Electrical Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 2557

Article ‘Count’ for Electrical Engineering.

Journal Count Share
69 61.71
In Situ Lithiated Anti-Perovskite Nitride-Mediated Li-Ion Redistribution Enabling Fast-Charging Graphite Anodes 1.00
Selective Facet Growth and Surface Reconstruction Achieving Structure-Robust High-Voltage LiCoO2 0.81
Quenching-Induced Spinel/Disorder Heterostructure for Stabilized Li-Rich Cathodes 0.91
Covalent Boron–Oxygen Bond Stabilizes Anion Redox for Lithium-Rich Manganese-Based Layered Oxide Cathodes 1.00
Beyond the Surface: Three-Dimensional Distribution and Defect Passivation of Self-Assembled Monolayers in Perovskite Solar Cells 0.14
Constructing Charge Transfer Pathways via π-Conjugation Modulation for Long-Cycling Mg–S Batteries 1.00
Dynamic Covalent Chemistry Eliminates Structural Distortion of Na4MnV(PO4)3: Unlocking Ultrafast and Durable Multielectron Redox in Sodium-Ion Batteries 1.00
Achieving High-Voltage Sodium–Ion Batteries with Phase-Transition-Free High-Entropy Oxide Cathodes via Altering Local Coordination Fields 0.94
Asymmetrically Coordinated Single-Atom Ni Catalysts on Curved Supports for Efficient Sodium–Sulfur Batteries 1.00
Faster and Deeper Mg2+ Penetration Cathodes Unlock High Capacity in Low-Temperature Magnesium-Metal Batteries 1.00
High Configurational Entropy Engineered Hollow Microspheres Layered Mn-Based Cathode Enabling Stress Self-Dissipation and Anionic Redox for Wide-Temperature-Workability Sodium-Ion Batteries 0.88
Bulk-Interface Synergy Enables Stable High-Voltage P2-Type Layered Oxide Cathodes for Fast-Charging Sodium-Ion Batteries 0.75
Dead Sodium Suppression Enabled by Sodiophilic Alloy-Seeded Carbon Scaffolds for Stable Sodium Metal Batteries 1.00
Cation-Tuned Reaction Mechanisms in Metal Dicyanamide Anodes for Lithium-Ion Batteries with High Reversible Capacity 0.84
Lattice Reordering from High-Valence Mo Segregation for High-Nickel Cobalt-Free Cathodes 0.32
Subnanometric Pores of the Solid Electrolyte Interphase Layer for Sodium-Ion Batteries 1.00
Precursor Stabilization Strategies via Vapor–Solid Reaction for Reproducible and High-Efficiency Vapor-Deposited Perovskite Solar Cells 1.00
Unleashing O3-Type Layered Cathode Capacity via Rb-Modulation for Advanced Sodium-Ion Batteries 1.00
Robust LiNi0.6Mn0.4O2 Cathode Achieved from the Dual-Function Strategy of Microstructural Stress Dissipation and Crystalline Phase Ion Transport Improvement 0.89
Reconstructed Perovskite Layers Regulate Surface-Oxygen Dimerization States Enabling Reversible Anionic Redox in Li-Rich Layered Oxides 1.00
Controlling Jahn–Teller Distortion through Mn Slab Localization for Stable High-Voltage Sodium-Ion Batteries 0.19
Epitaxial Growth of FeF2 on FeF3 by Metal–Organic Framework Etching-Fluorination to Stabilize Low-Temperature Li-Fluoride Conversion Batteries 1.00
Machine Learning-Accelerated Development of Li-Rich Layered Oxides with High Reversible Capacity and Coulombic Efficiency 1.00
Taming the Stability of Organic Photovoltaics by Nanoconfinement 1.00
Frank–van der Merwe-Mediated Sequential Thermal Evaporation for Stable FASnI3 Perovskite Solar Cells 0.12
Efficient and Stable FA0.95Cs0.05PbI3 Single-Crystal Perovskite Solar Cells via Hierarchical Elimination of Surface Iodide Vacancies 1.00
Grain Boundary Engineering Enables 22.2%-Efficient Inverted Wide-Bandgap Perovskite Solar Cells in Ambient Air 0.91
Boosting Na+ Storage and Thermal Stability of Na4Fe3(PO4)2P2O7 via High-Entropy Engineering 0.80
Diffusion Channel Engineering of Spinel Cathodes for Selective Lithium Extraction from Low-Grade Brine 1.00
Dual-Gradient 3D Porous Alloy Current Collectors To Guide Ultrauniform Lithium Deposition in Lithium Metal Batteries 1.00
p-Band Center Modulation in High-Performance Cathode and Stable Composite Lithium Anode Enabling Ah-Scale Flexible Li–O2 Batteries 1.00
Coassembled Self-Assembled Monolayers Enable Efficient and Stable Inverted Perovskite Solar Cells 1.00
Curvature-Induced Reversible Li Plating Behavior Enables Extremely Fast-Charging and Long-Lasting Li-Ion Batteries 1.00
Dual Engineering of Electronic and Mechanical Properties via Heterocontact–Curvature Interfaces for Ultra-Stable K-Ion Storage 0.86
Unlocking the Potential of Cobalt-Free Lithium-Ion Cathodes via Lithium-Rich Disorder Domains 0.21
Trace-Cobalt Surface Engineering of Ni-Rich Co-Free Cathodes Unlocks High-Power Density and Long-Cycle Life in Pouch-Type Li-Ion Batteries 1.00
Synergistic Dipole-Defect Engineering via Sulfonic Molecular Bridge Boosts Voltage in Wide-Bandgap Perovskite and All-Perovskite Tandem Solar Cells 1.00
Ionic-Potential-Guided Fluoride Engineering of Reversible Mn-Based Cathodes for Sodium-Ion Batteries 0.63
Regulating the Electric Double Layer via Cellulose Acetate Enabling Stable and Long-Lifetime Sodium Metal Batteries 1.00
Bubble Dynamics: From Single-Bubble Growth to Dual-Bubble Coalescence 1.00
Unveiling the Interlayer–Intralayer Cooperative Diffusion Mechanism in Bimetallic Layered Cathodes for Rechargeable Magnesium Batteries 1.00
Stabilizing Lattice Oxygen via Interfacial B–O Complexing for a 4.6 V LiCoO2 Cathode 1.00
Electrolyte-Driven Cusup4+/sup Substitution in MoSesub2/sub: Synergy of an Inorganic-Rich Solid Electrolyte Interphase and Thermal Activation for Sodium-Ion Batteries 1.00
Structurally Compatible Anion Substitution for the Enhanced NASICON-Na4Mn1.5Fe1.5(PO4)2P2O7 Cathode 1.00
Atomically Asymmetrical Ruthenium–Oxygen–Cobalt Sites Accelerate Oxygen Redox and Suppress Side Reactions for Stable Lithium–Oxygen Batteries 1.00
Unraveling Li Desolvation on Solid Electrolyte Interphase by Ab Initio Metadynamics 1.00
Tailored Crystallization and Defect Control via Acetamide Derivatives for Efficient Tin Perovskite Solar Cells 1.00
Surface-Modified Graphite Anodes for High-Rate Long-Cycling in Sulfide All-Solid-State Batteries 1.00
Achieving Long-Term Cyclability in Sodium-Ion Batteries: Site-Selective Doping to Inhibit Irreversible Phase Transitions in P2-Na2/3Ni1/3Mn2/3O2 Cathode 1.00
Synergistic Dual-Pinning Engineering Enables Stable Mn-Based Layered Oxide Cathodes for High-Performance Sodium-Ion Batteries 1.00
Alleviating the Kinetic Hindrance of Ni-Rich Single-Crystal Cathode Materials Driven by Local Structural Realignment 0.88
Confinement-Induced In Situ Cl–/Cl2 Conversion in a Cathode Enables a Lean Electrolyte Sodium-Chlorine Battery 1.00
Engineering Surface Oxygen Vacancies Buffer Achieving Ultrahigh-Voltage LiCoO2 1.00
High-Entropy Local Microenvironment-Catalyzed Tandem Reaction Achieves Superfast Sodium Storage Anode 1.00
Regulating Na/Mn Antisite Defects and Revitalizing Reversible Redox Reactions in Phosphate Cathodes 1.00
A Weak-Fluorine-Bond Molecule Stabilizes Hard Carbon Anodes for Practical Sodium-Ion Batteries 1.00
Unlocking Photoluminescence in 6,13-Bis(triisopropylsilylethynyl)pentacene: Singlet Fission Mitigation by 2D Material-Controlled Molecular Packing 0.89
Over 26% and 24%-Efficiency Rigid and Flexible Perovskite Photovoltaics through Enhanced Crystallinity and Alleviated Residual Strains 1.00
Stack Pressure-Independent Side-Reaction-Dominant Nanoscale Inactive Mg Loss in Rechargeable Mg Metal Batteries 1.00
Stationary Oxygen Vacancy Construction toward a Superior-Performance Ultrahigh Nickel Single-Crystal Cathode 0.91
Modulating Surface Structural Evolution of LiCoOsub2/sub for Enhanced Extreme Fast-Charging Durability 1.00
Revealing the Correlation between Structural Evolution and Reversible Phase Transition of Single-Crystalline Ni-Rich Cathode 1.00
Constructing Perovskite Phase to Enhance the Electrochemical Performance of a Cobalt-Free, Ultrahigh-Ni Cathode 1.00
Tailoring Local Chemistry of O3-Type Ni/Fe/Mn-Based Layered Oxide Cathodes for High-Performance Sodium-Ion Batteries 0.89
Restraining the Jahn–Teller Distortion in Mn-Based Layered Cathodes toward High-Performance Potassium-Ion Batteries 1.00
Organic Dyes for Interfacial Regulation of Iodine in Metal Halide Perovskite Wide-Bandgap and Tandem Solar Cells 1.00
High-Performance Aprotic Li–COsub2/sub Battery Enabled by the Ru Heterophase Catalyst 0.20
Ni Migration-Induced Strain and Phase Segregation in LiNiO2 Cathodes 0.75
High-Entropy Doping Enabling Ultrahigh Power Density for Advanced Sodium-Ion Batteries 1.00
315 302.25
Metallized Epichlorohydrin Lignocellulose as a Lightweight Sustainable Current Collector for Fast‐Charge Lithium‐Ion Pouch Cells 1.00
Install the Patch to Unlock Novel Na+ Storage Sites for Achieving Ultrahigh-capacity Na3V2(PO4)3 Cathodes 1.00
Exceeding 20.2% Efficiency in Pseudo-Planar Heterojunction Organic Solar Cells Enabled by High-Crystallinity L8-BO-C4-Induced Morphology Optimization 1.00
Oleylamine-Formamidinium Coherent Structure Boosts the Synergistic Enhancement of Efficiency and Stability in Perovskite Solar Cells 1.00
Molecular-Weight-Regulated Aggregation Kinetics Enables Additive-Free Morphology Control for High-Efficiency and Scalable Organic Solar Cells 0.80
Alkali-Ion Intercalation Driven 2D-to-1D Transformation of CdPS3 for Superior Sodium Storage 1.00
Concurrent Perovskite Crystallization and Interface Modulation via Sulfonamides for High-Performance Printable Mesoscopic Perovskite Solar Cells 1.00
Inert Gas-Based Protective Layer Engineering for Stabilizing Nickel-Rich Cathodes at High Voltages 1.00
A Universal Interfacial Dipole Strategy for Defect Suppression in Inverted Perovskite Solar Cells With Tunable Bandgaps 0.11
Active Functional Interface Engineering Boosts Structural Stability for Single-Crystalline Ni-Rich Cathodes 0.80
Interfacial Bonding and Spatial Confined Architecture Enabling Dendrite‐Free Sodium/Potassium Metal Anodes 1.00
Successive Hemispherical Protrusions-Like P-type Tin Oxide Enabling Stable High-Efficiency Sn-Pb Mixed Perovskite Solar Cells 1.00
Molecular Dipole Embedding Strategy Empower Antimony Sulfide Indoor Photovoltaics With Efficiency Over 21% 1.00
Constructing Layered 1D/3D Heterostructure for Efficient and Stable Single‐Crystal Perovskite Photovoltaics 1.00
Suppressing Interlayer Ion Migration With a Tailored Passivator for Highly Air-Stable Perovskite Solar Cells 0.88
Plane Pinning Kinetics Enable Crystallographic Organization in Wide-Bandgap Perovskites for Efficient and Stable All-Perovskite Tandems 0.95
Viologen Enabled Dynamic Interface Passivation for Efficient and Stable Inverted Perovskite Solar Cells 1.00
Fast Ion-Transport and Stable Interface Enabled by a Phthalocyanine Covalent Organic Framework Protective Layer for High-Performance Magnesium Metal Anode 0.92
Suppressing Solvent Co‐Intercalation for Fast and Durable Sodium Storage in Layered Transition Metal Sulfide Cathodes 1.00
Temporal Decoupling of Processing and Passivation: A Latent Passivator Activated by In Situ Hydrolysis for Efficient Perovskite Solar Cells 1.00
KOH‑Modified SnO2 Buried Interfacial Crystallization Engineering for Efficient Flexible Perovskite Solar Cells 1.00
Synergistic Interface Passivation and Hole Transport via Carbazole-Based Molecules Enable Highly Efficient and Stable Perovskite Photovoltaics 1.00
Tailoring Potassium-Ion Occupancy for Stable Manganese Oxide Cathodes of Potassium-Ion Batteries 0.91
Enhancing the Reversibility of Phase Transition and Anionic Redox Chemistry in O3-Type Sodium-Ion Oxide Cathodes via Precise Alkali-Metal Layer Spacing Modulation 0.88
Pharmacophore‐Guided Interfacial Ligands Co‐Optimize Charge Extraction and Heat Dissipation in Semitransparent Perovskite Solar Cells 1.00
A Reduction–Complexation Cascade Stabilizes the Buried NiOx/Perovskite Interface for High-Performance Perovskite Solar Cells 1.00
Controlling Top‐Interface Reconstruction in Perovskite Solar Cells via Molecular Design of Dual‐Functional Ammonium Salts 1.00
Synergistic Engineering of Iron and Oxygen Vacancies Enables Fast Kinetics in Na3.12Fe2.44(P2O7)2 Cathodes for Superior Rate and Ultra-Stable Sodium-Ion Batteries 1.00
Engineering a Conformal and Lossless Interconnect via Ultrathin ITO for High-Efficiency Perovskite/Silicon Tandem Solar Cells 1.00
A Thin Sandwich-Structured Solid Polymer Electrolyte Enabling High-Rate Lithium Metal Batteries 1.00
D‐Isoascorbic Acid Endows Formamidinium Iodide With Robust Storage Stability and Wide‐Bandgap Perovskite With Reduced Phase Segregation 1.00
Deep External Engineering in Layered Cathode for High‐Performance Sodium‐Ion Batteries 0.80
Multi-Step Data-Driven High-Voltage MgMn2O4 with Inorganic-Rich Cathode-Electrolyte Interphase for Stable Mg2+ Storage 1.00
20.5% Efficiency Organic Photovoltaics Enabled by Strong Photo‐Responsive Aromatic‐Diimide Cathode Interlayer 1.00
Dual-SAM Passivation of Quasi-2D Perovskite Film for Efficient Photodetectors 1.00
Multifunctional Pyrene‐Carbazole Integration as Flexible‐Skeletonized Hole Contact for Stable Inverted Perovskite Solar Cells 1.00
Ytterbium Acetylacetonate as Cathode Buffer Layer for Tin‐Based Perovskite Solar Cells 1.00
Cross-Layer Molecular Design for Coherent Interface Passivation in Rigid and Flexible Perovskite Solar Cells 0.73
Unveiling the Chemomechanical Origin of Ultralong Cycling in Sb/C Composite Anodes 1.00
Categorizing The Evolution Routes for Medium‐ and High‐Nickel Layered Oxide Cathodes 1.00
Manganese Phosphide Enables Oxygen Modulation in Co-Free Li-Rich Mn-Based Oxides cathode for Reversible Anionic Redox 1.00
Interfacial Engineering Suppresses Voltage Losses in Fully Solution-Processed, Symmetric Organic Photovoltaics 0.86
Tuning Interfacial Oxygen Chemistry via Na4V2O7 Heterostructures for Synergistic Regulation of Redox Dynamics and Structural Reversibility in Lithium-Rich Manganese Cathodes 1.00
Synergistic Regulation of SnO2/Perovskite Buried Interface by Pyridine Derivative Molecular Bridging for Photovoltaic Performance Optimization 1.00
Suppressing Phase Segregation and Optimizing Interface Carrier Extraction in High‐Efficiency Wide Bandgap Perovskite Solar Cells 1.00
The Application of π-Conjugated Multi-Pyridyl Molecule for Mitigating Dual-Interfacial Deficiencies in Inverted Perovskite Solar Cells 1.00
In Situ Ring‐Opening Polymerization for a Reactive Polymer Interlayer Enables Efficient and Stable Perovskite Solar Cells 1.00
Organic Cationic Pillars Boosting Calcium Storage Kinetics and Structural Stability in Layered MnO2 for Aqueous Calcium-Ion Pouch Cell 1.00
Ionic Liquid-Driven Intermediate Phase Engineering for Surface-Reconstruction of CsPbI2Br Toward High-Efficiency Perovskite/Organic Tandem Solar Cells 1.00
Crystallographic and Stoichiometric Control of ALD-SnO2 Interconnects for Efficient Flexible Perovskite-organic-tandem Photovoltaics 1.00
Polydopamine-Assisted Synergistic Regulation of Surface Chemistry and Pore Architecture in Petroleum Coke-Derived Carbons for High-Power Sodium-Ion Batteries 1.00
Wadsley–Roth Phase Armored Ultra‐Stable Ni‐Rich Cathodes via Synergistic Interfacial Engineering 1.00
Multifunctional Interfacial Passivation via Cooperative Coordination and Hydrogen Bonding for Highly Efficient and Stable Inverted Perovskite Solar Cells 1.00
Ferromagnetic–Electronic Coupling Strategy for Enhancing Operational Stability of Planar Perovskite Solar Cells toward Magnetron Co-Sputtered Iron-Doped Zinc-Tin-Oxide Ferroelectric Electron Transport Layers 0.29
Tridentate Locking Strategy Enables Multi-Dimensional Synergy at Buried Interfaces for High Performance Perovskite Solar Cells 1.00
Regulating Li+ Desolvation Kinetics via Dual-Anion Solvation for High-Rate Lithium Metal Batteries With Fast-Charging Capability 1.00
Unlocking Inert Material to Durable Cathode for Magnesium Storage Inspired via Synergistic Spin-Orbital Reconfiguration and Adaptive Crystal Transformation 1.00
Complementary Dual-Stage Modulation via Ionic-Electrostatic Interactions for Highest Efficiency 2.03 eV Perovskite Device and Triple-Junction Tandems 1.00
Volatile Fluorination Additive for Operationally Stable Perovskite/TOPCon Tandem Solar Cells 1.00
Stabilizing Grain Boundary Grooves in p‐i‐n Perovskite Solar Cells via Dual‐Site Locking Riveting 0.64
Rapid Cooling Enables High Reversibility in Lithium-Rich Cathode via Double-Vacancy Engineering 1.00
A Dynamic Anchoring Molecular Bridge Enables Robust Buried Heterojunction for Stable Perovskite Photovoltaics 1.00
Suppressing Non-Radiative Recombination at Perovskite/C60 Interface With Electron-Deficient π–π Stacking Triazine Polymers for Efficient Inverted Perovskite Solar Cells 0.86
Unlocking the Full Potential of Polydentate Self‐Assembled Molecules in Perovskite Solar Cells: Co‐Deposition Versus Pre‐Deposition 1.00
Cobalt Surface Treatment Induces Tailored Reconstructed Layer to Enhance High‐Voltage Cycling Stability of O3‐Type Layered Oxide Cathodes for Sodium‐Ion Batteries 1.00
Cooperative Self-Assembled Monolayers for Minimizing Voltage Losses in Inverted Perovskite Solar Cells 1.00
Ultraviolet Absorbers Stabilize the Self-Assembled Monolayers and Passivate the Buried Interface for Highly Efficient and Stable Inverted Perovskite Solar Cells 1.00
Reducing Photovoltage Loss in Highly Efficient p–i–n Perovskite Solar Cells via Alkyl Chain Engineering 0.93
Bulk MoS2 Anodes Engineered by Solid-Phase Pre-Sodiation for High-Performance Sodium-Ion Batteries 1.00
Carbonyl-Amine Synergistic Dual-Site Passivation for Efficient and Stable Wide-Bandgap Perovskite Solar Cells 0.92
Four‐Coordinate Boron in Transition Metal Layer Suppresses Lattice Oxygen Evolution for Stable Sodium Layered Cathodes 1.00
Unlocking a Stable, High-Voltage Aqueous Iron-Sulfur Battery by Engineering the Iron Anode with a Preconstructed Polymer-Metal Hybrid Interphase and Decoupling the Electrolyte 1.00
Breaking Kinetic Bottlenecks in Rechargeable Magnesium Batteries: Interfacial Sb Doping for Dual-Function Desolvation and Reconversion in CuS Cathodes 1.00
In Situ Grown Multi‐Functional Siloxane‐Based Organic–Inorganic Hybrid Matrix toward Robust Sulfide‐Lithium Metal Interface for All‐Solid‐State Batteries 1.00
Halogen Bonding Networks Regulate Bromide Crystallization and Stabilize Phase Homogeneity in Efficient All-Perovskite Tandem Solar Cells 1.00
Synergistic Spatial Charge Distribution Enhancing Electron Affinity to Afford High-Efficiency Perovskite Solar Cells 1.00
Multisite‐Functionalized Thiazole Spacer Enables Synergistic Grain‐Boundary Healing and Energy‐Level Alignment for High‐Performance 2D/3D Perovskite Solar Cells 1.00
Heterostructure-Engineered TiO2-TiN Electrocatalyst Boosts Bidirectional Sulfur Redox Kinetics in Magnesium–Sulfur Batteries 0.88
Band-Center Engineering: Soft Sulfur Redox Chemistry Eliminates Oxygen-Induced Instability 0.62
Enolate-Type Zwitterionic Passivator via Spiropyran Isomerization for Hole-Conductor-Free Carbon-Electrode Perovskite Solar Cells 1.00
Tailoring K+/Vacancy Disordered Layered Oxide via Charge Engineering for Stabilizing High-Performance Potassium-Ion Batteries 0.91
Unified Bulk and Interface Control of Tin-Lead Perovskite via a Molecular Bridge for Efficient All-Perovskite Tandem Solar Cells 1.00
EF-Engineering of Mo-Sn-Zn-S Hollow Nanorods for Enhanced Ion/Electron Migration in Sodium-Ion Storage 1.00
Synergistic Passivation via Spatial Configuration Engineering of Ammonium Salts for High‐Efficiency Tandem Perovskite Solar Cells 0.97
Approaching 26% Efficiency in Inverted FAPbI3 Perovskite Solar Cells Enabled by Tailored Fluoropyridine Derivative Additives 0.91
p–p Orbital Coupling Enhanced Exciton Dissociation for High-Performance and Stable FAPbI3 Quantum Dot Solar Cells 1.00
Constructing Stable Heterointerface with Self-Assembled Molecular Bridge for Efficient and Durable Perovskite Solar Cells 1.00
Dynamic Stress-Regulating Molecular Networks Directing Oriented Growth in FAPbI3 Perovskites 1.00
<atl>Robust Protection via In Situ Formation of Lead Sulfate and Defect Suppression for Stable Air‐Fabricated CsPbl sub3/sub Solar Cells</atl> 1.00
Enhancing High-Temperature Electrochemical Performance of Single-Crystal Ultra-High Nickel Cathodes via High-Valence Nb Gradient Doping 1.00
In Situ Sulfidation-Derived NiFe-LDH/Ni3S2 Heterojunction Catalyst Enabling Reversible LiOH Reaction Pathway in High-Performance Li-O2 Batteries 1.00
Synchronous Defect Passivation and Interfacial Dipole Engineering for Efficient and Stable Cesium Copper Iodine Yellow LEDs 1.00
Highly Polar Molecules in Electron Transport Layers Achieve >20% Efficiency and Excellent Scalability in Binary Organic Solar Cells via Enhanced Charge Extraction 1.00
Artificial Amorphous Interface Matters for Boosting High-Voltage Stable LiCoO2 Cathode 0.45
A General Strategy for Electrolyte‐Interphase Reconstruction via Molybdenum‐Driven Catalytic Engineering 1.00
Accelerating Full-Range Ion–Electron Transport in Sodium-Ion Hybrid Capacitors via Lightning-Rod-Inspired Carbon Architecture 0.83
Tailoring Interfacial Energetics and Defect Landscapes with Polar Molecules for High-Efficiency and Stable Perovskite Solar Cells 1.00
Unified Molecular Orientation in Naphthalimide-Based Cathode Interlayers Enables Efficient Large-Area Organic Photovoltaic Modules 1.00
Anion-Governed Microdomains Accelerate Cross-Scale Li+ Transport for Extremely Fast-Charging Lithium-Ion Batteries 1.00
Cooperative Ion Migration Suppression via Multi-Scale Regulation for Enhancing the Performance of Inverted Perovskite Solar Cells 1.00
Transcending Conventional Carbon Nitrides: Three-in-One Multi-Molecular Synergy Engineering in Covalent Heptazine Framework Unlocks Roust High-Rate Sodium-Ion Storage 1.00
Grain Boundary Encapsulation for Efficient Perovskite Solar Cells via PbI2-Derived Low-Dimensional Structure 1.00
Engineering Ultra-Stable Solid Electrolyte Interphase via Strong Crystal Face Coupling for High-Rate Solid Lithium Batteries 1.00
Dipole-Driven Adaptive Solid–Liquid Reaction and Carrier Extraction in Two-Step-Method Halide Perovskite Photovoltaics 1.00
Shear Force Field-Tailored Fibrillar Active Layer Morphology for High-Efficiency Organic Solar Cells 1.00
Intermolecular Coupling Reinforces Self-Assembled Hole-Transport Layers Stability and Performance in NiOx-Based Inverted Perovskite Solar Cells 1.00
Humidity Resistant Air‐Processing of Large Area Perovskite Photovoltaic Modules via Dual Interaction‐Induced Moisture Shielding 0.91
Upcycling Wind Turbine Blade Waste into Hierarchically Porous Silicon–Carbon Anodes for High-Performance Lithium-Ion Batteries 1.00
<atl>Nb‐Doping‐Derived Fe Vacancy Boosting Reversible Reaction Kinetics of Na sub4/sub Fe sub3/sub (PO sub4/sub ) sub2/sub P sub2/sub O sub7/sub Cathode for Enhanced Sodium Storage</atl> 1.00
Achieving Reversible Anionic Redox via Homogeneous Transition Metal-Oxygen Coordination in Li-Rich Layered Oxides 1.00
Adsorption-Competition Engineered Gradient Self-Assembled Interphase for Ultra-Stable Sulfide-Based All-Solid-State Batteries 1.00
Buried Interface Modification Using PEACl for Efficient and Stable Inverted Solar Cells 1.00
Spatially Heterogeneous Oxygen Vacancy Engineering in Olive-Shaped In2Ox for Accelerated Sulfur Redox Kinetics and Long-Life Lithium–Sulfur Batteries 1.00
Hierarchical Garnet-Type Interfacial Engineering Enables Reversible Oxygen Redox in Li-Rich Layered Cathodes 0.75
Active Learning Guided Optimization of Multi-Component Electrolytes for Fast-Charging Lithium-Ion Batteries 1.00
Fluorination-Controlled Crystallization Kinetics in Donor Polymers for 20% Efficiency Organic Solar Cells 1.00
Supramolecular Cavity Confinement Inducing Ordered C60 Assembly and Suppressed Interfacial Non-Radiative Recombination for Efficient and Scalable Perovskite Solar Cells 1.00
Ostwald Ripening–Mediated Grain Coalescence for High‐Quality Blade‐Coated Tin–Lead Perovskites and Tandem Solar Cells 1.00
Anion-Driven d–p Orbital Hybridization in Na3.12Fe2.44(P2O7)2 for High-Performance Sodium-Ion Batteries 1.00
Suppressing Adsorption Disorder of Self‐Assembled Molecules for Efficient Perovskite/Silicon Tandem Solar Cells 1.00
Entropy-Driven Formation of Multi-Site Coupled Network in LiNi0.9Co0.05Mn0.05O2 Cathodes for Long-Cycle Li-Ion Batteries 1.00
Modulating Exciton Delocalization in Organic Solar Cells Through Tailored Local Structures and Dipole Offset of Acceptor 0.81
A Scalable and Low-Temperature Route to Abundant Heteroatoms-Doped Freestanding Carbon Anodes for Fast Sodium-Ion Storage Kinetics 0.95
Tailoring Phase‐Transition Pathways Through Low‐Temperature Topotactic Lithiation to Suppress Structural Defects of Ni‐Rich Co‐Free Cathodes 1.00
Stage‐Resolved Synergy of Tri‐Functional Additive in Perovskite Crystallization for High‐Efficiency Wide‐Bandgap Perovskite and Tandem Solar Cells 1.00
Coordination/π‐π Stacking Synergistic Strategy: Regulating Interface Defects and Charge Transport to Enhance the Performance of Tin‐Lead Perovskite Solar Cells 1.00
Fibrillar Morphology Realized by Regulating Self-Aggregation and Crystallization Kinetics from Non-Volatile Solid Additives for Efficient Polymer Solar Cells 1.00
Dual-Coordinated Additive Ameliorates Crystallization Kinetics and Charge Transport of Tin Halide Perovskite Solar Cells 1.00
Improved Heterointerface Contact for Wide‐Bandgap and Tandem Perovskite Solar Cells 1.00
Tailoring Molecular Orientation with a Polymer Additive Enables Bilayer Organic Solar Cells with 20.2% Efficiency 0.83
Thermal Decomposition Mechanisms and Inherent Stability Differences Between O2- and O3-Lithium-Rich Manganese-Based Oxide Cathodes 1.00
Reverse-Bias Breakdown Mechanisms and Mitigation Strategies in Perovskite Cells and Tandems 1.00
Upcycling Spent Ni-Rich Cathodes via Interfacial Interlocking and Bonding for Prolonged Cycling 1.00
Bulk/Interfacial-Mediated Dynamic Phase Stabilization Restricting Mn Dissolution in 5 V-Class LiNi0.5Mn1.5O4 Cathodes at 45 °C 1.00
Homogenized Phosphonate-Functionalized Fullerenes for Enhanced Electron Extraction in Perovskite Solar Cells 1.00
All-Vapor-Deposited FACs-Perovskite Solar Modules with Power Conversion Efficiency of >19% 0.89
Unprecedented Matrix‐Induced Emission Enhancement Enables Bright and Efficient Carbon Quantum Dot‐Based Electroluminescent Light‐Emitting Diodes 1.00
Na+-Gradient Spatial Functionalization Enhances Structural Stability of Ultrahigh-Ni Layered Cathodes 1.00
Interface Engineering Endowing High Reversibility of SPAN Cathode and Mg Metal Anode for Mg‐SPAN Batteries 1.00
Coherent Interface Growth of PCuAg‐Si Anode for Long‐Term Cycling Stability in All‐Solid‐State Batteries 1.00
Spin-Coating Free Fabrication of α-FAPbI3-Based Efficient Inverted Perovskite Solar Cells via Mixed Self-Assembled Molecules 1.00
From Carrier Generation to Collection: Unraveling the Origin of Composition Tolerance Differences in Polymer/NFA and All-Polymer Solar Cells 1.00
Steric-Complementary Synergistic Strategy for High-Efficiency Monolithic Perovskite/Silicon Tandem Solar Cells 1.00
Sodiophilicity and Sodium Metal Affinity Engineering Enable Stable Sodium Metal Anodes 1.00
Iodine Weakened Phosphorus-Sodium Interaction Enables Near-Complete Reversible Sodium-Ion Storage 1.00
Enabling Extreme Fast‐Charging Lithium‐Sulfur Batteries via Interfacial Electric Field Engineering on Single‐Atom‐Anchored High‐Entropy Oxides 1.00
Multifunctional Organic Bridge at Self‐Assembled Molecule/Perovskite Interface Enables High‐Performance Inverted Perovskite Solar Cells 1.00
Trilayer Topological Structure with Ni/Mn Concentration Gradient for High-Performance Cobalt-Free Lithium-Rich Oxide Cathode with Enhanced Anionic Redox Reaction 0.86
In Situ Electrochemical Polymerization to Construct Robust Solid Electrolyte Interphase for Advanced Alloy‐Type Anode Materials in Sodium‐Ion Batteries 1.00
Architecturally Inspired Lattice Engineering Enables Long-Life Ultra-High Nickel Cathodes 0.94
Homogeneous and Mechanically Stable SEI Enables Sodium‐Metal Batteries for Extreme Working Conditions 0.91
Anchoring Formamidinium Hypophosphite in Formamidinium Iodide Enabling Impressive Crystallization Quality for Wide-bandgap Perovskite Films 1.00
Electron-Deficient Defects Repair and Residual PbI2 Management toward Air-Processed High-Performance Perovskite Solar Cells 1.00
Crystallization Phase Transition and Buried Interface Modulate via Bifunctional Organic Ligands toward Efficient and Stable Inverted MA/Br-Free Perovskite Solar Cells 1.00
Carboxyl-Functionalized Covalent Organic Framework Engineered Separator Enables Stable Sodium Deposition for High-Performance Sodium Metal Batteries 1.00
Residual Solvent‐Assisted Surface Reconstruction for Efficient Wide‐Bandgap Perovskite Solar Cells 1.00
Dominant Solid-Solution Reactions in a Medium-Entropy NASICON Cathode for High-Rate Sodium-Ion Batteries 1.00
Dual-Chain Functionalized CuS Cathode for Li+/Mg2+ Co-participation towards High-Performance Magnesium-Based Batteries 1.00
High-Performance 3 µm-Thick Bifacial All-Inorganic Perovskite Photovoltaics with Fick-Diffusion-Engineered Linearly Graded Junction 1.00
Unlocking Exceptionally Fast and Large-Capacity Na+ Storage of Fe2SSe via Coupling Multicore-in-Multishell Design and Vacancy Engineering 1.00
Enhanced Interface Properties for Efficient Monolithic Inorganic Perovskite/Silicon Tandem Solar Cell 1.00
Micro‐Alloying Engineered Mg‐Gd‐Mn Negative Electrode With Synergistic Grain Refinement and Non‐Basal Texturing for Long‐Life and Dendrite‐Free Magnesium Batteries 0.90
A Universal Strategy for Quasiplanar Heterojunction Architecture Using Polymer Buffer Layer Enables 19.8% Efficiency and Prolonged Stability 1.00
YIG-Inspired Fe 3d Spin Rearrangement to Construct Built-In Electric Field Achieving Fast-Charging Layered Cathode for Wide-Temperature Sodium-Ion Battery 1.00
Heterogeneous‐Nucleation and Epitaxial‐Growth of Perovskite Enabled by Delafossite‐Type Hole Transport Materials for High‐Performance Solar Cells 1.00
Dynamic Self-Optimizing Interfaces via Cu Corrosion and Anion-Vacancy Synergy in SnSSe @ Recycled Graphite Anodes for High-Performance Sodium-Ion Batteries 1.00
Gradient Micro‐Structure Design Enabling Mechanochemically Durable Single‐Crystalline Ni‐Rich Layered Oxides for Advanced Lithium‐Ion Batteries 1.00
Atomic-Level Dual-Cation Engineering Enables High-Performance Na4VMn(PO4)3 Cathodes for Sodium-Ion Batteries 0.78
Fully Conjugated Biscarboxylate Self-Assembled Molecule Anchoring Enhances Conductive Oxide for Efficient Textured Perovskite/Silicon Tandem Solar Cells 1.00
Oxygen Stacking Controlled Cyclic Capacity and Stability of Layered Oxide Cathodes 1.00
Synergistic Surface Reinforcement and Jahn-Teller Distortion Migration by MgAl2O4 Coating for Long-Term Cycling Lithium-Rich Layered Oxides 1.00
Overcoming the Conductivity-Stability Trade-Off in PEDOT:PSS via Hydrogen-Bond Modulation Enables 20.0% Efficient Bilayer Organic Solar Cells 0.70
Stress-Electrochemical Coupled Reconstruction Engineering of CuSe2 into Cu2Se Nanowire for Enhanced Sodium-Ion Storage 1.00
Balanced Oxygen‐Proton Transport via Dual‐Functional Binders for High‐Performance Low‐Pt Fuel Cells 1.00
Dual‐Anion‐Dominated Electrolyte Design Manipulating Coordination and Boron‐Rich Interphase for Self‐Healing and Long‐Life Mg Metal Anode 0.89
Halogenated Rubber Enables 19.78%-Efficiency Organic Solar Cells With Enhanced Ductility via Halogen-Mediated Non-Covalent Interactions 1.00
Self-Assembled Bi-Monolayer for Inverted Perovskite Solar Cells 1.00
Dimeric Self‐Assembled Molecules Modulate Phase Homogeneity and Anchoring Stability for High‐Performance Perovskite Solar Cells 0.89
Balancing Capacity and Cycling Stability of Ni‐Rich Cathode: Trace Amount of Cobalt Dopant is Unnecessary in Single‐Crystal 1.00
Polyanion Lattice Engineering of Na4MnV(PO4)3 Cathode for High-Performance Sodium-Ion Batteries 1.00
Reconstruction of the Surface for Efficient 3D/Quasi‐2D Heterostructured Inverted Perovskite Solar Cells 1.00
Interfacial Hybrid Engineering Strategy for Highly Efficient and Stable Large‐Area Perovskite Solar Modules 1.00
Isopropanol: A Green Solvent Additive for 20% Efficiency Organic Solar Cells with Excellent Generality and Improved Eco‐Compatibility 1.00
Suppressing Interfacial Deprotonation and Ion Migration via a Proton-Ion Capture Strategy for Stable and Efficient Perovskite Solar Cells 1.00
Space-Confined MoS2 in Gradient-Structured Carbon Spheres for Ultra-Stable Sodium-Ion Storage 0.73
Regulation of Micron-Sized Rutile TiO2 With (111) Crystal Facet Dominated Enables High-Capacity Magnesium Ions Storage 1.00
A Universal Fluorinated Composite Interphase with Self‐Healing Function Enabling Long‐Cycling Rechargeable Magnesium Batteries 0.92
Ultrahigh-Voltage Li-CO2 Batteries Enabled by the Incorporation of Mn(II) Soluble Catalyst and Crown Ether Electrolyte 1.00
Interface Tailoring by Multifunctional Metal–Organic Salts Enables Efficient Perovskite Solar Cells with a Fill Factor Over 86% 1.00
Stabilizing Anionic Redox in Ni‐Rich Li‐Rich Cathodes through Ordered Superstructure 1.00
Dual-Functional Electrolyte Additives to Enhance Magnesium Plating/Stripping Performance for Rechargeable Magnesium Metal Batteries With Pure Amine Solvents 1.00
Overcoming the Stability Issue for Hydrophobic Hole Transporting Layers Utilized in Tin-Lead Perovskite and Tandem Solar Cells 0.23
Bimetallic Substitution Engineering Enabled Fast-Charging Layered Oxide Cathodes for Potassium-Ion Batteries 1.00
Nanoengineered Ultra-Thin Ultra-Low PtZn@Ptskin Nanotubular Array Cathode with Improved Polarizations 1.00
Sequential Crystallization Engineering via a Dual‐Functional Thiophene Derivative Boosts Organic Solar Cell Efficiency to 20.5% 1.00
Fullerene Derivative Layer as a Charge Transfer Bridge for Efficient and Stable Perovskite Solar Cells 0.73
High-Efficiency Quasi-2D Perovskite Solar Cells with 18.28% Efficiency and Improved Stability 1.00
Unlocking Coupled of Electron/Ion Transport for Superior Electrochemical Performance in Hybrid Phosphate Cathodes of Sodium Ion Batteries 1.00
Strengthening Doped Spiro‐OMeTAD With Organic Synthesis Intermediates (1‐Hexylimidazole) Toward Efficient and Stable Perovskite Solar Cells 1.00
Anion Mediated Self‐Assembly of Ammonium Salt for Buried Interfacial Engineering in Efficient and Stable Perovskite Solar Cells 1.00
Positive Phase Transformation Realizing 99.8% Initial Coulombic Efficiency Within Modified P2-Typed Layer-Structured Oxide 0.89
Fluorination-Induced Dual-Functionalized Interface with Multiple Passivation Sites for High-Performance Inverted Perovskite Solar Cells 1.00
Nd Doping Inhibits Lattice Oxygen Loss to Enhance High‐Voltage Durability of Ni‐Rich Cathodes 1.00
An In Situ Thiourea Modified Anode Current Collector for Rechargeable Mg Batteries 0.96
Insight Into Sulfur-Containing Additive to Boost Anti-Oxidation Ability of the Ether-Based Electrolyte for Sodium-Ion Full Batteries 0.89
Wood's Alloy Film Anode with Fast and Durable Na+ Storage 1.00
High-Efficiency and Stable FAPbBr3 Perovskite Solar Cells Enabled by 3,7-POPA: A Multifunctional Phenoxazine-Based Self-Assembled Monolayers 1.00
“Synergia Armor” Hierarchical Configuration Enables Interface Engineering Optimization Boosting Protective Effects and Kinetic Characteristics of Na3V2(PO4)3 1.00
Facet-Stacking Coupling Accelerates Grain Growth During Synthesis of Single-Crystal Ni-Rich Cathodes 1.00
One‐Step Biphasic Interfacial Engineering Stabilizes Single‐Crystal Ultrahigh‐Nickel Cathodes 1.00
d-p Orbital Hybridization Tailoring for Boosted Redox Kinetics in Li-CO2 Batteries 0.94
Homogeneous BN/Perovskite Heterostructure with Nanoscale Heat‐Dissipative Pathways for Stable Perovskite Solar Cells 1.00
Mitigating Jahn–Teller Distortion toward High‐Capacity P2‐Type Layered Oxide Cathodes for Sodium‐Ion Batteries 1.00
Buried Interface Reconstruction Strategy Realizes Efficient and Stable Perovskite Solar Cells 1.00
Oxygen-Assisted Chemical Reaction Enables Buried Interface Optimization for Efficient CsPbI3 Perovskite Solar Cells 1.00
Enhanced Magnesium Ion Diffusion Kinetics by In Situ Formed Dual‐Redox Centers From Layered Bismuth‐Tellurium Framework 1.00
Additive‐Induced Fibrillation of Acceptor Enhances the Efficiency of Sequentially Deposited Organic Solar Cells Approaching 20% 1.00
Pre-Nucleation Chemical Bath Deposition of High-Performance and Reproducible SnO2 Electron Transport Layer for Perovskite Solar Cells 1.00
The Alternating Stress Evolution and Buffering Effects in All‐Solid‐State Lithium–Sulfur Battery with Pre‐Lithiated Silicon‐Based Anode 1.00
Polymer-Coordinated PbI2 in Sequentially Deposited Formamidinium-Based Perovskite Absorbers for Efficient and Stable Solar Cells 1.00
Clonidine Improves the Efficiency and Stability of Perovskite Solar Cells 1.00
Crystallization Manipulation of Wide-bandgap Perovskite by Amino Acid Derivative for High Performance Solar Cells 1.00
Synergistic Engineering of Pre-Seed and Cross-Interface Heterojunctions for Advanced Printable Carbon-Based Perovskite Solar Cells 1.00
Ordered Stacking of (001) Facet‐Oriented 3D Perovskite Crystals with an Ultralow Misorientation 1.00
Structural Modulation for Ultrastable O3‐Type Layered Oxide Cathode Material of Sodium‐Ion Batteries 1.00
Unlocking the Energy Capabilities of Aprotic Lithium‐Oxygen Batteries by Anion‐Specific Adsorption Induced Interfacial Remodeling 1.00
Blade‐Coated Perovskite‐Organic Tandem Solar Cells in Ambient Conditions 1.00
Tailored Molecular Dipole Enables Strengthened Passivation Toward Efficient and Stable P‐I‐N Perovskite Solar Cells 1.00
Organic Anion Immobilization by COF‐1 Enables Ultrathin SEI for Long‐Life Mg Metal Anodes 1.00
High-Performance Perovskite Solar Cells Achieved through Synchronous Regulation of Crystallization and Carrier Dynamics via Amidoxime Additives 1.00
Unlocking the Power of Three: A “Three Birds with One Stone” Strategy for Exceptional Structural Stability and Rate Performances in Nickel‐Rich Cathode Materials 1.00
Ternary Na3V2(PO4)3/Na3V2(PO4)2F3/NaV(P2O7) Heterogeneous Structure with Interactive Built-in Electric Field Enables Advanced Sodium Storage Performance 1.00
Synergistic Enhancement of Efficiency and Mechanical Robustness in Flexible Organic Solar Cells via Solvent‐Assisted Aggregation Reconstitution of the Buried Donor Layer 0.80
A Complementary Hole-Transport Layer of PTAA and SAM on FTO Substrate for p-i-n Structured Perovskite Solar Cells 0.05
Modulating Surface Wettability and Defect States via Multifunctional Amphiphilic Organic Ionic Salts for Efficient and Stable Inverted Perovskite Solar Cells 1.00
Disclosing Crystallization Kinetics for Efficient and Stable Perovskite Solar Cells 1.00
Dihydrazide-Mediated Crystal Engineering and Precursor Anti-Aging for Efficient and Stable Perovskite Solar Cells and Modules 0.75
A Phosphate Thermal Barrier Coating Endows Ni‐Rich Cathode 4.8 V‐Tolerant and Thermal Oxidation Stability Enabling High‐Energy Lithium‐Ion Batteries 1.00
Enhancing Long-Term Cycling Stability of Co-Free Ultrahigh-Ni Layered Cathode Materials via Synergistic Structure/Interface Engineering 1.00
Boosting the Energy Density of Potassium‐Based Layered Oxide Cathodes by Anionic Redox Chemistry 1.00
Synergistic Dual‐Defect Passivation via Iodoethoxyethane for High‐Efficiency Inverted Inorganic Perovskite Solar Cells 1.00
Achieving Superconformal Sodium Deposition on Carbon Nanofiber Film by Constructing Axial Oxygen Coordinated Copper Atomic Sites 1.00
Direct Lead‐Iodide Scaffold Engineering via Macrocyclic Dual‐Function Coordination Breaks the Efficiency‐Stability Gap in 2D Perovskite Solar Cells 1.00
Dual Optimization via Doping PCBM with Diamine for Efficient Pure-Iodide Wide-Bandgap Perovskite Solar Cells 1.00
Modulating Crystallization of Perovskite Thin Films via Zero-Dimensional Cs4PbBr6 Nanocrystals 1.00
Ultrafine 3D Nanoporous Carbon Coated Multicomponent Sulfide Heterojunction for Enhanced Na Ion Storage 1.00
Enhanced Oxygen Redox Reversibility and Structural Stability in Li2MnO3 Cathode Material via High-Entropy Stabilization 1.00
Cu‐MOF Functionalized Hydroxyapatite/Bacterial Cellulose Composite Separator Enabling Dendrite‐Free Fast Charging and Enhanced Thermal Safety for High‐Loading Graphite Anode 1.00
Bifunctional Ligand-Mediated Dual-Site Passivation Enables High-Performance Perovskite Solar Cells with Efficiency Exceeding 26% 0.88
Occlusal Ordered Membrane Electrode Assembly (MEA) with Conformal Array Structure and Superior Performance by Constructing Nested Interface 1.00
Sulfur Vacancy-Regulated NiS2/NiS Heterostructure for High-Performance Sodium Storage 0.90
Layered Sulfides with Anionic Redox Chemistry for Mg Cathodes 1.00
Exposing {010} Active Facets in P2-type Na2/3Ni1/3Mn2/3O2 Cathode Material with Excellent Ultrahigh-Rate Performance for Sodium-Ion Batteries 1.00
Electronic State Synergy of Dinuclear Catalytic Center in Wolframite-type (CoMo)octMotetO Activates Efficient d-p/π* Interaction During Multiphasic Electrocatalysis in Full Range Ambient Air for Li-Air Battery 0.83
Oxygen Vacancy-Driven Lattice Modulation in Zn2P2O7: A Novel Anode Enabling Accelerated Kinetics and Long Cycling Stability for Sodium-Ion Batteries 0.94
Interlayer‐Crosslinkable Hole Transport Layer Achieved Highly Efficient and Stable Perovskite Solar Cells 0.71
Deep Surface Engineering Toward Stable Cycling of Single-Crystal Li-rich Mn-Based Cathode 0.92
High-Entropy Doped KTiOPO4-Type Vanadium-Based Fluorophosphate Cathodes for High-Energy Sodium-Ion Batteries 0.77
Constructing Built-In Electric Field in Na3V2(PO4)3/NaV(P2O7) Heterostructure With Columnar Cluster Morphology Boosting High Capacity and Energy Density for Sodium Ion Batteries 1.00
Coupling Cation Disorder and Anion Redox to Mitigate Voltage Hysteresis in Layered Na‐Storage Cathodes 1.00
An Evaporative Surface Modulation for Efficient Inverted Perovskite Photovoltaics 1.00
Molecular Buffers to Regulate Vapor Deposition Dynamics of Copper Phthalocyanines Enabling Efficient Charge Extraction in Perovskite Photovoltaics 1.00
Ultrahigh-Rate and Long-Cycle Sodium-Ion Batteries via Heterojunctions of Bimetallic/Monometallic Sulfides on N-Doped Carbon Nanotubes 1.00
Synergistic Dual‐Engineering of Hard Carbons via Graphene Oxide Nanosheets: Enabling Ultrahigh ICE Sodium‐Ion Batteries through Edge Passivation and Catalytic SEI Design 0.92
Revisiting the Defect‑Rich Li─Mn─O Structure with Superior Kinetics for High-Power Li-Ion Batteries 1.00
Fe-Fe3O4/Fe7S8@CNSs Heterostructure Boosts Fast Reaction Kinetics for Ultrahigh-Performance Sodium-Ion Battery Anodes 1.00
Boron-Doped Hexagonal Boridene-Derived Sulfides Unlock High Reversible Capacity for Rechargeable Magnesium Batteries 0.92
Stabilized Structure of High-Voltage LiNi0.5Mn1.5O4 via Suppressing Phase Transition and Manganese Dissolution 1.00
Anion‐Anchoring and Interphase Manipulation for Enhanced All‐Climate Sodium Storage in Hard Carbon Anodes 1.00
Ultralight Ionic and Electronic Conducting Current Collector with Durable Interface for High‐Performance Thick Gradient Electrodes 1.00
A Dual‐Functional Coordination Additive for Defect Passivation and Large‐Grain Formation in Perovskite Film 1.00
Constructing Stabilized Buried Interface via a Robust Molecule Bridge for High-Performance Perovskite Photovoltaics 1.00
Ligand‐Field Splitting Parameter Optimization Achieves Synergistic Enhancement of Transition Metal Redox Activity and Structural Stability in High‐Voltage Sodium Layered Oxide Cathodes 1.00
Effective Passivation Enables High Performance CsPbI2Br Perovskite Solar Cells 1.00
Fluorinated Epoxy for Tailoring PbI2 Residue in Perovskite Films to Realize Stable Perovskite Solar Cells with Fill Factor over 87% 1.00
High Entropy‐Tuning Enables Suppressed Phase Transition of Layered Manganese‐Based Oxides for High‐Mass‐Loading Potassium‐Ion Batteries 1.00
Dual‐Site Ni Nanoparticles‐Ru Clusters Anchored on Hierarchical Carbon with Decoupled Gas and Ion Diffusion Channels Enabling Low‐Overpotential, Highly Stable Li‐COsub2/sub Batteries 1.00
Red Phosphorus@SnSe0.5S0.5 Core-Shell Heterostructure Enables Superior Sodium Storage via Synergistic Ion Diffusion and Polyphosphides Trapping 1.00
Medium-Entropy Doping in Na4Fe3(PO4)2P2O7 Cathode via Mg/Cu/Cr Triple Doping: Site-Specific Optimization Unlocks High Conductivity and Ultralong Cyclability 1.00
Ultra‐Thin Lithium–Phosphorus–Sulfur (LPS) Interfacial Electrolyte Layer for All‐Solid‐State Lithium Metal Battery with High‐Rate and High‐Areal‐Capacity Performance 1.00
In Situ Electrochemical K-Doping Assists Li and F Multisite Doping for Long-Life Sodium-Ion Batteries 1.00
Regulating the Hydrolysis of TiCl4 during the Chemical Bath Deposition of TiO2 Electron Transport Layer for High-Performance Carbon-Based CsPbI3 Perovskite Solar Cells 1.00
Modulating Buried Passivation and Aligned Interface toward High‐Performance Perovskite Modules 0.91
Scalable Interface Engineering in Wide‐Bandgap Perovskite Solar Cells via Blade‐Coating Molecules with Promoted Parallel Orientation 1.00
Thickness‐Insensitive Organic Solar Cells with 19.61% Efficiency Processed from All‐Hydrocarbon Solvent and Solid Additive 0.93
Semi-Chelation Solvation Enables High Interface Compatibilities with both Anode and Cathode in a Bulky Mg[B(HFIP)4]2 Electrolyte 0.92
Enhancing Efficiency and Stability of Inverted Perovskite Solar Cells via Dual‐Interface Modification with Identical Cross‐Linking Ligand 1.00
Surface Spinel and Oxygen Vacancies Induced by Multi‐Gas‐Solid Reactions Enhance the Electrochemical Performance of Lithium‐Rich Manganese‐Based Oxide Cathodes 1.00
Interface‐Driven Multi‐Dimensional Regulation of Lead Ion Accumulation and Passivation to Enhance Environmental Stability of Air‐Fabricated Perovskite Solar Cells 0.67
Residual PbI2 Conversion and Crystallization Control for Ambient-Air Fabrication of Industrially Viable Perovskite Solar Cells 1.00
Stabilized 2-Electron Oxalate Mechanism Enabled by Oriented 3D Mo1.33C MXene/rGO Catalyst for Enhanced Reversibility in Flexible Li-CO2 Batteries 1.00
Defects and Oxygen Functional Groups Modulated Soft Carbon with Abundant Closed Pores and Robust Interface for High-Performance Na+-Ion Batteries 1.00
Enhanced Anionic Redox Stability for Sodium Ion Battery Cathodes via Mg‐Modified P2/O3 Biphasic Architecture 1.00
Tuning NiOx/Perovskite Heterointerface via Synergistic Molecular Design Strategy of Carbazole Phosphonic Acid for High-Performance Inverted Perovskite Solar Cells 1.00
Cu Atom Regulated AuPtCu@T-CuxS Janus Heterostructure Electrocatalyst for High-Performance Lithium-Oxygen Batteries 1.00
A General Interfacial-Tuning Strategy for Synthesis of Delocalized Molybdenum Dioxide-Based Rods Enables Efficient Na+ Storage 0.86
Carbon Dot-Supported Single-Atom Materials Boost the Efficiency and Stability of Inverted Perovskite Solar Cells 1.00
Oxidation Stability of Perovskite Solar Cells Reinforced by punicalagin to Resist UV Damage 1.00
Electronic Homogenization Regulation via Nicotinamide Derivative Ligands for Efficient Blade‐Coated Wide‐Bandgap Perovskite Solar Cells 1.00
Facilitating High-Quality Crystal Growth of Two-Step Sequential Processed FAPbI3 Perovskite for Efficient Photovoltaics 1.00
High-Mobility Cu⁺-Induced Multi-Dimensional Structured Copper-Based Sulfide Anode for Advanced Sodium Ion Batteries 1.00
Halogenated Chiral Organic Spacer Cation Regulation for Efficient and Stable 2D Ruddlesden-Popper Perovskite Solar Cells 1.00
Multifunctional Artificial Surface Layer to Realize Stable Na Metal Anode in Ether and Carbonate Electrolyte 1.00
Stable and Efficient Semitransparent Organic Photovoltaics Enabled by Cathode Interface Engineering 1.00
Enhanced Longevity of Lithium Metal Anodes via Fluorine/Nitrogen Co‐Doped Lightweight 3D Carbon Porous Frameworks 0.92
Phase Distribution Management of Methylamine Chloride‐Assisted Formamidinium‐Cesium Perovskite Photovoltaics 1.00
Zirconium Modification Induced Small-Polaron Breakdown in Na4Fe3(PO4)2P2O7 as Superior Cathode in Sodium-Ion Battery 1.00
Solubility‐Driven Acceptor Fibrilization Enables Bilayer Organic Solar Cells with Efficiency Approaching 20% 0.75
Electron Filling Control Mechanism Triggered by the Penetration Effect in Fe3N/Fe Accelerates Sulfur Redox Kinetics 0.92
Side-Chain Engineering of Nickel Naphthalocyanine-Based Hole-Transport Materials Realizes >25% Efficiency and Light-Heat Durable Perovskite Solar Cells 0.92
Solvation Structure Regulation Coupled with Construction of Magnesiumophilic Interface for High‐Performance Mg‐Ion Batteries 1.00
Dual-Interface Regulation for High-Performance Magnesium–Sulfur Batteries 1.00
Sweet Zwitterionic Aspartame for High‐Performance Wide‐Bandgap Perovskite Solar Cells and Tandem Devices 1.00
Built‐in Electric Field and Te Charge Modulation in 2D Bisub2/subTesub3/sub@Sbsub2/subTesub3/sub Heterostructure Enable Ultralong Cycling for Lithium‐Air Batteries 1.00
Aggregation State Regulation of Molecular Hole Conductors for Light‐Stable Perovskite Photovoltaics 1.00
215 203.06
Fluoroacetate-Mediated Dual-Interface Ionic Stabilization in Perovskite Solar Cells 1.00
Halogenation-Regulated Electron-Phonon Coupling Stabilizes Delocalized Excitation Toward High-Performance Organic Solar Cells 1.00
In Situ Phosphoester Polymer Layer Locking Oxygen Migration in Ni‐Rich Cathodes Under Ultra‐High Voltage 1.00
Conjugated Amine Ligand‐Induced Robust‐Conductive Interlayer Enables Efficient and Durable n‐i‐p Perovskite Solar Cells 0.85
Transient Interphase Assisted Crystallization of Antisolvent‐Free Perovskite for Enhanced Device Performance 1.00
Active Sodium Occupancy Ratio-A Guiding Descriptor for Predicting Na4Fe3(PO4)2P2O7 Sodium Storage Performance 1.00
A Composite Interlayer Reconciling Mechanical and Electrical Stability in Perovskite Solar Cells 0.83
Local Dipole Engineering by Over-Coordinated Asymmetric Sites for Ultralow Charge Voltage in Li─CO2 Battery 1.00
Stabilizing Efficient Perovskite/Silicon Tandem Solar Cells With Amorphous and Asymmetric Hole-Selective Contacts 1.00
Intermolecular Interaction-Induced Polarity Modulation of Carbonate Electrolyte for Fast-Kinetics Hard Carbon Anodes in Durable Sodium-Ion Batteries 1.00
Halide-Cation Interactions Enable Controlled Crystallization and Defect Minimization in High-Performance All-Perovskite Tandems 1.00
Synergistic Management of Crystallization and Defects in Tin-Lead Perovskites towards Efficient All-Perovskite Tandem Solar Cells 1.00
Multifunctional Glutathione Enables ISOS-Robust Inverted Perovskite Solar Cells via Dipole Engineering and Redox-Driven Self-Healing 1.00
Sustainable All‐Mn‐Based Layered Cathode with Dynamic Structural Stability for Durable Sodium‐Ion Batteries 1.00
Dipolar Cation Chemically Bonded Tin Oxide and Bridged Buried Interface for Air-Processed Operationally Stable n-i-p Perovskite Solar Cells 1.00
Exciton-Photon Critical Coupling in Size-Tailored Quantum Dots Enables >22% Efficient and Stable Inverted CsPbI3 Solar Cells 1.00
Electrolyte-Induced Interfacial/Bulk Dual Regulation Enables Negligible Capacity Decay in Li-Rich Cathodes 1.00
Tunable and Low-Acidity PEDOT:SAM Supramolecular Complex Hole-Transport Materials for High-Performance All-Perovskite Tandem Solar Cells 1.00
Single-Crystalline Ultrahigh-Ni Co-free Cathode with Magnetic Control as an Alternative to Commercial Cobalt-containing LiNi0.88Mn0.08Co0.04O2 1.00
A Universal Strategy to Stabilize Crystal Lattice and Composition of Wide-Bandgap Perovskites for Efficient Tandem Solar Cells 1.00
Enhancing Photo-Stability of All-Perovskite Tandem Solar Cells via In Situ Construction PEDOT Hole Transport Channels 1.00
“Standing up” SAMs for Efficient Wide Bandgap and All‐Perovskite Tandem Solar Cells 1.00
Cavity-Engineered Polycrystalline Cathodes Resolve Stress Concentration Problem in All-Solid-State Lithium Metal Batteries 0.52
Enhancing the Chemical Stability of Layered Oxides via P─O Bonds Coupling Lattice Oxygen Reactions 0.75
Interphase Self-Optimization Enables Stable Magnesium Anode in Hydrogel Electrolyte 0.70
Rationally Designed Self-Assembled Monolayer for Dual-Site Passivation Enables Efficient and Stable Perovskite Solar Cells 1.00
Large‐Scale, Highly Efficient, and Visibly Transparent Luminescent Solar Concentrators Based on A.I.E. Luminogens 1.00
Alternating Edge‐ and Face‐Sharing Octahedra with Partial Super‐Exchange Enabling High‐Voltage Layered Cathodes 1.00
Mechanochemically Reinforced Dual‐Dynamic Covalent Seeding Enables High‐Performance and Operationally Stable Perovskite Solar Cells 1.00
Managing Grain Boundary Energy by Dipole Strategy in Sn-Pb Perovskite for All-Perovskite Tandems 1.00
Synergistic Passivation Enables 22.76%-Efficiency Quasi-2D Perovskite Solar Cells 1.00
Unified Interface–Bulk Enhancements in Wide-Bandgap Perovskites Enabled by Bifunctional Cyanoacetic Acid for Textured Silicon/Perovskite Tandem Solar Cells 1.00
All Air‐Processed n‐i‐p Perovskite Solar Cells Exceed 26% Efficiency Enabled by Thiacetazone Additive 1.00
Reconstruction of R m Disordered Phase Homogenizing Li+ Distribution Toward Mitigating H2-H3 Phase Transition in LiNi0.95Co0.02Mn0.03O2 1.00
Quasi‐Chimney Electrode Boosts Hydrogen Evolution Reaction via Polarized Laplace Pressure 0.82
Redox Cascade‐Driven Structural Degradation Under Reverse Bias in All‐Perovskite Tandem Solar Cells 1.00
A Multifunctional Interfacial Dipolar Molecule: Universal Applicability in Efficient Rigid, Flexible, and Large-Area Perovskite Solar Cells 1.00
Robust Adsorption of Self‐Assembled Monolayer on NiOx via Multiple Hydrogen Bonds for Stable Inverted Perovskite Solar Cells 1.00
Interface‐Enriched Fluorinated Covalent Organic Framework Enables Stable, High‐Performance n‐i‐p Perovskite Solar Cells 1.00
Multi‐functional Phase‐Changeable Salt for Inverted Perovskite Solar Cells 0.95
Molecular Bridge Regulation of Buried Interface in Perovskite Solar Cells 1.00
Strain-Induced Magnetic Ordering Unlocks Spin-Conserved Catalysis in Lithium-Oxygen Batteries 1.00
Two‐Dimensional Crystalline Alkyne‐Rich Conjugated Carbonaceous Framework for Extremely Fast‐Charging Lithium‐Ion Batteries 1.00
Uncovering Electrochemical-Mechanical Interplay of Stable Ultrahigh-Nickel Cathode via Fine Structure Regulation 1.00
Tailored Arylboronic Acid Derivatives Stabilize Perovskite Octahedron in Inverted Perovskite Solar Cells 1.00
Complementary Anion‐Cation Modulated Electrolyte with Balanced Conductivities for High‐Performance All‐Solid‐State Lithium‐Metal Batteries 1.00
Bulk Passivation of Molybdenum Trioxide Enables Inverted Organic Photovoltaics with Significantly Enhanced Stability under Extreme Conditions 0.86
Nanoscale Colloids Engineering for Minimizing Efficiency Loss in Scalable Perovskite Solar Cells 1.00
Scalable Fabrication of High-Efficiency Thin-Film Perovskite Solar Cells in Air via Polymer-Mediated Synthesis of α-FAPbI3 Microcrystals 0.73
Perovskite/Silicon Tandem Solar Cells With Stabilized Grain Boundaries 1.00
Reversible Oxygen Redox in Li-Rich Mn Based Cathodes Achieved by Regulating the Local Environments of Bulk and Surface Lattice Oxygen 0.89
Defect Passivation with Organic Co-Crystal Layers for Efficient and Stable Inverted Perovskite Solar Cells: A Non-2D-Perovskites Strategy for Surface Treatments 1.00
Asymmetric Self‐Assembled Molecule With High Dipole Moment for Efficient Wide‐Bandgap Perovskite Solar Cells and Tandems 1.00
Thermo-Crosslinking Organic Electron Transport Layers for Stable Perovskite Solar Cells Decoded by In Situ Acoustic Resonance 1.00
Differential Ligand–Cation Interactions Enable 2D‐Template‐Induced Ordered Assembly for Efficient Tin‐Based Perovskite Photovoltaics 1.00
Molecular Engineering of Electron Transport Layers via Steric Hindrance and Chelation Toward Stable Inverted Perovskite Solar Cells 1.00
Phosphate Ester-Modified Acceptor Additives Enable Concurrent Vertical Morphology and Interfacial Engineering for Organic Solar Cells Approaching 21% Efficiency 1.00
Polarize the Solvent to Regulate the Intermediate Phase and Dynamic Crystallization of Perovskite Films 1.00
Synergistic Engineering of Molecular Asymmetry and Short Linkers Enables High-Performance Hole-Selective Contacts in Perovskite Solar Cells 1.00
Perovskite Fluoride Anode Stabilized via Ligand‐Field Engineering for High‐Performance Lithium‐Ion Batteries 1.00
Ion-Defect Dual Management for Achieving Efficient Air-Processed Perovskite Solar Cells With Certified Efficiency 27.1% 1.00
CdTe Quantum Dots Encapsulated on Perovskite Grains Enable Highly Efficient and Stable Perovskite Solar Cells 1.00
Nanoconfined Deposition Enables High-Energy-Density Mg Metal Batteries 1.00
Potassium Cyanate Stabilizes Lattice and Promotes Preferred Orientation for 1.67-eV Wide-Bandgap Perovskite and Perovskite/Silicon Tandems 1.00
Integrated Lead/Iodine Management for Sustainable Perovskite Solar Modules 0.71
Multidentate Chelation by Imine‐Linked Covalent Organic Framework Enables High‐Performance Tin‐Based Perovskite Solar Cells 1.00
Buried Interface Chelating Molecular Bridge Strategy Enables Highly Efficient and Stable Inverted Perovskite Solar Cells 1.00
Guanidyl-Engineered SAMs with Electrostatic–Coordination Synergy for High-Efficiency Tandem-Compatible Perovskite Solar Cells 1.00
High Performance 4.6 V LiCoO2 Cathode Materials Enabled by Surface Lattice Modulation 1.00
Breaking the “Seesaw Effect”: 20.72% Efficiency Organic Solar Cells via Cascade Energy Transfer with a Fluorescent Sensitizer 1.00
Two nm Atomic Thickness Amorphous Red Phosphorus Enables Ultrafast and Ultrastable Sodium‐Ion Storage 1.00
Suppressing Thermal Aggregation of Fullerene Enables ISOS‐L‐3 Stable Inverted Perovskite Solar Cells 1.00
Homology‐Guided Zwitterionic Interlayers for 21% Efficiency Non‐Fullerene Organic Solar Cells 1.00
Medium‐Entropy Regulation Enables Phase‐Stable Layered Oxide Cathodes with Reversible Anionic Redox for Sodium‐Ion Batteries 0.85
Catechol‐Functionalized Self‐Assembled Monolayer for Highly Efficient Sn─Pb and All‐Perovskite Tandem Solar Cells 1.00
In Situ Dual‐Interface Modulation for Homogeneous Sn─Pb Perovskites and Efficient Tandem Solar Cells 1.00
Operationally Stable Perovskite Solar Modules Enabled by MA‐Free Perovskite Crystallization and Passivation via Scalable Coating 1.00
Dual-Phase Regulation via a Volatile Morphology Director Enables Trap-Suppressed Organic Solar Cells with 20.6% Efficiency 0.88
In Situ Formation of Lattice-Distorted Mn-Based Catalysts Boosting High Energy-Efficiency Aqueous Metal-Air Batteries 1.00
Conformationally Locked Macrocyclic Acceptors with Enhanced Photoluminescence for High‐Efficiency Organic Solar Cells 0.75
In Situ Observation of Na2S Growth: A Step Toward High-Energy and Safer Room Temperature Sodium Sulfur Batteries 0.89
ITO Nanoparticles to Stabilize the Self-Assembly of Hole Transport Layer in Inverted Perovskite Solar Cells 1.00
Thiocarboxylate-Mediated Defect Suppression and I2 Scavenging: Achieving 22.16% Efficient and Stable CsPbI3 Perovskite Solar Cells 1.00
P-Block Compounds Incorporated into SEI Enable Ultra-Stable Cell Cycling in Low-Temperature Sodium-Metal Batteries 1.00
Dual-Mode Molecular Regulation of Perovskite Crystallization Enables Efficient and Stable FAPbI3 Solar Cells and Modules 0.83
Entropy‐Driven Polymer Electrolyte with Liquid Single‐Atoms for Fast‐Charging Solid‐State Sodium Batteries 1.00
Green Porphyrin Interface Anchoring Enables >24% Efficiency in n-i-p Perovskite Solar Minimodules 1.00
Precise Morphology Control via Backbone-Derived Solid Additive Enables Binary Organic Solar Cells to Achieve 20% Efficiency and Thick-Film Compatibility 1.00
A Giant Acceptor with a Novel Oxygenated Linker Modulates Molecular Crystallization Kinetics for High-Efficiency Non-Halogenated-Processed Organic Solar Cells 0.94
Meticulous Construction of Internal Encapsulation Layer via In Situ Self‐Cross‐Linking Polymerization and Ring‐Opening Addition Reactions for Efficient and Environmental Perovskite Solar Cells 1.00
Synergistic Structural and Defect Engineering in MoS2 Featuring Ultra-Expanded Interlayers for Fast-Chargeable and Long-Durable Sodium-Ion Batteries 0.93
Localized Electrostatic Interaction Stabilize Perovskite Solar Cells 0.95
Regulating H-/J-Aggregation and Suppressing Exciton-Vibration Coupling of Fused Ring Electron Acceptors Enable 20.51% Efficiency of Organic Solar Cells 1.00
Stopping Phase Separation Enables Durable Wide‐Bandgap Photovoltaic Perovskites 0.92
Organic Layer Bridged 3D/2D Perovskite Heterojunction for Efficient and Stable All‐Perovskite Tandem Solar Cells 1.00
Electrostatically Enhanced Self-Assembled Monolayers Anchoring for Scalable and Stable Inverted Perovskite Solar Cells 1.00
Single-Atom Engineering for Synergistic Nucleation and Interfacial Regulation Enabling Durable Anode-Free Sodium Metal Batteries 0.88
Tandem Conversion of Polysulfides via Coupling Ni Single–Atoms and Clusters for Na–S Batteries 0.89
Dynamic Ni–O Bonding Induced by Orbital Degeneracy Breaking for Efficient Li2CO3 Decomposition 1.00
Micelle-Induced Nucleation and Surface Chemical Polishing Co-Strategy for Efficient Tin-Lead Mixed Perovskite Solar Cells 1.00
Breaking Bond-Strain Lockstep in Multielectron Anodes 1.00
Vacancy-Engineered Ceria Enables 4f-Orbital-Driven Redox Catalysis for Bidirectional Sulfur Conversion in Li─S Batteries 1.00
Oxygen-Mediated Isotropic Lithium Diffusion on Electrocatalyst Surface for Efficient Li–CO2 Batteries 1.00
Strengthening Durability of Electron Selective Layer and Interface via Trifluoromethoxy-Functionalized Biguanide Cation Toward High-performance Air-Processed n-i-p Perovskite Solar Cells 1.00
Bicontinuous Structure Mediated Microstructural Engineering of Hard Carbon for Enhanced Sodium Storage 0.69
A Multifunctional 2D‐Conjugated BDT Polymer Interlayer Enables Over 20% Organic Solar Cells 1.00
In Situ Building Halide‐Alloy Dual‐Phase Interfaces for Dendrite‐Free Sulfide Solid‐State Batteries 0.93
Universal 3D/2D Surface Heterojunction-Based Piperidine Derivatives for Efficient Inverted Perovskite Solar Cells 1.00
Achieving 20.80% Efficiency in Ternary Organic Solar Cells via Suppression of Static and Dynamic Disorder 0.89
Engineered Crystalline Heterostructure Interphase Enabling Dendrite-Free Sodium Metal Anodes with Long-Term Stability 1.00
Liberating Ca2+ Storage from Lattices: Amorphous FePOx Unveiling an Inside-Out Adaptive Cathode Paradigm 1.00
Bidentate Anchoring Enables Concurrent Grain Orientation and Lattice Strain Mitigation in Wide-Bandgap Perovskites for High-Performance All-Perovskite Tandem Solar Cells 1.00
Tailoring the Reaction Heterogeneity for Robust Li‐Rich Cathodes 0.86
Synergistic Engineering of Nonmagnetic Ions Enables Decoupling of Magnetic Frustration and Structural Dynamics in Cobalt-Free High-Nickel Cathodes 1.00
Robust Organic Photovoltaic Ternary Strategy Pairing Tunable Wide-Bandgap Perovskites for Efficient Perovskite/Organic Tandems 1.00
Pseudo-Arch Bridge-Inspired Stress Modulation at Buried Interface for Stable High-Efficiency Perovskite Solar Cells 1.00
Phosphine Interlayer Chemical Hardness Engineering via Crystallization Regulation for Wide‐Bandgap Perovskites and All‐Perovskite Tandems 1.00
Ultrastable Calcium Metal Anodes Enabled by a Strongly Coordinated Electrolyte Derived Bilayer Solid Electrolyte Interphase 0.90
Bisphosphonate-Embedded a π-Conjugated Passivator Enable Efficient and Stable n-i-p Perovskite Solar Cells with Low-Polarity Solvent Processing 0.92
Nano-Particulate Surface Pinning of CeO2 Enables Durable High-Voltage Lithium-Ion Batteries 0.69
Al Pinning Effect in Birnessite for High-Performance Ammonium-Ion Storage 0.92
High Efficiency (∼18%) Organic Solar Cells with 500 nm-Thick Toluene Cast Active Layer by Aggregation Manipulation and Additive Engineering 0.77
Implanting Crystal Nuclei at the Buried Interface to Regulate the Growth of Inorganic Perovskite for High-Performance Solar Cells 1.00
Achieving Enhanced Reversible Anionic Redox Activity in Li-Rich Layered Oxides via LiCoMn5 Superstructure Design 1.00
Oriented Crystallization of Perovskite Film via Fluorine‐Containing Hyperbranched Polymer for Efficient and Stable Perovskite Solar Cells 0.93
Multifunctional Buried Molecule-Bridge for High-Performance Inverted Perovskite Solar Cells 0.96
Simultaneous Interfacial Defect Passivation and Free-Volume Reduction by Fluorinated Hole Transport Materials for High-Performance Perovskite Solar Cells 1.00
Regenerative Redox Cycling Enables Stable Tin Perovskite Photovoltaics 1.00
Pre-Anchored Ionic Bond Mediators Enabling Controllable Monolayer Assembly for High-Performance Perovskite Solar Cells and Modules 1.00
Molecular Extrusion Drives Polymer Dynamic Soft Encapsulation to Inhibit Lead Leakage for Efficient Inverted Perovskite Solar Cells and Modules 1.00
Molecular Hybrid Bridging for Efficient and Stable Inverted Perovskite Solar Cells without a Pre‐Deposited Hole Transporting Layer 1.00
Levetiracetam-Assisted Perovskite Crystallization and Tripartite Lead Iodide Reduction in Perovskite Solar Cells 1.00
Boosting the Efficiency of 1.84 eV Wide-Bandgap Perovskites Photovoltaics Beyond 19% via Yb3+ Engineering 1.00
Fast‐Charging and Long‐Cycle Sodium‐Ion Batteries Enabled by an Ultra‐Stable Carbon Anode 1.00
Decoding Multi‐Electron Redox Pathways in Carbon‐Free Iron Selenide Cathodes: Enabling Energy‐Dense All‐Solid‐State Lithium Batteries Across Extreme Temperatures 1.00
20.64% Efficient and Stable Binary Organic Solar Cells via Thermodynamic‐Engineered Interlayer Diffusion and Exciton Generation 1.00
Minimizing Photovoltage Loss for Efficient p–i–n Perovskite Solar Cells via a Dual‐Site Anchoring Bridge 1.00
Siloxane‐Tethered Halogenated Thiophene Additives Enable Excellent Fibrillar Morphology and Air Processing for High‐Performing Polymer Solar Cells 1.00
Breaking the Conductivity-Capacity Trade-Off in MCl6 Anionic Framework: Amorphous Oxyhalide Cathode Materials Enable ≈1100 Wh Kg−1 at Cathode-Level in All-Solid-State Lithium Batteries 1.00
Tailoring Graphite Interlayers with Electron‐Acceptor Bridges Raises Ion Diffusion Kinetics for Ultrafast Charging Batteries 0.55
Visualization of Thermal‐Induced Degradation Pathways of High‐Ni Cathode: a Comparative Study in Solid Chloride and Liquid Electrolytes 0.36
Cation‐π/π–π Synergy Induced Self‐Assembly of Semiconductor Spacers for High Efficiency and Stable 2D/3D Perovskite Solar Cells 1.00
Competitive Crystallization Modulated Phase‐Homogeneous Wide‐Bandgap Perovskites for Monolithic Perovskite‐Organic Tandem Solar Cells 1.00
Breaking the Efficiency-Stability-Sustainability Trilemma in all-perovskite Tandem Solar Modules via Oxidative Blockchain Molecular Engineering 0.96
Superstructure Engineering Enables NASICON‐Type Phosphate Cathodes with Increased Working Voltage and Energy Density 1.00
Reducing Structural Distortion by Tailoring Orbital Interactions in High‐Voltage Polyanionic Cathodes 1.00
Fluorinated Pseudo-Halide Anion Enables >19% Efficiency and Durable Perovskite Quantum Dot Solar Cells 0.91
Suppressing Open‐Circuit Voltage Loss in Perovskite Solar Cells via Ligand‐Assisted Crystallization Dynamics Regulation Strategy 1.00
Additive with Multinary Interactions to Perovskite Precursor Species for Catalyzed Crystallization of Antisolvent-Free α-FAPbI3 Solar Cells 1.00
Variable-Temperature X-Ray Scattering Unveils the Solution Aggregation Structures and Processing Resiliency of High-Efficiency Organic Photovoltaics with Iodinated Electron Acceptors 1.00
Unlocking the Ligand-Dominated Redox Activity in π–d Conjugated Coordination Polymers for High-Capacity and Stable Potassium Storage 1.00
Unveiling the Mutual Promotion Mechanism of Adjacent Vacancy Defects Enables High-Performance Perovskite Solar Cells 1.00
Reversing the Reaction Order Between FA+ and Rb+ Enhances the Photovoltaic Performance of Blade-Coated Perovskite Solar Cells 1.00
High Performance Inverted Perovskite Solar Cells via Heteroatom‐Containing Multifunctional Spiro Self‐Assembled Monolayers 1.00
Selective Crystallization Delay in Wide‐Bandgap Perovskites Enables Initial Homogeneous Phase for Square Centimeter Perovskite/Organic Tandem Solar Cells 1.00
Crystallization Modulation Through Electron Transport Layer Surface Reconstruction Enables High‐Performance Full‐Air‐Processed Perovskite Solar Cells 0.83
Over 20% Efficient Water-Based Layer-by-Layer Organic Solar Cells with High Thickness Tolerance Enabled by Surfactant Promoted Electrostatic Interaction 1.00
Capacitance‐Enhanced Battery: Integrating High‐Density Battery Capacity with Supercapacitive Swiftness in an Ultra‐Large MXene Architecture 0.85
Stabilizing Grain Boundaries by In Situ Formation of Robust Layered Metallo-Organic Complex toward High-Performance Inverted Perovskite Solar Cells 1.00
Designing Co‐Free Medium‐Ni Layered Oxide Cathodes via Additional Li Substitution 0.93
Enabling Multielectron Reaction of Polyanionic Cathodes Toward High‐Energy Calcium Rechargeable Batteries 0.87
Albendazole Passivation in Inverted Wide‐Bandgap Perovskite Solar Cells toward Efficient Perovskite/CuInGaSesub2/sub Tandem Photovoltaics 1.00
Conjugated Polyelectrolyte with Long‐Range Ordering and Compact Molecular Packing as Hole‐Transporting Material for Efficient and Flexible Organic Solar Cells 1.00
Activating Ferroelectric‐Magnetic Synergistic Effects at Cathode‐Electrolyte Interfaces Toward Superfast and Stable Sodium Storage 0.80
A Multi‐Element Composition Modulation Strategy for Designing High‐Capacity and Stable O3‐Type Na‐Layered Oxide 1.00
Kilogram‐Scale Production of Ultrafast‐Charging Micro‐Expanded Graphite Anode toward High‐Power and Long‐Life Ah‐Level Pouch Batteries 1.00
Edge-Dislocated WO3 Photocathode Toward Efficient Photo-Assisted Li-O2 Batteries 0.31
Thiophene Expanded Self‐Assembled Monolayer as Hole Transport Layer for Organic Solar Cells with Efficiency of 20.78% 1.00
Synchronous Phase Transformation for Efficient Wide‐Bandgap Perovskite Photovoltaics 1.00
Immobilizing Lead and Healing Surface Defects via Perfluorinated Tertiary Amine Molecules Enables High‐Performance Sustainable Inverted Perovskite Solar Cells 0.89
Subsurface Electron Trap Enabled Long-Cycling Oxalate-Based Li-CO2 Battery 0.92
Turning Waste into Treasure: Pretreatment Strategy for Promoting Secondary Grain Growth by Reusing Excess Lead Iodide in Perovskite Solar Cells 1.00
Initiating Strain Field for Mitigating Lead Leakage in Perovskite Solar Cells with Built‐in Encapsulating Networks 1.00
Enabling Photostable Perovskite Solar Cells via Sustainable Operando Defect‐Passivation Strategy 0.14
Biomimetic Mineralization Nucleation with Polymer Template Enabled High‐Performance Perovskite Solar Cells by Anti‐Solvent‐Free Technology 1.00
Industry‐Compatible Fully Laminated Perovskite‐CIGS Tandem Solar Cells with Co‐Evaporated Perovskite 0.29
Adaptive Stress Response in 2D Graphene@Se Composite toward Ultra‐Stable All‐Solid‐State Lithium‐Selenium Batteries 1.00
Regulating Polymeric Adsorption Dynamics via Monolayer‐Architected Hydrotalcite Integration for High‐Performance Organic Solar Cells 1.00
Nanocrystal‐Nucleus Template Strategy for Efficient Wide‐Bandgap Perovskite Solar Cells with Enhanced Homogeneity and Energy‐Level Alignment 1.00
A Self‐Assembling Composite Structural Design for the Conversion of Hydroxyl‐Anchored Bonds Obtains High Efficient and Stable Perovskite Solar Cells 1.00
Bifunctional Compound Induced Dual Back Surface Fields for Efficient Hole Transport Layer‐Free Perovskite Solar Cells 1.00
Long‐Range Cation Disorder Enhances Comprehensive Performance in Mn‐Rich Layered Sodium Cathodes 0.77
Preferred Parallel Alignment of Sulfonamide Enables High-performance Inverted Perovskite Solar Cells 0.87
Amidation‐Retarded Synthesis of Perovskite Quantum Dots with Low Defect Density and Enhanced Carrier Transport for Efficient Light Emitting Diodes and Solar Cells 1.00
In Situ Dual-Ionic Charge Compensation for CsxFA1-xPbI3 Perovskite Quantum Dot Solar Cells with Over 18% Efficiency 1.00
Anchoring Nickel and Stabilizing Oxygen in Coherent LiNiO2@LiFePO4 Composite Cathode Materials for Rechargeable Lithium-Ion Batteries 1.00
Ternary Inert Element Co-Doping: a New Approach to Stable 4.7 V LiCoO2 1.00
Multifunctional Interfacial Molecular Bridging Strategy Enables Efficient and Stable Inverted Perovskite Solar Cells 1.00
Precisely Tuning 3D/Quasi‐2D Perovskite Heterojunctions in Wide‐Bandgap Perovskites for High‐Performance Tandem Solar Cells 1.00
Universal Ion Migration Suppression Strategy Based on Supramolecular Host–Guest Interaction for High-Performance Perovskite Solar Cells 1.00
Conjugation Pathway of Benzobisoxazoles in Polymer Donors Mediates the Charge Management and Enables Organic Solar Cells with Record Certified Efficiency 1.00
Breaking the Vicious Spiral to Suppress Oxygen Loss in Li‐Rich Oxide Cathode Materials 0.67
Solution‐Processable PEDOT for Organic Solar Cells: From One‐Pot Synthesis to Kinetically‐Controlled Polymerization 1.00
Adhesively Bridging Co‐Self‐Assembled Monolayer and Perovskite Via In Situ Polymerization for Enhanced Stability of Inverted Perovskite Solar Cells 1.00
Manipulation of Interface Recombination via Multi‐Site Passivator for Efficient Inverted Perovskite Solar Cells and Modules 1.00
Antisolvent-Free Dual-Anion Regulation for High-Efficient Sn-Pb and All-perovskite Tandem Solar Cells 0.89
Interface Field‐Effect Passivation Enabled by Selectively Extruded Cations for Printable Mesoscopic Perovskite Solar Cells with Improved Performance 1.00
Minimizing Inter‐Lattice Strain to Stabilize Li‐Rich Cathode by Order–Disorder Control 0.79
P‐Band Center Engineering of Sulfur to Weaken Fe─S Bond Toward Superior Sodium‐Ion Storage 1.00
Guideline of Dynamic Tunnel Structural Evolution for Durable Sodium‐Ion Oxide Cathodes 0.82
Reinforced Perovskite‐Substrate Interfaces via Multi‐Sited and Dual‐Sided Anchoring 1.00
Amidinium‐Based 2D Spacer Cations Enhance Efficiency and High‐Temperature Photostability of Perovskite Solar Cells 1.00
Efficient Sn‐Pb Perovskite Solar Cells Through Inhibiting Hole Accumulation 1.00
Ultra-Soluble 1-Azaphenothiazine Additive Stabilizes High-Voltage LiCoO₂ for 500 Wh Kg−1 Lithium Metal Pouch Cells 1.00
Multidimensional Modulation via Tailored Covalent Organic Frameworks Enables Stable Inverted Perovskite Solar Cells with 26.21% Efficiency 1.00
Decoding Chemo‐Mechanical Failure Mechanisms of Solid‐State Lithium Metal Battery Under Low Stack Pressure via Optical Fiber Sensors 1.00
Bifacially Reinforced Self‐Assembled Monolayer Interfaces for Minimized Recombination Loss and Enhanced Stability in Perovskite/Silicon Tandem Solar Cells 1.00
Heat‐Triggered Dynamic Self‐Healing Framework for Variable‐Temperature Stable Perovskite Solar Cells 0.86
Mitigating Mobile-Ion-Induced Instabilities and Performance Losses in 2D Passivated Perovskite Solar Cells 0.17
Rational Regulation of Layer‐by‐Layer Processed Active Layer via Trimer‐Induced Pre‐Swelling Strategy for Efficient and Robust Thick‐Film Organic Solar Cells 0.92
Nucleation‐Layer Assisted Quasi‐2D Ruddlesden‐Popper Tin Perovskite Solar Cells With High Oxygen Stability 1.00
Functional Group Engineering Stabilizing Precursor Solution and Passivating Defects for Operationally Stable and Highly Reproducible Inverted Perovskite Solar Cells 0.92
Active Organic Salts Enabling Non‐Intrusive Electrolyte Presodiation Strategy 1.00
Gradient Doping for Stress-Relief in Vapor-deposited Perovskite Film to Achieve High-performance p-i-n Perovskite Solar Cells with a 23% Efficiency 1.00
In Situ Formation of a Bi/Mg-Based Hybrid Interphase for Highly Reversible Magnesium Metal Anodes 1.00
2 1.81
Electroanalysis Using Isostatic Graphite Electrodes 0.81
Vacancy Engineering of Nickel Single-Atom Catalysts to Enable Low-Triggering-Potential Electrochemiluminescence of Carbon Nitride 1.00
215 203.52
Sodiophilic Hosts With Pseudocapacitive Kinetics for Robust Anode-Free Sodium Metal Batteries 1.00
Solvent–Anion Counterpoised Electrolyte Enables High‐Rate Magnesium Metal Batteries 1.00
In Situ Interfacial Polymerization Enabling a Dual-Anchor Surface Binding Interlayer for Efficient and Stable Inverted Perovskite Solar Cells 0.91
Schottky‐Orbital Coupling Drives Ion‐Electron Transfer: Triggering Stable Fast‐Charging in MnV‐Based Phosphate Cathode 0.91
Empowering Reversible Anionic Redox in Sodium Layered Oxide Cathodes via Ionic Impedance Matching Interphase 1.00
Photo-Tautomerization-Driven Energy Transfer at the Hole-Transport Interface Stabilizes Efficient Inverted Perovskite Solar Cells 1.00
Dimeric Self-Assembled Monolayer Materials for High-Performance Perovskite and Perovskite/Organic Tandem Solar Cells 1.00
Lithium-Based Deep Eutectic in Spiro-OMeTAD Enable Efficient and Stable Perovskite Solar Cells 1.00
Alkyne‐Based Dual‐Function Self‐Assembled Monolayers for Efficient and Stable p‐i‐n Perovskite Solar Cells 0.72
Piezoelectric COFs Function as Dynamic “Ion Pumps” to Facilitate Li+ Transport in Solid-State Batteries 1.00
Interfacial Energetics Reconstruction via Bridging Engineering for Efficient Inverted Perovskite Solar Cells and Modules 0.91
Spiro-Buckybowl-Structured Hole-Transporting Materials Toward High-Efficiency and Stable p–i–n Perovskite Solar Cells 0.92
High-Efficiency All-Polymer Solar Cells: Toward Sustainable Smart Windows With Flexibility, Semitransparency, and Thermal Insulation 1.00
Electron-Deficient Amines Enable Halide-Anchoring Hydrogen Bonding for Stable Wide-Bandgap Perovskites Toward Perovskite/Organic Tandem Solar Cells 1.00
Constructing Face‐Shared Configuration at the Hetero‐Interface in Li‐Rich Layered Oxide Cathodes 1.00
Chelating Anion-Mediated Solvation Structures for Rechargeable Magnesium Batteries 1.00
In Situ Formation of Guanidinium Derivative and 2D/3D Heterostructure for 26.49% Efficient and Stable Inverted Perovskite Solar Cells 1.00
Concurrent Nucleation of Mixed-Halide Perovskite Phase via Balancing Solvent-PbX2 Interaction for Efficient Solar Cells in Air 1.00
Healing Broken S─S Bonds via d-p Orbital Coupling for Durable Magnesium Batteries 1.00
Tuning Terminal Groups of Hole‐Selective Materials to Suppress Nonradiative Recombination in Inverted Perovskite Solar Cells 1.00
Multi-Site Synergistic Regulation Towards Highly Efficient and Stable Perovskite Solar Cells 1.00
Beyond the Sum of Its Parts: Alkyl‐Chain Engineering Unlocks Dopant‐Free Pyrene‐Based Antenna Molecules for Efficient Perovskite Solar Cells 0.89
Dual-Functionalized Bonding Management via Aromatic Formamidine Ligands Enables 25.57%-Efficient Ambient-Printed Perovskite Solar Cells 1.00
Sulfur-Modulated Fully-Conjugated Self-Assembled Monolayers for Synergistic Dual-Interface Optimization in Inverted Perovskite Solar Cells 1.00
Built-In Electric Field Modulates Phase Transition and Suppresses Voltage Hysteresis in Mn-Based Phosphates Cathode for Sodium–Ion Batteries 1.00
Highly Polarizable Embedded Interfaces Toward Superior Organic Heterojunction Photocatalysts 1.00
Capturing O2•‒ Intermediate to Promote Oxygen-Reduction-Reaction Pathway for Li-O2 Batteries with High-Areal-Capacity 1.00
Synergistic Molecular Locking Through Sodium‐Integrated Cross‐Linkable Scaffold Enables Durable Perovskite Solar Cells and Modules 1.00
Reducing Interface Energy Loss of Perovskite Solar Cells by Molecular Engineering of Hole‐Transporting Materials 0.80
Orientation Site‐Induced Antiferromagnetic Coupling Stabilizes Reconstructed Cathode From Spent Lithium‐Ion Batteries 1.00
Correlating Structure Change With Magnetic Ordering and Spin Fluctuation During Delithiation of Transition Metal Layered Oxide 0.78
FeCoN6 Sites Unlock Superior Sodium-Ion Storage Through Synergizing Capture-Release and Orbital-Mediated Charge Delocalization 1.00
Highways Construction in Amorphous Carbon Anode Enables 10C Fast-Charging Sodium-Ion Batteries 1.00
Manipulating the Dispersed Domain of Pinning Dopants in Layered Oxide Cathodes for Sodium‐Ion Batteries 1.00
Resolving the Efficiency–Mechanical Trade-off in Organic Solar Cells: 20.4% Enabled by Hydrogen-Bonding Engineering 0.88
Spatial Molecular Engineering of Hole Semiconductors Enables Record Efficiency and Durability in Inverted Perovskite Solar Cells 1.00
Temperature-Potential Coupled Regulation of LiPF6 Decomposition to Construct LiF Grain Boundary-Rich Interphase on Graphite Anode for Fast-Charging Li-Ion Batteries 1.00
Dual-Site Geometry Mediates Dynamic LiO2 Binding for Efficient Lithium–Oxygen Batteries 1.00
Unlocking High-Performance Na-CO2 Batteries via a d-p Orbital Hybridization Descriptor for Rational Catalyst Design 1.00
Chloride Chemistry in Multivalent-Metal Batteries: From Interphase to Bulk Phase 1.00
Competitive Ni/Mn Reduction and Microstrain-Coupled Negative Thermal Expansion in Delithiated Li-Rich Cathodes 0.63
Accelerating Electrochemical Kinetics in Na4Fe3(PO4)2P2O7 Cathodes Through Oxygen Vacancy Modulation for Wide-Temperature Ah-Level Sodium-Ion Batteries 1.00
Toward Practical Ultralong‐Life Li‐Air Batteries in High‐Humidity Environments: A Synergistic Strategy for Dual‐Interfacial Engineering 1.00
Triple‐Functional Hydrazide‐Based Modifier for Self‐Assembled Monolayers/Perovskite to Obtain 26.29%‐Efficiency Inverted MA‐Free Perovskite Solar Cells 1.00
Dual Modification Strategy of Ionic Liquid for Durable Perovskite Photovoltaics 1.00
Interface Molecular Locking Synergized with Self‐Assembled Monolayers for Efficient Perovskite Solar Cells 1.00
Suppressing Alkyl Ammonium Deprotonation with Low‐pKa Solvent for Reproduceable and Stable High‐Efficiency Perovskite Solar Cells 1.00
Orbital Charge Exchange Transition Conceptually Activates Multi-Bifunctional Li–O2 and Li–CO2 Pathways at Deep and Shallow Energy Levels in Li–Air Batteries 0.71
Stabilizing Intrinsic Phase of Phase-Pure FAPbI3 by Organic Molten-Salt Molecular Bridges 1.00
Rationally Tailoring Simple Non-Fused Ring Electron Acceptors Toward Zwitterionic Interlayers for Organic Photovoltaics: The Effect of Synergetic Sidechains Engineering 1.00
Unraveling the Role of Molecular Flexibility in Enhancing Pyridine Based Defect Passivation for Efficient and Stable Perovskite Solar Cells 1.00
Unlocking the Secrets of Divergent Sodium Storage Performances in Sb and Bi Anodes 1.00
Molecular Integration Strategy Enables Simultaneous Modulation of Crystal Growth and Interfacial Energy Loss for Efficient Inverted Perovskite Solar Cells 1.00
Reconfiguring Ionomers in Proton Exchange Membrane Fuel Cell Catalyst Layer to Promote Multi-Species Transport and Durability 1.00
Molecular Traffic Control: Fast Mg2+ Transport via Carbonyl-Induced Ion-Dipole Interactions in Covalent Organic Framework Channels 1.00
Phenothiazine‐Phenoxazine Hybrid Cross Hole‐Transporting Material for High Performance Perovskite Solar Cell 1.00
Thermodynamic Control of Oxygen Vacancies for Li‐Rich Cathode Materials 0.38
High-Conductivity Argyrodite Electrolyte with Self-Passivating Stability for Single-Electrolyte All-Solid-State Lithium Batteries 1.00
Beyond Solution Processing: Vacuum Evaporation of Carbazole-Phosphonic Self-Assembled Molecules Enables Flexible Perovskite Solar Cells with >25.4% Efficiency 1.00
Boosting Magnesium Storage Performance of π‐Conjugated Polyimide Cathodes Through Synergistic Molecular and Electrolyte Engineering 0.63
Modulating Janus Effect of Cations to Control Electronic Symmetry and Hole Mobility in Spiro-OMeTAD for Perovskite Solar Cells 0.90
Pioneering Interface Configuration with Fermi‐Level Tailoring for Tin Perovskite Photovoltaics 1.00
Regulating Sodium Vacancy and Local Coordination Structure Enabled Stable Mn-Based NASICON Cathodes 1.00
Reversible Monoclinic Transition Buffering and Stepwise Uniform Delithiation in Ni-Rich Layered Cathodes 1.00
Engineering Anionic Aggregation in Dilute Electrolyte for High Performance Layered Oxide Cathodes for Sodium‐Ion Batteries 1.00
d-π Coupling Effect for the Positive-Valent Electrochemical Reaction Acceleration in Organic Chalcogenide Cathodes 1.00
Surface Halide Inversion Mitigates Voltage Losses in Wide-Bandgap Perovskite for Efficient Tandem 0.90
Proton Transfer-Hydrogen Bonds Network for Highly Efficient and Stable Inverted Perovskite Solar Cells 1.00
All-in-One Molecule Regulated Buried Interface and Crystallization of Tin–Lead Perovskite for Efficient All-Perovskite Tandem Solar Cells 1.00
Cyclically Dynamic Defect Management Enables High-efficiency Sn─Pb Perovskite Photovoltaics with Enhanced Photostability and Fatigue Resistance 0.94
Homogeneous SnF2-Induced Strain Modulation in Sn–Pb Perovskites for High-Performance Monolithic All-Perovskite Tandem Solar Cells 1.00
Regulating the Li/Ni Mixing Ratio to Enhance Transition Metal-Lattice Oxygen Interaction for Achieving Long Life Lithium-Rich Layered Oxides 1.00
Reversible Thermally Driven Phenyl Torsion in Self‐Assembled Monolayers Releases Strain for Heat‐Resilient Inverted Perovskite Solar Cells 1.00
Spatially Selective Substitution for Structural Stabilization of Sodium Layered Oxide Cathodes 0.79
Homogenizing Self-Assembled Monolayers via Covalent Organic Frameworks for Inverted Perovskite Solar Cells 1.00
Surface Vacancy Engineering Re‐Routes First‐Cycle Redox for Stabilized Li‐Rich Layered Cathodes 0.08
Dual-Functional Molecular Stabilization of Spacer Cation-Mediated Aging Dynamics in Low-Dimensional Perovskite Precursors Enables Efficient Solar Cells 1.00
High-Capacity Metastable LixCoO2 Cathode Enabled by Coherent Intergrowth of T#2 and O2 Phases 1.00
Elucidating Highly Activated Transition Metal Redox Chemistry in Low‐Nickel O3‐Type Layered Oxide Cathodes for Sodium‐Ion Batteries 0.93
In situ Crystal Structure Growth and Control for Enhancing Comprehensive Performance in Ultra‐High Nickel‐Layered Lithium Cathodes 0.91
Donor–Acceptor Interaction Optimized Film‐Forming Processes Lead to Efficient Organic Solar Cells and Modules Fabricated with Non‐Halogenated Solvents 1.00
Fully Locked Conjugated Backbones in Simple-Structured Polymer Donors Enabling High-Performance Organic Solar Cells 1.00
Modulating Adsorption Orientation of Multi-Site Ligand Enables Perovskite/Silicon Tandem Solar Cells with Voltage Exceeding 2 V 1.00
Record-Breaking Discharge Capacity and Rate Capability in Li─O2 Batteries Through Magnetic Field-Induced Short-Range Order Li2O2 1.00
In Situ Crosslinked Self‐Assembled Monolayer as Processing Stable Hole Selective Contact in Perovskite Solar Cells 1.00
Molecular Design‐Driven Interface Engineering Enabling Simultaneous Defect Passivation and Enhanced Hole Extraction in Perovskite Solar Cells 1.00
In Situ Polymerization-Assisted Crystallization of Open-Air Blade-Coated Perovskite Films for Efficient Solar Cells and Mini-Modules 1.00
Fast-Charging Hard Carbons: A Fully Organic SEI Enables Low-Coordination Interfacial Environments and Fast Na+ Desolvation 0.55
Asymmetric Structure-Induced d-Orbital Splitting Boosts Highly Active and Stable Li–CO2 Batteries 1.00
Buried Interface Modification for High Performance and Stable Inverted Perovskite Solar Cells 1.00
Valence-Modulated Na4Fe3(PO4)2(P2O7) Cathode Tuned by Orbital-Delocalization for Extreme-Temperature Sodium Storage 1.00
Boron‐Centered Organic Salts Enabling Na‐Ion Supply and Interfacial Protection for Na‐Ion Batteries 1.00
Fluorinated Lead‐Chelating Molecules Boost Performance, Stability, and Safety of Hole Transport Layer‐Free Carbon‐Based Perovskite Solar Cells 1.00
Unlocking the Potential of Phosphorus Anodes for Sodium-Ion Batteries via Tailored Reversible Na/Polyphosphide Chemistry 0.16
A Synergistic Cu/Ca Dual-Doping Strategy for High-Stability and Fast-Charging O3-Type Cathode in Sodium-Ion Batteries 1.00
Reducing Energetic Disorder for High-Efficiency Perovskite Solar Cells with Low Urbach Energy by in Situ NH3 Generation 1.00
Dual-Ligand Regulation of Homogeneous Cation–Anion Distribution Enables Efficient and Stable Perovskite Solar Cells 1.00
Intergrowth of Prismatic and Octahedral Layers to Inhibit Fe Migration in Oxide Cathodes for Sodium-Ion Batteries 1.00
Polarity Gradient CEI Driven Rapid Desolvation for Extreme Fast‐Charging Potassium‐Ion Batteries 1.00
Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells via Isomerization Engineering of Self-Assembled Monolayers 0.86
Edge/Corner‐Sharing 2D Perovskite Functional Layer for Efficient and Stable Inverted Perovskite Solar Cells 1.00
Converting Residual Unstable PbI2 into Robust 2D Perovskite via Spacer Cation Engineering Toward Operationally Stable Perovskite Solar Cells 1.00
High-Temperature Long-Term Cycling Capability of Lithium Batteries Enabled by Releasing Local Constriction 1.00
Protein Cage Inspired Bridge‐Island Effect Enables Low‐Temperature Targeted Self‐Assembly of Hierarchical Hollow Polyanionic Cathodes for Sodium‐Ion Batteries 1.00
Strong Electron-Withdrawing Molecules Facilitating π–π Stacking and Charge Transfer Complexes at Buried Interface and Enabling an Inverted PSC with Open-Circuit Voltage of 1.2 V 1.00
Wide‐Temperature Operation of High‐Capacity Aqueous Chlorine Batteries Enabled by Complexation Chemistry 1.00
Kinetic Control of Anisotropic Grain Growth in Ni‐Rich Layered Cathodes 0.90
Self‐Consistent Cation–Anion Integration Eliminates Passivation Crosstalk for Inverted Perovskite Solar Cells 1.00
Bridging Donor Ligands Enable an Ultrastable Graphite Anode for Sodium‐Ion Batteries 1.00
Controllable Preparation of Hierarchically Charge‐Separated Interface to Effectively Promote the Desolvation and Kinetics of Lithium Ions 1.00
K+ Vacancies and Fluorine Substitution Synergistically Regulate KTiOPO4 Anode for All-Climate and Long-Life Potassium-Ion Batteries 1.00
Long-Lived Charge-Transfer State and Interfacial Lock in Double-Cable Conjugated Polymers Enable Efficient and Stable Organic Solar Cells 0.92
Controlled Crystallization Kinetics via Conjugated Organic Spacers Enables Ordered Epitaxial Growth of Two‐Step Deposited Tin‐based Perovskite Solar Cells 1.00
Structural Insights Into Phase Formation of Sodium Layered Cathodes Materials with Prominent Electrochemical Performances 0.87
Ultralow‐Cost Lacunary Metal‐Oxo Framework Enables Efficient and Stable Organic Solar Cells 0.97
In Situ Nanoscale Probing of Lithium-Aluminum Alloying / De-Alloying Kinetics and Mechanical Failure in All-Solid-State Batteries 1.00
Self-Medicating Molten-Salt Synthesis of Bulk-Stabilized High-Energy Cathodes for Li-Ion Batteries 1.00
A π‐Conjugated Molecular Bridge Strategy for Constructing Efficient Hole Transport Pathways in Inverted Perovskite Solar Cells 1.00
Ion‐Mediated Self‐Healing Strategy Enabling Efficient and Stable ETL‐Free Perovskite Solar Cells 1.00
Spinel‐Layered Heterostructure Enables Reversible Oxygen Redox in Lithium Manganese Oxide 0.80
Antisolvent-Bathing Strategy with Ultra-Wide Processing Window for Making High-efficiency Perovskite Solar Cells in Ambient Air 1.00
Prolonging Exciton Diffusion Length via Modulating Aggregation Structures for Binary Organic Photovoltaics Approaching 20% Certified Efficiency 1.00
Halogenation‐Engineered Acceptor Enables 20.14% Efficiency in Hydrocarbon‐Solvent Processed OSCs: From Binary Trade‐Offs to Ternary Synergy in Exciton and Energy Loss Management 1.00
Universal Chemical Presodiation Under Air Condition for Highly Stable Na‐deficient Oxide Cathodes 1.00
Origin and Suppression of Intragranular Cracks for Long-Cycling High-Ni Co-Free Cathodes 1.00
Synergistic Self‐Assembled Monolayers Reinforce Buried Interface Anchoring for High‐Efficiency Tandem Perovskite Solar Cells 1.00
Mechanistically Engineered Heterojunction From Spent LFP for Efficient Oxygen Evolution Electrocatalysis 1.00
Suppressing Halide Segregation of Wide Bandgap Perovskite by Interface Molecular Coordination for High‐Performance All‐Perovskite Tandem Solar Cells 1.00
Unlocking the Power of Lewis Basicity in Oxide Lattice Oxygens: A Regulating Force for Enhanced Oxygen Evolution Kinetics in Li‐Osub2/sub Batteries 1.00
Symmetry Breaking Enabled Stable Oxygen Redox in Li‐Rich Cathodes via π‐Type Interaction 0.92
Regulating the Nanosheets Structures in Pitch‐Derived Amorphous Carbons for Efficient Sodium‐Ion Storage 1.00
Optimizing Electronic Structure to Achieve High‐Capacity and Long‐Life Layered Oxide Cathode for Potassium‐Ion Batteries 1.00
Accessing Metal‐Containing Species in Tin–Lead Perovskite Precursor Solutions via Molecular Strategies Guided by the Hard–Soft Acid–Base Principle 0.20
Ambient Processing of High‐Efficiency Organic Solar Modules Enabled by Radical Scavengers 1.00
Donor–Acceptor Porous Aromatic Framework Cathode with Fast Redox Kinetics for Ultralow‐Temperature (−70 °C) Potassium‐Organic Batteries 1.00
Tailoring Low‐Miller‐Index Crystal Facets Realizes Perovskite Solar Cells with Flat Grain‐boundary Grooves 1.00
Synergistic Regulation of Electrolyte and Electrode Structures Enhance Ammonium Vanadate Mg‐storage Performance for 100 mAh‐Level Mg‐ion Pouch Cells 1.00
Orchestrating Penta‐Element Interplay in Gradient‐Porous Carbons for Advanced Sodium‐Ion Hybrid Capacitors 1.00
Unraveling and Suppression of Multi‐Directional Planar Slipping and Microcracking in Single‐Crystal Co‐Free, Ni‐Rich Cathodes 0.87
Improving Charge Extraction and Operational Stability in Inverted Perovskite Solar Cells with Conjugated Block Copolymers 1.00
Simultaneous Charge Extraction Enhancement and Defect Passivation Via a Planar Conjugated Molecular Interface Enable 22.49%‐Efficient Inorganic Perovskite Solar Cells 1.00
Tailoring Dual‐Site Defect Passivation Molecules to Minimize Buried Interface Energy Loss for Highly Efficient and Stable Perovskite Solar Cells 1.00
Decoupling Roles of Cationic Dimensionality and Valence‐Electron Compatibility on Structural Resilience and Kinetics in High‐Entropy Prussian Blue Cathodes for Sodium‐Ion Storage 0.89
Electronic Cloud Topology‐Driven Electrostatic Decoupling: To Suppress High‐Voltage Parasitic Reactions of Phosphate Cathode in Sodium‐Ion Batteries 1.00
Tailoring Lattice Oxygen Redox and Robust Structure Stability in High‐Entropy Superlattice Layered Cathode for Superior Potassium‐Ion Storage 0.80
Bimolecular Synergy Reshapes the Interfacial Reactivity of Wide‐Bandgap Perovskites 1.00
Chiral Aza‐Helicene Phosphonic Acids for Stabilizing Efficient Perovskite‐Silicon Tandem Solar Cells 1.00
Ultraviolet‐Controlled Radical Dopants: Suppressing Unpredictable Oxidation and Lithium Migration in Perovskite Solar Cells 1.00
Bipyridine–Thiosumanene Isomeric Lewis Bases for Synergistic Defect Passivation and Hole Extraction Enables Over 26% Efficient Perovskite Solar Cells 0.91
Dissected MACl Involved Reaction Pathway for Low Temperature Fabrication of High‐Efficiency Flexible Perovskite Solar Cells 1.00
Suppressing the Interface Photodegradation towards Efficient and Stable All Perovskite Tandem Solar Cells 1.00
Enhancing the Built‐In Electric Field of Thickness‐Insensitive Small Molecule Cathode Interlayers for High‐Efficiency and Stable Organic Solar Cells 1.00
Surface Halide Manipulation for Stable Inorganic Perovskite Solar Cells and Modules 0.92
Homogenized Self‐Assembled Molecules for Inverted Perovskite Solar Cells 0.95
Utilizing the Mn(II) Dissolution-Induced Vacancy for Optimum Mg2+ Storage of Spinel Mn3O4 1.00
Interface Engineering of Branched PdCoPx Nanostructures for High-Performance Lithium–Oxygen Batteries 1.00
Fluorination-Assisted Interfacial Dipole for CsPbI3 Perovskite Solar Cells with Over 22% Efficiency 1.00
Employment of scpl/scp‐Citrulline as an Effective Molecular Bridge for Regulating the Buried Interface of Perovskite Solar Cells to Achieve High Efficiency and Good Stability 1.00
A Universal P‐Type Heterointerface for Inverted Perovskite Solar Cells 1.00
Stabilizing the Quinoidal Form of Polycyclic Aromatic Hydrocarbons by O─B←N Units to Give a > 1000 nm Redshift in the Absorption Wavelength 1.00
Mechanically and Chemically Co‐Robust Ni‐Rich Cathodes with Ultrahigh Capacity and Prolonged Cycle Life 1.00
Tuning the Crystallization and Photothermal Aging Chemistry of CsPb0.4Sn0.6I3 for Inorganic Perovskite Tandem Photovoltaics 1.00
On the Role of Molecular Conformation of the Passivating Agents for High‐performance Perovskite Solar Cells 1.00
Epitaxially Grown Lattice-Coherent Surface Enabling Superior Mechanical Integrity for High-Voltage LiCoO2 Cathode 0.63
Modulating Electric Double Layers via Polymer Electric Dipole Effects to Enhance Stability in Quasi‐Solid‐State Sodium Metal Batteries 1.00
Design of Intrinsically Stable Hole‐Selective Self‐Assembled Monolayers by Introducing Fused‐Ring Intramolecular Donor–Acceptor Interactions 1.00
Boosting Initial Coulombic Efficiency in Li‐Rich Mn‐based Cathodes by Tuning Orbital Hybridization 0.84
A Carboxylate‐based Hydrophilic Organic Photovoltaic Catalyst with a Large Molecular Dipole Moment for High‐Performance Photocatalytic Hydrogen Evolution 1.00
Halogen Bonding Enable Improved Performance and Stability of Dion–Jacobson Perovskite Solar Cells 1.00
Synergistic Dual‐Interface Engineering in Perovskite Solar Cells via Chloramine Hydrochloride Molecular Bridges 1.00
Self‐Assembled π‐Conjugated Hole‐Selective Molecules for UV‐Resistant High‐Efficiency Perovskite Solar Cells 1.00
Corrosion of Calcium Metal in Ca(TFSI)sub2/sub/DMAc Electrolyte and its Solution via Alloy Interface and Competitive Solvation 1.00
In Situ Cation Exchange Enables Air‐Processed Inverted Perovskite Solar Cells with over 25% Efficiency and Enhanced Stability 1.00
Meticulous Design of High-Polarity Interface Material for FACsPbI3 Perovskite Solar Cells with Efficiency of 26.47% 1.00
Deciphering the Crystallographic Effect in Radially Architectured Polycrystalline Layered Cathode Materials for Lithium‐Ion Batteries 1.00
Multifunctional and Radii‐Matched High‐Entropy Engineering Toward Locally‐Regulable Metal Oxide Layers in Sodium‐Layered Oxide Cathode 1.00
Molecular Geometry‐Property Relationship of Benzodipyrrole‐Based A‐DA'D‐A Type Acceptors for High‐Performance Organic Solar Cells 1.00
Vinyl‐Functionalized Linear Alkyl Chains in Nonfullerene Acceptors Enable 19.2% Efficiency and Stable As‐Cast Organic Solar Cells 0.87
Enhanced Cycling Performance of Li‐Rich Oxide Cathode via a Vaccine Effect 1.00
Acridine‐Substituted‐Centronucleus Nonfullerene Acceptors Enables Organic Solar Cells with Over 20% Efficiency with Low Nonradiative Recombination Loss 0.89
Ionic Polarization-Driven Defect Engineering in Na4Fe3(PO4)2(P2O7) Cathode: Fast Charging and Ultra-Long Cycle Life of Sodium-Ion Batteries 1.00
Energetics Modulation for Efficient and Stable n–i–p Perovskite Solar Cells 0.88
Aminomethyl Phosphonic Acid as Highly Effective Multifunctional Additive for Modification of Electron Transport Layer and Perovskite in Photovoltaic Solar Cells 1.00
Stabilizing Surface Lattice On− (0 < n < 2) for Long-Term Durability of LiCoO2 0.94
Perovskite Homojunction Solar Cells by Buried Interface Engineering 1.00
Low-Entropy and Fast-Li+-Conducting Electrolyte With Cascade Reaction-Induced Robust Interphase for Fast-Charging Lithium Metal Batteries 1.00
Symmetry‐Breaking Strategy Yields Dopant‐Free Small Molecule Hole Transport Materials for Inorganic Perovskite Solar Cells with 20.58% Efficiency and Outstanding Stability 0.94
Robust Solid Electrolyte Interphase Engineered by Catalysis Chemistry Toward Durable Anode‐Free Sodium Metal Batteries 1.00
Electrolyte Chemistry Development for Sodium‐Based Batteries: A Blueprint from Lithium or a Step Toward Originality? 0.69
Competitive‐Coordination‐Induced Crystallization Regulation for Efficient and Stable Sn–Pb Perovskite Solar Cells 1.00
Synergistic Solvent and Composition Engineering of Perovskites for Tandems on Industrial Silicon 1.00
Achieving 32% Efficiency in Perovskite/Silicon Tandem Solar Cells with Bidentate-Anchored Superwetting Self-Assembled Molecular Layers 1.00
Highly Stable Sn─Pb Perovskite Solar Cells Enabled by Phenol‐Functionalized Hole Transporting Material 0.31
Metalized Porphyrin‐Based COFs for Conductive Porous Layers in Perovskite Solar Cells to Enhance Electron Injection, Defect Passivation, and Lead‐Protection 0.90
Ion‐Docking Effect Enabling Rechargeable High‐Voltage Magnesium–Iodine/Chlorine Battery 1.00
Revealing Collaborative Effects of Binary Additives on Regulating Precursor Crystallization Toward Highly Efficient Perovskite Solar Cells 0.99
Semiconductor Spacer with Donor‐Acceptor Structure Drives 2D Ruddlesden–Popper Perovskite Solar Cells Beyond 20% Efficiency 1.00
Guiding Design of Mn‐Rich Phosphate Cathodes with Less Intrinsic Antisite Defects 0.90
Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material 0.90
Achieving Buried Interface/Bulk Synergistic Passivation via Chlorophyll Derivative for Efficient Inverted Perovskite Solar Cells 0.80
Management of Intramolecular Noncovalent Interactions in Dopant‐Free Hole Transport Materials for High‐Performance Perovskite Solar Cells 1.00
Strategy Formulation for Mitigating Capacity Fading of Na‐Layered Oxides 0.38
A Self‐Catalysis System Coupled with Redox Mediator Effect for Ultra‐Long Cycle Life Li‐Osub2/sub Batteries 0.83
Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries 0.85
Surface Nonbonding Oxygen State Regulation for Reversible Anionic Redox Chemistry in Li‐Rich Mn‐Based Layered Oxides 1.00
Three Birds with One Stone: Triple Defect Passivation of Tris(2,2,2-trifluoroethyl) Phosphate Enables 25.69% Efficient Inverted Perovskite Solar Cells 1.00
Modulating Binding Strength and Acidity of Benzene‐Derivative Ligands Enables Efficient and Hysteresis‐Free Perovskite/Silicon Tandem Solar Cells 1.00
Electron Itinerancy Mediated by Oxygen Vacancies Breaks the Inert Electron Chain to Boost Lithium–Oxygen Batteries Electrocatalysis 1.00
Nucleation Engineering to Strengthen Interface Contacts in Single‐Crystal Perovskite Photovoltaics 1.00
Crystallization Modulation and Comprehensive Defect Passivation by Carbonyl Functionalized Spacer Cation Towards High‐Performance Inverted Perovskite Solar Cells 1.00
Unravelling the Oxygen Evolution Mechanism of Lithium‐Rich Antifluorite Prelithiation Agent Based on Anionic Oxidation 1.00
Electronic Localization Enables Long‐Cycling Sulfides‐Based All‐Solid‐State Lithium Batteries 1.00
Highly Ordered Polymorphism of Small Molecule Acceptor Delivering Efficient and Stable Binary Organic Solar Cells 1.00
Uniform Ion Flow Effect of Dynamic Electrostatic Shielding Layer for Facilitating Homogeneous Nucleation and Deposition on Aluminum Anode 1.00
Retarding Phase Segregation via Lattice Reinforcement for Efficient and Stable Perovskite/Organic Tandems 1.00
378 344.03
Energy optimization for data centers via carbon-aware multi-energy market coordination 0.83
Deep reinforcement learning-based energy scheduling for green buildings with stationary and EV batteries of heterogeneous characteristics 0.94
Value co-creation in the renewable energy-hydrogen-methanol chain: A complex network evolutionary game under multi-market contexts 1.00
Towards fairness and low-carbon operation of energy hub: A multi-objective optimization framework with energy–carbon bidirectional coupling and heterogeneous uncertainties 1.00
NPP-GPT: Forecasting nuclear power plants operating parameters using pre-trained large language model 1.00
Two-stage optimization scheduling strategy for virtual power plants considering the correlated uncertainty of distributed energy storage in extreme scenarios 0.71
Risk-averse co-optimization of virtual power plants in multi-markets considering scheduling costs and uncertainties of controllable loads 1.00
GEV distribution-enhanced Fourier diffusion model for extreme value capture in day-ahead photovoltaic scenario generation 0.80
Dual-scale optimization of integrated energy systems: a novel MAPPO-based approach for hybrid game equilibrium 0.83
Risk-preference-aware optimal scheduling and profit allocation of load aggregators and charging operators 1.00
Quantitative decoupling of electro-thermal degradation in PEMFCs: H₂ crossover through a single Sub-10 μm pinhole under asymmetric pressure 0.78
Collaborative risk-resistant distributionally robust dispatch and benefit allocation scheme for interconnected distribution systems 0.63
A novel nonlinear grey model with parameter estimation optimization and its application in wind power forecasting 1.00
Robust integrated-energy management of shared transmission systems for renewable fuels and refined oil considering decision-dependent pressure drop uncertainty 0.65
Assessing the maximum carbon reduction potential of regional power grids from grid operators' perspective 1.00
Distributionally robust planning method for cyber-physical distribution system based on the coordinated recovery of multi-type resilience resources 1.00
Stable methane dry reforming under fluctuating solar flux assisted by phase change thermal energy storage 1.00
A risk-averse multi-timescale stochastic integration framework for a community multi-energy system under correlated uncertainties 0.83
Distributed collaborative optimization for integrated energy system clusters: A power allocation strategy based on consensus algorithm and logistic function 1.00
Benefiting from solar: Optimal scheduling for solar electric buses with onboard PV auxiliary power 1.00
Generalized Nash equilibrium-based optimal configuration of hydrogen energy storage in island distribution networks considering economy, resilience, and low-carbon 1.00
Decision-focused learning integrated with data-driven robust optimization for energy management 1.00
Optimization design of hydrogen energy supported microgrid network capacity based on hydrogen energy equipment behavior pattern inversion under uncertain conditions 1.00
Coupled energy-transportation network resilience improvement strategy considering dynamic traffic flow distribution: Multi-type Mobile emergency resources collaborative scheduling 1.00
Edge-cloud collaboration-driven predictive planning of electric vehicle charging load for microgrids 0.86
Adaptive forecasting of photovoltaic power based on dual-type models’ ensemble and online error correction 1.00
Bi-level planning of data centers with coupled electricity-heat-computation system using data-driven scenario generation for representing uncertainties 0.80
Deep reinforcement learning real-time dispatch approach for cascade hydropower with hybrid pumped-storage mitigating photovoltaic uncertainties 1.00
Bi-level distributionally robust coordinated optimization of integrateed energy system and hydrogen refueling station based on stackelberg game 1.00
Real-time wind power forecasting using an evolving fuzzy system based on Multivariate Gaussian and Chebyshev mapping 1.00
Coordinated frequency regulation of fixed-variable speed pumped storage hybrid systems: an adaptive control framework integrating dynamic prediction and rolling optimization 0.80
A hybrid data-model driven approach for time-decoupled power flexibility aggregation of heterogeneous distributed energy resources 1.00
Offline inverse reinforcement learning for joint optimization of energy costs and demand charge in industrial PV-battery load systems 1.00
Load restoration strategy for post-disaster distribution networks considering cyber-physical-traffic coupling with multi-resource collaboration 1.00
A capacity renting framework for shared energy storage considering peer-to-peer energy trading among prosumers with privacy protection 1.00
Enhancing power grid resilience through weather-aware security constraints: A deep reinforcement learning approach with hybrid CNN-GRU architecture 0.89
Exploring the optimal size of grid-forming energy storage in an off-grid renewable P2H system under multi-timescale energy management 1.00
A comprehensive review of deep learning for solar nowcasting: Enhancing accuracy, reliability, and interpretability 0.60
Day-ahead electricity price forecasting method integrating multi-scale hypergraph features and dual-layer transformer 1.00
Physics-informed neural network for dynamic energy flow calculation in integrated electricity and gas systems 0.80
Charging electric buses with solar power under varying environmental temperatures and sunlight conditions 1.00
Techno-economic analysis of hydrogen-to-power, ammonia-to-power pathway with biomass-to-power integration 1.00
Low-carbon economic dispatch for microgrid-integrated charging stations: A cost-oriented bi-layer optimization framework 1.00
Adaptive home energy management based on PI-DRA-PPO for integrated electricity, hydrogen, and heat storage systems 1.00
RSynLLM: A risk-aware routing mixture-of-experts large language model for multi-energy load forecasting in large-scale distribution networks 0.88
Transforming adverse effect into beneficial outcome: A design strategy leveraging non-uniform flow for enhanced performance of PEM fuel cells 1.00
Power-to-hydrogen-ammonia coordination and planning for integrated energy systems with ammonia co-firing and waste heat recovery 0.91
Assessment of the provincial hydrogen potential through photovoltaic generation in China from the perspective of water resources limits 1.00
Operation optimization and configuration of a novel wide-power hybrid electrolytic water-to‑hydrogen system in response to fluctuations in renewable energy sources 1.00
Enhancing representative photovoltaic scenario extraction for multiple power stations with a shared-weight and adaptively fused graph clustering method 0.57
Multistage optimized planning for the alliance expansion of multiple island microgrids with shared hybrid energy storage systems: A Nash bargaining-based game approach 1.00
Matching daily wind speed patterns with grid demand: An offshore wind assessment framework integrating source-load similarity and resource abundance 1.00
Photovoltaic material selection and multi-objective building design optimization for enhancing energy performance of building integrated photovoltaics (BIPV) systems 1.00
A stochastic accommodation rate-constrained robust scheduling for renewable power systems 1.00
Two-layer coordinated operation of multi-energy system considering carbon-oriented collaborative pricing mechanism via two-stage stochastic programming approach 0.50
A digital twin framework for intelligent electric vehicle charging optimization in smart manufacturing systems 0.50
SMART-EV: a stochastic macroscopic DRL-based method for enhancing distribution network resilience via EV coordination 1.00
Energy storage capacity planning for cross-regional resource complementarity: a cooperative game framework 1.00
A dual-layer feature-selection transformer network for transferable probabilistic forecasting of PV power 1.00
Performance research of a liquid air energy storage system integrated with pressurized water reactor nuclear power plants 0.88
A hierarchical resilient economic dispatch strategy for multi-energy system under DoS attacks 0.63
Physics-informed baseline load estimation for high-frequency demand response 1.00
Optimal operation of grid-friendly megawatt-level ultra-fast EV charging stations: A review on constraints, objectives and algorithms for grid-interactive operation 1.00
Hierarchical fuzzy RL control strategy and economic evaluation for molten salt energy storage systems 1.00
Learning-to-optimize infused decentralized disaggregation for multi-entity technical VPP considering equity and privacy 1.00
AI-assisted design and optimization of novel asymmetric microchannel flow fields for proton exchange membrane fuel cells 0.90
Graph-based multi-agent reinforcement learning with an enriched environment for joint ride-sharing and charging optimization 0.67
Optimal operation strategy for building users considering asynchronous information release in multi-type demand response markets to mitigate building-grid interaction risks 1.00
New distributionally robust optimization framework and algorithm for energy hub scheduling integrating demand response programs under ambiguous prices and loads 1.00
Adaptive optimization algorithms for scheduling multiple battery energy storage systems in complex grid scenarios 1.00
QSTAformer: A quantum-enhanced Transformer for robust short-term voltage stability assessment against adversarial attacks 1.00
Enhancing resilience of electric vehicle charging management in hydrogen–electric coupled distribution networks: A risk-characterization multi-agent reinforcement learning approach 1.00
Fuzzy-neural-network-based model-free load frequency control of multi-area power systems with hybrid energy storage under wind penetration 1.00
Optimization scheduling model incorporating multivariate trapezoidal fuzzy parameters under wind power fluctuation patterns classification 1.00
A physics-based design rule for boosting PEMFC performances via gradient catalyst layer designs 1.00
Multi-objective hybrid game-theoretic framework with distributionally robust chance constraints for multi-energy microgrid energy management 1.00
Spatially dependent sampling of component failures for power system preventive control against hurricanes 0.80
An intuition-based uncertain variable reduction approach for robust optimization in power systems 1.00
Distributionally robust scheduling of electric‑hydrogen integrated energy systems based on pipeline-road coordinated hydrogen transportation 0.90
Coordinated design of multi-stakeholder distributed energy systems with flexible demand resources from an energy-sharing perspective 1.00
Scheduling of electricity‑hydrogen integrated system under renewable energy sources uncertainty: Non-anticipativity and robust feasibility 1.00
Buildings-to-grid with generalized energy storage: A multi-agent decomposed deep reinforcement learning approach for delayed rewards 1.00
Efficient OPF calculations for power system reliability assessment based on state similarity 0.94
Spatiotemporal sparse autoregressive distributed lag model with extended Regressors for regional wind power forecasting 1.00
Distributionally robust optimization configuration of integrated photovoltaic and energy storage in rail transit green energy system 1.00
Distributed privacy-preserving optimization for multi-energy system considering carbon emission 1.00
Flexible operation of virtual power plant enabled integrated electricity-heating system under multiple uncertainties via distributionally robust model predictive control 0.50
Multi-task learning for solving OPF in an evolving environment 1.00
Co-optimize dispatch and pricing in market clearing problem to balance conflicting market objectives 1.00
Multi-agent heterogeneous graph reinforcement learning for electric vehicle routing and charging scheduling in coupled power-transportation networks 0.83
Systematic evaluation of transformer-based time series forecasting models for post-processing WRF-simulated wind speed and predicting short-term power output 1.00
Deep reinforcement learning based coordinated control for integrated energy system with photovoltaic, storage and electric vehicles considering transportation-power network couplings 1.00
Multi-stage resilience enhancement method for integrated power-thermal energy systems considering coordinated cyber-physical attacks 1.00
A bidding-clearing mechanism for electricity-hydrogen conversion system participation in coEA market 1.00
Portfolio selection and optimal planning for hydrogen energy storage systems composed of heterogeneous electrolyzer and fuel cell technologies in industrial park multi-energy systems 0.89
EV semi-dynamic routing and bidirectional dynamic wireless power transfer for service restoration in coupled traffic-power networks 1.00
Harvesting spatial-temporal load migration flexibility of data centers: A chance-constrained bi-level optimization model with endogenously formed risk-reflective locational prices 1.00
Multi-scale patch and frequency-domain gated learning for high-resolution day-ahead photovoltaic forecasting 0.57
Dynamic simulation-based fault evaluation and recovery for heat-electrical integrated energy system 1.00
Causes identification and sources localization method for multistage voltage sag under the influence of high penetration of renewable energy sources 1.00
Multi-market agency-based power procurement strategies for power grid companies using reinforcement learning 1.00
Game-based scheduling of mobile charging robots for electric vehicle charging: A relay-like scheme 1.00
Physically-bounded distributionally robust chance-constrained dispatch approach for power system with renewable power-to-ammonia 0.50
Coordinative multi-stage approach to railway energy system resilience enhancement: From risk-aware FTPSS planning to emergency energy management and adaptive train control 1.00
Multi-segment flexibility-based optimization scheduling for integrated energy systems coupled with electric and hydrogen fuel cell vehicles 1.00
Multi-phase location and capacity planning of electric-hydrogen charging stations with GCN in coupled power-traffic system 0.86
A multi-objective sorting rotation control strategy for hydrogen production system considering electrolyzer degradation and state transition 1.00
Optimal energy management at solar-integrated hubs for e-taxis with battery swapping and fast charging under power network constraints 1.00
A novel probabilistic wind power forecasting framework integrating similar curve matching mechanism and an enhanced conditional diffusion model 1.00
Explicit modeling of multi-energy complementarity mechanism for uncertainty mitigation: A multi-stage robust optimization approach for energy management of hydrogen-based microgrids 1.00
Edge-based real-time tracking of carbon emission flow in power systems with dynamic network pruning 1.00
Quantitative assessment of voltage nonuniformity in 20 cell PEMFC stack for degradation mapping and health monitoring 1.00
Hierarchical reserve-based distributionally robust chance-constrained optimization for integrated electricity-heat systems during cold waves 0.88
A comparative analysis of optimizing hydrogen and battery shared energy storage in hybrid power generation systems 1.00
Data-driven remaining driving range estimation and analysis framework for electric vehicles under real-world conditions 1.00
Equilibrium allocation strategy of distributed ESSs balancing ecology and economics in DNs considering carbon taxation systems 1.00
Towards sustainable and resilient net/nearly zero energy buildings: A flexible energy framework integrating renewable energy, storage, and electric vehicles with grid-friendly interactions under uncertainties 0.25
A two-tier optimization framework for urban integrated energy systems incorporating PSO-LSTM data-driven prediction and low-carbon demand response 0.75
Active distribution network operation optimization problem for hybrid energy storage systems containing abandoned mine pumped storage-battery storage: an improved artificial protozoa optimization algorithm 1.00
A semi-uniform pricing method for VPPs in electricity markets based on power-reserve flexibility regions 0.80
Robust photovoltaic forecasting under severe data missingness via multi-domain collaboration and covariate interaction 0.67
Stackelberg-game-based energy optimization strategy for interactive energy use of flexible manufacturing industrial parks 1.00
Assessment of future photovoltaic power potential across the Qinghai-Tibet Plateau from the perspective of energy demand 0.83
Electricity-hydrogen coupled energy storage bilevel optimization for offshore wind-powered zero‑carbon port microgrids considering multiple uncertainties 0.57
Investment suitability assessment and multi-attribute decision-making research for wind-photovoltaic‑hydrogen-storage integrated project based on GIS and cloud weighted power Heronian mean operator 1.00
A novel theoretical optical efficiency limit estimation model guiding parameter design of solar power tower heliostat fields with pattern-free layout 1.00
Integrating multiphysics modeling and machine learning for enhanced efficiency and thermal management in PEM water electrolyzer systems 1.00
Understanding spatiotemporal dynamics of V2G participation in megacities: A data-driven study 0.83
Tri-level collaborative optimization strategy for coupled power and transportation networks considering energy scheduling of fast charging stations 1.00
Decarbonizing power generation through Iron-based fuel cycles: A thermodynamic and thermo-economic analysis 1.00
Study on the retrofit of coupled Carnot battery in retired coal-fired power units for grid energy storage transformation 1.00
The flexibility of a molten salt thermal energy storage (TES)-integrated coal-fired power plant 1.00
Distributed cooperative scheduling for distribution network and smart charging hubs driven by unbalanced distribution locational marginal price 0.83
Modeling and analysis on the voltage-mediated flexibility control of a low-voltage DC building energy system 1.00
Multi-distribution fusion based Bayesian deep neural network for short-term probabilistic electricity price forecasting 1.00
Optimizing integrated energy systems: A multi-scenario scheduling approach with stepped carbon trading and two-stage hydrogen production under uncertainty 1.00
Dual-timescale frequency-domain multi-energy circuit method for dynamic modeling and analysis of SOFC stacks 1.00
A two-stage optimization framework for EV charging station planning considering investment cost and service satisfaction 1.00
AI-driven sustainable energy saving: Pathways for enhancing energy efficiency in Chinese listed firms 1.00
The techno-economic analysis of hybrid coastal and offshore ocean energy system for the smart charging of cross-harbour zero-emission ferries and electric vehicles 1.00
Distributed robust cooperative optimization of multi-integrated energy systems based on variational inequality-driven non-cooperative game theory 0.50
A review of solar dish applications: thermal utilization, thermochemistry, polygeneration and multi-energy complementary systems 1.00
Mass transfer evaluation of full-scale PEMFC and flow field optimization based on the brachistochrone principle 1.00
Ultra-short-term photovoltaic power prediction based on ground-based cloud images: A review 1.00
An innovative coordinated control strategy for frequency regulation in power systems with high renewable penetration 0.75
From baseload to flexibility: A cost-driven evolutionary model for thermal power industry at various stages of the China's “dual carbon” policy 1.00
Curriculum-based deep evolutionary learning for large-scale grid look-ahead transient stability preventive dispatch 1.00
Institutional coordination expansion in power sector reshapes renewable energy system layout and trans-administrative region power grid 1.00
Integrating process-level production scheduling into bidding strategy of steelmaking in multiple electricity markets 1.00
Accelerating energy storage deployment in China: incentive alignment and regional policy incentives 1.00
LLM-coordination in auto-bidding of frequency regulation: Cross-attention distributional reinforcement agentic learning 0.40
A cross-domain information fusion method for non-stationary distributed photovoltaic forecasting 0.83
Optimizing electric bus charging station locations: An integrated land-use and transportation approach 0.60
Spatiotemporal potential and economic assessment of highway slope-based photovoltaics: A case study in Jiangxi, China 1.00
CPLLM-WPF: A multi-scale prompting framework for generalizable wind power forecasting with LLMs 0.83
Coordinated operation of multi-energy microgrids considering green hydrogen and congestion management via a safe policy learning approach 0.14
Coordinated operation of alternative fuel vehicle-integrated microgrid in a coupled power-transportation network: a Stackelberg–Nash game framework 0.57
Quantitative analysis of multi-energy coupling: Indicator set and influence on IES region 1.00
A spatial-temporal scheduling framework for EV charging with multi-mode coordination and user subjective uncertainty 1.00
Dynamic-parameter physics-informed neural networks for short-term photovoltaic power prediction: Integrating physics-informed and data driven 1.00
Edge computing-based distributed power restoration for active distribution networks considering switching sequence 1.00
Superconducting hydrogen-electricity multi-energy system for transportation hubs: Modeling, technical study and economic-environmental assessment 0.90
Interdependence modeling of wind farm frequency support feasible region: A non-iterative system-wide dynamic characteristics scheduling 1.00
LearnAMR: Learning-based adaptive model predictive control enhanced by reinforcement learning for optimizing energy flexibility in building energy systems incorporating demand-side management 0.50
Energy storage configuration in transactive distribution systems incorporating integrated network flexibility 1.00
Reverse current evolution during fuel cell start-up: Integrating high-resolution segmented current measurement with quasi-2D equivalent circuit modeling 1.00
Large-scale model driven real-time economic generation control for integrated energy systems 1.00
An improved cross-carrier MED model for integrated electricity and natural gas systems: Economics, transparency, and privacy 0.40
Load forecasting under distribution shift: An online quantile ensembling approach 1.00
A multi-level isobaric hydrogen-electric coupled energy storage system with a wide-range operational strategy: enhancing efficiency and flexibility in renewable-dominated power grid 1.00
Dynamic characteristics and load regulation strategies of a novel combined system based on solar‑hydrogen complementary utilization 1.00
AGC signal feature-driven bidding and control coordinated optimization for user-side energy storage in frequency regulation market 1.00
Wind-solar complementarity in the Northwest Pacific: Implications for renewable energy planning and policy guidance 1.00
A novel two-phase piecewise economic dispatch model for wind-penetrated power systems using stability-constrained partition strategy 1.00
Coordinated robust configuration of soft open point and energy storage systems for resilience enhancement of integrated multi-energy system at ports 1.00
Transfer learning-based multi-energy load forecasting method for integrated energy system with zero-shot 1.00
Data-driven multi-stage distributionally robust scheduling for coupled electricity-hydrogen-refinery systems 1.00
MiniRocket-MARL synergy for storm tide resilience: MESS-DV enhanced recovery in coastal distribution networks 1.00
Onboard photovoltaic-energy storage system integration in high-speed trains: Economic-environmental optimization via IGWO-WOA algorithm 0.75
Wind power prediction using foundation large time series models enhanced by time series prompt in exogenous and tuning forms 1.00
Hybrid multi-agent deep reinforcement learning for multi-type mobile resources dispatching under transportation and power network recovery 1.00
Development of a compound power generation model for bifacial photovoltaic modules under partial shading conditions 1.00
An online probabilistic combination framework for power load forecasting under concept-drifting scenarios 0.50
Heterogeneous graph-enhanced approach for demand response potential modeling: Mining load flexibility from user micro-behavioral patterns 0.92
Dual stochastic multi-stage robust optimization of integrated energy system considering long medium and short-term uncertainties 1.00
A stochastic optimization framework for short-term peak shaving in hydro-wind-solar hybrid renewable energy systems under source-load dual uncertainties 0.88
Comparative techno-economic analysis of large-scale underground hydrogen storage 1.00
Stochastic robust optimization scheduling for integrated energy system cluster based on data-driven method 1.00
Spatio-temporal feature amplified forecasting framework for uncertain power tracking of multitype renewable energy and loads 1.00
Improving energy management efficiency of regional integrated energy system: A novel multi-agent reference dependence-based framework with green certificates allocation-transaction strategy 1.00
A comprehensive investigation on the effect of hydrogen concentration on the consistency of high-power multi-cell stacks 1.00
Enhancing solar energy generation utilization along highways: optimizing electric vehicle charging-swapping schemes and scheduling mobile energy storage systems 1.00
A two-stage distributionally robust low-carbon operation method for antarctic unmanned observation station integrating virtual energy storage and hydrogen waste heat recovery 0.80
High-dimensional scenario generation method joint-driven by multiple correlations for hydro-wind-photovoltaic 0.86
Charge-discharge hierarchical-multi-stage decoupling optimization for large-scale EVs interacting with volt/var control in distribution systems 0.71
An accurate quantification study on the rooftop PV potential based UAV field photography in dense urban environments 0.78
Anode nitrogen content estimation and purge strategy optimization of fuel cell system 1.00
Multi-objective optimization design and numerical analysis of air-cooled proton exchange membrane fuel cell with bamboo flow field based on neural network model 1.00
MFFDM-WLS: A multi-granularity feature-based coherent forecasting method for temporal hierarchical wind speed time series 1.00
Unlock the energy flexibility resources of zero-emission vehicles to simultaneously alleviate the negative impact on grid and traffic between remote buildings with predictive controls 1.00
Reversible solid oxide electrolyser for energy storage: levelized cost of storage estimation 0.42
PEM fuel cell platinum distributions optimization under typical scenarios utilizing multiple health and efficiency indicators 1.00
Two-stage decentralized coordinated deloading control of large-scale wind farm with adaptive kinetic energy storage method 1.00
Safe-AutoSAC: AutoML-enhanced safe deep reinforcement learning for integrated energy system scheduling with multi-channel informer forecasting and electric vehicle demand response 0.71
The physical-encoded Photovoltaic forecasting method combined with continuous learning and multi-digital twins mechanisms 0.80
Optimal charging schedules for EV charging stations considering hybrid smart and uncontrolled charging: A scalable framework 0.50
A resilience-oriented optimization framework for smart grid operation and recovery before, during, and after natural disasters 0.80
Spatial planning for China’s renewable energy expansion toward 2030 1.00
Thermal-water-electrical coupling modeling of PEMFC and its dynamic performance analysis under different operating conditions 0.89
Probabilistic assessment method for evaluation of adjustable capacity of electric vehicle charging stations for volt–var control in distribution networks 1.00
Breaking time-scale boundary: An optimization framework for improving multi-timescale operation characteristics of pumped storage power plant 0.88
Multi-dimensional data processing and intelligent forecasting technologies for renewable energy generation 1.00
Coordinated scheduling and carbon flow tracing of discrete manufacturing processes with integrated energy-material-carbon flows model 0.67
Interpretable short-term electricity load forecasting considering small sample heatwaves 1.00
Deep Q-network based battery energy storage system control strategy with charging/discharging times considered 1.00
Hierarchical optimal scheduling of electricity-hydrogen integrated energy systems via collective neurodynamic optimization 1.00
Electricity-hydrogen-heat coupled sharing for multi-energy buildings: A game theoretic approach 1.00
Risk-based data-driven energy management for integrated electrical and hydrogen microgrids with improved hydrogen vehicle charging prediction 1.00
Joint planning of distribution and transmission system for offshore wind farms integrated with hydrogen production platforms 1.00
Optimized hybrid hydrogen-battery storage planning for Island microgrids: A TSA-THC approach for addressing multi-time-scale imbalances 1.00
A hybrid approach involving data driven forecasting and super twisting control action for low-carbon microgrids 1.00
High-resolution modeling and multiscale experiment study of photovoltaic with reverse-biased cell 1.00
Controllable renewable energy scenario generation based on pattern-guided diffusion models 1.00
Multi-depot battery electric bus scheduling and charging coordination under resource limitations 1.00
Two-stage spatiotemporal decoupling configuration of SOP and multi-level electric-hydrogen hybrid energy storage based on feature extraction for distribution networks with ultra-high DG penetration 1.00
A multi-timescale blockchain-based virtual power plant trading framework for building integrated photovoltaic prosumers 1.00
Photovoltaic fluctuation-adapted dynamic network pruning for low-voltage distribution network edge computing 1.00
Causal neural network for carbon prices probabilistic forecasting 1.00
Prediction optimization fusion learning-based approach for day-ahead carbon aware scheduling in distribution network 1.00
A hybrid correction framework using disentangled seasonal-trend representations and MoE for NWP solar irradiance forecast 0.83
Aggregator-driven optimisation of electric vehicle charging stations in Shenzhen: Synergising smart charging, renewable energy integration and energy storage 1.00
Using Mobile soft open points to enhance power balance capability between LVDNs through mobility multi-stage optimization 0.83
Sinusoidal waveform modulated voltage supply for current improvement of water electrolyzers based on multi-physical dynamics 1.00
Low-carbon traffic resilience-enhanced robust planning of coupled transportation and power distribution network based on modified user equilibrium model 0.58
Hybrid optimization of EV charging station placement and pricing using Bender’s decomposition and NSGA-II algorithm 1.00
Evaluating the carbon-emission reduction potential of employing low-carbon demand response to guide electric-vehicle charging: A Chinese case study 1.00
Capacity credit evaluation of generalized energy storage considering strategic capacity withholding and decision-dependent uncertainty 0.50
Long-term efficient energy management for multi-station collaborative electric vehicle charging: A transformer-based multi-agent reinforcement learning approach 1.00
Disturbed security-constrained and time-variant optimal power flow for dynamic power system based on chaotic-genetic-centroid puffin optimization 1.00
A novel data-driven multi-step wind power point-interval prediction framework integrating sliding window-based two-layer adaptive decomposition and multi-objective optimization for balancing prediction accuracy and stability 1.00
Data-driven control, optimization, and decision-making in active power distribution networks 0.25
Acceptable cost-driven multivariate load forecasting for integrated coal mine energy systems 1.00
Research on the classification and evaluation of large-scale user load patterns for grid supply–demand balance regulation demands 1.00
Token-specific deep reinforcement learning for energy-efficient capacitated electric vehicle routing problems 1.00
Collaborative planning of hydrogen refuelling stations and DRGs in ADN for distributed energy consumption and flexibility enhancement 1.00
A tri-level planning strategy for integrated power and transport systems incorporating EV elastic charging behaviors 1.00
Coupled experimental-numerical analysis of energy harvesting dynamics of tidal stream turbine: Synergistic effects of operational status and morphological evolution in wave-current environments 0.67
Online probability density prediction of wind power considering virtual and real concept drift detection 1.00
Capacity adequacy assessment and pricing for power systems with high penetration of renewable energy 0.75
Market-government dual-driven framework for reliability-centric planning of a computation-energy integrated system with data centers 1.00
Uncertain operation region of electricity-hydrogen virtual power plant: Concept and description method 0.83
A Distributionally robust game approach for integrated energy systems with prosumer interactive transactions 1.00
PVMTF: End-to-end long-sequence time-series forecasting frameworks based on patch technique and information fusion coding for mid-term photovoltaic power forecasting 1.00
Spatiotemporal coordination of electric vehicle traffic and energy flows in coupled power-transportation networks with multiple energy replenishment and vehicle-to-grid strategies 0.89
A review of predictive uncertainty modeling techniques and evaluation metrics in probabilistic wind speed and wind power forecasting 0.86
Credible demand response capacity evaluation for building HVAC systems based on grey-box models 1.00
Two-stage optimization configuration of shared energy storage for multi-distributed photovoltaic clusters in rural distribution networks considering self-consumption and self-sufficiency 1.00
Collaborative optimization of battery electric bus scheduling and charging considering arterial signal coordination under connected environment 0.83
Online incremental probability power prediction for distributed PVs in heterogeneous and dynamic data environments 1.00
Entropy state calculation model for integrated energy systems 1.00
Short-term optimal scheduling of hydro–wind–PV and multi-storage complementary systems based on opposition-based learning PSO algorithm 1.00
A novel stable grand coalition for transactive multi-energy management in an integrated energy system 1.00
Deep learning-based distributionally robust joint chance constrained distribution networks PV hosting capacity assessment 0.80
Resilience-oriented soft open point deployment with topology-variable-based frequency stability constraints for distribution networks 1.00
Advancing EV fast charging: Addressing power mismatches through P2P optimization and grid-EV impact analysis using dragonfly algorithm and reinforcement learning 0.40
Amplify seasonality, prioritize meteorological: Strengthening seasonal correlation in photovoltaic forecasting with dual-layer hierarchical attention 1.00
Unlock the flexibility for cooperative operation of hydrogen providers under transportation delay 1.00
Fuzzy optimal scheduling of hydrogen-integrated energy systems with uncertainties of renewable generation considering hydrogen equipment under multiple conditions 1.00
Managing long-term operation of cascade hydropower plants under energy transition with physics-constrained long-short term memory networks 1.00
Carbon cap based multi-energy sharing among heterogeneous microgrids using multi-agent safe reinforcement learning method with credit assignment and sequential update 0.60
Non-intrusive load monitoring based on process-adaptive multi-target regression and transformer-enabled two-stream input network 0.67
Integration of a salt cavern for large-scale hydrogen storage into a solar-wind-storage power system: Technical and economic advantages 1.00
Towards net-zero: Coupling carbon mineralization with seasonal energy storage in integrated energy systems planning 0.83
Dynamic performance of an innovative multi-port heat recovery in megawatt-class PEM fuel cell cogeneration system 1.00
A joint sharing-sharing platform for coordinating supply and demand resources at distributed level: Coupling electricity and carbon flows under bounded rationality 1.00
Data center load modeling through optimal energy consumption characteristics: A path to simultaneously enhance energy efficiency and demand response quality 1.00
Sharing energy in wider area: A two-layer energy sharing scheme for massive prosumers 0.86
Online decoupling feature framework for optimal probabilistic load forecasting in concept drift environments 1.00
Design and optimal scheduling of a forecasting-based wind-and-photovoltaic complementary electrolytic hydrogen production system 1.00
TSO-DSOs coordinated framework for provision of flexibility in coupled power-transportation network 0.67
MMGPT4LF: Leveraging an optimized pre-trained GPT-2 model with multi-modal cross-attention for load forecasting 1.00
A novel perspective for equivalent aggregation of wind farm: Measuring the dynamic similarity between output time-series 1.00
Model predictive control of wind turbine based on deep-dive holistic observer of tower top IMU 1.00
Interpretable wind speed forecasting through two-stage decomposition with comprehensive relative importance analysis 1.00
A deep-learning approach for modeling the demand function of air conditioning resources with respect to the electricity prices 1.00
Data-driven co-optimization method of eco-adaptive cruise control for plug-in hybrid electric vehicles considering risky driving behaviors 1.00
Hydrogen production performance optimization for direct-coupled photovoltaic electrolysis systems based on a novel 3D opto-electro-thermal model 1.00
Energy-carbon pricing-guided collaborative optimization for local integrated energy communities with multi-vector electrification consumers 0.67
A multi-scenario distributionally robust model for resilience-oriented offshore wind farms and transmission network integrated planning considering typhoon disasters 1.00
Distributed dispatch of non-convex integrated electricity and gas systems considering AC power flow and gas dynamics 1.00
Integrated charging scheduling and energy management for electrified-autonomous flexible transit with energy storage systems design 1.00
Risk-informed resilience planning of transmission systems against ice storms 0.67
A real-time scheduling framework of cascade hydropower-photovoltaic power complementary systems based on model predictive control 1.00
Optimal management of coupled hydrogen-electricity energy systems at ports by multi-time scale scheduling 0.85
On the dual-resource overnight charging problem of battery electric buses 0.50
A bi-level optimization strategy for flexible and economic operation of the CHP units based on reinforcement learning and multi-objective MPC 1.00
A Li-O2 battery model coupled with LiO2 and Li2O2 reveals regulation mechanism of deposited product composition on mass transport and electron transfer 1.00
A photovoltaic power forecasting framework based on Attention mechanism and parallel prediction architecture 1.00
Decision-making and cost models of generation company agents for supporting future electricity market mechanism design based on agent-based simulation 1.00
Integrating hourly quasi-input-output into multi-city power system planning considering spatio-temporal emission variations 1.00
India's residential space cooling transition: Decarbonization ambitions since the turn of millennium 0.63
A novel probabilistic carbon price prediction model: Integrating the transformer framework with mixed-frequency modeling at different quartiles 1.00
A GIS-based techno-economic comparative assessment of offshore fixed and floating photovoltaic systems: A case study of Hainan 1.00
Price-function-free energy pricing in Bilevel peer-to-peer energy markets considering network security 1.00
Interaction strategy for grid-hydrogen-vehicle system in extreme heat scenarios: Hybrid system dynamics and Bilevel optimization approach 1.00
A group-based optimization design for PV-BESS in energy-sharing hybrid communities 1.00
An active power control of DFIG-based wind turbine generators for frequency regulation with expected dynamic performance 1.00
An effective reserve capacity optimization method for power systems considering operational reliability with weather conditions 1.00
Resilience enhancement for power distribution networks in coordination with electric vehicle fleets 1.00
Multi-objective optimization of operational strategy and capacity configuration for hybrid energy system combined with concentrated solar power plant 1.00
Performance assessment of solar-driven electrolytic hydrogen production systems enhanced by CdTe PV and sun-tracking device 0.80
Stability framework for off-grid hydrogen production systems: Coordinated control of steady-state source-load balancing and transient frequency response 1.00
Adaptive infinite-horizon control of hybrid EV/FCEV charging hubs: A large-model based deep reinforcement learning approach 0.75
Understanding the synergy of energy storage and renewables in decarbonization via random forest-based explainable AI 1.00
Research on interaction between HEMS-VPP and power system with high renewable energy penetration under net zero emissions: Operation strategy and economy viability boundary 1.00
Evaluation on solar-biogas heating system for buildings: Thermal characteristics and role of heat storage sectors 1.00
A Bilevel robust coordination model for community integrated energy system with access to HFCEVs and EVs 0.79
Practical modeling and operation optimization of dual-battery portable energy storage systems for low temperatures 1.00
A joint optimal clearing model for energy, inertia and ramping in power systems considering multiple time scales 1.00
Bi-level energy co-optimization of regional integrated energy system with electric vehicle to generalized-energy conversion framework and flexible hydrogen-blended gas strategy 1.00
P2P energy trading of multi-energy prosumers: An electricity-heat coupling double auction market 1.00
A comprehensive review on renewable power-to-green hydrogen-to-power systems: Green hydrogen production, transportation, storage, re-electrification and safety 1.00
Optimal charging scheduling of an electric bus fleet with photovoltaic-storage-charging stations 0.67
Primary frequency regulation performance in hydropower systems: Precise quantification and holistic enhancement under wide-range operation 1.00
Study on performance enhancement and modeling of air-cooled proton exchange membrane fuel cell for different runner structure 1.00
Enhanced photovoltaic-powered distribution network resilience aided by electric vehicle emergency response with willingness and reward 1.00
City-scale roadside electric vehicle parking and charging capacity: A deep learning augmented street-view-image data mining and analytic framework 0.43
Experimental study of cold start of PEM fuel cell with non-uniform metal foam flow field 1.00
Energy and environmental performance of iron and steel industry in real-time demand response: A case of hot rolling process 0.80
Integrating user preferences and demand uncertainty in electric micro-mobility battery-swapping station planning: A data-driven three-stage model 0.67
Electromechanical modeling of advanced adiabatic compressed air energy storage system compressed charging unit: Incorporating compressor dynamical performance under variable operating conditions 1.00
Multi-objective electric-carbon synergy optimisation for electric vehicle charging: Integrating uncertainty and bounded rational behaviour models 1.00
Coordinated central-local control strategy for voltage management in PV-integrated distribution networks considering energy storage degradation 0.80
Resilient mobile energy storage resources-based microgrid formation considering power-transportation-information network interdependencies 0.71
Event-triggered security-constrained energy management scheme on shared transmission systems for renewable fuels and refined oil: Implementation and field tests in South China 0.79
Short-term optimal scheduling and comprehensive assessment of hydro-photovoltaic-wind systems augmented with hybrid pumped storage hydropower plants and diversified energy storage configurations 1.00
Market scheduling of emission-aware smart prosumers in smart grids: A multi-objective bi-level approach 0.75
A coordinated optimization strategy for Charging Station siting and EV dispatch based on response costs: A case study of Chicago 0.60
Carbon-aware day-ahead optimal dispatch for integrated power grid thermal systems with aggregated distributed resources 1.00
A physics-guided self-adaptive chiller sequencing controller of enhanced robustness and energy efficiency accommodating measurement uncertainties 1.00
Stable energy management for highway electric vehicle charging based on reinforcement learning 1.00
Soft costs and EVSE – Knowledge gaps as a barrier to successful projects 0.07
Investigation of mass transfer characteristics of PEMFCs alternatively fueled by pure oxygen and air 1.00
Performance analysis and control-coordinated improvement method for distance protection of energy storage station grid-connected lines 0.86
A planning method for park-level integrated energy system based on system integration theory 1.00
Deeply flexible commercial building HVAC system control: A physics-aware deep learning-embedded MPC approach 1.00
Day-ahead wind farm cluster power prediction based on trend categorization and spatial information integration model 1.00
Fast dynamic identification algorithm for key nodes in distribution networks with large-scale DG and EV integration 1.00
Joint chance-constrained energy-reserve co-optimization for distribution networks with flexible resource aggregators 1.00
A novel heat load prediction algorithm based on fuzzy C-mean clustering and mixed positional encoding informer 1.00
Design strategies for mainstream flow channels in large-area PEMFC: From typical units to large areas 1.00
Resilience-oriented planning for microgrid clusters considering P2P energy trading and extreme events 0.83
Multi-step short-term forecasting of photovoltaic power utilizing TimesNet with enhanced feature extraction and a novel loss function 1.00
Hierarchical distributionally robust scheduling strategy for distributed energy systems in the energy-sharing environment 0.63
An ADMM-based tripartite distributed planning approach in integrated electricity and natural gas system 0.80
Trade-off both in the clearing market and ancillary services markets for agriculture park operator: A strategic bilevel multi-objective programming 0.17
Flexible design and operation of off-grid green ammonia systems with gravity energy storage under long-term renewable power uncertainty 1.00
Experimental study on the operating state of high-power vehicular fuel cell system hydrogen supply subsystem with an in-situ ultrasonic-based gas component monitoring equipment 1.00
Synergizing regional thermal comfort: A precision demand response strategy for air conditioning systems with motor losses and power flow dynamics 0.88
Distributed state estimation of active distribution network considering mixed-frequency measurement data hierarchical encryption 1.00
Optimal robust allocation of distributed modular energy storage system in distribution networks for voltage regulation 1.00
A novel heliostat aiming optimization framework via differentiable Monte Carlo ray tracing for solar power tower systems 1.00
Load-sharing characteristics of lined rock caverns of compressed air energy storage system: A theoretical analysis 1.00
Optimization of the operational conditions of PEMFC by a novel CFD-DT-GA approach 1.00
Flexibility characterization and analysis of electric vehicle clusters based on real user behavior data 0.83
An improved heuristic dynamic programming framework for multi-source frequency regulation 1.00
Safe multi-agent deep reinforcement learning for decentralized low-carbon operation in active distribution networks and multi-microgrids 1.00
Coordination of integrated energy systems and transportation networks for cost-effective and flexible multi-energy management 1.00
Multi-stage adaptive expansion of EV charging stations considering impacts from the transportation network and power grid 0.75
Battery electric vehicle transportation network robust pricing-infrastructure location model with boundedly rational travelers 1.00
Internal and external coordinated distributionally robust bidding strategy of virtual power plant operator participating in day-ahead electricity spot and peaking ancillary services markets 1.00
Enhancing PV power forecasting accuracy through nonlinear weather correction based on multi-task learning 1.00
Multi-objective optimization of a virtual power plant with mobile energy storage for a multi-stakeholders energy community 0.67
Routing and scheduling of mobile energy storage systems in active distribution network based on probabilistic voltage sensitivity analysis and Hall's theorem 0.57
Bi-level Integrated Electricity and Natural Gas System retrofit planning model considering Carbon Capture, Utilization and Storage 1.00
An efficient approach for regional photovoltaic power forecasting optimization based on texture features from satellite images and transfer learning 0.80
Parallel-Execute-Based Real-time Energy Management Strategy for FTPSS integrated PV and ESS 1.00
Real-time optimal dispatch for large-scale clean energy bases via hierarchical distributed model predictive control 1.00
54 53.10
Reinforcing CsPbI3 all-inorganic perovskite grain boundaries through bilateral cyano-based molecular cross-linking for efficient and stable solar cells 1.00
Mitigation energy loss with fullerene derivatives doping regulation for efficient tin perovskite solar cells 1.00
The CuI/NiO gradient hole transport layer for enhanced carrier efficiency in large-area perovskite solar cell 1.00
Pyro-Phototronic Effect enhanced position-sensitive detection observed in ZnO nanowires/Ag2S quantum dots heterojunction 1.00
Targeted passivation via ammonium benzoate for suppressing deep-level defects of doctor-bladed CH3NH3PbI3 films 0.85
A dual-functional additive for crystallization regulated and defect passivated stable inverted perovskite solar cells 1.00
Flexible dual-heterojunction device design for high-performance photodetection and energy harvesting in self-powered visible light communication 1.00
Fluorination-enabled synergistic engineering of lattice and interface in Na2FePO4F cathode for enhanced sodium-ion storage 1.00
Improved interface contact and defect passivation for enhanced charge dynamics of perovskite photovoltaics 1.00
Lattice strain conversion suppresses ion migration to stabilize wide-bandgap perovskite solar cells 1.00
Dynamics of hydrogen bubble movement and oscillation on platinum microelectrodes during water electrolysis 1.00
Octylammonium iodide modification of electrodeposition-converted PbI2 for fabricating efficient and stable perovskite solar cells 1.00
Efficient conversion of near-field spherical waves to surface waves for microwave energy harvesting 1.00
A low-cost green mixed antisolvent strategy for strain-release and defect-reduction toward efficient perovskite solar cells 1.00
Molecular engineering of PEDOT:PSS for enhancing open-circuit voltage in organic/silicon heterojunction solar cells 1.00
Improving efficiency and water–oxygen barrier of perovskite solar cells through phenylalanine additives 1.00
Healing the buried interface with versatile glutamic acid for efficient and stable SnO2-based perovskite solar cells 1.00
Modulating ion transport via a Cu-MOF@Zein nanofiber-tailored separator for ultrastable and dendrite-free sodium-metal batteries 1.00
A hydrogen-bonding anchoring strategy for buried interface passivation toward enhanced efficiency and stability of inverted perovskite solar cells 1.00
Low-cost amorphous-nanocrystalline magnesium halide solid electrolytes 1.00
Multifunctional phosphonic acid additive enables efficient and stable inverted perovskite solar cells 1.00
Synergistic ion migration suppression and surface PbI2 etching via sputtered carbon barrier layer for n-i-p perovskite solar cells 1.00
Sulfide-reduction strategy for constructing bimetallic BiSb microrods toward high-performance potassium ion storage 1.00
Device physics of indoor photovoltaics: A fundamental investigation 1.00
Self-powered EA4Pb3Br10 ferroelectric perovskite photodetector for single-pixel imaging and encrypted optical communication 1.00
High-performance 2D indoor perovskite solar cells via ferroelectric-enhanced carrier separation 1.00
Lead-free perovskites for indoor photovoltaics 0.88
Enhancing long-cycle stability of CuFeS2/EG anode for sodium-ion batteries by mitigating crosstalk effect 1.00
Simultaneously upgrading the power conversion efficiency and the moisture resistance of perovskite solar cells by blending CsI into carbon-electrode 1.00
Mitigation of ordering constraints in P2-Na0.67Ni0.33Mn0.67O2 cathode via F doping for improved Na-ion storage 0.80
Enhanced air stability and cycling stability of P'2-type layered cathodes for sodium-ion batteries via Pb–Mg synergistic doping 1.00
Molecular coordination-driven interfacial engineering for high-efficiency CsPbI3 perovskite solar cells 1.00
Synergistically stabilized O3-type layered oxide cathodes via phase regulation of multi-cation doping enable high-performance sodium-ion batteries 1.00
Interfacial energy-level engineering with bilayer hole transport layers for suppressing phase separation in mixed-halide perovskites 1.00
Dipole engineering in self-assembled monolayers for efficient organic–silicon hybrid solar cells 1.00
Charge transfer rate modulated energy loss in indoor organic photovoltaic cells 0.95
Dual-functional Cu-MOF modifies buried interfaces for high-performance and stable MAPbI3 photodetectors 1.00
Guanidinium-mediated crystallization modulation for high-performance indoor flexible perovskite solar cells 1.00
Simultaneous enhancement of Na-ion diffusion and electronic conduction in Na3V2(PO4)2F3 cathode material by Ga doping and N-doped carbon 1.00
Recent progress in indoor photovoltaics based on all-inorganic perovskites 1.00
Effect of fluorine doping on the performance of manganese-titanium NASICON cathodes for sodium-ion batteries 1.00
Wide bandgap perovskite photovoltaic on rigid and flexible substrates for indoor light harvesting 0.67
Synergistic passivation of defects with a multifunctional additive for perovskite solar cells 1.00
Ammonium sulfamate enables multifunctional surface defect management for high-efficiency and stable perovskite solar cells 1.00
High-voltage metamorphic 1064 nm InGaAs multi-junction laser power converters 1.00
Defect passivated wide-bandgap perovskite films for high performance four-terminal perovskite/silicon tandem solar cells 1.00
Upper coherent interlayers using Cl-SnO2 for improved charge dynamics and efficient inverted perovskite photovoltaics 1.00
Synergistic crystallization and defect passivation via eco-friendly anti-solvent additives for air-processed high-performance perovskite solar cells 0.96
MoS2 encapsulated FeS2 composite anchored on graphite substrate for high-performance sodium-ion batteries 1.00
Synergistic regulation of SnO2 buried interface induced by alkyl chain length in polythiourea passivator for efficient perovskite solar cell 1.00
Tailoring carrier management through a multifunctional additive for efficient perovskite/organic tandem solar cells 1.00
Dual passivation in air for constructing high-efficiency wide-bandgap perovskite solar cell modules 1.00
Direct SMA-fed gradient-index metasurface array for efficient microwave power reception 1.00
Analyzing the capacity fading mechanism in high-capacity Cr8O21 as a cathode material for Li-ion batteries 1.00
60 58.42
One-pot synthesis of a FsGDY/Fe2O3 composite applied in lithium-ion batteries 1.00
In situ synthesis of self-standing SbBi-porous carbon fibers enabling ultra-stable sodium-ion storage 1.00
5-Acetylsalicylamide for defect passivation & crystallization regulation in inverted perovskite solar cells 1.00
The heat treatment mechanism in regulating the self-discharge behavior of Li/CFx primary batteries 0.89
A novel aqueous K2CO3 electrolyte enables high performance of FeS anodes in Ni–Fe batteries at both room and elevated temperatures 1.00
Dual-functional structural modulation for stabilizing sodium layered oxide cathodes 1.00
Dissociation of a protic ethyl mercaptan cosolvent enables better magnesium electrochemistry reversibility 1.00
Suppressing self-aggregation of self-assembled monolayers for high-efficiency inverted perovskite solar cells 1.00
Threonine: a universal single-molecule bifunctional modifier for efficient and stable perovskite solar cells and modules 0.89
Facile construction of a covalent triazine framework as an anode for ultra-long cycle life sodium-ion batteries 1.00
Oxygen-/sulfur-doped perylene-core quadruple helicenes with bright near-infrared fluorescence 1.00
A polyoxovanadate-based metal–organic framework unlocks the potential for advanced calcium-ion storage 1.00
Defect-rich molybdenum dioxide cluster coupled hierarchical carbon toward advanced Na–S batteries 1.00
Low-temperature heat treatment enhances the structural stability of O2-type lithium-rich manganese-based materials 1.00
Ultrathin covalent organic polymer-decorated reduced graphene oxide for enhanced sulfur conversion kinetics in Li–S batteries 1.00
Performance enhancement in SOECs with a novel waveform flow channel 0.60
Heteropoly acid-mediated electrochemically efficient removal of oxygen 1.00
Template-assisted epitaxial growth of (111)-dominated FAPbI3 for enhanced photovoltaic performance and stability 1.00
Probing the microstructural changes in Li-rich layered oxides induced by over-lithiation 1.00
Developments and prospects of conversion reaction-based anode materials in sodium-ion batteries 0.83
Crown ether-based interface modification for inverted perovskite solar cells with enhanced efficiency and stability 0.70
Anion-mediated regulation of open metal sites in metal–organic framework materials or high-performance solid-state electrolytes 1.00
Phase-selective redissolution enabling phase-pure 2D/3D perovskite solar cells 1.00
Stability of non-fullerene organic solar cells: a device engineering perspective 1.00
Enhanced lithium storage via Fe doping in V2O3/N-doped carbon hybrids: a stable insertion–extraction anode 1.00
An organoplatinum-bridged conjugated polymeric photosensitizer with a donor–acceptor structure for enhanced photodynamic efficiency and integrated tumour therapy 1.00
Investigation of spatial-dependent electrochemical performance in fluidized electrochemistry: the critical role of working electrode positioning 1.00
Soft/hard carbon nanofibers with a unique heterogeneous interface for sodium storage 1.00
Potassium optimization of sodium hydrogen vanadate thin nanosheets with superior performance for aqueous zinc-ion batteries 1.00
A dual-site doping strategy to enhance the sodium storage performance of an O3-type layered sodium oxide cathode 1.00
Fused-ring isomerization dopant-free hole transport materials for high-performance inorganic perovskite solar cells 1.00
Ionic conductor armored Li3V2(PO4)3: a robust electrode for lithium capture via capacitive desalination 1.00
A new interphase enabled by CaI2 and Ca(BH4)2 for reversible calcium metal anodes 1.00
Heterostructure CuSe/MnSe2 with Se vacancies for rapid ion kinetics for low-temperature sodium-ion batteries 1.00
A free-standing carbon foam for rechargeable Zn–air batteries 1.00
Enhancing the cycling stability of Co-free high-Ni layered cathodes through MgO surface engineering 1.00
Tuning the rate performance in O2-type layered manganese-based oxides through cobalt doping 1.00
Anthracene-terminated, self-assembled hole-transport monolayer for perovskite solar cells 0.80
An amorphous niobium pentoxide–carbon composite as a structurally stable high performance anode material for sodium-ion batteries 1.00
Revealing unusual storage failure of single-crystal high-nickel cathodes during high-temperature and high-humidity exposure 1.00
K+ doping-induced pillaring effect in Na3V2(PO4)3 for enhanced rate performance in sodium-ion batteries 1.00
iIn situ/i fast oxidation of spiro-OMeTAD hole transport layers under ambient indoor lighting compatible with air-processed perovskite solar cells 1.00
High-efficiency carbon-electrode CsPbIsub2/subBr solar cells prepared by double ion regulation of cadmium acetate additive 1.00
Coordination-tuned Na3V2(PO4)3 cathodes for low-temperature sodium-ion batteries 1.00
A bifunctional LaF3 doping strategy achieving coupled bulk and interfacial reconstruction for Ni-rich cathodes 1.00
Redefining the capacity limitation of Li–air batteries by uncoupling the competitive multiple-transport and nucleation 1.00
Expanding the conjugated benzene rings of phenothiazine phosphonic acid for efficient tin–lead mixed perovskite solar cells with a Sn/Pb ratio of 0.4 : 0.6 1.00
Bimetallic FeSe2/CoSe2 heterojunction nanoparticles anchored on porous N-doped carbon nanosheets for high-rate sodium-ion storage 1.00
Enhanced all-solid-state iron–air batteries via low-level K+ doping in iron oxide 1.00
Fluorescent hole-selective contact for ultraviolet-stable inverted perovskite solar cells 1.00
Buried interfacial passivation by multifunctional molecular bridge for blade-coating perovskite solar cells 1.00
Construction of layered Na0.44MnO2 cathode by facile Na+/K+ exchange strategy to enhance capacity 1.00
Boosting fast and stable sodium-ion storage in TiO2 by amorphization engineering and superstructure design 1.00
Composite SnO2–K2S ETL for energy level regulation and electron mobility enhancement in perovskite solar cells 1.00
Orthogonal decoupling of an ionic-electronic transport microarchitectured vertical array cathode for flexible sodium-ion batteries 0.82
Sr and Co co-doping stabilizes ultrahigh-nickel single-crystal cathodes for high-performance lithium-ion batteries 1.00
Fast synthesis of polyanionic materials for sodium-ion storage 1.00
A highly stable LiNO3/N-methylacetamide deep eutectic electrolyte for rechargeable Li–O2 batteries 1.00
Lattice Strain Control Mechanism of Geometric Adaptation Passivation for Efficient and Stable Perovskite Solar Cells 0.89
Supramolecular artificial light-harvesting systems incorporating aggregation-induced emissive components: from fabrication to efficient energy conversion 1.00
30 28.75
Tailoring electrolyte activity for a highly stable LiOH redox process in lithium–oxygen batteries 1.00
Moisture-driven discharge chemistry enables the fabrication of highly reversible magnesium–oxygen polymer batteries 1.00
Synergistic halide and phosphate ester electrolytes for overcoming corrosion and interfacial challenges in magnesium batteries 1.00
Micro-changes, macro-impact: enhancing hole transfer by tailoring peripheral substituents of hole transport materials for efficient perovskite solar cells 0.83
Thermal decomposition behavior and sustainable recycling of flexible perovskite solar modules 1.00
Spin-regulated d–p hybridization enables high energy density and wide temperature operation of Na3V2(PO4)2O2F-type cathodes for sodium-ion batteries 1.00
A donor–acceptor zwitterion as a self-assembled hole-selective layer for highly efficient tin-based perovskite solar cells 1.00
Frozen slab method mediated sulfur-affinitive single-atom catalysts for efficient reversible sodium storage 0.88
Designing wide-spectrum-responsive cathode catalysts with abundant active sites for high-performance photo-enabled lithium–oxygen batteries via band engineering 0.89
Exploring stacking pressure-induced mechanical failure of a Ni-rich cathode in sulfide solid-state batteries 1.00
A solid dual-salt plastic crystal electrolyte enabling rapid ion transfer and stable interphases for high-performance solid-state sodium ion batteries 1.00
Revisiting high-valence dopant mechanisms in Ni-rich cathodes: cation ordering dominates over morphological alignment for enhanced stability 0.89
Rigid-flexible coupling: exquisite modulation of asymmetrical spiro-type hole-transporting materials toward efficient and stable perovskite solar cells 1.00
In situ surface manipulation Mn-based Prussian blue analogues with enhanced redox chemistry and ion diffusion toward high-energy-density aqueous sodium-ion batteries 0.88
Stabilizing the oxygen anionic redox chemistry using a Li-deficient and Li-rich biphasic structure for high-energy Li-ion batteries 1.00
Interfacial chemistry regulation by orbital hybridization for superior kinetics of hard carbon in an ester-based electrolyte 0.89
Synergistic Cu-based catalysts with multiple active sites for high-efficiency Li–CO2 batteries 1.00
Designing mesostructured bimetallic selenide derived from room-temperature prepared metal–organic frameworks as a sodium-ion battery anode with high performance and fast reaction kinetics 1.00
Boosting planar perovskite solar cell performance via peripheral end-group engineering of phenoxazine-core hole transport materials 1.00
Multiple functional bulk passivator pyrimidine derivative stabilizing perovskite precursors for efficient carbon-based perovskite solar cells 1.00
Non-ionic fluorinated p-dopant enables efficient and stable perovskite solar cells 1.00
Synthetic control guided by growth mechanism insights enable tailored precursors for layered oxide cathodes 0.71
Rational phosphating layer design in biomass-derived hard carbons toward fast charging capability of sodium ion battery anodes 1.00
Unlocking zeolite-like structures as a new family of interstitial oxide ion conductors: insights into carrier trapping, collective local distortion, and correlated disorder 0.85
Valence state engineering in multi-heteroatom-doped PAHs: a strategy for tunable photophysical properties and phototheranostic potentials 1.00
Combined effect of high voltage and large Li-ion flux on decomposition of Li6PS5Cl 1.00
A universal strategy for bridging Prussian blue analogues and sodium layered oxide cathodes: direct fast conversion, dynamic structural evolution, and sodium storage mechanisms 1.00
Correlating halide segregation of wide-bandgap perovskites with the methoxy group in organic hole-selective materials 1.00
Reassessing anionic redox in conventional layered oxide cathodes for Li-ion batteries: ionic and covalent mechanisms 0.94
Umpolung of a covalent organic framework for high-performance cathodic sodium ion storage 1.00
1 1.00
Where should rural infrastructure construction focus? An evidence from official grassroots survey 1.00
685 643.87
Two-Stage Optimization for Hybrid Renewable Hydrogen Production Systems: Capacity Configuration and Electrolyzer Array Operation Strategy 1.00
PV-hydrogen hybrid renewable energy system control using distributed economic MPC scheme under partial shading conditions 0.75
Optimization Strategy for an Ice Storage Air-Conditioning System Considering Multi-Mode Switching and COP Variation 0.67
Weekly Periodicity Feature-Driven CNN-GRU and LightGBM Hybrid Model for Short-Term Multi-Step Building Load Forecasting 1.00
Thermal storage integration in buildings towards long-term rising EV charging demand: risk-aware and life-cycle optimal design framework 1.00
Quantum Physics-Informed Neural Network with Multi-Source Data Fusion for Prediction in Photovoltaic Water Heater Systems 1.00
Synergetic and complementary value of co-located offshore wind and wave energy in power grid applications 1.00
Building a net-zero power system under future climate conditions with data-driven forecasting and adequacy assessment 1.00
Techno-economic analysis of hybrid pumped hydro energy storage based on pumped hydro-compressed air energy storage: A case study of a hydro-wind-photovoltaic base in Southwest China 1.00
Dual-level Collaborative Optimization Model of Integrated Energy Systems with Electricity-Thermal-Hydrogen Hybrid Energy Storage 1.00
Distributionally robust location-inventory planning of commercial electric vehicle battery swapping stations with joint chance constraints 1.00
Decoupled scheduling of water-energy nexus system in coastal regions: A desalination-driven flexibility approach 1.00
Effect of Waste Heat Recovery Pathways on the Thermo-Economic Performance of a Solar-Augmented CCES System: A Mechanism Study 1.00
Thermal and power energy trading optimisation for centralised multi-energy utility system in industrial parks 0.17
Optimization of Rooftop PV System Design and Energy Storage Dispatch in Steel Mills: Accounting for Quantified Workshop Temperature and Dust Losses 1.00
Mechanism-Guided Porous Constricted Baffle-Rib Structures for Enhance Mass Transport in Fuel Cells 1.00
Design and Analysis of Axial Flux Dual-Permanent-Magnet Machines with Magnetic Field Modulation 1.00
A Short-Term Power Forecasting Method for Wind Farm Clusters Considering Feature Enhancement and Real-Time Optimization of Dynamic Graphs 1.00
An energy trajectory-based reinforcement learning framework with meta-adaptation for robust energy management in solar-powered electricity–heat–hydrogen integrated energy system 1.00
Thermodynamic analysis of an improved coal-fired power plant coupled with compressed air energy storage and molten salt storage 1.00
Techno-economic and uncertainty analysis of a novel heat-power decoupling system used in a coal-fired combined heat and power unit under the electricity spot trading mode 0.80
Purchase strategy and pricing mechanism design for risk-limiting balancing market 1.00
Dynamic aggregation strategy for two-way selection between distributed energy resources and virtual power plants based on evolutionary game 1.00
Data-driven operational flexibility strategy for thermal power considering time-domain dynamic carbon intensity and deep peak shaving‌ in renewable-integrated system 0.75
Multi-objective dynamic optimization of China's regional thermal power transition under the ETS: Balancing low-carbon, economic efficiency, and energy security 1.00
An advanced thermal storage integration framework for flexibilization of thermal power units: feasibility analysis and multi-objective optimization 0.80
Agent-based modeling on residential coordinated charging with dynamic participation 1.00
Impact of different integration modes between an ultra-supercritical coal-fired power plant and molten salt thermal energy storage system on thermodynamic performance 1.00
A novel hybrid short-term and ultra-short-term wind power forecasting method based on Weather Research and Forecasting: WRF-iTransformer-PSO 1.00
Unlocking the residential energy flexibility for off-grid PV: coordinated dispatch of source-load-storage based on Potential Game 0.83
Integration of deep reinforcement learning and parametric rule-based control for thermal storage management of district heating systems under spot price variations 0.17
A comprehensive evaluation framework from design to operation: Enhancing the regulation performance of variable-speed pumped storage plant in extreme pumping conditions 1.00
An improved coal-fired power plant integrated with carbon capture process incorporating Carnot battery and solvent storage for waste heat upgrading and flexible operation 1.00
Efficient low-carbon construction pathways for energy ecosystems in sustainable cities through deep reinforcement learning management with green hydrogen diversified utilization under trust safe peer-to-peer trading and social welfare 1.00
A novel stochastic energy management of renewable sources and hydrogen storages with distribution network reconfiguration simultaneously 0.17
Research on building flexible load quantification method based on users’ behavior prediction and multi-timescale optimized operation method for integrated energy system 0.88
Empowering Building Flexibility Service Through Thermal Energy Storage with Ground Source Heat Pump from Demand Side 0.33
Techno-Economic Analysis and Optimization of Grid-Connected Hybrid Renewable Energy Systems with Hydrogen Storage and Machine Learning-Based Solar Forecasting 1.00
Multi-Timescale Optimal Configuration of Electro-Hydrogen Coupled system: A cost-effective and efficient solution for flexible operation of high penetration renewable energy distribution networks 1.00
A large-scale Wind Farm Cluster Low Output Event Identification Method Based on Historical Reuse Information Encoding 1.00
Beyond Emission Reduction: How Carbon Capture Reshapes Operational Flexibility and Energy Efficiency of Coal-fired CHP Plants 1.00
Multi-criteria decision framework and capacity sizing optimization for multi-energy storage synergy schemes in regional integrated energy systems 1.00
A Frequency Security-Constrained Dispatch Strategy for Large-Scale Adiabatic Compressed Air Energy Storage with Parallel Compression and Constant/Sliding-Pressure Expansion Designs 1.00
Weather prediction driven energy management strategy for photovoltaic charging station utilizing electric vehicles as flexible energy storage 1.00
Planning-oriented rooftop PV potential assessment in China's high-speed railway station areas: Function-based availability and morphology-driven shading 1.00
Well-to-wheel energetic, environmental and economic life cycle assessment of methanol and hydrogen pathways in China 0.96
Grid-interactive characteristics of passive thermal storage in buildings and the key influential factors – An experimental and analytical assessment 1.00
Maximum expected-benefit optimal scheduling and risk analysis of hydro-wind-solar joint generation under inflow and generation-load uncertainties 1.00
A temporally adaptive IGDT-DRO framework for logistics–energy coordinated scheduling of port integrated energy systems 1.00
A practical few-shot wind power prediction method for extreme cold waves: Integrating improved ITimeGAN, de-stationary attention, and SHAP interpretability 1.00
Bi-level coordinated scheduling of the battery swapping stations and distribution networks for electric farm tractors considering cross-regional operations 1.00
Multi-type Electricity Market Collaborative Trading Optimization Model for Stimulating the Regulation Potential of Flexible Resources: Experience from China's Pumped Storage Plants 1.00
Solar irradiance prediction using K-MTransformer model based on data input from K-means++ clustering 1.00
Operational performance of compressed CO2 energy storage in aquifers under dynamic reservoir pressure through coupled surface-wellbore-reservoir modeling 0.75
Unlocking energy flexibility potential in user-friendly buildings: a bi-level hybrid economic model predictive control strategy 1.00
A novel spatio-temporal guidance strategy for wind field prediction for hilly terrain 1.00
Enhancing grid-friendliness in PV building clusters via a coordinated control strategy integrating bidirectional electric vehicle charging 1.00
Bio-natural Gas Potential of Landfill Gas in China under Shared Socioeconomic Pathways Scenario 0.86
An integrated TCN-ECA-BiLSTM and TD3 framework for high-accuracy forecasting and optimal load allocation in combined heat and power systems 1.00
A Wind Power Forecasting Method Based on GWS-STNet Spatio-Temporal Meteorological Prediction 1.00
Optimal location of slope solid gravity energy storage using geographic information systems and multi-criteria analysis 1.00
An alternative on-site accommodation pathway and techno-economic evaluation for Desert-Gobi-Wasteland energy bases by the wind-solar-thermal-chemical multi-Energy integration 1.00
Multidimensional evaluation of a wind farm-data center hybrid energy storage system considering full life cycle carbon emissions 0.88
Physics Informed Virtual Sensor Modeling for Wind Power Prediction 1.00
Quota allocation of provincial non-hydro renewable energy power in China: A supply-demand match allocation framework integrating generation-side potential and consumption-side resilience 1.00
Deep Reinforcement Learning Strategy Integrating Environmental Perception and Semantic Masking for Real-Time Operational Optimization of Building Cluster Microgrids 0.63
Neighborhood-enhanced attention mechanism model and its application in extreme wind speed prediction using multi meteorological factors 1.00
Towards Near-Zero-Carbon Industrial Parks: Integrating Photovoltaics, Storage, Grid Interaction, and Distributed Trading 1.00
Modelling and evaluation of operational flexibility and efficiency of coal-fired power units with post-combustion carbon capture 1.00
Physics-Informed Reinforcement Learning for electric vehicle charging scheduling 1.00
A novel photovoltaic and parabolic trough collector hybrid system for pilot and long-term hydrogen production under natural sunlight 1.00
Dynamic graph and multi-period temporal feature learning for predicting regional photovoltaic power generation 0.69
Predicting Pump-Turbine Axial Hydraulic Thrust with the PMAT Model: A Coupled Pressure-Integration and Momentum-Theorem Approach 1.00
Optimal Configuration of LOHC-Based Hydrogen Refueling Stations 1.00
A physics-data hybrid model for efficient and accurate prediction of thermal recovery in high-temperature aquifer thermal energy storage 1.00
Multi-timescale coordinated optimization of hydro-wind-solar-hydrogen integrated system operator considering prediction error 1.00
An enhanced solar–coal hybrid power generation system by integrating photovoltaic–powered coal pre–drying 1.00
Performance evaluation of a short-tube ducted tidal stream turbine: A hybrid framework integrating lattice Boltzmann simulation and orthogonal experimental design 0.88
Wind Power Low-output Event Identification and Accurate Prediction Strategy Based on Global Heterogeneous Information Dynamic Fusion with Dynamic Dual Graph Neural Networks 0.44
Revealing the Mechanism of Pipeline-Failure-Induced Cross-System Fault Propagation in Hydrogen-Blended Integrated Gas-Electricity Systems Through Transient Analysis 1.00
Cooperative Optimal Scheduling of IESP-VPP in Electricity-Gas Market Based on Stackelberg Game 1.00
A wind farm cluster power prediction method based on globally aware dynamic spatiotemporal graph continual learning framework 1.00
WHNet: A Dual-Branch Wavelet–Highlight Network for Solar Irradiance Forecasting 1.00
An Optimization Method for Tidal Current Turbine Array Layout Based on Particle Swarm Optimization 1.00
Regulation-oriented cascade hydropower coordinated operation with pumped storage: dispatch strategy and comprehensive evaluation 1.00
Assessing the regional impacts of the transition in China’s power sector 1.00
Optimal planning and multi-criteria evaluation of shared energy storage in multiple microgrids: interactions of diverse master-slave game pricing mechanisms and storage technologies 0.88
Effect of partial shading on the performance of concentrated photovoltaics: a simulation and experimental study based on the double-diode model 0.71
Thermo-economic analysis of individually coupled steam, heating, and cooling production in a Carnot battery 1.00
A Two-Stage Uncertainty Forecasting Method for Offshore Wind Power Based on FEDformer and SDCDM 1.00
Research on an Improved Model Predictive Control–Based Control Strategy for a Two-Stage Cascaded Hydropower Stations with a Regulating Reservoir 1.00
Stability analysis and coordinated control strategy of Pelton turbine hydropower plants cascaded with regulating reservoir during power regulation 0.90
Compact Design of 550 kV GIL Based on Multi-Physics Coupling and Multi-Objective Optimization Strategy 1.00
CO2 storage capacity estimation in underground geological sites using innovative data-driven techniques 0.69
A Fast AC Loss Calculation Method for High Temperature Superconducting Magnetic Energy Storage magnet via Critical state Driven Current Identification 1.00
Equilibrium-based electricity-computation collaborative scheduling for data centers integrated with seawater pumped storage hydropower 1.00
Moment-based distributionally robust joint chance-constrained retrofit planning for wind-storage-thermal systems considering multiple time-scale correlations 1.00
Robust planning with multiple timescale dynamic adaptability for the green hydrogen ammonia synthesis system 1.00
Intelligent early fault warning for offshore wind turbine generators: a hybrid deep learning model with causal condition-adaptive dynamic thresholds 1.00
An Integrated Method for Electric Load Forecasting in Large Public Buildings Based on Load Patterns Clustering and Multi-Scale Temporal Feature Selection 0.86
An integrated prediction framework combining variational mode optimization decomposition, empirical quantile regression, and QLattice for dynamic point and interval prediction of carbon prices 1.00
Optimization and performance analysis of regional interconnected integrated energy systems considering economic, operational, and energy efficiency objectives 0.79
Dynamic modeling of interregional carbon emission transfers and mitigation responsibilities 0.80
Offshore Wind Farm Cluster Power Forecasting: An ASTGCN Framework with Dual-Layer Co-Evolution of Loss Function and Graph Construction Method 1.00
Geographic Information System-Based Closed-Loop Co-Optimization of Site-Capacity-Operation for Multi-Energy Complementary Bases 1.00
Economic Analysis of Hydrogen Storage and Transportation Technology for Offshore Hydrogen Production Platform 1.00
Industrial hydrogen demand response for adaptive robust operation of electric hydrogen integrated energy systems 1.00
A two-stage distributionally robust optimization approach for integrated energy systems: coordinated configuration of CCUS and hydrogen utilization 0.88
Thermoeconomic Analysis of Electrically Heated Molten Salt Thermal Energy Storage Power Generation Systems 1.00
User Refueling Choice Behavior of Hydrogen Fuel Cell Vehicles and Economic Optimization of Hydrogen Stations under Multi-Stakeholder Multi-Layer Game Model 1.00
Multi-objective evolutionary algorithm with two-tier fully-connected weight network for day-ahead scheduling of integrated cooling, heating and power energy systems 1.00
Enhancing Hydro Energy Synergy: Optimizing Short-Term Pumped-Storage Power Operations under High Renewable Energy Penetration 0.83
Joint Development of Tidal Current Energy in Multi-Channels surrounding Xiushan Island,China 1.00
Numerical study on flow field characteristics of full-scale tidal current turbines in different array configurations 1.00
Construction mode and pricing strategy of electric vehicle swapping station 1.00
Comprehensive stability analysis of pumped storage power station under wide-load operation across the full head range: Quantitative evaluation and global sensitivity 1.00
Explainable and physics-constrained PV power prediction via a hybrid framework Integrating secondary decomposition and improved Transformer-LSTM 1.00
A Shapley Value Profit Allocation Method for Integrated Energy System with Hydrogen-Electric Hybrid Vehicle Aggregator via Matrix Semi-Tensor Product 1.00
Modeling and optimal dispatch of an electric-thermal-hydrogen-methanol integrated energy system considering flexible loads under ladder-type carbon trading mechanism 1.00
Zero-carbon microgrid energy system with seasonal hydrogen storage for high-proportion renewable energy consumption 1.00
Methanol production technology development pathways under multi-agent stochastic evolutionary game: a complex network perspective 1.00
Optimization design and full life cycle feasibility analysis of energy system in power grid interactive building 1.00
Graph Network-Based Design Optimization of Multiple Chiller Systems with Knowledge from Existing Systems 1.00
Global assessment of wind-solar hybrid systems: unraveling physical constraints and economic potential for sustainable energy deployment 1.00
Global uncertainty of various downward shortwave solar radiation products 1.00
Meteorological Element Prediction for Renewable Energy Systems: Comprehensive Comparison on Deep Learning Algorithms with/without Hyperparameters Tuning 0.63
Coupled optimization of hydropower and variable renewable energy (VRE) synergistically supported by physically-based stochastic scenarios and multi-load node control 1.00
Collaborative Wind Speed Forecasting Based on Multi-Strategy MVMD and RestrictedCrossformer 1.00
Peak Shaving Model for Multiple Receiving Power Grids with Large-Scale Cascade Diversion-Type Hydro Plants via HVDC Transmission Lines 1.00
Influence of different temperature levels on urban electricity demand in China under urbanization and industrialization 1.00
Wake model-free active power control for wind-storage coordination using a state-decoupled MATD3 algorithm 1.00
Low-carbon economic optimization of integrated energy system with calcium-based carbon capture coupled with hydrogen utilization at multiple time scales 1.00
Integrated Planning of Source-Grid-Load-Storage for Regional Power Grids Considering Large-Scale Renewable Energy Integration 1.00
Pipeline sharing: Remaining capacity evaluation for liquid ammonia transportation in multi-product pipelines considering variable flow rate 0.94
Multi-step wind speed forecasting based on multi-task learning using mixed granularity collaborative network 1.00
System Design, Operational Optimization and Model Predictive Control of Power-to-Gas Systems based on Modelica/Simulink Co-Simulation 0.75
Efficient evaluation of wind energy and carbon mitigation potential under land resource constraints via deep learning 1.00
Bayesian inference-based deep learning approach for performance prediction and uncertainty quantification of solar photovoltaic-driven heat pump systems 1.00
Assessing the impacts of extreme high-temperature events on China’s hybrid wind–solar power generation potential from the perspectives of complementarity and stability 1.00
Improving PV-wind power utilization by thermal, hydro and pumped storage considering local and cross-regional power demand 1.00
Quantifying the effect of optimization parameter resolution on firm solar generation: A California case study 1.00
Annual capacity analysis and multi-objective optimization of a nuclear-renewable integrated energy system 1.00
Low-carbon optimal dispatching of rural multi-energy microgrid system based on multi-energy conversion and agricultural load demands 0.96
Enhancing wind farm power output via DRL-based collaborative pitch control of tandem turbines 0.95
A novel hybrid solar-geothermal-gas turbine system for combined cooling, heating and power: Achieving self-sufficient operation through dynamic energy balancing and comprehensive performance analysis 1.00
Optimal Topology Reconfiguration for Regional Electricity-Heating Integrated Energy Systems: An Event-Driven Approach 1.00
Systematic Analysis of a Fully Renewable Tri-generation System Based on Solar-Biomass Gasification and Chemical Looping Processes 1.00
A Diffusion-Based Generative Framework for Multi-Energy Scenario Modeling in Low-Carbon Building Clusters 1.00
A Hybrid TCN-LSTM-Attention Framework for Multi-Scenario Short-Term Photovoltaic Power Forecasting Incorporating Physics-Informed Neural Network Strategy 1.00
Dataset Preprocessing and Optimization for Machine Learning-Based Building Load Prediction: A Review 1.00
Deep learning-based distributionally robust optimization scheduling in the low carbon park integrated energy system under multiple uncertainties 0.83
Collaborative optimization operation strategy of integrated energy system considering integrated demand response: A Stackelberg game and improved Runge Kutta optimizer 1.00
A dual-steam extraction strategy for molten salt heat storage system enabling thermo-electric decoupling in a 660 MW CHP plant 1.00
Optimizing campus energy systems through occupant mobility modeling and flexible load scheduling: integration of PV, ESS and V2B technologies 1.00
Hybrid Wind Turbine and Natural Gas-Driven Multi-Generation System: 4E Analysis and Multi-Objective Optimization for Efficient Waste Heat Recovery in a Compressed Air Energy Storage System 1.00
A Multi-Variable Driven Dual-Stage Modal-Decoupling Framework Integrating Deterministic–Uncertainty Modeling for Wind Power Forecasting with Feature Interpretability Analysis 1.00
An Improved Approximate Dynamic Programming Algorithm for Optimal Dispatch of Integrated Electricity and Heat Systems with High-Dimensional State Variables 1.00
Study on the Relationship between Lifespan of Proton Exchange Membrane Fuel Cells and Sine Wave Flow Channels 0.92
A bi-level multi-timescale scheduling approach to flexible operation of a coal-fired power plant with post-combustion CO2 capture facilitated by hollow fiber membrane contactors 1.00
Low-carbon economic dispatch of electrified transportation networks considering grid parity and mixed traffic of human-driven and autonomous vehicles 1.00
Low-carbon hydrogen-electricity energy supply networks for China-Thailand international high-speed railway 0.93
A bi-level electricity-carbon-hydrogen coupled capacity configuration model of zero-carbon park integrated energy system under robust operation 1.00
PMV-based HVAC control strategy for demand response: Optimizing energy savings and occupant comfort 1.00
Performance of proton exchange membrane fuel cell with bionic fish scale porous flow field design 1.00
Co-optimization of configuration and energy scheduling of multi-communities microgrid systems considering carbon-green certificate trading mechanism 1.00
Minimum Consumption Pricing Strategy for Alleviating Electric Vehicle Charging Congestion 1.00
A time–frequency collaborative network with endogenous–exogenous variable decoupling for enhanced photovoltaic power forecasting 0.80
Thermo-economic performance and operational strategies analysis of AA-CAES system integrated with low melting point molten salt TES 1.00
Bi-level optimization of integrated PV-storage and by-product hydrogen systems for sustainable chlor-alkali industry 1.00
Optimization of a gas-steam-electric system integrated with a solar power tower plant in a steel company 1.00
An uncertainty information-guided optimization method for economic scheduling of PV-BESS systems 1.00
Research on the Operating Characteristics and Driving Behaviors of Pure Electric Buses 1.00
Bi-level robust optimization model for airport renewable energy system planning under uncertainty 1.00
Optimal scheduling of low-carbon ethylene production system based on deep reinforcement learning: Considering flexible operation under furnace coking and renewable energy fluctuations 0.60
Low carbon economic dispatch of electric-hydrogen-blended natural gas integrated energy system with multi-energy coupling and integrated demand response 1.00
A multi-objective two-stage distributionally robust optimization study of an integrated electric-gas system based on demand response 1.00
Comprehensive comparative assessments of optimal distributed solar-energy systems for combined heat and power 0.08
MTRCL: A spatio-temporal multi-source data fusion method for enhancing short-term wind speed forecast capability of numerical weather prediction 1.00
A spatial aggregation-based chronological production simulation model for the decarbonization pathway analysis of provincial power system 1.00
Dynamic graph convolutional network considering wind speed delay and two-stage transfer learning applied to few-shot wind power prediction 1.00
A stochastic cloud-driven clustering sizing method for a hybrid photovoltaic/battery energy system integrated with electric bus charge station: A case study for China 1.00
Swirling instability suppression through a honeycomb-like grid in a giant hydraulic turbine 1.00
Synergistic effects of baffles in cathode channel and conical frustum grooves in cathode gas diffusion layer on the performance of proton exchange membrane fuel cell 0.83
Runner modification optimization design method for pump-turbine runner considering hydraulic transient guarantee parameter constraints 1.00
Research on dynamic carbon emissions in refrigeration system: a case study of cascade system 1.00
Cross-scale coordinated optimization method for electricity-thermal-hydrogen systems in chemical industrial parks based on long-term and short-term flexibility margin evaluation 1.00
A method for generating radiation meteorological year using machine learning fusion and adaptive neural network with application to BIPV systems 1.00
Charging decision modelling and load collaborative simulation of electric vehicles based on multi-source fusion: Adaptive Huff-LSTM method 1.00
Investigation into the process of downflow adaptive tidal current power generation system 1.00
A two stage feature extraction and synchronized feature–parameter learning framework for reliable multistep wind speed forecasting 1.00
A bottom-up framework incorporating non-commercial energy: Multi-Scenario dynamic simulation for low-carbon transition of rural residential buildings in northwest China 1.00
Electricity-carbon coupled markets-oriented co-optimization of retrofit and bidding strategies for coal-fired power plant 1.00
A Nash–Stackelberg–Nash game for collaborative operation of a coupled microgrid-transportation network 1.00
Wind speed forecasting using dual-attention patch-based multiscale transformer 1.00
Coordinated scheduling of hydropower units: Risk-aware day-ahead planning and performance-driven intra-day regulation allocation 1.00
Energy, economy, and environment optimization of biomass gasification hybrid energy systems integrated with solar and geothermal energies 0.50
A fractional grey reservoir computing prediction model and its application in clean energy forecasting 1.00
Risk-averse scheduling of integrated energy systems: Green-carbon market coordination with flexible resources 1.00
A Heterogeneous Multi-Model Stacking Framework for Predicting Pump Complete Characteristic Curves 1.00
Low-Carbon Economic Scheduling of Rural Virtual Power Plants Considering Carbon-Green Hydrogen Certificates Coupling Mechanisms and Farmers' Cognitive Preferences 1.00
Coordinated operation of grid-connected hybrid system composed of pumped storage and wind under hydraulic short circuit operation mode 1.00
Multi-objective optimization of wind power and pumped storage system scheduling with consideration of green certificate-carbon linkage trading 1.00
Emergency scheduling of virtual energy storage based on continuous-time model for resilience enhancement under extreme events 1.00
A method for smoothing grid power fluctuation in hydraulic energy storage type wave energy converter based on active power compensation 1.00
Zero-carbon distributed energy systems incorporating proton exchange membrane electrolyzer, hydrogen-oxygen combined cycle, heat pump, and multi-stage flash desalination: Operation strategies and performance analyses 1.00
Multi-timescale performance analysis of an offshore wind–solar–wave hybrid hydrogen production system for an energy island 0.86
The Impact of Artificial Intelligence on Carbon Emissions and Its Spatial Spillover Effects: Evidence from Industrial Robots 1.00
Economic-environmental equilibrium operation strategy for renewable driven and hydrogen involved multi-energy system considering source-load uncertainties 1.00
Two-stage ultra-short-term wind power forecasting based on multi-scale wind process extraction and fluctuation continuation analysis 1.00
A Chaos-Guided Slime Mould Algorithm for multi-energy dispatch in hydrogen–ammonia integrated multi-microgrid systems under dual trading constraints 0.83
Capacity configuration and optimization of PV/T coupled gas turbine multi-energy cogeneration system for data center 1.00
DBSTN: A dual-branch spatio-temporal network for wind power prediction using multi-modal fusion 1.00
Multi-criteria decision-making optimization of an independent photovoltaic-battery energy storage water pumping system 0.88
Digital intelligence-driven synergistic optimization of capacity configuration for wind-solar-hydrogen multi-energy systems integrated with shared energy storage 1.00
Improving the energy efficiency and economic benefits of port integrated energy systems: A multi-objective optimization model for wind-storage-charging-discharging power stations with green efficiency factors-driven multilateral response strategy 1.00
Deep Deterministic Policy Gradient-based optimization of energy management strategy for hydrogen production systems 1.00
Allocation of provincial renewable energy power quotas in China: A Supply-Demand balance perspective 1.00
Day-ahead scheduling of hybrid molten salt-phase change salt thermal energy storage system applied for peak-shaving of coal-fired power plant 1.00
Enhancing demand response in coupled electricity and carbon markets: Optimising market signals and dispatch configurations 0.84
Experimental and numerical analysis of honeycomb-shaped flow field for enhanced mass transport and performance in PEM fuel cells 1.00
Unveiling Lifespan Bottlenecks in High-Power Fuel Cell Stacks: Flow Maldistribution, End-Cell Degradation, and GDL/CL Interactions under Accelerated Degradation Testing 0.83
Customized grey-box model for demand response probabilistic potential assessment of urban public buildings 1.00
A Novel Deep Reinforcement Learning Framework for Optimal Scheduling of Low-Carbon Integrated Energy Systems Considering Battery Degradation 0.71
Energy, exergy, environment, and economic (4E) analysis and multi-objective genetic algorithm optimization of an energy-saving and carbon-reducing electrification ethylene glycol multiple-effect distillation process 1.00
A GIS–MCDM-Based Three-Stage Framework for Underground Pumped Storage Hydropower Site Selection in Coal-Resource-Exhausted Cities: A Case Study of Xuzhou, China 1.00
Prediction-based optimal system design of an improved building-to-vehicle-to-building energy community under different operation strategies concerning three PV installation types 1.00
DWT-Former: Fusing wavelet-based multi-scale features and transformer-based temporal representations for photovoltaic power forecasting 1.00
Spectral Dynamic Aggregation Transformer and Fitted Swing-Door Algorithm For Wind Power Monitoring 0.86
AI-Optimized Solar-Wind Polygeneration for Sustainable Power and Hydrogen: A Pathway to a Cleaner Future 0.79
Adaptive Stacking ensemble model driven by multi-source data fusion for energy consumption prediction in forging production line 1.00
A novel hybrid game-based mechanism for massive energy community prosumers coordination 1.00
Power prediction methods for offshore wind farm clusters: interpretable ASTGCN based on wind speed delay perception and spatial feature fusion 1.00
A CARB reconfiguration algorithm based on greedy optimization for enhancing power output efficiency of PV systems in shading conditions 1.00
A novel zoning framework for hydro-wind-photovoltaic integrated energy bases based on Laplacian-enhanced clustering and complementarity evaluation 1.00
A Physics-Informed Seq2Seq Neural Network-Based Control Strategy for Improving the Energy Flexibility of Building-Integrated Thermal Storage Heat Pump Systems 1.00
Interpretable multivariate wind speed forecasting using sliding masked window-based decomposition and deep autoregressive networks 1.00
Lidar measurement modeling and rotor equivalent wind speed prediction based on VMD-CED-splGRU 0.78
Exploring Compressed Air Energy Storage in Abandoned Flooded Coal Mine: Thermodynamic Analysis and Applicability Study 0.57
A Wind Power Prediction Method Integrating Dynamic Multi-scale Spatio-temporal Modelling, Adaptive Multi-strategy Local Decomposition, and Meta-learning Ensemble Model 1.00
Coupled Dynamic Response of Passive Current Adaptation and Flow Enhancement of a Self-Adaptable-Orientation Turbine with Diffuser Structure for Tidal Condition 1.00
Design optimization of a renewable methanol production system with multiple types of energy storage devices 1.00
Cloud-edge collaborative optimal control strategy for virtually aggregated EV charging facilities in a market environment 1.00
A dual carbon reward mechanism for electric vehicle charging scheduling based on multi-level Stackelberg game 0.94
Optimal Decentralized Power Control Considering Wide Wind Speed Range for Wind Farm Based on Rotor Speed Dominant 1.00
Adaptive multi-objective Bayesian optimization approach for capacity planning of the interconnected offshore wind farms 1.00
ToU-Driven Energy Storage Scheduling for Enhancing Energy Flexibility in a Nearly Zero-Energy Building 1.00
Hydraulic Transient-Aware Day-ahead Dispatch of Hydro-Wind-Solar Hybrid Energy System 1.00
Electromagnetic-thermal-fluid coupled modeling and temperature analysis of a linear generator for linear range extenders 1.00
Topology optimization of the gas distribution zone uniformity in proton exchange membrane fuel cells 1.00
Low-carbon economic dispatch of a hydrogen-based integrated energy system considering the coordinated operation of CHP-ORC-CSP and P2G-CCS 0.75
A high dimensional uncertain scenario generating method for wind power and photovoltaic considering spatiotemporal correlation 1.00
ACOLM: Adaptive Contrastive Online Learning Model for Urban Extreme Weather Load Forecasting 1.00
Performance analysis of a linear Fresnel solar-aided coal-fired power generation system with peaking capability 0.86
Enhancing the economic benefits of cascade hydropower stations through integrated utilization of electricity and capacity benefits 1.00
Joint Probability Prediction of Multi-site Wind Power Based on Multi-Model Collaborative Heterogeneity 1.00
A Multi-Stage Stochastic-Robust Planning Approach for Highway Service Area Self-contained Energy System Considering Multiple Uncertainties 1.00
Optimal guide vane opening-based variable-speed control for small hydropower units: Enhancing efficiency under wide head fluctuations 1.00
An optimized energy management strategy for wind-PV hybrid heat pump systems with dual storage: Enhancing power-to-load interaction 1.00
The economic value of wind power forecasting: a data-driven method and its application in various scenarios 1.00
The Coordinated Multi-Energy Trading Framework for Integrated Energy Systems Considering Electricity-Hydrogen Trading and Carbon Emission Flow 1.00
Integrated optimization of hybrid energy systems for efficient energy generation, carbon capture, and freshwater management 1.00
Distributed Coordination of Electricity-Hydrogen-Ammonia Integrated Energy System with Aggregated Distributed Energy Resources Under High Renewable Energy Penetration 1.00
A multi-domain coordinated control strategy for PV direct-driven ice storage systems: Enhancing efficiency and supply-demand matching via dynamic energy regulation 1.00
A decentralized dynamic power sharing strategy for renewable hybrid hydrogen electrolyzer systems without communication networks 1.00
Optimal planning for charging stations within multi-coupled networks considering load-balance effects 1.00
Optimal charging and discharging strategy for workplace electric vehicle charging stations with renewable energy and power network constraints 1.00
Wind power forecasting in China based on a novel variable order grey Bernoulli model with weighted time-driven term 1.00
Techno-economic analysis of a combined heat pump and liquid CO2 energy storage system: A pathway for energy density enhancement 0.50
System Scheduling of the Zero-Carbon Hydrogen-Based Industrial Park via cGAN-Distributionally Robust Optimization: A Case Study in Ordos, China 1.00
Optimal scheduling for electric vehicle charging and discharging via double Q-learning-based multi-objective particle swarm optimization 0.80
An explainable multi-feature dimensionality reduction framework: Considering trend inconsistency in wind power sample 1.00
MS-CGDM: Multi-scale conditional graph diffusion model for extreme weather source-load scenario generation 1.00
Hybrid ultra-short-term wind speed forecasting model based on improved BO-HMA-BiGRU and GMBInformer: Integrating SVMD-SWT dual decomposition and MPE-driven modeling mechanism 0.97
Design and performance evaluation of a new steam/water hybrid thermal energy storage system integrated within a coal-fired power plant 1.00
Distributed scheduling model of multi-network coupled energy system considering dynamic charging price mechanism and multiple utilization of hydrogen energy 1.00
Orderly charging and discharging dispatching strategy for electric vehicles based on microgrid 1.00
Study on energy consumption prediction method of air-conditioning system from the perspective of indoor environmental parameters by using Elman neural network 1.00
Two-stage robust optimization of distributed energy systems considering nonlinear multi-energy transmission and conversion 1.00
Feature-driven dynamic non-crossing quantile ensemble learning for reliable probabilistic wind power forecasting 1.00
Medium- and long-term hydrogen demand forecast in China: A multi-sector and multi-region analysis 0.75
A hybrid deep learning model based on Rime optimization and multi-head attention for cooling load prediction in public buildings 1.00
Enhancing renewable energy load forecasting through deep data analysis and feature extraction techniques 0.89
Balancing Traffic and Charging Efficiency for EVs in Freeway Bottlenecks: Charging (Low-SOC) or Fast Passage (High-SOC) 1.00
Techno-economic analysis of an integrated spectral beam splitting concentrated photovoltaic thermal and two-stage organic Rankine cycle system 0.70
The impact of wind-solar capacity ratio on the technical and economic feasibility of a coal chemical coupled off-grid/weakly grid-connected green hydrogen production system 1.00
Carbon-aware IES energy management based on green hydrogen blended CHP and seasonal monitoring of carbon trading strategy 1.00
Multi-layer fusion model based on decomposition denoising and intelligent algorithms for wind speed prediction 0.93
Thermodynamic analysis and operation strategy optimization of a coal-fired power plant incorporating the CO2 capture process 1.00
An economic model predictive control strategy for EV-integrated microgrids considering battery degradation 1.00
Study on Hydrodynamic Characteristics and Power Generation Performance of Gable-Type Floating Photovoltaic 1.00
Optimal modelling and analysis of DG-GC joint multilateral transaction in energy blockchain environment: from the REP perspective 1.00
Evaluating the potential of battery-swapping service for electric vehicles: The role of supply-side policies and demand-side time sensitivity 1.00
Performance analysis of direct air capture-based renewable power-to-methanol (P2M) system in different regions of China: An annual intermittency investigation 1.00
Distributed robust coordinated multiple electricity substitution planning under network constraints and uncertainty 0.83
Stackelberg-Nash Bargaining-based Low-Carbon Scheduling for Multiple Integrated Multi-Energy Systems 0.83
The Role of Roadside Solar Photovoltaic Systems in Achieving Global Carbon Neutrality: Assessing Capacity, Economic Feasibility, and Carbon Reduction Potential 1.00
Bi-Level Optimal Active Power Dispatch in Wind Farms for Drive Train Load Reduction 1.00
A Multi-source Feature Engineering-enhanced Framework for Mid-to-long-term EV Charging Load Forecasting: Integrating Self-adaptive Optimization and BiLSTM-iTransformer Predictor 0.80
Influence of Heterogeneous Electrode Structures on the Electrochemical Properties of Lithium-ion Battery and Optimization Strategies 1.00
A Communication-Free Control Strategy for Dual-Channel WPT with Wide ZVS Range: Design and Experimental Validation 1.00
Towards intelligent cooperation of urban electric-traffic coupling network: A distributionally robust hierarchical optimization method with dependency of uncertainties 0.71
Distributed optimal control of wind farms with deloading operation for load sharing 1.00
Multi-objective optimization scheduling of off-grid combined heat, power, and hydrogen production systems in cold regions under fluctuating demand: The case of Korla 1.00
Economic operation optimization study of farm biogas-photovoltaic distributed generation system 1.00
Techno-economic-environmental assessment and optimization of multi-energy complementary systems under dynamic building loads 0.80
DDRGS2S: A novel spatiotemporal correlation-based deep learning model for wind power prediction 0.83
Economic feasibility and life cycle assessment of a renewable energy-powered hydrogen production and liquefaction system in multiple climatic regions 1.00
Using interactive gamified simulation to explore how economic incentives affect appliance flexible regulation potential 0.80
Multi-Source Data-Driven Short-Term Remaining Driving Range Prediction for Electric Vehicles: A Hybrid CNN-Transformer Framework 1.00
Machine learning-based economic model predictive control for energy hubs with variable energy efficiencies 0.40
Designing personalized incentive-based demand response services based on smart meter data and NSGA-III-DE algorithm 1.00
Capacity optimization of a transportation-power coupled network based on elastic traffic demand user equilibrium using a multi-step evolutionary algorithm 1.00
Optimal control of parallel combination of heat pump and chiller system based on an improved golden jackal optimization 1.00
Short-term load forecasting for an industrial building based on diverse load patterns 0.88
Dynamic heat storage and release characteristics and flow control optimization of photovoltaic/thermal-heat pump coupled packed bed thermal energy storage system (PV/T-HP-PBTES) 1.00
Optimal reconfiguration of PV array based on non-equilateral digital image processing technology 0.88
Short-term PV forecasting of multiple scenarios based on multi-dimensional clustering and hybrid transformer-BiLSTM with ECPO 1.00
A novel time-history optimization control method for power control of wind turbines based on aging evaluation 1.00
High-performance aqueous zinc-ion hybrid micro-supercapacitors enabled by surface-modified Ti3C2 MXene anode and polar organic molecule intercalated AlxV2O5 cathode 1.00
Stochastic Dual Dynamic Programming for Multi-Stage Stochastic Programming of Sustainable Utility Systems 1.00
Dynamic scheduling for integrated energy systems: A variable timescale approach with process parameter deviation-driven feedback correction 1.00
Unlocking the potential of hydrogen refueling stations and phase shifters for power system resilience: a decentralised methodology 1.00
Bi-level optimal dispatch of integrated energy system considering biomass-coal co-combustion power generation and power to ammonia 1.00
Flow-Induced Vibration and energy harvesting of three tandem-arranged hydrofoils 1.00
Enabling Self-Approaching Optimization of Home Energy Management System through Multi-Agent Systems 1.00
Flexibility improvement in thermal power units by coupling with adsorption-based compressed CO2 energy storage system: A comprehensive analysis 1.00
Rural household annual electricity load profiles generation method based on multi-source information fusion to resolve data scarcity challenges 1.00
Power capacity optimization and long-term planning for a multi-energy complementary base towards carbon neutrality 1.00
System modelling and multi-objective optimization of a photovoltaic-thermal assisted dual-source heat pump integrated with PCM 1.00
Collaborative scheduling optimization of hydrogen-enhanced integrated energy system via goal-conditioned hierarchical reinforcement learning 1.00
A hybrid neural network-based model for quick prediction of clean energy harvesting performance by a VIV-type system 0.25
Short-term wind speed prediction based on denoising algorithm of enhanced successive variational mode decomposition and integrated parallel prediction model 1.00
Thermodynamic and techno-economic analysis of solar-driven H2/NH3 co-production via double chemical looping 1.00
A LSTM-model based approach for long-term forecasting of high-rise residential building integrated photovoltaic system 0.75
Design, Analysis and Implementation of a Low Cogging Torque Axial-Flux PM Machines with Dual Rotors and Modular Stators for Electric Vehicles 0.67
Hybrid Deep Learning Model for Battery Swap Station Load Prediction Considering Differentiated Fluctuation Sequences 0.83
Objective-driven charging control and learning-based incentive pricing for demand response of electric vehicles 1.00
A data-driven robust optimal day-ahead bidding strategy considering V2G operation for distribution-system-side virtual power plant 1.00
Layer-by-layer stacked nano-CuZn5 for conductivity multi-enhancement and surface engineering of anode current collector in dendrite-free sodium metal batteries 1.00
Multi-energy scheduling study under uncertainties in iron and steel industry based on multi-objective two-stage robust optimization 1.00
A Transformer-based model fusing temporal dependence and variable correlation for short and medium-term electricity price forecasting 1.00
Multi-objective Seasonal Peak-shaving Scheduling Optimization for Nuclear-powered Seawater Desalination in Electricity Spot Markets 1.00
Vibration control and parametric optimization of tuned liquid column damper for offshore wind turbines during shutdown 0.75
Stochastic Optimization of Electric Vehicle Charging Strategy Based on Day-ahead High Precision Forecast for Renewable Power and Charging Demand 0.67
Low-carbon and Economic Operation of Integrated Energy Systems in Ammonia-production Chemical Parks 1.00
Preference-based multi-objective energy retail package for efficient and flexible demand response of energy community 1.00
Two-tier optimal scheduling of integrated energy systems in parks considering P2G-CCS-CHP coupling and electricity-gas-heat-cooling price-demand response 1.00
Enhancing Network Flexibility and Profitability in Multi-Energy Micro-Grid Systems through Decentralized Multi-Agent Optimization 1.00
Frequency-aware ultra-short-term wind power forecasting using CEEMDAN-VMD-SE and Transformer-GRU networks 1.00
Climate-Informed Long-Term Forecasting of Wind and Photovoltaic Power Using a Hybrid DWT–BES–CNN–LSTM Model 0.86
Design and optimization analysis of a novel coupled wind-solar energy system 1.00
An enhanced bilayer long short-term memory method for energy consumption estimation of electric buses with real-time passenger load 0.57
Future-powered transportation fleets and mobility in eco-friendly cities: Economic scheduling interactions for integrated energy hubs via micromobility electric vehicles 0.67
Analysis of triple phase shift strategy in wireless power transfer systems considering asymmetric parameters and harmonics for enhanced energy efficiency 1.00
Business-oriented optimization of EV-to-building energy flows: Predictive modeling and scenario evaluation 0.17
Multi-stage wind speed prediction with CEEMDAN-SE-IDBO-LSTM based on rolling decomposition 1.00
Nested long-short-term temporal compression optimization for high-renewable integrated energy systems with hydrogen storage and heat recovery 1.00
A robust optimal battery swapping station location model for commercial electric vehicles under demand uncertainty 0.83
4E analysis of an integrated system using nitrogen expansion refrigerant and LH2 cold energy for a compression-free liquid air energy storage 0.55
Coordinated expansion planning of integrated electricity and natural gas distribution systems for enhancing both inherent and dynamic resilience: A distributionally robust approach considering decision-dependent uncertainty 1.00
Collaborative optimization for cross-regional integrated energy systems producing electricity-heat-hydrogen based on generalized Nash bargaining 1.00
A novel ensemble support vector regression for load forecasting under data attacks 1.00
Full-scene energy consumption prediction for electric vehicles: A knowledge-enhanced hybrid-driven framework 1.00
IGDT-based two-layer optimization of trading strategies in multi-energy markets 1.00
Research on start-up strategy of mixed-flow pumps in pumped storage systems: Quantitative assessment and optimal mode acquisition 1.00
Quantification of flexibility in natural gas systems based on limited information measurements 1.00
Wind direction prediction combined with wind speed in a wind farm 0.90
Investigation on the CNN-LSTM-MHA-based model for the heating energy consumption prediction of residential buildings considering active and passive factors 1.00
Modeling on carbon emission flow in micro energy grid optimal dispatching considering source-load coordination 0.80
Techno-economic assessment of a novel organic Rankine cycle-based wind-hydrogen coupled energy storage system 1.00
Environmental and economic optimization of office building microgrid based on carbon-electricity market and improved Harris Hawks optimization algorithm 1.00
Optimization configuration of hybrid energy storage capacities for large-scale renewable energy bases in desert: A case study of Tennger, China 1.00
Gas transport characteristics and airtightness evaluation of lined rock cavern for compressed air energy storages (CAES) 1.00
Multi-level control for shared hydrogen storage system based offshore DC microgrid cluster involving adaptive barrier function 1.00
Life cycle greenhouse gas emission assessment of solar power tower plant based on supercritical CO2 cycle operating at peak-shaving scenarios 0.93
Bi-level planning of electric vehicle charging stations considering charging demand: A Nash bargaining game approach 1.00
Advancing next-generation cold storage: A comprehensive analysis of energy efficiency and life cycle cost assessment using clathrate hydrates 1.00
Effect of Gradient Porosity Distribution in Gas Diffusion Layer on Mass Transfer and Performance of Ten-flow Channel Proton Exchange Membrane Fuel Cell 1.00
A hierarchical robust scheduling framework for electric vehicle aggregators in coupled spot and ancillary service markets 1.00
Optimal battery storage capacity planning model and DOD regulation strategy for islanded microgrid based on distributed generation and a microturbine 1.00
Comprehensive investigation on impacts of flow uniformity on performance of large-scale PEM fuel cells 1.00
A three-stage optimization planning model for the integrated energy service station from the sustainable perspective of energy-transportation-information-humanities 1.00
Multi-Aspect Assessment and Artificial Intelligence-Based Optimization of a Sustainable Solar-to-Power/Hydrogen Process Using Three-State Numerical Simulation and Thermal Energy Storage 0.30
Multi-objective optimization of capacity configuration in a wind–PV–compressed air energy storage hybrid system 1.00
Multi-channel attention mechanism graph convolutional network considering cumulative effect and temporal causality for day-ahead wind power prediction 0.92
Intelligent optimization of operation schemes for a crude oil pipeline system under a variable-electricity-price policy 1.00
Dynamic Spatio-Temporal Graph-Enhanced KANformer for high-fidelity ultra-short-term wind power forecasting 1.00
Ultra-short-term wind power forecast based on multi-feature information fusion of GAT-Crossformer 1.00
Next-Gen Energy Solutions: Techno-economic Optimizing Fossil Fuel Facilities with Liquid CO2 Storage and Collins Liquefaction Cycle for Peak Load Management and Sustainable Efficiency 0.25
Optimization Design of Nuclear-Renewable Integrated Energy System in Industrial Parks Considering Carbon-Emissions Trading and Green-Certificate Trading 1.00
Resource Scheduling and Capacity Allocation Optimization of an Integrated Electricity-Heat-Gas-Hydrogen Energy System 1.00
Declared strategy of risk-constrained wind power participating in the power markets considering multiple uncertainties 1.00
Economically-driven spatiotemporal collaborative correction of high-precision wind power forecasting curves: aiming to more practical scheduling 1.00
Co-design of mechanical-electrical-control parameters of switched reluctance electric drive system 1.00
A Segmented Optimization HUC Model Considering Refined Vibration Zone Characteristics and Predictive Risk Control Strategy 1.00
Prior and Synergistic Effects in Multi-Source Information Fusion for Optimal Wind Speed Forecasting Model Selection 1.00
Short-term power load forecasting for estate-level buildings considering multilevel feature extraction and adaptive fusion 1.00
A Low-carbon energy management strategy for the integrated power system based on compressed carbon dioxide energy storage system and thermal power plant 1.00
Integrating a novel pumped thermal electricity storage system with industrial applications: Simultaneous achievements in flue gas heat recovery, carbon capture, and energy storage 1.00
Research on retrofitting strategy of coal-fired power plants combined with thermal energy storage system for peak shaving 1.00
Adaptive operation strategy for wind-hydrogen systems integrating alkaline and proton exchange membrane electrolyzers 1.00
Towards Near-Zero Carbon: Low-Carbon Evolution and Planning of Time-regulated Park Integrated Energy System 1.00
Deep learning-aided stochastic integrated optimization of highway service area renewable energy systems adopting a novel topology 1.00
Sector-coupled vehicle-to-everything operation of EV fleets for demand-side flexibility provision 0.33
Transient analysis of hydropower station with pressure-regulating valves considering effects of hysteresis and buffering 1.00
Optimized operation framework of pumped storage power stations with fixed- and variable-speed units sharing a diversion tunnel: Efficiency optimization and transient characteristics analysis 1.00
Enhanced Wind Power Prediction via Adaptive Fusion of Multi-Dimensional Spatial Graph and Global Features 1.00
Game-theoretic risk-averse day-ahead optimal bidding strategy of virtual power plant aggregated with heterogeneous distributed resources 1.00
A data-driven hierarchical dispatch framework for village renewable energy systems: Integration of user portrait cluster and cross-tier coordination based on ADMM 1.00
Cooperative Dispatching of Port Integrated Energy and Ferry Logistics Systems Under Interrelated Cross-Domain Uncertainties 0.70
Multi-agent Deep Reinforcement Learning based Low-Carbon Economy Energy Planning Strategy in IES Connected with Microgrid 1.00
A study on the performance of a novel underwater current energy harvester in environments with obstacles 1.00
Transient Instability Elimination during Turbine Runaway Process of an Ultra-high Head Pump-turbine 1.00
WD-SGformer: high-precision wind power forecasting via dual-attention dynamic spatio-temporal learning 1.00
Operation stability and capacity allocation of multi-machine power system coupled with pumped storage and wind power generation 1.00
A decentralized framework for self-healing in hydrogen-integrated energy systems 0.60
Prescribed performance-based privacy-preserving quantized consensus for distributed energy dispatch optimization 1.00
Co-optimization of well schedule and conformance control parameters assisted with Transformer-LSTM for CO2-EOR and storage in oil reservoirs 1.00
An energy storage roadmap study incorporating government subsidies based on a combined tripartite evolutionary game and Monte Carlo simulation approach: evidence from China 1.00
Short-period supply reliability evaluation of a gas pipeline network based on transient operation optimization and support vector regression 0.75
A Data-Analytics Approach for Price Cap Formulation of Electricity Markets Considering Synergistic Efficiency of Generation and Demand Sides 1.00
A novel interpretable wind speed forecasting based on the multivariate variational mode decomposition and temporal fusion transformer 1.00
Performance analysis of Carnot battery and its coupled seawater desalination system based on Kalina cycle discharge process 1.00
Asynchronous double consensus-based distributed optimization for sustainable industrial utility systems 1.00
An online energy consumption estimation method for different types of battery electric buses based on incremental learning 1.00
A temporal–image parallel hybrid solar radiation–wind speed–green hydrogen production potential prediction model based on federated learning and rolling real-time decomposition 1.00
Optimal Bidding Strategy for Virtual Power Plant Participating in Joint Energy and Reserve Market Considering Physical-Economic Feasible Operation Region 1.00
Capacity credit assessment of regional renewable generation considering multi-time-scale forecast errors 1.00
A Stackelberg-game based bi-level scheduling model of data center combined with shared energy storage considering price linkage and demand response 1.00
Ultra-short-term PV power prediction based on an improved hybrid model with sky image features and data two-dimensional purification 1.00
Dynamic electricity-carbon factors driven fast day-ahead coordination and optimization of source-load-storage in distribution networks with a white box accelerator 1.00
Enhancing Wind Power Prediction Accuracy: A Novel Method Integrating Seasonal Temporal Factors and Advanced Spatio-Temporal Feature Extraction 1.00
A comprehensive feasibility evaluation of hydrogen-carbon-salt cavern-renewable energy (HCSR) system 1.00
Depth of Discharge Optimization for Energy Management of Plug-in Hybrid Electric Vehicles Considering the Social Cost of Carbon 0.86
Techno-environmental and economic impacts of EV charging strategies on urban power systems under fleet heterogeneity and electrification uncertainty 0.83
Multi-scenario modeling for spatiotemporal distribution of battery-swapping heavy-duty truck load considering multi-source information interaction 1.00
Double-layer optimal scheduling for wind-PV-hydro-hybrid energy storage system with multi-timescale coordination 1.00
Two-layer iterative optimization for enhanced electricity-carbon pricing to promote renewable integration and load smoothing with multi-type prosumer 1.00
A novel two-stage multi-energy sharing model for data center-based microgrids considering joint grouping and matching priority 1.00
Research on investment decision-making of energy storage power station projects in industrial and commercial photovoltaic systems based on government subsidies and revenue sharing 1.00
Artificial Intelligence-Assisted Design and Optimization of Heterogeneous Gas Diffusion Layers in PEMFCs 0.88
Dynamic characteristics and performance analysis of typical liquid carbon dioxide energy storage systems 1.00
Flexible and low-carbon retrofit planning for wind-solar-thermal system: a distributionally robust Lipschitz dynamic programming approach 1.00
Layout optimization of the hydrogen network orienting towards hydrogen production from offshore wind power 1.00
Optimal dispatch of integrated energy system with CCUS-P2G coupling and hydrogen-doped gas equipment based on ladder-type carbon trading mechanism 0.90
A wind power ultra-short-term ensemble forecast framework considering wind speed correction and scenario classification 1.00
A Spatiotemporal Causal Inference based Multi-level Game Framework for Load Balancing among Fast Charging Stations 1.00
A novel electro-thermal-storage system for multi-energy supply and peak shaving in off-grid areas: a theoretical design, optimization and off-design study 1.00
Carnot Battery with Open-cycle Ultra-high-temperature Heat Pump for Large-scale Hybrid PV and Concentrating Solar Power Plants 1.00
Low-Carbon Optimization Scheduling of a CCS-P2G-HFC Integrated Energy System with 2D-DR under Multi-Mechanism Collaboration 1.00
Mechanism Analysis of Ultra-Low-Frequency Oscillations in High-Penetration Hydropower Systems and Suppression Strategy Based on PID-QPR Control 1.00
Wind power forecasting for newly built wind farms based on deep learning with dual-stage attention mechanism and adaptive transfer learning 1.00
Dual-path ultra-short-term wind power forecasting based on numerical weather prediction and multi-order temporal dynamic gating fusion 1.00
Numerical investigation of multiscale flow-induced vibration and fatigue life prediction of a large Francis turbine 1.00
Planning and Configuration of Self-contained Energy Systems for Railways in China 1.00
Performance Analysis of Coal-fired Power Plant with Carbon Capture Integrated with a Supercritical Compressed Carbon Dioxide Energy Storage System 1.00
Optimal operating rules of hybrid power systems considering the integrated electricity and hydrogen markets 1.00
Inverse problem method for two-stage co-optimization of solar hybrid combined cooling, heating and power systems with energy storage through improved particle swarm algorithm 1.00
Experimental study on dynamic characteristics of the jacket-type offshore wind turbine under wind and collision loads 1.00
Optimal Trading Strategy for Community-based Photovoltaic Prosumers: Harnessing Shared Energy Storage and Dual Incentive-driven Response 0.75
A distributed dynamic multi-agent reinforcement learning based cooperative game framework for multi-sectoral transaction in electricity markets considering dynamic revenue allocation optimisation and Renewable Energy Certificate trading 0.80
Auxiliary population-assisted differential evolution for multi-area economic dispatch considering valve point effects 0.80
A novel CNN-LSTM-based forecasting model for household electricity load by merging mode decomposition, self-attention and autoencoder 1.00
Bi-level coordinated expansion planning of high-PV-penetration active distribution networks incorporating multiple flexible resources considering WGAN-GP-based uncertainty generation 1.00
Value evaluation model study on shared energy storage adapted to the needs of new power system 1.00
A multi-model multi-method ensemble (4ME) assessment of future photovoltaic potential in northern China 1.00
Informing heating electrification and prosumer-based solutions toward decarbonisation targets via a multi-objective optimization in grid-connected PV systems in rural buildings 0.33
Integrated PV/T coupled PEM system for low-carbon office buildings: Dynamic simulation, multi-energy synergy, and economic analysis 1.00
Optimal operation of shared energy storage-assisted wind–solar–thermal power generation systems under the electricity-carbon markets 0.70
Optimal scheduling of electric-hydrogen hybrid shared energy storage system considering seasonal time scale 1.00
A simple yet effective multivariate long sequence wind speed prediction model for urban blocks with spatio-temporal feature embedding 1.00
EV-integrated and grid-connected hybrid renewable energy system: a two-stage optimization strategy 0.58
Hydraulic characteristics of pumped storage units from startup to no-load before synchronization based on PID control 1.00
Study of an equivalent mechanical model and experimental validation to predict the impact slippage of a full-dimensional PEMFC stack for commercial trucks 1.00
Modelling of asynchronous inertia of induction motor loads and studying the effect on the frequency response of renewable energy power systems with high wind power penetration 1.00
Optimal scheduling of regional multi-energy systems considering low-carbon co-firing strategy and carbon-green certificate equivalence conversion mechanism based on Dynamic-Free Newton-Raphson-based optimizer 1.00
A reverse incentive-based demand response strategy for shared energy storage in industrial microgrids: Optimization, scheduling, and investment analysis 0.83
Pressure pulsations intelligent prediction model for load rejection of pumped storage power station based on data augmentation and one-dimensional convolutional neural network 1.00
Power system source-load forecasting based on scene generation in extreme weather 1.00
Attribution-guided planning for renewable energy generation bases: Synergistic design of ammonia co-firing and renewable energy integration 1.00
Multi-time scale scheduling framework for multi-energy system considering demand response: A self-approaching optimal approach 1.00
Thermoeconomic analysis of a novel liquefied biomethane-Air energy storage system 1.00
Visualization study on the effect of pulsating flow on the two-phase dynamic behavior of proton exchange membrane fuel cells in dead-ended anode mode 1.00
Optimization of dual-module floating photovoltaic arrays: Layout configuration and damping mechanisms for enhanced stability and energy performance 0.75
A search algorithm that couples physical rules for balancing wind and solar output fluctuations via hydropower in ultra-short-term scheduling 1.00
Normalized deep neural network with self-attention mechanism accelerated ADMM for distributed energy management of regional integrated energy systems considering renewable energy uncertainty 1.00
CEEMDAN-SE-HDBSCAN-VMD-TCN-BiGRU: A two-stage decomposition-based parallel model for multi-altitude ultra-short-term wind speed forecasting 1.00
Energy consumption characteristics and energy saving potential of thermal power plants under ultra-low power load ratio conditions 1.00
Dynamic characteristics and performance enhancement of a novel hybrid system integrating transcritical CO2 heat pump and absorption thermal energy storage 1.00
Capacity configuration of a hybrid energy storage system for the fluctuation mitigation and frequency regulation of wind power based on Aquila Optimizer and Variational Mode Decomposition 1.00
Research on ultra-short-term photovoltaic power forecasting using multimodal data and ensemble learning 1.00
Novel wind speed ensemble forecasting system based on the critic weighing principle of fuzzy information granulation and reverse mixed-frequency modeling 1.00
Optimization of electric vehicle charging strategies in residential integrated energy systems: A SARIMA model approach for dynamic electricity prices 0.63
Bridging the gap between economic viability and operational security in power system decarbonization: A temporal optimization approach for multi-period dynamic generation technology investment considering long short-term uncertainties 1.00
User-preference-aware charging scheduling for electric vehicles based on motivation-hygiene theory 1.00
A graph neural model for predicting wind speed behavior based on the effect of wind speed point coupling 1.00
Innovative Framework for EV Charging and Swapping Stations: Optimizing Distribution Networks and Carbon Mitigation 0.80
Bidding-clearing-scheduling coordinated optimization for cascade hydro-wind-photovoltaic alliances in electricity spot markets: A multi-stage framework 1.00
Low-carbon economic dispatch of integrated energy system based on oxygen-driven synergistic hydrogen production utilizing coal and electricity 1.00
Virtual elastic coupling control of grid-forming wind farms for power oscillation suppression 1.00
Minimizing carbon footprint from power generation for electric vehicle charging considering demand uncertainty and grid operation constraints 1.00
An assessment and ranking method on demand response potential for urban-scale buildings based on the energy usage portrait 1.00
Real-time NILM: A lightweight and low power approach 1.00
A Sustainable Framework for Coordinating Multi-Energy Prosumers in Transmission and Distribution Flexibility Markets 0.60
Mixed game approach for local integrated energy systems operation with hybrid energy storage sharing and hydrogen transportation 0.58
Annual performance analysis and optimization of a novel wind-solar hybrid hydrogen production system 1.00
A systematized framework to optimize grid-interactive charging process of electric vehicles integrated with buildings and distributed renewable sources 1.00
A Parallel Distributed Bargaining Mechanism for Joint Electricity-Carbon Trading in Multi-Energy Manufacturing Plant Networks 0.88
Efficient interpretable wind speed prediction system 1.00
TSO-DSO coordination in the joint balancing and flexibility markets considering classification and participation of VPPs 1.00
Dynamic adaptive hierarchical TCN driven by IHOA-VMD optimization for short term load forecasting 1.00
Optimal Hydrogen Market Participation and Energy Dispatch in Multi-Microgrids Using Dual-Delayed Gradient Learning 1.00
Low-Frequency-Data-driven Energy Consumption Prediction for Battery Electric Vehicles: Integrating Continuous Trip Segments and Multi-Task Learning 1.00
Research on Dynamic Economic Scheduling of Plug in Electric Vehicles Based on Improved Ant-Lion Algorithm 1.00
Cabin: A collaborative and adaptive framework for wind power forecasting integrating ambient variables 0.83
Multi-objective energy management of community microgrids based on integrated electricity-carbon pricing 1.00
Enhancing power peak shaving with cascade hydropower: A buffer for wind and solar power uncertainty by deep learning-based data-driven approach 1.00
A dynamic spatiotemporal graph generative adversarial network for scenario generation of renewable energy with nonlinear dependence 0.67
Multi-spatio-temporal Scale Coordinated Dispatch for Modern Distribution Systems with Long-duration Energy Storage 1.00
Real-time online prediction of hydraulic states in pumped hydropower systems based on Kalman filter 0.67
Capacity optimization for minimizing the cost on a hydrogen production system coupling the wind and solar power generation with PEM water electrolysis 1.00
Research on multi-stage day-ahead clearing of electricity spot market considering energy quality under the coupling of electricity-carbon market 1.00
Analysis of energy flow based matrix modeling and collaborative optimization considering different energy storage benefits for multi-energy systems 0.83
Fine-grained ultra-short-term wind power forecasting based on Temporal Fusion Transformers integrated with turbine power time series clustering 0.88
Distributed collaborative model predictive control based on computationally feasible mesh wind farms 1.00
Carbon price prediction based on multidimensional association rules and optimized multi-factor LSTM model 1.00
Electric bus charging scheduling on hybrid wireless charging network: A multi-factor integrated optimization strategy 1.00
Mathematical model and experimental validation of horizontal water level oscillations in surge tanks for hydraulic transient analysis of hydropower system 1.00
Investigation of Savonius hydrokinetic turbine’s 3D structural characteristics affecting cluster performance 1.00
High-efficiency twin-rotor direct-drive marine current turbine: Design, tests, and performance evaluation 1.00
Quantifying the flexibility regulation potential and economic value of pumped storage in extreme scenarios of multi-energy complementary system 1.00
CFD-based hydraulic-mechanical-electrical coupled simulation method for variable-speed pumped storage units 1.00
A novel framework for significant wave height prediction based on Adaptive Feature Extraction Time-Frequency Network 1.00
Short-term scheduling of a hybrid pumped storage-photovoltaic power complementary system considering market-oriented electricity prices 1.00
Study on the applicability of a horizontal well in compressed air energy storage in aquifer 1.00
An AI-based weather prediction method for wind farms combining global forecast field and wind speed temporal transfer characteristics 1.00
Two phase fluid-actuator line-immersed boundary coupling for tidal stream turbine modeling with scouring morphology under wave-current loading 0.42
A novel hybrid ensemble approach for wind speed forecasting with dual-stage decomposition strategy using optimized GRU and transformer models 1.00
A double deep reinforcement learning-based adaptive framework for decision-optimal wind power interval prediction 1.00
Evaluation of multi-period coupling regulation capability of hydropower based on an explicit quantification method 1.00
Optimizing Decentralized Energy Systems: Advanced Models and Power Management Strategies 1.00
Cooperative robust optimization of hydrogen integrated energy systems for economic dispatch under uncertainty with bidirectional power conversion and progressive stepwise carbon emission trading mechanisms 1.00
Reliable and Economic Operation of Regional-Community Integrated Energy Systems: A Hybrid Game Approach Based on State Similarity 1.00
Enhanced wind speed forecasting for sustainable power systems: A deep learning framework unifying deterministic predictions and uncertainty quantification 0.40
Thermodynamic analysis of combined energy storage systems for enhancing load ramp flexibility in a coal-fired power plant 1.00
Scenario Information Gap Planning for Electricity-Gas-Hydrogen Integrated Energy Systems Considering the Impact of Grid Interaction Locations 1.00
Whether the electrochemical energy storage show positive role to achieve the green and low-carbon goal in China 1.00
A hybrid heat load forecasting model based on multistage decomposition and dynamic adaptive loss function 1.00
Multistep interval prediction model with adjustable horizon for uncertain power load forecasting 1.00
Optimization-oriented multi-layer model reconstruction algorithm via objective consensus for renewable-integrated power systems 0.58
A two-stage hybrid stochastic-robust policy of decentralized distributionally energy management for offshore oil and gas platform energy hub coupled with shared energy marine transport fleets 0.80
Resilience-promoting day-ahead schedule in coastal integrated energy system considering subjective uncertainty 1.00
Mesh-based data-driven approach for optimization of tidal turbine blade shape 0.88
A weekly crude oil price interval-valued prediction architecture on fusion of decomposition technique and adaptive integration 1.00
Design and Assessment of V2G Systems for Hybrid Vehicles Based on Fuel Cells, Power Batteries and Photovoltaic Cells 1.00
Flexibility Aggregation and Cooperative Scheduling for Distributed Resources Using a Virtual Battery Equivalence Technique 1.00
A two-stage framework for sizing renewable capacity in a hydro–photovoltaic–wind–pumped storage hybrid system 0.88
Multi-entity pricing-enabled supply recovery for electricity-gas energy system with coordinated flexibilities: a hierarchical game approach 1.00
Hierarchical bidding strategy for heterogeneous P2H loads and wind power: state-driven aggregation and switching time scheduling 0.75
Incremental principal component analysis based depthwise separable Unet model for complex wind system forecasting 1.00
Economic dispatch model for a hydropower-wind-photovoltaic system with pumping installations to respond to uncertainties 1.00
Geographic Information System and EnergyPLAN-Based Assessment of Pumped Hydro Storage Potential for Renewable Integration in the Power Grid 0.88
Wide angle range wind direction ultra-short-term interval prediction based on an improved loss function 1.00
Two-stage Distributionally Robust Bidding Strategies for Multi-Energy Virtual Power Plants in Energy, Reserve and Carbon Markets 1.00
Cluster-type open-loop pumped storage power stations with hydraulic connections exacerbate water level fluctuations of conventional hydropower stations and alter hydropower flexibility 1.00
Two-stage optimal scheduling strategy for electric-hydrogen integrated energy stations considering demand response in energy and reserve services markets 1.00
Aggregation and packaging of distributed energy resources: A time-coupled flexibility-demand-oriented method 1.00
Multi-step prediction of spatio-temporal wind speed based on the multimodal coupled ST-DFNet model 0.92
Impact of terrain on inflow factors and wind turbine vibrational responses: Insight from SCADA data and wind tunnel tests 0.75
Long-medium-short term nested operation model of hydro-wind-solar hybrid power system considering flood control, power generation, ecology and navigation 1.00
A novel discrete multivariable grey model with seasonal time-lag effect for clean energy generation forecasting 1.00
A Zero-Shot Load Forecasting Method for Extreme Weather Integrating Causal Learning and Meta-Learning 1.00
Mixed-Frequency Data-Driven Forecasting of Thermal Coal Price: A Novel Hybrid Model 1.00
Triple-level cost-effective sizing optimization for solar-powered hybrid hydrogen system with PEM and alkaline electrolyzers 1.00
Energy, exergy, economic and environmental (4E) analysis of a solar-coal hybrid system with calcium-looping thermochemical energy storage and carbon capture for power and methanol coproduction 1.00
Risk-aware low carbon optimization of hydrogen-oriented multi-energy system with linear approximation of bi-product fuel cell 1.00
Stochastic Designing of a Hybrid System with Hydrogen Energy Management Based-Fuel Cell Using Machine Learning and Improved Arithmetic Optimization Algorithm for Building Electrification 0.33
Short-term scheduling strategy of hydro-photovoltaic complementary system under high water level and limited storage conditions of cascade reservoirs in Kashgar 1.00
Solid packed bed storage-based flexible retrofit solution for power plants: Novel method for multi-heat source contribution and thermal performance regulation 1.00
DBANN: Dual-Branch Attention Neural Networks with hierarchical spatiotemporal-perception for multi-node offshore wind power forecasting 1.00
Towards power-to-X and carbon capture technologies for decarbonized green cities: A multi-layer cost-effective energy scheduling approach in integrated energy systems for targeting carbon footprint reduction 1.00
Bi-level operation model for energy hub based on energy-carbon coordination optimization framework 0.83
Collaborative configuration optimization of renewable energy generation capacity for islanded microgrid clusters: A decision-making framework based on multi-criteria flexible interaction and shared mobile energy storage 1.00
Explainable end-to-end prediction of remaining driving range for electric vehicles based on balanced ensemble transformer 0.75
Mixed integer linear programming-based optimal capacity configuration of ALK/PEM mixed water electrolysis system 1.00
EV charging scheduling under limited charging constraints by an improve proximal policy optimization algorithm 1.00
Multi-feature extraction spatio-temporal interaction graph network for wind speed forecasting in windfarm 1.00
Multi-timescale optimization scheduling of integrated energy systems based on high-accuracy predictions 1.00
The novel operation strategy of CCHP-GSHP-PV system based on device complementary characteristic considering different storage electricity modes 1.00
Analysis of galloping competition characteristics and energy harvesting capacity of TGPEH based on stiffness ratio design 1.00
Interval Carbon Emission Flow Model and Bi-Level Branch-and-Bound Algorithm for Power Systems Considering Renewable Energy Uncertainty 0.89
ANN-assisted optimization of a solar-to-X system for green hydrogen production, CO2 capture, and methanol-based energy storage 0.78
Distributionally Robust Dispatch Method with Enhanced Wind Power Frequency Support Modeling and Inherent Decision-Dependent Uncertainty 1.00
An offshore wind speed forecasting system based on feature enhancement, deep time series clustering, and extended LSTM 1.00
Bayesian Distributionally Robust Optimization based day-ahead optimal dispatch in hybrid AC–DC distribution networks 1.00
Joint dispatch and economic collaboration of multiple regional energy systems via Transformer-based load prediction and two-stage stochastic optimization 0.58
Time-series imaging for improving the accuracy of short-term load forecasting 1.00
Benders decomposition for charging station location-routing problem with time-dependent travel times: a space-time-electricity network perspective 0.83
Two-Layer Decomposition-Fused Hybrid Deep Learning Enables Data-Driven Electricity Demand Forecasting for Battery Swapping Station 0.92
Optimal scheduling and benefit sharing of hybrid pumped storage hydropower plants with multiple operators 1.00
Benefits evaluation method for short-term scheduling of cascade hydropower station group in historical data-scarce regions 0.79
A constant pressure compressed CO2 energy storage with water compensating: comprehensive thermo-economic analysis 1.00
A Demand Response Strategy for Direct Expansion Air Conditioning Systems Combining Self-Modeling and Reinforcement Learning 1.00
Dual-path frequency Mamba-Transformer model for wind power forecasting 1.00
Energy hubs integrating renewable energy sources and demand response programs for cost-effective operations 1.00
Resilient distributed economic dispatch for cyber–physical power systems considering carbon emissions trading and false data injection attacks 0.67
Multi-objective optimization and mechanism analysis of integrated hydro-wind-solar-storage system: Based on medium-long-term complementary dispatching model coupled with short-term power balance 1.00
Optimal coordinated management of integrated electricity-heat-computation systems in geographically distributed data centers 1.00
Distributionally robust frequency constrained low-carbon scheduling considering flexibility of carbon capture power plants 1.00
Unveiling the impact of base model selection in heterogeneous ensemble learning for building energy prediction 1.00
Beyond the S-region instability: A 3D blade reshaping strategy to unlock stable pump-turbine operation for enhanced grid flexibility 1.00
AI-based integration of flexible diverse electricity aggregators in multiple electricity markets under uncertainty 1.00
Optimization of Electro-Hydrogen Energy Storage Configuration in Off-Grid Wind-Solar-Hydro Complementary Systems 1.00
Identifying the ecological operating space for explicit decisions of hydro–hydrogen–wind–photovoltaic hybrid power systems 1.00
A novel liquid CO2 energy storage system incorporating supplementary oxy-fuel combustion 1.00
Performance evaluation and cost optimization for electric vehicle charging stations 1.00
A Novel Stacked Ensemble Framework with the Kolmogorov-Arnold Network for Short-Term Electric Load Forecasting 0.67
Multi-objective multi-stage distributionally robust chance-constrained low-carbon planning model for a novel integrated multi-energy microgrids incorporating data center considering real-time workload response and multiple uncertainties 1.00
Enhancing Flexibility of Coal-Fired Power Plants via Compressed Air Energy Storage Integration: A 4E (Energy, Exergy, Economic, Environmental) and Operational Performance Analysis 1.00
A two-stage optimal dispatch model for wind-storage-carbon capture power plants considering carbon emission and green certificate trading 0.86
Dynamic energy hub-based planning and operation for optimal integration of variable energy conversion efficiency in community-level energy systems 0.67
Formation of soil plug in bioinspired scaled suction caissons in sand for offshore wind turbine 1.00
Dual-timescale scheduling approach for power systems with Energy-intensive loads: Wind power accommodation through forecast deviation decomposition and flexible resource coordination 1.00
A novel net load prediction approach using multi-scale deep learning network based on Trend-Multi-Period encoder and segment imbalance regression 1.00
Optimal scheduling of electric-gas-thermal-hydrogen integrated energy system considering uncertainties and safe guarantee: A TD3-MIP-based approach 1.00
The influence of peak wave-channel clearance on performance characteristics of traveling wave pump 1.00
A Wasserstein metric distributionally robust chance-constrained peer aggregation energy sharing mechanism for hydrogen-based microgrids considering low-carbon drivers 1.00
Thermodynamic and economic analyses of a novel liquid carbon dioxide energy storage system incorporated with a coal-fired power plant 0.83
A two-stage distributionally robust optimization operation scheduling model for solar PT-PV systems based on integrated load consumption prediction 1.00
A method for reverse-inferring fuel gas composition from flue gas information based on residual network and physical constraints 1.00
Two-time scale microgrid scheduling based on power fluctuation mitigation priority and model predictive control 1.00
A hybrid wind speed forecasting model with rolling mapping decomposition and temporal convolutional networks 0.83
Design and multi-objective optimization of co-production system of hydrogen and electricity via integration of methanol steam reforming, fuel cell and electrochemical hydrogen pump 1.00
Performance analysis and optimization of an adiabatic compressed air energy storage system coupled with the packed-bed thermal energy storage device 1.00
An additional guide vane opening control for doubly-fed variable-speed pumped hydro storage to improve frequency response 1.00
Firm power generation with photovoltaic overbuilding and pumped hydro storage 1.00
MIG-EWPFS: An ensemble probabilistic wind speed forecasting system integrating multi-dimensional feature extraction, hybrid quantile regression, and Knee improved multi-objective optimization 1.00
A short-term wind power prediction based on MCOOT optimized deep learning networks and attention-weighted environmental factors for error correction 1.00
Co-optimized operation of electrified transportation systems considering mixed human and automated traffic flows 1.00
A multi-energy load forecasting method based on the Mixture-of-Experts model and dynamic multilevel attention mechanism 1.00
Empowering household energy transition: The impact of digital economy on clean energy use in rural China 0.75
Real-time nested scheduling model with embedded adaptive charging–discharging strategy considering EV uncertainty 1.00
Design and optimization of a solar distributed energy system based on a power-methanol-power path 1.00
Exergy Efficiency Based Multi-objective Configuration Optimization of Energy Hubs in the Multi-energy Distribution System 1.00
Power loss minimization-oriented reactive power control for wind farm equipped with distributed energy storages using clustering-based data-driven method 0.86
Optimization of integrated energy systems in low-carbon community considering vehicle-to-building and the mobility of electric vehicles 0.89
Load forecasting for iron and steel industry based on hybrid mechanism- and data-driven 1.00
An electric vehicle charging station operation model with hourly capacity mechanism 1.00
Optimal Energy Management of Multi-Energy Multi-Microgrid Networks Using Mountain Gazelle Optimizer for Cost and Emission Reduction 1.00
Closed-loop integrated prediction-and-dispatching framework for unit commitment in power system with renewables and hydrogen energy 1.00
Forecasting natural gas prices using a novel hybrid model: Comparative study of different sliding windows 0.86
Using machine learning to achieve highly efficient solutions of frequency-constrained unit commitment models 1.00
Strategy research on variable load carbon price and demand response of integrated energy system based on Stackelberg game and cooperative game 1.00
A hybrid framework for short-term load forecasting based on optimized InMetra Boost and BiLSTM 1.00
Multi-time scale game dispatching strategy for microgrid cluster with shared energy storage considering demand response uncertainty 1.00
A composite robust adaptive control for double-fed variable-speed pumped storage units considering stochastic uncertainty 0.75
P-KTFNet: A Prior Knowledge Enhanced Time-Frequency Forecasting Model for Natural Gas Consumption 0.94
Transient Vibration Analysis of Multi-System Coupling in Pumped Storage Power Stations: Insights into Cavitation-Induced Flow and Shaft Dynamics 1.00
Complementary operation optimization of cascade hydropower reservoirs and photovoltaic energy using cooperation search algorithm and conditional generative adversarial networks 1.00
Two-stage Distributionally robust optimization for hydrogen-IES participation in energy-carbon trading-frequency regulation ancillary services market 1.00
Accurate photovoltaic power prediction via temperature correction with physics-informed neural networks 1.00
Extraction and Application of Intrinsic Predictable Component in Day-ahead Power Prediction for Wind Power Cluster 1.00
Techno-economic assessment and optimized performance of a multi-generation setup composed of a wind turbine and a compressed air energy storage system 1.00
Probabilistic Power Forecasting for Wind Farm Clusters Using Moran-Graph Network With Posterior Feedback Attention Mechanism 1.00
Few-shot wind power prediction using sample transfer and imbalanced evolved neural network 1.00
Strategic Site-Level Planning of VRE Integration in Hydro-Wind-Solar Systems Under Uncertainty 0.80
Experimental investigation on effect of drag-reduced cavitation on stability of a blub turbine 1.00
Industrial energy organizations: cost sharing, grid effect, and storing energy development 1.00
Research on capacity configuration optimization of integrated energy system by integrating energy hub and response surface methodology 1.00
Optimization of dynamic compressed CO2 energy storage system: The role of supercritical fluid properties 1.00
An optimal multi-scale ensemble transformer for carbon emission allowance price prediction based on time series patching and two-stage stabilization 1.00
Multi-timescale photovoltaic station power prediction based on Reformer model 1.00
A low-carbon trading strategy of multi-microgrid system considering electricity-hydrogen-carbon coupling characteristics 1.00
Reliability Assessment Method of Wind Power DC Transmission System Based on Level Fault Tree Analysis 1.00
Highway Self-contained Multi-microgrid Energy Management Strategy Based on Universal Gravitation 0.80
Optimal bidding strategy for integrated energy system participating in spot power market: A Wasserstein metric based DRO method 1.00
Enhanced near zero-energy building performance through intelligent hydrogen storage management across diverse climates 0.14
Bi-Level Four-Stage Optimization Scheduling for Active Distribution Networks with Electric Vehicle Integration using Multi-Mode Dynamic Pricing 0.83
Enhanced schedule optimization with cross-scale coupling for microgrid with hybrid energy storage system 1.00
Cost-carbon-water nexus analysis of a biomass-wind-solar integrated cogeneration system: A system and ecological perspective 0.93
A Privacy-Protected Distributed Operation Method for Flexible Distribution Networks with EV Charging Load Clusters 1.00
A probabilistic load forecasting method for multi-energy loads based on inflection point optimization and integrated feature screening 1.00
An interpretable deep learning framework for photofermentation biological hydrogen production and process optimization 1.00
A reliability-centered maintenance process for equipment in distribution grids based on extended virtual age model 0.20
Hydro-wind-PV-storage complementary operation based on a multivariate 3D power generation database considering comprehensive utilization tasks of cascade hydropower stations in the river basin 1.00
83 70.36
Stable perovskite–organic tandem solar cells enabled by chloride-doped evaporated wide-bandgap perovskites 0.10
Synergistic regulation of crystallization and the buried interface in CsxFA1−xPbI3 perovskite photovoltaics using a multifunctional sulfonyl–ammonium additive 0.86
Breaking the efficiency bottleneck of inverted organic solar cells by reversed sequential deposition 0.70
Photothermal-stable pure-iodide wide-bandgap perovskite solar cells with suppressed ionic losses 1.00
In situ surface matrix solidification of FAPbI3 perovskite quantum dots for solar cells with 19.37% efficiency 1.00
Cr–O–In interlocking for window layer delamination resistance in operationally stable perovskite/silicon tandem solar cells 1.00
Synergistic steric–dipole modulation via stepwise trifluoromethyl substitution enables active-layer hierarchical assembly and >20% power conversion efficiency in organic photovoltaic devices 1.00
Thermodynamic inhibition of bromine-rich phase nucleation in wide-bandgap perovskites for operationally stable tandem solar cells 0.99
Stabilizing the pure phase of FAPbI3 perovskites enabled via a solid–liquid low entropy ink strategy 1.00
Reductive electron redistribution enables ultrafast charging in magnesium batteries 1.00
Lattice chemistry damping stabilization enables voltage stability and oxygen redox reversibility in Li-rich layered oxides 1.00
Self-adaptive interfacial glue for low-pressure sulfide-based all-solid-state lithium metal batteries 1.00
Multiphosphorylated molecules for buried interface regulation of inverted perovskite solar cells in a two-step process 0.71
A simultaneous synergistic protection mechanism in hybrid perovskite–organic multi-junctions enables long-term stable and efficient tandem solar cells 0.06
Hydrogen-bond-driven synergistic regulation of crystallization and interfacial coupling in 1.85 eV wide-bandgap perovskites for high-performance organic tandem solar cells 1.00
Lattice-coherent epitaxial surface engineering in highly stable Co-free ultrahigh-Ni cathodes 0.90
Synchronizing crystallization enables thermally stable all-FA Pb–Sn perovskites for printable MA-free all-perovskite tandem solar cells 0.91
Universal non-destructive interconnection layer engineering for efficient and stable perovskite tandem photovoltaics 1.00
Chemical bridging in a 2D/3D heterojunction via dual-anchoring functionalized molecules for efficient, stable and flexible perovskite solar cells 1.00
<atl>Enhanced interface regulation ivia/i π-conjugated heterojunctions for high-efficiency inverted perovskite solar cells</atl> 0.95
Photostable wide-bandgap perovskites with enhanced interface coupling for all-perovskite tandems 1.00
Machine learning-accelerated discovery of multi-cation entropy-stabilized NASICON solid electrolytes with 10 000 hours of stable Na plating/stripping for all-solid-state sodium batteries 1.00
Spatially resolved modeling of pumped storage and hydropower for China's carbon neutrality 0.80
Multidentate silane bridging for stable and efficient perovskite–organic tandem solar cells 1.00
Dielectric molecular-bridges enable durable inverted perovskite solar cells with 26.60% efficiency and a high reverse breakdown voltage 1.00
Blocking multifaceted degradation pathways via fluorinated hydrogen-bond armor for stable perovskite solar cells 1.00
Robust interfaces via synergistic cation–anion manipulation for highly efficient and stable inverted perovskite solar cells 0.75
Interface molecular orientation engineering-induced field reversal for efficient inverted perovskite solar cells 1.00
Unveiling the single-solvent vacuum-flash process for high-efficiency perovskite solar cells 1.00
Halide-mixing braking strategy for 1.95 eV wide-bandgap perovskites enabling high-efficiency triple-junction tandems 1.00
A regenerable redox mediator for all-air processed wide-bandgap perovskite solar cells under high-humidity conditions 0.88
Tailoring short-range mobility at donor–acceptor heterointerfaces through small molecules promotes efficient organic solar cells 0.72
Molecularly guided buried-interface regulation for efficient and stable inverted perovskite solar cells 1.00
Balancing the supersaturation rate and coordination capability for upscaling high-performance perovskite photovoltaics 0.69
Boron–halide interactions for crystallization regulation of a 1.68 eV wide-bandgap perovskite prepared via a two-step method 0.63
Ion Exchange-Induced LixMgyBOz Coating Synergized with Reinforced Bulk Doping Enables Fast-Charging Long-Cycling High-Voltage LiCoO2 1.00
Induced oriented attachment of a ZnO electron transport layer enables over 20% efficiency in solution-processed conventional organic solar cells 1.00
Bimolecular amine vapor passivation for efficient perovskite solar cells based on blade-coated FAPbI3 1.00
Freezing the p–i–n interlayer with a symmetric phenolic compound to achieve favorable vertical morphology and efficient pseudo-planar heterojunction organic solar cells with excellent stability 1.00
A universal strategy toward homogenized metal oxide/perovskite contact for efficient solar cells and modules fabricated in ambient air 1.00
Bottom directional deposition perovskite heterojunctions for efficient and stable lead halide perovskite/silicon tandem solar cells 1.00
A weakly solvating solvent-based quasi-solid electrolyte for sodium metal batteries 0.40
Synergistic tuning of inner and outer Helmholtz layers for ultra-stable fast charging in lithium-ion batteries 1.00
Two-terminal perovskite/Cu(In,Ga)Se2 tandems with conformal coatings based on commercial bottom cells with >26% efficiency 1.00
Consecutive surface matrix engineering of FAPbIsub3/sub perovskite quantum dots for solar cells with over 19% efficiency 1.00
A dual-site additive mediated crystallization strategy for homogenized FA–Cs based perovskite solar cells 1.00
Accelerating lattice oxygen kinetics of layered oxide cathodes via active facet modulation and robust mechanochemical interface construction for high-energy-density sodium-ion batteries 0.83
All-solid-state batteries stabilized with electro-mechano-mediated phosphorus anodes 0.84
Anchoring ligand engineering enables highly stable MA-free perovskite solar cells with a minimal VOC deficit of 0.32 V 0.15
Exposing binding-favourable facets of perovskites for tandem solar cells 0.11
Upcycling waste photovoltaic cells into silicon carbide via flash Joule heating 0.43
Interface parallel dipole regulation in all-perovskite tandem solar cells 1.00
Double amidino-mediated multiple hydrogen-bonded Dion–Jacobson perovskites enable oriented crystallization for efficient inverted FAPbI3 solar cells and modules (642 cm2) 0.88
Customizing vertical electrodeposition orientation and interfacial solvation to endow magnesium metal anodes with ultrahigh areal capacity 1.00
Synergistic cooperation between photovoltaic and thermoelectric effects in solar cells 0.82
Configurational entropy-tailored NASICON cathode redox chemistry for capacity-dense and ultralong cyclability 0.70
Multi-physics mechanisms and regulation of perovskite grain boundaries: insights into carrier dynamics, ion migration, thermodynamics, and thermal stress 1.00
Intermolecular interactions triggered crystallization phase transition regulation for efficient and stable perovskite photovoltaics 1.00
A spatial structure regulation strategy modulated the solubility and compactness of novel face-on oriented bisphosphonate-anchored SAMs for efficient inverted perovskite solar cells 1.00
Interfacial engineering of dopant-free phthalocyanine hole transporters for >22% efficiency perovskite solar modules 1.00
Isomeric selenasumanene-pyridine-based hole-transporting materials for inverted perovskite solar cells 0.89
High-areal-capacity Na-ion battery electrode with high energy and power densities by simultaneous electrospinning-spraying fabrication 0.31
Balanced electron and hole transfer behavior enabled approaching 19% efficiency in thick-film organic solar cells with improved fill factor 1.00
Design of strong and weak intermolecular interactions to engineer buried interfaces in inverted wide-bandgap perovskite solar cells 0.09
Ionic potential modulation within and between layers of transition metal oxides towards ultrahigh-rate sodium storage 1.00
Molecular integration of Lewis bases for efficient and stable inverted perovskite solar cells 1.00
Dual-site passivation by heterocycle functionalized amidinium cations toward high-performance inverted perovskite solar cells and modules 0.86
Halogen anion pre-homogenization of sequentially deposited wide bandgap perovskites for commercial textured perovskite/silicon tandem solar cells 1.00
Navigating low state of charge phase transitions in layered cathodes for long-life sodium-ion batteries 0.85
In situ molecular compensation in wide-bandgap perovskites for efficient all-perovskite tandem solar cells 0.75
Synergy of phase and interface engineering of manganese difluoride enables high-efficiency potassium-ion batteries 1.00
Biomass-derived functional additive for highly efficient and stable lead halide perovskite solar cells with built-in lead immobilisation 0.36
Achieving 20% efficiency in binary organic solar cells with suppressed non-radiative recombination via triphenylamine halides 0.88
One-stone-two-birds: over 26% efficiency in perovskite solar cells via synergistic crystallization & interface regulation 1.00
Optimization of crystallization dynamics in wide-bandgap bromine–iodine perovskite films for high-performance perovskite–organic tandem solar cells 1.00
Mitigating chemo-mechanical heterogeneity of Ni-rich layered cathodes through the regulated medium-range order by doping 0.54
A universal surface fixed charge reconstruction strategy to minimize contact loss in wide bandgap perovskite photovoltaics 1.00
Synchronous dimension-crystallization engineering enables highly efficient 2D/3D tin perovskite solar cells 1.00
Incorporating a lithium-deficient layer and interfacial-confined catalysis enables the reversible redox of surface oxygen species in lithium-rich manganese-based oxides 1.00
Comprehensive crystallization retardation of inorganic perovskites for high performance inverted solar cells 1.00
Operando single-particle imaging reveals that asymmetric ion flux contributes to capacity degradation in aged Ni-rich layered cathodes 0.04
A green-solvent-processable polymer hole transport material for achieving 26.31% efficiency in inverted perovskite solar cells 1.00
High-performance inverted perovskite solar cells and modules ivia/i aminothiazole passivation 1.00
5 3.25
Trade-Offs between Grid Connectivity and Operational Flexibility in Reducing the Cost and Carbon Footprint of Green Ammonia 0.25
Solar Photovoltaic Development in West Africa Will Face Million-Ton Waste Challenges, and Off-Grid Systems Will Dominate 0.30
Impact of Climate Change on Interregional Transmission during China’s Power System Decarbonization 1.00
Life Cycle Greenhouse Gas Emissions and Mitigation Performances of Various Hydrogen Production Routes 0.70
High Spatiotemporal Availability of Hydrogen by Electrolysis of Municipal Reclaimed Water in China 1.00
2 2.00
A Predictive Model of the Position of Plasmapause Based on Lunar Phase and Deep Learning Framework 1.00
STARNet: A Deep‐Learning Algorithm for Surface Shortwave Radiation Retrieval From Fengyun‐4A 1.00
10 10.00
Phase and Structural Evolution in Molten Inorganic Salts of Molybdenum Borides for Electrochemical Applications 1.00
Regulating Lattice Robustness and Lithium-Ion Kinetics via Complex Multielement Substitution for Durable LiNiO2 Cathodes 1.00
Dynamic Order–Disorder Conversions of Specific Facets in a Metal–Organic Framework: Chemically Reversible Iodine-Immobilization for Sodium–Iodine Batteries 1.00
Pressure-Induced Enhancement of Ionic Conductivity and Interstitial Migration Capability in Li3PO4 1.00
Oxygen Vacancy Engineering toward Enhanced Dielectric and Ionic Conductivity Properties in Single Crystal LiNbMoO6 1.00
Asymmetric Configuration of Amorphous Mn–S Adjacent to Low-Nucleated MnS in N-Doped Carbon for Advanced Sodium-Ion Hybrid Capacitors 1.00
Triple Stabilization of Phase, Electron, and Cation to Enhance the Lithium Storage Performance of High-Voltage Medium-Ni, Low-Co Layered Oxide Cathodes 1.00
Investigation of Al3+ Doping Effect on LVP Cathode: Structure Evolution and Magnetic Transition 1.00
Dual Carbon Modification and Pore Structure Regulation of CuS/FeS2 Bimetallic Sulfides via Multifunctional Additives toward High-Rate and Durable Sodium Storage 1.00
Single-Crystal, Highly Ni-Rich LiNi0.9Co0.055Mn0.045O2 Cathode Material: Spray Pyrolysis Synthesis and Grain Size Regulation 1.00
57 53.00
Performance assessment of large-area proton exchange membrane fuel cells with metal foam flow fields 1.00
Knowledge-embedded deep reinforcement learning for real-time dispatch of wind-solar-hydro hybrid generation systems 1.00
Constrained aggregated approach for charging station using federated multi-agent deep reinforcement learning 1.00
Federated reinforcement learning-based dynamic hosting domain for electric vehicles charging management in distribution networks with renewable energy resources 1.00
Collaborative optimal scheduling of CIES based on Stackelberg game considering carbon tax allocation 0.92
Cycle efficiency and economic analysis of the Ca-looping thermochemical Carnot battery for coal-fired power plants 1.00
Pathways for clean energy transition in rural China: Natural gas vs. photovoltaic power 1.00
Data-driven optimization of heterogeneous time-of-use pricing for electric vehicle fleets 1.00
Interfacial electron-rich centers in MoOx/fine slag derived from mining waste enable durable Li-O2 batteries with enhanced kinetics 1.00
Optimal capacity configuration of the wind-solar-hydrogen multi-energy system for green data computing centers: An integrated AI forecasting and improved multi-objective optimization approach 1.00
Scaling artificial photosynthesis: Economic and operational triumphs of photoelectrochemical-enriched solar hydrogen plants 0.60
Optimization of hydrogen blending locations in natural gas pipeline networks with the objective of satisfaction 1.00
Assessment of suitability for photovoltaic plant siting and planning of power transmission corridors in China 0.90
Optimized scheduling of multiple integrated energy systems considering hydrogen energy transportation 1.00
Synergistic optimization of computing-power-cooling-heat multi-energy flow: Integrating flexible data centers and district heating networks 1.00
Global fine-scale assessment of the technical and economic potential of solar photovoltaic power using Google Earth Engine 1.00
Decarbonizing fossil-to-chemicals conversion: reliable real-time optimization under coupled chemical and carbon capture dynamics 1.00
A fast and accurate multi-user load forecasting method based on coupled traditional neural networks and a time-series large model 1.00
The spatiotemporal challenge of carbon lock-in from material stocks in China's power generation infrastructure 1.00
Spatio-temporal photovolatic power forecasting via Bayesian-optimized dynamic graph convolutional networks with temporal convolutional networks 1.00
Optimizing China's regional power generation structure for cost-effective emission reduction: A multi-scenario analysis integrating CCUS and policy pathways 1.00
Evaluating environmental–economic synergies of hydrogen production pathways: Insights from a life cycle perspective 1.00
Privacy preserving reserved pricing & energy allocation mechanism for smartgrid peer-to-peer energy trading 0.80
Can artificial intelligence promote urbanization processes in harmony with carbon emissions abatement? 1.00
Power load analysis and configuration optimization of a hybrid microgrid integrating food waste-to-biogas and photovoltaics 0.75
Evaluation of floating photovoltaic deployment potential and associated environmental benefits on China's lakes and reservoirs 1.00
Dynamic suitability site selection and policy pathway for decommissioned photovoltaic recycling in China: Integrating spherical fuzzy sets and dynamic computable general equilibrium model 0.83
Synergizing artificial neural networks with SSP-RCP scenarios: Long-Term projection of residential electricity demand in China under climate-economic interactions 0.88
Resilient planning and operational management of renewable-integrated hydrogen refueling stations with multiple storage units under delivery delays 0.17
Optimal planning of charging stations considering electric vehicles’ temporal-spatial charging scheduling 1.00
The green open-vehicle routing problem driven by heterogeneous energy sources for urban roads 1.00
Strategic bidding for coal-fired generation units considering China's deep peak regulation capacity market 0.80
A Short-Term Forecast Method for Electricity Carbon Emission Factor with High Temporal and Spatial Resolution 1.00
A study on two-stage stochastic optimization scheduling of electro-hydrogen microgrid system considering supply-demand cooperation strategies and improved income allocation model 1.00
Optimizing wind-solar synergies in China with spatiotemporal analysis and climate change impacts 0.86
Co-optimization of distributed energy systems: A three-layer framework leveraging a novel diagram-driven method 1.00
Assessing China's wind-solar energy potential and complementarity under climate change: An environmental adaptability perspective 1.00
Battery energy storage system sizing optimization in smart microgrid with virtual energy storage system and behind-the-meter photovoltaic systems 1.00
Low-carbon optimal scheduling integrating precision plant carbon sequestration supplementation with energy system synergy in rural full-chain carbon cycles 1.00
Economic and climate benefits of vehicle-to-grid for low-carbon transitions of power systems: A case study of China's 2030 renewable energy target 1.00
Decision-driven uncertainty management in multi-energy virtual power plant: A robust multi-market scheduling framework 1.00
Lifetime and power generation evaluation of offshore floating photovoltaic systems considering wave motion and photovoltaic module degradation rates 1.00
Multi-objective optimal Bi-level scheduling of hybrid mobile-stationary energy storage systems for flexible distribution network 0.73
Full life cycle remaining useful life prediction of offshore wind turbine bearings based on digital twin and improved DeepESN 1.00
Optimal economic sizing of energy storage system for trolley assisted battery electric mining haul truck considering battery degradation 1.00
The driving effect of artificial intelligence on green total factor energy efficiency: Evidence from China's provincial data 1.00
Artificial intelligence as heterogeneous agents in environmental performance: The mediating role of energy transition and the moderating effect of green technology adoption in Belt and Road Initiative countries 1.00
Performance and feasibility assessment of near-isothermal compressed air energy storage in aquifers 0.20
Optimization and efficiency Enhancement of multi-energy systems in integrated energy Parks: A comprehensive analysis of adaptive strategies and dynamic management 1.00
Integrating allocation methods and regional optimization in life cycle assessment of floating photovoltaics for cleaner energy transitions in China 0.71
Economic dispatch strategy of electricity–gas integrated energy system based on paid carbon emission allowance allocation 1.00
An effective method for predicting the ecosystem carbon budget under the influence of photovoltaic development: A support vector machine model optimized with an improved sparrow search algorithm 1.00
Optimal scheduling of industrial park integrated energy systems considering dynamics of multiple fluid networks 1.00
Understanding cross-market strategic behaviors of prosumers: An equilibrium-driven evolutionary game approach 0.86
Electricity Pinch Analysis Method 1.00
Deep fuzzy inference system fused with probability density function control for wind power forecasting with asymmetric error distribution 1.00
Environmental Impacts and Carbon Reduction Benefits of Mining Photovoltaic Systems: A Case Study of Ningdong Coal Base 1.00
57 48.42
Visualization of Stochastic Nucleation and Confined Propagation in Graphite Lithiation 1.00
Rational Design of High-Na P2-Type Cathodes for Sodium-Ion Batteries: Unveiling Phase Formation Principles and Composition–Structure–Performance Correlations 1.00
Hydrogen Bonding Enhanced Molecular Assembly of Hole-Selective Contact for Thermally Stable Perovskite Solar Cells 1.00
Roles of Slab-Gliding-Induced Surface Nano-Steps in High-Voltage Instability of LiCoO2 1.00
Staged Lithiation/Delithiation of Silicon Anode in All-Solid-State Batteries Revealed by High-Stack-Pressure Operando NMR Spectroscopy 1.00
Photoelectrocatalytic Chemical Pathways in Photoassisted Lithium–Sulfur Batteries via a Multiscale Graph-Based Machine Learning Framework 0.86
Suppressing Cascade Degradation of Lithium-Rich Manganese-Based Cathodes via Singlet Oxygen/Free Radical-Intercepting Binder 1.00
Interlayer Superstructure Stabilized Oxygen-Redox Ni- and Co-Free Cathodes 0.82
Droplet-like Na/Vacancy Ordering Enables Ultrahigh-Na-Content P2-Type Oxide Cathodes 1.00
Covalent Quantum Bridging Enables Bicontinuous Electron–Ion Highways in Hard Carbon for Ultrafast Sodium Storage 1.00
Bifunctional D−π–A Ligand Directs Self-Organized Interface Passivation for Efficient Perovskite Photovoltaics 1.00
Ultrahigh-Nickel Cathodes with B/Al Codoped Gradient Interface for High-Energy All-Solid-State Lithium Batteries 1.00
Regulating Na-Ion Occupations of P-Type Na0.67Ti0.10Fe0.05Mn0.85O2 for Improving Electrochemical Reversibility and Kinetics 1.00
Out-Of-Plane Symmetry Design Arrests Structural Evolution in Layered-Type Framework for Sustainable Sodium Shuttling 1.00
Designing Multifunctional Catalysts for Lithium–Oxygen Batteries via an Amine–Epoxide Ring-Opening Reaction 1.00
Aqueous Magnesium-Ion Battery Anode with 75,000 Cycles Lifespan 1.00
Interface-Mediated Jahn–Teller Effect in a Structure-Reinforced LiMnO2 Cathode 0.68
Homogenized Optoelectronic Properties in Perovskites: Achieving High-Efficiency Solar Cells with Common Chloride Additives 0.33
Surface Superlattice-Induced Spatial Confinement Enables High Voltage and Long Cycle Life in Li–CO2 Batteries 0.82
Amorphous–Crystalline High-Entropy Electrocatalysts for H2 Evolution in High-Power Aluminum-Based Fuel Cells 0.86
Fused-Ring Electron Acceptors as a Versatile Additive Platform for Efficient Perovskite Photovoltaics 0.88
Atomic Resolution of Solid–Electrolyte Interphase Formation via Off-Lattice On-the-Fly Kinetic Monte Carlo 1.00
Bubble Management via Synergy of Dual-Gradient Electrodes and Electrolytes for High-Efficiency Water Electrolysis 1.00
Suppressing Fe Migration for Highly Reversible Oxygen Redox of Sodium-Ion Layered Oxide Cathode 1.00
Decoding the Oxygen Activity with Iron through Ligand-to-Metal Charge Transfer in Li-Rich Layered Cathodes 0.67
Strengthened Perovskite/SAM Heterointerface for Stable Perovskite Solar Cells 1.00
3D Macroporous Engineering of Metal Sulfide-Based Materials for High-Capacity and Ultrastable Potassium Storage under Room and Extreme Temperatures 1.00
Direct Charge-Transfer Transition Drives Triplet Generation and Photon Upconversion in 2D Hybrid Perovskites 1.00
Potential-Driven Selective Na Metal Deposition-Enabled Interphase with High Lithium Dendrite Suppression Capability 0.80
Unlocking Intrinsic Voltage Plateaus of Conversion-Type Fluoride Cathodes via Sulfur-Mediated Dynamic Charge Redistribution 1.00
Tailored Electron-Deficient Macrocycles Guiding the Perovskite Crystallization Process for Solar Cells 0.50
Li Atomic Diffusivity: A Key Descriptor for Critical Current Density and Cycling Stability in Alloy Anodes for All-Solid-State Lithium Batteries 1.00
Gas–Liquid Decoupling Transport by Self-Draining in the Anode of Anion Exchange Membrane Fuel Cells 1.00
Perovskite/CIGS Tandem Solar Cells with over 1000 h Operational Stability through Interconnection Stress Relief 1.00
Tandem Topotactic Reactions for Low-Temperature Synthesis of Ni-Rich Layered Oxide Cathodes without Anti-site Defect 1.00
Mixed-Solvent Crystallization Expands the Chemical Space of 2D Perovskites and Enables Phonon-Limited Exciton Transport 1.00
Molecular Engineering of Terminus, Conjugation, and Energetics for Thermally Stable Inverted Perovskite Solar Cells 1.00
Diastereomeric Fullerene Composite Engineering for Enhanced Perovskite Solar Cells 0.14
Lewis Acid-Catalyzed Condensation for Facile Synthesis of Quinoidal 2-(5-Methylenethiazol-2(5iH/i)-ylidene)malononitrile End-Capped Shortwave Infrared Organic Semiconductors 0.82
Synergistic Engineering of Electronic Structure and Interfacial Field via a 3D Heterostructure for Stable Sodium Metal Batteries 0.91
Molecular Design of Self-Doping Cathode Interlayer for Efficient and Humidity-Resistant Organic Photovoltaic Cells 1.00
Solid-State Packing Controls Exciton Delocalization and Photophysics in Nonfullerene Acceptors 0.25
Nano-Bi@Hard Carbon Composite Anode for Sodium-Ion Batteries with 385 Wh L–1 Volumetric Energy Density and Durability 1.00
Local Cation-Ordered Superlattice Stabilizing Ni-Rich Single-Crystalline Cathodes 0.67
A Quasi-Ordered Mn-Rich Cathode with Highly Reversible Oxygen Anion Redox Chemistry 0.56
Synergistic Electron-Deficient Surface Engineering: A Key Factor in Dictating Electron Carrier Extraction for Perovskite Photovoltaics 0.82
Revealing Performance-Limiting Buried Interfaces in Layered Dion–Jacobson Lead–Iodide Perovskites 0.85
Designing Natural Cell-Inspired Heme-Spurred Membrane Electrode Assembly for Fuel Cells 1.00
Spatial Heterogenous Redox Couples Degradation in Sodium-Ion Battery Cathode Materials and the Mitigation of Voltage Fade by Blocking Oxygen Release 0.75
Achieving High-Performance Defect-Free LiCoO2 Cathode via a Dopant-Free Approach 1.00
Fully Conjugated Thiophene-Fused Oligo-BODIPYs: A Class of Intensely Near-Infrared Absorbing, Arc-Shaped Materials with up to 31 Linearly-Fused Rings 1.00
Unveiling the Solvation Chemistry and Surface Effects on COsub2/sub Reduction Reaction Pathways in Nonaqueous Li–COsub2/sub Batteries 1.00
Structure Flexibility Enabled by Surface High-Concentration Titanium Doping for Durable Lithium-Ion Battery Cathodes 0.17
Nanoscale Origin of the Soft-to-Hard Short-Circuit Transition in Inorganic Solid-State Electrolytes 0.08
Odd–Even Effects of Linear Alkyl-Based Organic Spacers for Efficient Charge Transport in Two-Dimensional Dion–Jacobson Tin Perovskites 0.20
Spiro-Linked Planar Core Small Molecule Hole Transport Materials Enabling High-Performance Inverted Perovskite Solar Cells 1.00
Unraveling Atomic-Level Mechanisms of Structural Transitions in Lithium Cobalt Oxide under High-Voltage Conditions 1.00
1 1.00
A Thieno[3,2-b]indole Platform for Conjugated Polymers via Direct Arylation Self-Polycondensation: Design, Synthesis, and Electrochromic Exploration 1.00
42 40.64
Stabilizing Oxygen Framework in P3-Type Cathodes for Highly Reversible Sodium-Ion Batteries 1.00
A Chemical-Potential-Driven Self-Mitigation Mechanism during Calendar Aging 1.00
Thermal-Induced Reversible Spinel-to-Layered Phase Transition in LiCoO2 Cathodes 1.00
Mixed-Conductive FeS2 Composite Cathode for High Areal Capacity Thin-Film Lithium Batteries 0.89
Interfacial Energy Engineering via Fluorine Doping Suppresses Lithium Self-Permeation in Li3N Solid Electrolytes 1.00
Upcycling Industrial Wastewater to Three-Dimensional Porous Cu4(OH)6FCl Nanosheets as Anode for High-Performance Lithium-Ion Batteries 1.00
Interfacial Engineering of a Bi/SnS Heterojunction with a Built-in Electric Field toward High-Capacity Sodium-Ion Storage 1.00
Simultaneous Solvent and Interface Engineering of Electron Transport Layer for Efficient and Stable Perovskite Solar Cells 1.00
Unlocking Ultralong Cycle Life and Temperature-Tolerable Secondary Batteries Using a Vacancy-Abundant Co9S8@ZnS/Carbon Anode 1.00
Coupling Se-Vacancy-Rich FeSe2/Bi2Se3 Heterojunction and Microhydration-Guided Water-in-Oil Electrolyte for Ultrahigh-Performance Hybrid-Ion Batteries 1.00
In Situ Click Chemistry for Energy-Level-Tunable Mixed Self-Assembled Monolayers in Perovskite Solar Cells 0.90
Surface Antisite Defect-Induced Three-Dimensional Li+ Diffusion Enables Stable and Kinetic-Enhanced LiFe1–xMnxPO4 Cathodes 1.00
Multi-interactions Regulate Perovskite Crystallization and Defect Passivation for Efficient and Stable Perovskite Photovoltaics 1.00
Bond-Defect Synergy Enabled Ultrastable and High-Rate Sodium Iron Phosphate Cathode through Zn/F Co Substitution 1.00
Synergistic Morphology and Electron Modulation Engineering Enables Cation–Anion Cointercalation and Conversion Chemistry 1.00
LiF/LiBO2-Rich Silicon-Based Anode Enabling Stable Operation of Sulfide All-Solid-State Lithium-Ion Batteries without Extra External Pressure 1.00
A Designed High-Entropy Sulfide-Based Nanoporous Heterojunction for Fast, Durable, and High-Capacity Sodium Storage 1.00
Interface-Dipole-Driven Type-II Band Offset Engineering in Perovskite Heterostructures 0.33
Delocalized Electron System Enables Stable NASICON Cathode for Sodium-Ion Batteries 1.00
Suppressing Lattice Oxygen Release and Mitigating Mechanical Stress Buildup in Co-Free LiNiO2 Cathodes 1.00
Bifunctional Ligand Anchoring Modulates Colloidal Nucleation and Intermediate-Phase Crystallization for δ-Phase-Suppressed High-Efficiency Perovskite Solar Cells 1.00
Surface Gradient Engineering Relaxes Stress Concentration in Ultrahigh-Ni Cathodes, Enabling Superior Cyclability in Pouch Cells 1.00
Efficient Rigid and Flexible Perovskite Solar Cells with Uniform Crystallization and Weak Lattice Vibration via Interface Defect Passivation 1.00
Substituent-Tuned Dipole and Coordination Geometry in Methoxybenzohydrazides for Stable and Efficient Inverted Perovskite Solar Cells 1.00
Multisite Anchoring Strategy of Rationally Designed Molecular Passivator for Achieving Efficient and Stable Perovskite Solar Cells 1.00
Atomistic Mechanism of Defect Self-Passivation in Metal Halide Perovskites 0.71
Cooperative Design of Magnesium Ions with Cations or Anions in 2D VS2 Electrodes 1.00
Enhancing Efficiency and Stability of Tin-Based Perovskite Solar Cells through A-Site Compositional Engineering 1.00
Tuning the Sodium Content for Highly Stable O3-Type Sodium Layered Oxides 1.00
Spatial-Confinement-Driven Bubble Self-Management for Compact, High-Performance Water Electrolyzers 1.00
Multifunctional Phenothiazine-Based Self-Assembled Monolayer as a Hole-Selective Contact for Efficient Wide-Band-Gap Perovskite Solar Cells 1.00
Nitrogen-Doped Graphene-Supported Straw-Like CoSe2 for Rapid and Stable Sodium-Ion Storage 1.00
Anchoring Antimony Single Atoms into Carbon Shells via Vacuum Pyrolysis as Advanced Sodium Host 1.00
Boosting the Sodium Storage Performance of O3-Type Layered Oxide Cathode by Dual-Site Doping 1.00
Green Synthesis of Pseudocoherent Fluoride Cathode Materials from Wastes 1.00
Diamane Facilitated the Stability of Sodium Metal Anodes 0.93
Degradation Pathway Tailoring through Nanocrystal Interface Engineering for Photostable Perovskite Solar Cells 1.00
Efficient and Stable Carbon-Based Hole-Transport-Layer-Free CsPbI2Br Solar Cells by Adding Trace Amounts of Yttrium Acetate into the Photoactive Layer 1.00
Grooved Cathode Enabled High Areal Capacity Lithium–Air Batteries 1.00
Low-Dimensional Ligand-Driven Design of 2D/3D Perovskite Heterojunctions: Achieving Mitigated Nonradiative Recombination and Robust Stability for Next-Generation Solar Cells 1.00
Ultrathin Mesoporous Sandwiched Junctions with Monolayered Mesopores for Ultrahigh-Rate Sodium-Ion Storage 1.00
Co(acac)2-Mediated Regulation of Li2O2 Gradient Growth in Lithium–Oxygen Batteries 0.88
11 8.99
Continuously graded-doped SnO2 for efficient n–i–p perovskite solar cells 0.84
Recycling of spin-triplet excitons in organic photovoltaics 1.00
Mechanically driven Li dendrite penetration in garnet solid electrolyte 0.03
Maximizing carrier extraction in hybrid back-contact silicon solar cells 1.00
A ductile solid electrolyte interphase for solid-state batteries 1.00
A matrix-confined molecular layer for perovskite photovoltaic modules 1.00
All-perovskite tandem solar cells with dipolar passivation 0.92
Tin-based perovskite solar cells with a homogeneous buried interface 1.00
Toughened self-assembled monolayers for durable perovskite solar cells 1.00
Efficient perovskite/silicon tandem with asymmetric self-assembly molecule 1.00
Efficient near-infrared harvesting in perovskite–organic tandem solar cells 0.19
1 1.00
Ultrafast charging of two-dimensional polymer cathodes enabled by cross-flow structure design 1.00
1 0.88
Building façade photovoltaics enhance global climate resilience 0.88
112 101.37
Self-assembled 1D/3D heterojunction enables all-inorganic perovskite 4-terminal tandem solar cells with 21.54% certified efficiency 1.00
Uniform and ordered self-assembled hole-selective layers driven by π-π interactions for efficient perovskite-silicon tandem solar cells 1.00
Co-deposited inverted perovskite photovoltaics towards 27% efficiency via vertical redistribution of self-assembled-molecules and in-situ crosslinking 1.00
Molecular confinement for enhanced interfacial contact and performance in inverted perovskite solar cells 0.89
Dimensional control of low-dimensional perovskite hybrids for photovoltaics 0.82
Exploring the feasible net-zero transition pathway in China considering energy system flexibility 1.00
One-pot synthesis of quasi-block fluoropolymers for graded heterojunctions via dual resurfacing 1.00
Regulating interface electric field to stabilize high-voltage KVPOF positive electrode for sustainable potassium-ion batteries 1.00
Homogenizing interfacial assembly via indole-mediated binary monolayers for perovskite solar cells 0.97
Bulk electrical power extraction through tunnel transmission technology from renewable energy concentrated zones 0.86
Phosphorus-activated carboxyl small molecule positive electrode for high specific capacity and long-life iron-organic batteries 1.00
Flash joule heating-induced spinel-phase surface in Ni-rich layered oxide positive electrodes to stabilise lattice oxygen 0.94
Spin-manipulation via novel MoPS nanocrystal for high-performance thick-film organic solar cells 1.00
Solvating magnesium polysulfides enables low–barrier speciation for magnesium sulfur batteries 1.00
High-voltage and stable co-free LiNiO2 positive electrode for sulfide-based all-solid-state batteries 0.17
In-cell bypass diodes for high-efficiency and shading-tolerant back contact silicon photovoltaic modules 1.00
Moisture-responsive crystallization strategy for efficient CsPbI solar cells fabricated under high-humidity conditions 1.00
Rising Air-Conditioning Use Intensifies Global Warming 0.47
Regulating perovskite crystallization kinetics at laser scribe lines for efficient and stable perovskite modules 1.00
High Open-Circuit Voltage–Fill factor product in perovskite solar cells enabled by ferroelectric heterojunction modulation 0.94
Potential-dependent interfacial specific adsorption accelerates charge transfer in sodium-ion batteries 1.00
Scalable solution soaking quenching technique unlocks efficient and durable wide bandgap perovskite solar modules 1.00
Chlorination-controlled aggregation and film-formation kinetics enabling high-efficiency organic solar cells with low-cost linear conjugated polymers 0.89
Interfacial dipole engineering by self-assembled molecules in n-i-p and p-i-n perovskite solar cells 0.25
Bubble dynamics matters at high-rate water electrolysis 1.00
Exploiting a high-performance magnesium-fluoride battery prototype enabled by anion-receptor-mediated electrolyte 1.00
Localized 2D/3D heterojunction enhances photovoltage for perovskite-organic tandem solar cells 1.00
Allylrhodanine-processed all-small-molecule organic solar cell achieves an 18.43% efficiency breakthrough 0.77
Interfacial engineering via dipolar fullerene derivative for efficient tin halide perovskite indoor photovoltaics 0.95
A tin fluoride-free, efficient and durable tin-lead perovskite solar cell 0.86
Decoupling slab gliding and lattice contraction in Na layered oxides to enable high-voltage Na-ion batteries 1.00
A self-assembled molecule directs ordered α-FAPbI for n-i-p perovskite solar cells 1.00
Electronegativity and entropy design of layered oxides for sodium-ion batteries 1.00
Anti-aggregation self-assembled monolayers enable high-performance and scalable perovskite solar cells 0.95
Thermotropic liquid-assisted interface management enables efficient and stable perovskite solar cells and modules 1.00
Visualization and quantification of lattice strain in battery cathode particles through electron backscatter diffraction imaging 1.00
Behavioral uncertainty in EV charging drives heterogeneous grid load variability under climate goals 0.67
Homogeneous crystallization via sustained solvent-extraction channels for methylammonium-free all-perovskite tandem solar cells 1.00
Crystallization modulation for wide-bandgap perovskites with universal defect passivation toward efficient perovskite/organic tandem photovoltaics 1.00
Intrinsic light reflection of conjugated films towards high-performance organic solar cells 1.00
Violet/ultraviolet light-induced depassivation in halide perovskite solar cells 0.92
Cryogenic nanoscale visualization of intrinsic magnesium deposition in magnesium metal batteries 0.33
Photoelectrochemical water splitting cells at elevated pressure using BiVO and platinized III-V semiconductor photoelectrodes 0.20
Sequential Organic Ligand Modifications to Dedicatedly Restructure Grain Boundary and Surface of Perovskites 1.00
Uniform phase distribution of wide bandgap perovskite for high-performance perovskite-silicon tandem solar cells 1.00
Interfacial electrostatic repulsion inhibits iodide ion migration for enhancing reverse-bias stability of perovskite solar cells 1.00
Constructing an anion-capturing interface to achieve Li+ cross-phase transport in composite solid electrolytes 1.00
Tailoring interface-anchoring molecules for efficient and stable perovskite solar cells 1.00
Tailored PEDOT:PSS phase segregation for high-efficiency flexible all-perovskite tandem solar cells and mini-modules 0.19
Scenario-adaptive hierarchical optimisation framework for design in hybrid energy storage systems 0.88
In-situ entropic ligand engineering enables high-efficiency quantum dot solar cells 1.00
Halide insertion regulation for efficient and stable wide-bandgap perovskite photovoltaics 1.00
An ammonia-induced universal synthesis approach for manganese based layered oxides 1.00
Synergistic versatile bistriflimide salts in light-accelerated spiro-OMeTAD oxidation and perovskite module photovoltaics engineering 0.45
Data-driven dynamic modeling for inverter-based resources using neural networks 1.00
Highly oriented semiconducting polymer nanofilm with enhanced crystallinity 1.00
Ionomer distribution control via thiophene S-modification of carbon support for high-power proton exchange membrane fuel cells 1.00
Sonication-induced J-aggregation in nonhalogenated solvents boosts exciton delocalization for high-efficiency organic solar cells 0.79
Design principles of practical industrial-scale layered oxide cathodes with air/water stability for sustainable sodium-ion batteries 1.00
Ambient blade-coated perovskite solar cells with high reverse bias stability enabled by polymeric hole transporter design 1.00
Local electronic regulation of Na5V12O32 cathode suppressing structural distortion toward enhanced sodium storage 1.00
Topotaxially grown composite cathodes for cobalt-free high-energy long-life Li-ion batteries 0.63
Quantifying the electrochemical kinetics of battery positive-electrode crystal facets 0.86
Unlocking vehicle-to-grid potential of load shifting in China’s megacities considering comprehensive real-world behaviors 0.88
Mitigating residual MA for stable FAPbI perovskite photovoltaics 0.95
Moist-electromagnetic coupling enabled by ionic-electronic polymer diodes for wireless energy modulation 0.89
Critical length screening enables 19% efficiency in thick-film organic solar cells 1.00
Mechanically robust halide electrolytes for high-performance all-solid-state batteries 0.95
Entropy-driven strategy stabilizes photoactive halide perovskites for inverted solar cells 1.00
Revealing interfacial failure mechanism of silicon based all solid state batteries via cryogenic electron microscopy 1.00
Interfacial ferroelectricity unlocks stable formamidinium-based perovskites 0.92
Nanoscale soft interaction-engineered perovskite heterojunctions for highly efficient and reproducible solar cells 0.89
Yttrium oxide engineered substrate enables improved durability for perovskite solar cells 0.86
Confining iodide migration with quantified barrier for durable perovskite solar cells 1.00
Decoupling photothermal-mechanical degradation through lattice-stabilizing networks in Sn–Pb perovskites and all-perovskite tandem solar cells 1.00
Organic film evolution and recombination losses in highly efficient perovskite/organic tandem solar cells 1.00
Green encapsulants boost stability and sustainability in inverted perovskite solar cells 1.00
Pyridine-assisted solvent engineering for high-quality narrow-bandgap perovskites in efficient tandem modules 1.00
In-situ boundary bridging unlocks multi-grain-domain carrier diffusion in polycrystalline metal halide perovskites 0.65
Stabilizing dual-phased perovskite towards high performance photovoltaics with enhanced batch stability and consistency 0.93
Minimizing interfacial energy losses via multifunctional cage-like diammonium molecules for efficient perovskite/silicon tandem solar cells 1.00
Enriching conductive capping by alkaline treatment of perovskite quantum dots towards certified 18.3%-efficient solar cells 1.00
Fully chemical interface engineering for statically and dynamically stable perovskite solar cells 0.87
China’s urban EV ultra-fast charging distorts regulated price signals and elevates risk to grid stability 1.00
Stabilizing buried interface by bilateral bond strength equilibrium strategy toward efficient perovskite photovoltaics 1.00
Photo-homogenization assisted segregation easing technique (PHASET) for highly efficient and stable wide-bandgap perovskite solar cells 1.00
Solvent engineering enables tin-lead perovskite films with long carrier diffusion lengths and reduced tin segregation 1.00
Amphoteric coplanar conjugated molecules enabling efficient and stable perovskite/silicon tandem solar cells 1.00
Lattice stabilization and strain homogenization in Sn-Pb bottom subcells enable stable all-perovskite tandems solar cells 1.00
Enhanced stability and efficiency in perovskite solar cells via mixed-metal chalcohalide-alloyed formamidinium lead iodide 0.79
Iceberg-like pyramids in industrially textured silicon enabled 33% efficient perovskite-silicon tandem solar cells 1.00
Grid congestion stymies climate benefit from U.S. vehicle electrification 0.50
An efficient and precise solution-vacuum hybrid batch fabrication of 2D/3D perovskite submodules 1.00
Flexibility meets rigidity: a self-assembled monolayer materials strategy for perovskite solar cells 0.98
Electromagnetic dynamic stability analysis of power electronics-dominated systems using eigenstructure-preserved LTP Theory 0.92
Inhibiting inter-layer gliding in transition metal layered oxides through interphase engineering for sodium-ion batteries 0.89
Twinning mediated intralayer frustration governs structural degradation in layered Li-rich oxide cathode 0.63
Artificial-intelligence-guided design of ordered gas diffusion layers for high-performing fuel cells via Bayesian machine learning 1.00
Enhanced coordination interaction with multi-site binding ligands for efficient and stable perovskite solar cells 1.00
Cross-linked multifunctional bilayer polymer buffer for enhanced efficiency and stability in perovskite solar cells 1.00
Total-area world-record efficiency of 27.03% for 350.0 cm commercial-sized single-junction silicon solar cells 1.00
Low-temperature sequential deposition for efficient inverted perovskite solar cells 1.00
Cascade reactors for long-life solid-state sodium–air batteries 1.00
Layered-columnar cathode materials for sodium-ion batteries 1.00
Fluorine-doped micropore-covered mesoporous carbon nanofibers for long-lasting anode-free sodium metal batteries 1.00
Globally interconnected solar-wind system addresses future electricity demands 0.64
Inductive effects in molecular contacts enable wide-bandgap perovskite cells for efficient perovskite/TOPCon tandems 0.91
Multicationic interactions mitigating lattice strain in sodium layered cathodes 0.72
Engineering twin structures and substitutional dopants in ZnSe0.7Te0.3 anode material for enhanced sodium storage performance 1.00
Economic and environmental competitiveness of multiple hydrogen production pathways in China 1.00
Self-cleaning Spiro-OMeTAD via multimetal doping for perovskite photovoltaics 1.00
Less-acidic boric acid-functionalized self-assembled monolayer for mitigating NiOx corrosion for efficient all-perovskite tandem solar cells 1.00
20 17.40
Quasi-random oriented molecular contacts for inverted perovskite solar cells with improved efficiency 1.00
Controlled Cs⁺ incorporation through organocaesium salts in α-FA–Cs perovskite solar cells with a certified efficiency of 26.61% 1.00
A molecularly engineered electron-selective self-assembled monolayer enhances quasi-Fermi level splitting in inverted perovskite solar cells 1.00
Amorphous self-assembled multilayers for perovskite solar cells with improved reverse bias stability 1.00
Additive-assisted perovskite crystallization on industrial TOPCon silicon for tandem solar cells with improved efficiency 0.26
Bifacial tunnel oxide passivating contacts for silicon and perovskite/silicon tandem solar cells with improved efficiency 0.90
Photoswitchable isomers to improve grain boundary resilience and perovskite solar cells stability under light cycling 0.57
Buried 2D/3D heterojunction in n–i–p perovskite solar cells through solid-state ligand-exchange reaction 0.89
Self-assembled molecules with hydrogen-bond networks enable efficient all-perovskite tandem solar cells 1.00
Molecularly aligned electron channels for ultrafast-charging practical lithium-metal batteries 0.88
Centimetre-scale fullerene-free tin-based perovskite solar cells with a 14.51% certified efficiency 0.95
Solvated-intermediate-driven surface transformation of lead halide perovskites 0.79
Aromatic interaction-driven out-of-plane orientation for inverted perovskite solar cells with improved efficiency 1.00
Two-step crystallization modulated through acenaphthene enabling 21% binary organic solar cells and 83.2% fill factor 1.00
Impact of lithium dopants in hole-transporting layers on perovskite solar cell stability under day–night cycling 1.00
Intralattice-bonded phase-engineered ultrahigh-Ni single-crystalline cathodes suppress strain evolution 0.36
Exceptional layered cathode stability at 4.8 V via supersaturated high-valence cation design 1.00
Inhibiting defect passivation failure in perovskite for perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells with certified efficiency 27.35% 1.00
Fluorinated isopropanol for improved defect passivation and reproducibility in perovskite solar cells 1.00
Redesigning electrification of China’s ammonia and methanol industry to balance decarbonization with power system security 0.79
1 0.67
Increased terrestrial ecosystem carbon storage associated with global utility-scale photovoltaic installation 0.67
8 6.02
Bulk nano-heterointerface secures molecular contacts in perovskite solar cells 0.83
Perovskite–organic tandem solar cells with superior reverse-bias stability 0.95
Crystal-facet-directed all-vacuum-deposited perovskite solar cells 0.23
Intermediate phase evolution for stable and oriented evaporated wide-bandgap perovskite solar cells 0.30
Suppression of PCBM dimer formation in inverted perovskite solar cells 0.83
An amorphous Li–V–O–F cathode with tetrahedral coordination and O–O formal redox at low voltage 1.00
Organic solar cells with 21% efficiency enabled by a hybrid interfacial layer with dual-component synergy 1.00
Engineering bonding sites enables uniform and robust self-assembled monolayer for stable perovskite solar cells 0.89
4 1.90
Chemical hardness engineering synchronizes crystallization in perovskite tandems 0.95
Gas-mediated defect engineering in earth-abundant Mn-rich layered oxides for non-aqueous sodium-based batteries 0.11
Tailoring nanoscale interfaces for perovskite–perovskite–silicon triple-junction solar cells 0.34
Ultrabroadband nonlinear Hall rectifier using SnTe 0.50
12 10.96
Atomically dense SbO interlayer for highly stable perovskite photovoltaic modules 1.00
Narrow-bandgap acceptors with suppressed exciton thermalization loss for highly efficient perovskite–organic tandem solar cells 0.87
Highly stable all-perovskite tandem solar cells with targeted conversion of tin–lead surfaces 0.87
Axially chiral molecular contacts with low isomerization barriers for perovskite solar cells 1.00
Photostable donor–acceptor interface for minimizing energy loss in inverted perovskite solar cells 1.00
Silicon nitride nanocomposites at the buried interface for stable perovskite solar cells 1.00
Spontaneous 2D perovskite formation at the buried interface of perovskite solar cells enhances crystallization uniformity and defect passivation 1.00
In situ dynamic regulation of strain at the buried interface of stable perovskite solar cells 1.00
Stabilizing high-efficiency perovskite solar cells via strategic interfacial contact engineering 0.23
Fully thermally evaporated perovskite solar cells based on reverse layer-by-layer deposition 1.00
High-efficiency perovskite solar cells enabled by suppressing intermolecular aggregation in hole-selective contacts 1.00
Solvent-assisted reaction for spontaneous defect passivation in perovskite solar cells 1.00
3 2.62
Decaphyrin Conformers Stabilized by Pseudo-Rigid Dipyrrolylbenzothiadiazole Blocks: Synthesis, Structures and Interconversion 0.82
Synthesis and Properties of Lactone Embedded Bisanthene 1.00
Loading Thiacorrole with Various Aromatic Rings: Enhanced NIR Absorption and Improved OER Activity 0.80
2 2.00
String-Breaking Mechanism in a Lattice Schwinger Model Simulator 1.00
Real 2D Galvanostatic Model: Encoding Physicochemical Heterogeneity into a Full Battery 1.00
3 1.89
The effect of land costs on the economic and sustainability performance of solar photovoltaics in China 0.39
Measuring the Young’s modulus of individual lithium whiskers 1.00
Risk-aware electricity dispatch with large-scale distributed renewable integration under climate extremes 0.50
7 5.38
Hafnium oxide interface stabilization for efficient, photothermally stable perovskite solar cells 0.96
Multivalent ligands regulate dimensional engineering for inverted perovskite solar modules 0.37
Molecular press annealing enables robust perovskite solar cells 1.00
Optimal perovskite vapor partitioning on textured silicon for high-stability tandem solar cells 0.17
Homogenized chlorine distribution for >27% power conversion efficiency in perovskite solar cells 1.00
Stable and uniform self-assembled organic diradical molecules for perovskite photovoltaics 1.00
Vapor-assisted surface reconstruction enables outdoor-stable perovskite solar modules 0.89
15 12.80
Machine learning–assisted discovery of outside-in structure Ni-rich cathode with high performance 1.00
Enhancing halide ion homogeneity in blade-coated wide-bandgap perovskite for perovskite-organic tandem solar cells 1.00
High-voltage Na3V2(PO4)2F3 cathodes enabled by low-valence metal cations 1.00
Ink-state preaggregation control enables scalable and automated fabrication of highly efficient and stable organic photovoltaics 0.52
Competitive-binding buried interlayer for year-round reproducible perovskite solar cells 1.00
Bifacial carbodithioate-lead chelating for efficient and robust inverted perovskite solar cells 1.00
Stabilized perovskite ink for scalable coating enables high-efficiency perovskite modules 0.75
Intrinsically charge-generating polymers with long-lived free carriers for efficient photon-to-hydrogen conversion 0.31
The role of offshore wind and solar PV resources in global low-carbon transition 0.38
Defect passivation and crystallization modulation in methylammonium-free wide-bandgap perovskites for all-perovskite tandem solar cells 0.95
Imprisoning 2H intermediate phases in blade-coated wide-bandgap perovskites for efficient all-perovskite tandem solar cells 1.00
Reinvented sodium anode by creating a metal-bulk storage matrix with an expanded 3D plating/stripping mechanism 1.00
Efficient perovskite solar modules enabled by a UV-stable and high-conductivity hole transport material 0.89
Molecular polymerization strategy for stable perovskite solar cells with low lead leakage 1.00
Foldable anode-free sodium batteries enabled by N,P-codoped carbon macroporous fibers incorporated with CoP nanoparticles 1.00
26 23.54
Leveraging enhanced photovoltaic-green roofs for carbon mitigation in China 1.00
Smart Buildings as Urban Energy Infrastructure: A Scalable, Privacy-Aware Framework for City-Scale Flexibility and Resilience 0.75
Asymmetric bidirectional interaction of EVCS infrastructure and urban spatial structure within diurnal rhythms 1.00
Forecast transactional synergy in sustainable cities energy community through hydrogen fuel cell diversified utilization with dual green transportation alongside social digital welfare under carbon trade offs 0.75
From Mature to Emerging Cities: Cross-City Transfer of Grid-Level EV Charging Station Prioritization via Domain-Adversarial Neural Networks 1.00
A global insight into integration of metro and electric vehicle charging stations 1.00
Integrating energy hubs into smart cities using a decentralized optimization framework: Advancing the transition to low-carbon urban energy systems 0.75
Deployment of rooftop photovoltaic systems at the urban scale based on multi-objective optimization from the life cycle perspective 1.00
Co-optimization of expansion planning and dual-mode operations for regional integrated energy systems considering resilience enhancement under multiple uncertainties 1.00
Rooftop PV layout generation and optimization model for large-scale building cluster 1.00
Scenario-based capacity optimization of multi-type energy storage in integrated energy systems using a flexible interaction model 1.00
Optimizing the life cycle costs in the dynamic renewal of rural settlements aiming at zero-carbon emissions 1.00
Emission-aware energy management for smart buildings and energy hubs: A pathway to climate-neutral cities 0.60
Assessment and Optimization of Photovoltaic Planning Incorporating Energy, Environmental, and Economic Benefits at Urban Residential Block Scale 1.00
Study of disturbances of human-induced errors on the optimal decisions of smart charging and energy sharing of zero-emission vehicles with quantified traffic congestion impact 1.00
Unveiling City-scale Urban Roadside Charging Piles Capacity: Geospatial Knowledge-Assisted Small Object Detection and SDG 7-Driven Planning 0.88
Towards Carbon-Neutral Energy Systems: A Two-Layer Robust Model for Day-Ahead Scheduling of Emission-Aware Microgrids 0.60
Sustainable urban charging infrastructure: The role of electric bus charging stations in alleviating charging demand and improving charging accessibility 0.81
Enhancing sustainable development in Chinese cities: The impact of artificial intelligence technology and spatio-temporal evolution analysis 1.00
Resource-Sharing Community with Interconnected H-MEMGs and Shared Hydrogen Stations: A Hybrid Game Approach for Electricity-Hydrogen-Carbon Quota Sharing 1.00
A Method for Allocation of Supply-Demand Equilibrium in Urban Electric Vehicles Shared Charging Facilities 1.00
Economic consequences of compound drought-heatwave induced power deficits: evidence from Sichuan's 2022 power crisis 1.00
Breaking barriers, Boosting green: Artificial Intelligence and Green Transformation in Cities 0.40
Multi-objective optimization of urban industrial building rooftop PV-storage systems: Integrating dynamic degradation and lifecycle carbon footprint 1.00
Investment Decision Analysis Approach for Urban V2G Projects Based on Value Network 1.00
A Framework for Analyzing the Spatiotemporal Distribution of Urban Electric Vehicle Charging Load: A Case Study of Shanghai 1.00
48 45.89
A Self-Adaptive Buffer Layer with Photoswitchable Responses for Durable Perovskite Photovoltaics 1.00
Dual-Site Coordination of a Novel Triphenylamine-Based Self-Assembled Monolayer for Efficient and Stable Inverted Perovskite Solar Cells 1.00
Unlocking Reversible Electrochemistry in O2-Mediated Li-CO2 Batteries Using Soluble Mn-Porphyrin Catalyst through Reconceptualization of the CO2 Reduction Mechanism 1.00
Carbazole Core-Based Small Molecule as an Effective 4-tert-Butylpyridine Replacement for Perovskite Solar Cells 1.00
Pyrido-phenazine-Based Multifunctional Interface Molecules: Construction and Mechanism of High-Efficiency and Stable Perovskite Solar Cells 1.00
How Much Mn Is Needed To Inhibit Molecular Oxygen and Improve the Thermal Stability of High-Ni LiNixMn1–xO2 Cathodes? 1.00
Interfacial Engineering of PEDOT:PSS with Weyl Semimetals NbAs and NbP for High-Performance Organic Solar Cells 1.00
Dipole Molecular Bridge Engineering Enables Defect Suppression and Charge Transport Enhancement at the Buried Interface of Perovskite Solar Cells 1.00
Phase-Pure Thiophene-Based Quasi-2D Perovskite Single Crystals via Cosolvent-Controlled Crystallization 1.00
In Situ PrOx Framework Enables Reversible Reaction Pathways in Li–O2 Batteries 1.00
Inhibiting Sn2+ Oxidation with Dual-Functional Guanidines for Robust Tin Perovskite Solar Cells 1.00
Dual-functional Interface Engineering with Picolinamide for Improved MAPbI3–xClx Perovskite Solar Cells 1.00
Achieving Efficient Triple-Cation Perovskite Solar Cells with Fill Factor Exceeding 86% via a Uniform Interface Passivation Strategy 1.00
Enhancing Perovskite Solar Cell Performance via Engineering the Hole Transport Interface with Star-Shaped Nitrogen-Rich Material 1.00
Effect of Thermal Stress on the Ion Density and Mobility Distribution in Perovskite Solar Cells 0.43
Ultrafast Carrier Dynamics of Nonfullerene Acceptors with Different Exciton–Phonon Coupling: Impact of Intramolecular Noncovalent Interactions 1.00
Co-passivation of Buried Interfaces in Perovskite Solar Cells with Sulfonate and Amine Salts 0.38
Polycarbazole-SAM Hybrid Interface Engineering for Efficient Hole Extraction in Perovskite Photovoltaic Devices 1.00
Transverse Acoustic Modes of Coherent Molecular Motions in Tetracene Crystals 1.00
Dual-Fe-Atom Doped Graphene D2-Fe2C12: An Ultrahigh Theoretical Capacity Anode for Li/Na/K-Ion Batteries 1.00
Identifying the Cascade Carrier Transfer Processes in Quasi-2D Perovskite Films 1.00
Precision Grain-Boundary Filling with Ionic Liquids for High-Performance Inverted Perovskite Solar Cells 1.00
Modulating Crystallization Dynamics and Disentangling Degradation Pathways in Pure-Iodide Wide-Bandgap Perovskite Solar Cells 1.00
Vacuum-Assisted Crystallization for Highly Efficient and Thermally Stable FA-Based Sn–Pb Perovskite Solar Cells 1.00
Mitigating Ion Migration in a Mixed-Halide Perovskite via Laser Shock Annealing 1.00
Regulated Aggregation of Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Electron-Transporting Layer via Solvent Engineering for Performance Improvement in Perovskite Solar Cells 1.00
Benzamidine Derivative as a Multifunctional Additive in Pb–Sn Perovskite Solar Cells 1.00
Doping and Polar Interface-Induced High-Position Sensing in the PEDOT:PSS/Si Heterojunction and Its Multifunctional Optical Imaging 1.00
Free-Standing Soft Carbon Fibers with High Orientation for Na+ Storage to Achieve High Volumetric Capacity 0.92
Synergistic Dual-Anchor Passivation at Buried Interfaces Enabling High-Efficiency and Stable Perovskite Solar Cells 1.00
Magnesiophilic Black Phosphorus Interphase Enabling Planar Electrodeposition and High-Rate Long-Cycling Magnesium Metal Anodes 0.68
Trace Water in Solvent Precisely Influences the Formation Process of the Active Layer for Organic Solar Cells 1.00
Stabilizing Lattice Oxygen in Li-Rich Layered Cathodes by Boron-Doping Induced Anchoring Effect 0.57
Regulation of Oxygen Redox in Disordered Rock-Salt LiXO2 Li-Ion Cathodes by Cation Effects: A First-Principles Study 1.00
Accurate Performance Assessment of Lithium–Oxygen Batteries by Obtaining the Globally Stable Structures of Reaction Intermediates 1.00
Multifunctional Pentafluorobenzoic Acid Boosts the Efficiency and Stability for Tin Halide Perovskite Solar Cells 1.00
Synergistic Regulation of Perovskite Crystallization and Defect Passivation via l-Ascorbic Acid Sodium Salt for High Performance FAPbI3 Perovskite Solar Cells 1.00
Balancing Disparate Crystallization Kinetics in Sn–Pb Perovskites Using a Sulfaguanidine Additive for High-Performance Solar Cells 1.00
Preconditioned Current to Activate Reaction Sites for Uniform Stripping/Plating toward Long-Life Magnesium Metal Anodes 1.00
Air-Doctor-Blading CH3NH3PbI3 Perovskite Solar Cells via a Green Cosolvent Strategy 1.00
Highly Efficient Luminescent Solar Concentrators Based on Composition-Tunable ZnCuInSe/ZnSe Quantum Dots 1.00
Overcoming the Cathode-Derived Li2CO3 Product by Incorporation of CO2 Capture to Boost Li-CO2 Battery Performance 1.00
Enhanced-Efficiency Flexible Perovskite Solar Cells with Surface Reconstruction and Defect Passivation Induced via High-Temperature Post-Treatment 1.00
Aminosulfonate-Modified Buried Interface Coordination-Induced Defect Dassivation and Strain Relief toward Efficient Perovskite Solar Cells 0.97
Dual-Interface Passivation of Wide-Bandgap Perovskite Films for Efficient Four-Terminal Perovskite–Organic Tandem Solar Cells 1.00
Interface Field Engineering of Weakly Alkaline-Treated PEDOT:PSS for Enhanced Performance and Stability of Tin-Based Perovskite Solar Cells 1.00
Synergistic Surface Reconstruction and Defect Passivation via Guanidine Sulfonate for High-Efficiency Perovskite Photovoltaics 0.95
Multifunctional BODIPY-Structured n-Type Conjugated Polymer for Simultaneous Interface Energetic Modification and Defect Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells 1.00
1 1.00
Improving Multi-Scale Short-Term Precipitation Forecasting through Frequency Domain Analysis and Attention Mechanisms 1.00
1 1.00
The impact of artificial intelligence on the energy transition: evidence from Chinese cities 1.00

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.