Aerospace Engineering articles

Time frame: 1 May 2025 - 30 April 2026

View topic

Count: 203

Article ‘Count’ for Aerospace Engineering.

Journal Count
1
The internal composite design of autorotating plant wings
4
Bio‐Inspired Multimodal Hardware Front‐End Enabled by 2D Floating‐Gate Memory for UAV Perception
Embodied Flight Perception via Forewing‐Hindwing Integration in Lepidopteran‐Inspired Aerial Robotics
Multiband Switchable Microwave Absorbing Metamaterials Based on Reconfigurable Kirigami–Origami
Low‐Dielectric and Submicron‐Resolution Photosensitive Polyimide Substrate for Large‐Scale Pattern Customization and Low‐Signal‐Loss Transmission with Nanotesla‐Scale Quantum Sensing Potential
2
Ultralight and Ablation‐Resistant Shape‐Memory Ceramizable Polymer Aerogel for Self‐Adaptive Thermal Protection
How Does a Delicate Insect Wing Resist Damage? Chitin Orientation Is Adapted to the Mechanical Demands at the Nanoscale
1
Correlation between Thermodynamics and Collision Cross Sections in Ion–Modifier Clustering: Experimental and Theoretical Insights into Nitroaromatic Isomer Separation by Corona Discharge Drift Tube Ion Mobility Spectrometry
11
A reduced-order model for predicting transient performance of air-source heat pumps
Flying electric: A comparative analysis of spare part demands and material cost for all-electric, hybrid-electric, and conventional aircraft propulsion systems
Robust subspace tracking in intelligent fault diagnosis of digital twin gas turbines base on the adaptive Markov transfer
Comprehensive review of gas turbine fault diagnostic strategies
A simulation-based mission optimization approach for regional transport hybrid-electric aircraft
A generic life cycle assessment tool for overall aircraft design
Wind turbine control co-design using dynamic system derivative function surrogate model (DFSM) based on OpenFAST linearization
A review on pyrolysis and coking of liquid hydrocarbons in heated pipe
Liquid hydrogen storage, thermal management, and transfer-control system for integrated zero emission aviation (IZEA)
Thermodynamic performance and decoupling characteristics analysis of a dual-shaft hybrid propulsion system integrated solid oxide fuel cell for commercial aircraft
An efficient energy management strategy of a hybrid electric unmanned aerial vehicle considering turboshaft engine speed regulation: A deep reinforcement learning approach
3
Three-dimensional inhomogeneous characteristics of low-frequency plasma oscillations in wall-less Hall thrusters
Identification and suppression of compressional Alfvén wave instability in magnetic-nozzle plasma thrusters
Defining aerodynamic modes of large-scale birds' covert feathers
117
Performance prediction and power regulation of organic Rankine cycle turbine with deep learning
Asymmetric Leading-Edge Design Mechanisms and Multi-Agent Reinforcement Learning Optimization for Wide-Incidence Turbine Blades
An economic power regulation strategy for dual-spool turboshaft power unit based on power flow splitting, shaft speed, and variable power turbine guide vanes
Performance improvement for Bach-type vertical-axis wind turbines in dynamic highway airflow environments
Optimized split-flow deflector design for airflow drying systems using BP neural network coupled with NSGA-II algorithm
A causality-guided and interpretable sweep–lean optimization framework of axial fan blades for aerodynamic enhancement
A rapid and cost-effective optimization framework for supercritical CO2 centrifugal compressor blades using a hybrid prediction-CFD approach
Investigation of the Aerodynamic Characteristics in Twin-rotor Carousel Wind Turbines
Flight time and seat capacity as key predictors: A novel approach to early-phase aviation CO2 emission estimation
Energy-efficiency optimization and internal flow characteristics with a variable outlet width strategy in large-scale centrifugal impeller system
A Multi-Source-Information-Constrained Method for Identifying Component Performance Dispersion in Mass-Produced Aero-Engines
Modeling and experimental validation of self-sensing high-frequency displacement of multi-dimensional discrete magnetostrictive actuator
Investigation of a composite flow control technique for vertical axis wind turbine: a slotted blade integrated with the active flap control
Aerodynamic Enhancement and Noise Reduction of a Composite Bio-inspired Airfoil Based on Mode Decomposition Methods
Numerical Investigation on Transient Aero-Thermal-Structural Coupling Characteristics of Curved Double-Wall Structures During Engine Rapid Load-Varying Process
Trade-off between propulsive performance and structural integrity in a Scramjet under fluid-thermal-structural interaction
Comparative Study on the Influence of Inlet Configurations on Compressor Performance in Compressed Air Energy Storage Systems
The aero-thermodynamic design of supercritical CO2 radial turbine based on the particle swarm optimization and vortex competitive mechanism
Hybrid symbolic regression framework for digital twin modeling of gas internal combustion engines
System-level modelling and optimisation of a recuperated micro gas turbine hybrid power system for eVTOL endurance enhancement
Performance Analysis and Multi-objective Optimization of a Reheat-Regenerative Closed Brayton Cycle for Aircraft-Engine Waste Heat Recovery
Time-resolved CFD analysis of torque generation in an L-shaped vertical-axis wind turbine
A Pressure-Based Actuator Line Approach for Diffuser Modeling in High-Fidelity CFD of Diffuser-Augmented Wind Turbines
Effects of backward-facing step depths and inner/outer-wall injection schemes on rotating detonation wave under high flight Mach number conditions
A Digital Twin Framework for Air-breathing Precooled Engine Experimental System
Research on Gas Turbine Engine Air mass flow Onboard Estimation: A Lightweight Compression Framework with Model-Experiment Synergy
Efficient Turbine Placement Optimization in Large-Scale Offshore Wind Farms: A Space-Constrained Deep Reinforcement Learning Algorithm
Multi-fidelity optimization of tidal turbine blades using calibration and hierarchical kriging
Off-design performance analysis of a supercritical carbon dioxide Brayton cycle coupled with a scramjet based on deep learning method
Feasibility analysis of a supersonic aeroengine with electric power transmission
Variable Geometry Turbine Leakage Loss Model Modification
Aerodynamic performance characterization and dynamic stall control of the wavy leading-edge blades of a vertical-axis wind turbine under zero-net-mass-flux jet*
Performance evaluation and comparative analysis of a novel aviation SOFC-Turboprop hybrid system utilizing chemical recuperation for hydrogen production
RoDaVi – a mixed drag-lift wind turbine: experimental investigation on performances and flows
A refined mass diffusion coefficient method for deep pyrolysis of RP-3 under supercritical pressure
Performance enhancement of twin-rotor horizontal axis wind turbines by duct: A study using BEM and actuator disk theory
Numerical modeling and experimental analysis of air ejectors’ transient operation in bleed-air aircraft systems
Integrating aerodynamic loss into film cooling performance evaluation from a thermodynamic cycle perspective: a case study in compound angle design
Gas turbine gas path fault diagnosis based on open-set recognition and physics-data fusion
Energy conversion loss mechanisms in a mixed-flow pump-as-turbine influenced by guide vane shedding vortices
Performance analysis of a novel system coupled steam reforming and solid oxide fuel cells with anode exhaust recirculation for power supply and thermal management of hypersonic vehicles
Energy management strategy for parallel hybrid electric aircraft considering SOC sustainment
A novel hydrogen-fueled turbine engine architecture combined with power generation fuel thermal management system
Aerothermal Performance Optimization of Uncooled Asymmetric Cavity Bottom Blade Squealer Tip with Generative Adversarial Network-based Surrogate Model
Improved Model for Hydrogen Fuel Cell System Design and Its Integration in Sizing for Hybrid-Electric-Propulsion Aircraft
Data-driven aerodynamic optimization for enhancing unsteady performance in wind energy systems
Mechanical energy loss and design criteria of the intakes under wide design space considering vibrational non-equilibrium effect
Study on combustion characteristics of hydrogen fuel jet based on strut in transonic flow field
The impact of jet orifice configurations on atomization in gas-liquid orifice type pintle injectors
A weight fraction-based analytical method for initial sizing of hybrid power plant systems in electric vertical take-off and landing aircraft
Analysis of overall performance and matching mechanism of a novel hydrogen mixed-flow turbofan hybrid electric propulsion system
A novel energy conservation method for wind-assisted propulsion ships based on sails thrust optimization
Performance study of a hybrid aircraft propulsion system integrating a high-temperature proton exchange membrane fuel cell
Performances of nano-Pt/Ceria catalysts in steam reforming, thermal cracking, and combustion of novel emulsified hydrocarbon fuels
Thermal protection and drag reduction performances of shock-combustion-hydrocarbon fueled supersonic film cooling interaction under flight Mach 9
Multi-objective structural optimization of long flexible wind turbine blades for enhanced lightweight and reliability
Aerodynamic synergy through cooperative vortex control in Savonius turbine clusters
Bulding a robust CFD model using the Taguchi method for the simulation of dynamic passive self-starting of vertical axis wind turbines
Numerical study of the efficiency of an axial compressor rotor operating at low Reynolds numbers
Optimized empty duct geometry for ducted wind turbines: A prairie dog burrow-inspired approach
Enhancing energy efficiency in aero-engines through multi-fidelity optimization of labyrinth seal design
High-thrust ultralight ion wind engine toward controllable aerial microrobots
The Lifespan Penalties of a Steam Turbine’s Governing Stage Rotor Blade During the Rapid Peak Shaving of New Power System
Effect of plasma actuator on the aerodynamic performance of Darrieus straight-blade vertical axis wind turbine
Supercritical Pyrolysis of Naphthenic Hydrocarbons for Heat Sink Applications
Experimental and reactive molecular dynamic study on the oil-dispersible Pd nanoparticles for cracking aviation kerosene RP-3
Casting deformation and residual stress prediction of turbine blades based on temperature field and geometric constraints
Synergistic heat recovery–dissipation architecture for hydrogen turbofans: Integrated heat current modeling with multi-parameter thermodynamic analysis
Safe reinforcement learning-based energy management for fuel cell hybrid electric aircraft with longevity considerations
Surrogate-enhanced multi-objective optimization of on-board hydrogen production device for carbon-free heavy-duty vehicles
A hub blockage model for small and micro horizontal axis wind turbines
Enhancing Oscillations of Bladeless Wind Energy Harvesters with a Downstream Obstacle for Bluff Body
Effect of Blade-to-Blade Wake Interference on Aerodynamic Performance of Darrieus Vertical Axis Wind Turbines
Thrust optimization control for gas turbine engine afterburner state via model-based deduction learning
Kinetics and Dynamic Study of Kerosene Steam Reforming for SOFC-GT Hybrid Systems
Multi-objective optimization design of a pump-turbine runner based on machine learning method
Comparison of conjugate heat transfer characteristics between regenerative cooling and recooling system for a methane-fueled scramjet
Novel dual-twin model-based nonlinear onboard adaptive modeling method for aircraft engine with fuel measurement uncertainty awareness
Investigation of the Stoichiometric Hydrogen-Air Detonation Evolution in T-shaped Pipeline
Optimizing wind turbine blade performance: A multi-objective approach for power, load and stall characteristics
Thrust estimation in limited ground test data scenarios: A digital twin-driven method for gas turbines with performance variability
Research on the Performance of an Integrated Active Cooling and Propulsion System for Hypersonic Glide Vehicles
Enhanced performance study of energy capture ball valve integrated with a new type of torsional impeller
Modification of thermophysical model by friction theory and comparative analysis of regenerative cooling performance with hydrocarbon fuels
Aerodynamic design and analysis for offshore wind turbine blade model
Novel liquid-piston-coupled adaptable continuous compressed air ejection system: Thermodynamics design and optimization
Heat transfer characteristics and flow distribution behavior of pyrolytic ammonia in scramjet regenerative cooling channels
Atomization dynamics of gas-liquid orifice type pintle injectors at different throttling levels
A Numerical Investigation on Effects of Blades with Varying Chord Length in Darrieus Vertical Axis Wind Turbines
Super-aggressive intermediate turbine duct integrated counter-rotating low-pressure turbine vane: an aerodynamic performance optimization study considering sealing flow
Nonlinear adaptive robust control strategy of thrust regulation for pintle solid-propellant rocket motors
Acoustic vibration correlation study of wind turbine with fused tip structure
A Novel Mixer Design for Gas-Particle Two-Phase Mixing and Combustion in a Wide Mach Range
Performance evaluation of the precooled jet engine with solid oxide fuel cell driven compressor for supersonic transport
Global kinetic modeling in oxidation coking of supercritical hydrocarbon fuel
Investigation of the massflow regulation and temperature drop characteristics for the modulated pre-swirl system based on partial inlet closure
Mixing Characteristics Assessment for a Blade-type Rear Variable Area Bypass Injector in a Variable Cycle Engine
CFD Analysis of Different Leading Edge Tubercles on the Aerodynamic Performance of NREL Phase VI Wind Turbine Blades
Aerodynamic optimization of wind turbine airfoil under dynamic stall condition
Thermodynamic analysis of the chemical regeneration cycle for turboprop engine with ammonia-blended fuel
Performance analysis of a modified Archimedes spiral wind turbine having winglet on blade
Optimization of aerodynamic and anti-flutter performance of wind turbine blade airfoils using a Hybrid Bi-Directional Cooperative Constrained Multi-Objective Evolutionary Algorithm
Comparative ventilation performance and scenario-based applicability of wind-driven turbine ventilators in built environments
Thermodynamic analysis of boron powdered scramjet engine based on supercritical hydrocarbon fuel fluidization technology
New strategy for enhancing Savonius turbine efficiency through delayed flow separation with advanced flow control
Mechanism of flapwise vibration of a wind turbine airfoil under trailing edge windward states using aeroelastic reduced-order model
Research on aero-engine physics-based model correction method based on mechanism fusion residual
Performance Analysis of a Photovoltaic/Thermal System Based on Lunar Regolith Energy Storage for the Lunar Base
Improving the power production of a vertical axis wind turbine by intelligent closed-loop control of synthetic jet actuators
Comprehensive tradeoff and utilization of airborne renewable energy and uncertain stratospheric wind potential based on reinforcement learning
3D numerical analysis of an H-rotor darrieus vertical axis wind turbine in transient regime
Mutually reinforcing performance of energy harvest and wind environment via wind turbine-solar integrated system over a bridge
Aerodynamic investigation and flow loss control on a newly designed leading edge fillet in a high-load turbine
Review of energy management technologies for unmanned aerial vehicles powered by hydrogen fuel cell
Blade Optimization for Hydrodynamic Performance Improvement of a Horizontal Axial River Current Turbine Using Discrete Adjoint Method
Numerical simulation of aerodynamic performance of static airfoil of vertical axis wind turbines under icing conditions
A comprehensive design method to balance efficiency and noise for high-thrust electric UAV propellers
1
Dynamic compression behaviour of innovative geopolymer-based lunar ultra-high performance concrete under ambient and cryogenic temperatures
34
NanoMVG: USV-Centric Low-Power Multi-Task Visual Grounding based on Prompt-Guided Camera and 4D mmWave Radar
Estimation of Aerodynamics Forces in Dynamic Morphing Wing Flight
TRACER: Thrust Auto-calibration and Ground Effect Estimation Using Onboard Force Sensitive Resistor Array for Multirotors
PosePilot: Steering Camera Pose for Generative World Models with Self-supervised Depth
Learning-Based Passive Fault-Tolerant Control of a Quadrotor with Rotor Failure
Design of a Six-Bar Linkage-Inspired Reversible Wing for Stopped-Rotor Vehicles
Localization of an Unmanned Underwater Vehicle Using a Tethered Cooperative Surface Vehicle and Hybrid EKF/Grid-Based Method
Abdominal Undulation with Compliant Mechanism Improves Flight Performance of a Biomimetic Robotic Butterfly
Prescribed-Time Safe Pursuit Control with Dynamic Obstacle and Occlusion Avoidance
Hybrid Control Approach for Walking-Assembly Integrated Space Robots in On-Orbit Assembly*
Secure Safety Filter: Towards Safe Flight Control under Sensor Attacks
A Spatiotemporal Downwash Modeling for Agile Close-Proximity Multirotor Flight
Achieving Lift-to-Weight Ratio >3.5 in Piezoelectric Direct-Driven Insect-Scale Flapping-Wing MAVs
VisLanding: Monocular 3D Perception for UAV Safe Landing via Depth-Normal Synergy
Efficient and Precise Drone Rephotography for Video Sequences
Thermal Updraft Profiling with an Array of Show Drones
UAV Video Deblurring via Motion-Aware Diffusion: A Path to Robust Target Detection
Servo-Driven Flapping Robot that Uses Its Tail for Self-Standing Takeoff
Collaborative Swarm Shape Reconstruction of Tumbling Space Targets via Decentralized Dynamic Factor Graph Optimization
Enabling On-Chip Adaptive Linear Optimal Control via Linearized Gaussian Process
VDTF-ACT: ACT-based Multimodal Space Fine Manipulation Method with Visual Depth Tactile Fusion
Application of soft constraints on mirror position to improve robustness of optical target positioning in shallow water
MPC-based Deep Reinforcement Learning Method for Space Robotic Control with Fuel Sloshing Mitigation
Positioning with respect to a cylinder using proximity-based control
Eagle-Scale Flapping-Wing Robot with Aggressive Roll Maneuverability: Bio-Inspired Actuation, Fluid-Structure Interaction Simulation and Flight Experiment
Precision Autonomous Landing of UAV on High-Speed Vehicles Based on Enhanced Gimbal Stabilization and Smooth Trajectory Generation
Haptic Shared Control of a Pair of Microrobots for Telemanipulation using Constrained Optimization
Robots Calling the Shots: Using Multiple Ground Robots for Autonomous Tracking in Cluttered Environments
Geometric Retargeting: A Principled, Ultrafast Neural Hand Retargeting Algorithm
Automatic Alignment of the Micropipette for Efficient and Precise Cell Micromanipulation
Self-Supervised Monocular Visual Drone Model Identification through Improved Occlusion Handling
Absolute Localization through Vision Transformer Matching of Planetary Surface Perspective Imagery from a Digital Twin
EventSync: Joint Recovery of Temporal Offsets and Relative Orientations for Wide-Baseline Event Cameras
PEACE: Prompt Engineering Automation for CLIPSeg Enhancement for Safe-Landing Zone Segmentation
3
Multi-physical topology optimization of hydrogen-driven solid oxide fuel cells toward advanced hybrid power systems for green unmanned aerial vehicles
In-situ reactivation of the catalyst for hydrodeoxygenation of bio-oil to biofuel by coupling the self-rotation and revolution of catalysts in the swirling flow
Energy-saving low-frequency vibration-assisted riveting process for joining high-strength metallic structures with enhanced performance
3
Improved Intrinsic Thermal Conductivity of Highly Crystalline Polyimide Films by Regulating Aggregation Structures
Fabrication of High-Performance Isocyanate-Based Polyimide Films via a Bridging Strategy
Multiblock Copolyimide Exhibiting High Flexibility and Low Thermal Volumetric Expansion owing to Negative Thermal Expansion of PDMS Nanodomain
2
Kirigami-inspired parachutes with programmable reconfiguration
Photophoretic flight of perforated structures in near-space conditions
2
A membrane Sabatier system for water recovery and rocket propellant production
Mitigating hypersonic heat barrier via direct cooling enhanced by leidenfrost inhibition
1
Field-free subnanosecond spin-orbit torque switching designed by reinforcement learning
2
Equation-of-state-informed pulse profile modeling
FLAG review 2024
8
Measurement of the Alfvén Wave Parametric Decay Instability Growth Rate
Guiding Fast Ion Beam by Suppressing Secondary Ions
Ion Mix Can Invert Centrifugal Confinement
Demonstration of a Novel Phase-Space Painting Method in a Coupled Lattice to Mitigate Space Charge in High-Intensity Hadron Beams
First Demonstration of Resonant Pitch-Angle Scattering of Relativistic Electrons by Externally Launched Helicon Waves
Dual-Time-Scale Ion Acceleration Dynamics in Hall Thrusters
Three-Dimensional Helical-Rotating Plasma Structures in Beam-Generated Partially Magnetized Plasmas
Drift-Energy Replacement Effect in Multi-ion Magnetized Plasma
1
Persistent Spin Currents in Superconducting Altermagnets
4
Microraptor reveals specialized gliding capabilities in multiwinged early paravians
Structural dynamics and neural representation of wing deformation
Universal vortex formation time of flapping flight
Scaling and mechanical optimality of bristled wings in microinsects
3
Reconfigurable modular origami for tunable 2D symmetry groups
Flapping-wing robot achieves bird-style self-takeoff by adopting reconfigurable mechanisms
Biomaterials for organically generated habitats beyond Earth

Numerical information only (in the tables above) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.