosting rate prediction model for optimizing the defrosting control strategy of air source heat pumps 0.90
Integrated Performance Analysis and Prediction for a Tesla Turbine in Advanced Adiabatic Compressed Air Energy Storage Systems 1.00
Thermodynamic and exergoeconomic analysis and multi-objective optimization of a novel tank-free transcritical CO2 energy storage system 1.00
A simultaneous synthesis method for optimizing supercritical CO2 power cycles integrating topological and heat exchanger network design 1.00
Wave energy extraction from a semi-circular oscillating water column attached to a straight breakwater 0.50
A diagnosis and classification method for energy efficiency anomalies in mechatronic equipment based on multi-condition inherent energy efficiency benchmark 1.00
A comparative study on effectiveness method and pinch analysis method in the thermodynamic investigation of supercritical CO2 power cycle 1.00
Process Modeling and Thermal Integration of Coal-fired Power Plants with Advanced CO2 Capture Using 2-Amino-2-methyl-1-propanol / Piperazine 1.00
Thermodynamic analysis and life cycle assessment of three hydrogen-based polygeneration systems for co-producing power and freshwater 1.00
Development of an improved oxy-methanol combustion combined cycle with chemical and physical heat recuperation 1.00
Multi-objective optimization study of Organic Rankine Cycle system driven by combined grain drying waste heat and solar energy 1.00
Optimization of Dual-Organic Rankine Cycle for LNG wide temperature range cold energy utilization based on Genetic Algorithm 0.89
Experimental and numerical study on optimizing thermoelectric generator for improved energy efficiency of heat recovery 1.00
Particle swarm and multi-objective optimization algorithm for heat sink configuration of a two-stage precision thermoelectric refrigeration 1.00
Optimizing the thermal and energy efficiency of a thermoelectric-based battery thermal management system via adaptive control strategies and phase change materials 1.00
Analysis and optimization of thermoelectric generator for improved heat recovery and conversion efficiency of engine exhaust systems 1.00
Part-Load Efficiency and NOx Emissions in Steam-Injected vs. Methane-Reforming GTCC under Combined VIGV-Steam Control 1.00
Operational optimization of multi-unit parallel pressure differential power generation in natural gas networks 1.00
Performance Study on the Innovative Application of Radial Oscillation Tubes in Gas Wave Ejectors 1.00
Multi-objective optimisation and comparison of solar-liquefied natural gas expansion cycle combined organic Rankine cycles under three distribution pressures 1.00
Machine Learning-Driven Optimization of an Integrated Renewable Energy System for Power, Water, and Cooling with CO2 Capture 0.75
Performance and sensitivity analysis of a novel user-side CHP system integrating steam methane reforming and multi-stack LT-PEMFCs 1.00
Multigeneration integrated biomass system using date pits for cleaner production: A deep learning model integrating multi objective multi-verse optimizer with Monte Carlo sensitivity analysis and thermo-economic optimization 0.88
Performance comparison of an overfeed large-scale photovoltaic-thermal heat pump under different numbers of operating compressors 1.00
Thermodynamic, environmental, and economic analysis of a novel dual-mode ejector-enhanced CO2 cooling and heating system 1.00
Multiobjective optimization of ammonia-based hydrogen-storage systems using thermodynamic and neural-network models 1.00
Analysis and optimization of a novel two-phase spray injection heat pump suitable for extremely cold conditions 1.00
Proposal and optimization of novel heat pump cycles with the Tesla turbine as an expansion device 1.00
A bibliometric analysis of oscillating-water-column wave energy converters: emerging trends and research frontiers 0.83
A Multi-Objective Optimization for Engine Performance and Emissions Through Ethanol-Water Fuel Blends and Compression Ratio Variation 1.00
Numerical and experimental study on a multi-body articulated wave energy converter 1.00
Dynamic supply-demand matching and operational parametric study of a solar single-effect absorption/compression cascade thermal battery system 1.00
Latching control of a bi-oscillator wave energy converter considers both the signal transmission and actuator execution latency effects 1.00
Design, construction and sea trials of the 20 kW ocean thermal energy conversion in the South China Sea 1.00
A physically interpretable machine-learning method in efficiently and explicitly exploring predictive thermodynamic models for mixture working fluids 1.00
Hydrodynamic investigation on a cylindrical OWC wave energy converter equipped with a local energy concentration device 1.00
Hotspot selection and complementarity for combined offshore wind and wave energy utilization in the China East Adjacent Seas 1.00
Efficient heat upgrading in concentrated solar thermal conversion using chemical heat pump 1.00
Thermal-flow coupling mechanism of multi-nozzle air injection for compressed air energy storage in abandoned mine roadway 1.00
Multi-objective optimization of an airfoil fin printed circuit LNG vaporizer with thermoelectric modules based on fuzzy inference Taguchi method 1.00
Frequency-domain heat current method for dynamic analysis of thermal systems 1.00
A novel multi-scale fully coupled method for simulation and lifecycle performance optimization of enhanced geothermal systems 1.00
Research on the matching modes between the thermal storage methods and working fluid types of the thermally integrated Carnot battery system 1.00
Performance analysis of a biomass gasification power system combined with the molten salt thermal storage for heavy oil thermal recovery and power supply 1.00
Multi-objective optimization of supercritical carbon dioxide Brayton cycles using Bayesian physics-informed neural networks: A comprehensive analysis of energy, exergy, economic, and environmental performance 0.86
Influence weights of key parameters and optimization strategies for non-contact thermoelectric generator performance enhancement 1.00
Analysis of 5E (energy, exergy, energy level, exergoeconomics, and exergetic sustainability) for a transcritical CO2 energy storage system integrated with ORC and solar energy 1.00
A comprehensive study on the impact of turbomachinery synergy on the thermodynamic performance of supercritical carbon dioxide reheated recompression cycle 1.00
Design and analysis of a cascade solid-packed bed cold storage system using liquid heat transfer fluids for liquid air energy storage 1.00
Ionic thermoelectric osmotic energy conversion for harvesting low-grade waste heat from electronic heat sink 1.00
Study on the thermodynamic characteristics of an expansion/regeneration/intercooling-coupled CO2 high-temperature heat pump cycle across full operating conditions 1.00
Coupling mechanism study of a free-piston Stirling engine–linear alternator–pulse tube cryocooler tri-system 1.00
A comprehensive analysis of novel environmentally friendly refrigerants in high-temperature heat pumps for industrial heating 0.93
Effect of Internal Losses on the Thermodynamic Performance of a Supercritical Carbon Dioxide Brayton Cycle System 1.00
Multi-objective optimization and comprehensive assessment of CO2-based mixtures with thermal stability constraints for parabolic trough concentrated solar thermal power plants 1.00
Hydrodynamic performance of a multi-float pendulum wave energy converter coupled with a monopile wind turbine 1.00
Study on the characteristics of CO2 seepage and heat transfer in rough fractures based on thermo-hydro-mechanical coupling 1.00
Experimental study on the Heat-Transfer Mechanisms and Thermophysical Characteristics of Flue Gas–Molten Salt Systems 1.00
Synergistic Thermodynamic Analysis of Integrated Power-Water Cogeneration: Near-Isothermal Compression for Desalination and Energy Storage 1.00
Enhancing the power generation of a single-buoy built-in wave energy converter by using two damping wings: Experimental and numerical investigation 1.00
Wave energy resources in China’s largest archipelago from a 30-year high-resolution hindcast 1.00
Accelerating multi-energy system online optimization via integer state variable prediction with operation strategy learning 1.00
Multi-parameter matching optimization of cooling performance and thermal stress in variable cross-section thermoelectric legs 1.00
Energy Distribution and Thermodynamic Assessment of Cavitating Coolant Flow in a Micropump 1.00
Potential application of radiative sky subcooling used for CO2 refrigeration system in commercial supermarket throughout the world: Energy saving and decarbonization assessment 1.00
Characteristic simulation and full dimensional performance analysis of ammonia production system by chemical chain gasification coupled with water gas shift 1.00
Investigation into the switching mechanism of photovoltaic-thermal power heat pipe/heat pump composite cycle system in cogeneration mode 1.00
Layout optimization of oscillating water column (OWC) wave energy converter (WEC) array coupled with a parabolic-wall energy concentrator 1.00
Enhancing wave energy conversion in oscillating water column devices using breather valve-based pneumatic regulation: A CFD study 0.75
Synergistic analysis via Aspen and MATLAB of cryo-compressed hydrogen production process based on liquid nitrogen cooling including pre-cooling 1.00
Power capture and output of a three-degree-of-freedom wave energy converter with a parallel hydraulic cylinder system 1.00
Thermodynamic and economic analysis of an advanced liquid air energy storage system coupled with LNG cold energy, waste heat and solar energy 1.00
Comprehensive performance improvement of methanol/diesel dual-fuel engines using multi-physics field coupling simulation and surrogate-assisted many-objective optimization 1.00
Life cycle assessment, techno-economic and environmental analysis of an innovative integration air power cycle with LNG cold energy utilization in a biomass-fueled multi-generation plant: Soft computing technique and multi-objective optimization approaches 0.33
Numerical Study and Optimal Control of an Oscillating-Body Wave Energy Converter with a Hydraulic PTO System 1.00
Optimized cold-end structure in a MTPV-MTEG utilization system: Analysis of combustion characteristics and energy efficiency 1.00
Hydrodynamic and power-capturing performances of the dual-tube oscillating water column device: a numerical study 1.00
An innovative solar power tower system coupling double-reheaters and subcritical cascade Rankine cycle 0.90
Numerical and experimental study of a novel four-stage thermoacoustic engine with multi-looped structure 1.00
Experimental research on frost growth in high-temperature environments and implications for energy efficiency 0.73
Design, Modeling and Optimization of Rolling Wave Energy Converter 1.00
Full-condition operation prediction and parameter control model of ocean thermal energy conversion experimental platform based on improved neural network 1.00
Multi-objective optimization of a multiple heat sources small-scale organic Rankine cycle with quasi two stage single screw expander using machine learning techniques 1.00
Numerical insights into impact of rock matrix and fracture characteristics on sCO2-enhanced geothermal heat extraction 1.00
Multi-objective optimization and experimental investigation of radial gas wave refrigerator 1.00
Thermodynamic and economic analysis of an adiabatic compressed air energy storage system coupled with an air separation unit 1.00
Performance evaluation of a novel integrated two-stage Rankine cycle and carbon dioxide energy storage system for LNG cold energy recovery 1.00
Sensitivity analysis of the system exergy performance of the thermally integrated-Carnot battery based on the orthogonal design method 1.00
Enhancing supercritical CO2 compressor performance in closed brayton Cycle: Exploring inlet guide vane adjustment in gas-like and liquid-like states 1.00
Performance comparison and optimization of thermoelectric generator systems with/without stepped-configuration 1.00
Characteristics and Performance of Very-high-temperature Heat Pump under Unconventional Conditions that may occur in normal operation ─ Experimental Investigation 1.00
Sequential topology generation based on stage-wise concept and multi-objective integrated optimization of supercritical CO2 cycle 1.00
A novel coupled system of compressed air energy storage system and air separation unit: Thermodynamic and economic evaluation 1.00
Thermo-economic evaluation of Carnot battery integrated with high-temperature waste heat 1.00
Innovative design and performance evaluation of a compact 1 MW radial inflow turbine with non-azeotropic fluids for ocean thermal energy conversion applications 1.00
A novel hybrid semi-closed supercritical CO2 power cycle with zero emissions driven by both concentrated solar thermal energy and oxy-fuel combustion 1.00
Investigation of the effects of alkali and alkaline earth metals on performance of oxygen carrier for chemical looping hydrogen production 1.00
Optimal Leg Ratio Design for Segmented Thermoelectric Generator via Thermal Conductivity Matching 1.00
Cryogenic Carnot battery energy storage system for utilization of LNG cold energy: Optimization, thermodynamic and economic analysis 1.00
Experimental Validation of Single and Multi-objective Optimization of Microbial Fuel Cell based on Recent Electric Eel Foraging Algorithm 0.13
Performance Study and Economic Analysis of LNG Cold Energy Integrated with Liquid Air Energy Storage: Simulation and Experiment 1.00
Integrated LNG cold energy-based system combining liquid air energy storage and air separation unit: A novel synergistic solution for supply-demand coordination and power grid peak-shaving 1.00
Experimental investigation of Tesla turbine under different operating parameters and load conditions using air as working fluid 1.00
Synergistic Enhancement of Co-Torrefaction on Combustion Characteristics of Maize Straw and Algae Blends: Kinetic and Ash Analysis 1.00
Synchronous bio-oil upgrading and CO2 fixation: Pulsed electrolysis enhancement strategy 1.00
Sulfur-anchored oxygen vacancies boost ion storage in supercapacitor electrodes 1.00
Experimental and numerical investigation on multi-factors for improving thermal performance and energy efficiency of the H2/CH4 fueled thermoelectric generator 1.00
Numerical study on thermal-work conversion performance of dynamic system driven by temperature difference between evaporation and condensation 1.00
Thermal analysis and configuration optimization of Organic Rankine Cycle for waste heat recovery from a steady state Chinese Fusion Engineering Testing Power Reactor 1.00
Thermodynamic analysis of a novel high-efficiency coal-based sCO2 power cycle combining semi-closed oxy-combustion cycle with sCO2 Brayton cycle 1.00
Aeroderivative gas turbine integrated with supercritical CO2 cycle for gas-to-power: Comprehensive assessment and optimization 1.00
Experiment investigation of an ejector-enhanced regenerative refrigeration system with zeotropic mixture 1.00
Study on the thermal stability and performance evaluation of CO2/HFO-1234ze(E) mixtures in transcritical power cycles: Insights from CVHD simulation and thermodynamic analysis 1.00
Developing a modular thermoelectric generator for large-scale direct geothermal power generation from hot dry rock combined with a super-long heat pipe 1.00
Hydrothermal carbonization of multi-components in Biomass: Prediction and analysis of solid fuel properties 1.00
Dynamic regulation strategy of the SCO2 Brayton cycle system based on PCM and its instability evaluation model 0.83
Development of an improved part-load operation strategy for the recompression semi-closed CO2 cycle 1.00
Study on the hydrocarbon mixtures in high-temperature heat pump systems for industrial waste heat recovery 1.00
A generic design method for heat pumps subject to heat exchanger network cost and complexity 1.00
Multi-dimensional performance optimization of CO2 mixture power generation system using ANN and double-helix weighting mechanism 1.00
Low-temperature proton-exchange membrane fuel cell coupled with compression-assisted absorption refrigeration for low-carbon transport 1.00
Development, dynamic analysis, and experimental evaluation of a hybrid wave-tidal energy converter featuring nonlinear dual inputs 0.17
Heat pump-assisted waste heat recovery for thermal management in hydrogen-enabled integrated energy systems 1.00
Construction of a supercritical CO2 Brayton cycle waste heat utilization system using the dichotomy 1.00
An auto-thermal poly-generation hydrogen production system based on supercritical water gasification of oily wastewater: Thermodynamic and Environmental Analysis 1.00
Optimization and year-round trigeneration performance analysis of the photovoltaic thermal heat pump system: a case of engineering application 1.00
Experimental and numerical optimization of a scroll expander for small-scale ORC systems using pure and mixture working fluids 1.00
Heat transfer improvement and fouling analysis of flue gas driven molten-salt-heat-exchanger with inclined tube and staggered H-type fins 1.00
Thermodynamic investigation of an efficient combined power and refrigeration cycle designed for providing variable energy output 1.00
Thermodynamic comparison of cryogenic air separation units with external and internal compression of oxygen designed for the coal-fueled Allam cycle 1.00
A novel low-energy, low-cost air separation unit integrating heat pump recovery and off-peak cold storage: An energy, exergy, and economic performance analysis 1.00
Evaluation of production performance in open-loop systems for repurposed abandoned oil wells into geothermal wells: A comparative study of various single-well types 1.00
Thermodynamic analysis and optimization of a novel semi-closed supercritical CO2 power cycle integrated with an air separation unit incorporating LNG cold energy utilization 1.00
Multi-objective optimization and performance analysis of CCHP system for working fluid selecting mechanism modeling 1.00
Data-driven wide-load modeling and electricity-heat coordinated control for the supercritical combined heat and power unit 1.00
Thermodynamic insight into the integration of supercritical water gasification and solid oxide fuel cells for waste plastic energy recovery 1.00
Experimental study on the wave energy capture performance of a dual-chamber oscillating water column wave energy converter 1.00
Application of thermoelectric generators and organic Rankine cycle combined system for cold exergy recovery from liquefied natural gas 0.83
Photon-enhanced thermionic emission solar converters with light-transparent anode: Observing significant efficiency boost 1.00
Study on isothermal thermochemical CO2 splitting: CALPHAD for thermodynamic analysis of spinel FeAl2O4 1.00
Graphite plates for enhanced high-temperature stability and thermal uniformity in thermoelectric generators applied to range-extending engine 0.75
5E analysis and optimization of marine parallel SOFC-engine-WHR integrated systems supplied with different low carbon fuel combinations 1.00
Frost suppression performance and degradation mitigation strategy of superhydrophobic air source heat pump 0.89
Mining geothermal energy by Electrically Enhanced Geothermal System(EEGS): A new development model of Hot Dry Rock 0.71
Experimental study on combined cooling and heating supply of a transcritical CO2 heat pump based on high-temperature heating optimization 1.00
Artificial Intelligence-Driven Multi-Facet Study/Optimization of a Methane Fueled Low-Carbon CCP-Desalination System Using Oxyfuel Combustion and Goswami Cycle 0.10
Dynamic Behavior and Control Efficacy in Carnot Battery Systems: A Comparative Study of Feedforward, PID, and Combined Control Methods 1.00
Off-Design Performance of Variable-Speed Compressed Air Energy Storage System under Different Operation Schemes 1.00
Energy, exergy and economic analysis of a dual-nozzle ejector-enhanced high-temperature heat pump cycle 1.00
Hydrodynamic and energy-harvesting performance of an array of taut-moored point-absorber wave energy converters 0.20
A novel supercritical CO2 thermoacoustic circulation pump: Flow rate modeling and enhancement 1.00
LCA-based Environment and Economic Assessment of UCG Coupled with CCS for Methanol Production 1.00
Wave power capture performance of an over-actuated power take-off system 1.00
Numerical analysis of a novel double-scroll air compressor with co-rotating variable cross-section for fuel cells 1.00
Geometric Optimization of Dual-Chain Transmission Wave Energy Converter Based on Response Surface Method 1.00
A-Site Engineering of Iron-Based Perovskites for Syngas Production via Biogas Chemical Looping Reforming 1.00
Analysis of the correlation between effective compression ratio and effective expansion ratio and multi-parameters optimization in an asynchronous intake valve Miller cycle spark-ignition engine 1.00
A novel flexible wave energy converter for concealed power supply to submersible marine buoys: experimental study and mode analysis 1.00
Experimental Study of a Small-Scale Refrigeration System with High Efficiency by Ultra-Fast Centrifugal Compressor 1.00
Effect of methane/water flowrate on waste heat recovery and hydrogen production by steam methane reforming process and predicted by artificial neural network (ANN) 0.94
Thermodynamic and environmental performance assessment of an ejector-based organic Rankine cycle coupled with chemical looping combustion for combined cooling and power 1.00
Advance on combustion-driven free piston Stirling generator with helical tube heat exchanger 1.00
Organic Rankine cycle configuration design method based on the performance of all operating conditions 1.00
Sustainable energy development goals of an organic waste biorefinery model for agriculture economies 0.60
Numerical optimization and experimental study on the hybrid system of pendulum wave energy converter and floating breakwater 1.00
Energy, exergy, economic and environmental (4E) evaluation of an improved cogeneration system based on compressed air energy storage and absorption heat pump 1.00
Discharging via the low-pressure section of the thermal power plant: a new integrated Carnot battery concept and the performance evaluation 1.00
Thermodynamic and safety analysis for hydrogen production in a supercritical water gasification system of coal by multi-oxidizers distribution 1.00
Design and performance analysis of a coal-fired power plant integrated with high and low temperature molten salt thermal storage for improving peaking capacity 1.00
Multi-Physics Coupling Mechanisms and Key Development Factors in Enhanced Geothermal Systems for Hot Dry Rock 1.00
Thermodynamic response of underground caverns for compressed air energy storage considering different operational modes of the energy storage system 1.00
Analysis of a novel hydrogen liquefaction process based on a mixed refrigerant Brayton cryogenic cycle utilizing LNG cooling: energy, exergy, economy and environment 1.00
4E analysis on a hybrid sustainable and decarbonised system for LNG cold energy recovery 1.00
Deep reinforcement learning-based stability control for biomass thermal-electric conversion system: Experimental analysis and multi-physics coupled modeling 1.00
Experimental study on power matrix and energy capture spectrum of a wind-wave hybrid system under random wave conditions 1.00
Performance enhancement of a vapor compression cycle with R32/R1234yf by using internal heat exchanger 1.00
Thermo-economic analysis of an H2-fueled SOFC/GT/SCO2/ST/ORC polygeneration system based on zero-carbon emissions 1.00
Performance analysis and optimization of a double X-type thermoelectric generator with a lateral hollow structure 0.83
Conventional and advanced exergy-exergoeconomic assessment of pumped thermal energy storage integration in enhanced thermally coupled methanol decomposition reaction 1.00
A Heat-Driven Thermoacoustic Heat Pump Supplying Heat Up to 270 °C 1.00
4E Assessment on a CCHP Cogeneration Brayton System with Dimensional Design of PCHEs and Turbomachinery 0.50
Efficiency analysis of a R290 heat pump system using linear compressor with different piston offset control methods 0.86
Hydrodynamic analysis of a multi-chamber OWC array over coral reef bathymetry 1.00
Hydrodynamic analysis and optimisation of a novel wind-wave hybrid system combined with the semi-submersible platform and various wave energy converters 1.00
An enhanced MES strategy for economic recovery and low-carbon operations: Incorporating time-lag superposition and hydrogen-electricity interdependency in chain accidents 1.00
Energy recovery characteristics analysis of permanent magnet electrodynamic wheel Maglev vehicle system based on heat-electricity energy conversion strategy under static suspension condition 1.00
Life cycle assessment, exergoenvironmental analysis, and AI-driven optimization of an oxy-biogas power plant combined with liquefied CO2 and H2 generation units 0.20
Proposal and thermodynamic analysis of a novel oxy-methanol combustion gas turbine combined cycle with zero emission 1.00
Improving the performance of wave energy converters using a multi-dimensional floater driven by six parallel hydraulic cylinder 1.00
Research on the performance of thermoelectric generation system for self-powered devices in smart heating system 1.00
The combustion characteristics of hydrothermal carbonization products from traditional Chinese medicine residue 1.00
Multi-objective optimization of a low temperature thermoelectric generation system with variable material properties and air gap heat dissipation based on energy, economic and environmental analysis method 1.00
Multi-stage liquid separation condensation high-temperature heat pump system using zeotropic working fluid: System construction and comparison with traditional solutions 1.00
Evaluation of the ethane reliquefaction system integrated with the fuel gas supply system of the large ethane carrier 0.17
Thermodynamic, sensitivity analyses and optimization of a dual-stage diaphragm compressor system: A model-based and experimental study 0.88
Study on the gasification mechanisms of key intermediates of oily sludge in supercritical water by ReaxFF-MD method 1.00
An intensive review of ORC-based pumped thermal energy storage 0.80
Damage detection of wind turbine blades via physics-informed neural networks and microphone array 1.00
Eco-friendly energy generation model of a tri-generation system using renewable biogas fuel, Brayton cycle, and Rankine cycles for sustainable electricity, heating, and cooling production 0.50
Coupled hydro-aero-turbo dynamics of liquid-tank system for wave energy harvesting: Numerical modelings and scaled prototype tests 0.80
Thermochemical water splitting cycles for green hydrogen production – a comprehensive performance assessment 0.60
Natural Gas Reforming for LNG and Methanol Production: Sustainability and Economic Viability 1.00
Integrated liquid hydrogen production technology with cascade separation and waste heatamp;cooling energy utilization 1.00
A novel EMS for FCV combined with condition-adaptive search ranges of decision variables based on the spatial and temporal traffic characteristics 1.00
Optimization study of biomass and HDPE co-gasification-SOFC system based on SSA-BP neural network 1.00
Towards the optimal leverage of dynamic performance and vibrational cost: A novel nonlinear control strategy for thermal management in the fuel-cell system 1.00
Performance analysis of a novel liquid carbon dioxide energy storage system improved by the ejector and the solar energy for combined heat and power 1.00
Dynamic Modeling and Control Strategy of an Organic Rankine Cycle with Concentration Regulation of the Zeotropic Mixture Working Fluid 1.00
Enhanced performance of high-temperature proton exchange membrane fuel cell using mesoporous hollow TiO2@C sphere support 1.00
Genetic algorithm based optimization design and coupling performance analysis of multi-stage series hydrogen turbo-expanders 1.00
Cross-scale dynamic simulation and operational strategy optimization of the compression process in aquifer-based compressed air energy storage systems 1.00
Experimental study on the combined effects of geometric asymmetry and partial reflection wall on the power performance of a wave energy converter 1.00
Research on the energy conversion characteristics of a novel distributed array hydraulic PTO system with wave-adaptive capabilities 1.00
Maximum power point tracking control strategy for built-in direct-drive wave energy converter 0.80
Enhancing wave energy conversion by multi-floating bodies arrayed within near-trapping modes 0.58
Numerical evaluation of thermal performance in an enhanced geothermal system by using impure CO2 as a working fluid 1.00
A novel 3D synergistic harvesting device for wave energy 1.00
How to optimally design industrial high-temperature heat pump for multiple objectives and working conditions? 1.00
Research on Performance Prediction and Parameter Optimization of Combustion Characteristics for Opposed Single Cylinder Free Piston Generator System with Direct Injection Based on BP Neural Network 1.00
Performance evaluation of a novel hybrid open absorption heat pump for efficient flue gas heat recovery at high return water temperatures 0.86
Analysis of the influence of mixed refrigerant pressure on performance of natural gas liquefaction process from a new view of interactions among process parameters 1.00
Flow prediction model for multi-stage labyrinth regulating valve based on supercritical CO2 energy dissipation mechanism 1.00
Dynamic modelling and operation control of a proton exchange membrane fuel cell coupled high temperature heat pump power and steam cogeneration system 0.80
Design, modelling and experimental validation of integrated hydrogen-ammonia-methanol multi-carrier energy conversion for the emerging solid oxide fuel cell with waste heat recovery technology 1.00
Thermoeconomic and Environmental Evaluation of a SOFC-Driven Multigeneration Framework Integrated with Desalination and Electrolysis: Performance Assessment and Multi-Objective Optimization 1.00
Experimental analysis and optimization of combined heating and power driven by hot dry rock based on organic Rankine cycle and vapor compression cycle 1.00
Spray enhanced heat transfer in multi-machine compensable pumped hydro compressed air energy storage system 1.00
Combining exsolution and photothermal chemistry for mid-temperature chemical looping dry reforming of methane 1.00
Modelling of a Two-stage-compression Joule-Thomson Cryocooler using Mixed Refrigerants at 50 K 0.40
Design and theoretical analysis of a high-performance heat-driven thermoacoustic cryocooler for natural gas liquefaction 1.00
Entire elevating temperature processes for green hydrogen coupled coal-to-methanol process: simulation and techno-economic evaluation 1.00
Comprehensive evaluation and optimization of IHX in a modified double-evaporator transcritical CO2 heat pump with ejector 1.00
Design and Thermoeconomic Optimization of a Solid Oxide Fuel Cell-Driven Multigeneration Structure for Integrated Power, Cooling, and Freshwater Production 1.00
Performance and carbon emission study of composite air conditioning systems oriented toward oil-free terminal and refrigerant replacement 1.00
Overall-load Performance and Optimum Operation Strategy of Gas Turbine-Based Combined Cooling and Power Systems Considering Energy Price 1.00
Finite-time thermodynamic modeling, analysis and four-objective optimizations for Rallis cycle with NSGA-II and multiple decision-making methods 1.00
Performance assessment of high temperature heat pump working with different configurations in combination with internal heat exchanger, economizer and subcooler 1.00
Omnidirectional Energy Harvesting Using Sandwich-structure YO-YO Electromagnetic Mechanism in Fluid Environment 0.87
Nonlinear time-domain study of the hydrodynamic performance of a land-based OWC wave energy converter with simplified impulse turbine Modelling 1.00
Enhancing the efficiency of oscillating water column wave energy converters with sawtooth-shaped front walls: An experimental investigation 1.00
Field investigation on the performance of a novel hybrid cooling system for containerized energy storage batteries under mismatched conditions 0.50
Hollow CuO and MXene dual-reinforced MoS2 heterostructures for high energy density supercapacitor negative electrode 0.83
Multi-mode performance assessment of an innovative heat design structure for a geothermal plant using efficient heat recovery, producing power, cooling, hydrogen and freshwater 1.00
GWO-BP hybrid model optimization for a 110 kW proton exchange membrane fuel cell system considering cathode humidity 1.00
An Efficient biogas-assisted Brayton cycle combined with a Trigeneration Plant with Power, Heat, Water, and Methanol Outputs: Design and Multi-Criteria Analysis 1.00
Performance investigation of sCO2 compressors under various splitter length and circumferential positions for advanced power generation 1.00
Quantification of thermal stratification and its impact on energy efficiency in solar hot water storage tanks 1.00
Analysis of a novel gas cycle cooler with large temperature glide for space cooling 1.00
High-voltage bidirectional balancing structure and model predictive control for cell balancing of supercapacitors in heavy duty HEV applications 1.00
Performance evaluation of regenerative cooling and closed Brayton cycle for hypersonic vehicles 1.00
Structural optimization of thermoelectric modules for waste heat recovery from exhaust of solid oxide fuel cells 0.86
Transient real-time 4E analysis for an auto-switching solar-heating TEG/PCM unit 1.00
Leveraging Multi-effect Energy Utilization in a Biomass-Based System for H2 Production and Urban Energy Needs: 4E Analysis and ANN-Based Grey Wolf Optimization 0.10
An Evaluation of the Physicochemical Characteristics and Reactivity in Soot Derived from Heavy Fuel Oil Gasification Processes 1.00
Enhanced Performance Evaluation and Operational Regulation of a Novel Combined Cooling and Power System Using Machine Learning 0.50
Multi-objective optimisation analysis of a supercritical CO2 cycle integrated with an absorption refrigeration and organic Rankine cycle system 1.00
Optimization of two configurations of a two-buoy wave energy converter 0.57
Optimization of the Kalina cycle system 34 (KCS34) based on the addition of a second vapor-liquid separator 1.00
Design and test of an off-grid marine current-powered seawater desalination and hydrogen production system 1.00
Thermo-economic feasibility analysis of a novel integrated energy system based on solar hydrogen production 0.83
Study on Biomass Gasification and Natural Gas Integrated Chemical Looping Combustion Power System 1.00
Comprehensive evaluation of energy, exergy and economic performance of transcritical CO2/R41 air-source heat pump water heater based on entropy weight method 1.00
Experimental study on the performance of an auto-cascade refrigeration system integrating fractional condensation and flash separation 1.00
Enterprise-friendly demand response optimization in modern grid 1.00
Experimental validation and numerical evaluation of a heat-driven direct-coupled Stirling combined cooling and power system 1.00
Exploring the Use of Modified Copper Slag by Copper concentrate in Chemical Chain Gasification: Oxygen Absorption and Release Kinetics 1.00
Process Development and Thermodynamic, Environmental, and Economic Assessments of a Novel Co-Feed Multigeneration Arrangement Using Coke Oven Gas and Geothermal Energy 1.00
Experimental characteristics of thermionic energy converters employing barium-dispenser cathode and semiconductor anodes 1.00
Study on CO2 zeotropic mixture heat pump for waste heat deep recovery - Energy and exergy analysis 1.00
A novel mid-temperature chemical looping system with near-zero carbon emissions for hydrogen and power coproduction 1.00
Evaluation of the combined generation IV nuclear reactor and copper-chlorine cycle for the production of hydrogen and power using thermodynamics 0.83
Load-following operation of supercritical CO2 power cycles under turbine speed control with different shaft configurations 1.00
Multi-objective optimization for a combined heat and power unit with steam ejector at varied boundary: Energy, Economic and Environment (3E) analysis 1.00
Efficiency Analysis of Ocean Compressed Air Energy Storage System under Constant Volume Air Storage Conditions 1.00
Influence of thermophysical properties of working fluids on the performance of a double-stage organic flash cycle with an evaporator and an ejector 1.00
Thermodynamic analysis and evaluation of a sub-ambient synergistic Carnot battery for external waste heat recovery and data-center cooling: A preliminary investigation 1.00
Development of a Sustainable Dual-Stage TEC Refrigerator for Reduced Energy Consumption 0.63
Soot emission reduction via magnetic field coupling with carbon dioxide in diffusion flames 1.00
Phase equilibrium analysis of CO2-N2 and thermodynamic optimization of a novel liquefied carbon capture system based on decarbonized flue gas expansion refrigeration 1.00
Thermoacoustically driven pulse tube cooler for cascade recovery of waste heat 1.00
Thermodynamic analysis of a novel SOFC-based CCHP system integrated supercritical carbon dioxide and organic Rankine cycles for waste heat cascade utilization 1.00
Experimental and validation study on the performance and hydrodynamic modelling of a heave attitude self-sustaining wave energy converter 1.00
Thermodynamic Analysis of a Copper-Based Chemical Looping Combustion System with Integrated Energy Storage for Combined Cooling, Heating, and Power 0.57
Design and Evaluation of an Integrated CCHP System Based on Solar Thermal Supplementary Heating and Off-Peak Electrical Thermal Storage Heating 0.83
A Wave-powered Ocean Robot Integrated with Umbrella-shaped Wave Energy Converter 1.00
Economic and environmental analysis of a new sustainable multi-generation system for power, heating, cooling, freshwater, and hydrogen production 1.00
Heat Extraction Analysis of an Innovative Single-Well Open-Loop Geothermal System Using scCO2 1.00
Novel gas turbine combined cycle inlet air cooling systems integrating proton exchange membrane electrolyzer, LiBr absorption chiller, and solar energy 1.00
Optimizing Waste-to-Energy Conversion of Banana Peel Biomass-based Scheme using Metaheuristic Particle Swarm Optimization (PSO) Algorithm 0.10
Techno-economic evaluation on a new integration of air-cooled coal-fired power plant and dual-pressure organic Rankine cycle for cold-side waste heat recovery 1.00
Theoretical Model and Application Potential of Hybrid Passive Cooling for Power Yield Improvement of Thermoelectric Generators 1.00
A compression-assisted sorption heat transformer for industrial heating application: working pairs and thermodynamics 0.83
The performance degradation mechanism and improving techniques of the last stage of a steam turbine in deep load regulation scenario 1.00
Study on heat transfer enhancement by multiple leaf-like insert in a heating tube under oscillating flow 1.00
Energy-exergy-emergy optimization analysis designed for combined cooling and power systems driven by proton-exchange membrane fuel cell 1.00
Thermodynamic and environmental analysis of the hydrogen and combustible gas production in supercritical water partial oxidation system of coal 1.00
Assessment and optimization of a novel combined heat and power system through an energy nexus approach: Enhancing energy storage and sustainability 1.00
18 16.68
A ternary-dielectric dual-domain triboelectric nanogenerator for high charge density and tail-charge suppression 1.00
A multifunctional natural clay mineral additive for stabilizing Ni-rich layered oxide cathodes 1.00
Intrinsic defect compensation in the space charge region enables cadmium-free kesterite solar cells to achieve 13.9% certified efficiency 0.75
Nanotwin engineering enables exceptional thermal stability in p-type bismuth telluride thermoelectrics 1.00
Metallurgical refractory lining-guided inorganic binder for stable lithium storage in silicon microparticle anodes 1.00
Surface-tension-induced high packing density carbon nanoribbon films with ultrahigh volumetric capacitance 0.83
In situ homogenized fluorination strategy via active prelithiation enabling LiF solid electrolyte interphases for stable silicon anodes 1.00
Unified contact layer design for highly efficient segmented PbTe/Bi2Te3 thermoelectric devices 1.00
Phase-stabilized GeTe with optimized interfaces for high-performance thermoelectric energy conversion 1.00
26.35%-Efficiency and high-bifaciality n-TOPCon solar cells enabled by UV-ps laser-induced selective modification of double-layered SiOx/n+-poly-Si passivating contacts 1.00
Asymmetric cross-orbital coupling in Fe–Mn spinels decouples structural stability and kinetics in sodium-ion storage 0.45
Ultra-high-performance Ag2Se-based flexible thermoelectric generator 1.00
Tailoring a multilayer fine-grained solid electrolyte interphase by pulse electrochemical activation maneuver for stable Si/C anodes 1.00
Revealing the electrochemical-autocatalytic coupling mechanism of Cu-based catalysts for high-potential formaldehyde oxidation 1.00
Screening thermoelectric materials for high-output performance in wearable electronics 1.00
Constructing a built-in electric field across an NiMo/NiMoP heterointerface for efficient and durable seawater electrolysis in anion exchange membrane electrolyzers 0.92
Gas-medium annealing for perovskite solar cells with state-of-the-art energy loss 1.00
Conversion of photovoltaic waste silicon into amorphous silicon nanowire anodes 0.73
1 0.90
Investigating the influence of SiO2 migration on the chemical looping gasification process of lignite - carbide slag for hydrogen-rich syngas 0.90
3 3.00
Optimizing Greenhouse Gas Emission Quantification and Assessing Mitigation Effectiveness in Semiconductor Manufacturing 1.00
Physicochemical Properties and Aging Behavior of Black Carbon across Emission Sources Determined by Char and Soot Subgroups 1.00
Unveiling the Phytotoxicity of Lithium-Ion Battery Cathode Materials and Its Implications for Sustainable Battery Development 1.00
1 0.94
Compact R-X-Y Stage and Dual-Finger Micromanipulator under Inverted Optical Microscope for Microassembly 0.94
16 15.29
Discovery of a Compound near Mg3Sb2 in the Mg–Sb–Ni System: The Crystal Structure, Stability, and Thermoelectric Performance 1.00
Unveiling the Phase Evolution of Quaternary Iron-Group Metal Nitrides through High-Pressure Directed Synthesis 1.00
Symmetry Breaking Induced by H/F Substitution in Molecular Ferroelectrics for Flexible Wearable Sensors 1.00
A Ferroelectric Zinc-Based Complex with Ultraviolet Emission 1.00
GO/PbO2 Composite with Heterostructure for Electrocatalytic Degradation of Ethylene Carbonate in Spent Lithium-Ion Batteries 1.00
Durable Alkaline Seawater Oxidation over Hierarchical NiNH@NiFe LDH Nanoarrays 0.91
Prediction of Thermoelectric Performance in Topological Phonon Compounds MgSnP2 and MgSnAs2 0.92
Durable Ampere-Scale Seawater Electrolysis Driven by Ba-Doped NiFe Layered Double Hydroxide 0.77
Two-Dimensional Cobalt Coordination Polymers Based on Anionic Modulation and Application in Supercapacitors 1.00
Multi-Metal Synergistic Doping Enabling High-Entropy Copper-Based Nanosphere Libraries for Advanced Lithium–Ion Battery Anodes 1.00
Jahn–Teller Distortion Enables Enhanced Piezoelectric Energy Harvesting Properties of a Metal-Pyrazolylborate Complex 1.00
Isomorphism of LiV3O8/NaV3O8 and Its Li+ Transport Behavior 0.83
Spatially Decoupled Active and Sacrificial Sites in Titanium Oxide Nanosheets Promote Durable Natural Seawater Electrolysis 1.00
Electronic Optimization in V-Doped NiS Nanoarrays Enables High-Efficiency Sulfide Oxidation-Assisted Seawater Electrolysis 1.00
Polarization-Driven Control of Dynamically Tunable Solar-to-Hydrogen Conversion and On-Demand Water Splitting in 2D Janus-Ferroelectric Heterojunctions 0.86
Elemental Modulation Inducing Defect Engineering to Enhance Electrochemical Capacitance and Rectification Performance of High-Entropy Oxides 1.00
28 25.50
Performance analysis and life cycle assessment of a carbon capture system integrating solar and methane power generation and cooling in a 1,000 MW ultra-supercritical coal-fired power unit 1.00
Impact of oxygenated biofuels dopant on soot and PAH formation in laminar flames: Experimental and theoretical insights 1.00
An innovative model for cleaner energy separations in a two-phase vortex tube 0.80
Experimental analysis and system design of a novel autothermal moderate-temperature chemical looping hydrogen production process with steam enhancement 1.00
Coal-to-aromatics process with integrated propane dehydrogenation technology: Benefit analysis and life cycle assessment 1.00
Green hydrogen-enhanced coal-based methanol-to-aromatics and olefins (MTA/MTO) system: conceptual design and parallel multi-objective optimization based on entropy-energy-economic (3E) analysis 1.00
Frost-aware performance analysis and optimization of annular thermoelectric generators for liquefied natural gas vaporizers 0.70
Energy, exergy, and economic analyses of a novel carbon dioxide-pumped thermal energy storage system with cooling, heating, and power cogeneration 1.00
Structure-performance synergy in potassium feldspar-modified natural iron ore-based oxygen carriers for chemical looping combustion 1.00
Thermodynamic and economic analysis of aluminum-water reaction systems for power generation and energy storage 1.00
Evaluation of deconvolution methods and loading parameters in nanoindentation characterization of sodium aluminosilicate hydrate gel in fly ash based geopolymers 0.89
Cleaner production of net-negative emissions via integrated Biogas–LNG multigeneration system: 5E analysis, LCA, and artificial intelligence-driven optimization 0.14
Investigation of a novel hybrid-absorber wave energy converter combining linear (Raft-type) and point (Wavestar) absorbers for improved power extraction 0.25
Dynamic response analysis of supercritical CO2 and CO2/Xe mixtures in a straight-channel PCHE based on one-dimensional and three-dimensional models 1.00
Thermodynamic, economic, and environmental analysis of a supercritical water partial oxidation autothermal cogeneration system of coal 1.00
Cascade recovery of extraction steam pressure in combined heat and power systems via vortex tube integration: A thermodynamic, exergoeconomic and environmental analysis 1.00
A numerical study on the multi-physics coupling mechanisms and spatiotemporal evolution of the in-situ coal-to-hydrogen process 1.00
Numerical analysis on energy and exergy performance of cascade electrical-temperature vacuum swing adsorption (C-ETVSA) for direct air capture: A parametric effect study 1.00
Thermodynamic mechanism of metallurgical-grade silicon preparation from silica fume by carbothermal reduction 1.00
Oxidative pyrolysis of biomass waste: Efficient production of humic substances with enhanced agricultural potential and environmental benefits 1.00
Thermochemical energy storage based combined heating and cooling - a new mode of operation 0.83
Experimental study of post-combustion absorption carbon capture assisted by cascade heat pump 1.00
Experimental study of onboard carbon capture pilot plant with a compact integrated stripper under variable parameters 0.89
Energy efficiency improvement of market-dominant air conditioners based on GraPHsep method 1.00
Component-level life cycle carbon emission analysis and multi-objective optimization with power characteristics for an adaptively-coupled solar ejector-compression refrigeration system 1.00
Techno-economic analysis and multi-objective optimization of a low-temperature ammonia reforming based solid oxide fuel cell-gas turbine-organic Rankine cycle hybrid power generation system 1.00
Construction and analysis of a cost effective and low carbon emission route for coal to aromatics production 1.00
Sustainable hydrogen production from coal tar residue via supercritical water gasification 1.00
1 0.71
Morphology and Fractal Dimension of Ambient Soot Particles From Vehicular Emissions in Three Contrasting Urban Tunnels 0.71
36 29.49
Rational Design of Multi-Polyhedral Units-Induced Hybrid Bonding and Quadruple-Valley Band Structure in Ag0.5CdBi4.5Se8 for Enhanced Thermoelectric Performance 1.00
Beyond Kelvin’s Relation: A Giant Transverse Thomson Response for Efficient Cryogenic Cooling 0.22
Cooperative Nanostructuring and Resonant Density-of-States Engineering Enable High-Performance n-Type PbSe Thermoelectrics 0.70
Leveraging Piezoelectric and Ferroelectric Effects to Control Zinc Deposition for High-Performance Solid-State Zinc Batteries 1.00
Mg-Doped Nanosized BaTaO2N with Long-Lived Charge Carriers toward Efficient Overall Water Splitting 0.18
Entropy-Stabilized Diamondoid AgCdInSe3 with Ultralow Thermal Conductivity and High Carrier Mobility for Thermoelectrics 1.00
Spatially Quantitative Profiling of Defect Density for Hydrogen-Induced Passivation Mechanism of Metal–Insulator–Semiconductor Photoanodes 1.00
Defect-Energy-Targeted Lattice Repair Delivers High Thermoelectric Performance in Magnesium Antimonide 0.86
Dual-Antisite Defects and Domain Structures Synergistically Boosting a Record-High ZT > 2.0 in Chalcopyrite Cu0.7Ag0.3Ga1–xInxTe2(x = 0–0.5) 1.00
From Interphase to Interface: Revealing the Dynamic Evolution of Interfacial Electrolyte Configuration and Solid Electrolyte Interphase on Lithium Metal Anode at Elevated Temperature 1.00
Microstructure-Mediated Electron Transfer Dominates the Photoconversion of NO2 to HONO on Soot 1.00
Two-Lever Design Rule for High-Entropy Oxide Oxygen Carriers: Minimize Spin Polarization, Maximize Fe–O–Ni Covalency 0.67
Constructing Functional Lithium-Ion Transport Interfaces by In-Situ Growth and Transformation on Chemical Vapor Deposition-Derived Silicon–Carbon Anode Materials 1.00
Multidentate Coordination Chemistry Enables Adaptive Ionic Cross-Linking of Conductive Binder for Reversible Silicon Anodes 1.00
Gradient-Interlocked Solid Electrolyte Interphase via Spatial Reconfiguration for Stable Silicon Anodes in Solid-State Batteries 1.00
Fe-Based Polyanionic Solid-Solution Phases as High-Power and Low-Temperature Cathodes for Sodium-Ion Batteries 0.33
Enhanced Thermopower in Single-Fullerene Junctions via Interface Engineering 1.00
Triple-Conduction-Band Activation Enables High Out-of-Plane Thermoelectric Efficiency in n-type SnS Crystals 1.00
Large Piezoelectricity in a Dynamic Metal–Organic Framework With Negative Linear Compressibility 1.00
Mechanistic Insights into Enhanced Capacity and Pure-Phase Formation in Fe-Based Mixed Phosphate Cathodes 0.97
Synergistic Optimization of Electronic and Thermal Properties in Single-Stage GeTe Thermoelectric Devices 0.67
Controlled Synthesis of Ultralow-Defect Poly(vinylidene fluoride) via Organocatalyzed Low-Temperature Polymerization 1.00
Establishing the Field-Flow Competition Model to Decipher the Nonmonotonic Interfacial Li+ Dynamic Process for Stabilizing the High-Voltage Cathode–Electrolyte Interface 1.00
Boosting Thermoelectric Properties of High-Entropy Chalcogenides through Local Structural Distortion and Tailored Chemical Bonding 0.92
Deformable, Crack-free, and Low-Cost NaFeCl4 Cathode with Highly Structural Reversibility for Stable All-Solid-State Sodium Batteries 1.00
Coordination-Driven Assembly Modulates the Piezoelectric Response of Bio-Inspired Amino Acid-Based Supramolecular Materials 1.00
Chemical Bond Engineering in Charge-Balanced Layered TiSe2 Derivatives: 3D Charge Transport and Lattice Anharmonicity for Exceptional Thermoelectric Performance 1.00
Liquid–Solid Interface Reactions Drive Enhanced Thermoelectric Performance in Ag2Se 0.21
Unveiling the Angstrom-Scale Interfacial Electron Spillover through the Metal/Electrolyte Interface 0.84
Symmetry-Breaking Amplifies Lone Pair Expression and Orbital Splitting for Promising Chain-Like Thermoelectrics 1.00
Interplay Between Lone Pair Stereochemical Activity and Structural Anisotropy Drives Ultralow Thermal Conductivity in Layered AGeS3 (A = Pb, Sn) Metal Sulfides 0.18
Corrosion-Resistant MoOsub3/sub/Fesub2/subOsub3/sub/MoSsub2/sub Heterojunctions Stabilize OHsup–/sup Adsorption for Efficient Light-Assisted Seawater Electrooxidation 0.64
Regular Mesoporous Superparticles with a Tailored Opening Window and Tunable Surface Crisscrossed Grooves 1.00
Atomic-Scale Dynamics of Five-Fold Twin Mediated Coalescence: Pathway-Dependent and Defect-Governed Nonclassical Growth Mechanisms 0.42
High-Efficiency Organic Mechanophosphorescence from A Phenoselenazine Phosphor for Multiple Applications 1.00
Intrinsic Off-Centering and Light Conduction Band Structure Lead to High Thermoelectric Performance in N-Type Diamondoid AgInSe2 0.68
10 9.53
Interphase-Driven Suppression of Thermal Conductivity in Multilayered Thermoelectric Polymer Heterojunctions 1.00
Manipulation Coupling Fields of Shear Flow, Pressure, and Temperature for Polymorphism Structuring in Poly(vinylidene fluoride) Films 1.00
Local Density Field as a Physical Order Parameter for Conductivity Prediction in Block Copolymer/Carbon Nanotube Nanocomposites via a Voxel-Based Graph Attention Network 0.89
Structural Manipulation of the Oriented Amorphous Fraction to Improve the Piezoelectricity of Poly(vinylidene fluoride-co-trifluoroethylene) by Thermal Annealing 1.00
Three-Dimensional Analysis of Structural Defects in Block Copolymer-Assembled Body-Centered Cubic Spherical Packing 1.00
A Critical Temperature–Pressure Window for Attaining a Giant Piezoelectric Voltage Coefficient in Poly(vinylidene fluoride) 0.81
Enhanced Piezoelectricity in Stretched Relaxor Ferroelectric Polymers Near the Morphotropic Phase Boundary 1.00
Grain-Size Engineering Unlocks Curie Transition Dynamics in P(VDF-TrFE) 1.00
A Lamella Chirality-Induced Heterostructure Crystal in Biodegradable Poly(lactic Acid) Reminiscent of a Morphotropic Phase Boundary 1.00
Improved Electromechanical Performance of Dielectric Elastomers via Constructing an All-Organic Composite Structure 0.83
32 29.70
Additive-Specific SEI Nanostructures on Silicon Anodes Revealed by Cryo-TEM and EELS under Suppressed Bulk Alloying 1.00
Piezoelectric Elastomer with High Voltage Output Enhanced by Molecular Ferroelectric 1.00
2.5 V High-Energy Aqueous Lithium-Ion Hybrid Capacitors Using a Sodium Titanate Intercalation Anode and a Pseudocapacitive Manganese Dioxide Cathode 1.00
Magnetic-Order-Mediated Second Harmonic Generation in a Room-Temperature van der Waals Ferromagnet Fe3GaTe2 0.90
High-Entropy Telluride as Multifunctional Host Material with Synergistic Conversion-Alloying Chemistry of Dendrite-Free Sodium Metal Anode for Quasi-Solid-State Batteries 0.88
Achieving Crystal-to-Amorphous Transition without Phase Collapse in a Stable Gd-Based High-Entropy Perovskite Anode 1.00
Additively Manufactured Micro-/Multi-Scale Porous Copper: Enhanced Mass Transport for High-Performance Hydrogen Evolution 1.00
HAXPES-Guided Buried Interface Engineering Enables Low-Onset-Potential Ta3N5 Photoanodes 1.00
In Situ Formation of a Honeycomb-Like Dual-Amorphous Oxide Tribolayer via Tungsten Segregation for Exceptional Cryogenic Wear Resistance in a NbMoTaW Film 1.00
Ball-Milling-Assisted Magnesiothermic Reduction of Clay Minerals to Nano-Si as High-Performance Lithium-Ion Battery Anodes 1.00
Symmetry Relation in Ultrafast Decay Processes of Single-Crystal Pt 1.00
Laser Shock Dislocation Proliferation Drives Enhanced Thermoelectric Performance in Ag2Se 1.00
Microstructural Engineering of Poly(vinylidene fluoride) Nanofibers Enables Superior Piezoelectric Nanogenerators for Motion Monitoring 1.00
Pushing the Thermal Conductivity Limit by Decoupling Dual-Channel Phonon Transport in Crystals 1.00
Decoding the Intrinsic Link Between Interphase Stripping and Low Initial Coulombic Efficiency of Silicon Anodes in Li-Ion Batteries 1.00
Work-Function-Engineered TiN/N-Doped Carbon Heterostructure for Accelerating Lithium-Ion Transport in Micron-Sized SiO Anodes 1.00
Stress-Dissipating Cocontinuous Carbon–Silicon Microparticles for High-Energy Lithium-Ion Batteries with Low Expansions 1.00
Elucidating the Effects of LiF on Lithium Metal Anodes 0.02
Flexible Electrocaloric Polymer Stack Driven by One AA Battery for Highly Efficient Personalized Thermoregulation 1.00
Giant Electrocaloric Cooling via Vertically Aligned BCZT Nanoarrays in Relaxor Polymer Nanocomposites for Low-Field Solid-State Refrigeration 1.00
Enhanced Thermopower by Asymmetric Doping of Sodium Chloride in Ionogels 1.00
Transition of Microscale Tribological Regimes from Severe Plastic Deformation to Lubricant Precipitation with Rising Temperatures 1.00
The Last Dance of Lubrication: Capturing Ultralow Friction before Full Evaporation 0.50
Rigid and Flexible Component Combined Si@g-C3N4/C: A Synergistic Strategy for Constructing Robust Structure to Enhance the Cyclic Stability of the Silicon Anodes 0.78
Biocompatible Piezoelectric Elastomer for Self-Powered Electronics 1.00
Unlocking Superlubricity: Ionic Liquids Meet Perfluorocarbons 1.00
Multiscale Microstructures and Carrier–Phonon Decoupling in BiCuSeO-CDs Composites 1.00
Improving Electron and Ion Transport in Nano-Si Anodes through Integration with Conductive Nano-Metal–Organic Frameworks 0.83
Polymer Coating Enabling a Durable Conductive Network for Si-Based Lithium-Ion Batteries 1.00
Strain Soliton Activated Gliding for Length Invariant Friction 0.80
A Bifunctional Bis(trimethylsilyl) Sulfate Additive Improved the Inorganic-Rich Solid Electrolyte Interphase for Lithium Metal Batteries 1.00
Tuning TM-O Bond Covalency to Boost Cationic Activity and Reversibility of Na4Fe1.5Mn1.5(PO4)2P2O7 1.00
2 1.90
Dual-symmetry-guided assembly of complex lattices 0.90
Silicon solar cells with hybrid back contacts 1.00
87 74.90
Sustainable continuous seawater electrolysis using atomic interface catalyst via liquid-medium strategy 1.00
Multilayer-induced stress manipulation for superior piezoelectric performance and temperature stability in lead-free piezoceramics 0.92
Beyond MPB engineering: enhanced piezoelectricity and thermal stability assisted by high-entropy design 0.13
Cation-inhibitor and metal–support synergy for efficient and durable hydrogen evolution in natural seawater 0.88
Engineered local polarization disorder unlocks record efficiency in antiferroelectric capacitors 1.00
Supramolecular engineering of amyloid-inspired tripeptide assemblies enabling tunable piezoelectricity 1.00
Dual-function surface engineering for enhancing anode stability in alkaline seawater oxidation 0.95
Thermal-stress enhanced pyroelectricity in piezoelectric bimorphs 0.33
Electronic band and core-shell structure engineering enables ultrahigh energy storage in high-entropy ceramics 0.92
Strain-enhanced stretchable molecular ferroelectric acoustic fibers 1.00
Unveiling the synergistic mechanism of C-F and C-Cl bonds in enhancing the triboelectric performance of fluorinated polymers 1.00
Ultrahigh energy-storage in lead-free ceramic capacitors via local structure design 1.00
Oriented diffusion tailors interfacial strain-polarization coupling for broadband electromagnetic absorption 1.00
Chemical bonding manipulation unlocks high performance ionic-bonded thermoelectrics 1.00
Antimony oxide buffer layer for single- and double-junction perovskite-based solar cells 0.92
Increasing fatigue resistance in ordered intermetallic alloys with multi-element symbiosis 0.94
High-accuracy fatigue life prediction and early fracture warning for ferromagnetic metals via spin correlation amplification 1.00
Giant ZT enhancement in rhombohedral GeTe-based thermoelectric materials 0.75
Passivating pinholes for large-area and high-efficiency silicon solar cells with tunnel oxide passivated contact 0.96
Textured piezoelectric ceramics with reduced grain size for high-frequency transducer applications 1.00
Large piezoelectricity in crosslinked ferroelectric polymers 1.00
Giant photostriction rate for remote opto-ultrasonic structural health monitoring 0.79
A new highly oxygen-deficient and cubic PrZrO for intermediate-temperature thermochemical production of oxygen and hydrogen 0.18
Redefining catalyst reconstruction and Cl--repulsion correlation to delineate a dynamic protective skeleton for seawater splitting 1.00
Observation of a backward sliding motion for rollers on surfaces in viscoelastic fluid 1.00
Room-temperature plasticity in Ag2Te induced by Ag ions hopping 1.00
An all-in-one AgSe-based flexible solar-thermoelectric generator with photothermal integration 1.00
Nanotwin architecture and ultra-high valley degeneracy lead to high thermoelectric performance in GeTe-based thermoelectric materials 1.00
Modulating thermo-diffusion/galvanic coupling via ion speciation engineering enables high-performance ionic thermoelectric cells 0.79
Facet-modulated ferroelectric polymers 1.00
Explainable mechanism for production process anomalies based on digital twin 0.94
Unlocking limited electric double-layer capacity via electrochemically-driven continuous partial desolvations in carbon nanopores 1.00
Field-effect passivation for minimized voltage loss in highly efficient antimony selenosulfide solar cells 1.00
Surface halogenation engineering for reversible silicon-based solid-state batteries 1.00
Thermomechanical pressing and immediate quenching: enhanced piezoelectricity and transparency in piezoelectric nanofibers 0.92
Accelerated discovery of crystalline materials with record ultralow lattice thermal conductivity via a universal descriptor 0.21
From negligible to giant electrocaloric effect of poly(vinylidene fluoride) 0.88
Flash annealing boosts piezoelectricity of PVDF-TrFE 1.00
Substrate-adaptive sacrificial corrosion strategy enables 700 mV oxygen evolution window for enhanced seawater electrolysis 0.90
Vacancy-ordered perovskite superlattice in cerium titanate negative electrode for enhanced lithium-ion storage 1.00
Ultrahigh current output performance in piezoelectric energy harvesters enabled by phase boundary–bandgap synergistic engineering 1.00
Tailoring precipitates for enhanced hydrogen trapping in aluminum alloys 0.62
Design of hierarchical-heterostructure antiferroelectrics for ultrahigh capacitive energy storage 0.86
Oxygen nanoclustering evades inverse Hall-Petch softening 0.75
Enhanced Lattice Symmetry via Mn Doping Boosts Electrical Transport Performance in Rhombohedral GeSe Thermoelectric Materials 1.00
A triple-defense electrocatalyst for robust seawater oxidation 1.00
A layered Prussian blue analogue as fast-charging negative electrode material for lithium-ion batteries 0.80
The hydrogen-to-carbon mole perspective reveals cleanness and inequality of global and national fossil fuel transition 1.00
Three-dimensional network of multi-fold twins enabled by geometrically necessary amorphous zones 1.00
Stabilization of high-performance rock-salt LiMnSbTe3 thermoelectrics with embedded van der Waals-like gaps 0.25
Alignment of edge dislocations – the reason lying behind composition inhomogeneity induced low thermal conductivity 0.27
High-power performance enhancement in PZT-based piezoceramics via hot-pressing 0.97
27%-efficiency silicon heterojunction cell with 98.6% cell-to-module ratio driving new momentum towards the 29.4% limit 1.00
Intrinsic ferroelectric elastomers with ultrahigh Curie temperature and fast polarization switching 1.00
Self-powered near-infrared mechanoluminescence through MgO/MgF2 piezo-photonic heterojunctions 1.00
Multiscale-engineered ferroelectric ceramics exhibiting superior electrocaloric performance 1.00
Scalable solution-processed ferroelectric polymers exhibiting markedly enhanced piezoelectricity 1.00
Schottky engineering of GDYO@Pt to boost piezoelectric and oxidative stress modulation for accelerated cranial regeneration 1.00
Revisiting Pt foil catalysts for formamide electrosynthesis achieved at industrial-level current densities 0.97
Strong crystalline thermal insulation induced by extended antibonding states 0.50
Anomalous photoelectrochemical etching of undoped semiconductor surfaces 1.00
Miniaturized MgBi-based thermoelectric cooler for localized electronic thermal management 1.00
Ultrahigh thermoelectricity obtained in classical BiSbTe alloy processed under super-gravity 1.00
Microstructural transformation for robust and high-efficiency Zintl thermoelectrics 0.38
Flexible AgSe-based thin-film thermoelectrics for sustainable energy harvesting and cooling 0.07
Boosting carrier mobility in MgAgSb via in-situ InSb nanoprecipitates for high-efficiency segmented thermoelectric module 1.00
Fluctuating local polarization: a generic fingerprint for enhanced piezoelectricity in Pb-based and Pb-free perovskite ferroelectrics 0.55
Copper ion diffusion by solid solution treatment advancing GeTe-based thermoelectrics 0.04
High strength and plasticity in disordered multilayer graphene reinforced copper composites 1.00
Electrically modulated photothermal force microscopy for revealing molecular conformation changes during polarization switching at the nanoscale 1.00
Advanced stability and energy storage capacity in hierarchically engineered BiNaTiO-based multilayer capacitors 0.93
High-performance ZrNiSn-based half-Heusler thermoelectrics with hierarchical architectures enabled by reactive sintering 0.23
Ultra-soft organic combined film with piezoelectricity induced by liquid-liquid interface polar engineering 1.00
Strain-driven lone pair electron expression for thermal transport in BiCuSeO 1.00
Conduction band convergence and local structure distortion for superior thermoelectric performance of GaSb-doped n-type PbSe thermoelectrics 0.60
Engineering relaxors by embedding ultra-weak polar regions for superior energy storage 1.00
Local heterogeneous dipolar structures drive gigantic capacitive energy storage in antiferroelectric ceramics 1.00
Engineered PW12-polyoxometalate docked Fe sites on CoFe hydroxide anode for durable seawater electrolysis 1.00
Nanotwinned CrN ceramics with enhanced plasticity 1.00
Flexible high-entropy functional ceramics 0.98
Coherent Ag-rich nanoprecipitates/β-Ag2Se flexible film with unprecedented thermoelectric performance by liquid-like sin 0.86
Plasticity of BiTe-family thermoelectric crystals 1.00
Hexafluorophosphate additive enables durable seawater oxidation at ampere-level current density 1.00
Sieving pore design enables stable and fast alloying chemistry of silicon negative electrodes in Li-ion batteries 1.00
Tuning friction force and reducing wear by applying alternating electric current in conductive AFM experiments 1.00
Ultrafast dynamics of electronic friction energy dissipation in defective semiconductor monolayer 1.00
Stoichiometry-engineered phase transition in a two-dimensional binary compound 1.00
5 4.90
Sorption-driven dissolution refrigeration cycle with thermal storage 1.00
Dual-side electrical refinement enables efficient industrial tunnel oxide passivating contact silicon solar cells 1.00
Illumination-assisted annealing enables selenium solar cells with open-circuit voltage over 1 V and efficiency exceeding 10% 0.90
Vacancy-enhanced cation ordering via magnesium doping to enable kesterite solar cells with 14.9% certified efficiency 1.00
Carrier management through electrode and electron-selective layer engineering for 10.70% efficiency antimony selenosulfide solar cells 1.00
3 1.38
Non-monotonic magnetic friction from collective rotor dynamics 0.17
Large linear high-frequency strain by interlocked monoclinic polar nanoregions 0.83
Streaming flexoelectricity in saline ice 0.39
1 0.06
Unravelling electro-chemo-mechanical processes in graphite/silicon composites for designing nanoporous and microstructured battery electrodes 0.06
1 0.39
Flexoelectricity and surface ferroelectricity of water ice 0.39
1 0.13
Electrolysis with built-in seawater desalination by porous-solid-electrolyte reactor 0.13
5 4.75
Bulk and nanoflake transport properties in the van der Waals heavy-fermion metal CeSiI 1.00
Incorporating Gibbs free energy into interatomic potential fitting 1.00
Time-resolved measurement of Seebeck effect for superionic metals during a structural phase transition 1.00
Revisiting the mechanisms of thermal transport in vacancy-defective silicon 0.75
Prediction of extremely high thermal conductivity in a layered oxide near instability 1.00
9 6.88
Engineering Long-Range and Multibody Interactions via Global Kinetic Constraints 0.75
Interplay of Cohesive, Griffith, and Geometric Scales in the Nucleation of Friction 0.25
Observation of Robust Macroscale Structural Superlubricity 0.83
Ionic Thermoelectric Effect within the Framework of Thermoelectricity 1.00
Transfer of Active Motion from Medium to Probe via the Induced Friction and Noise 0.25
Giant Reversible Piezoelectricity from Symmetry-Governed Stochastic Dipole Hopping 1.00
Role of Stiffness in Friction with Graphite 0.80
Design of Frictionless Interfaces for Moiré Layers 1.00
Universal Theoretical Elucidation of Electrobending Deformation in Piezoelectrics 1.00
5 4.75
Subsurface Driven Size-Dependent Elasticity in Nanodiamond 0.85
Boosting the Thermoelectric Performance of 𝛼-MgAgSb through Phase-Transition-Induced Self-Doping 1.00
On-Device Control of Electronic Friction 0.90
Atomic-Scale Chemical Inhomogeneity as a Determinant of Thermoelectric Transport in Bi2⁢Te3-Based Materials 1.00
Lattice Vibrational Hierarchy and Mean-Free-Path Filtering in Bi6⁢Cu2⁢Se4⁢O6 Superlattice Thermoelectrics 1.00
3 2.00
A structural disorder function linking local symmetry breaking to plastic indicators and strength in amorphous solids 1.00
The role of fluctuations in the nucleation process 0.50
Lattice distortion leads to glassy thermal transport in crystalline Cs3Bi2I6Cl3 0.50
4 3.93
Irregular hierarchical-porous polymer for high-performance soft thermoelectrics 1.00
Gigantic piezoelectricity in a polycrystalline ceramic actively maintained at a quadruple point 0.93
Extending the temperature range of the Cmcm phase of SnSe for high thermoelectric performance 1.00
Strengthening Ni alloys with nanoscale interfaces of negative excess energy 1.00
14 13.10
Electronic-phononic decoupling and Fermi-level tuning enable high thermoelectric performance in Ag8SnSe6 0.69
Nanoscale coherent chemical fluctuations driving superior thermoelectric performance in vacancy-tailored ductile AgCu(S,Se,Te) 1.00
Uncovering piezoelectric effect in polycrystalline diamond membranes 1.00
Reduced multiplicity of crystallographic sites for superior thermoelectric performance of cubic Cu6GeTeS4 via chemical tailoring 1.00
Thickness-confined metastable phase transitions drive large piezoelectricity in ultrathin BiFeO3 1.00
Photoinduced femtosecond spin-flip assisted by a single-mode linear phonon 1.00
Negative-thermal-expansion particles enable high-performance and ultradurable thermoelectric modules 0.82
High-performance n-type flexible inorganic thermoelectric aerogel for energy harvesting 1.00
Forced bond ionization–driven design of ultralow lattice thermal conductivity materials for flexible thermoelectrics 1.00
Frictional strength regulated by roughness alignment 1.00
Homo-layer flexible Bi2Te3-based films with high thermoelectric performance 0.85
Topological bubble domain engineering for high strain response 0.89
Bioinspired supramolecular fibrillization enables stretchable and biodegradable piezoelectric bioelectronics 0.89
Ultralow-pressure mechanical-motion switching of ferroelectric polarization 0.96
1 1.00
Quantifying the potential uncertainty and development suitability of sandstone porous geothermal reservoirs for urban heating in northwestern Shandong plain, China 1.00
16 15.77
Interfacial Density-of-States Engineering Enables Transport Mechanism Transition in P3HT/Nitrogen-Doped Graphene Thermoelectric Composites 1.00
Simultaneous Surface and Interlayer Engineering of NiFe LDH via a Facile Anionic Surfactant Incorporation for Stable Ampere-Level Seawater Oxidation 0.92
Polarity and Interfacial Charge Transfer at Janus SnSSe/MoSi2N4 Heterojunctions: A Nonadiabatic Molecular Dynamics Study 0.86
Control of Defect-Mediated Charge Recombination in Kesterite Absorbers through Oxygen–Sodium Interplay 1.00
Self-Supporting FeOOH/NiFe-LDH Heterostructures with a Built-In Electric Field for Efficient and Durable Alkaline Seawater Oxidation 1.00
Orthogonal Magnon-Phonon Coupling Enables Information Encoding in Bulk CrSBr 1.00
In Situ NMR Investigations of Impacts of Electrolyte Additives on Lithium Metal Cycling in Anode-Free Lithium Metal Batteries 1.00
Simultaneous Transition of Temperature Coefficient and p-n in Carbon Nanotube Thermoelectric Composites 1.00
Beyond Redox Additives: Accelerating Charge Transfer in Aqueous Energy Storage with Supporting Electrolytes 1.00
Chemical Pressure Induced Efficient Carrier Concentration Optimization for High Thermoelectric Performance in SmS 1.00
A Long-Lasting Rechargeable Seawater Zn–Air Battery Enabled by Vacancy-Driven Co3O4–MoS2 Bifunctional Cathodes 1.00
Revisiting High-Frequency Impedance in Li-Ion Batteries: Decoupling Solid Electrolyte Interphase Resistance from Pore Impedance 1.00
Simulated Atomistic Growth of Amorphous Monolayer Carbon 1.00
Direct Observation of Orbital Hybridization Evolution in BAs 1.00
Phonon Scattering and Thermal Transport in PbSe and Medium Entropy Thermoelectric PbSesub0.5/subTesub0.25/subSsub0.25/sub with Defects of Different Dimensions 1.00
Janus Effect of Phonons in Inducing Diffusons in Nanolayered XMg2Bi2 (X = Sr, Ba): Static–Dynamic Transition for Cations 1.00
3 2.58
Charge allocation and mass transfer efficiency during hydrogen evolution reaction in high salinity neutral electrolyte 1.00
Green Valorization of Digested Sludge-Derived Humic Acid: SMSI-Driven Cu/N Co-Doped Hierarchical Porous Carbon Materials for High-Performance Supercapacitors 1.00
Bubble-Triggered Piezocatalytic Generation of Hydrogen Peroxide by Copper Nanosheets-Modified Polyvinylidene Fluoride Films for Organic Pollutant Degradation and Water Disinfection 0.58

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.