Manufacturing Engineering articles for China

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 183

Article ‘Count’ for Manufacturing Engineering.

Journal Count Share
6 5.49
Flexible and Fully Printed Artificial Synaptic Devices Based on h-BN-Gated Tellurene Memtransistor 1.00
A Random–Aligned Carbon Nanofiber Interface Enhancing the Intrinsic Electric Field for High-Performance Lithium Metal Batteries 1.00
Nanoprinting with Crystal Engineering for Perovskite Lasers 0.56
4D Printing of Silica Glass Microstructures Based on Capillary-Force-Assisted Assembly 0.92
Ultralow Shrinkage 3D Transparent Nanoporous Glass Printing through Low-Temperature Sintering for Micro-Optical Applications 1.00
3D Nanoprinting of Multifunctional MgO Transparent Ceramics 1.00
18 16.96
Lithium-Conductive In Situ Polymeric Additive to Boost Thick Cathodes Via Dry-Film Technology for High-Energy-Density Li-Ion Batteries 1.00
Bioinspired Directionally Porous Alumina Ceramics With High Reflectivity and Strength for Extreme Laser Protection 1.00
Ceramic Particle‐Reinforced Medium‐Entropy Alloys With Outstanding Mechanical Properties Prepared by Novel Micro‐LPBF 1.00
3D Data Encryption and Random-Featured Anti‑Counterfeiting Enabled by Single-Step Grayscale Lithographic Quantum-Dot Patterns 1.00
Bark‐Fissure‐Inspired Lattice Metamaterials for Concurrent Enhancement of Mechanical and Mass Transport Properties 0.69
Fluorine-Rich Poly(aryl ether) Photosensitive Resins Enable Thermal- and Moisture-Resilient 3D Conformal Electronics With a High-Frequency Antenna Demonstration 1.00
Multifunctional Polyethylene Fiber Materials with Passive Radiative Cooling and Photocatalytic Antibacterial Properties 1.00
Facile Amine Modification Synthesis of Core–Shell Polychloromethylstyrene@Ni Microspheres for Anisotropic Conductive Films 1.00
Near‐Theoretical Oxidation Resistance in Copper Powder Enabled by Scalable Plasma‐Assisted Few‐Layer Graphene Encapsulation 1.00
Spatiotemporal Plasma–Mediated Laser Fabrication of Ultrahigh‐Aspect‐Ratio Nanochannel Arrays for Vertical Perovskite Nanowire Semiconductor Devices 0.75
Post‐Baking‐Induced Self‐Locking Interpenetrating Networks Strengthen 3D‐Printed Polyimide Architectures With Enhanced Thermal and Mechanical Properties 1.00
Single-Precursor Laser-Written Heterogeneous Oxide Array for Olfactory Sensing 1.00
Bioinspired‐Algorithmic Synergistic Sensing System toward Broadband Vibration Perception and Compound Fault Diagnosis for Rotating Machinery 1.00
Triboelectric Sensing Enables Tactile Perception and Material-Adaptive Intelligent Roughness Detection for CNC Machine Tools 1.00
Graded Dielectric Metamaterial with Designable Permittivity Fabricated by 3D Printing 1.00
Rapid Diagnostics of Reconfigurable Intelligent Surfaces Using Space‐Time‐Coding Modulation 0.63
Multifunctional Copolymer Dispersants in High Solid Content Cathode Slurries: From Viscosity Reduction to Interfacial Stabilization and Improved Lithium Transport 0.90
Shear‐Free Static Micro‐Inclined Film Formation (SMICFF): Gravity and Marangoni‐Driven Fabrication of High‐Performance Organic Semiconductors 1.00
15 14.26
Monolithic and Heterogeneous Integration of Organic Semiconductor Crystal Arrays by Meniscus-Manipulated Direct Writing 1.00
Microphase-Separated Elastomers Enable Synergistic Dispersion and Coalescence Control in Conductive Pastes for Fine Printing 1.00
Dynamic Magnetic Alignment Boosts Remanence and Fabrication Reliability in DLP Manufacturing of Magnetic Functional Materials 1.00
Tuning Solution-State Aggregation for Shearing-Induced Alignment and High Mobility Transport in Conjugated Polymers 1.00
Amorphous Engineering of Transparent High-Crystallinity Luminescent Nano-Glass-Ceramics for Advanced Photonic Applications 1.00
3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer 1.00
Rapid High‐Resolution Visible‐Light 3D Printing of Hydrogels via Nanocluster‐Triggered Dual‐Pathway Photoinitiation 1.00
Prediction and Reinforcement of Fracture‐Prone Regions in Disordered Mechanical Metamaterials 1.00
Liquid Jet-Based Triboelectric Nanogenerator 1.00
Surface Energy-Confined Multi-Layer Inkjet Printing for Customizable Optical Microstructures 0.77
3D‐Printing of Ultratough and Healable Elastomers 1.00
3D Printing of Ultrahigh Filler Content Composites Enabled by Granular Hydrogels 1.00
Chemical Exchange Between Silica Networks and Liquid Metals for All-Inorganic, Sintering-Free and Highly Conductive Inks 1.00
Exceptional Thermal Conductivity in Printed Dielectrics through Compositional and Microstructural Design 0.57
Revealing the Degradation Mechanism of Lithium‐Ion Batteries for Electric Aircraft 0.92
1 1.00
Unveiling Radical-Based Reactions in Photochemical Vapor Generation via Online and In Situ Electron Paramagnetic Resonance Monitoring 1.00
4 2.61
Open‐Air, Ultrafast Photoiniferter Polymerization Enables 3D Printing with Low‐Viscosity Resins 0.67
Laser‐Induced Size‐Focusing Synthesis of High‐Quality Colloidal Quantum Dots 1.00
Self-Catalyzed Exothermic Binder Enables Ultrafast Processing and Migration-Resistant Binder Networks for High-Performance Lithium Battery Cathodes 0.11
Surface Reforming of Hard Carbon During Battery Rest for Enhanced Sodium Storage 0.83
2 2.00
A novel physical information-guided predictive maintenance method for chillers 1.00
Non-contact intelligent diagnosis method for key components in energy equipment based on acoustic signal and deep learning 1.00
27 25.98
Transition from one-step to stepwise propagation of a positive streamer with varying pulse durations in an argon plasma jet 1.00
Significant recrystallization suppression in a nickel-based single crystal superalloy during solution treatment via alternating magnetic field 1.00
Tuning atomic structure of single-crystalline diamond surfaces by femtosecond laser for enhanced heat transfer 1.00
Multiple discharge dynamics of long-distance transferred atmospheric pressure plasma jets with floating electrode 1.00
Generation of a large-diameter diffuse plume in an atmospheric pressure argon plasma jet with a single tube 1.00
Breakdown voltage fluctuation and channel shift under high-repetition-frequency pulses in a gas gap 1.00
Insight into discharge mode transition in spatially confined pulsed bubbles-plasma system 1.00
Investigation of surface charging characteristics of ion-irradiated alumina ceramics: Transition from secondary electron emission to charge injection 0.89
Penetration of an atmospheric pressure plasma jet into a micro-channel: Forward ionization wave and restrike 1.00
Stabilization of elastoviscoplastic flow via gas-assisted interfacial slip 1.00
Spatially resolved collision network in glow discharge via voltage–space–energy mapping 1.00
Liquid collector-assisted electrohydrodynamic printing of unrestricted-height architectures 1.00
Generation and mechanism of a two-dimensional large-scale diffuse plume in an open air argon jet 1.00
Development of a high-efficient and uniform microwave-induced atmospheric pressure linear plasma jet source based on a square coaxial structure 0.86
Discharge similarity in capacitive radio frequency carbon tetrafluoride plasmas 0.60
Pre-ionization hydrodynamic cavitation discharge for enhanced plasma activated water 1.00
Synergistic enhanced oxygen pulsed discharge by surface micro-groove structures at atmospheric pressure 1.00
Generation of a large-scale homogeneous DBD using polyethylene terephthalate as dielectric material in open air 1.00
Investigation of noninvasive deep-tissue pathogen inactivation using microwave room-temperature atmospheric pressure plasma jet 0.80
Real-time control of plasma dose delivery in plasma medicine using deep reinforcement learning 0.83
Pre-loaded H2O2 breaks the low-pH dependency of plasma-activated water for bacteria inactivation via catalase suppression and oxidative attack 1.00
Direct laser transfer and thermocompression bonding process of blue GaN micro-LED arrays 1.00
Intense light emission from discharge plasma coupled with metal oxides particles 1.00
Cassie-to-Wenzel transition of liquid metal on laser-structured substrates via water evaporation for reducing thermal contact resistance 1.00
Discharge dynamics of ionization wave manipulated by electrical potential amplitudes in atmospheric pressure plasma jet 1.00
Perpendicularly magnetized synthetic antiferromagnetic MnxGa/Co2FeAl bilayers on MgAl2O4 substrate 1.00
Atmospheric pressure plasma penetrating into multilayer fiber membrane 1.00
7 7.00
A conductive-robust ternary binder for high-loading LiFePO4 cathodes 1.00
Laser writing of a TiVC film for high rate supercapacitors with ultrahigh capacitance 1.00
Fabrication of a nanowire array surrounded by hexagonally ordered cylindrical walls and structure-enhanced SERS performance 1.00
Controllable laser-processing–mediated tuning of micro-protrusion arrays on current collectors for high-performance batteries 1.00
In situ formation of zincophilic–hydrophobic layers using self-assembling additives for stabilizing zinc metal anodes 1.00
Multi-scale material synthesis via ultrafast thermal radiative vapor deposition 1.00
Rapid degradation of microplastics by catalyst-free gliding arc plasmatron 1.00
22 20.97
Consensus Adversarial Feature Gating: A Generalization Enhancing and Mechanism Interpretable Framework for Fault Diagnosis in Nuclear Power Plants 1.00
Research on circulating current between stator windings in hydrogenerator with field winding inter-turn short circuit 1.00
Mechanistic Insights into the Impact of Electrode Areal Density on Electrochemical and Thermal Behavior of High-Rate Lithium-Ion Batteries 0.69
Multi-Objective Topology Optimization of Lithium-ion Battery Pack Cooling Plate in Full-scale Electric Vehicles 1.00
Sound-based wind turbine condition monitoring based on a periodicity enhancement spectrogram and time-varying filtering 0.43
Real-time acquisition, pre-processing and mining of energy consumption data for forging workshop based on data-driven and IOT 1.00
Effect of variable cross-section liquid cooling pipes on thermal management performance enhancement of lithium-ion batteries 1.00
Dynamic energy flow modelling based on time controlled- Markov Chain and whale optimization algorithm-optimized generalized regression neural network for grinding 1.00
Optimization and assessment of membrane-type floating photovoltaic (FPV) systems 1.00
Experimental study on high-frequency nSDBD assist ignition of ammonia/air mixture 1.00
Thermal energy efficiency evaluation of cutting space for dry cutting machine tools: An exergy time-varying graphical method 1.00
Intelligent fault diagnosis for a wind turbine gearbox via multisensor information fusion with adaptive weights 1.00
Experimental study on dynamic process and flow rate of liquid CO2 discharge under gas pressurization 1.00
Optimization of structure-material-gap for soft gaskets used in a refrigerator-freezer 1.00
Mechanical performance analysis of the lightweight semi-flexible photovoltaic module 1.00
Energy deposition characteristics of the plasma channel in a liquid-phase discharge 1.00
Gliding arc plasma excitation on the atomization performance of pre-combustion injector in multi-swirl combustor 1.00
Experimental Feasibility Study on the Application of High-Temperature Heat Pipes in the Cooling Process of Graphitization Furnaces 1.00
Mechanism of a high performance and energy efficiency parallel ultrasonic vibration-assisted cutting 0.86
Nuclear power systems unsupervised anomaly localization considering spatiotemporal information and influence mechanism between devices 1.00
Time series modeling and forecasting with feature decomposition and interaction for prognostics and health management in nuclear power plant 1.00
LBM simulation of multiphysics-chemical coupling for photocatalytic removal of atmospheric methane using cylindrical and elliptical posts 1.00
2 1.05
Integrated one-step dry process enabling prelithiated thick electrodes without primer coating for high energy density and initial coulombic efficiency 0.05
Blade printing of low-melting-point alloys as back electrodes for high-efficiency and stable inverted perovskite solar cells 1.00
1 1.00
Deep learning-based screening approach for priority pollutants: a case study on retired power battery recycling 1.00
3 3.00
Evaluating carbon efficiency across the lithium-ion battery industry using a SMOTE-augmented Super-SBM approach 1.00
Degradation of organic contaminants by non-thermal plasma: Unraveling the pH-dependent mechanism based on experiment, density functional theory analysis and machine learning 1.00
Research on the Synergistic Catalytic Conversion of CO2 and Its Mechanism in a Novel Gliding Arc Plasma Fluidized Bed 1.00
2 1.91
Enhanced Kinematic Calibration of a 4PPa-2PaR Parallel Manipulator with Subchains 0.91
Sensor-Free Self-Calibration for Collaborative Robots Using Tri-Sphere End-Effector Toward High Orientation Accuracy 1.00
3 2.40
Synergistic Enhancement of CO2 Conversion via Surface Microenvironment Engineering in a Nonthermal Plasma 1.00
Near-Infrared Photothermal Metal–Organic Framework for Ultralow-Power-Density Laser Ablation and Direct Patterning 0.90
Air-Sinterable Copper Precursor Inks via Mixed Bidentate/Tridentate Ligands: Synergistic Oxidation Resistance and High Conductivity 0.50
19 18.83
Thermal and mechanical properties of 3D printed lightweight hollow glass microsphere aggregate concrete 1.00
Time–frequency collaborative multi-scale neural network for PEMFC performance degradation prediction and interval estimation under dynamic operating conditions 1.00
Characteristics of n-heptane conversion by microwave liquid plasma for C2 hydrocarbons production:Effect of reactant volume and pressure 1.00
Mapping carbon flows and future trajectories in China's textile sector 1.00
Machine learning-optimized efficient CO2-to-CO conversion in a novel catalyst-free spark discharge plasma 1.00
Thermal and mechanical performance of 3D-printed excavated soil wall solidified by alkali-activated slag 1.00
Toward clean production of power batteries: An electrode burr detection method fusing line laser scanning and enhanced PointNet++ 1.00
A comprehensive analysis framework integrating energy utilization evaluation, diagnosis, and improvement: a case of iron and steel industry 1.00
Exploration of superoleophobic multi-bionic microstructures on cemented carbide surface for high-efficiency reduction of workpiece removal energy in turning 1.00
Multidimensional evaluation of stepped hole EDM drilling in Cf/UHTCs components: Efficiency, performance, economic, and carbon emission 1.00
Carbon footprint analysis for the silk reeling process of raw silk in China: Influence of energy type and geographical position on sustainability production 1.00
Multi-objective interpretation machine learning framework for Synergistically optimizing energy consumption and surface quality in electrolytic copper foil production 1.00
Dyeing and life cycle assessment of Porel modified polyester 1.00
Experimental investigation of tribological behavior of textured pads and their potential application in flexible ball-end tool polishing 1.00
Direct collection and reuse of dispersed aluminum chips through salt flux and supergravity enrichment: less salt consumption and circular economy 1.00
Rapid life cycle assessment for metal additive manufactured product: a multi-feature based predictive approach 0.83
A clean and carbon-reducing pre-granulation process for enhanced muddy iron concentrate and dust sintering: Parameters optimization and deep mechanism analysis 1.00
Hydrogen plasma deoxygenation for titanium recycling: Synergistic ionization–temperature regulation by arc power 1.00
A carbon emission modeling and low carbon optimization method for machining based on power data state identification 1.00
2 2.00
A Full-Process Perspective of Hierarchical Structure Development for Injection-Molded Isotactic Polypropylene with β-Nucleating Agent 1.00
Sustainable, Processable, and Oil-Resistant Biodegradable Thermoplastic Elastomer via Dynamic Vulcanization 1.00
5 4.57
High-Resolution Photopatterning of Surface-Energy-Tunable Fluorinated Polymers as Versatile Templates for Solution-Processed Organic Electronics 0.90
Self-Supporting Porous Silver Microspheres with Large Deformability for Low-Resistance Interconnection in Flexible Electronics 1.00
Exceptional Strengthening via Nanostructure Engineering in Additively Manufactured Aluminum Alloys 0.67
3D Printing of Silver/Conductive Polymer Composites in Silica Gel Glass 1.00
Large-Scale Fabrication of 5 nm Plasmonic Hybrid Nanoslit Arrays 1.00
1 1.00
Sub-second volumetric 3D printing by synthesis of holographic light fields 1.00
30 24.80
Strong 3D-printed aluminium reinforced with ductile-transformable eutectic nano-skeleton 0.88
Intrinsic edge dislocations promote high-temperature strength and ductility in additively manufactured refractory high-entropy alloys 0.94
Strong yet ductile heat-resistant aluminum alloy by additive manufacturing 0.90
Machine learning driven discovery of low modulus biomedical titanium alloys for additive manufacturing 0.37
Intrinsic attraction driving the high temperature performance of additively manufactured aluminum alloys 1.00
4D injection molding 1.00
Programmable multiscale energy release in synergistic energetic composites with three dimensional printed architectures 1.00
Additive manufacturing of cellulose-based photopolymerizable resin with high strength and shape-memory 1.00
Nanoporosity-driven deformation of additively manufactured nano-architected metals 0.25
Laser-stimulated 4D printing of magnetostrictive Fe-Co-V 1.00
Curvature programmed inkjet printing enables adaptive deposition for Gaussian sintering lasers 1.00
De-coherent parallel laser processing of ultradense nanopores for high-density, large-area 3D optical phase encoding 1.00
3D Printing of glasses with tunable UV–VIS–IR photoluminescence via low-temperature nanoscale engineering 1.00
Data-driven inverse design of multifunctional bicontinuous multiscale structures 1.00
Harnessing strengthening-metastability synergy for extreme work hardening in additively manufactured titanium alloys 1.00
In-situ nano-reprecipitation enables superior cryogenic mechanical properties in a 3D printable medium-entropy alloy 0.71
Evaporation-driven generic, high-throughput and roll-to-roll printing of nanomaterials 1.00
Thermodynamic framework for assessing dissolutive wetting behaviors in metallic systems 0.27
Picosecond-scale heterogeneous melting of metals at extreme non-equilibrium states 1.00
High-temperature strength in an additively manufactured Al-based superalloy with stable nanoscale eutectic cellular networks 0.85
Achieving high strain hardening and strength in an additively manufactured titanium alloy 0.12
Trigonometric gradient microstructures in additively manufactured single crystals enable strength-ductility synergy and programmable performance 0.20
High-throughput printing of functionally gradient material from self-propagation 1.00
Ligand-exchange-assisted printing of colloidal nanocrystals to enable all-printed sub-micron optoelectronics 0.71
A general finite-gel strategy for highly concentrated liquid metal inks 1.00
A salt-free medium facilitating electrode prelithiation towards fast-charging and high-energy lithium-ion batteries 1.00
Air-stable Li5FeO4 additive enabled by carbon coating for energy-dense lithium-ion batteries 1.00
Non-contact ultrasound to assist laser additive manufacturing 0.62
Cascade upconversion: a strategy enabling four-photon lithography in weak light intensity 1.00
Directly printed standing ceramic circuit boards for rapid prototyping of miniaturization and high-power of electronics 1.00
1 1.00
Plasmonic printing of high-performance metal oxide electronics under room temperature 1.00
2 1.50
Size-Dependent Phase Selection during Thermomechanical Nanomolding 0.62
Formation of Voids or Stacking-Fault Tetrahedra Induced by Local Chemical Variations in Face-Centered-Cubic Complex Concentrated Alloys 0.89
1 1.00
Supersaturation-engineered wafer-scale growth of anisotropic 2D organic crystals for uniform polarimetric sensing 1.00
5 3.61
Programmable digital printing of organic single crystals for integrated electronics 0.95
Digital composites with reprogrammable phase architectures 0.33
Naturally high fatigue performance of a 3D printing titanium alloy across all stress ratios 1.00
Photonic microspheres for high-capacity DNA data storage: Robust, straightforward, and scalable random access via nonfading indexes 1.00
Nanoscale 3D printing of glass photonic crystals with near-unity reflectance in the visible spectrum 0.32
3 3.00
Laser Ultrafast In Situ-Integrated COF Crystals 1.00
Defect Engineering in CdS: Resolving p-Type Doping Controversies and Enabling Breakthrough n-Type Conductivity for Thin-Film Photovoltaics 1.00
Monitoring Chemical Reactions Induced by Filamentation with Air-Lasing-Based Coherent Raman Spectroscopy 1.00
1 1.00
Spatially-confined bubble plasma oxidation induced by microchannel discharge to boost energy efficiency in water treatment 1.00

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.